LG Electronics USA HBM560 Bluetooth Mono Headset User Manual Manual

LG Electronics USA Bluetooth Mono Headset Manual

Manual

FCC CONCERNS RF Exposure Statement: The antenna(s) used for this device must not be co-located or operating in conjunction with any other antenna or transmitter. Do not Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
The LG Bluetooth® headset HBM-560 is a light weight wireless Headset utilizing Bluetooth® technology. This product can be used as an audio accessory for devices supporting either the Headset or Handsfree Bluetooth® Profiles. ■ Included in package
■ Change direction
■ Charging - Remove the cover on the charging port and connect the charger. - When the charger is connected, with power on or off, the headset will turn off. While charging, the LED indicator will show a solid blue light. - The buttons will not function while the device is charging. - It takes 2 hours to fully charge the headset. - When charging is complete, the LED indicator will turn off. ■ Low battery - The LED indicator will blink blue when the battery power is low. - When the battery is not charged, the LED indicator will blink blue and then turn off. ■ Power on - Press and hold the PWR/END button for 2 seconds. ● The headset will turn on and a booting tone will play. ■ Power off - Press and hold the PWR/END button for at least 2 seconds. ● A shutdown tone will play, the Bluetooth® link will disconnect, and the headset will turn off.
■ Pairing - Prior to using the Headset for the first time, you must pair it with a Bluetooth-enabled handset. - Enter the pairing mode with pressing and holding the CALL button for 5 seconds. ● You will hear two short beeps and the LED indicator will show a solid blue light, when the device enters Pairing Mode. ▶Using your Handset, find the Bluetooth® Menu and "search for" or "add” new devices. ▶Select ”LG HBM-560” from the list of devices and pair it with your handset. ▶When asked for the Pass/PIN code during the pairing procedure, please enter “0000” (4Zeros). ● Once pairing has completed successfully, you will hear a beep. ▶After pairing successfully, be sure to “Connect” to the HBM-560. ● If you want to pair with other devices in the future, the headset must be placed in Pairing Mode. ● If the HBM-560 is in "Pairing Mode" for 3 minutes, without being paired to a device, the Headset will automatically turn off.
■ Auto Reconnect When the HBM-560 turns off accidentally or intentionally during connected condition, the headset and handset will disconnect. The Headset and handset will automatically reconnect without pairing when the HBM-560 turns on. HBM-560 will enter the pairing mode if there’s no device to connect (Easy Pairing) [ Out of range ] - When the HBM-560 and your handset are separated by a distance of 33 feet (10meters) or more, the headset and handset will disconnect. When the handset and HBM-560 are brought back within the required distance, the HBM-560 will automatically reconnect with the handset. - If the headset and handset do not automatically reconnect when they are back within the required range, briefly press the CALL button to reconnect manually. ■ Volume control - Briefly press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume. - There are eight levels of speaker volume. ■ Answering a call - When there is an incoming call, the Headset will ring. - Briefly press the CALL button to answer an incoming call.
Making a call - If you make a call from the Handset, the call will (subject to phone settings) transfer automatically to the Headset. If not automatically transferred, you can transfer the call manually by briefly pressing the CALL button on the HBM-560 (headset and handset must be paired). Voice dialing* - Briefly press the CALL button. (You will get the best results if you record the voice dialing tag through your Headset.) NOTE : If the Handset does not support the Voice Dial, the Headset will activate the last number redialing. Last number redial* - Press and hold the CALL button for 1second to activate "Last Number Redial". The headset will beep, and call the last number dialed. Ending a call - Briefly press the CALL button. Transferring a call* - While on a call on your handset, briefly press the CALL button on the HBM-560 to transfer the audio to the headset.(headset and handset must be paired). - And to transfer a call from the Headset to Handset, press and hold VOLUME UP button for 5 seconds.
Call waiting* - Answer a second call without hanging up the first call by pressing the CALL button for 1seconds. Press the CALL button for 1seconds to return to the original call. - Briefly press the CALL button to terminate the active call. Call reject* Activate call reject by pressing the CALL button for 1 second when receiving a call. * It is possible to use these functions only when your Handset supports them. For further information about using these features please consult your Handset's user manual.
Function HBM-560 Status Action Power on Power off Press the PWR/END button for at least 2 seconds Power off Power on Press the PWR/END button for at lea Volume Up Talking Briefly press the Volume Up button Volume Down Talking Briefly press the Volume Down button Transferring a call Talking - Handset to Headset Briefly press the CALL button - Headset to Handset Press and hold the VOLUME UP button for 5 seconds Answering a call Ringing Briefly press the CALL button Ending a call Talking Briefly press the CALL button Call waiting Talking Press the CALL button for 1 second Last number redialing Idle Press the CALL button for 1 second Voice dialing (Handset must support) Idle Briefly press the CALL button Call Reject Ringing Press the CALL button for 1 second Pairing mode Power Off or Idle Press the CALL button for 5 seconds
Function HBM-560 Status LED Status Power on The blue LED light flickers fast 4 times Power off The blue LED light flickers fast 4 times Pairing mode The blue LED light turn on Headset / Handsfree Profile Connected The blue LED light flickers twice every 5 seconds. Call connected The blue LED light flickers twice every 5 seconds. Operating Unintentional Link Loss (until the lost link is recovered) The blue LED light flickers once every 5 seconds. Charging The blue LED is turned on Charging Charging complete The blue LED is turned off
Does not turn on Check whether the battery Charge the battery. of the HBM- 560 is fully discharged. Charge the battery.Unable to communicate with the HBM-560 Check whether the Handset supports the Headset or Handsfree Bluetooth® Profiles. Determine whether your Handset supports the Headset, or Handsfree profiles. Check whether the battery of the HBM- 560 is low Charge the battery.Unable to pair the HBM-560 with the Bluetooth® device Check and make sure the Headset is on. Press the PWR/END button for at least 2 seconds to turn on the Headset. Check and make sure the Headset is placed in pairing mode. With the power off, press and hold the CALL button for at least 5 seconds to place the Headset in pairing mode. Low sound (speaker) Check the speaker volume Increase the volume level.
ITEM Description Bluetooth® Specification V2.0 (Handsfree / Headset profiles) + EDR Battery 3.7V, Li - Polymer Standby Time Up to 150Hrs Talk Time Up to 6Hrs Charging Time 2Hrs Operation Temperature -10 ℃~ 60℃ Dimension / Weight 18.4(W) x 43(L) x 25.6(H) / 11 g
1. Do not drop the unit from high places. 2. Do not modify, repair, or take apart. 3. Do not expose directly to water, alcohol. Benzene, etc. for cleaning. 4. Do not expose directly to flammables. 5. Do not place or keep the unit near flammables. 6. Keep unit away from humidity &dust. 7. Do not place the heavy objects on the unit. - Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. - There is a risk of explosion if the battery is replaced by on incorrect type. - Dispose of used batteries according to the instructions. - The ear loop is made of a durable plastic that does not break but bend. However, repetition of bending is not recommended.
FCC NOTICE TO USERS : This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE : To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device.
1. Radio frequency exposure This Bluetooth® Headset, HBM-560, is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth® equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to 2.4835 GHz. The output power of the radio transmitter is low, 0.001 watt. Your Bluetooth® Headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used any compatible LG Electronics mobile phone. 2. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. 3. Emergency calls IMPORTANT! This Bluetooth® Headset and the electronic device connected to the Headset operate using radio signals, cellular and landline networks as well as user- programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e.g. medical emergencies). Remember, in order to make or receive calls, the Headset and the electronic device
connected to the Headset must be switched on and in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/ or phone features are in use. Check with your local service provider. 4. Battery information A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +60�(+140�F) or under -20�(-4�F). For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10�(+50�F) and +45�(+113�F). 5. Recycling the battery in your Bluetooth® Headset The battery in your Bluetooth® Headset must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner removing battery will dispose of it according to local regulations. 6. Conditions - The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial
number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer. - If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics. - This Warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God or damage resulting from liquid. - This warranty does not cover product failures due to improper repair installations, modifications or service performed by a non- LG Electronics authorized person. - Tampering with any of the seals on the product will void the warranty. - THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW. �Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumer's statutory rights under applicable national legislation in force, nor the consumer's rights against the dealer arising from their sales/purchase contract.
Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact center to get further information.

Navigation menu