LG Electronics USA E2411PX Part15 Subpart B-LCD Monitor User Manual W19 2243S T ENG

LG Electronics USA Part15 Subpart B-LCD Monitor W19 2243S T ENG

Contents

BEJE2411PX_User Manual 2

www.lg.comOWNER’S MANUALLCD MONITOR LCD MONITOR MODELE2211PBE2411PBPlease read this manual carefully before operating your set and retain it for future reference.ENGLISH
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects orother reproductive harm. Wash hands after handling.
1Safety PrecautionsPlease read these safety precautions carefully before using the product.Failure to follow those warnings may result in death, serious injury or damage to theproduct or other property.WarningElectrical Power Related PrecautionsUse only the power cord supplied with the unit or another manufacturer authorized cord.- Failure to do so may result in fire or electrical shock or damage to the product.Use only a properly grounded plug and receptacle.- If you do not you may be electrocuted or injured. Or the product might be damaged.Do not use a damaged or loose plug.- This may cause electrical shock or fire.Operate the display only from a power source(i.e. voltage) indicated in the product specification.- Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure whattype of power supply you have, consult a certified electrician.In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.- It can cause electric shock. Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.- A fire can break out due to overheating.Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust,dry the power plug completely or wipe dust off before plugging in the cord.- You may be electrocuted due to excess moisture.If you don’t intend to use the product for a long time, unplug the power cable from the product.- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.Insert the power plug firm so it cannot come loose.- A loose connect can cause fire.Hold the plug when pulling out the power cable. Do not pull the plug out by the wire. Do not bend thepower cord with excessive force or put heavy objects on the power cord.- The power line can be damaged, which may cause electric shock or fire.Do not insert conductive material (ea. metal chopstick) into the product opening into one end of thepower cable while the other end is plugged in. Additionally, do not touch the power cable right afterplugging into the wall input terminal.- You may be electrocuted.The power supply cord is used as the main disconnection device. Ensure that the socket-outlet shallbe installed near the equipment and shall be easily accessible.Do not unplug the power cord while the product is in use.- Electrical shock can damage the product.As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC powersource even if the unit is turned off.Warning
2Safety PrecautionsPrecautions in installing the ProductWarningKeep away from heat sources like electrical heaters, curdles or other open flames.- Electrical shock, fire, malfunction or deformation may occur.Keep the packing anti-moisture material or vinyl packing out of the reach of children.- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit thenearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.Do not put heavy objects on the product on sit upon it. - If the product collapses or is dropped, you may be injured. Children must pay particular attention.Do not leave the power or signal cable when someone can trip over it.- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.Install the product in a neat and dry place. Do not use near water.- Dust or moisture can cause electrical shock, fire or product damage. Do not add accessory that have not been designed for this display.If you smell smoke or other odors or hear a strange sound from the product unplug the power cord andcontact the service center. - If you continue to use without taking proper measures, electrical shock or fire can occur.If you dropped the product or the case is broken, turn off the product and unplug the power cord. - If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product.- It can cause injury to humans, problems to the product and damage the display. Keep out of reach of children and do not place toys near the product.Make sure the product ventilation hole is not blocked. Install the product more than 10cm from the wall.- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-up.Do not cover the product with cloth or other material (eg. plastic) while plugged in. - The product can be deformed or fire can break out due to internal overheating inside the product.Place the product on a flat and stable surface that is large enough to support the product.- If the product is dropped, you may be injured or the product may be broken.Install the product where no Electromagnetic Interference occurs.Keep the product away from direct sunlight.- The product can be damaged.Do not place the product on the floor.- Small Children and others may trip over it.Precautions in Moving the ProductWarningMake sure to turn off the product.- You may be electrocuted or the product can be damaged.Make sure to remove all cables before moving the product.- You may be electrocuted or the product can be damaged.When lifting or moving the product, do not hold it upside down while holding only the stand.- This may cause the product to fall resulting in damage or injury.Do not shock the product when moving it.- You may be electrocuted or the product can be damaged.
3Safety PrecautionsPrecautions in Using/Cleaning the ProductWarningDo not attempt to disassemble, repair or modify the product yourself.- Fire or electric shock can occur.- Contact the service center for repair.When cleaning the product, unplug the power cord and scrub gently with a soft cloth to preventscratching. Do not clean with a wet cloth. Or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)Keep the product away from water.- Fire or electric shock accident can occur.Avoid high temperatures and humidity. Do not put or store flammable substances near the product.- There is a danger of explosion or fire.Keep the product clean at all times.Take a comfortable and natural position when working with a product to relax the muscles.Take a regular break when working with a product for a long time.Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.Keep proper distance from the product and rest from time-to-time.- Your vision may be impaired if you look at the product too closely or fpr too long.Set the appropriate resolution by referring to the User’s Guide.- Your vision can be impaired.Keep small accessories out of the reach of children.Leaving a fixed image on the screen for a long time may cause damage to the screen and cause imageburn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not coveredby the warranty on this product.Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only.Too much moisture may cause staining. Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regulations of your local authority.Make sure the panel faces forward and hold it with both hands to move.- If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized theservice center for repair.Do not place the product face down.- This may damage the TFT-LCD screen.On Disposal
4Safety PrecautionsNOTEThe manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.NOTEThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and the receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.NOTEFor displays with glossy bezels the user should consider the placement of thedisplay as the bezel may cause disturbing reflections from surrounding lightand bright surfaces.
5Accessories!!! Thank for selecting LGE products !!! Please make sure the following items are included with yourmonitor. If any items are missing, contact your dealer.User's Guide/Cards Power Cord15-pin D-Sub Signal Cable(To set it up, this signal cable may beattached to this product beforeshipping out.)DVI-D Signal Cable(This feature is not available in allcountries.)NOTEThis accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferritecores (core in the connector) to maintain standard compliance for the product.
6Connecting the Display E2211PBBefore setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices are turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth.2.Assemble the Stand Base into the Stand Body.Be sure don't pull out the Stop Pin and make the Stand Base direction as shown. WARNING The tape and locking pin may only be removed from those monitors equipped with astanding base when the base is pulled up. Otherwise, you may be injured by the protrudingsections of the stand.Product Handling with Care: When you lift up or move the product, Do Not hold or touch thefront part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover ofthe product.)Stand BaseStand BodyStop Pin
7Connecting the Display E2211PBIMPORTANTThis illustration depicts the general model of connection. Your monitor may differ from the itemsshown in the picture.Do not carry the product upside down holding only the stand base. The product may fall and getdamaged or injure your foot.3. Use a coin on the back of the stand base and turn the screw clockwise to tighten.4.Lift and turn the monitor to face towards the front after the connection is made to the female part of the cable you're attaching.Removing the stand base1. Place the monitor with its front facing downward on a cushion or soft cloth.2. When you desire to disintegrate the monitor from the stand base, use a coin to turn the screw counterclockwise.
8Connecting the Display E2411PBBefore setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices are turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth.2.Assemble the Stand Base into the Stand Body.Be sure don't pull out the Stop Pin and make the Stand Base direction as shown. WARNING The tape and locking pin may only be removed from those monitors equipped with astanding base when the base is pulled up. Otherwise, you may be injured by the protrudingsections of the stand.Product Handling with Care: When you lift up or move the product, Do Not hold or touch thefront part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover ofthe product.)Stand BaseStand BodyStop Pin3. Once assembled take the monitor up carefully and face the front side.
9Connecting the Display E2411PBIMPORTANTThis illustration depicts the general model of connection. Your monitor may differ from the itemsshown in the picture.Do not carry the product upside down holding only the stand base. The product may fall and getdamaged or injure your foot.Removing the stand base1. Place the monitor with its front facing downward on a cushion or soft cloth.2. While pressing the latches, push the stand base in the direction of the arrow to separatefrom the stand body.
10Connecting the DisplayHeight Range : maximum 4.33 inches (110.0 mm)* Please be sure to remove the Locking pin to adjust the height. 110.0 mmPositioning your displayAfter installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort.Tilt RangeSwivel Range : 356˚
11Connecting the DisplayERGONOMICIt is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tiltangle of the monitor should not exceed 5 degrees.WARNINGYou do not need to replace the Locking pin after it is removed, to adjust its height. When adjusting the angle of the screen, do not put your finger(s) inbetween the head of the monitor and the stand body. You can hurt yourfinger(s).When adjusting the height of the screen, do not put your finger(s) inbetween the head of the monitor and the stand base. You can hurt yourfinger(s).
12Connecting the Display-The pivot function allows you to rotate the screen 90 degrees clockwise. 1.Lift the monitor to its highest height to utilize the Pivot function.2.Landscape & Portrait : You can rotate the panel 90o clockwise. Please be cautious and avoid contact between the monitor head and theStand Base when rotating the screen to access the Pivot function. If themonitor head touches the Stand Base, then the Stand Base could crack.3.Be careful with the cables when rotating the screen. Using the Pivot functionStand sectionHead section
13Connecting the DisplayABConnect DVI-D(Digital signal) CableConnect D-sub(Analog signal) Cable 1. Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. 2.Connect signal input cable and power cord in order, then tighten the screwof the signal cable. Connecting with the PC 12Wall-outlet typeMac adapter : For Apple Macintosh use, aseparate plug adapter is needed to change the15 pin high density (3 row) D-sub VGAconnector on the supplied cable to a 15 pin 2row connector.When using a D-Sub signal input cableconnector for Macintosh Varies according to model.DVI-D (This feature is not available in all countries.)NOTE This is a simplified representation of the rear view.This rear view represents a general model; your display may differ from the view as shown.Connect the signalinput cable and tightenit up by turning in thedirection of the arrowas shown in the figure.
14Connecting the DisplayNOTE‘ Self Image Setting Function’? This function provides the user with optimal displaysettings.When the user connects the monitor for the first time, this function automatically adjuststhe display to optimal settings for individual input signals. ‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screenflicker or tilted screen while using the device or after changing screen resolution, press theAUTO function button to improve resolution. 4. Press the power button on the front panel to turn the power on. When monitor power isturned on, the 'Self Image Setting Function' is executed automatically.(Only Analog Mode)Power Button3. Put the power cord and cables into the cable holder.(Only E2411PB)Cable Holder
15Control Panel FunctionsFront Panel ControlsMENU ButtonOSD LOCKED/UNLOCKEDThis function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushingthe MENU button for several seconds. The message"OSD UNLOCKED" should appear.SUPER ENERGYSAVING ButtonUse this button to enter SUPER ENERGY SAVINGmenu.For more information, refer to page 22.
16Control Panel FunctionsINPUT ButtonWhen two input signals are connected, you can select theinput signal (D-SUB/DVI) you want. When only one signalis connected, it is automatically detected. The defaultsetting is D-Sub. (SOURCE Hot key)Exit the OSD(On Screen Display).EXIT Button AUTO ButtonAUTO IMAGE ADJUSTMENTWhen adjusting your display settings, always pressthe AUTO button before entering the On ScreenDisplay(OSD). (Only Analog Mode)This will automatically adjust your display image tothe ideal settings for the current screen resolutionsize (display mode).The best display mode isE2211PB/E2411PB : 1920 x 1080Use this button to turn the display on or off.The power indicator stays white if the display is runningproperly (On Mode). If the display is in Sleep Mode(Energy Saving), the power indicator is blinking white. Power Button &Power Indicator
17On Screen Display (OSD) Control AdjustmentScreen AdjustmentMaking adjustments to the image size, position and operatingparameters of the display is quick and easy with the On ScreenDisplay Control system. A short example is given below to familiarize you with the use of thecontrols. The following section is an outline of the availableadjustments and selections you can make using the OSD.To make adjustments in the On Screen Display, follow these steps:Press the discretionary Button, then the main menu of the OSD appears.To access a control, use the corresponding Buttons.Use the / Buttons to adjust the image to the desired level. Use the Button to select other sub-menu items.Press the EXIT Button to exit from the OSD. 1234
18On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus.: D-SUB(Analog signal) input : DVI-D(Digital signal) inputDSUBDVI-DNOTE The order of icons may differ depending on the model (18~24).To customize the screen statusfor a user's operatingenvironmentTo adjust the contrast of thescreen To customize the color of thescreenMENU To adjust the brightness of thescreenDSUBDVI-DTo adjust the image sizeMain menu Sub-menu Supported inputDescriptionBRIGHTNESSORIGINAL RATIOCOLOR TEMP (PRESET / USER)CONTRASTLANGUAGEFACTORY RESETSUPERENERGYSAVINGTurn on the SUPER ENERGYSAVING function.DSUBDVI-DTurn off the SUPER ENERGYSAVING function.Initialize the SUPER ENERGYSAVING and set to "OFF" mode.ONOFFRESET
19On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.Sub-menusNOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.Menu NameIconsButtonTipExitAdjust (Decrease/Increase)Press the MENU Button, then the main menu of the OSD appears.Select another sub-menuRestart to select sub-menu
20On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionTo adjust the brightness of the screen. Change the input image signal ratio tooriginal. WIDEORIGINALSwitch to full screen mode according toinput image signal. * This function works only if inputresolution is lower than monitor ratio(16:9).Exit : Exit, , : Move: Select another sub-menuPRESETSelect the screen color. • WARM: Set the screen to warm color temperature . • MEDIUM: Set the screen to medium color temperature.• COOL: Set the screen to cool colortemperature.REDSet your own red color levels.GREENSet your own green color levels.BLUESet your own blue color levels.USER
21On Screen Display(OSD) Selection and Adjustment Main menu DescriptionTo choose the language in which thecontrol names are displayed.Press the , buttons to resetimmediately.Restore all factory default settings except"LANGUAGE." To adjust the contrast of the screen.Exit : Exit, , : Move: Select another sub-menu
22On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.Sub-menusNOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.Menu NameIconsButtonTipPress the SUPER ENERGY SAVING Button, then the main menu of the OSD appears.ExitMoveRestart to select sub-menu
23On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionExit : Exit, : Move: Select another sub-menuTurn on the SUPER ENERGYSAVING fuction.When current setting value isON,the SUPER SAVING color isgreen.Turn off the SUPER ENERGYSAVING function.Now the monitoris LED SAVING function.When current setting value isOFF,the SUPER SAVING color isgray.Clear the TOTAL POWERREDUCTION and TOTAL CO2REDUCTION values.OK : SelectTOTAL POWER REDUCTION : How much power is saved during using the monitor.TOTAL CO2 REDUCTION : Change the TOTAL POWER REDUCTION to CO2.ONOFFRESET
24On Screen Display(OSD) Selection and Adjustment SUPER SAVINGLED SAVING41551722 inch 24 inchSaving Data depends on the Panel. So,those values should be different fromeach panel and panel vendor.LG accumulate those values using integrated function with 10 minutesbroadcast video signal.LED Saving means that how much power can be saved using WLED Panelinstead of CCFL panel.SUPER Saving means that how much power can be more saved usingSUPER ENERGY SAVING function. NOTESAVING DATA(W/h):
25TroubleshootingNo image appearsCheck the following before calling for service.No image appearsDo you see a "OSD LOCKED" message on the screen?●Is the power cord of thedisplay connected?●Is the power indicatorlight on?●Is the power indicatorflickering?●Do you see an "OUT OFRANGE" message onthe screen?●Do you see a "CHECKSIGNAL CABLE"message on thescreen?• Check and see if the power cord is connectedproperly to the power outlet.• Press the Power button.• If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboard tobring up the screen.• Try to turn on the PC.• This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.• This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.• You can secure the current control settings,so that they cannot be inadvertently changed.You can unlock the OSD controls at any timeby pushing the MENU button for severalseconds: the message “OSD UNLOCKED” will appear.●Do you see “OSDLOCKED” when youpush MENU button?
26TroubleshootingDisplay image is incorrect●Display Position isincorrect.●On the screenbackground, verticalbars or stripes arevisible.●Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.• Press the AUTO button to automatically adjustyour display image to the ideal setting. If the results are unsatisfactory, adjust the imageposition using the H position and V position iconin the on screen display.• Press the AUTO button to automatically adjustyour display image to the ideal setting.If the results are unsatisfactory, decrease thevertical bars or stripes using the CLOCK icon inthe on screen display.• Press the AUTO button to automatically adjustyour display image to the ideal setting.If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.• Check Control Panel --> Display --> Settingsand adjust the display to the recommendedresolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits(true color).IMPORTANTCheck Control Panel --> Display --> Settings and see if the frequency or theresolution were changed. If yes, readjust the video card to the recommendresolution.If the recommended resolution (optimal resolution) is not selected, letters may beblurred and the screen may be dimmed, truncated or biased. Make sure to selectthe recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
27Display image is incorrectTroubleshooting●The screen color ismono or abnormal.●The screen blinks.• Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.• Make sure the video card is properly inserted inthe slot.• Set the color setting higher than 24 bits (true color)at Control Panel - Settings.• Check if the screen is set to interlace mode and ifyes, change it to the recommend resolution.Do you see an "Unrecognized monitor, Plug&Play (VESADDC) monitor found" message?●Have you installed thedisplay driver?• Be sure to install the display driver from the displaydriver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver fromour web site: http://www.lg.com.• Make sure to check if the video card supportsPlug&Play function.
28Specifications E2211PBTFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 54.6 cmvisible diagonal (21.5 inch)0.248 x 0.248 mm (Pixel pitch)DisplayHorizontal Freq. 30 kHz to 83 kHz (Automatic)Vertical Freq. 56 Hz to 75 Hz (Automatic)Input Form Separate Sync.DigitalSync InputSignal Input 15 pin D-Sub ConnectorDVI-D Connector (Digital)Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo InputMax VESA 1920 x 1080 @60 HzRecommend VESA 1920x 1080 @60 HzResolutionPlug&PlayOn Mode : 28W(Typ.)Sleep Mode ≤0.3 WOff Mode ≤0.3 WPowerConsumptionOperating ConditionsTemperature 10 ˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20 ˚C to 60 ˚CHumidity 5 % to 90 % non-CondensingEnvironmental ConditionsWith StandWidth 50.92 cm ( 20.04 inch) Height 35.39 cm ( 13.93 inch)(Min.)46.39 cm ( 18.26 inch)(Max.)Depth 22.44 cm ( 8.83 inch)Weight(excl. packing) 3.8 kg (8.43 lb)Dimensions& WeightTilt -4˚ to 16˚Swivel 356˚Height 110 mm / 4.33 inchRangeAC 100 - 240 V~ 50 / 60 Hz 1.0 A Power InputAttached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital),DDC2AB(Anlaog)Without StandWidth 50.92 cm ( 20.04 inch) Height 30.42 cm ( 11.97 inch) Depth 6.17 cm ( 2.43 inch)NOTEInformation in this document is subject to change without notice.
29Specifications E2411PBTFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 60.9cm visible diagonal (24inch)0.276 x 0.276 mm (Pixel pitch)DisplayHorizontal Freq. 30 kHz to 83 kHz (Automatic)Vertical Freq. 56 Hz to 75 Hz (Automatic)Input Form Separate Sync.DigitalSync InputSignal Input 15 pin D-Sub ConnectorDVI-D Connector (Digital)Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo InputMax VESA 1920 x 1080 @60 HzRecommend VESA 1920x 1080 @60 HzResolutionPlug&PlayOn Mode : 30W(Typ.)Sleep Mode ≤0.3 WOff Mode ≤0.3 WPowerConsumptionOperating ConditionsTemperature 10 ˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20 ˚C to 60 ˚CHumidity 5 % to 90 % non-CondensingEnvironmental ConditionsWith StandWidth 56.91 cm ( 22.40 inch) Height 43.26 cm ( 17.03 inch)(Min.)54.26 cm ( 21.36 inch)(Max.)Depth 27.11 cm ( 10.67 inch)Weight(excl. packing) 5.1 kg (11.33 lb)Dimensions& WeightTilt -4˚ to 17˚Swivel 356˚Height 110 mm / 4.33 inchRangeAC 100 - 240 V~ 50 / 60 Hz 1.2 A Power InputAttached ( ), Detached ( O )Stand Base Wall-outlet typePower cord DDC 2B(Digital),DDC2AB(Anlaog)Without StandWidth 56.91 cm ( 22.40 inch) Height 34.19 cm ( 13.46 inch) Depth 6.30 cm ( 2.48 inch)NOTEInformation in this document is subject to change without notice.
30SpecificationsPreset Modes (Resolution)Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)*Recommend Mode1234567891011*12720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681152 x 8641280 x 10241280 x 10241680 x 10501920 x 108031.46831.46937.50037.87946.87548.36360.02367.50063.98179.97665.29067.500706075607560757560756060E2211PB/E2411PBIndicatorOn ModeSleep ModeOff ModeWhiteWhite BlinkingOffLED ColorMODE
31Installing the Wall mount plateThis monitor satisfies the specifications of the Wall mount plate orthe interchange device.1. After moving the product to facedownward, make sure to place it on asoft cloth or a cushion to avoid surfacedamage. 2. Separate the head and the stand withthe use of a screwdriver.
32Wall mount plate(Separate purchase)This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mount plateis purchased.Kensington Security SlotConnected to a lockingcable that can bepurchased separately atmost computer stores.3.Install the Wall mount plate.<Screw Mounting Interface Dimension>Hole spacing : 100 mm x 100 mm.NOTEVESA compatible only with respect to screw mounting interface dimensions and mounting screw specificationsPlease use VESA standard as below.* 784.8 mm and under (30.9 inch) - Wall Mount Pad Thickness : 2.6 mm- Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm * 787.4 mm and above (31.0 inch) - Please use VESA standard wall mount pad and screws. Wall Mount padInstalling the Wall mount plate
Make sure to read the Safety Precautions before using the product.Keep the OWNER’S MANUAL(CD) in an accessible place for furture reference.The model and serial number of the SET is located on the back or one side of the SET. Record it below should you ever need service.MODELSERIALAs an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA).

Navigation menu