LG Electronics USA G4010 GSM Dual Band Mobile Phone User Manual

LG Electronics USA GSM Dual Band Mobile Phone

User Manual

G4010

User Guide

Unpacking 8

For Your Safety 9

Your Phone 14

Phone Components 14

Your Phone's Features 15

Display Information 17

Getting Started 18

Using the Battery, Charger

and SIM Card 18

Installing the Battery 18

Removing the Battery 19

Charging the Battery 19

Disconnecting the Charger 20

Installing the SIM Card 21

Turning Your Phone

On and Off 22

Turing Your Phone On 22

Turning Your Phone Off 22

Access Codes 22

PIN code 22

PIN2 code 23

PUK code 23

PUK2 code 23

Security code 23

Barring Password 23

General Functions 24

Making and Answering

Calls 24

Making a Call 24

Making a Call by Send key 24

Making International Calls 24

Ending a Call 24

Making a Call From the

Phonebook 25

Adjusting the Volume 25

Answering a Call 25

Signal Strength 26

Manner Mode 26

Entering Text 26

Phonebook 30

In-Call Menu 31

During a Call 31

Making a Second Call 31

Swapping Between

Two Calls 31

Answering an Incoming Call 31

Rejecting an Incoming Call 32

Muting the Microphone 32

Switching DTMF Tones

on During a Call 32

Multiparty or Conference

Calls 32

Making a Second Call 33

Setting Up a Conference

Call 33

Putting a Conference

Call on Hold 33

Activate the Conference

Call on Hold 33

Adding Calls to the

Conference Call 33

Displaying Callers in a

Conference Call 33

Private Call in a

Conference Call 33

Ending a Conference Call 34

Menu Tree 35

Selecting Functions and

Options 38

Messages 39

Text Messages 39

Write Message 39

Inbox 40

Outbox 41

Draft 41

Settings 42

Delete 42

Voice Messages 43

Listen to Voice Messages 43

Voice Mailbox Number 43

Info Service 44

Receive 44

Inbox 44

Topics 44

Alert 44

Auto Display 44

Language 45

Templates 45

Name Card 46

Check Memory 46

Call Register 47

Missed Calls 47

Received Calls 47

Dialed Calls 48

Delete Recent Calls 48

Call Durations 48

Last Call 48

Received Calls 48

Dialed Calls 48

All Calls 48

Call Costs 49

Last Call’s Cost 49

All Calls’ Cost 49

Cost Settings 50

Call Cost’s Limit 50

Set Tariff 50

Auto Display 50

Table of Contents

GPRS Information 51

WAP Information 51

External Device 51

Total Data 51

Profiles 52

Settings 54

Alarm Clock 54

Date & Time Settings 55

Date & Time 55

Auto Update 55

Phone Settings 56

Display Settings 56

Language 56

LED indicator 57

Call Settings 57

Call Divert 57

Answer Mode 58

Send My Number 58

Call Waiting 58

Minute Minder 59

Auto Redial 59

Closed User Group 59

Select Line 59

Security Settings 60

PIN Code Request 60

Call Barring Service 60

Fixed Dial Number 61

Change Codes 61

Network Settings 62

Automatic 62

Manual 62

Preferred 62

GPRS Settings 63

External Device 63

Reset Settings 64

Organizer 65

Schedule 65

Memo 67

Phonebook 68

Search 68

Add New 69

Speed Dials 70

Caller Groups 70

Copy All 71

Delete All 71

Settings 72

Information 72

Fun & Tools 73

Game 73

My Folder 74

Pictures 74

Animation 74

Sound 74

Unit Converter 75

Calculator 75

World time 76

Internet 77

Home 78

Push Message 79

Inbox 79

Receive 79

Profiles 80

Cache Settings 80

Clear Cache 80

Cache Check 81

WAP Information 81

Reset Profiles 81

Q & A 82

Accessories 85

Safety Guidelines 87

Glossary 101

Index 104

Important Information

This user guide contains important information on the use and

operation of this phone. Please read all the information carefully for

optimal performance and to prevent any damage to, or misuse of,

the phone. Any changes or modifications not expressly approved in

this user guide could void your warranty for this equipment.

Before You Start

Safety Instructions

WARNING! To reduce the possibility of electric shock, do not

expose your phone to high humidity areas, such as the bathroom,

swimming pool, etc.

Always store your phone away from heat. Never store

your phone in settings that may expose it to temperatures less than

32°F or greater than 104°F, such as outside during a snowstorm or

in your car on a hot day. Exposure to excessive cold or heat will

result in malfunction, damage and/or catastrophic failure.

Be careful when using your phone near other

electronic devices. RF emissions from your mobile phone may

affect nearby inadequately shielded electronic equipment. You

should consult with manufacturers of any personal medical devices

such as pacemakers and hearing aides to determine if they are

susceptible to interference from your mobile phone. Turn off your

phone in a medical facility or at a gas station.

Never place your phone in a microwave oven as this will cause the

battery to explode.

IMPORTANT! Please read the TIA SAFETY INFORMATION on

page 87 before using your phone.

Unpacking For Your Safety

Check to make sure that you have all the parts shown below

Handset Standard

Battery

User GuideTravel Adapter

Safety Information

Please read and observe the following information for the safe and

proper use of your phone and to prevent any unanticipated

damage. Also, keep the user’s manual in an accessible place at all

times after reading it.

▶Unplug the power cord and charger during a lightning storm to

avoid electric shock or fire.

▶Do not use your phone in high explosive areas as the phone

may generate sparks.

▶Do not put your phone in a place subject to excessive dust, and

keep the minimum required distance between the power cord

and heat sources.

▶Unplug the power cord prior to cleaning your phone, and clean

the power plug pin when it is dirty.

▶Do not damage the power cord by bending, twisting, pulling, or

subjecting it to heat. Do not use the plug if it is loose as it may

cause fire or electric shock.

▶Hold the power cord plug firmly to plug and unplug the power

cord. Ensure the plug is firmly connected. If it is not firmly

connected, it may cause excessive heat or fire.

▶Do not place a heavy item on the power cord. Do not allow the

power cord to be crimped as it may cause fire or electric shock.

▶Be careful not to let the battery contact metal conductors such

as a necklace or coins. When shorted, it may cause an

explosion.

▶Do not disassemble or impact the battery as it may cause

electric shock, short-circuit, and fire. Store the battery in a place

out of reach of children.

▶Using a damaged battery or placing a battery in your mouth may

cause serious injury.

▶Do not place items containing magnetic components such as a

credit card, phone card, bank book or a subway ticket, near

your phone. The magnetic strip can be damaged by the phone.

▶Do not hold or let the antenna come in contact with your body

during a call.

▶Talking on your phone for a long period of time may reduce the

call quality due to heat generated during the use of the phone.

▶Do not allow excessive vibration or impact to the phone.

▶When you do not plan to use the phone for a long period of time,

store it in a safe area with the power cord unplugged.

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications (FCC) of the United

States, with its action in Report and Order FCC 96-326, adopted an

updated safety standard for human exposure to radio frequency

(RF) electromagnetic energy emitted by FCC regulated

transmitters. Those guidelines are consistent with the safety

standard previously set by both U.S. and international standards

bodies.

The design of this phone complies with the FCC guidelines and

these international standards.

For Your SafetyFor Your Safety

CAUTION

Use only the supplied and approved antenna. Use of unauthorized

antennas or modifications could impair call quality, damage the

phone, void your warranty and/or result in violation of FCC

regulations.

Do not use the phone with a damaged antenna. If a damaged

antenna comes into contact with skin, a minor burn may result.

Contact your local dealer for a replacement antenna.

Body-worn Operation

This device was tested for typical body-worn operations with the

back of the phone kept 10mm between the use's body and the back of the phone.

To comply with FCC RF exposure requirements, a minimum separation

distance of 10 mm must be maintained between the

user’s body and the back of the phone. Third-party belt-clips,

holsters, and similar accessories containing metallic components

should not be used. Body-worn accessories that cannot maintain

3/4 inch (2 cm) separation distance between the user’s body and

the back of the phone, and have not been tested for typical body-

worn operations may not comply with FCC RF exposure limits and

should be avoided.

Vehicle Mounted External Antenna (optional,

if available)

A minimum separation distance of 8 inches (20 cm) must be

maintained between the user/bystander and the vehicle mounted

external antenna to satisfy FCC RF exposure requirements.

For more information about RF exposure, visit the FCC website at

www.fcc.gov

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules.

Operation is subject to the following two conditions: (1) This device

and its accessories may not cause harmful interference, and (2)

this device and its accessories must accept any interference

received, including interference that may cause undesired

operation.

Cautions for Battery

▶Do not disassemble.

▶Do not short-circuit.

▶Do not expose to high temperature: 60℃(140℉).

▶Do not incinerate.

Battery Disposal

▶Please dispose of your battery properly or bring to your local

wireless carrier for recycling.

▶Do not dispose in fire or with hazardous or flammable materials.

Adapter (Charger) Cautions

▶Using the wrong battery charger could damage your phone and

void your warranty.

▶The adapter or battery charger is intended for indoor use only.

Do not expose the adapter or battery charger to direct sunlight or

use it in places with high humidity, such as the bathroom.

For Your SafetyFor Your Safety

Your Phone

Your Phone’’

s Features

1. Earpiece

2,12. Left soft key / Right soft key: Each of these keys

perform the functions indicated by the text on the display

immediately above them.

3. Side keys: These keys are used to control the volume of key

tone in standby mode and speaker volume during a call.

4. Vibration key: Use to set the Manner Mode by pressing and

holding the left navigation key for about 3 seconds while in

standby mode.

5. Send key: You can dial a phone number and answer incoming

calls. Press this key in standby mode to quickly access the most

recent incoming, outgoing and missed calls.

6. Alphanumeric keys: These keys are used to dial a number in

standby mode and to enter number or characters in edit mode.

7. Microphone: Can be muted during a call for privacy.

8. Active flip: Open the flip to answer an incoming call and close

to end the call.

9. Display screen: Displays phone status icons, menu items,

Web information, pictures and more in full color.

10. Navigation key: Use for quick access to phone functions.

11. Confirmation key: Long press will launch the WAP browser.

Allows you to select and confirm menu options.

13. Message key: Use to retrieve or send voice and text

messages.

14. End/Power key: Allows you to power the phone on or off,

end calls, or return to Standby Mode.

Phone Components

1. Earpiece

8. Active flip

9. Display screen

10. Navigation key

2. Left soft key

3. Side keys

5. Send key

11. Confirmation

key

12. Right soft key

4. Vibration key

13. Massage key

14. End / Power key

7. Microphone

6. Alpha numeric

keys

Your Phone Your Phone

SIM Card

Socket

Battery Lock

Antenna

Cable Connector/

Battery Charging Connector

Handstrap Hole

Battery

Terminals

Icon Description

Indicates the strength of the network signal.

Indicates a call is in progress.

Indicates that you are roaming off the network.

Indicates that GPRS service is available.

Indicates the alarm has been set and is on.

Indicates the status of the battery charge.

Indicates the receipt of a text message.

Indicates the receipt of a voice message.

Indicates that the vibration ringer has been set.

Indicates the receipt of an e-mail message.

Indicates the Loud menu in Profiles.

Indicates the Quiet menu in Profiles.

Indicates the Headset menu in Profiles.

Indicates the Car menu in Profiles.

Indicates the General menu in Profiles.

Indicates that you can use the push message service.

Indicates the Schedule function.

Display Information

The table below describes various display indicators or icons that

appear on the phone’s display screen.

On-Screen Icons

Getting Started

Using the Battery, Charger and SIM

Card

Installing and Removing the Battery

▶To install, insert the battery into the opening on the back of the

phone and gently press down until the latch snaps into place.

▶To remove, first make sure the power is off. Press the battery

release latch up and remove the battery from the phone at a 45-

degree angle.

Installing the Battery

To install the battery, insert the bottom of the battery into the

opening on the back of the phone. Then push the battery down

until the latch clicks.

Removing the Battery

Turn the power off. (If power is left on, there is a chance you could

lose the stored telephone numbers and messages.)

Pressing the release latch upwards will detach the battery from the

phone.

Warning Do not force the connector as this may damage the

phone and/or the travel adapter.

Charging the Battery

Use of unauthorized accessories could damage your phone and

invalidate your warranty.

To use the travel adapter provided with your phone:

1. With the battery in position on the phone, connect the lead from

the travel adapter to the bottom of the phone. Check that the

arrow on the lead connector is facing towards the front of the

phone.

2. Connect the adapter to a standard AC wall outlet. Only use the

travel adapter that comes included with the package.

Getting StartedGetting Started

Disconnecting the charger

When charging is finished, disconnect the adapter from the power

outlet and from the phone by pressing on the gray tabs on both

sides of the connector while pulling the connector out.

Installing the SIM Card

When you subscribe to a cellular network, you are provided with a

plug-in SIM card loaded with your subscription details (PIN,

optional services available and so on).

Locate the SIM card socket in the back of the phone. Follow the

steps below to install the SIM card.

1. Remove the battery if attached.

2. Slide the SIM card into the SIM card holder so that the holder

locks the card in position.

Notice When you need to remove the SIM card, slide it towards

the top of the phone and take it out of the holder.

Notice

▶Before installing always make sure that the phone is switched off

and remove the battery.

▶The metal contact of the SIM card can be easily damaged by

scratches. Pay special attention to the SIM card while handling and

installing. Follow the instructions supplied with the SIM card.

Notice

▶The battery delivered with your phone has to be fully charged

before using it.

▶Do not remove the battery or the SIM card while charging.

▶If your phone is powered on while charging, you’ll see the bars in

the battery indicator icon cycle.

When the battery is fully charged, the bars in the battery indicator

icon will flash on and off

▶If your phone is powered off, the display will show the charging

status. “Charging” or “Full” will be displayed.

If the battery fails to charge completely:

▶After turning the phone on and off, please attempt to recharge the

battery.

▶After detaching and reattaching the battery, please attempt to

recharge the battery.

FUll

Charging

SIM

Getting StartedGetting Started

Turning Your Phone On and Off

Turning Your Phone On

1. Install a charged battery pack or connect the phone to an

external power source such as the vehicle power adapter or car

kit.

2. Press for more than five seconds.

3. Depending on the status of the PIN code Request setting you

may or may not need to enter it.

Turning Your Phone Off

1. Press for a few seconds.

Notice Like any other radio device, avoid any unnecessary contact

with the antenna while your phone is on.

Access Codes

You can use the access codes described in this section to avoid

unauthorized use of your phone. The access codes (except PUK

and PUK2 codes) can be changed by using the Change codes

feature [Menu 4-5-4].

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code protects your SIM

card against unauthorized use. The PIN code is usually supplied

with the SIM card. When the PIN Code Request is set to Enable,

your phone will request the PIN code every time it is switched on.

When the PIN Code Request is set to Disable, your phone

connects to the network directly without the PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required to

access functions such as Advice of Call Charge and Fixed Dial

Number. These functions are only available if supported by your

SIM card.

PUK code (4 to 8 digits)

The PUK (PIN Unblocking Key) code is required to change a

blocked PIN code. The PUK code may be supplied with the SIM

card. If not, contact your local service provider for the code. If you

lose the code, contact your service provider.

PUK2 code (4 to 8 digits)

The PUK2 code, supplied with some SIM cards, is required to

change a blocked PIN2 code. If you lose the code, contact your

service provider.

Security code (4 to 8 digits)

The security code protects the unauthorized use of your phone.

The default security code is set to “0000” and the security code is

required to delete all phone entries and to activate the Restore

Factory Settings menu. The security code default setting can be

modified from the Security Settings menu.

Barring Password

The barring password is required when you use the Call Barring

function. The password is obtained from the service provider when

you subscribe to this function. See page 65 for further details.

Making and Answering Calls

Making a Call

1. Make sure your phone is powered on.

2. Enter a phone number including the area code. To edit a

number on the display screen, press the right/left navigation

keys to move the cursor to desired position or simply press the

right/left navigation keys to erase one digit at a time.

▶Press and hold the right soft key[Clear] to erase the entire

number.

3. Press to call the number.

4. When finished, press .

Making a Call by Send Key

1. Press , and the most recent incoming, outgoing and missed

phone numbers will be displayed.

2. Select the desired number by using the navigation key.

3. Press .

Making International Calls

1. Press and hold the key for the international prefix. The “+”

character can be replaced with the international access code.

2. Enter the country code, area code, and the phone number.

3. Press .

Ending a Call

When you have finished a call, press the key.

Making a Call From the Phonebook

You can store names and phone numbers dialed frequently in the

SIM card as well as the phone memory known as the Phonebook.

You can dial a number by simply looking up a name in the

phonebook. For more details on the Phonebook feature, please

refer to page 68.

Adjusting the Volume

During a call, if you want to adjust the earpiece volume, use the

side keys of the phone.

In idle mode with the flip cover open, you can adjust the key

volume using the side keys.

Answering a Call

When you receive a call, the phone rings and the flashing phone

icon appears on the screen. If the caller can be identified, the

caller’s phone number(or name if stored in your phonebook) is

displayed.

1. Open the flip and press the key or the left soft key to answer

an incoming call. If the Any key menu option(Menu 4.4.2) has

been set to , any key press will answer a call except for the

key or the right soft key.

2. End the call by closing the phone or pressing the key.

General Functions General Functions

Notice

▶To reject an incoming call, press and hold the side keys on the left

side of the phone without opening the flip.

▶If the Flip open menu option(Menu 4.4.2) is set to , you do not

need to press any key. You can answer the call simply by opening

the flip.

Notice You can answer a call while using the phonebook or other

menu features.

Manner Mode (Quick)

When the flip is closed, Manner Mode can be activated by

pressing and hold down Side keys.

Signal Strength

Since the antenna is fixed, it does not extend. If you are inside a

building, being near a window may give you better reception. You

can see the strength of your signal by the signal indicator ( ) on

your phone’s display screen.

Entering Text

You can enter alphanumeric characters by using the phone’s

keypad. For example, storing names in the phonebook, writing a

message, creating a personal greeting or scheduling events in the

calendar all require entering text.

Following text input methods are available in the phone.

T9 Mode

This mode allows you to enter words with only one keystroke per

letter. Each key on the keypad has more than one letter. The T9

mode automatically compares your keystrokes with an internal

linguistic dictionary to determine the correct word, thus requiring

far fewer keystrokes than the traditional ABC mode.

ABC Mode

This mode allows you to enter letters by pressing the key labeled

with the required letter once, twice, three or four times until the

letter is displayed.

123 Mode (Numbers Mode)

Type numbers using one keystroke per number. To change to 123

mode in a text entry field, press key until 123 mode is

displayed.

Symbolic Mode

This mode allows you to enter special characters.

Changing the Text Input Mode

1. When you are in a field that allows characters to be entered, you

will notice the text input mode indicator in the upper right corner

of the display.

2. If you want to change modes, press the key. The available

modes are displayed.

Using the T9 Mode

The T9 predictive text input mode allows you to enter words easily

with a minimum number of key presses. As you press each key, the

phone begins to display the characters that it thinks you are typing

based on a built-in dictionary. As new letters are added, the word

changes to reflect the most likely candidate from the dictionary.

1. When you are in the T9 predictive text input mode, start entering

a word by pressing keys to . Press one key per letter.

▶The word changes as letters are typed - ignore what's on the

screen until the word is typed completely.

▶If the word is still incorrect after typing completely, press the

down navigation key once or more to cycle through the other

word options.

General FunctionsGeneral Functions

Write message

918

Options Back

En T9

Notice You can select a different T9 language from the menu option.

The default setting on the phone is T9 enabled mode.

To turn it off, select the T9 Off option from the menu.

Example: Press to type Good

Press [down navigation key] to type

Home

▶If the desired word is missing from the word choices list, add it

by using the ABC mode.

2. Enter the whole word before editing or deleting any keystrokes.

3. Complete each word with a space by pressing the key.

To delete letters, press right soft key[Clear]. Press and hold down

right soft key[Clear] to erase entire words.

Using the ABC Mode

Use the to keys to enter your text.

1.Press the key labeled with the required letter:

▶Once for the first letter

▶Twice for the second letter

▶And so on

2.To insert a space, press the key once. To delete letters,

press the right soft key[Clear]. Press and hold down the right

soft key[Clear] to clear the display.

Notice To exit the text input mode without saving your input,

press . The phone returns to the previous menu level.

Notice Refer to the table below for more information on the

characters available using the keys.

General FunctionsGeneral Functions

Characters in the Order Display

Upper Case Lower Case

. , - ¿? ¡ ! @1 . , - ¿? ¡ ! @1

A B C Á Ã Ç 2 a b c á ã ç 2

D E F É 3 d e f é 3

G H I Í 4 g h i í 4

J K L 5 j k l 5

M N O Ó Ñ 6 m n o ó ñ 6

P Q R S 7 p q r s 7

T U V Ú Ü 8 t u v ú ü 8

W X Y Z 9 w x y z 9

Space Key Space Key

Using the 123 (Numbers) Mode

The 123 Mode enables you to enter numbers in a text message

(a telephone number, for example).

Press the keys corresponding to the required digits before

manually switching back to the appropriate text entry mode.

Using the Symbol Mode

The Symbol Mode enables you to enter various symbols or special

characters.

To enter a symbol, press the key. Use the navigation keys to

select the desired symbol and press the [OK] key.

Key

Phonebook

You can store phone numbers and their corresponding names in

the memory of your SIM card.

In addition, you can store up to 255 numbers and names in the

phone memory.

The SIM card and phone memory, although physically separate,

are utilized like a single entity known as the Phonebook. (See page

67 for details)

General FunctionsGeneral Functions

In-Call Menu

Your phone provides a number of control functions that you can

use during a call. To access these functions during a call, press

the left soft key [Options].

During a Call

The menu displayed on the handset screen during a call is different

than the default main menu displayed when in idle screen, and the

options are described below.

Making a Second Call

You can get a number you wish to dial from the phonebook to

make a second call. Press the right soft key then select Search. To

save the dialed number into the phonebook during a call, press the

right soft key then select Add New.

Swapping Between Two Calls

To switch between two calls, press the left soft key, and then select

Swap.

Answering an Incoming Call

To answer an incoming call when the handset is ringing, simply

press the key. The handset is also able to warn you of an

incoming call while you are already on a call. A tone sounds in the

earpiece, and the display will show that a second call is waiting.

This feature, known as Call Waiting, is only available if your

network supports it. For details of how to activate and deactivate it

see Call Waiting [Menu 4-4-4].

If Call Waiting is on, you can put the first call on hold and answer

the second, by pressing or by pressing the left soft key, and

then selecting the Hold & Answer. You can end the current call and

answer the waiting call by pressing the left soft key and then

selecting End & Answer.

Rejecting an Incoming Call

You can reject an incoming call without answering by simply

pressing the key.

During a call, you can reject an incoming call by pressing the left

soft key, which is the [Menu] key and selecting the

Conference/Reject or by pressing the key.

Muting the Microphone

You can mute the microphone during a call by pressing the

[Menu] key then selecting Mute on. The handset can be

unmuted by pressing the Mute off menu. When the handset is

muted, the caller cannot hear you, but you can still hear them.

Switching DTMF Tones on During a Call

To turn DTMF tones on during a call, press the left soft key, and

then select DTMF on. DTMF tones can be turned off the same

way. DTMF tones allow your phone to make use of an automated

switchboard.

Multiparty or Conference Calls

The multiparty or conference service provides you with the ability to

have a simultaneous conversation with more than one caller, if your

network service provider supports this feature. A multiparty call can

only be set up when you have one active call and one call on hold,

both calls having been answered. Once a multiparty call is set up,

calls may be added, disconnected or separated (that is, removed

from the multiparty call but still connected to you) by the person

who set up the multiparty call. These options are all available from

the In-Call menu. The maximum callers in a multiparty call are five.

Once started, you are in control of the multiparty call, and only you

can add calls to the multiparty call.

General FunctionsGeneral Functions

Making a Second Call

You can make a second call while currently on a call. Enter the

second number and press the . When the second call is

connected, the first call is automatically placed on hold. You can

swap between calls, by selecting the left soft key and then

selecting Swap.

Setting Up a Conference Call

To set up a conference call, place one call on hold and while the

active call is on, press the left soft key and then select the

Conference/Join all.

Putting a Conference Call on Hold

To put a conference call on hold, press the left soft key, and then

select the Conference/Hold all.

Activate the Conference Call on Hold

To activate a conference call on hold, press the left soft key, and

then select the Conference/Join all.

Adding Calls to the Conference Call

To add a call to an existing conference call, press the left soft key,

and then select the Conference/Join all.

Displaying Callers in a Conference Call

To scroll through the numbers of the callers who make up a

conference call on the handset screen, press the up/down

navigation keys.

Private Call in a Conference Call

To have a private call with one caller from a conference call,

display the number of the caller you wish to talk to on the screen,

then press the left soft key. Select the Conference/Private to put all

the other callers on hold.

1. Messages (see page 39)

1.1 Text messages

1.1.1 Write message

1.1.2 Inbox

1.1.3 Outbox

1.1.4 Draft

1.1.5 Settings

1.1.6 Delete

1.2 Voice messages

1.2.1 Listen to voice

messages

1.2.2 Voice mailbox

number

1.3 Info service

1.3.1 Receive

1.3.2 Inbox

1.3.3 Topics

1.3.4 Alert

1.3.5 Auto display

1.3.6 Languages

1.4 Templates

1.5 Name card

1.6 Check memory

2. Call Register (see page 47)

2.1 Missed calls

2.2 Received calls

2.3 Dialed calls

2.4 Delete recent calls

2.4.1 Missed calls

2.4.2 Received calls

2.4.3 Dialed calls

2.4.4 All calls

2.5 Call durations

2.5.1 Last call

2.5.2 Received calls

2.5.3 Dialed calls

2.5.4 All calls

2.6 Call costs

2.6.1 Last call’s cost

2.6.2 All calls’ cost

2.7 Cost settings

2.7.1 Call cost’s limit

2.7.2 Set tariff

2.7.3 Auto display

2.8 GPRS information

2.8.1 WAP information

2.8.2 External device

2.8.3 Total data

Menu Tree

The following illustration shows the available menu structure and

indicates the:

▶Number assigned to each menu option.

▶Page where you can find the feature description.

Ending a Conference Call

Currently displayed caller from a conference call can be

disconnected by pressing the key. To end a conference call,

press the left soft key, and then select the Conference/End

multiparty. Selecting the left soft key then Conference/End all, will

end all the active and on-hold calls.

General Functions

*:Shown only if supported by CPHS(Common PCS Handset

Specification)

3. Profiles (see page 52)

3.1 Vibrate only

3.1.1 Activate

3.2 Silent

3.2.1 Activate

3.2.2 Personalize

3.2.3 Rename

3.3 General

3.3.1 Activate

3.3.2 Personalize

3.3.3 Rename

3.4 Loud

3.4.1 Activate

3.4.2 Personalize

3.4.3 Rename

3.5 Headset

3.5.1 Personalize

3.6 Car

3.6.1 Personalize

4 Settings (see page 54)

4.1 Alarm clock

4.2 Date & Time

settings

4.2.1 Date & Time

4.2.2 Auto update

4.3 Phone settings

4.3.1 Display settings

4.3.2 Languages

4.3.3 LED indicator

4. Settings (continued)

4.4 Call settings

4.4.1 Call divert

4.4.2 Answer mode

4.4.3 Send my number

4.4.4 Call waiting

4.4.5 Minute minder

4.4.6 Auto redial

4.4.7 Closed user group

4.4.8 Select line

4.5 Security settings

4.5.1 PIN code request

4.5.2

Call barring service

4.5.3 Fixed dial number

4.5.4 Change codes

4.6 Network settings

4.6.1 Automatic

4.6.2 Manual

4.6.3 Preferred

4.7 GPRS settings

4.8 Reset settings

5. Organizer (see page 65)

5.1 Schedule

5.2 Memo

5.3 Phonebook

5.3.1 Search

5.3.2 Add new

5.3.3 Speed dials

5.3.4 Caller groups

5.3.5 Copy all

5.3.6 Delete all

5.3.7 Settings

5.3.8 Information

6. Fun & Tools (see page 73)

6.1 Game

6.2 My folder

6.3.1 Picture

6.3.2 Animation

6.3.3 Sound

6.3 Unit converter

6.4 Calculator

6.5 World time

7. Internet (see page 77)

7.1 Home

7.2 Push messages

7.2.1 Inbox

7.2.2 Receive

7.3 Profiles

7.4 Cache settings

7.4.1 Clear cache

7.4.2 Cache check

7.5 WAP information

7.6 Reset profiles

8. MoviStar (see page 81)

8.1 Information

8.2 Activa

Menu TreeMenu Tree

*:Shown only if supported by CPHS(Common PCS Handset Specification)

Your phone offers a set of functions that allow you to customize the

phone. These functions are arranged in menus and sub-menus,

accessed via the two soft keys marked and . Each menu

and sub-menu allows you to view and alter the settings of a

particular function.

The roles of the soft keys vary according to the current context; the

label on the bottom line of the display just above each key

indicates its current role.

Text Messages

Your phone receives voice mail notification messages and Short

Message Service (SMS) messages.

Voice mail and SMS are network services. Please contact your

service provider for more information.

When the icon appears, you have received a new voice mail.

When the icon appears, you have received a new text

message. If the message memory is full, an error message is

displayed, the icon flashes and you cannot receive any new

messages. Use the Delete option in the Inbox (Menu 1.1.2) to

delete obsolete messages. Once there is space in the memory any

undelivered SMS messages will be received (provided sufficient

space is available).

Write Message

You can write and edit text messages of up to 918 characters.

1. Type in a message using key presses. For details on how to

enter text, refer to page 26 (Entering Text).

2. After completing the message select the required option by

pressing the left soft key [Options].

The following options are available.

▶Send to number: Enter the phone number or select the

number from the phone book.

▶Send to email: Enter the email or select the email from the

phone book.

▶Save to draft: Save the message so that it can be sent later.

▶Attach:

• Symbol: Attach special characters.

• Picture: Send and receive text messages that contain

pictures, known as “picture messages”. Several preset

pictures are available in the phone and they can be replaced

with new ones received from other sources.

Press the left soft key

to access the

available menu.

Press the right soft

key to access the

available names.

Messages

Selecting Functions and Options

Menu 1.1

(Menu 1.1.1)

*:Shown only if supported by SIM card

• Animation: Attaching an animation in a message can be

done through EMS(Enhanced Messaging Service).

• Sound: Attach sounds that are available for short message.

• Text template: Use the text templates already set in the

phone.

• Phone number: Attach a phone number.

• Name card: Attach your name card.

▶T9 languages: Choose between English or Spanish T9

language. For details on how to enter text, refer to page 27

(Using the T9 Mode).

▶Clear text: Deletes the written message.

▶Exit: Exit the text editor.

Inbox

Received text messages, page messages, and email lists may be

searched and the contents may be viewed.

Received messages are displayed from newest to oldest.

1. Press the left soft key [Menu].

2. Press .

3. Select .

MessagesMessages

The following options are available.

▶Reply: Replies to the received message.

▶Forward: Forwards a received message to other recipients.

After recipients are entered, the message can be forwarded.

▶Return call: Call back the sender.

▶Extract: Extract picture, sound, text webpage and email

address from the message. They will be saved in My Folder,

phonebook or bookmarks.

▶Delete: Deletes the selected message from the Inbox.

(Menu 1.1.2)

Outbox

View lists and contents of sent messages in this menu and also

verify if transmission was successful.

The following options are available.

▶▶Forward: Forwards the current message to other recipients.

▶▶Delete: Deletes the selected message from the Outbox.

(Menu 1.1.3)

Draft

This menu option shows the preset message list. Scroll through the

list using the up/down navigation keys.

The following options are available.

▶▶Send: Sends the current message to other recipients.

▶▶Delete: Deletes the selected preset message.

(Menu 1.1.4)

Icon directive

[ ] Read SIM email

[ ] Unread SIM email

[ ] Read email

[ ] Unread email

[ ] Read SIM message

[ ] Unread SIM message

[ ] Read message

[ ] Unread message

[ ] Read delivery report

[ ] Unread delivery report

Icon directive

[ ] Sent SIM email

[ ] Sent email [ ] Sent SIM message

[ ] Sent message

Voice Messages

This menu provides you with a quick way of accessing your voice

mailbox (if provided by your network).

Before using this feature, you must enter the voice server number

obtained from your service provider.

When new voicemail is received, the symbol will be displayed on

the screen. Please check with your network service provider for

details of their service in order to configure the handset

accordingly.

Listen to Voice Messages

Once this option has been selected, simply press the left soft key

[OK] to listen to voicemail messages. You may also hold down the

key in standby mode to listen to voicemail messages.

Voice Mailbox Number

You can input and set the number of voice mail.

MessagesMessages

Settings

This menu allows you to set up default SMS information.

▶Message types: Allows you to set the default message type

(Text, Voice, Fax, Paging, X.400, E-mail, ERMES). The network

can convert the messages into the selected format. The type of

message you desire can be set to Text Type.

▶Valid period: Allows you to set the length of time for which

your text messages will be stored at the SMS center while

attempts are made to deliver them to the recipient. Possible

values are Maximum, 30minutes, 1hour, 6hours, 1day and

1week which can be authorized by your service provider.

▶Delivery reports: Allows you to activate or deactivate the

report function. When this function is activated, the network

informs you whether or not your message has been delivered.

▶Reply with same service: Allows the recipient of your SMS

message to send you a reply via your message center, if the

service is provided by the network.

▶Message center number: Allows you to store or change the

number of your email gateway required when sending text

messages. You must obtain this number from your service

provider.

▶Email gateway: Allows you to store or change the number of

your email gateway required when sending text messages.

▶Subject: If you set it to on, allows you to enter the subject.

▶Bearer setting: You can select Dual, GPRS or GSM. Contact

your network operator or service provider for information related

to setting a selected bearer, pricing and connection speed.

GSM Only/GPRS Only

Delete

Allows you to delete read and all messages.

Read messages/All messages

(Menu 1.1.5)

(Menu 1.1.6)

(Menu 1.2.1)

(Menu 1.2.2)

Menu 1.2

*:Shown only if supported by SIM card

MessagesMessages

Info Service

Info service messages are text messages sent by the network to

GSM phone users. They provide general information such as

weather reports, traffic news, taxis, pharmacies, and stock prices.

Each type of information is associated with a number, which can be

obtained from the service provider. When you receive an info

service message, a popup message will indicate a new message

receipt or the info service message will be displayed directly. In

standby mode, the following options are available when viewing the

info service message.

Receive

Ability to enable or disable the reception of broadcast messages.

Inbox

The list of received broadcast messages can be searched and the

contents viewed.

Topics

To create new topics, press the left soft key[OK] and then select

the new topics menu by pressing the left soft key [Options].

You can Deactivate, Edit, Delete and Add new topics by

pressing the left soft key [OK].

Alert

Ability to select the alert type for a new message.

Auto Display

This option will automatically display all broadcast messages

received. Scroll through the messages using the up/down

navigation keys.

Menu 1.3

(Menu 1.3.1)

(Menu 1.3.2)

(Menu 1.3.3)

Languages

This option allows you to select the language preferred. The cell

broadcast message will be displayed in the language selected.

If you use all languages supported by phone, select “Automatic”

at the bottom of the list.

(Menu 1.3.6)

(Menu 1.3.4)

(Menu 1.3.5)

Templates

There are 10 predefined messages in the list. You can view and

edit the template messages or create new messages.

• Please call me back

• I’m late. I will be there at

• Where are you now?

• I’m on the way.

• Top urgent. Please contact.

• I love you

The following options are available.

▶▶Edit: Allows you to write a new message or edit the selected

template message.

▶▶Delete: Allows you to delete the selected template message.

▶▶Send via text message: Sends the selected template

message by SMS.

▶▶Add new: Allows you to create new messages.

Menu 1.4

*:Shown only if supported by SIM card

Messages

Name Card

This option allows you to make your own name card. Key in the

Name, Mobile number, Office number,Fax number and E-mail

address.

▶Edit: Allows you to write a new message or edit the selected

name card.

▶Delete: Allows you to delete the selected name card.

▶▶Send via text message: Sends the selected name card by

SMS.

Check Memory

You can check how many free locations are in the phonebook

(card and phone memories).

Menu 1.5

Menu 1.6

Call Register

You can check the record of missed, received, and dialed calls

only if the network supports the Calling Line Identification (CLI)

within the service area.

The number and name (if available) are displayed together with the

date and time at which the call was made. You can also view call

times and costs.

Missed Calls

This option lets you view the last 10 unanswered calls. You can

also:

• View the number if available and call it, or save it in the

phonebook

• Enter a new name for the number and save both in the

phonebook

• Send a message by this number

• Delete the call from the list

• Delete all missed calls from the list

Received Calls

This option lets you view the last 10 incoming calls. You can also:

• View the number if available and call it, or save it in the

phonebook

• Enter a new name for the number and save both in the

phonebook

• Send a message by this number

• Delete the call from the list

• Delete all incoming calls from the list

Menu 2.1

Menu 2.2

Call Register

Dialed Calls

This option lets you view the last 10 outgoing calls(called or

attempted). You can also:

• View the number if available and call it or save it in the phonebook

• Enter new name for the number and save both in the phonebook

• Send a message by this number

• Delete the call from the list

• Delete all incoming calls from the list

Delete Recent Calls

Allows you to delete Missed, Received and Dialed call lists. You

can delete all call lists at one time.

Call Durations

Allows you to view the duration of your incoming and outgoing calls.

You can also reset the call times.

The following timers are available:

Last Call

Length of the last call.

Received Calls

Length of the incoming calls.

Dialed Calls

Length of the outgoing calls.

All Calls

Total length of all calls made and incoming calls since the timer was

last reset.

Menu 2.3

Call Register

Menu 2.5

Menu 2.4

(Menu 2.5.1)

(Menu 2.5.2)

(Menu 2.5.3)

(Menu 2.5.4)

Notice The actual time invoiced for calls by your service provider

may vary, depending upon network features, rounding-off

for billing, and so forth.

Call Costs

Call costs allows you to check the cost of the last call or all calls.

The call costs are displayed separately for each SIM card. To reset

the cost, you need the PIN2 code.

The following options are available:

Last Call’s Cost

Cost of the last call made.

All Calls’ Cost

Total cost of all calls made since the cost counter was last reset. If

the total cost exceeds the maximum cost set, you will no longer be

able to make any calls, except calls to the emergency services,

until you reset the counter.

Notice The actual cost invoiced for calls by your service provider

may vary, depending upon network features, rounding-off

for billing, tax, and so forth.

Menu 2.6

(Menu 2.6.1)

(Menu 2.6.2)

*:Shown only if supported by SIM card

Call RegisterCall Register

Cost Settings

Call Cost’s Limit

This network service allows you to limit the cost of your calls by

selected charging units. If you select Read, the number of

remaining unit is shown. If you select Change, you can change

your charge limit.

Set Tariff

You can set the currency type and the unit price. Contact your

service providers to obtain charging unit prices. To select the

Currency or 1 Unit in this menu, you need the PIN2 code.

Auto Display

This network service allows you to see automatically the cost of

your last calls. If you select On in Auto display menu, you can

see the cost of the last call when the call is released.

Note When all units have been used, no calls can be made

except emergency calls. Depending on the SIM card, you

need the PIN2 code to set a call cost limit.

Menu 2.7 GPRS Information

You can check the amount of data transferred over the network

through the GPRS information option. In addition, you can also view

how much time you are online.

WAP Information

You can check the data volume and the duration through WAP.

External Device

You can check the data volume and the duration through GPRS by

using an external device such as a serial port.

Total Data

You can check the total amount of data through WAP and an

external device.

Menu 2.8

(Menu 2.8.1)

(Menu 2.8.2)

(Menu 2.8.3)

(Menu 2.7.1)

(Menu 2.7.2)

(Menu 2.7.3)

Notice GPRS General Packet Radio Service

*:Shown only if supported by SIM card

In Profiles, you can adjust and customize the phone tones for

different events, environments, or caller groups.

There are six preset profiles: Vibrate only, Silent, General,

Loud, Headset and Car. Silent, General and Loud profiles can be

customized to meet your needs.

Changing the profile

1. A list of profiles opens.

2. In the Profiles list, scroll to a desired profile and select

“Activate”.

Customizing profiles (Personalize)

1. To modify a profile, scroll to the desired profile in the Profiles list

and select “Personalize”. A list of profile settings opens.

2. Scroll to the setting you want to change and press the up/down

navigation keys to open the following choices:

• Incoming call alert: To set the alert type for incoming call.

• Ringing tone: To set the ringing tone for voice calls, choose

one from the list. Scroll through the list and listen to the desired

tone prior to making a selection. Press any key to stop the

sound.

• Ringing volume: To set the volume level for the ringing tones.

• Message alert type: To set the alert type for messages.

• Message alert tone: To set the alert tone for messages.

• Key volume: To set the volume level for keypad tones.

Profiles

Customizing profiles (Rename)

1. To modify a profile, scroll to the desired profile in the Profiles list

and select “Rename”.

2. You can rename a profile and give it any name you want. The

Vibrate only, Headset and Car profiles cannot be

renamed.

Profiles

Settings

Alarm Clock

Set the alarm to ring at a specific time. In the Alarm Clock menu,

the following options are available.

On: Set the time(hour and minute) for activating the alarm.

1. Enter the menu.

2. Select [On] by pressing the right/left navigation keys.

3. If you want to set the time for activating the alarm, press the

down navigation key.

4. Enter the required time, press the down navigation key.

5. The following options are available.

• Once: The alarm rings only once and is then deactivated.

• Daily: The alarm rings every day at the same time.

• Weekly: The alarm rings every week on the same day and at

the same time.

• Monthly: The alarm rings every month on the same day and

at the same time.

6. Allows you to select the alarm melody by using the right/left

navigation keys.

7. Press the left soft key [Set].

Off: Cancel the alarm.

Menu 4.1 Date & Time Settings

Date & Time

This option allows you to change the current time and date

displayed.

The following options are available:

▶Set Date: Allows you to enter the day, month and year. You

can change the date format via the Date Format menu option.

Format : Allows you to change the time and date formats.

▶Date Format

YYYY/MM/DD(year/month/day)

DD/MM/YYYY(day/month/year)

MM/DD/YYYY(month/day/year)

▶Set Time: Allows you to enter the current time. You can

choose the time format via the Time Format menu option.

▶Time Format

24 hours/12 hours

Auto Update

Select On to set the phone to automatically update the time and

date according to the current time zone.

(Menu 4.2.1)

(Menu 4.2.2)

Menu 4.2

Settings

Notice If this option is set to On, the alarm will ring at the

specified time, even when the phone is switched off.

To stop the alarm when it rings, open the phone and press

the right soft key[Quit].

Phone Settings

Many different features of your phone can be customized to suit

your preferences. All of these features are accessed via the

Phone settings menu.

Display Settings

▶Wallpaper: You can set up the screen displayed on the LCD

screen in the standby mode.

▶Backlight: You can select whether or not the phone uses the

backlight. A marginal increase in the standby/talk time can be

achieved by turning the backlight off.

- Off means that the backlight is never on.

- 10 seconds turns the backlight off 10 seconds after the

last key was pressed.

- 30 seconds turns the backlight off 30 seconds after the

last key was pressed.

- 60 seconds turns the backlight off 60 seconds after the

last key was pressed.

- Always on turns the backlight always on while flip is

opened.

▶Contrast: This option allows you to adjust the contrast of the

LCD screen by pressing the navigation key.

Language

You can select the display language. When the language option is

set to Automatic, the language is automatically selected according

to the language of the SIM card used. English will be set if the

language on the SIM card is not supported in the phone.

(Menu 4.3.1)

(Menu 4.3.2)

(Menu 4.3.3)

Menu 4.3

SettingsSettings

Call Settings

To change the settings for call diverting:

Call Divert

When this network service is activated, you can direct your incoming

calls to another number, for example, to your voice mailbox number.

For details, contact your service provider. Select one of the divert

options, for example, select If busy to divert voice calls when your

number is busy or when you reject incoming calls.

The following options are available:

▶All voice calls: Diverts voice calls unconditionally.

▶▶If busy: Diverts voice calls when the phone is in use.

▶▶If no reply: Diverts voice calls which you do not answer.

▶▶If out of reach: Diverts voice calls when the phone is switched

off or out of coverage.

▶▶All data calls: Diverts to a number with a PC connection

unconditionally.

Menu 4.4

(Menu 4.4.1)

LED indicator

This option allows you to select whether or not the service light on

the top of the phone is used.

The following options are available.

▶Enable:

The service light flashes when the phone is ready for use.

▶Disable: The service light is not used

*:Shown only if supported by SIM card

▶▶All fax calls: Diverts to a number with a fax connection

unconditionally.

• Activate: Activates the corresponding service.

- To voice mail: Forwards to voice mail center. This function

does not include All data calls and All fax calls menus.

- To other number: Inputs the number for diverting.

• Cancel: Cancels the corresponding service.

• View status: Checking the status of the service.

▶▶Cancel all: Cancels all call divert service.

Answer Mode

Allows you to determine when to answer the phone.

▶▶Flip open: This option allows you to answer a call simply by

opening the flip.

▶▶Any key: You can answer an incoming call by pressing any

key, except the key.

▶▶Only send key: You can answer an incoming call by only

pressing the key.

Send My Number

This network service allows you to set your phone number to be

displayed (On) or hidden (Off) from the person to whom you are

calling. Select Set by network to reset the phone to the setting

that you have agreed upon with your service provider.

Call Waiting

The network will notify you of a new incoming call while you have a

call in progress. Select Activate to request the network to

activate call waiting, Cancel to request the network to deactivate

call waiting, or View status, to check if the function is active or

not.

(Menu 4.4.2)

SettingsSettings

(Menu 4.4.3)

(Menu 4.4.4)

Minute Minder

This option allows you to specify whether the phone must beep

every minute during an outgoing call to keep you informed of the

length of the call.

Auto Redial

Select On, and your phone will make a maximum of three attempts

to connect the call after an unsuccessful call attempt.

Closed User Group

Closed user group is a network service that specifies the group of

people whom you can call and who can call you. For more

information contact your network operator or service provider. If a

group index is specified, it is used for all outgoing calls. If no group

index is specified, the network will use the preferential index

(a specific index that is stored in the network).

▶▶Preset: Setting the selected CUG Index.

▶▶On: Activating and editing the CUG Index.

▶▶Off: Deleting the selected CUG.

Select Line

This setting is shown only if the SIM card supports two subscriber

numbers, that is, two phone lines. Select which phone line (Line 1

or Line 2) you want to use for making calls and sending short

messages. Calls on both lines can be answered irrespective of the

selected line.

(Menu 4.4.6)

(Menu 4.4.5)

(Menu 4.4.7)

(Menu 4.4.8)

Note You will not be able to make calls if you select Line 2 and

have not sbscribed to this network service.

*:Shown only if supported by SIM card

Security Settings

Various codes and passwords are used to protect the features of

your phone. They are described in the following sections (see

pages 22 ~ 23)

PIN Code Request

When the PIN code request feature is enabled, you must enter your

PIN each time you switch the phone on. Consequently, any person

who does not have your PIN cannot use your phone without your

approval.

The following options are available:

• Enable: You must enter the PIN each time the phone is switched

on.

• Disable: The phone connects directly to the network when you

switch it on.

Call barring service

Call barring allows you to restrict from making and receiving calls

with your phone. For this function, you need the barring password,

which you can obtain from your service provider.

The following options are available:

▶▶All outgoing: Calls cannot be made.

▶▶Outgoing international: International calls cannot be made.

▶▶Outgoing international except home country: When

abroad, calls can be made only to numbers within the current

country and to your home country, which is where your home

network provider is located.

▶▶All incoming: Calls cannot be received.

▶▶Incoming when abroad: Calls cannot be received when you

are using your phone outside your home service area.

Menu 4.5

(Menu 4.5.1)

(Menu 4.5.2)

Note Before disabling the PIN code request feature, you must

enter your PIN

SettingsSettings

▶▶Cancel all barrings: All call barring settings are deactivated;

calls can be made and received normally.

▶▶Change password: You can set and change the call barring

password obtained from your service provider using this option.

You must enter the current password before you can specify a

new one.Once you have entered a new password, you are

asked to confirm it by entering it again.

Fixed Dial Number(FDN)

Allows you to restrict your outgoing calls to selected phone

numbers, if this function is supported by your SIM card. The PIN2

code is required.

The following options are available:

▶▶Enable: You can only call phone numbers stored in the

phonebook. You must enter your PIN2.

▶▶Disable: You can call any number.

▶▶Number list: You can view the number list saved as fixed dial

number.

Change Codes

The Change codes feature allows you to change your current

password to a new one. You must enter the current password

before you can specify a new one.

You can change the access codes: Security code, PIN1

code, PIN2 code

Note To use Call Barring service, you must input the network

password. When calls are barred, calls may be possible to

certain emergency numbers in some networks.

Note PIN: Personal Identification Number.

(Menu 4.5.3)

(Menu 4.5.4)

Note Not all SIM cards have a PIN2. If your SIM card does not,

this menu option is not displayed.

*:Shown only if supported by SIM card

SettingsSettings

Network settings

The Network Settings feature enables you to indicate whether the

network used when roaming(outside your home area) is selected

Automatic, Manual, and Preferred.

Automatic

Allows you to set the phone to automatically search for and select

one of the cellular networks available in your area.

The phone will be set to Automatic even though the power is off

and on.

Manual

Allows you to select the desired network manually from a list of

networks. If the connection to the manually selected network is lost,

the phone will sound an error tone and ask you to select a network

again. The selected network must have a roaming agreement with

your home network, that is, the operator whose SIM card is in your

phone. The phone lets you select another network if the phone fails

to access the selected network. If you switch off the phone, the

phone will be reset to Automatic.

Preferred

You can set a list of preferred networks the handset should attempt

to register with first, before attempting to register to any other

networks. This list is created from the handset’s predefined list of

known networks.

Menu 4.6

(Menu 4.6.1)

(Menu 4.6.2)

(Menu 4.6.3)

Note You can select a network other than your home network only

if it has a valid roaming agreement with your home network.

GPRS Settings

GPRS (General Packet Radio Service) is a technology that allows

mobile phones to be used for sending and receiving data over the

mobile network. GPRS is a data bearer that enables wireless

access to data network such as the Internet.

The applications which use GPRS are WAP, MMS and SMS

messages.

Before you can use GPRS technology:

• You need to subscribe to the GPRS service. For availability and

subscription to GPRS service, contact your network operator or

service provider.

• You need to save the GPRS settings for the applications used

over GPRS.

Fees for GPRS and applications

Both the active GPRS connection and the applications used over

GPRS, for example WAP service, sending and receiving data and

SMS messages, require a fee. For more detailed information on

fees, contact your network operator or service provider.

External Device

When you use Internet via GPRS by using an external device, you

can set the following six profiles: Rename, APN, IP address,

DNS, User ID, and Password.

Menu 4.7

*:Shown only if supported by SIM card

Settings

Reset Settings

You can easily reset your phone to its default configuration. To do

so, proceed, as follows.

1. Select the Reset Settings menu option.

2. Enter the 4-digit phone password.

Menu 4.8

Note The password is preset to 0000.

Organizer

Schedule

When you enter this menu a calendar will be displayed. Top of the

screen indicates sections for date. Square cursor is used to locate

a particular day. The under bar on the calendar indicates a

schedule or memo on that day. This function helps to remind you of

the schedule and memo. The phone will sound an alarm tone if it

has been set for a specific note.

For changing the day, month, and year.

Menu 5.1

Note Your phone should be switched on to use this function.

• View

Press [Options] to delete or edit the note you selected.

• Edit

Allows you to edit the schedule.

• Delete

Allows you to delete the schedule.

• Add new

You can edit maximum of 30 characters and create up to 30

notes.

• Calendar

Allows you to consult the calender.

Key Description

up/down navigation key

left/right navigation key

Weekly

Daily

• Scheduler tone

The phone can sound an alarm tone when the scheduled date for

an event has been reached with this option.

• View all schedules

Shows the notes that are set for all days. Use the up/down

navigation keys to browse through the note lists. You can use the

menu by press the left soft key [Options].

• Go to date

Allows you to jump to a specific date.

• Delete past

Delete past schedule event that has already been notified.

• Delete all

Delete all schedules. You are asked to confirm your action.

OrganizerOrganizer

Memo

To write, edit and delete a memo on a specific date, proceed as

follows.

1. Scroll to highlight Memo.

2. Press the left soft key [Add].

3. Input the memo and press the left soft key [Options].

The following options are available.

▶▶Save: Allows you to save the memo.

▶▶T9 languages: Allows you to select the T9 language to use in

memo.

▶▶Exit editor: Allows you to exit in memo editor.

1. Select a Memo.

2. Press the left soft key [Select].

3. Press the left soft key [Options].

The following options are available.

▶▶Edit: If you select a memo that already exists, you can press

the left soft key [Options →Edit] to edit the memo displayed.

▶▶Delete: Allows you to delete the memo. You can press the left

soft key [Options →Delete] to edit the memo displayed.

▶▶Add new: Add a new memo, up to 20 memos and 40

characters per each memo.

▶▶Delete all: Allows you to delete all memos. You are asked to

confirm your action.

Menu 5.2

Note You can see Edit, Delete,View all schedules, Delete

past, and Delete all menus dependent on setting of

the schedule.

OrganizerOrganizer

Phonebook

You can store phone numbers and their corresponding names in

the memory of your SIM card. In addition, you can store up to 255

numbers and names in the phone memory. The SIM card and

phone memories, although physically separate, are used as if they

were a single entity, called the phonebook.

1. To use the Phonebook, press the right soft key [Names] in

the standby mode.

2. To use the Phonebook, press the left soft key [Menu] in the

standby mode and select the Organizer.

1. When the idle screen is displayed, press the right soft key

[Names]. You are asked to enter a name.

2. Enter the start of the name that you wish to find and press

the left soft key [Search].

3. If you want to edit, delete, copy an entry, or to add the voice to

one, select [Options].

4. Once you have found the required entry, press the to dial

the number.

• View detail: To view in detail the selected name.

• Edit: You can edit the name, number, E-mail group and memo

by press the left soft key [OK].

• Delete: You can delete an entry.

• Write text message: You can write text a message. For

further details, see page 39.

• Copy: You can copy an entry from SIM to phone or from phone

to SIM.

Menu 5.3

(Menu 5.3.1)

Note To use the Phonebook, press the right soft key [Names] in

standby mode or press the left soft key [Menu], , .

Note You can also scroll through the phonebook from the

beginning, by pressing the left soft key [Search] directly.

Add New

You can add a phonebook entry by using this function. Phone

memory capacity is 255 entries. SIM card memory capacity

depends on the cellular service provider. You can also save 20

characters of name in the phone memory, and save characters in

the SIM card. The number of characters is dependent on the SIM.

1. Open the phonebook first by pressing the right soft key

[Names] in standby mode.

2. Scroll to highlight Add New, and press the left soft key [OK].

3. Enter a name and then press the down navigation key.

4. Enter a number and then press the down navigation key.

5. You can set a group for the entry by pressing the right/left

navigation key.

6. Press left soft key [Save].

You should say the words within 2 seconds, and the phone asks

you to say it again to ensure the accuracy of voice recognition.

(Menu 5.3.2)

Note The voice can only be attached to the main number which you

set. For example, if you change the main number, voice will

be automatically attached to the changed number. This

means that you cannot attach voice to mobile, office and

home numbers simultaneously. You can add a voice tag to a

phone number in the SIM card. The voice tag can be erased if

you remove or change the SIM card.

OrganizerOrganizer

Speed Dials

You can assign any of the keys, to with a name list entry.

You can call directly by pressing this key for 2-3 seconds.

1. Open the phonebook first by pressing the right soft key [Names]

in a standby mode.

2. Scroll to Speed Dials, then press the left soft key [OK].

3. If you want to add a number to speed dial, select <Empty>.

Then, you can search the name from the phonebook.

4. Select the name from the speed dial. You can change and delete

the name. In addition, you can call by this number, write text

message, and multimedia message.

Caller Groups

There are 7 predefined groups as well as one additional group

labeled Others where you can create your own lists.

1. You can set the phone to ring in a specific way and display a

preselected graphic icon when a particular person calls you.

2. Scroll to Caller Groups then press the left soft key [OK] to enter

this menu.

3. Every Group list will be displayed : Family, VIP, Friends,

Colleague, Group 1, Group 2, Others.

4. Select the Group name that you want to manage by pressing

the left soft key [Options].

5. You will see the following submenus under the predefined groups

except for the Others group.

• Member list: Allows you to see the member list in the group.

• Group ring tone: Allows you to select the ring tone to be used

when you receive a voice phone call from a person in the group.

• Group icon: Allows you to select the graphic icon to be

displayed when you receive a call from a person in the group.

(Menu 5.3.3)

(Menu 5.3.4)

• Add member: Allows you to add the member to the group.

• Delete member: Allows you to delete the member in the

group.

• Rename: Allows you to assign a name to the group.

Copy All

You can copy or move entries from the SIM card memory to the

phone memory and vice versa.

▶▶SIM to Phone: You can copy the entry from the SIM card to

phone memory.

▶▶Phone to SIM: You can copy the entry from the phone

memory to the SIM card.

The following options are available:

• Keep original: When copying, Original Dial Number is kept.

• Delete original: When copying, Original Dial Number will

be erased.

Delete All

You can delete all entries in the SIM, and Phone . This function

requires the security code except for Voice.

Press the key to return to the standby mode.

(Menu 5.3.5)

(Menu 5.3.6)

Organizer

Settings

1. Set memory: Scroll to highlight the Set memory option,

then press the left soft key [OK].

• If you select Variable when adding entry, the phone will ask

where to store.

• If you select SIM or Phone, the phone will store an entry to

the SIM or the phone.

2. Search by: Scroll to highlight the Search by option, then

press the left soft key [OK].

• If you select Variable, the phone will ask how to search.

• If you select Name or Number, the phone will search an

entry by Name or the Number.

3. Set View Detail:

• If you select On, you can view the information of each member

in details. (Menu 5.3.4)

• If you select Off, you can view only name of each member.

(Menu 5.3.4)

Information

▶▶Service dial number: You can view the list of Service Dialing

Numbers (SDN) assigned by your network provider(If supported

by the SIM card). Such numbers include the emergency,

directory assistance and voice mail numbers.

1. Select the Service dial number option.

2. The names of the available services will be shown.

3. Use the up/down navigation keys to select a service. Press the

key

▶▶Check memory: You can check how many names and

numbers are stored in the phonebook (SIM card and phone

memories).

▶▶Own number: Allows you to display your phone number in the

SIM card.

(Menu 5.3.7)

(Menu 5.3.8)

Fun & Tools

Game

When you select this game, the following options are available.

New game: Allows you to start a game.

High score: Enables you to view the highest score recorded for

the selected game.

Instruction: Help text on how to play the game.

Key info: Describes the buttons used by the game.

Continue: Allows you to continue playing the game.

Note The control keys are different depending on the game.

Each game includes an introduction on the main control

keys. The common keys are listed below.

Menu 6.1

[Common Key Function]

left/right soft keys : Game menu

: Game start

*:Shown only if supported by SIM card

Fun & Tools

(Menu 6.2.2)

(Menu 6.2.3)

Fun & Tools

Calculator

Using this feature, you can use the phone as a calculator. The

calculator provides the basic arithmetic functions: addition,

subtraction, multiplication and division(Can enter numbers up to the

second decimal place).

Using the Calculator

1. Enter the first number using the numeric keys.

2. Use the navigation keys to select a sign for calculation.

3. To calculate the result, press the left soft key [Result]or key.

Menu 6.4

Unit Converter

This converts any measurement into a unit you want.

There are 4 types that can be converted into units: Length,

Surface, Weight, and Volume.

1. You can select one of four unit types by pressing the left soft key

[Unit].

2. Select the standard value by using the left/right navigation keys.

3. Select the unit you want to convert by pressing the up/down

navigation keys.

4. You can check the converted value for the unit you want. Also,

you can input a decimal number by pressing the key.

Menu 6.3

Note To include a decimal point, press the key.

My Folder

Enables you to download pictures or sounds which can be used as

wallpaper or ringtone. You can view, listen, delete or rename

downloaded data.

In the My folder menu, the following options are available:

Pictures

1. Edit title

2. Delete

3. Delete all

Animation

1. Edit title

2. Delete

3. Delete all

Sound

1. Edit title

2. Delete

3. Delete all

Edit title: You can edit the title for each downloaded content.

Delete: You can delete each downloaded content.

Delete all: You can delete all downloaded content.

Menu 6.2

(Menu 6.2.1)

Fun & Tools

World Time

Allows you to check the current Greenwich Mean Time(GMT) and

51 major cities around the world, using the left/right navigation

keys.

The screen shows the city name, current date and time.

To select the time zone in which you are located, proceed as

follows:

1. Select the city corresponding to your time zone by pressing the

left/right navigation keys one or more times. The local date and

time are displayed.

2. Press the left soft key [Options].

3. If you want to set, press key.

4. If you want to set Summer time, press the key in

Options menu.

Menu 6.5

Internet

You can access various WAP(Wireless Application Protocol)

services such as banking, news, weather reports, and flight

information. These services are specially designed for mobile

phones and they are maintained by the WAP service providers.

Check the availability of WAP services, pricing and tariffs with your

network operator and/or the service provider whose service you

wish to use. Service providers will also give you instructions on how

to use their services.

Please contact your service provider to open an Internet account.

To use the Web Browser, you must indicate your phone number via

the Own number menu option (See page 78 for further details.)

To launch the browser in standby mode, press and hold down the

key.

Once connected, the homepage is displayed. The content

depends on the service provider.

You can open any WWW page by entering its URL address.

To exit the browser at any time, press the key. The idle screen

is displayed.

Navigating with the WAP Browser

You can surf the Internet using either the phone keys or the WAP

Browser menu.

Using the Phone Keys

When surfing the Internet, the phone keys function differently from

the phone mode.

Key Description

up/down navigation key Scroll each line of the content area

left navigation key Return to the previous page

Return to the startup homepage

Internet

Using the WAP Browser Menu

There are various menu options available when surfing the Wireless

Web.

▶▶Home: Connect the homepage which was set in active profile.

▶▶Reload: Connect the server again and then bring back the

page.

▶▶Bookmarks: Set the current homepage as a new bookmark or

move the established bookmark.

▶▶Set as bookmarks: Save the current URL as a bookmark.

You can also edit the bookmark title.

▶▶Message: Write and save the short message.

▶▶Push message: Save the push message.

▶▶Go to URL: Connect to the specific URL after editing.

▶▶Go to e-Mail server: Connect the current URL as an E-mail

server.

▶▶Set as e-Mail server: Save the current URL as an E-mail

server.

▶▶Clear cache: Remove the contents of cache memory .

Note The WAP Browser menus may vary, depending on your

version of the browser.

Internet

Home

Connect to a homepage. The homepage may be the site which is

defined in the activated profile. It will be defined by the Service

Provider if you have not defined it in the activated profile.

Menu 7.1

Menu 7.2

Push Messages

Inbox

You can order Push messages from WAP service providers.

Push messages are notifications of, for example, news headlines

and they may contain a text message or address of a WAP service.

For availability and subscription, contact your WAP service

provider.

Service providers can update an existing push message every time

a new push message is received. Messages can be updated even

if you have moved them to another folder. Push messages expire

and they are deleted automatically.

• Information: Shows the information of received push

messages.

• Load: Allows you to connect to a specific site using the

information in the received push message.

• Delete: Delete the selected push message.

Receive

You can set the option whether you will receive the message or not.

(Menu 7.2.1)

(Menu 7.2.2)

InternetInternet

Profiles

Profile is the network information to connect the Internet. Cingular

supports Telcel and GPRS telcel. This information of each profile

depends on the network. If you connect through GPRS, you

activate Cingular menu. In addition, in case of connecting network

through CSD (Circuit Switched Data) by Telcel, you can activate

home. If not, roam will be activated.

Express

1. Activate

2. Settings

3. Rename

Each profile has submenus as follows:

▶▶Activate: Connect the network by value which is in profile.

▶▶Settings: Edit the setting of value.

▶▶Rename: Revise the name of profile.

▶▶E-mail server

• Connect: Connect to the E-mail server that you configured.

• Edit address: Edit the E-mail address.

Menu 7.3 Cache Check

You can change the cache mode.

▶▶Always: The cache is always checked whenever URL loading

or navigating.

▶▶Start only: The cache is only checked when the WAP is

started.

▶▶Off: The cache is never checked.

WAP Information

The WAP Browser version is displayed.

Reset Profiles

You can reset profiles to return to original settings.

Menu 7.5

Menu 7.6

(Menu 7.4.2)

Cache Settings

The information or services you have accessed are stored in the

cache memory of the phone.

Clear Cache

The contents of cache memory will be removed.

Menu 7.4

(Menu 7.4.1)

Note A cache is a buffer memory, which is used to store data

temporarily.

Home

1. Activate

2. Settings

3. Rename

Roam

1. Activate

2. Settings

3. Rename

Q&A

Please check to see if any problems you have encountered with the

phone are described in this section before taking the phone in for a

service or calling a service engineer.

Q How do I view the list of outgoing calls, incoming calls and

missed calls?

A Press the key.

Q How do I clear all call history?

A Press the left soft key[Menu] and then the key.

Q How do I view all numbers stored in memory?

APress right soft key[Names] and then .

Q Why does not disappear from the screen?

A Check whether or not you are in a service area, and if you

continue to see please turn off the power and wait for

approximately 2 minutes to turn it back on. If there is no change,

check again after relocating to another area.

Q Why is the connection abrupt or not audible in certain areas?

AWhen frequency environment is unstable in a certain area,

connection may be abrupt and not audible. Relocate to another

area and try again.

QWhy is the connection not consistent or abrupt even when

established?

A When frequency is unstable or weak or if there are too many

users, connection may be cut off even after it was established.

Please try again later or attempt after relocating to other areas.

Q&A

QWhy does the LCD not turn on?

A Remove the battery and turn on the power after placing it back

on. If there is no change, fully charge the battery and try again.

Q Why is there an echo when a connection is made with certain

telephones in a certain area?

AThis is called the “Echo Phenomenon”, where it occurs if

connection volume is too high or caused by special properties

(semi electronic telephone exchange) of the equipment on the

other end.

QWhy does the phone heat up?

AThe phone may get hot when there is a very long call duration or

when games are played or even when surfing the Internet for a

long time. This has no effect upon the life of the product or

performance.

QWhy is there no ring tone, but only a blinking LCD screen?

APhone may be set to “Vibrate” or in “Silent” mode. In the Profiles

menu, please select “General” or “Loud”.

Q Why does the battery life get shorter in standby mode?

A The battery is worn out. As time passes, the battery life gradually

becomes shorter. If the battery lasts about half the amount of time

as when first purchased, it’s time to purchase a new battery.

QWhy does the battery run out so quickly during normal use?

AIt is due to the user environment or a large number of calls or

weak signal.

Q&A

QWhy is no number dialed when you recall a phonebook entry?

A Check that the number has been stored correctly, by using the

Phone book Search feature. Re-store them, if necessary.

QWhy can’t my correspondent reach me?

A Is you phone switched on ( pressed for more than three

seconds)? Are you accessing the right cellular network? Or, you

may have set an incoming call barring option.

QI cannot find the lock, PIN, or PUK code. What is my password?

A The default lock code is “0000”. If you forget or lose the lock

code, contact your phone dealer. If you forget or lose a PIN or

PUK code, or if you have not received such a code, contact

your network service provider

Travel Adapter

This adapter, allows you to charge

the battery.

It supports standard U.S. 120 Volt

60Hz outlets.

It takes 5 hours to charge a

completely discharged battery.

Vehicle Power Adapter

You can operate the phone and trickle

charge the phone battery from your

vehicle by using the vehicle power

adapter.

It takes 5 hours to charge a completely

discharged battery.

Battery

Standard battery is available.

There are a variety of accessories available for your mobile phone.

You can select these options according to your personal

communication requirements. Consult your local dealer for

availability.

Accessories

TIA Safety Information

Provided herein is the complete TIA Safety Information for Wireless

Handheld phones. Inclusion of the text covering Pacemakers,

Hearing Aids, and Other Medical Devices is required in the owner’s

manual for CTIA Certification. Use of the remaining TIA language is

encouraged when appropriate.

Exposure to Radio Frequency Signal

Your wireless handheld portable telephone is a low-power radio

transmitter and receiver. When it is ON, it receives and also sends

out radio frequency (RF) signals.

In August, 1996, the Federal Communications Commissions (FCC)

adopted RF exposure guidelines with safety levels for handheld

wireless phones. Those guidelines are consistent with the safety

standards previously set by both U.S. and international standards

bodies:

ANSI C95.1 (1992) *

NCRP Report 86 (1986)

ICNIRP (1996)

Those standards were based on comprehensive and periodic

evaluations of the relevant scientific literature. For example, over

120 scientists, engineers, and physicians from universities,

government health agencies, and industry reviewed the available

body of research to develop the ANSI Standard (C95.1).

*American National Standards Institute; National Council on

Radiation Protection and Measurements; International Commission

on Non-Ionizing Radiation Protection

The design of your phone complies with the FCC guidelines (and

those standards).

Antenna Care

Use only the supplied or an approved replacement antenna.

Unauthorized antennas, modifications, or attachments could

damage the phone and may violate FCC regulations.

Safety Guidelines

Data Cable Kit

Connects your phone to a PC.

Headset

Connects to your phone, allowing

hands-free operation. Includes

earpiece, microphone, and integrated

call answer/termination button.

▶Should ALWAYS keep the phone more than six inches from their

pacemaker when the phone is turned ON;

▶Should not carry the phone in a breast pocket.

▶Should use the ear opposite the pacemaker to minimize the

potential for interference.

▶If you have any reason to suspect that interference is taking

place, turn your phone OFF immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids.

In the event of such interference, you may want to consult your

service provider.

Other Medical Devices

If you use any other personal medical device, consult the

manufacturer of your device to determine if they are adequately

shielded from external RF energy. Your physician may be able to

assist you in obtaining this information.

Turn your phone OFF in health care facilities when any regulations

posted in these areas instruct you to do so. Hospitals or health care

facilities may be using equipment that could be sensitive to

external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded

electronic systems in motor vehicles. Check with the manufacturer

or its representative regarding your vehicle.

You should also consult the manufacturer of any equipment that

has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices so

require.

Aircraft

FCC regulations prohibit using your phone while in the air. Turn

your phone OFF before boarding an aircraft.

Phone Operation

NORMAL POSITION: Hold the phone as you would any other

telephone with the antenna pointed up and over your shoulder.

Tips on Efficient Operation

For your phone to operate most efficiently:

▶Antenna is fixed and does not extend. This line is not necessary.

▶Do not touch the antenna unnecessarily when the phone is in

use. Contact with the antenna affects call quality and may cause

the phone to operate at a higher power level than otherwise

needed.

Driving

Check the laws and regulations on the use of wireless phones in

the areas where you drive. Always obey them. Also, if using your

phone while driving, please:

▶Give full attention to driving — driving safely is your first

responsibility;

▶Use hands-free operation, if available;

▶Pull off the road and park before making or answering a call if

driving conditions so require.

Electronic Devices

Most modern electronic equipment is shielded from RF signals.

However, certain electronic equipment may not be shielded

against the RF signals from your wireless phone.

Pacemakers

The Health Industry Manufacturers Association recommends that a

minimum separation of six (6”) inches be maintained between a

handheld wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are

consistent with the independent research by and recommendations

of Wireless Technology Research.

Persons with pacemakers:

Safety GuidelinesSafety Guidelines

Blasting Areas

To avoid interfering with blasting operations, turn your phone OFF

when in a “blasting area” or in areas posted: “Turn off two-way

radio”. Obey all signs and instructions.

Potentially Explosive Atmosphere

Turn your phone OFF when in any area with a potentially explosive

atmosphere and obey all signs and instructions. Sparks in such

areas could cause an explosion or fire resulting in bodily injury or

even death.

Areas with a potentially explosive atmosphere are often, but not

always, marked clearly. Potential areas may include: fueling areas

(such as gasoline stations); below deck on boats; fuel or chemical

transfer or storage facilities; vehicles using liquefied petroleum gas

(such as propane or butane); areas where the air contains

chemicals or particles (such as grain, dust, or metal powders); and

any other area where you would normally be advised to turn off

your vehicle engine.

For Vehicles Equipped with an Air Bag

An air bag inflates with great force. DO NOT place objects,

including either installed or portable wireless equipment, in the

area over the air bag or in the air bag deployment area. If in-vehicle

wireless equipment is improperly installed and the air bag inflates,

serious injury could result.

FDA Consumer Update

The U.S. Food and Drug Administration’s Center for Devices and

Radiological Health Consumer Update on Mobile Phones.

1.Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health

problems are associated with using wireless phones. There is no

proof, however, that wireless phones are absolutely safe.

Wireless phones emit low levels of radiofrequency energy (RF) in

the microwave range while being used. They also emit very low

levels of RF when in the standby mode. Whereas high levels of

RF can produce health effects (by heating tissue), exposure to

low level RF that does not produce heating effects causes no

known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies

have suggested that some biological effects may occur, but such

findings have not been confirmed by additional research. In some

cases, other researchers have had difficulty in reproducing those

studies, or in determining the reasons for inconsistent results.

2.What is the FDA's role concerning the safety of

wireless phones?

Under the law, the FDA does not review the safety of radiation-

emitting consumer products such as wireless phones before they

can be sold, as it does with new drugs or medical devices.

However, the agency has authority to take action if wireless

phones are shown to emit radiofrequency energy (RF) at a level

that is hazardous to the user. In such a case, the FDA could

require the manufacturers of wireless phones to notify users of

the health hazard and to repair, replace, or recall the phones so

that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory

actions, the FDA has urged the wireless phone industry to take a

number of steps, including the following:

Safety GuidelinesSafety Guidelines

▶Support needed research into possible biological effects of RF

of the type emitted by wireless phones;

▶Design wireless phones in a way that minimizes any RF

exposure to the user that is not necessary for device function;

and

▶Cooperate in providing users of wireless phones with the best

possible information on possible effects of wireless phone use

on human health.

The FDA belongs to an interagency working group of the federal

agencies that have responsibility for different aspects of RF safety

to ensure coordinated efforts at the federal level. The following

agencies belong to this working group:

o National Institute for Occupational Safety and Health

o Environmental Protection Agency

o Occupational Safety and Health Administration

o National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency

working group activities, as well.

The FDA shares regulatory responsibilities for wireless phones with

the Federal Communications Commission (FCC). All phones that

are sold in the United States must comply with FCC safety

guidelines that limit RF exposure. The FCC relies on the FDA and

other health agencies for safety questions about wireless phones.

The FCC also regulates the base stations that the wireless phone

networks rely upon. While these base stations operate at higher

power than do the wireless phones themselves, the RF exposures

that people get from these base stations are typically thousands of

times lower than those they can get from wireless phones. Base

stations are thus not the subject of the safety questions discussed

in this document.

3.What kinds of phones are the subject of this

update?

The term “wireless phone” refers here to handheld wireless

phones with built-in antennas, often called “cell”, “mobile”, or

“PCS” phones. These types of wireless phones can expose the

user to measurable radiofrequency energy (RF) because of the

short distance between the phone and the user’s head.

These RF exposures are limited by FCC safety guidelines that

were developed with the advice of the FDA and other federal

health and safety agencies. When the phone is located at greater

distances from the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly with

increasing distance from the source. The so-called “cordless

phones,” which have a base unit connected to the telephone

wiring in a house, typically operate at far lower power levels, and

thus produce RF exposures far below the FCC safety limits.

4.What are the results of the research done

already?

The research done thus far has produced conflicting results, and

many studies have suffered from flaws in their research methods.

Animal experiments investigating the effects of radiofrequency

energy (RF) exposures characteristic of wireless phones have

yielded conflicting results that often cannot be repeated in other

laboratories. A few animal studies, however, have suggested that

low levels of RF could accelerate the development of cancer in

laboratory animals. However, many of the studies that showed

increased tumor development used animals that had been

genetically engineered or treated with cancer-causing chemicals

so as to be pre-disposed to develop cancer in the absence of RF

exposure. Other studies exposed the animals to RF for up to 22

hours per day. These conditions are not similar to the conditions

under which people use wireless phones, so we don’t know with

certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since

December 2000. Between them, the studies investigated any

Safety GuidelinesSafety Guidelines

possible association between the use of wireless phones and

primary brain cancer, glioma, meningioma, or acoustic neuroma,

tumors of the brain or salivary gland, leukemia, or other cancers.

None of the studies demonstrated the existence of any harmful

health effects from wireless phone RF exposures. However, none

of the studies can answer questions about long-term exposures,

since the average period of phone use in these studies was

around three years.

5.What research is needed to decide whether RF

exposure from wireless phones poses a health

risk?

A combination of laboratory studies and epidemiological studies of

people actually using wireless phones would provide some of the

data that are needed. Lifetime animal exposure studies could be

completed in a few years. However, very large numbers of animals

would be needed to provide reliable proof of a cancer promoting

effect if one exists. Epidemiological studies can provide data that

is directly applicable to human populations, but 10 or more years

follow-up may be needed to provide answers about some health

effects, such as cancer. This is because the interval between the

time of exposure to a cancer-causing agent and the time tumors

develop — if they do — may be many, many years. The

interpretation of epidemiological studies is hampered by difficulties

in measuring actual RF exposure during day-to-day use of wireless

phones. Many factors affect this measurement, such as the angle

at which the phone is held, or which model of phone is used.

6.What is the FDA doing to find out more about

the possible health effects of wireless phone

RF?

The FDA is working with the U.S. National Toxicology Program and

with groups of investigators around the world to ensure that high

priority animal studies are conducted to address important

questions about the effects of exposure to radiofrequency energy

(RF).

The FDA has been a leading participant in the World Health

Organization International Electromagnetic Fields (EMF) Project

since its inception in 1996. An influential result of this work has

been the development of a detailed agenda of research needs

that has driven the establishment of new research programs

around the world. The project has also helped develop a series of

public information documents on EMF issues.

The FDA and the Cellular Telecommunications & Internet

Association (CTIA) have a formal Cooperative Research and

Development Agreement (CRADA) to do research on wireless

phone safety. The FDA provides the scientific oversight, obtaining

input from experts in government, industry, and academic

organizations. CTIA-funded research is conducted through

contracts with independent investigators. The initial research will

include both laboratory studies and studies of wireless phone

users. The CRADA will also include a broad assessment of

additional research needs in the context of the latest research

developments around the world.

7.How can I find out how much radio frequency

energy exposure I can get by using my

wireless phone?

All phones sold in the United States must comply with Federal

Communications Commission (FCC) guidelines that limit radio

frequency energy (RF) exposures. The FCC established these

guidelines in consultation with the FDA and the other federal

health and safety agencies. The FCC limit for RF exposure from

wireless telephones is set at a Specific Absorption Rate (SAR) of

1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with

the safety standards developed by the Institute of Electrical and

Electronic Engineering (IEEE) and the National Council on

Radiation Protection and Measurement. The exposure limit takes

into consideration the body’s ability to remove heat from the

tissues that absorb energy from the wireless phone and is set

well below levels known to have effects. Manufacturers of

wireless phones must report the RF exposure level for each

Safety GuidelinesSafety Guidelines

model of phone to the FCC. The FCC website

(http://www.fcc.gov/oet/ rfsafety) gives directions for locating the

FCC identification number on your phone so you can find your

phone’s RF exposure level in the online listing.

8.What has the FDA done to measure the radio

frequency energy coming from wireless

phones?

The Institute of Electrical and Electronic Engineers (IEEE) is

developing a technical standard for measuring the radio

frequency energy (RF) exposure from wireless phones and other

wireless handsets with the participation and leadership of FDA

scientists and engineers. The standard, “Recommended Practice

for Determining the Spatial-Peak Specific Absorption Rate (SAR)

in the Human Body Due to Wireless Communications Devices:

Experimental Techniques,” sets forth the first consistent test

methodology for measuring the rate at which RF is deposited in

the heads of wireless phone users. The test method uses a

tissue-simulating model of the human head. Standardized SAR

test methodology is expected to greatly improve the consistency

of measurements made at different laboratories on the same

phone. SAR is the measurement of the amount of energy

absorbed in tissue, either by the whole body or a small part of the

body. It is measured in watts/kg (or milliwatts/g) of matter. This

measurement is used to determine whether a wireless phone

complies with safety guidelines.

9.What steps can I take to reduce my exposure

to radiofrequency energy from my wireless

phone?

If there is a risk from these products — and at this point we do

not know that there is — it is probably very small. But if you are

concerned about avoiding even potential risks, you can take a

few simple steps to minimize your exposure to radiofrequency

energy (RF). Since time is a key factor in how much exposure a

person receives, reducing the amount of time spent using a

wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone

every day, you could place more distance between your body

and the source of the RF, since the exposure level drops off

dramatically with distance. For example, you could use a headset

and carry the wireless phone away from your body or use a

wireless phone connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless

phones are harmful. But if you are concerned about the RF

exposure from these products, you can use measures like those

described above to reduce your RF exposure from wireless

phone use.

10.What about children using wireless phones?

The scientific evidence does not show a danger to users of

wireless phones, including children and teenagers. If you want

to take steps to lower exposure to radiofrequency energy (RF),

the measures described above would apply to children and

teenagers using wireless phones. Reducing the time of

wireless phone use and increasing the distance between the

user and the RF source will reduce RF exposure.

Some groups sponsored by other national governments have

advised that children be discouraged from using wireless

phones at all. For example, the government in the United

Kingdom distributed leaflets containing such a

recommendation in December 2000. They noted that no

evidence exists that using a wireless phone causes brain

tumors or other ill effects. Their recommendation to limit

wireless phone use by children was strictly precautionary; it

was not based on scientific evidence that any health hazard

exists.

11.What about wireless phone interference with

medical equipment?

Radio frequency energy (RF) from wireless phones can interact

with some electronic devices. For this reason, the FDA helped

develop a detailed test method to measure electromagnetic

Safety GuidelinesSafety Guidelines

interference (EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test method is now

part of a standard sponsored by the Association for the

Advancement of Medical instrumentation (AAMI). The final

draft, a joint effort by the FDA, medical device manufacturers,

and many other groups, was completed in late 2000. This

standard will allow manufacturers to ensure that cardiac

pacemakers and defibrillators are safe from wireless phone

EMI.

The FDA has tested hearing aids for interference from

handheld wireless phones and helped develop a voluntary

standard sponsored by the Institute of Electrical and Electronic

Engineers (IEEE). This standard specifies test methods and

performance requirements for hearing aids and wireless

phones so that no interference occurs when a person uses a

“compatible” phone and a “compatible” hearing aid at the

same time. This standard was approved by the IEEE in 2000.

The FDA continues to monitor the use of wireless phones for

possible interactions with other medical devices. Should

harmful interference be found to occur, the FDA will conduct

testing to assess the interference and work to resolve the

problem.

12.Where can I find additional information?

For additional information, please refer to the following

resources:

FDA web page on wireless phones

(http://www.fda.gov/cdrh/phones/index.html)

Federal Communications Commission (FCC) RF Safety

Program

(http://www.fcc.gov/oet/rfsafety)

International Commission on Non-lonizing Radiation Protection

(http://www.icnirp.de)

World Health Organization (WHO) International EMF Project

(http://www.who.int/emf)

National Radiological Protection Board (UK)

(http://www.nrpb.org.uk/)

Consumer Information on SAR

(Specific Absorption Rate)

This Model Phone Meets the Government’s

Requirements for Exposure to Radio Waves.

Your wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed the emission limits for

exposure to radio frequency (RF) energy set by the Federal

Communications Commission (FCC) of the U.S. Government.

These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by

independent scientific organizations through periodic and thorough

evaluation of scientific studies. The standards include a substantial

safety margin designed to assure the safety of all persons,

regardless of age and health.

The exposure standard for wireless mobile phones employs a unit

of measurement known as the Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are

conducted using standard operating positions specified by the

FCC with the phone transmitting at its highest certified power level

in all tested frequency bands. Although SAR is determined at the

highest certified power level, the actual SAR level of the phone

while operating can be well below the maximum value. Because

the phone is designed to operate at multiple power levels to use

only the power required to reach the network, in general, the closer

you are to a wireless base station antenna, the lower the power

output.

Before a phone model is available for sale to the public, it must be

tested and certified to the FCC that it does not exceed the limit

established by the government-adopted requirement for safe

exposure. The tests are performed in positions and locations (e.g.,

at the ear and worn on the body) as required by the FCC for each

model. The highest SAR value for this model phone when tested for

use at the ear is 0.714 W/kg and when worn on the body, as

Safety GuidelinesSafety Guidelines

101

100

described in this user’s manual, is 0.482 W/kg. (Body-worn

measurements differ among phone models, depending upon

available accessories and FCC requirements.) While there may be

differences between SAR levels of various phones and at various

positions, they all meet the government requirement for safe

exposure.

The FCC has granted an Equipment Authorization for this model

phone with all reported SAR levels evaluated as in compliance with

the FCC RF emission guidelines. SAR information on this model

phone is on file with the FCC and can be found under the Display

Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID BEJG4010.

Additional information on Specific Absorption Rates (SAR) can be

found on the Cellular Telecommunications Industry Association

(CTIA) website at http://www.wow-com.com

*In the United States and Canada, the SAR limit for mobile phones

used by the public is 1.6 watts/kg (W/kg) averaged over one gram

of tissue. The standard incorporates a substantial margin of safety

to give additional protection for the public and to account for any

variations in measurements.

Safety Guidelines

To help you understand the main technical terms and abbreviations

used in this booklet and take full advantage of the feature on your

mobile phone, here are a few definitions.

Call Barring

Ability to restrict outgoing and incoming calls.

Call Diverting

Ability to reroute calls to another number.

Call waiting

Ability to inform users that they have an incoming call when

engaged on another call.

GPRS (General Packet Radio Service)

GPRS guaranties continuous connection to the Internet for mobile

phone and computer users. It is based on the Global System for

Mobile Communication(GSM) circuit-switched cellular phone

connections and the Short Message Service(SMS).

GSM (Global System for Mobile

Communication)

International standard for cellular communication, guaranteeing

compatibility between the various network operators. GSM covers

most European countries and many other parts of the world.

Line Identification Services (Caller ID)

Service allowing subscribers to view or block the telephone

numbers of callers.

Glossary

103

102

Glossary

Multiparty Calls

Ability to establish a conference call involving up to five additional

parties.

Phone Password

Security code used to unlock the phone when you have selected

the option to lock it automatically each time it switches on.

PIN (Personal Identification Number)

Security code that protects the phone/SIM card against

unauthorized use. The PIN is supplied by the service provider with

the SIM card. It may be a four to eight-digit number and can be

changed, as required.

PUK (PIN Unblocking Key)

Security code used to unlock the phone when an incorrect PIN has

been entered three times in succession. The eight-digit number is

supplied by the service provider with the SIM card.

Roaming

Use of your phone when you are outside your home area (when

traveling for example).

SDN (Service Dial Number)

Telephone numbers supplied by your network provider and giving

access to special services, such as voice mail, directory inquiries,

customer support and emergency services.

SIM (Subscriber Identification Module)

Card containing a chip with all the information required to operate

the phone (network and memory information, as well as the

subscriber's personal data). The SIM card fits into a small slot on

the back of the phone and is protected by the battery.

SMS (Short Message Service)

Network service sending and receiving messages to and from

another subscriber without having to speak to the correspondent.

The message created or received (up to 160 characters long) can

be displayed, received, edited or sent.

Glossary

105

104

Index

Access codes 22

Accessories 85

Active flip 14,15

Add new 31,45,69

Add member 71

Adjustiong the volume 25

Alarm clock 54

All calls 48

All call’s cost 49

Answering a call 25

Answer mode 58

Auto display 50

Auto redial 59

Backlight 56

Barring password 23,60,61

Battery 8,83,85

Bearer setting 42

Bookmarks 78

Cache check 81

Calculator 75

Calender 65

Caller groups 70

Call barring service 60,61

Call costs 49

Call cost’s limit 50

Call divert 61

Call durations 57,101

Call register 47

Call waiting 31,58,101

Cancel all barrings 61

Change password 61

Check memory 46,72

Clear cache 78,80

Closed user group 59

Conference calls 32

Contrast 56

Copy all 71

CPHS 35,36

Delete recent calls 48

Delivery reports 42

Dialed calls 53

Display screen 15

Display information 17

End key 14,15

Ending a call 24

Entering text 26

E-mail server 78,80

Index

FDN 61

Fixed dial number 61

Flip open 25,58

Game 73

General 52,83,101

Go to URL 78

GPRS 17,42,51,63,101

GPS information 51

Group icon 70

Group ring tone 70

Headset 17,52,85

Inbox 39,40,44,79

In-call menu 31

Internet 77

Languages 40,45,67

Last call 48,49

Last call’s cost 49

Lower case 29

Making a Call 24

Making international calls 24

Menu tree 35

Memo 67

Member list 70

Message key 15

Message types 42

Microphone 14,15,32

Minute minder 59

Missed calls 47

Mute off 32

Mute on 32

Muting the microphone 32

Multiparty calls 32

Name card 40,46

Navigation Key 14

Network 62

Outbox 41

Own number 72

PhoneBook 68

Phone to SIM 71

Power key 15

Private call 33

107

106

IndexIndex

Received Calls 47

Search 68

Security code 23

Send 15,24

Send my mumber 58

Set memory 72

Service dial number 72

Schedule 65,66

Scheduler tone 66

Side keys 15

Signal strength 26

Silent 53,83

SIM to phone 71

Speed dials 70

Summer time 76

Template 40,45

Text message 39

Time format 55

Travel adapter 85

Unit converter 75

Upper case 29

Valid period 42

Vibrate 52

View all schedules 66

Voice mailbox mumber 43

Voice message 43

Wallpaper 56

WAP browser 77,78

WAP information 51,81

Write message 39

1. Press the left soft key [Menu]

2. Scroll with the up/down navigation keys through the list of

menus until you reach the required menu.

3. Press the left soft key [OK]

4. Scroll with the up/down navigation keys through the list of

options until the required one is selected.

5. Press the left soft key [OK] to confirm.

Power on/off Press and hold .

Making a Call 1. Key in the number.

2. Press the key.

End a Call Briefly press the key.

Answer a Call Open the flip and

press the key.

Adjust the Volume Press the Side keys of

the phone.

Store numbers 1. Key in the number

2. Press the left soft key [Options]

3. Press the left soft key [OK]

4. Enter the name.

5. Press the left soft key [Save]

Choose the 1. In standby mode, press left navigation

key

2. Select an option:

Vibrate only, Silent, General, Loud.

3. Press the left/right navigation keys.

4. Press the key.

Search 1. Press the right soft key [Names]

2. Press the left soft key [OK]

3. Press the left soft key [Search]

(During a call)

in the Phonebook

Alert Type

Quick Reference Card

Access the Menu Function

Patent Information

This product was manufactured under one or more of the following U.S.

patents: 5276765 5749067 6061647

LG Electronics USA G4010 GSM Dual Band Mobile Phone User Manual

LG Electronics USA GSM Dual Band Mobile Phone

Contents

User Manual

Navigation menu

Namespaces

Views

Navigation