LG Electronics USA HBS750 BLUETOOTH STEREO HEADSET User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2681890
Application ID	nhKtlylDU7snohdYJxQHAg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	247.96kB (3099443 bits)
Date Submitted	2015-07-16 00:00:00
Date Available	2015-07-16 00:00:00
Creation Date	2015-07-07 15:03:07
Producing Software	nPDF, http://iblogbox.com/npdf
Document Lastmod	2015-07-07 15:03:07
Document Title	User Manual
Document Creator	nPDF, http://iblogbox.com/npdf

@LG
Life's Good
LG TONER".
HES-750 User Manual
BLUETOOTH® Stereo Headset
All rights reserved.
LG Electronics Inc.. 2014
Note: For the best performance and
to prevent any damage to, or misuse of the
HES—750. please read all of the information
carefully prior to using the HBS—750.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
0N3
Description Of parts
VOLUME DOWN Button VOLUME UP Button
CALL Button. _______
LED. Indicator
Microphone
Memory Flex Neck Strap
Power Switch """"
Charging
Port
Earphone (L)
REW Button -
FF Button .
PLAY/ PAUSE / STOP Button """""""""""
Earphone (R) ...
Package Contents
Earbuds (2 Sets) USB Charging Cable User Manual WEEE Card
7%" Specification
Item Description
Bluetooth'D specification 3‘0 (Headset I Hands-Free IAZDP Profiles)
Battery Battery 3.7V/ 195mAh Li-Polyrner
Standby time / Talk Trme Up to 500Hrs/ Up to 15Hrs
Music play time Up to 10Hrs
Charging time < 2.0Hrs
Charging rated input 00 4.75 V ~ 5.6 V, 400rnA
Operation temperature -10°C ~ 60°C
Dimension I weight 138.5(W) X 173.1mm(L) X 17.5mm(T)/ 369
Power On I Power Off
- Move the Power switch to the ‘ON' or ‘OFF' side.
3 Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light and change to violet
when charged 80% and above.
- When charging is completed, the LED indicator will show a solid blue light.
5‘ V; Low Battery
-An announcement will be made once every 2 minutes.
- If the battery is not charged, the headset will turn off.
Battery Status Alert
- Press and hold the VOLUME DOWN button for 1 second.
- There are‘al levels of battery status
Battery status mm—
Voice Prompt Battery Hi-h Batte Medium
Blinking Blinking ‘ Blinking
LED display Blue LED Violet LED ‘ Red LED
3 times 3 times 3 times
- HES-750 battery status indicator will appear on the iPhone screen.
ENG
9N3
- Before using the headset for the first time. you must pair it with a Bluetooth-enabled
handset.
- To pair your headset with an additional handset, the headset must be placed in
Pairing Mode.
- There are 2 Pairing Mode Methods with the HES-750.
Easy Pgmgg (First Time Pairing)
1. Move the Power switch to the ‘ON' side to turn on the HES-750. When the headset
enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset. find the Bluetooth Menu and “search for" or “add” new
devices.
- Select ”LG HBSYSO" from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter “0000" (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
- Once pairing havoompleted successfully. you will hear "Your headset paired".
4. Some handsets might ask for permission to access the phone‘s contact list. If you
receive a message from your handset. please select “OK“ or "Allow access”
- The HES-750 will automatically turn off if not paired within 3 minutes.
mm (Pairing with another phone or re-pairing)
- With the power off. press the CALL button and move the Power switch to the ‘ON’
side at the same time for 2 seconds.
- When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 4.
_ Mum-connection
Advanced Muitipoint
The HBS-750 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on page 2).
- Turn off the headset.
- With the power off, press the CALL button and move the Power switch to the ‘ON'
side at the same time for 1 second to enter Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset.
(this will be your primary handset).
- Once this handset is paired and connected. go back and connect the originally
paired handset to the headset. This will now be your secondary handset.
" NOTE: When the HES-750 is connected to two handsets at the same
time(Multipoint). the headset calling functions will work with the primary handset.
* NOTE: In case of failure to connect to the primary phone through Easy Pairing,
HES-750 will enter pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call. press the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls. press the CALL button for 1 second.
- To terminate the active call or both calls at once, briefly press the CALL button.
— If both handsets are receiving an incoming call, the headset will default to the
primary device.
ENG
9N3
, , Auto Reconnect
- If the HBS-750 is turned off (either accidentally or intentionally) while connected
to a handset, the headset and handset will disconnect. The headset and handset
will automatically reconnect when the HBS-750 is turned back on while in range.
- Secondary handset need to be connected via selecting “LG HBS750" from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-750 will vibrate to alert.
* lf vibrate is set to off by pressing VOLUME UP button for 3 seconds. HBS—750
will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briefly press the CALL button on the HES-750 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset’s
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS—750 will alert once with no attempt
to reconnect.
, Calling
Answering a call I Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* If vibrate is set to off by pressing VOLUME UP button for 3 seconds, HBS-750
will not vibrate.
- Briefly press the VOLUME DOWN button to stop vibration.
- Briefly press the CALL button.
Transferring a call
- While on a call on your handset, press and hold VOLUME UP button for 3
seconds to transfer the audio either from headset to handset or from handset
to headset.
Voice dialing
- Briefly press the CALL button to activate “Voice Command”.
Note: if the handset does not support Voice Dialing. it is possible that performing
this action will activate Last Number Redial.
Last number redial
- Press and hold the CALL button for tsecond to activate “Last Number Reclial".
The headset will beep, and call the last number dialed.
Call waiting
-Answer a second call without hanging up the first call by pressing the CALL
button for 1 second (you will hear a beep). Press the CALL button for 1second to
turn to the original call.
- Briefly press the CALL button to terminate the active call or both calls at once.
(subject to handset’s support)
Rejecting a Call
- Press the CALL button for 1second when the handset rings.
Mic Mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously
for 1 second to mute/unmute the Mic during conversation.
53; Volume control
- Briefly press the VOLUME button.
udio streaming controls
- PLAY: Briefly press the PLAY/PAUSE button.
- PAUSE : Briefly press the PLAY/PAUSE button.
- STOP: Press and hold the PLAY/PAUSE button.
- NEXT SONG : Briefly press the FF button.
- PREVIOUS SONG : Briefly press the REW button.
- FAST FORWARD : Press and hold the FF button.
- REWIND : Press and hold the REW button.
ENG

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Modify Date                     : 2015:07:07 15:03:07+09:00
Create Date                     : 2015:07:07 15:03:07+09:00
Metadata Date                   : 2015:07:07 15:03:07+09:00
Creator Tool                    : nPDF, http://iblogbox.com/npdf
Format                          : application/pdf
Document ID                     : uuid:258af0d5-9035-487b-95fa-703c63f79cd8
Instance ID                     : uuid:0cf75dc0-dcd8-45cb-b500-b62cd11dff1f
Producer                        : nPDF, http://iblogbox.com/npdf
Page Count                      : 7
Creator                         : nPDF, http://iblogbox.com/npdf

EXIF Metadata provided by EXIF.tools