LG Electronics USA E2341TX Part15 Subpart B-LCD Monitor User Manual W19 2243S T ENG
LG Electronics USA Part15 Subpart B-LCD Monitor W19 2243S T ENG
Contents
- 1. BEJE2341TX_User Manual 1
- 2. BEJE2341TX_User Manual 2
- 3. BEJE2341TX_User Manual 3
BEJE2341TX_User Manual 2
s. , 14 15 Turn on the SUPER ENERGY SAVING function. Turn off the SUPER ENERGY SAVING function. Now the monitor is LED SAVING function. 17 SAVING DATA: 19 inch 20 inch 22 inch 23 inch 24 inch Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor. LG accumulate those values using integrated function with 10 minutes broadcast video signal. LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function. 18 Troubleshooting Check the following before calling for service. No image appears ● Is the power cord of the • Check and see if the power cord is connected properly to the power outlet. display connected? ● Is the power indicator light on? • Press the Power button. ● Is the power indicator flickering? • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. ● Do you see an "OUT OF • This message appears when the signal from the PC (video card) is out of horizontal or vertical RANGE" message on frequency range of the display. See the the screen? 'Specifications' section of this manual and configure your display again. ● Do you see a "CHECK SIGNAL CABLE" message on the screen? • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen? ● Do you see “OSD LOCKED” when you push MENU button? • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. 19 Troubleshooting Display image is incorrect ● Display Position is incorrect. • Press the AUTO button to automatically adjust your display image to the ideal setting. ● On the screen background, vertical bars or stripes are visible. • Press the AUTO button to automatically adjust your display image to the ideal setting. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO button to automatically adjust your display image to the ideal setting. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. 20 Troubleshooting Display image is incorrect ● The screen color is mono or abnormal. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. ● The screen blinks. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? ● Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. • Make sure to check if the video card supports Plug&Play function. 21 47.0 cm ≤ ≤ NOTE Information in this document is subject to change without notice. 22 Specifications E1941S Display 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0 cm 0.300 mm x 0.300 mm (Pixel pitch) Sync Input Horizontal Freq. Vertical Freq. Input Form 30 kHz to 61 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max Recommend VESA 1366 x 768 @60 Hz VESA 1366 x 768 @60 Hz Plug&Play DDC 2AB Power Consumption On Mode Sleep Mode Off Mode Dimensions & Weight With Stand Width 44.30 cm (17.44 inch) Height 35.00 cm (13.78 inch) Depth 16.60 cm ( 6.54 inch) ≤ ≤ Weight(excl. packing) Range 18 W(Typ.) 0.3 W 0.3 W Without Stand Width 44.30 cm (17.44 inch) Height 28.50 cm (11.22 inch) Depth 5.5 cm ( 2.16 inch) 2.4 kg (5.29 lb) Tilt : -5˚ to 15˚ Power Input Environment al Conditions Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( Power cord Wall-outlet type ), Detached ( O ) NOTE Information in this document is subject to change without notice. 23 Specifications E2041T Display 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8 cm 0.2766 mm x 0.2766 mm (Pixel pitch) Sync Input Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Recommend VESA 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 Hz Plug&Play DDC 2B(Digital),DDC2AB(Analog) Power Consumption On Mode Sleep Mode Off Mode Dimensions & Weight With Stand Width 47.60 cm (18.74 inch) Height 36.40 cm (14.33 inch) Dept 16.60 cm ( 6.54 inch) ≤ ≤ Weight(excl. packing) 20 W(Typ.) 0.3 W 0.3 W Without Stand Width 47.60 cm (18.74 inch) Height 30.30 cm (11.92 inch) Depth 5.70 cm ( 2.24 inch) 2.6 kg (5.73 lb) Range Tilt : -5˚ to 15˚ Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( Power cord Wall-outlet type ), Detached ( O ) NOTE Information in this document is subject to change without notice. 24 Specifications E2041S Display 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8 cm 0.2766 mm x 0.2766 mm (Pixel pitch) Sync Input Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max Recommend VESA 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 Hz Plug&Play DDC 2AB Power Consumption On Mode Sleep Mode Off Mode Dimensions & Weight With Stand Width 47.60 cm (18.74 inch) Height 36.40 cm (14.33 inch) Dept 16.60 cm ( 6.54 inch) ≤ ≤ Weight(excl. packing) 20 W(Typ.) 0.3 W 0.3 W Without Stand Width 47.60 cm (18.74 inch) Height 30.30 cm (11.92 inch) Depth 5.70 cm ( 2.24 inch) 2.6 kg (5.73 lb) Range Tilt : -5˚ to 15˚ Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( Power cord Wall-outlet type ), Detached ( O ) NOTE Information in this document is subject to change without notice. 25 Specifications E2241T Display 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm 0.248 mm x 0.248 mm (Pixel pitch) Sync Input Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B(Digital),DDC2AB(Analog) Power Consumption On Mode Sleep Mode Off Mode Dimensions & Weight With Stand Width 50.90 cm (19.80 inch) Heigh 38.80 cm (15.27 inch) Depth 16.60 cm ( 6.54 inch) ≤ ≤ Weight(excl. packing) 24 W(Typ.) 0.3 W 0.3 W Without Stand Width 50.90 cm (19.80 inch) Height 32.20 cm (12.67 inch) Depth 5.80 cm ( 2.28 inch) 2.9 kg (6.39 lb) Range Tilt : -5˚ to 15˚ Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( Power cord Wall-outlet type ), Detached ( O ) NOTE Information in this document is subject to change without notice. 26 Specifications E2241S Display 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm 0.248 mm x 0.248 mm (Pixel pitch) Sync Input Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2AB Power Consumption On Mode Sleep Mode Off Mode Dimensions & Weight With Stand Width 50.90 cm (19.80 inch) Heigh 38.80 cm (15.27 inch) Depth 16.60 cm ( 6.54 inch) ≤ ≤ Weight(excl. packing) 24 W(Typ.) 0.3 W 0.3 W Without Stand Width 50.90 cm (19.80 inch) Height 32.20 cm (12.67 inch) Depth 5.80 cm ( 2.28 inch) 2.9 kg (6.39 lb) Range Tilt : -5˚ to 15˚ Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( Power cord Wall-outlet type ), Detached ( O ) NOTE Information in this document is subject to change without notice. 27 Specifications E2341T Display 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 58.4 cm 0.265 mm x 0.265 mm (Pixel pitch) Sync Input Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B(Digital),DDC2AB(Analog) Power Consumption On Mode Sleep Mode Off Mode Dimensions & Weight With Stand Width 54.60 cm (21.49 inch) Height 40.70 cm (16.02 inch) Depth 20.20 cm ( 7.95 inch) ≤ ≤ Weight(excl. packing) 28 W(Typ.) 0.3 W 0.3 W Without Stand Width 54.60 cm (21.49 inch) Height 34.20 cm (13.46 inch) Depth 5.7 cm ( 2.24 inch) 3.4 kg (7.49 lb) Range Tilt : -5˚ to 15˚ Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( Power cord Wall-outlet type ), Detached ( O ) NOTE Information in this document is subject to change without notice. 28 Specifications E2441T Display 60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 60.97cm 0.277 mm x 0.277 mm (Pixel pitch) Sync Input Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B(Digital),DDC2AB(Analog) Power Consumption On Mode Sleep Mode Off Mode Dimensions & Weight With Stand Width 56.93 cm (22.41 inch) Height 41.91 cm (16.50 inch) Depth 17.93 cm ( 7.05 inch) ≤ ≤ Weight(excl. packing) 25 W(Typ.) 0.3 W 0.3 W Without Stand Width 56.93 cm (22.41 inch) Height 35.43 cm (13.94 inch) Dept 5.93 cm ( 2.33 inch) 4.0 kg (8.81 lb) Range Tilt : -5˚ to 15˚ Power Input AC 100-240 V~ 50 / 60 Hz 1.2 A Environment al Conditions Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Attached ( Power cord Wall-outlet type ), Detached ( O ) NOTE Information in this document is subject to change without notice. 29 Specifications Preset Modes (Resolution) E1941T/E1941S *If you can’t select 1366 x 768 in display property timing option, please update your video card driver from your video card vendor. Display Modes (Resolution) *9 Horizontal Freq. (kHz) Vertical Freq. (Hz) 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 47.712 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1366 x 768 70 60 75 60 75 75 60 75 60 *Recommend Mode E2041T/E2041S Display Modes (Resolution) *9 Horizontal Freq. (kHz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 60.000 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1600 x 900 Vertical Freq. (Hz) 70 60 75 60 75 60 75 75 60 *Recommend Mode 30 Specifications E2241T/E2241S/E2341T/E2441T Display Modes (Resolution) 10 11 *12 Horizontal Freq. (kHz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 65.290 67.500 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 Vertical Freq. (Hz) 70 60 75 60 75 60 75 75 60 75 60 60 *Recommend Mode Indicator MODE On Mode Sleep Mode Off Mode LED Color Blue Blue Blinking Off 31 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Remove the Stand Body and Stand Base from product in correct direction as shown in the picture. 32 Installing the Wall mount plate 3. Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.Hole spacing : 75 mm x 75 mm. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. NOTE VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications Please use VESA standard as below. * 784.8 mm and under (30.9 inch) - Wall Mount Pad Thickness : 2.6 mm - Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm * 787.4 mm and above (31.0 inch) - Please use VESA standard wall mount pad and screws. 33 Make sure to read the Safety Precautions before using the product. Keep the OWNER’S MANUAL(CD) in an accessible place for furture reference. The model and serial number of the SET is located on the back or one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2010:11:25 16:07:54+08:00 Create Date : 2010:11:25 16:07:44+08:00 Metadata Date : 2010:11:25 16:07:54+08:00 Creator Tool : QuarkXPressª: LaserWriter 8 KH-8.7.1 Format : application/pdf Title : W19_2243S(T)-ENG Creator : KJY Document ID : uuid:6aec2194-efc3-4006-b00b-914ea90ed2b7 Instance ID : uuid:60aae1f1-d9ec-466f-9682-12deaf9ae160 Producer : Acrobat Distiller 4.0 for Macintosh Has XFA : No Page Count : 23 Author : KJYEXIF Metadata provided by EXIF.tools