LG Electronics USA GM310G Cellular/ PCS WCDMA/ GSM/ GPRS/ EDGE Phone with Bluetooth User Manual

LG Electronics USA Cellular/ PCS WCDMA/ GSM/ GPRS/ EDGE Phone with Bluetooth Users Manual

UserManual.wiki >

LG Electronics USA >

GM310G User Manual HTML Version

Users Manual

GM310G User Guide - English

Some of contents in this manual may

differ from your phone depending

on the software of the phone or your

service provider.

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. “

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Part 15 Class B Compliance

This device and its accessories comply with part15 of FCC rules.

Operation is subject to the following two conditions:

(1) This device & its accessories may not cause harmful interference.

(2) This device & its accessories must accept any interference received,

including interference that may cause undesired operation.

Body-worn Operation

This device has been tested for typical body-worn operations

with the distance of 0.79inches (2.0cm) from the user’s body.

To comply with FCC RF exposure requirements, a minimum separation distance

of 0.79inches(2.0cm) must be maintained from the user's body.

Additionally, Belt clips, holsters & other body-worn accessories may not contain

metallic components.

LG GM310G | User Guide28

Calls

Making a call

1 Make sure your phone is on.

2 You can use the keypad after

opening the slide. To delete a digit

press C or the back arrow.

3 Press C to begin the call.

4 To end the call, press End key or

slide the cover closed.

TIP! To enter + when making

an international call, press and hold 0.

Making a call from your contacts

It’s easy to call anyone whose number

you have stored in your contacts.

1 Press Menu to open the main

menu. Select Contacts, then

select Search.

2 Using the keypad, enter the first

letter of the contact you want to

call and scroll to the contact.

3 Press Send key to begin the call.

Answering and rejecting a call

When your phone rings, press

Accept or press Send key to answer

the call.

While your phone is ringing you can

press Silent to mute the ringing.

This is useful if you have forgotten

to change your profile to silent for a

meeting.

Press End key or select Reject in

order to reject an incoming call.

Speed dialling

You can assign a speed dial number

to a contact you call frequently.

1 Press Menu to open the main

menu. Select Contacts, then

select Speed dials.

2 Your voicemail is preset to speed

dial 1 and you cannot change this.

Select any other number either

by using the navigation keys and

selecting Add or by pressing the

hard key number.

3 Your contacts will open. Select the

contact you’d like to assign to that

number using the navigation keys

then select OK.

To call a speed dial number, press

and hold the assigned number until

the contact appears on screen. The

call will begin automatically and there

is no need to press Send key.

Viewing your call logs

Press Menu and select Calling.

Choose Call logs.

All calls - View a complete list of all

your dialled, received and missed

calls.

Missed calls - View a list of any calls

you have missed.

Dialled calls - View a list of all the

numbers you have called.

Received calls - View a list of all the

numbers that have called you.

TIP! From any call log select

Options and then Delete to delete

selected items.

Using call divert

1 Press Menu and select Calling.

2 Select Call divert.

3 Choose whether to divert all calls,

when the line is busy, when there

is no answer and when you are

out of reach.

4 Choose Activate and select

whether to divert to voice mail, or

to other number.

5 Enter your divert number or select

Search to browse Contacts for

your divert number.

Note: Charges are incurred for

diverting calls. Please contact your

network provider for details.

TIP! To turn off all call diverts,

choose Deactivate all from the Call

divert menu.

LG GM310G | User Guide30

Using call barring

1 Press Menu and select Calling.

2 Select Call barring.

3 Choose any or all of the options:

All outgoing

Outgoing international

Outgoing international calls

except home country

All incoming

Incoming when abroad

Deactivate all

4 Enter the call barring password.

Please check with your network

operator for this service.

TIP! Select Fixed dial numbers from

the Calling menu to turn on and

compile a list of numbers which can

be called from your phone. You’ll need

your PIN2 code from your operator.

When activated, only numbers

included in the ﬁxed dial list can be

called from your phone.

Changing the call settings

1 Press Menu and select Calling.

2 From here you can amend the

settings for:

Call durations - View details of

how long you have spent on your

calls both received and dialled.

Data volume - View the amount

in kilobytes of all your received and

sent data.

Call costs - View the charges

applied to your last call or all calls.

This service is network dependent,

some operators are unable to

support this.

Call divert - Choose whether to

divert your calls.

Call barring - Select which calls

you would like to be barred.

Fixed dial numbers - Choose a

list of numbers that can be called

from your phone.

Call waiting - Be alerted when

you have a call waiting.

Calls

Common settings

Call reject - Select Off or On and

choose to reject all calls, those

from specific groups, contacts,

unregistered numbers (those not in

your list of contacts) or those with no

caller ID.

Send my number - Choose whether

your number will be displayed when

you call someone.

Auto redial - Allows you to set the

auto redial function when a call

attempt has failed.

Answer mode - Allows you to set the

answering method. You can choose

from Press send key, Slide up or

Press any key.

Minute minder - Determines

whether to sound a tone every 1

minute when you are on the phone.

BT answer mode - Choose how to

answer a call when using a Bluetooth

headset. Select Hands-free or

Handset.

Save new number - Selecting this

option will save numbers that are not

already in your contacts upon ending

the call.

Slide close setting - Set whether

or not a call is ended upon closing

the slide.

LG GM310G | User Guide32

Searching for a contact

1 Press Menu and select Contacts

then choose Search.

2 Using the keypad enter the first

letter of the name of the contact

you want to call.

3 To scroll through the contacts and

their different numbers use the

navigation keys.

Or, using the slightly quicker

method…

1 Enter the number you wish to

search on the home screen and

select Options.

2 Choose Search contacts in option

menu.

Adding a new contact

1 Press Menu and select Contacts

then choose Add new.

Choose whether to store your new

contact on your Handset or USIM card.

3 Enter the information you want in

the fields provided and select Done.

Or to use a slightly quicker method…

1 Enter the number you wish to store

and press Options.

2 Choose Save number, and

choose either New contact or

Update contact.

3 Enter the relevant information and

select Done.

Contact options

There are many things you can do

when viewing a contact. Here’s how

to access and use the options menu.

1 Press Menu and select Contacts

then choose Search.

2 Select Options to open the list of

options. From here you can:

Send message - Send a message

to the contact. If the contact has an

email address, select whether you’d

like to send a Message or Email.

Send business card - Send the

contact’s details to another person

as a business card. Choose to send

as a Text message, Multimedia

message, Email or via Bluetooth.

Make call - Directly make voice

call to a contact you choose.

Contact

Add new contact - Add a new

contact.

Edit - Change any of the contact’s

details.

Add to group - Add a contact to

a group.

Mark/Unmark - Choose whether

to mark a contact or unmark.

Search by - Search a contact by

Number or Group.

Save to USIM - Choose to move

or copy to the USIM card or phone

(depending on where you originally

saved the contact).

Delete - Delete the contact. Select

Yes only if you are sure.

Text input -You can insert symbol

a contact, change writing method

or language and add a word to

dictionary.

Creating a group

1 Press Menu and select Contacts.

2 Select Groups and choose

Options.

3 Select Add new group.

4 Enter a name for your new group.

5 Press Done.

Note: If you delete a group, the

contacts which were assigned to

that group will not be lost. They will

remain in your contacts.

TIP! You can edit an existing group by

highlighting it and selecting Options.

Choose to Add member to the

group from your contacts, select Edit

group and assign a Group ringtone,

Rename the group or Delete the

group.

Using service dial numbers

You can view the list of Service Dial

Numbers (SDN) assigned by your

service provider (if supported by the

USIM card). Such numbers include

emergency, directory enquiries and

voicemail numbers. After selecting a

service number, press Send key to

dial that service.

Viewing your own number

Select Own number in the Contacts

menu to view your number.

LG GM310G | User Guide34

Contact

Creating a business card

You can create your own business

card by selecting My business card,

then Add. Enter your name, number,

email address, image and etc.

Changing your contact settings

1 Press Menu and select Contacts.

2 Select Settings. From here you

can adjust the following settings:

Contact list settings - Choose

whether to view contacts saved

to both your Handset & USIM,

Handset only or USIM only. You

can also select to show the first

name or last name of a contact

first, and to show a contact

picture.

Copy - Copy your contacts from

your USIM card to your handset or

from your handset to your USIM

card. Choose to do this one by

one, or all together.

Move - This works in the same

way as Copy, but the contact

will only be saved to the location

you’ve moved it to. If you move a

contact from the USIM card to the

handset it will be deleted from the

USIM card memory.

Send all contacts via Bluetooth

- Send all contacts information to

another handset by Bluetooth.

Backup contacts - You can save

all the phonebook data in the

handset to an external memory

card by the form of vcard.

Restore contacts - You can restore

all the phonebook data in an

external memory card to the phone

memory by the form of vcard.

Clear contacts - Delete all your

contacts.

Memory info. - You can check

how much memory you’ve got

left on your handset or your USIM

card.

Messaging

Your GM310G includes functions

related to SMS (Short Message

Service), MMS (Multimedia Message

Service) as well as the network’s

service messages. To use these

functions, press Menu and select

Messaging.

Sending a message

1 Press Menu, select Messaging

and choose Create new

message.

2 Choose Message to send an SMS

or MMS.

3 A new message editor will open.

Message editor combines SMS

and MMS in one intuitive mode

that is easy to switch between.

The default setting of the message

editor is SMS mode.

4 Enter your message using the

keypad. See Entering text on the

right for more information on how

to enter text.

5 Select Options and choose Insert

to add an Image, Video, Sound,

Symbols, Template, Emoticon,

Name & Number, New slide,

Subject or More (Business

card/Schedule/Memo/To do/My

business card).

6 Choose Send.

7 Choose a contact from the list

of contacts or enter the phone

number.

8 Select Send.

WARNING: Image, Sound, Video,

New slide, Subject, Business card,

Schedule or My business card is

added to the message editor, it

will be automatically converted to

MMS mode and you will be charged

accordingly.

Entering text

You can enter alphanumeric

characters using the phone’s keypad.

For example, storing names in

contacts, writing a message and

creating scheduling events in the

calendar all require entering text.

Messaging

LG GM310G | User Guide36

The following text input methods are

available in the phone: T9 mode, Abc

mode, and 123 mode.

Note: Some fields may allow only

one text input mode (e.g. telephone

number in contact fields).

Text input mode using the

keypad

When you want to enter text, for

example when writing a message, the

keypad will default to T9 mode. If you

are entering a number, for example

when making a call, the keypad

number keys will default to numbers.

Setting up your email

You can stay in touch on the move

using email on your GM310G. It’s

quick and simple to set up a POP3 or

IMAP4 email account.

1 Press Menu, select Messaging

and choose Settings.

2 Select Email and choose Email

accounts.

3 Select Add new and follow the

pop up instruction and enter the

information required.

Sending an email using your

new account

To send/receive an email, you should

set up an email account (see above).

1 Press Menu, select Messaging

and choose Create new

message.

2 Choose Email and a new email

window will open.

3 Write a subject line then press OK.

4 Enter your message using the

keypad.

Retrieving your email

1 Press Menu and select

Messaging then choose Mailbox.

2 Select the account you want to

use.

3 Choose Retrieve and the phone

will connect to your email account

and retrieve your new messages.

Messaging

Message folders

Press Menu and select Messaging.

The folder structure used on your

GM310G should be self-explanatory.

Create new message - Create your

new message.

Inbox - All the messages you receive

are placed into your Inbox. From here

you can reply, forward and more.

Mailbox - All the mails you receive

are placed into your Mailbox.

Drafts - If you don’t have time to

finish writing a message, you can

save what you have written so far

in here.

Outbox - This is a temporary storage

folder used while messages are being

sent.

Sent items - Copies of all the

messages you send are kept into

your Sent folder.

My folders - You can move

messages of Inbox or Sent items

into My folders. Also you can move

those messages of My folders into

the original message box.

Templates - A list of pre written

useful messages, useful for a quick

reply.

Emoticons - You can add, edit and

delete emoticons. You can insert the

emoticon which you preferred on

writing a message.

Managing your messages

1 Press Menu, select Messaging

and choose Inbox.

2 Select Options and then choose

to:

Reply - Send a reply to the

selected message.

Forward - Send the selected

message on to another person.

Make call - Call the person who

sent you the message.

Save number - Save the number

of the message.

Delete - Delete the selected

message.

LG GM310G | User Guide38

Messaging

Create new message - Write a

new message or email regardless

who sent you message.

Mark/Unmark - Mark a message

or all.

Copy&Move - Choose to copy or

move the selected message to the

USIM card or phone.

Filter - Displays messages by

desired message types.

Message info - You can check the

message info of its type, subject,

where it is from and its date.

If you see the message No space for

USIM message, you should delete

some messages from your inbox to

create space.

If you see the message No space

for messages, you can delete either

messages or saved files to create

more space.

TIP! When you receive the message,

you can reply quickly by using Quick

reply function. While you see the

message, press Options and select

Quick reply. This is useful if you

need to reply the message during a

meeting.

TIP! While you see the message,

press Options and select Extract.

You can extract the information such

as a number, email address or web

address from the selected message.

Changing your text message

settings

Press Menu, select Messaging, then

choose Settings and Text message.

You can make changes to:

Text message centre - Enter the

details for your message centre.

Delivery report - Choose to receive

confirmation that your message have

been delivered.

Validity period - Choose how long

your messages are stored at the

message centre.

Message types - Convert your text

into Voice, Fax, X.400 or Email.

Character encoding - Choose how

your characters are encoded. This

affects the size of your message and

therefore data costs.

Send long text as - Choose whether

to send your message as SMS or

MMS when you enter a text longer

than 2 pages in the message field.

Changing your multimedia

message settings

Press Menu, select Messaging, then

choose Settings and Multimedia

message. You can make changes to:

Retrieval mode - Choose to

automatically or manually download

multimedia messages depending on

whether you are at home or roaming.

Delivery report - Choose to request

or allow a delivery report.

Read reply - Choose to request or

allow a read reply.

Priority - Choose the priority level of

your multimedia message.

Validity period - Choose how

long your message is stored at the

message centre.

Slide duration - Choose how long

your slides appear on screen.

Creation mode - Allows you to select

the contents type supported by MMS.

Delivery time - Configures the

delivery time of message to the

recipient. The multimedia message

centre will deliver the message after

the delivery time.

Multimedia msg. centre - Allows

you to configure network information

such as the multimedia service

centre and the internet profile to send

a multimedia message.

Changing your email settings

1 Press Menu, select Messaging

and choose Settings.

2 Select Email then you can adapt

the following settings:

Email accounts - You can set up

an email account.

LG GM310G | User Guide40

Allow reply email - Choose

to allow the sending of ‘read

confirmation’ messages.

Request reply email - Choose

whether to request read

confirmation messages.

Retrieve interval - Choose how

often your GM310G checks for

new email messages.

Retrieve amount - Choose the

number of emails to be retrieved

at any one time.

Include message in fwd & reply -

Choose whether or not to include

the original message.

Include attachment - Choose

whether or not to include the

original attachment.

Auto retrieval in roaming -

Choose whether or not to

automatically retrieve your

messages when abroad.

New email notification - Choose

whether or not to be alerted to

new emails.

Signature - Create an email

signature and switch this feature on.

Priority - Choose the priority level

of your email messages.

Changing your other settings

Press Menu, select Messaging, and

choose Settings then:

Voicemail - add a new voicemail

service. Contact your network

operator for more information on the

service they provide.

Service message - Choose to

receive or block service messages.

You can also set your message

security by creating trusted and

untrusted lists of senders.

Info. service - Choose the reception

status, channels and language of

your info messages.

Messaging

Taking a quick photo

1 Press Camera key to open the

viewfinder.

2 Holding the phone horizontally,

point the lens towards the subject

of the photo.

3 Press Camera key to take a photo.

After you’ve taken your photo

Your captured photo will appear on

the screen. The following options are

available:

Back - Go back to previous menu.

Album - View the pictures you have

taken in your album.

Send - Send the photo as MMS,

email or via Bluetooth.

New image - Take another photo

straight away. Your current photo will

be saved.

Use as - Set the image you have just

taken as wallpaper, a contact image

or in your start-up/shut down screen.

(Contact image can only be added

to contacts saved to your phone, not

your USIM card.)

Delete - Delete the photo you

have just taken. The viewfinder will

reappear.

Options - You can change the name

of the image or edit the image file.

Using the quick settings

From the viewfinder use navigation

keys and select the options you

would like to use.

Album - Choose to look at the other

images in your album.

Video - Choose to switch from

camera to video camera mode.

Capture - Allows you to take a

picture.

Brightness - Set the brightness of

the image in the viewfinder of the

camera.

Zoom - Adjust the zoom using the

volume key on the left side of your

phone. The zoom function is only

available when the image size is set

to 640x480 or below.

Camera

LG GM310G | User Guide42

Camera

Using the advanced settings

From the viewfinder select Settings

to open all the advanced settings

options. Use the navigation key to

navigate through the options.

Image size - Change the size of the

photo.

Colour effect - Choose a colour tone

to apply to the photo you’re taking.

White balance - The white balance

ensures that any white in your photo

is realistic. In order for your camera

to correctly adjust the white balance

you may need to determine the

light conditions. Choose from Auto,

Incandescent, Sunny, Fluorescent

or Cloudy.

Night mode - You can take better

pictures at night by selecting On.

Timer - The self-timer allows you to

set a delay after the capture button

is pressed. Choose from 3 seconds,

5 seconds or 10 seconds. Great

for a group photo that you want to

be part of.

Shot mode - Choose from

Normal or Burst shot. Burst shot

lets you to take up to 3, 6 or 9

shots automatically in very quick

succession, great for taking photos of

moving objects or at sporting events.

Image quality - Controls the quality

of image. The finer the quality the

sharper a photo will be, but the file

size will increase. This means you’ll

be able to store fewer photos in your

memory.

Memory in use - Choose whether

to save your photos to the handset

memory or to the external memory.

Hide icons - Hide the icons to the

side of the viewfinder.

Shutter sound - Select one of three

different shutter sounds.

Note: Always press Select after

selecting a new setting to implement

the changes you’ve made. The

settings menu will automatically

close, ready for you to take your

picture.

Adjusting the brightness

Contrast defines the difference

between light and dark in an image. A

low contrast image will appear foggy,

whereas a high contrast image will

appear much sharper.

1 Select Brightness in the quick

settings.

2 Slide the contrast indicator along

the bar, towards “

” for a lower

contrast, hazier image or towards

“+” for a higher contrast, sharper

image.

Changing the image size

The more pixels, the larger the file

size, which in turn means they will

take up more of your memory. If you

want to fit more pictures on your

phone or memory card you can alter

the number of pixels to make the file

size smaller.

1 Select Image size in Settings.

2 Select a pixel value from the

numerical options: 2048x1536,

1600x1200, 1280x960, 640x480,

320x240.

Viewing your saved photos

1 You can access your saved photos

from within the camera mode by

selecting Album. Your album will

appear on the screen.

2 Highlight the photo you want to

view to bring it to the front of the

album.

3 Select the photo to open it fully.

LG GM310G | User Guide44

Shooting a quick video

1 Press and hold Camera key to

open the viewfinder.

2 Focus the camera on what to

record.

3 Press Camera key once to start

recording.

4 REC will appear at the bottom of

the viewfinder. Press Camera key

again to stop recording.

After you’ve shot your video

A still image representing your

captured video will appear on screen.

The following options are available:

Back - Go back to previous menu.

Album - Press to look at the other

video clips in your album. Your

current video clip will be saved.

Play - Press to play the video you

have just recorded.

New video - Press to shoot another

video straight away. Your current video

will be saved.

Send - Send the video as MMS, as

an email or via Bluetooth.

Delete - Delete the video you have

just recorded. The viewfinder will

reappear.

Options - You can change the name

of the video clip.

Using the quick settings

From the viewfinder use navigation

keys and select the options you

would like to use.

Album - Choose to look at the other

videos in your album.

Camera - Choose to switch from

video camera to camera mode.

Rec - Allows you to record a video.

Brightness - Set the brightness in

the viewfinder of the video camera.

Using the advanced settings

From the viewfinder select Settings

to open all the advanced settings

options. Use the navigation key to

navigate through the options.

Video camera

Size - Change the size of the video.

Colour effect - Choose an effect

tone to apply to the video you’re

recording.

White balance - The white balance

ensures that any white in your photos

is realistic. In order for your camera

to correctly adjust the white balance

you may need to determine the

light conditions. Choose from Auto,

Incandescent, Sunny, Fluorescent

or Cloudy.

Quality - Controls the quality of

video.

Duration - Select the maximum

length of the recording.

Memory in use - Choose whether

to save your videos to the handset

memory or to the external memory.

Hide icons - Hide the icons to the

side of the viewfinder.

Voice - Choose Mute to record a

video without sound.

Note: Always press Select after

selecting a new setting to implement

the changes you’ve made.

Watching your saved videos

1 You can access your saved videos

from within the video camera

mode by selecting Album. Your

album will appear on screen.

2 Highlight the video you want to

view to bring it to the front of the

album.

3 Select the video to open it fully.

LG GM310G | User Guide46

MP3 Player

Your LG GM310G has a built-in

music player so you can play all your

favourite music.

Note:

• Before using music player, you will

need to transfer music file onto your

phone.

• If you transfer playlists (songs

you’ve organized into lists) to your

phone by using the Music Sync

application, you can also browse for

songs in playlists of Music Tea, Mix

& Match and More like this.

• Music player supports codec types

as follows: MP3, WMA, AAC, M4A,

and RA. Music player does not

necessarily support all features and

variations of file formats.

Music recognition technology

and related data are provided by

Gracenote

. Gracenote is the industry

standard in music recognition

technology and related content

delivery. For more information, visit

www.gracenote.com.

CD and music-related data from

2000-2007 Gracenote. Gracenote

2007 Gracenote. This product

and service may practice one or

more of the following U.S. Patents:

#5,987,525; #6,061,680;

#6,154,773, #6,161,132,

#6,230,192, #6,230,207,

#6,240,459, #6,304,523,

#6,330,593, #7,167,857 and

other patents issued or pending.

Gracenote and CDDB are

registered trademarks of

Gracenote. The Gracenote

logo and logotype, and the

“Powered by Gracenote” logo are

trademarks of Gracenote.

MP3 Player

To access the music player, press

Menu and select MP3 Player. Or,

you can access the music player by

lightly pressing the music player key

on the right hand side of the handset.

From here you can access to:

Now playing - Only appears when

music is playing. When you select this,

you can go back to the on-going player.

All tracks - Contains all of the songs

you have on your phone.

MusicTea™ - MusicTea™ contains

9 tea bags which consists of music

files with different characteristics.

Each tea bag is matched with a

music genre. By using More Like

This™ feature of Music Sync, you

can organize songs into each tea bag.

Mix&Match™ - Mix&Match™

contains 6 categories which let you

enjoy the variety of playlists according

to the activities and situations.

You can make and manage your

playlist with songs to listen to while

exercising, or playlist with songs for

a particular mood such as romantic.

By using More Like This™ feature of

Music Sync, you can organize songs

into each category.

My playlists -

Contains any playlists

you have created as well as

Most

played

Top rated

More Like This™ allows you to

generate one-press automatic playlists

composed of USIMilar songs, according

to the title of the album or artist, or the

mood of the music. You can enjoy and

manage these playlists as you like.

Creating a playlist

1 Press Menu and select MP3

Player.

2 Choose Playlist.

3 Press Options and select Add

new playlist, enter the playlist

name and press Save.

4 The new playlist folder will show.

Select all of the songs that you

would like to include in your

playlist by scrolling to them and

pressing ; a tick will show

next to the track name. If you

accidentally add a song you don’t

want, select it and press again

to untick it.

5 Press Done to store the playlist.

Search for song information with

MusicID™

With MusicID, you can find out

information of song you want to

know. Choose the following features

of MusicID:

TagMusic™ - When you hear a song

you like but you don’t know what it’s

called, select TagMusic™ feature

and record a few second of the audio

from an external music source. After

complete the record, it automatically

links to the MusicID recognition

server. Once a song has been

identified through MusicID recognition

service, you will receive the relevant

information of the song.

TagRadio - TagRadio is a feature

that helps you find information about

the unknown song you hear on the

built-in FM radio. During listening to

the FM radio, you can select ‘Record’

to record a short music clip and save

it. If you have radio recording files,

select file and send it to the MusicID

recognition server. Once a song has

been identified through MusicID

recognition service, you will receive

the relevant information of the song.

TagSong - With TagSong feature,

you can add the information on ID3

tag of MP3 files you have. If you

send the MP3 file to the MusicID

recognition server, you will receive

the information of MP3 file such as

the name of a song, artist, album

and genre, etc, if available. It will

provide many benefits to you to

better manage and enjoy your music

collections.

Note:

- For best results, please use

MusicID™ feature in a quiet

environment.

- An additional cost is incurred when

connecting to the service and

transmitting data. Check your data

charges with your service provider.

- The music record as a WAV format

and not saved to your phone.

- If music identification is impossible,

ask you whether to retry or not.

- The results of TagMusic/TagRadio

will be saved on Tag-history if you

select ‘Save’ option after received

the result.

Note: As a result of the Digital Rights

Management (DRM) system, some

of the media items you download

from the Internet or receive by MMS

may have a “Get License” menu to

access them. You can acquire the

key to purchase the right from the

website which owns the rights to the

contents. Music is copyright protected

in international treaties and national

to obtain permission or a licence to

reproduce or copy music. In some

countries national law prohibits

private copying of copyrighted

material. Please check the national

legislation of the applicable country

concerning the use of such material.

LG GM310G | User Guide52

Using the FM radio

Your LG GM310G has an FM radio

feature so you can tune into your

favourite stations to listen on the

move.

Note: You will need to insert your

headset in order to listen to the radio.

Insert the plug into the Headset

connector.

Searching for stations

You can tune radio stations into your

phone by searching for them either

manually or automatically. They will

then be saved to specific channel

numbers so you don’t have to keep

re-tuning.

To auto tune:

1 Press Menu and select

Multimedia, then choose FM

radio.

2 Select Option and choose Auto

scan then select Yes.

3 Available radio stations will be

automatically found and allocated

to a channel in your phone.

To manually tune:

1 Press Menu and select

Multimedia, then choose FM

radio.

2 To enter your station, you can use

the navigation key to search or you

can enter the frequency using the

keypad, then select Set.

3 Select a channel number that

you want to save a station to and

choose Select.

Note: You can also edit the stations

you have saved in a channel number.

TIP! To improve the reception

extend the headset cord, which

functions as the radio antenna.

Reset all channels

1 Press Menu and select

Multimedia, then choose FM

radio.

Multimedia

2 Select Options and select Reset

all channels. Choose Yes to

confirm the reset. Each channel

will return to the starting 87.5Mhz

frequency.

Listening to the radio

1 Press Menu and select

Multimedia, then choose FM

radio.

2 Select the channel number of the

station you would like to listen to.

Note: You can listen to the radio

via built-in speaker. Press Options,

select Listen via speaker.

Recording your radio

During listening to the FM radio, you

can select Record to record a short

clip and save it. You can listen to

all of the radio recordings you have

saved by selecting Options and Go

to Radio recordings. You can also

view the saved recordings in the My

stuff> My memory card > Sounds

> Radio recordings folder.

Note:

- If you do not have a memory card

inserted, you will not be able to

select Record option in FM Radio

menu.

- Please note, if you do not have

enough space in your internal

memory (smaller than 10 MB), you

can not record a clip and save file.

You can record a radio clip when

you have enough spaces in both

internal memory and external

memory.

TIP! If you have saved radio

recordings in your memory card, you

can select the clip and set it as a

ringtone. You can also select the part

of clip you want to use and create a

new ringtone. Select a radio recording

ﬁle and choose Options > File >

Edit. Use Cut and save a ﬁle to My

stuff > My sounds folder.

Using the Voice recorder

Use your Voice recorder to record

voice memos or other sounds.

LG GM310G | User Guide54

Recording your voice memo

1 Press Menu and select

Multimedia, then choose Voice

recorder.

2 Press the center soft key to begin

recording.

3 Choose Stop to end the recording.

4 Press Options and select Play to

listen to the recording.

Note: You can listen to all of the

voice recordings you have saved by

selecting Options and Go to Voice

recordings.

Sending a voice recording

1 Once you have finished recording,

select Options.

2 Select Send and choose from

Message, Email or Bluetooth. If

you choose Message or Email,

the recording will be added to the

message and you can write and

send it as normal. If you choose

Bluetooth, you will be prompted to

turn Bluetooth on.

Multimedia

You can store any multimedia files

on your phone’s memory in My stuff

so that you have easy access to all

of your pictures, sounds, videos and

games. You can also save your files

to a memory card. The advantage

of using a memory card is that you

can free up space on your phone’s

memory.

Images

My images contains a list of pictures

including default images pre-loaded

onto your phone, images downloaded

by you and images taken on your

phone’s camera.

Sending a photo

1 Press Menu and select My stuff

then choose My images.

2 Select the photo you want to send

and press Options.

3 Select Send and choose from

Message, Email or Bluetooth.

4 If you choose Message or Email,

your photo will be attached to the

message and you can write and

send the message as normal. If

you choose Bluetooth, you will be

prompted to turn Bluetooth on and

your phone will search for a device

to send the picture to.

Using an image

You can choose images to use as

wallpapers, start up/shut down

images or even to identify a caller.

1 Press Menu and select My stuff

then choose My images.

2 Select the image and choose

Options.

3 Select Use as and choose from:

Wallpaper - Set a wallpaper for

the home screen.

Contacts image - Allocate an

image to a particular person in your

contacts list so that the picture

shows when they call you.

My stuff

LG GM310G | User Guide56

Start-up - Set an image to appear

when you switch the phone on.

Shut down - Set an image to

appear when you switch the phone

off.

Organising your images

1 Press Menu and select My stuff,

then choose My images.

2 Select Options and choose Sort

by.

3 Choose from Date, Type or Name.

Deleting an image

1 Press Menu and select My stuff,

then My images.

2 Select the image you want to

delete and press Options.

3 Select Delete and choose Yes to

confirm.

TIP! To quickly delete any ﬁle

in My ﬁles, highlight it with the cursor

and press the C key.

Moving or copying an image

You can move or copy an image

between the phone memory and the

memory card. You might want to do

this to either free up some space

in one of the memory banks or to

safeguard your images from being lost.

1 Press Menu and select My stuff

then choose My images.

2 Select an image and press

Options.

3 Select Move or Copy.

Marking and unmarking images

If you want to move, copy, send or

delete several images at once, you

first need to identify them by marking

them with a tick.

1 Press Menu and select My stuff

then choose My images.

2 Select Options and choose Mark/

Unmark.

3 A box will appear to the left of each

image. If you select an image, a tick

will appear in the box marking it.

My stuff

4 To unmark an image, select the

image again so that the tick

disappears from the box.

5 Once you have marked all of the

appropriate images, choose one of

the options to apply to all of them.

Checking your memory status

You can check to see how much of

your memory you have used and how

much you have remaining.

1 Press Menu and select My stuff,

then choose My images.

2 Select Options and choose

Memory info.

3 Choose Handset memory or

External memory.

NOTE: If you do not have a memory

card inserted, you will not be able to

select External memory.

Sounds

The My sounds folder contains the

Default sounds and Voice recordings.

Using a sound

1 Press Menu and select My stuff,

then choose My sounds.

2 Select Default sounds or Voice

recordings.

3 Select a sound and press Play to

listen to it.

4 Select Options and choose Use

as.

5 Choose from Voice ringtone,

Message tone, Start-up sound

or Shut down sound.

Videos

The My videos folder shows the list

of downloaded videos and videos you

have recorded on your phone.

Watching a video

1 Press Menu and select My stuff

then choose My videos.

2 Select a video and press Play.

LG GM310G | User Guide58

Sending a video clip

1 Press Menu and select My stuff

then choose My videos.

2 Select a video and choose

Options.

3 Select Send and choose from

Message, Email or Bluetooth.

4 If you choose Message or Email,

your video clip will be attached to

the message and you can write

and send the message as normal.

If you choose Bluetooth, you will

be prompted to turn Bluetooth on

and your phone will search for a

device to send the video to.

Note: The video may need to be

resized before it can be sent by MMS.

Some videos may be too large to

send by MMS at all.

Games and Applications

You can download games and

applications to your phone to keep

you amused when you have time to

spare.

If you download a game from the

network, you will need to install the

downloaded game in your phone

before enjoying the game.

Playing a game

1 Press Menu and select My stuff,

then choose My games & apps.

2 Select Games menu.

3 Select a game and press Launch.

Using the games options menu

From the Games and Applications

folders, the following options are

available:

Create new folder – Create a folder

within the games and applications

menu.

Sort by - Sort the games and

applications by Date, Size or Name.

Memory manager - View the

memory status.

My stuff

Flash contents

The Flash contents folder contains

all of your default and downloaded

flash contents.

Others

The Others folder is used to store

files which are not pictures, sounds,

videos, games or applications.

My memory card

If you purchase an optional external

microSD memory card, you can

manage more content.

Installing a Java game &

application

Depending on the service provider, all

Java based programs such as Java

games can be downloaded and run

on your phone. You can transfer Java

program files from a compatible PC

to the memory in your phone using

the Bluetooth, USB mass storage or

external memory. The Java program

files are in .jad or .jar format.

If you save the Java program files

in your phone, you should install the

files before using a Java game or

application first.

To install a Java game & application:

1 Press Menu and select My

stuff, then choose Others or My

memory card (If external memory

is inserted).

2 Select the file (*.jad or *.jar) you

want to install and press Install.

Note: The .jad file should contain

its own .jar file.

3 Once installed, the Java program

can be viewed in the games or

Applications menu where you can

select, execute or delete.

TIP! You can also download

Java MIDlet in your phone by using

the WAP (Wireless Application

Protocol) services. Please note that

additional costs may be incurred

when using online services.

LG GM310G | User Guide60

Games & Apps

Your GM310G comes with preloaded

games to keep you amused when

you have time to spare. If you choose

to download any additional games or

applications they will be saved into

this folder.

Note: An additional cost is incurred

when connecting to this service.

Check your data charges with your

network provider.

Playing a game

1 Press Menu and select Games &

Apps.

2 Select My games & apps and

choose Games.

3 Choose the game you want to play

and select Launch.

Viewing applications

You can manage the Java

applications installed in your phone

by using the Applications menu.

You can also delete downloaded

applications.

1 Press Menu and select Games &

Apps.

2 Select My games & apps and

choose Applications.

3 View and manage any applications

you have.

Changing the network profile

To download a game, you can set the

value to connect to the network using

Settings.

1 Press Menu and select Games &

Apps.

2 Select Settings.

3 From here you can:

Profiles - You can see profile and

add new profile.

Certificates list - You can see

the certification list for using Java

application.

Games & Apps

Adding an event to your

calendar

1 Press Menu and select Organiser,

then choose Calendar.

2 Select the date you would like to

add an event to. You can choose a

date either by scrolling to it using

the navigation keys or by selecting

Options and Go to date in order

to enter a date.

3 Select Add new and scroll down

to enter the time you would like

your event to begin. Scroll down

and enter the end time of your

event.

4 Enter a Subject for the event.

Use the keypad to type letters and

numbers.

5 Scroll down again and choose

whether you would like to set an

Alarm for the event. Scroll left or

right to see the available options.

You can set the alarm to go off

at the starting time of the event

or at a set period of time before

the event starts to remind you the

event is coming up.

6 Scroll down once more to select

whether the event is occurring

Not repeated or repeated at

Daily, Weekly, Monthly or

Annually intervals. Also you can

choose User setting. If the event

is repeated, you can also scroll

down to enter an Expiration date

for when the events will stop

completely.

7 Select Done and your event will be

saved in the calendar. A square

cursor will mark the days of any

saved events.

Adding an item to your to do list

1 Press Menu and choose

Organiser.

2 Select To do and select Add.

3 Set the date for the to do item,

add notes and select a priority

level: High, Medium or Low.

4 Save your to do list item by

selecting Done.

TIP! You can edit an item by selecting

it, pressing Options and Edit. Conﬁrm

your amends by selecting Save.

Organiser & Tools

LG GM310G | User Guide62

Adding a memo

1 Press Menu and select Organiser,

then Memo.

2 Select Add and type your memo.

3 Select Save.

4 Your memo will appear on screen

the next time you open the memo

application.

Secret memo

You can write the private memo to

protect your privacy. You enter the

security code to use this menu.

Date finder

Date finder is a handy tool to help you

calculate what the date will be after a

certain amount of days has passed.

Settings

Calendar - You can set the

configurations to view the calendar.

Send all shedules & to do via

Bluetooth - You can send all the data

in your calendar and/or to do list from

your phone to other phones by using

Bluetooth.

Backup calendar & To do - You

can create the backup files of the

calendar or to do list saved in the

phone when you insert an external

memory.

Restore calendar & To do - You can

reset the backup files of calendar or

tasks when you insert an external

memory.

Memory info. - You can view the

information of available memory

regarding Calendar, Tasks, Memo and

Secret memo.

Clear all - You can delete all data

regarding Calendar, Tasks, Memo and

Secret memo.

Quick menu

You can specify functions to save

in the Quick menu. If you save

frequently used functions in the Quick

menu, you can quickly use them by

pressing the corresponding key.

Organiser & Tools

Setting your alarm

1 Press Menu and select Tools,

then choose Alarms.

2 Press Options and select Add

new.

3 Scroll down and enter the time you

would like the alarm to sound at.

4 Choose the repeat type to indicate

whether you would like your alarm

to sound Not repeated, Daily,

Mon - Fri, Mon - Sat, Except

holiday, or Choose weekday.

5 Scroll down and choose whether

you would like the alarm to Ring,

Vibration, Ring&vibration or

Follow profile.

6 Scroll down to choose the alarm

tone. Press Menu and choose a

sound from Voice recordings or

Default sounds.

7 Scroll down and enter a name for

the alarm or keep the suggested

name.

8 Select Done.

Using your calculator

1 Press Menu and select Tools,

then choose Calculator.

2 Press the numeric keys to input

numbers.

3 For simple calculations, select the

function you require (+, –, ×, ÷)

using the navigation keys followed

by =.

4 For more complex calculations,

select Options to choose a

command.

5 Select C to clear the screen and

start a new calculation.

Using the stopwatch

1 Press Menu and select Tools,

then choose Stopwatch.

2 Select Start to begin the timer.

3 Choose Lap if want to record a

lap time. Up to 20 lap times can

be saved.

4 Select Stop to end the timer.

LG GM310G | User Guide64

5 Choose Resume to restart the

stopwatch at the time you stopped

it at or select Reset to return to

zero.

Converting a unit

1 Press Menu and select Tools,

then choose Converter.

2 Choose whether you would like

to convert Currency, Surface,

Length, Weight, Temperature,

Volume or Velocity.

3 Scroll left and right to select a unit,

then scroll down and enter the unit

quantity.

4 Scroll down to the unit conversion

box and choose the unit

measurement you want to convert

into. The conversion will show

automatically in the line below.

Note: For Currency convert, you

need to set ‘Rate’ according to

current Exchange rate first.

Adding a city to your World time

1 Press Menu and select Tools,

then choose World time.

2 To find out the time of specific

city, press Options and select

Add city.

3 Scroll down the list or enter the

first letter of the city. Also you can

select Map and choose a city.

4 Press Select.

TIP! If you are abroad, you can

change your time zone from World

time by selecting Options, followed

by Change current city. Choose your

required city as above.

Organiser & Tools

With a browser at the tip of your

fingers, you can get up-to-date

news and weather forecasts as well

as information on sports or traffic

whenever you need it. In addition, the

browser allows you to download the

latest music, ringtones, wallpapers

and games.

Accessing the web

1 Press Menu and choose Browser.

2 To access the browser homepage

directly, select Home.

Alternatively, select Enter address

and type in your desired URL,

followed by Open.

NOTE: An additional cost is incurred

when connecting to this service and

downloading content. Check your

data charges with your network

provider.

Yahoo

You can access Yahoo Mobile Internet

Service. To access Yahoo services,

press Menu and select Yahoo.

Note: You may be unable to access

Yahoo in some countries. This is

dependent on network services.

Adding and accessing your

bookmarks

For easy and fast access to your

favourite websites, you can add

bookmarks and save web pages.

1 Press Menu and choose Browser.

2 Select Bookmarks. A list of your

bookmarks will appear on the

screen.

3 To create a new folder, select

Options and choose Create new

folder. Enter the name of your

bookmark folder.

4 To add a new bookmark, select

Options and press Add new.

Enter a name for your bookmark

followed by the URL.

5 Select Done. Your bookmark

will be displayed in the list of

bookmarks.

6 To access the bookmark, simply

scroll to it and select Open.

Browser

LG GM310G | User Guide66

Saving a page

1 Access your required webpage as

described above.

2 Select Options and Save items,

then choose Save this page.

3 Enter a name for the webpage so

you can easily recognise it.

4 Select Save.

Accessing a saved page

1 Press Menu and choose Browser.

2 Select Saved pages.

3 Select Open to connect to the

saved page.

Viewing your browser history

1 Press Menu and choose Browser,

then select History.

2 A list of web page titles you have

accessed recently will be displayed.

3 To access one of these pages,

simply select the required page

and press Open.

Using RSS reader

RSS (Really simply Syndication) is a

family of web feed formats used to

publish frequently updated content

such as blog entries, news headlines

or podcasts. An RSS document,

which is called a feed, web feed, or

channel, contains either a summary

of content from an associated web

site or the full text.

Changing the web browser

settings

1 Press Menu and choose Browser

then select Settings.

2 You can choose to edit Profiles,

Appearance settings, Cache,

Cookies, Security, or Reset

Settings.

3 Once you have changed your

settings, press Select.

Browser

Changing your connectivity

settings

Your connectivity settings have

already been set up by your network

operator, so you can enjoy your new

phone straightaway. If you want to

change any settings, use this menu.

Press Menu and select Settings

then choose Connectivity. Your

options are:

Bluetooth - Set up your GM310G for

Bluetooth use. You can adapt your

visibility to other devices or search

through devices your phone is paired

with.

USB connection mode - You can

select the USB connection mode on

your phone for several uses.

Changing your Bluetooth settings

1 Press Menu and select Settings

then choose Connectivity.

2 Choose Bluetooth then Settings.

Make your changes to:

My device visibility - Set Visible

or Visible for 1 min so that other

devices can detect your phone when

they are searching for a Bluetooth

device. If you select Hidden, other

devices will not be able to detect your

phone when they are searching for a

Bluetooth device.

My device name -

You can name or

rename your phone as it will appear on

other devices. Your phone’s name will

be shown on other devices only when

My device visibility is set to Visible.

Supported services - You can

view the list of devices such as

headsets and handsfree supported by

Bluetooth enabled phone.

My address - Check your Bluetooth

address here.

Note:

To improve security, we

recommend that once you have

configured or paired with a device,

Visibility be set to Hidden. For incoming

connections, regardless of whether or

not the other device has been paired

with your phone, you can choose to

accept or reject the connection.

Connectivity

LG GM310G | User Guide68

Pairing with another Bluetooth

device

By pairing your GM310G and another

device, you can set up a passcode

protected connection. This means

your pairing is more secure.

1 Check your Bluetooth is Turn on

and Visible. You can change your

visibility in the Settings menu, by

selecting My device visibility,

then Visible.

2 From Bluetooth, choose Turn on

and select Search new device.

3 Your GM310G will search for

devices. When the search is

completed Add and Refresh will

appear on screen.

4 Choose the device you want to

pair with, select Add and enter a

passcode then choose OK.

5 Your phone will then connect to the

other device, on which you should

enter the same passcode.

6 Your passcode protected Bluetooth

connection is now ready.

Using a Bluetooth headset

1 Check your Bluetooth is Turn on

and Visible.

2 Follow the instructions that came

with your headset to place it

in pairing mode and pair your

devices.

3 Your GM310G will automatically

connect to your Bluetooth headset

and switch to headset profile.

Sending and receiving your files

using Bluetooth

Bluetooth is a great way to send and

receive files as no wires are needed

and connection is quick and easy.

You can also connect to a Bluetooth

headset to make and receive calls.

Before you can start sharing files

using Bluetooth, you will need to pair

your phone with another Bluetooth

device. For information on pairing

devices, see Pairing with another

Bluetooth device.

To switch Bluetooth on:

Connectivity

1 Press Menu and select Settings.

Choose Connectivity then select

Bluetooth.

2 Select Turn on.

3 Select Turn off to switch Bluetooth

off.

To send a file:

1 Open the file you want to send,

typically this will be a photo, video

or music file.

2 Select Options and choose Send,

then Bluetooth.

3 Select Yes to turn Bluetooth on if it

is not already activated.

4 Your GM310G will automatically

search for other Bluetooth enabled

devices within range.

5 Choose the device you want to

send the file to and select OK.

To receive a file:

1 To receive files, your Bluetooth

must be both Turn on and Visible.

2 A message will prompt you to

accept the file from the sender.

Select Yes to receive the file.

TIP! Keep an eye on the progress bar

to make sure your ﬁle is sent.

Note: The Bluetooth® word mark and

logos are owned by the Bluetooth

SIG, Inc. and any use of such marks

by LG Electronics is under licence.

Other trademarks and trade names

are those of their respective owners.

Use your phone as a modem

Just plug in the USB cable, then use

your phone to make a fast internet

connection.

WARNING: First make sure you

have a suitable tariff! Otherwise if

you download large amounts of data

– such as music or video – you may

incur high charges.

1 Connect the USB cable to your

phone and your PC.

2 Select PC Internet from the popup

menu in your phone.

LG GM310G | User Guide70

3 Wait until pop up open up on your

PC and then select Start to install

the Via the phone software, called Via

the phone and its drivers on your PC,

then follow the screen instructions.

4 You can now use your web

browser. When you’ve finished,

click Disconnect.

5 To connect to the internet the next

time, just plug in the cable, the

software will start automatically,

and you’ll be ready to go.

Use your phone as a mass

storage device

Your phone can only be used as a

mass storage device if you have a

memory card inserted.

1 Connect the USB cable to your

phone and your PC.

2 Select Mass storage from the

popup menu in your phone.

3 Connect your phone to your PC. Your

phone will read: Connecting as Mass

Storage… followed by “Connected

as Mass Storage Mode”.

Do not disconnect during transfer.

4 All of your phone files will

automatically be stored onto your

PC hard drive.

Note: Mass storage backs up

content saved on your memory card

only, not your handset memory. To

transfer the contents of your handset

memory (e.g. contacts) you’ll need to

synchronise using PC Sync.

Synchronise your phone with

your PC

You can synchronise your phone

with your PC to make sure all your

important details and dates match,

but also to backup your files to put

your mind at ease.

Installing LG PC Suite on your

computer

1 Go to www.lgmobile.com and

choose your region and then your

country.

2 Choose Products menu, select

Manual & Software and click

Go to Manual & S/W download

section. Click Yes and LG PC Suite

installer will then appear.

Connectivity

3 Select the language you would like

the installer to run in and click OK.

4 Follow the instructions on screen

to complete the LG PC Suite

Installer wizard.

5 Once installation is complete, the

LG PC Suite icon will appear on

your desktop.

Connecting your phone and PC

1 Connect the USB cable to your

phone and your PC.

2 Select PC suite from the popup

menu in your phone.

3 Double click on the LG PC Suite

icon on your desktop.

4 Click on Connection Wizard, then

USB.

5 Click on Next, then Next again,

then choose Finish. Your phone

and PC are now connected.

Backing up and restoring your

phone’s information

1 Connect the USB cable to your

phone and your PC.

2 Select the PC Suite from the

popup menu in your phone.

3 Click on the Backup icon, and

select Backup or Restore.

4 Mark the contents you would

like to back up or restore. Select

the location you would like to

backup information to, or restore

information from. Click OK.

5 Your information will be backed up.

Viewing your phone files on

your PC

1 Connect the USB cable to your

phone and your PC.

2 Select the PC Suite from the

popup menu in your phone.

3 Click on the Contents icon.

LG GM310G | User Guide72

4 All of the documents, flash

contents, images, sounds and

videos you have saved onto your

phone will be displayed on the

screen in the LG Phone folder.

TIP! Viewing the contents of your

phone on your PC helps you to

arrange ﬁles, organise documents and

remove contents you no longer need.

Synchronising your contacts

1 Connect the USB cable to your

phone and your PC.

2 Select the PC Suite from the

popup menu in your phone.

3 Click on the Contacts icon.

Your PC will now import and

display all contacts saved to your

USIM card and handset.

4 Select To Phone. Your PC will

export your contacts to your

handset.

5 Click on File and select Save. You

can now select where you would

like to save your contacts to.

Note: To backup contacts saved to

your USIM card, click on the USIM

card folder on the left side of your PC

screen. Right-click your contact then

Select All. Right-click your contact

again and select Copy to Phone

Memory. Now click on the Handset

folder on the left of your screen and

all your numbers will be displayed.

Synchronising your messages

1 Connect the USB cable to your

phone and your PC.

2 Select the PC Suite from the

popup menu in your phone.

3 Click on the Messages icon.

4 All of your phone messages will

be displayed in folders on your

screen.

5 Use the tool bar at the top of

your screen to edit and rearrange

messages.

Connectivity

Adding music to your handset

Before you get started

To transfer music from your PC

to your phone, you will need the

following:

• Microsoft Windows XP or Vista.

• Windows Media Player 10 or above

• USB cable

• MicroSD card (If you wish to use

external memory as the music

storage.)

Transferring music using Windows

Media Player

1 Connect the USB cable to your

phone and your PC.

2 Select Music sync from the popup

menu in your phone.

When you try to connect handset

on your PC, your handset will read:

Music Sync... followed by “Disconnect

cable to stop Music Sync.”

4 On the PC, you will be prompted

to launch your preferred music

management software.

5 Select the Window Media Player.

6 Go to the Sync tab, then drag

and drop the music you wish to

transfer to your handset into the

‘Sync List’ pane.

7 Click on Start Sync icon. This step

begins the transfer process.

WARNING: Do not disconnect

phone while the transfer is in progress.

Note: Music sync is available for only

music contents.

LG GM310G | User Guide74

Changing your profiles

1 Press Menu and select Settings.

2 Select Profiles and then choose

the profile you want to edit.

3 Select Options and choose Edit.

4 You can change all of the tones,

its volumes and alert options from

here.

Using flight mode

To turn on flight mode,, press

Menu and then select Settings

and Profiles. Select Flight mode to

activate. Flight mode will not allow

you to make calls, connect to the

internet or send message.

Changing your phone settings

1 Press Menu and select Settings.

2 Select Phone and choose from the

list below.

Auto key lock - Choose a duration

for locking the key automatically.

Touchpad vibration - Change the

setting of touchpad to a vibration.

Languages - Change the language

of for your GM310G’s display.

Power save - Choose to switch the

factory set power saving settings Off,

Night only or Always on.

Information - View the technical

information for your GM310G.

Changing your display settings

1 Press Menu and select Settings.

2 Select Screen and choose from:

Screen theme - Choose the theme

of your home screen or start-up/shut

down screen.

Menu style - Change the menu view

from List style or Grid style.

Dialling - Adjust the font style and

size for when you are dialling a phone

number.

Font - Adjust the font size.

Settings

Backlight - Choose how long the

backlight remains on. Also, use the

navigation keys to adjust the main

screen brightness.

TIP! The longer the backlight is on for,

the more battery power is used and

you may need to charge your phone

more often.

Handset theme - Quickly change the

whole look of your screen.

Greeting message - After selecting

On, you can write a welcome

message. The message will appear

on screen whenever you start-up the

phone.

Changing your date & time

1 Press Menu and select Settings.

2 Select Date & Time and choose

from the list below:

Time - You can enter the current

time. You can set the time format to

either 24 hours or 12 hours. You can

select a city as time zone.

Date - You can enter the current

date. You can set the date format

(YYYY/MM/DD, DD/MM/YYYY, MM/

DD/YYYY).

Auto update date/time - Select

On, and the phone will automatically

update the date and time.

Daylight saving - Select whether to

activate the daylight saving function

or not. You can set the summer time

difference of selected home city for 1

hour or 2 hours.

Changing your security settings

Change your security settings to keep

your GM310G and the important

information it holds protected.

1 Press Menu and select Settings.

2 Select Security and choose from

the list below:

PIN code request - Choose a PIN

code to be requested when you turn

your phone on.

LG GM310G | User Guide76

Handset lock - Choose a security

code to lock your phone When

switching on, If USIM changed or

Immediate.

Change codes - Change your PIN

code, PIN2 code or Security code.

Note: Security code

The security code protects the

unauthorized use of your phone.

The default security code is set

to ‘0000’ and the security code

is required to delete all phone

entries and to activate the Reset

settings menu. Also, the security

code is required to enable or

disable the phone lock function to

prevent unauthorized use of the

phone. The security code default

setting can be modified from the

Security > Change codes.

Viewing memory status

Your GM310G has three memories

available: the phone, the USIM card

and an external memory card (you

may need to purchase the memory

card separately).

You can use the memory manager to

determine how each memory is used

and see how much space is available.

Press Menu and select Settings,

choose Memory manager. You will

then see the current status of the

memories in your GM310G.

If you insert an external memory card

in your phone, you can also select

Primary storage settings then

choose the default location you prefer

items to be saved to.

Change your other settings

Network - You can set Select

network and Network mode

settings using this menu. Also you

can add a preferable network to be

connected to Preferred lists.

Settings

Internet profiles - This menu shows

the Internet profiles. You can create

new profiles, delete or edit them

using the Options menu. However,

you cannot delete or edit default

configurations.

Access points - This menu shows

the access points list. You can create

new profiles, delete or edit them by

using the Options menu. However,

you cannot delete or edit default

configurations.

Packet Data Conn. - If you select

the ‘When available’ option, your

phone is automatically registered to

a GPRS network when you switch

the phone on. If you select “When

needed”, the GPRS connection is

established for the duration of a WAP

or application connection.

Streaming settings

If you want to set different network

setting to play streaming content, you can

set different network settings by using

Streaming settings in Settings menu.

Resetting your phone

Use Reset settings in Settings

menu to reset all the settings to the

factory definitions.

You need the security code to activate

this function.

Software Upgrade

LG Mobile Phone Software

Upgrade Program

For more information on installing

and using this program, please visit

http://update.lgmobile.com.

This feature allows you to upgrade

your software to the latest version

quickly and conveniently on the

Internet without needing to visit our

service center.

As the mobile phone software

upgrade program requires the user’s

full attention for the duration of the

upgrade process, please be sure to

check any instructions and notes

that appear at each step before

proceeding.

LG GM310G | User Guide78

Settings

Please note that removing the

USB data communication cable or

batteries during the upgrade may

seriously damage your mobile phone.

As the manufacturer takes no

responsibility for loss of data

during the upgrade process, you

are advised to note down any

important information in advance for

safekeeping.

Network service Technical data

The wireless phone described in this

guide is approved for use on the GSM

900, DCS 1800, PCS 1900 and

W-CDMA networks.

A number of features included in this

guide are called Network Services.

These are special services that

you arrange through your wireless

service provider. Before you can take

advantage of any of these Network

Services, you must subscribe to them

through your service provider and

obtain instructions for their use from

your service provider.

General

Product name: GM310G

System: GSM 900 / DCS 1800 /

PCS 1900 / W-CDMA

Ambient Temperatures

Max : +55°C (discharging)

+45°C (charging)

Min : -10°C

LG GM310G | User Guide80

Trouble Shooting

This chapter lists some problems that you might encounter while using your

phone. Some problems require that you call your service provider, but most of

problems you encounter are easy to correct yourself.

Message Possible causes Possible Corrective measures

USIM error There is no USIM

card in the phone

or you may have

inserted it incorrectly.

Make sure that the USIM card is

correctly inserted.

connection

to the

network

Signal weak

Outside GSM network

Move higher to a window or open

space. Check service provider

coverage map.

Codes do

not match

When you want to

change a security code

you have to confirm the

new code by entering

it again. The two codes

that you have entered

do not match.

Contact your service provider.

Function

cannot be

set

Not supported by

service provider or

registration required

Contact your service provider.

Calls not

available

Dialling error

New USIM card inserted

Charge limit reached

New network not authorised. Check

for new restrictions. Contact service

provider or reset limit with PIN 2.

Phone

cannot be

switched on

On/Off key pressed

too briefly

Battery empty

Battery contacts dirty

Press On/Off key for at least two

seconds.

Charge battery. Check charging

indicator in the display.

Clean contacts.

Charging

error

Battery totally empty

Temperature out of

range

Contact problem

No mains voltage

Charger defective

Wrong charger

Battery defective

Charge battery.

Make sure the ambient

temperature is right, wait for a

while, and then charge again.

Check power supply and

connection to the phone. Check

the battery contacts, clean them if

necessary.

Plug in to a different socket or

check voltage.

If the charger does not warm up,

replace it.

Only use original LG accessories.

Replace battery.

Phone loses

network

Signal too weak Reconnection to another service

provider is automatic.

Number not

permitted

The fixed dial number

function is on.

Check settings.

LG GM310G | User Guide82

This application or device contains

software from Gracenote, Inc. of

Emeryville, California (“Gracenote”).

The software from Gracenote (the

“Gracenote Software”) enables this

application to perform disc and/or

file identification and obtain music-

related information, including name,

artist, track, and title information

(“Gracenote Data”) from online

servers or embedded databases

(collectively, “Gracenote Servers”) and

to perform other functions. You may

use Gracenote Data only by means

of the intended End-User functions of

this application or device.

You agree that you will use Gracenote

Data, the Gracenote Software, and

Gracenote Servers for your own

personal non-commercial use only.

You agree not to assign, copy,

transfer or transmit the Gracenote

Software or any Gracenote Data to

any third party. YOU AGREE NOT TO

USE OR EXPLOIT GRACENOTE DATA,

THE GRACENOTE SOFTWARE, OR

GRACENOTE SERVERS, EXCEPT AS

EXPRESSLY PERMITTED HEREIN.

You agree that your non-exclusive

license to use the Gracenote

Data, the Gracenote Software, and

Gracenote Servers will terminate

if you violate these restrictions. If

your license terminates, you agree

to cease any and all use of the

Gracenote Data, the Gracenote

Software, and Gracenote Servers.

Gracenote reserves all rights in

Gracenote Data, the Gracenote

Software, and the Gracenote Servers,

including all ownership rights. Under

no circumstances will Gracenote

become liable for any payment to

you for any information that you

provide. You agree that Gracenote,

Inc. may enforce its rights under this

Agreement against you directly in its

own name.

The Gracenote service uses a

unique identifier to track queries for

statistical purposes. The purpose of a

randomly assigned numeric identifier

is to allow the Gracenote service

to count queries without knowing

anything about who you are. For

more information, see the web page

for the Gracenote Privacy Policy for

the Gracenote service.

Gracenote® End User License Agreement

LG Electronics USA GM310G Cellular/ PCS WCDMA/ GSM/ GPRS/ EDGE Phone with Bluetooth User Manual

LG Electronics USA Cellular/ PCS WCDMA/ GSM/ GPRS/ EDGE Phone with Bluetooth Users Manual

Users Manual

Navigation menu

Namespaces

Views

Navigation