LG Electronics USA EAX6069 60 GHz WIRELESS HIGH DEFINITION (HD) SINK User Manual SAC33601902 Edit1 en
LG Electronics USA 60 GHz WIRELESS HIGH DEFINITION (HD) SINK SAC33601902 Edit1 en
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
LCD TV OWNER’S MANUAL 47LH85 55LH85 55LH95 Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. Model: Serial: This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting and this is the setting in which power savings will be achieved. 1-800-243-0000 USA, Consumer User 1-888-865-3026 1-888-542-2623 USA, Commercial User CANADA LG Customer Information Center Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to quality for Energy Star rating. Media Box is not qualified for ENERGY STAR. P/NO : SAC33601902 (0902-REV01) www.lgusa.com / www.lg.ca WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device). Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lighting storms or when unused for long periods of time. 10 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. SAFETY INSTRUCTIONS 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. 14 CAUTION concerning the Power Cord: It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. 15 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). 17 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Short-circuit Breaker Power Supply 18 DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable. 19 As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. 20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Ground Clamp 23 Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places. 24 If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center. 25 Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it. 26 Keep the product away from direct sunlight. 27 Antenna Lead in Wire Antenna Discharge Unit (NEC Section 810-20) Electric Service Equipment Grounding Conductor (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) NEC: National Electrical Code 21 22 Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. 28 For LCD TV If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. FCC Radiation Exposure In order to meet FCC RF Exposure requirements, this device must be installed in such a way that a distance of 20cm is always maintained between the device antenna and nearby persons. ON DISPOSAL (Only Hg lamp used LCD TV) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Media Box installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Attaching the TV to a Desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Kensington Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Securing the TV to the wall to prevent falling when the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Channel Setup - Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 - Add / Delete Channel (Manual Tuning) . . . . . . 51 - Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Favorite Channel Setup / Favorite Channel List . . 54 Brief Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Simple Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 USB Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Divx Registration Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Audio out Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 WATCHING TV / CHANNEL CONTROL Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Initial Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 PICTURE CONTROL Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 76 Picture Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Preset Picture Settings (Picture Mode) . . . . . . . . . . . . . 80 Manual Picture Adjustment - User Mode . . . . . . . . . . 81 Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . 82 Expert Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Energy Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Local Dimming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Local Dimming Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 92 Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 94 Sound Setting Adjustment - User Mode . . . . . . . . . . . 95 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 On-Screen Menus Language Selection . . . . . . . . . . . . 101 Caption Mode - Analog Broadcasting System Captions . . . . . 102 - Digital Broadcasting System Captions . . . . . . 103 - Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 IR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 External Control Through RS-232C . . . . . . . . . . . . . . . . .126 Open Source License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132 TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 PARENTAL CONTROL / RATINGS Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 FEATURE OF THIS TV High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. This TV contains the detailed calibrations necessary for professional certification by the Imaging Science Foundation. The resulting ISF “day” and “night” modes will then be accessible by the user to experience the best their LG HDTV has to offer. CALIBRATE LIKE A PRO: Sophisticated and detailed calibrations can be made through the ISFccc mode. Detailed calibration requires a licensed technician. Please contact your local dealer to inquire about an ISF certified technician. The AV Mode optimizes the picture into Cinema, Sports, and game Mode according to the video and audio content. The viewer has the ability to quickly choose the correct mode for the picture they are viewing. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Automatically enhances and amplifies the sound of human voice frequency range to help keep dialogue audible when background noise swells. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing." Displays HDTV programs in full 1920 x 1080p resolution for a more detailed picture. LG TV include a unique invisible speaker system, tuned by renowned audio expert, Mr. Mark Levinson. Speakers are embedded in strategic spots behind the front cabinet and use minute vibrations to turn the entire front bezel into the speaker system. The result is a clean, polished look, and enhanced audio by increasing the “sweet spot”, giving a wider and richer sound field. IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TV SCREEN ■ ■ ■ When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty. In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Image burn can also occur on the letterboxed areas of your TV if you use the 4:3 aspect ratio setting for an extended period. PREPARATION ACCESSORIES PO ER EN ER GY SAVIN LI VO MEN IN CD Manual TE MA FA RK CH EN FO RE Owner’s Manual TE PU FL BA ASH CK Q.M EN IN ST MU MOAV DE TU RN PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 1.5V 1.5V Remote Control, Batteries Power Cord (For 47LH85) x4 Bolts for stand assembly (Refer to P.15) Protection Cover Not included with all models Option Extras * Wipe spots on the exterior only with the polishing cloth. Polishing Cloth * Do not wipe roughly when removing stain. Excessive pressure may cause scratch or discoloration. D-sub 15 pin Cable When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance. PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your product. LCD TV PREPARATION RF Receiver (Model: EAX6069R) CH CHANNEL (D,E) Buttons VOL VOLUME (+, -) Buttons ENTER ENTER Button MENU SPEAKER MENU Button INPUT INPUT Button Remote Control Sensor, Intelligent Sensor Adjusts picture according to the surrounding conditions POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. (Can be adjusted P o w e r I n d i c a t o r in the OPTION menu. G p . ?) OFF ON AC power control switch MEDIA BOX POWER touch button Input Source Indicator & INPUT touch button Select the input source by touching a letter. TV AV1 AV2 Wireless Connection Indicator COM1 USB IN RF transmitter (Model: EAX5296T) FCC ID: BEJEAX5296 IC: 2703L-EAX5296 10 USB INPUT Used for viewing photos and listening to MP3s. COM2 RGB 4 WIRELESS POWER IN 4 HDMI IN 4 Digital Connection. Supports HD video and Digital audio. BACK PANEL INFORMATION ■ Image shown may differ from your product. LCD TV USB SERVICE ONLY IN 5 MEDIA BOX OFF AC IN /DVI IN PB PR VIDEO L/MONO AUDIO R AUDIO VIDEO AUDIO IN RS-232C IN (SERVICE ONLY) SERVICE ONLY AV IN COMPONENT IN ON PREPARATION HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). USB IN SERVICE ONLY, SERVICE ONLY RS-232C IN SERVICE ONLY Used for software updates. COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red and white for audio. AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). ANTENNA/CABLE IN Connect over-the air/Cable signals to this jack. OPTICAL DIGITAL AUDIO OUT (RGB/DVI) RGB IN (PC) ANTENNA/ CABLE IN OUT OPTICAL DIGITAL AUDIO OUT Digital optical audio output for use with amps and home theater systems. Note: In standby mode, this port doesn’t work. HDMI OUT Wired connection between TV and Media Box. RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable). AUDIO IN (RGB/DVI) 1/8" (0.32 cm) headphone jack for analog PC audio input. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 11 PREPARATION WIRELESS OPERATION The Media Box transmits the 1080p HD video signal using 60 GHz freuency wirelessly. PREPARATION LRP (1-40 Mbps) TV AV1 AV2 COM1 USB IN COM2 RGB 4 WIRELESS POWER IN 4 HRP (3-4 Gbps) Media Box features G Uncompressed 1080p HD video signal transmission from Media Box to TV in LOS 10 m. G Beam direction due to 60 GHz frequency feature. G Smart antenna technology: Beam direction can be change by obstacle. ! NOTE To avoid wireless disconnection (due to interference), do not leave the TV and Media Box within LOS 10 m. Beam direction can be change by TV and Media Box location. If there is a obstacle in beam direction, wireless signal may be weak and the video quality is poor. Wireless Beamforming Beam direction can be change by Media Box location. Wireless Beamsteering ■ Beam direction can be change by obstacle. Side view Obstacle Wall and ceiling made by concrete and metal. 12 MEDIA BOX INSTALLATION PREPARATION 13 PREPARATION STAND INSTRUCTION ■ Image shown may differ from your TV. PREPARATION INSTALLATION (For 47LH85) Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV. ! NOTE 14 When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Loose the bolts from TV. Detach the stand from TV. PREPARATION DETACHMENT PROTECTION COVER Insert the P R O T E C T I O N C O V E R into the TV. After removing the protection paper from the protection cover, adhere it to the TV as shown. 15 PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer. VESA (A * B) Model 200 * 200 47LH85 Standard Screw M6 Quantity Wall Mounting Bracket (sold separately) AW-47LG30M 55LH85, 55LH95 400 * 400 M6 AW-55LH40M ! NOTE Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount. Standard dimensions for wall mount kits are shown in the table. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer then the standard dimension, as they may cause damage to the inside to the TV. For wall mounts that do not comply with the VESA CAUTION 16 standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents. LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions. Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock. CABLE MANAGEMENT ■ Image shown may differ from your TV. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT CLIP as shown. PREPARATION CABLE MANAGEMENT CLIP Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed. 17 PREPARATION DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. PREPARATION 4 inches 4 inches 4 inches 4 inches CAUTION Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact h t t p : / / w w w . k e n s i n g t o n . c o m, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors. NOTE: The Kensington Security System is an optional accessory. 18 SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■ PREPARATION ■ Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. * If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. ■ Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. ! NOTE Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same. 19 PREPARATION ■ ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION PREPARATION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Wall Antenna Socket Outdoor Antenna (VHF, UHF) Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTENNA/ CABLE IN RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the copper wire when connecting the antenna. 2. Cable ANTENNA/ CABLE IN Cable TV Wall Jack RF Coaxial Wire (75 ohm) To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter. ■ If the antenna is not installed properly, contact your dealer for assistance. ■ ■ 20 EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD RECEIVER SETUP This Media Box can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. 1. How to connect PB PR Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O 1 jacks on the Media Box. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the C O M P O N E N T A U D I O 1 jacks on the Media Box. ■ Supported Resolutions /DVI IN ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box operation.) Select the C o m p o n e n t 1 input source on the Media Box using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the Media Box. COMPONENT IN 2. How to use ■ EXTERNAL EQUIPMENT SETUP Component Connection PB PR VIDEO L/MONO AUDIO VIDEO RGB IN (PC) Y, CB/PB, CR/PR Signal Component HDMI 480i Yes No 480p Yes Yes 720p Yes Yes 1080i Yes Yes 1080p Yes Yes Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480i 15.73 15.73 59.94 60.00 720x480p 31.47 31.50 59.94 60.00 1280x720p 44.96 45.00 59.94 60.00 1920x1080i 33.72 33.75 59.94 60.00 1920x1080p 26.97 27.00 33.71 33.75 67.432 67.50 23.94 24.00 29.97 30.00 59.939 60.00 21 WATCHING TV / CHANNEL CONTROL HDMI Connection 1. How to connect Connect the digital set-top box to H D M I / D V I I N 1 , 2 , 3 , or 4 jack on the Media Box. No separate audio connection is necessary. HDMI supports both audio and video. HDMI OUTPUT 2. How to use Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1, H D M I2, H D M I3, or H D M I 4 input source on the Media Box using the INPUT button on the remote control. COMPONENT IN ■ /DVI IN WATCHING TV / CHANNEL CONTROL 22 PB PR VIDEO L/ AUDIO VIDEO RGB IN (PC HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480p 31.47 31.50 59.94 60.00 1280x720p 44.96 45.00 59.94 60.00 1920x1080i 33.72 33.75 59.94 60.00 1920x1080p 26.97 27.00 33.71 33.75 67.432 67.50 23.94 24.00 29.97 30.00 59.939 60.00 DVI to HDMI Connection 1. How to connect Connect the digital set-top box audio output to the A U D I O I N ( R G B / D V I) jack on the Media Box. AUDIO DVI OUTPUT 2. How to use ■ COMPONENT IN PB PR VIDEO L/MONO AUDIO R AV IN Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1, H D M I2, H D M I 3, or H D M I 4 input source on the Media Box using the INPUT button on the remote control. AUDIO VIDEO AUDIO IN /DVI IN RGB IN (PC) (RGB/DVI) WATCHING TV / CHANNEL CONTROL Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 , 3 , or 4 jack on the Media Box. 23 EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the Media Box. PB PR 2. How to use Turn on the DVD player, insert a DVD. Select the C o m p o n e n t1 input source on the Media Box using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the Media Box. Refer to the DVD player's manual for operating instructions. ■ ■ ■ /DVI IN RS 232C IN ■ COMPONENT IN EXTERNAL EQUIPMENT SETUP Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the Media Box. Match the jack colors (Y = green, PB = blue, and PR = red). PB PR VIDEO AUDIO VIDEO Composite (RCA) Connection RGB IN (P AUDIO VIDEO 1. How to connect V I D E O jacks between Media Connect the A U D I O/V Box and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use ■ PB PR VIDEO L/MONO AUDIO R AUDIO VIDEO AUDIO IN /DVI IN 24 AV IN ■ Turn on the DVD player, insert a DVD. Select the A V 1 or A V 2 input source on the Media Box using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions. COMPONENT IN ■ RGB IN (PC) (RGB/DVI) HDMI Connection 1. How to connect No separate audio connection is necessary. HDMI supports both audio and video. HDMI OUTPUT ■ /DVI IN ■ Select the HDMI1, H D M I2, HDMI3, or HDMI4 input source on the Media Box using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions. COMPONENT IN 2. How to use PB PR VIDEO L/MO AUDIO VIDEO EXTERNAL EQUIPMENT SETUP Connect the HDMI output of the DVD to the H D M I / D V I I N 1, 2 , 3 or 4 jack on the Media Box. RGB IN (PC) ! NOTE Check HDMI cable over version 1.3. If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. 25 EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection 1. How to connect EXTERNAL EQUIPMENT SETUP Connect the RF antenna out socket of the VCR to the A N T E N N A / C A B L E I N socket on the Media Box. Connect the antenna cable to the RF antenna in socket of the VCR. ANT OUT ANTENNA/ CABLE IN OPTICAL DIGITAL AUDIO OUT S-VIDEO VIDEO AUDIO ANT IN OUTPUT SWITCH Wall Jack 2. How to use ■ ■ Set VCR output switch to 3 or 4 and then tune Media Box to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Antenna Composite (RCA) Connection 1. How to connect V I D E O jacks between Media Connect the A U D I O/V Box and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) ANT OUT OUTPUT SWITCH ANT IN S-VIDEO AUDIO VIDEO 2. How to use Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ■ Select the A V 1 input source on the Media Box using the I N P U T button on the remote control. ■ If connected to A V I N 2, select A V 2 input source on the Media Box. ■ PB PR VIDEO L/MONO AUDIO R AV IN COMPONENT IN AUDIO VIDEO AUDIO IN /DVI IN 26 RGB IN (PC) (RGB/DVI) LCD TV AND MEDIA BOX WIRED SETUP 1. How to connect Connect the H D M I I N 5 of the TV to the H D M I O U T jacks on the Media Box. IN 5 SERVIC No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use ■ USB SERVICE ONLY L/MONO AUDIO R AV IN Select the C o m p o n e n t 1 input source on the Media Box using the I N P U T button on the remote control. AUDIO IN IN (PC) (RGB/DVI) OPTICAL DIGITAL AUDIO OUT AN CA EXTERNAL EQUIPMENT SETUP OUT 27 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set 1. How to connect V I D E O jacks Connect the A U D I O/V between Media Box and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) VIDEO ■ ■ Select the A V 2 input source on the Media Box using the I N P U T button on the remote control. If connected to A V I N 1 input, select the A V 1 input source on the Media Box. Operate the corresponding external equipment. PB PR VIDEO L/MONO AUDIO R AV IN ■ 2. How to use COMPONENT IN EXTERNAL EQUIPMENT SETUP AUDIO VIDEO AUDIO IN /DVI IN (RGB/DVI) RGB IN (PC) OUT USB CONNECTION 1. How to connect COM1 COM2 AV1 AV2 IN 4 USB IN Connect the USB device to the U S B I N jack on the Media Box. or 2. How to use After connecting the U S B I N jack, you use the USB function. Memory Key ■ (G p .?) 28 AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Connect the other end of the optical cable to the digital audio input on the audio equipment. Set the “TV Speaker option - Off ” in the AUDIO menu. (G p .?). See the external audio equipment instruction manual for operation. AV IN O AUDIO R Connect one end of the optical cable to the Media Box port of O P T I C A L D I G ITAL AUDIO OUT. AUDIO IN (RGB/DVI) OPTICAL DIGITAL AUDIO OUT OUT ANTE CAB EXTERNAL EQUIPMENT SETUP 1. How to connect ! NOTE When connecting with external audio equipment, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (G p . ?) CAUTION Do not look into the optical output port. Looking at the laser beam may damage your vision. Audio with ACP (Audio Copy Protection) function may block digital audio output. 29 EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection RGB OUTPUT AUDIO 1. How to connect Connect the VGA output of the PC to the R G B I N ( P C) jack on the Media Box. Connect the PC audio output to the A U D I O I N ( R G B / D V I) jack on the Media Box. 2. How to use ■ ■ Turn on the PC and the Media Box. Select the R G B - P C input source on the Media Box using the I N P U T button on the remote control. PR VIDEO L/MONO AUDIO R AV IN EXTERNAL EQUIPMENT SETUP AUDIO AUDIO IN DVI to HDMI Connection (RGB/DVI) RGB IN (PC) OUT 1. How to connect Connect the DVI output of the PC to the H D M I / D V I I N 1, 2 , or 3 jack on the Media Box. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the Media Box. DVI OUTPUT AUDIO 2. How to use ■ PB PR VIDEO L/MONO AUDIO R AV IN COMPONENT IN ■ Turn on the PC and the Media Box. Select the HDMI1, H D M I2, or HDMI3 input source on the Media Box using the I N P U T button on the remote control. AUDIO VIDEO AUDIO IN 30 Check HDMI cable over version 1.3. If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. /DVI IN ! NOTE RGB IN (PC) (RGB/DVI) ! NOTES To get the the best picture quality, adjust the PC graphics card to 1920x1080. The synchronization input form for Horizontal and Vertical frequencies is separate. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. If there are overscan in HDMI-PC 1920x1080, change aspect ratio to J u s t s c a n. When selecting HDMI-PC, set the “Input Label PC” in the OPTION menu. The TV provides EDID data to the PC system with a DDC protocol. DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. EXTERNAL EQUIPMENT SETUP Supported Display Specifications (RGB-PC, HDMI-PC) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 70.09 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.776 59.87 1360x768 47.712 60.015 1280x1024 63.981 60.02 1600x1200 75.00 60.00 66.587 59.934 67.5 60.00 1920x1080 RGB-PC 1920x1080 HDMI-PC 31 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. EXTERNAL EQUIPMENT SETUP PICTURE Move SCREEN Enter • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint Resolution Auto Config. Position • Advanced Control Size • Picture Reset Screen (RGB-PC) Phase Reset MENU Select P I C T U R E. ENTER Select S c r e e n ( R G B - P C ). ENTER Select R e s o l u t i o n. ENTER ENTER 32 Move Select the desired resolution. 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Prev. Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move SCREEN Enter • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint Move Prev. Resolution Auto Config. Position • Advanced Control • Picture Reset Size To Set Yes No Phase Screen (RGB-PC) Reset MENU Select P I C T U R E. ENTER Select S c r e e n ( R G B - P C ). ■ ■ ENTER Select A u t o C o n f i g .. ENTER Select Y e s. ENTER EXTERNAL EQUIPMENT SETUP PICTURE If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the P o s i t i o n , S i z e or P h a s e. Start Auto Configuration. 33 EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase PICTURE Move SCREEN Enter Move Prev. EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint Resolution Auto Config. Position • Advanced Control • Picture Reset Screen (RGB-PC) Size Phase Reset MENU ■ ENTER Select S c r e e n ( R G B - P C ). ■ ENTER Select P o s i t i o n, S i z e, or P h a s e. ■ ENTER ENTER 34 Select P I C T U R E. Make appropriate adjustments. P o s i t i o n: This function is to adjust picture to left/right and up/down as you prefer. S i z e: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. P h a s e : This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. Move SCREEN Enter Move Prev. • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint Resolution Auto config. Position • Advanced Control • Picture Reset Screen (RGB-PC) To Set Size Yes No EXTERNAL EQUIPMENT SETUP PICTURE Phase Reset MENU Select P I C T U R E. ENTER Select S c r e e n ( R G B - P C ). ENTER Select R e s e t. ENTER Select Y e s. ENTER 35 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns the TV on from standby or off to standby. POWER AV MODE ENERGY SAVING Adjusts the Energy Saving. G p.86 INPUT WATCHING TV / CHANNEL CONTROL ENERGY SAVING AV MODE Toggles through preset Video and Audio modes. G p.58 INPUT Rotates through inputs. Also switches the TV on from standby. G p.56 VOLUME UP Adjusts the volume. /DOWN LIST FLASH BACK MUTE Switches the sound on or off. G p.45 MENU Displays the main menu or clears all on-screen displays and return to TV viewing. VOL MUTE MARK FAV CH Q.MENU Opens the list of Quick Menu options. G p.49 THUMBSTICK Navigates the on-screen menus and adjusts the system (Up/Down/Left Right/ENTER) settings to your preference. MENU INFO Displays channel information and wireless signal strength at the top of the screen. G p.55 Q.MENU ENTER RETURN Allows the user to move return one step in an interactive application or other user interaction function. INFO 36 RETURN NUMBER button — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tunes to the last channel viewed. CHANNEL Changes the channel. UP/DOWN PAGE Moves from one full set of screen information to the next one. UP/DOWN FAV Scroll through the programmed Favorite channels. G p.54 MARK Select the input to apply the Picture Wizard settings. G p.79 Use to mark or unmark a photo/music. G p.64, 6 8, 7 2 USB, SIMPLINK Control buttons Controls USB menu (Photo List and Music List.) Controls the SIMPLINK compatible devices. WATCHING TV / CHANNEL CONTROL LIST Displays the channel table. G p.53 SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. G p.60-61 Installing Batteries ■ Open the battery compartment cover on the back side and install the batteries matching correct polarity. ■ Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones. ■ Close cover. 37 WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly and switch the A C p o w e r c o n t r o l s w i t c h on TV. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, CH ( or ) button on the TV or press the POWER, INPUT, CH ( or ), Number (0~9 9 ) button on the remote control. WATCHING TV / CHANNEL CONTROL Select the viewing source by using the INPUT button on the remote control. ■ This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. ! NOTE If you intend to be away on vacation, disconnect the power plug from the wall power outlet. If you do not complete the I n i t i a l s e t t i n g, it will appear whenever the TV is switched on until the I n i t i a l s e t t i n g procedure is completed. If the TV is unplugged once or turn off with the AC power control switch on the TV, reset the C l o c k function. ■ When pressing TV On Standby ■ button on the TV or POWER the remote control. Media Box On Sleep Standby On Sleep Standby TV Standby On Media Box Sleep Sleep Standby On On Standby When pressing POWER button on the Media Box. You cannot turn on the TV using POWER button on the Media Box. TV On Standby Media Box TV Media Box On Sleep Standby On Sleep Standby Standby On On Sleep On On Sleep On On Standby * Standby: The status that wireless connection is impossible between TV and Media Box. * Sleep: The status that wireless connection is possible between TV and Media Box. 38 CHANNEL SELECTION Press the C H ( or ) or NUMBER buttons to select a channel number. Adjust the volume to suit your personal preference. Press the V O L ( + or - ) button to adjust the volume. If you want to switch the sound off, press the M U T E button. You can cancel the Mute function by pressing the MUTE or V O L ( + or - ) button. WATCHING TV / CHANNEL CONTROL VOLUME ADJUSTMENT 39 WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. H o m e U s e”. We recommend setting the TV to “H H o m e U s e” mode for the best picDefault selection is “H ture in your home environment. ■ “S S t o r e D e m o” Mode is only intended for use in retail environments. Customers can adjust the “P Picture menu - P i c t u r e m o d e” manually while inspecting the TV, but the TV will automatically return to preset instore mode after 5 minutes. ■ “S S t o r e D e m o” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes the TV to set the image quality. ■ You can also adjust I n i t i a l S e t t i n g in the O P T I O N menu. ■ WATCHING TV / CHANNEL CONTROL Step1. Selecting Language Step3. Time setting Language Time Setting English Current Time Setting Español Month Français Previous Next Date 21 Year 2009 Hour 10 AM 10 Time Zone Select Menu Language. Eastern Daylight Saving Auto Previous 02 Minute ENTER Auto Next Select A u t o or M a n u a l. Step2. Mode setting Mode Setting ENTER Selecting the environment. Choose the setting mode you want. Store Demo Home Use Select [Home Use] to use this TV at home. To use this TV at Store, select [Store Demo]. Previous Step4. Auto Tuning Auto Tuning Next Before starting, be sure that the TV antenna is connected. ENTER Select H o m e U s e. Previous 40 Select desired time option. ENTER INFO i Simple Manual Next Check your antenna connection and start A u t o T u n i n g. ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. CHANNEL Move PICTURE Enter Move Auto Tuning Aspect Ratio Manual Tuning Picture Wizard AUDIO Enter : 16:9 Move Auto Volume Clear Voice II Energy Saving : Off Channel Edit Picture Mode : On : On • Level : Standard Balance Menu Language : English Audio Language : English 70 90 • SRS TruSurround XT: Off • Brightness 50 • Treble 50 • Sharpness 70 • Bass 50 : Standard TIME : On : Off Move Enter Clock CHANNEL Key Lock Enter Input Label SIMPLINK PICTURE AUDIO TIME Off Time : Off On Time : Off Sleep Timer : Off Simple Manual Caption : Off Set ID OPTION :1 LOCK INPUT USB LOCK Move Lock System : Off INPUT Enter Lock System : Off Move Enter USB TV Photo List Set Password Set Password AV1 Music List Block Channel Block Channel AV2 Movie List Movie Rating TV Rating-English Component1 DivX Reg.Code TV Rating-Children TV Rating-French Component2 Deactivation TV Rating-General Downloadable Rating RGB-PC Downloadable Rating Input Block HDMI1 Input Block Move Enter WATCHING TV / CHANNEL CONTROL Move • Contrast OPTION • Backlight Sound Mode Enter HDMI2 For USA For Canada MENU Display each menu. ENTER Select a menu item. ENTER Accept the current selection. MENU Return to TV viewing. 41 WATCHING TV / CHANNEL CONTROL When connecting HDMI5 HDMI1 WATCHING TV / CHANNEL CONTROL 42 HDMI2 HDMI3 PICTURE PICTURE Move HDMI4 AUDIO AUDIO Enter Aspect Ratio : 16:9 Auto Volume Picture Mode : Standard Clear Voice II • Backlight 100 • Contrast 70 Balance • Brightness 40 Sound Mode • Sharpness 40 • Color 70 • Tint HDMI5 Move Enter : On : On • Level : Standard • SRS TruSurround XT: Off • Treble 50 • Bass 50 ! NOTE This product not only provides composite, component and HDMI1-4 that can be used as the input terminal to the Media Box but also provides HDMI5 that can be directly connected to the TV for limited usage. Use of menu other than picture/audio is limited while viewing through HDMI5. QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio 16:9 A s p e c t R a t i o: Selects your desired picture format. P i c t u r e M o d e: Selects the factory preset picture depend on the viewing environment. S o u n d M o d e: Selects the factory preset sound for type of program. M u l t i A u d i o: Changes the audio language (Digital signal). S A P: Selects MTS sound (Analog signal). S l e e p T i m e r: Select the amount of time before your TV turns off automatically. D e l / A d d / F a v: Select channel you want to add/delete or add the channel to the Favorite List. C a p t i o n: Select on or off. U S B D e v i c e: Select “Eject” in order to eject a USB device. WATCHING TV / CHANNEL CONTROL Q.MENU Display each menu. Make appropriate adjustments. Q.MENU Return to TV viewing. 43 WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. CHANNEL Move Enter Move WATCHING TV / CHANNEL CONTROL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Enter Check your antenna connection. The previous channel information will be updated during Auto Tuning. Yes No MENU Select C H A N N E L. ENTER Select A u t o T u n i n g. ENTER Select Y e s. ENTER Run A u t o t u n i n g. RETURN MENU 44 CHANNEL Auto Tuning Return to the previous menu. Return to TV viewing. ■ The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search. Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Enter DTV Select channel type and RF-channel number. Channel DTV 2-1 Bad Normal Good Delete Close MENU Select C H A N N E L. ENTER Select M a n u a l T u n i n g. ENTER ■ The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search. WATCHING TV / CHANNEL CONTROL Auto Tuning Select D T V, T V, C A D T V, or C A T V. Select channel you want to add or delete. ENTER Select A d d or D e l e t e. RETURN MENU Return to the previous menu. Return to TV viewing. 45 WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using C H button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the C h a n n e l E d i t menu. WATCHING TV / CHANNEL CONTROL CHANNEL Move Enter Auto Tuning Manual Tuning Channel Edit Ch. Change CH Page Change Previous Add/Delete MENU Select C H A N N E L. ENTER Select C h a n n e l E d i t. ENTER Select a channel. Add or delete a channel. RETURN MENU 46 Navigation Return to the previous menu. Return to TV viewing. CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. Channel List This padlock is displayed when the channel is locked with parental control. DTV 2-1 DTV 3-1 DTV 4-1 Displaying Channel List Display the C h a n n e l L i s t. LIST Selecting a channel in the channel list WATCHING TV / CHANNEL CONTROL Exit Select a channel. Switch to the chosen channel number. ENTER Paging through a channel list CH RETURN Turn the pages. Return to TV viewing. 47 WATCHING TV / CHANNEL CONTROL FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. To tune to a favorite channel, press the F A V (Favorite) button repeatedly. Del/Add/Fav CH or Select your desired channel. WATCHING TV / CHANNEL CONTROL Q.MENU Select D e l / A d d / F a v. Favorite Select F a v o r i t e. Q.MENU Return to TV viewing. FAVORITE CHANNEL LIST Displaying the favorite channel list Favorite List DTV 2-1 DTV 3-1 DTV 4-1 Display the Favorite channel list. MARK FAV Selecting a channel in the favorite channel list Exit Select a channel. Switch to the chosen channel number. ENTER Paging through a favorite channel list CH RETURN 48 Turn the pages. Return to TV viewing. BRIEF INFORMATION Brief Info shows the present screen information. Show the Brief Info on the screen. INFO RETURN Return to TV viewing. Brief Info Title Test.. DOLBY DIGITAL CNN Sat, Feb 21, 2009 Multilingual 10:40 AM 10:10 AM CC Caption 11:40 AM 1080i TV-PG D L S V Wireless Signal CC 4:3 16:9 480i 480p 720p 1080i 1080p Multilingual : The program contains two or more audio services. Use the Q . M E N U menu to select wanted Audio. Program title Day, Month, Year Caption : The program contains one or more caption services. Use the Q . M E N U menu to select wanted Closed caption. Program start time Program progress bar The original aspect ratio of the video is 4:3 The original aspect ratio of the video is 16:9 (wide) Program finish time Present time Banner information The video resolution is 720x480i The video resolution is 720x480p The video resolution is 1280x720p The video resolution is 1920x1080i The video resolution is 1920x1080p WATCHING TV / CHANNEL CONTROL V - C h i p: The program contains V-Chip information. Refer to the LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex), V (Violence), FV (Fantasy Violence) 49 WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Select the desired input source. ■ You can also select the desired input source in the I N P U T menu. ENTER INPUT TV WATCHING TV / CHANNEL CONTROL HDMI4 AV2 HDMI3 Component1 HDMI2 ie) HDMI1 Component2 RGB-PC Disconnected inputs are inactive (grayed out) TV AV1 AV2 Component1 Component2 Input Label Exit Select a desired input source (except T V). Then, you can select your desired I n p u t L a b e l with using Blue button. G p . 5 5 ie) In case of changing the input label using Blue button VCR TV ■ ■ ■ ■ 50 AV1 AV1 Game AV2 DVD Component1 Set Top Box Component2 When new external device is connected, this popup menu is displayed automatically. If selecting Y e s, you can select input source that you want to appreciate. S I M P L I N K - O n”, popup menu for HDMI But, when selecting “S input will not be displayed. T V: Select it to watch over-the-air, cable and digital cable broadcasts. A V: Select them to watch a VCR or other external equipment. ■ ■ ■ New external input is connected. Do you want to use this? AV2 Yes No C o m p o n e n t: Select them to watch DVD or a Digital set-top box. R G B - P C: Select it to view PC input. H D M I: Select them to watch high definition devices.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2009:04:02 11:06:20-07:00 Create Date : 2009:04:02 11:06:09-07:00 Title : SAC33601902-Edit1-en Author : sun Creator : 3.3: LaserWriter 8 Z1-8.7.1 Producer : Acrobat Distiller 4.0 for Macintosh Page Count : 50 Mod Date : 2009:04:02 11:06:20-07:00 Creation Date : 2009:04:02 11:06:09-07:00 Metadata Date : 2009:04:02 11:06:20-07:00EXIF Metadata provided by EXIF.tools