LG Electronics USA E610 Cellular/PCS GSM Phone with WLAN, Bluetooth and RFID User Manual 1

LG Electronics MobileComm USA, Inc. Cellular/PCS GSM Phone with WLAN, Bluetooth and RFID Users Manual 1

UserManual.wiki >

LG Electronics USA >

E610 User Manual >

Contents

1. Users Manual 1
2. Users Manual 2

Users Manual 1

Part 15.21 statement" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device is not intended for sale in the USA.

FCC Part 15 Class B ComplianceThis device and its accessories comply with part 15 of FCC rules and ICES-003 Class B digital apparatus requirements for Industry Canada. Operation is subject to the following two conditions:(1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation.Body-worn OperationThis device was tested for typical body-worn operations with the back of the phone kept 1.0cm (0.39 inches) between the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 1.0cm (0.39 inches) must be maintained between the user's body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components may not be used. Body-worn accessories that cannot maintain 1.0cm (0.39 inches) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.

Conformité aux normes FCC Part 15 Class BCet appareil et ses accessoires sont conformes aux normes FCC Part 15 Class B de la Federal Communications Commission et aux exigences pour appareils numériques ICES-003 Class B d’Industrie Canada.Son fonctionnement est sujet aux deux conditions suivantes :(1) Cet appareil et ses accessoires ne doivent pas provoquer de brouillage préjudiciable, et (2) cet appareil et ses accessoires doivent accepter toutes les interférences reçues, y compris celles pouvant causer un fonctionnement indésirable.Utilisation comme appareil portatifCe téléphone a été testé en vue d’une utilisation type comme appareil portatif, avec une distance de 1.0cm (0,39 pouces) entre l’arrière de l’appareil et le corps de l’utilisateur. Pour satisfaire aux exigences de la FCC en matière d’exposition aux radiofréquences, une distance d’au moins 1.0cm (0,39 pouces) doit être maintenue entre le corps de l’utilisateur et l’arrière du téléphone. Les pinces de ceinture, les étuis et autres accessoires semblables d’autres marques et contenant des composantes métalliques ne doivent pas être utilisés.Les accessoires portatifs empêchant le maintien d’une distance de 1.0 cm (0,39 pouces) entre le corps de l’utilisateur et l’arrière du téléphone et qui n’ont pas été testés en vue d’une utilisation type comme accessoires portatifs peuvent ne pas satisfaire aux limites d’exposition aux radiofréquences stipulées par la FCC et, par conséquent, ne doivent pas être utilisés.

32To turn on your phone, press and hold the Power key for 3 seconds.To turn off the phone, press and hold the Power key for 3 seconds, then touch Power off and OK.Menu key Check what options are available.Home key Return to home from any screen.Back key Return to the previous screen.Speaker/ReceiverPower/Lock keySwitch your phone on/off by pressing and holding this key.Turn off and lock the screen.Proximity sensorGetting to know your phoneNOTE: Proximity sensor When receiving and making calls, the proximity sensor automatically turns the backlight off and locks the touch keypad by sensing when the phone is near your ear. This extends battery life and prevents the touch keypad from activating unintentionally during calls.

34 WARNINGPlacing a heavy object on the phone or sitting on it can damage its LCD and touch screen functions. Do not cover the protective ﬁlm on the LCD’s proximity sensor. This may cause the sensor to malfunction.Getting to know your phoneVolume keysOn the home screen: control ringer volume. During a call: control your In-Call volume.When playing a track: control volume continuously.•••Stereo earphone connectorPower/Lock key

35Installing the SIM card and batteryTo remove the back cover, hold the phone in your hand firmly. With the other hand, firmly press your thumb on the back cover. Now lift off the back cover.1 Slide the SIM card into the SIM card slot. Make sure the gold contact area on the card is facing downwards.2

Navigation menu