LG Electronics USA E1941PX LCD Monitor User Manual Manual19 E1941CP ENG
LG Electronics USA LCD Monitor Manual19 E1941CP ENG
E1941PX_User Manual-1
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. 19 The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. OWNER’S MANUAL Important Precautions Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, on Cleaning: NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. 1. Lift the monitor to its highest height to utilize the Pivot function. 2. Landscape & Portrait : You can rotate the panel 90o clockwise: Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. 5. When you desire to disintegrate the monitor from the stand base, use a 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attached to this product before shipping out.) CHEMICALS WATER User's Guide / Cards On Repacking: 2. Assemble the Stand Base into the Stand Body. Be sure don't pull out the Stop Pin and make the Stand Base direction as shown. Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal: Tilt Range : -5˚~ 16˚ Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. NOTE This accessories may look different from those shown here. A Connect D-sub(Analog signal) Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. AUTO Button PROCESSING AUTO IMAGE ADJUSTMENT Head section Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure. 3. Be careful with the cables when rotating the screen. 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. 06 Use this button to enter SUPER ENERGY SAVING menu. For more information, refer to page 15. AUTO IMAGE ADJUSTMENT Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu MENU SUPER ENERGY SAVING Control MENU Button OSD LOCKED OSD UNLOCKED Power Button NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. EXIT Button Power Button & Power Indicator The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking white. Function OSD LOCKED / UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Supported input BRIGHTNESS DSUB Description To adjust the brightness of the screen ORIGINAL RATIO To adjust the image size COLOR TEMP To customize the color of the screen (PRESET / USER) To adjust the contrast of the screen CONTRAST Exit the OSD(On Screen Display). Use this button to turn the display on or off. Sub-menu SUPER ENERGY SAVING SUPER ENERGY SAVING : D-SUB(Analog signal) input DSUB To make adjustments in the On Screen Display, follow these steps: When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is On Screen Display(OSD) Selection and Adjustment E1941CP: 1366 x 768 Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Stand section Function SUPER ENERGY SAVING Button SUPER ENERGY SAVING When using a D-Sub signal input cable connector for Macintosh: Wall-outlet type Product Handling with Care : When you lift up or move the product, do not hold or touch the front part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover of the product.) On Screen Display (OSD) Control Adjustment Control in order, then tighten When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). 05 Control Panel Functions Controles do painel frontal IMPORTANTE WARNING The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up. Otherwise, you may be injured by the protruding sections of the stand. 04 Control Panel Functions Varies according to model. 16º Stand Base 03 system, and other attached devices is turned off. 2. Connect signal input cable 1 and power cord 2 the screw of the signal cable. 1 Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Stand Body User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores to maintain standard compliance for the product. 1. Before setting up the monitor, ensure that the power to the monitor, the PC IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. - After installation, adjust the angle as shown below. Stop Pin Power Cord Avoid high temperatures and humidity. Connecting with the PC - The pivot function allows you to rotate the screen 90 degrees clockwise. made to the female part of the cable you're attaching. coin to turn the screw counterclockwise. Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Connecting the Display 3 Using the Pivot function cloth. 4. Lift and turn the monitor to face towards the front after the connection is 02 Connecting the Display to tighten. 1. Place the monitor with its front facing downward on a cushion or soft Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen. 01 3. Use a coin on the back of the stand base and turn the screw clockwise Connecting the stand base /Removing the stand base Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. Please read this manual carefully before operating your set and retain it for future reference. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off. Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Connecting the Display Connecting the Display Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not Open the Display: There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock. Accessories To customize the screen status for a user's operating environment LANGUAGE Press the discretionary Button, then the main menu of the OSD appears. FACTORY RESET To access a control, use the corresponding Buttons. Use the / Use the Button Buttons to adjust the image to the desired level. to select other sub-menu items. SUPER ENERGY SAVING Press the EXIT Button to exit from the OSD. ON Turn on the SUPER ENERGY SAVING function. OFF Turn off the SUPER ENERGY SAVING function. RESET Initialize the SUPER ENERGY SAVING and set to "OFF" mode. DSUB NOTE The order of icons may differ depending on the model (12 ~ 17). ‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. 08 08 09 08 Printed in Brazil P/NO: MFL67870101_rev00 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu / Description On Screen Display(OSD) Selection and Adjustment Main menu Sub menu / Description CONTRAST BRIGHTNESS On Screen Display(OSD) Selection and Adjustment Ajuste e seleção do OnSelection Screen and Display (OSD) On Screen Display(OSD) Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Main menu DESLIGADO 11 On Screen Display(OSD) Selection and (OSD) Adjustment Ajuste e seleção do On Screen Display Sub menu / Description REINICIAR To adjust the contrast of the screen. NOTE WIDE Switch to full screen mode according to input image signal. Press the SUPER ENERGY SAVING Button, then the main menu of the OSD appears. LANGUAGE Turn on the SUPER ENERGY SAVING fuction. When current setting value is ON,the SUPER SAVING color is green. 19 inch SUPER SAVING LED SAVING LIGADO ORIGINAL To choose the language in which the control names are displayed. Change the input image signal ratio to original. * This function works only if input resolution is lower than monitor ratio (16:9). DESLIGADO REINICIAR SubLIGADO PRESET Select the screen color. menus Press the immediately. LIGADO DESLIGADO Is the power indicator flickering? • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. Restart to select sub-menu levels. OSD (On Screen Display) menu languages on the monitor may differ from the manual. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. On the screen background, vertical bars or stripes are visible. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Do you see “OSD LOCKED” when you push MENU button? NOTE Display Position is incorrect. •This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. REINICIAR Exit Move Button Tip Exit : Exit : Move : Select another sub-menu • Press the Power button. Do you see a "OSD LOCKED" message on the screen? GREEN: Set your own green color levels. BLUE: Set your own blue color levels. Is the power indicator light on? Do you see a "CHECK SIGNAL CABLE" message on the screen? buttons to reset USER RED: Set your own red color Exit : Sair : Mover : Selecionar outro submenu • Check and see if the power cord is connected properly to the power outlet. • This message appears when the signal Do you see an "OUT OF RANGE" message from the PC (video card) is out of horizontal or vertical frequency range of the display. on See the 'Specifications' section of this the screen? manual and configure your display again. Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values. Restore all factory default settings except "LANGUAGE." Display image is incorrect Is the power cord of the display connected? SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function. Turn off the SUPER ENERGY SAVING function.Now the monitor is LED SAVING function. When current setting value is OFF,the SUPER SAVING color is gray. RESET TOTAL REDUÇÃO CO2:16g FACTORY RESET • WARM: Set the screen to warm color temperature . • MEDIUM: Set the screen to medium color temperature. • COOL: Set the screen to cool color temperature. (1/2) REINICIAR TOTAL DE REDUÇÃO DE POTÊNCIA:20W Icons COLOR TEMP DESLIGADO LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. OFF (1/2) Troubleshooting Troubleshooting No image appears SAVING DATA(W/h): Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. ORIGINAL RATIO 12 Check the following before calling for service. ON LIGADO To adjust the brightness of the screen. 10 Exit : Exit : Move : Select another sub-menu OK : Select • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. TOTAL POWER REDUCTION How much power is saved during using the monitor. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. TOTAL CO2 REDUCTION Change the TOTAL POWER REDUCTION to CO2. 13 Troubleshooting 14 Specifications The screen color is mono or abnormal. Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size (cm): Pixel pitch (mm) Display • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Sync Input • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. The screen blinks. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Horizontal Freq. (Automatic) Vertical Freq. (Automatic Input Form Video Input 15 pin D-Sub Connector Plug&Play Plug&Play 1366 x 768@60Hz 1366 x 768@60Hz (cm • pol.) Height Min. (cm • pol.) Height Max. (cm • pol.) Depth (cm • pol.) Without Stand Width (cm • pol.) Height (cm • pol.) Depth (cm • pol.) 44,30 • 17,44 34,00 • 13,38 44,80 • 17,64 16,60 • 6,54 Weight(excl. packing) (Kg • libras) 3,4 • 7,49 Tilt - 5° ~ 16° Environment Operating Conditions al Conditions Temperature Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1366 x 768 31,468 31,469 37,500 37,879 46,875 49,725 48,363 60,123 47,712 70 60 75 60 75 75 60 75 60 *9 After moving the product to face downward, make sure to place it on a soft cloth or a cushion to avoid surface damage. FCC Compliance Statement 3. Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. *Recommend Mode Indicator MODE On Mode Sleep Mode Off Mode Wall Mount pad Separate the head and the stand with the use of a screwdriver. LED Color Blue Blue Blinking Off This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. 44,30 • 17,44 28,50 • 11,22 5,5 • 2,16 Attached ( Note If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures: Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. -20 °C to 60 °C 5 % to 90 % non-Condensing Stand Base Power cord Power Input (AC 100 - 240 V~ 50 / 60 Hz) Regulatory Information Screw Mounting Interface Dimension Hole spacing: 75 mm x 75 mm 10 °C to 35 °C 10 % to 80 % non-Condensing Humidity Storage Conditions Temperature Humidity 20 E1941CP DDC 2AB 11W(Typ.) < 0,3 W < 0,3 W Dimensions With Stand & Weight Width NOTE 56 Hz a 75 Hz RGB Analog (0.7 Vp-p/ 75 ohm) Max (VESA) Recommend (VESA) • Make sure to check if the video card supports Plug&Play function. 30 kHz a 61 kHz Input Form Off Mode Have you installed the display driver? 47,0 0,300 x 0,300 Separate Sync. On Mode Power Consumption Sleep Mode Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? 18,5 inch Signal Input Resolution This monitor satisfies the specifications of the Wall mount plate or the interchange device. Preset Modes (Resolution) 19 18 17 Installing the Wall mount plate Installing the Wall mount plate Specifications E1941CP Display image is incorrect 16 15 NOTE VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications Please use VESA standard as below. * 784.8 mm and under (30.9 inch) - Wall Mount Pad Thickness : 2.6 mm - Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm * 787.4 mm and above (31.0 inch) - Please use VESA standard wall mount pad and screws. ), Detached ( O ) Wall-outlet type 0,8 A NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Information in this document is subject to change without notice. 21 22 23 24 25 26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Format : application/pdf Title : Manual19_E1941CP_ENG Creator Tool : Adobe Illustrator CS5 Create Date : 2013:05:14 11:39:43-02:00 Modify Date : 2013:05:14 11:39:43-03:00 Metadata Date : 2013:05:14 11:39:43-03:00 Thumbnail Width : 232 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 28367 bytes, use -b option to extract) Document ID : xmp.did:D6D4AD9E8ABCE211BD9E90968CAF34DE Instance ID : uuid:da346f08-3443-4dcf-a471-28b462201313 Original Document ID : uuid:C3819F07A2A0DF11AE4A9D51E8D47FFA Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : uuid:08138ce6-4aa7-4b66-adf9-7eb0a69bb494 Derived From Document ID : xmp.did:AADB59DCCFB0E211B8C2A09377237FCF Derived From Original Document ID: uuid:C3819F07A2A0DF11AE4A9D51E8D47FFA Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:B8CC93FD76EEDF11924B8CFD0B6DC239, xmp.iid:15C0F2B0B8F1DF11B0C2E220898232A2, xmp.iid:B003B7BE6638E011B8DB8A4E52E91465, xmp.iid:6B58B5A18E45E011A657AA9ADA275C93, xmp.iid:58C0930E1F8EE0118150DDB7BC798CBB, xmp.iid:E39902F055A9E011B63DD3914E8E6A88, xmp.iid:553BEAEEBCB2E0119E4FCF61AE113EAA, xmp.iid:CFA798A573D2E011A6D0C9F2B2955101, xmp.iid:62055489E8DEE011B6459B2295C63E56, xmp.iid:E2261BDE76E3E0118C27BF65FE1BF62E, xmp.iid:DADEA5BAA819E11198AD8C060BE1B053, xmp.iid:C691A375CA83E111BC6BF1011B1B7B0D, xmp.iid:5669382369D2E111A30A9D792F53B449, xmp.iid:5769382369D2E111A30A9D792F53B449, xmp.iid:FACCFE679DD2E111A30A9D792F53B449, xmp.iid:AADB59DCCFB0E211B8C2A09377237FCF, xmp.iid:D6D4AD9E8ABCE211BD9E90968CAF34DE History When : 2010:11:12 15:51:37-02:00, 2010:11:16 17:47:39-02:00, 2011:02:14 16:17:55-02:00, 2011:03:03 09:06:12-03:00, 2011:06:03 17:21:26-03:00, 2011:07:08 09:09:36-03:00, 2011:07:20 09:31:08-03:00, 2011:08:29 16:44:37-03:00, 2011:09:14 17:27:38-03:00, 2011:09:20 11:22:45-03:00, 2011:11:28 17:17:12-02:00, 2012:04:11 12:38:26-03:00, 2012:07:20 15:47:17-03:00, 2012:07:20 15:47:41-03:00, 2012:07:20 16:12:54-03:00, 2013:04:29 10:22:37-03:00, 2013:05:14 11:39:33-03:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / Startup Profile : Print N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 762.000000 Max Page Size H : 750.000043 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, Arial-Black, Helvetica-Bold, Tahoma Font Family : Arial, Arial, Arial Black, Helvetica, Tahoma Font Face : Regular, Bold, Regular, Bold, Regular Font Type : Open Type, Open Type, TrueType, TrueType, Open Type Font Version : Version 5.10, Version 5.08, Version 2.20, 001.007, Version 5.10 Font Composite : False, False, False, False, False Font File Name : arial.ttf, arialbd.ttf, Ariblk_0.ttf, Helve2.TTF, tahoma.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Cyan : 80.000001 Swatch Groups Colorants Magenta : 5.000001 Swatch Groups Colorants Yellow : 10.000002 Swatch Groups Colorants Black : 0.000000 Swatch Groups Group Name : Grayscale Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: K=5 Swatch Groups Colorants Mode : GRAY Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Gray : 12 Producer : Adobe PDF library 9.90 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 1 Creator : Adobe Illustrator CS5EXIF Metadata provided by EXIF.tools