LG Electronics USA EBR844226 BT AUX Module User Manual H User s Manual

LG Electronics USA BT AUX Module H User s Manual

User Manual

Order Number : GETEC-C1-17-146 FCC Part 15 subpart C Test Report Number : GETEC-E3-17-009 Page 1 / 1 EUT Type: BT AUX Module FCC ID.: BEJEBR844226 APPENDIX H : USER’S MANUAL
BT AUX Module User GuideThis product is installed and used in refrigerator using 2.4GHz Bluetooth technology.It is a Bluetooth module that can be connected to another Bluetooth device and outputthe sound of that device.CN103CN101 CN102
CON101Pin Num Pin name Pin Discription1 EXT_5V Receives 5V operation voltage from outside2BT_STATE_LEDShows Bluetooth connection status.1) Pairing Standby LED 250 ms ON, 250 ms OFF2) Connection status LED ON3) disconnection status LED OFF3 BT_STATE Maintain High (3.3V) when playing music4 GND GroundCON102Pin Num Pin name Pin Discription1 OUT_L Audio Left output2 A_GND Audio Ground3 OUT_R Audio Right outputCON103Pin Num Pin name Pin Discription1PLAY/PausePlay / Pause toggle when inputting High (3.3V) for 1 second or more from the outside2REWRewind when receiving 500ms square wave (3.3V) input from outside when playing musi3FFForward operation when receiving 500ms square wave (3.3V)input from outside when playing music1. Description of operatio2. Certification and safety approvalsRF standardThe radio equipment may not be able to provide services related to personal safety due to possible radio interferenceFrequency 2402MHz~2480MHzPropagation F1D,G1DCommunication Repeatable typeEnvironment -30 ~50 Power source DC 5V
Product nameSmall-power wireless devicesWireless devices for wireless data communication systemsBT AUX ModuleTrade Name or Applicant LG ElectronicsManufacturer / Country of Manufacture LG Electronics / KoreaCertification Number BEJEBR844226Indication of device certification3. Product Specifications and CharacteristicsProduct name BT AUX ModuleProduct Size 30mm X 45mmPower DC 5VWireless range 10m 이내Supported Bluetooth profilesA2DPAVRCPBluetooth Specification Ver4.1
•7. Notice•WARNING•This device is not available for laptop or similar portable system.•7.1 FCC (Certification)•This device complies with part 15 of the FCC rules.•Operation is subject to the following two conditions:•(1) This device may not cause harmful interference, and•(2) This device must accept any interference received,•including interference that may cause undesired operation•FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are•expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.•U.S. Regulatory Wireless Notice•This products emits radio frequency energy, but the radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized.•FCC Radiation Exposure Statement•This equipment compiles with FCC radiation exposure limits set forth an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.•Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.•End Product Labeling•The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is•not visible when the module is installed inside another device, then the outside of the•device into which the module is installed must also display a label referring to the enclosed•module. This exterior label can use wording such as the following: “Contains Transmitter•Module FCC ID: BEJEBR844226” or “Contains FCC ID: BEJEBR844226”. Any similar wording•that expresses the same meaning may be used. The Grantee may either provide such a label,•an example of which must be included in the application for equipment authorization, or,•must provide adequate instructions along with the module which explain this requirement.•In the latter case, a copy of these instructions must be included in the application for•equipment authorization.
•7.2 IC (Certification)•This device complies with RSS-247 of the Industry Canada Rules.•Operation is subject to the following two conditions:•1) this device may not cause interference and•2) this device must accept any interference, including interference•that may cause undesired operation of the device•IC Warning•This device complies with Industry Canada license-exempt RSS standard(s).•Operation is subject to the following two conditions:•(1) this device may not cause interference, and•(2) this device must accept any interference, including interference that may cause undesired operation of the device.•Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes :•(1) l'appareil ne doit pas produire de brouillage, et•(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,•même si le brouillage est susceptible d'en compromettre le fonctionnement.•IC Radiation Exposure Statement:•This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.•NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu