LG Electronics USA HECTONA LASER TV User Manual G User s manual
LG Electronics USA LASER TV G User s manual
user manual
Order Number : GETEC-C1-12-389 FCC Part 15 subpart B Test Report Number : GETEC-E3-12-148 Page 1 / 1 APPENDIX G : USERâS MANUAL EUT Type: LASER TV FCC ID.: BEJHECTONA Owner's Manual LASER TV Please read this manual carefully before operating your projector and retain it for future reference. HECTO-NA www.lg.com 2 LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. âDolby âand the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. . This is an ofďŹcial DivX CertiďŹed device that plays DivX video. Visit divx. com for more information and software tools to convert your ďŹles into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertiďŹed device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. âDivX CertiďŹed to play DivX video up to HD 1080p, including premium content.â âDivX, DivX CertiďŹed and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.â âCovered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274â HDMI, the HDMI logo and High-DeďŹnition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions. NOTE yImage shown may differ from your projector. yYour projectorâs OSD (On Screen Display) may differ slightly from that shown in this manual. SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. The lightning ďŹash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated âdangerous voltageâ within the productâs enclosure that may be of sufďŹcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION 0 TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Indoor Installation WARNING yDo not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc. - This may cause a fire. yDo not place flammable materials such as aerosols near the projector. - This may cause a fire. yDo not allow your children to cling to or climb up to the projector. - The projector may fall down and cause personal injury or death. yDo not place the projector directly on a carpet, rug or place where ventilation is restricted such as a book shelf or closet. - This may cause the projector's internal temperature to rise and cause a fire. yDo not place the projector close to sources of steam or oil such as a humidifier or kitchen counter. - This may cause a fire hazard or an electric shock. yDo not place the projector where it might be exposed to excessive dust. - This may cause a fire. 4 SAFETY INSTRUCTIONS yDo not use the projector in a damp place such as a bathroom where it is likely to get wet. - This may cause a fire or an electric shock. yDo not allow a tablecloth or curtain to block the vents. - This may cause the internal temperature of the projector to rise and cause a fire. yThe distance between the projector and the wall should be more than 30 cm for ventilation purposes. - Otherwise, this may cause the internal temperature of the projector to rise and cause a fire. CAUTION yWhen installing the projector on a table, be careful not to place it near the edge. - The projector may fall causing injury to persons or damage to the projector. Make sure that you use a stand suitable for the size of projector. yTurn off the projector, disconnect the power supply and remove all connec tions before moving the projector. - A damaged cord may cause a fire or an electric shock. yDo not install the projector on an unstable or vibrating surface such as a vibrating shelf or tilted surface. - It may fall and cause injury. yBe careful not to tip the projector over when connecting external devices to the projector. - This may cause injury to persons or damage to the projector. Power WARNING yThe earth wire should be connected. - Inappropriate earth grounding may cause damage to the projector or an electric shock when there is an electrical surge. If the projector must be installed at a place where earth grounding is not possible, purchase a circuit breaker and connect the projector to its wall outlet. Do not ground the projector to the gas pipe, water pipe, lightning rod, or telephone line, etc. yThe power plug should be fully inserted into the wall outlet. - Unstable connection may cause a fire. yDo not place heavy objects on the power cord or place the cord underneath the projector. - This may cause a fire or an electric shock. yNever touch the power plug with a wet hand. - This may cause an electric shock. yDo not connect too many devices to the same power extension. - Overheating may cause a fire. yRemove dust or contaminants around power plug pins or wall outlets. - This may cause a fire. yTo turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation. SAFETY INSTRUCTIONS CAUTION yHold the plug firmly when unplugging. - A broken wire in the cord may cause a fire. yEnsure the power cord or plug is not damaged, modified, severely bent, twisted, pulled, sandwiched or heated. Do not use a loose wall outlet. - This may cause a fire or an electric shock. yKeep the power cord away from any heating devices. - The cord coating may melt and cause an electric shock. yPlace the projector where people will not trip over or tread on the power cord or plug to protect the power cord and plug from any damage. - This may cause a fire hazard or an electric shock. yDo not turn the projector on or off by plugging in the power plug or unplugging it from the wall outlet. (Do not use the power plug as a switch.) - This may cause an electric shock or damage to the projector. yDo not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is disconnected from the wall outlet. - This may cause an electric shock. yUse only the official power cord which is provided by LG Electronics, Inc. Do not use other power cords. - This may cause a fire or an electric shock. When in Use WARNING yDo not place anything containing liquid, such as a vase, flowerpot, cup, cosmetics, chemicals, decorations or candles, etc., on top of the projector. - Possible fire, electric shock, or falling may cause physical injury. yIn the event that there is a big impact to the projector or the cabinet is damaged, switch it off, unplug it from the wall outlet and contact an authorized service center. - Otherwise, this may cause a fire or an electric shock. yDo not insert pieces of metal such as coins, hairpins or metal debris, nor flammable materials such as paper or matches into the projector. - This may cause a fire or an electric shock. yIn the event that liquid or a foreign object falls into the projector, please switch it off and unplug it from the wall outlet and contact an LG Electronics Service Center. - Otherwise, this may cause a fire or an electric shock. yWhen replacing a battery of the remote control, make sure a child does not swallow the battery. Keep the battery out of reach of children. - In the case of a battery being swallowed by a child, please consult a doctor immediately. yDo not remove any covers except for the lens cap. There is a high risk of electric shock. yDo not look directly into the lens 6 SAFETY INSTRUCTIONS when the projector is in use. The strong light may damage your eyes. yWhen the lamp is on or has just been turned off, avoid touching the air vent or lamp because these will be very hot. yIf there is a gas leak, do not touch the wall outlet. Open the window for ventilation. - A spark may cause a fire or burn. yNever touch the projector or power cord during thunder or lightning. - This may cause an electric shock. yDo not use the projector near an electronic device which generates a strong magnetic field. yStore the vinyl envelope used to pack the projector in a safe place away from children. - It could cause suffocation if used improperly. yDo not use 3D glasses if you do not watch 3D. yDo not keep your hand on the projector for a long time when it is running. yWhen you play a game by connecting a game console to a projector, it is recommended that you maintain a distance of more than four times the diagonal length of the screen. yMake sure that the length of connecting cable is long enough. Otherwise, the product may fall causing personal injury or damage to the product. CAUTION yDo not place a heavy object on the projector. - It may fall down and cause physical injury. yBe careful to prevent the lens from heavy impact during transportation. yDo not touch the lens. The lens may be damaged. yDo not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing. yIn the event that no image appears on the screen, switch the projector off, unplug it from the wall outlet and contact an authorized service center. - Otherwise, this may cause a fire or an electric shock. yDo not drop an object onto the projector or apply heavy pressure to it. - This may cause injury to persons or damage to the projector. yThe distance between your eyes and the screen must be around 5 7 times the diagonal length of the screen. - If you watch the screen at a close distance for a long time, your eye sight may become worse. SAFETY INSTRUCTIONS Cleaning WARNING yDo not spray the projector with water when cleaning. Do not allow water to go into the projector or do not allow it to get wet. - This may cause a fire or an electric shock. yWhen there is smoke or a strange smell coming out from the projector or a foreign object falls into the projector, please switch it off and unplug it from the power outlet and contact an LG Electronics Service Center. - If not, this may cause a fire or an electric shock. yUse an air spray or soft cloth or cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens. CAUTION yContact your seller or the Service Center once a year to clean the internal parts of the projector. - If you do not clean the contaminated interior of the projector for a long time, there may be a fire or damage to the projector. yWhen cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. When cleaning the plastic parts, such as the projector case, do not use cleanser, automobile or industrial shiner, abrasive or wax, benzene, alcohol, etc., which can damage the product. - This can cause fire, electric shock or product damage (deformation, corrosion and damage). 8 SAFETY INSTRUCTIONS OTHERS WARNING yOnly a qualified technician can disassemble or modify the projector. For inspection, adjustment, or repair, contact your seller or the Service Center. - Otherwise, this may cause a fire or an electric shock. yDispose of the used battery properly. - Otherwise, this may result in explosion or fire. yThe correct method of disposal may vary depending on your country or region. Dispose of the battery pack according to the appropriate instructions. yDo not throw or disassemble the battery. -Otherwise, this may result in fire or explosion due to damage to the battery. yAlways use batteries approved and certified by LG Electronics. - Otherwise, this may result in fire or explosion. yStore the battery away from metallic objects, such as keys and paper clips. yExcess current may cause a rapid increase in temperature, resulting in fire or burns. yDo not store the battery near any heat source, such as a heater. - This may result in fire or damage the product. yDo not store it at temperatures higher than 60 °C or in high humidity. yKeep the battery out of reach of children. - This may result in personal injury or damage to the product. yMake sure that the battery is installed correctly. yIncorrect battery replacement may cause fire. CAUTION yUnplug the power cord if the projector is not used for a long period. - Accumulated dust may cause overheating, an electric shock from corroded insulation and a fire from an electrical surge. yOnly use the specified type of battery. - Otherwise, this may cause an electric shock caused by overheating and leakage. SAFETY INSTRUCTIONS FCC NOTICE ANTENNA Outdoor Antenna Grounding yIf an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Antenna Lead in Wire Ground Clamp Electric Service Equipment Ground Clamp NEC: National Electrical Code Antenna Discharge Unit (NEC Section 810-20) Grounding Conductor (NEC Section 810-21, Power Service GroundingElectrode System (NEC Art 250, Part H) Warning - Class B (b) For a Class B Digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. Any changes or modiďŹcations in construction of this device which are not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. 10 SAFETY INSTRUCTIONS Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream through designated collection facilities appointed by your government or your local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city ofďŹce, waste disposal service or the shop where you purchased the product. Disposal of waste batteries/accumulators 1. When this crossed-out wheeled bin symbol is attached to batteries/accumulators of Your product it means they are covered by European Directive 2006/66/EC. 2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005 % of mercury, 0.002 % of cadmium or 0.004 % of lead. 3. All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 4. The correct disposal of Your old batteries/ accumulators will help to prevent potential negative consequences for the environment, animal and human health. 5. For more detailed information about disposal of Your old batteries/accumulators, please contact Your city ofďŹce, waste disposal service or the shop where You purchased the product. For USA NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installerâs attention to Article 820 - 40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, speciďŹes that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Contents 11 Contents LICENSES SAFETY INSTRUCTIONS PREPARATION 13 Accessories 13 Optional Extras 14 Parts and Components 15 Installation 16 Installation Precautions 16 Projection Distance per Screen Size 17 How to Install the Projector Using a Tripod 18 Kensington Security System 18 REMOTE CONTROL ENTERTAINMENT 28 MY MEDIA 28 Connecting USB Storage Devices 28 MOVIE LIST 30 PHOTO LIST 36 MUSIC LIST 38 FILE LIST 40 3D FUNCTION 42 Before Watching 3D 42 While Watching 3D 42 Requirements for Watching 3D Images 44 To Use DLP-LINK (DLP-Ready) Type Glasses 46 Watching 3D Images 46 19 USING THE PROJECTOR 21 Connecting to an Antenna or Cable Connecting an Antenna or Basic Cable Connecting a Cable Box Watching Projector Turning on the Projector Focus and Position of the Screen Image Watching Projector Managing Channels Setting Up Channels Using Additional Options Adjusting Aspect Ratio Using the Keystone Function Using the Input List Blank Function Using the Quick Menu 21 21 21 22 22 22 22 23 23 25 25 26 26 27 27 CUSTOMIZING SETTINGS 47 SETUP Menu PICTURE Settings AUDIO Settings CHANNEL Settings TIME Settings LOCK Settings OPTION Settings 47 48 51 52 53 54 56 MAKING CONNECTIONS 59 Connecting to an HD Receiver, DVD, or VCR Player 60 HDMI Connection 60 Connecting to a PC 60 RGB Connection 60 Connecting to the AV INPUT 61 Component Connection 62 Connecting to Headphones 62 12 Contents MAINTENANCE 63 Cleaning the Projector Cleaning the Lens Cleaning the Projector Case 63 63 63 SPECIFICATIONS 64 PREPARATION PREPARATION Accessories Check enclosed accessories. The picture may be different from an actual product. ENERGY SAVING INPUT FLASHBK LIST FAV VOL 3D CH BACK HOME MUTE Q.MENU SETTINGS HOME MY APPS YRO OK FK 6G AV MODE P\#DSSV /T1PHQX EXIT STILL SURMHFWRU INFO â L/R Keyâs AUTO Keyâs SLEEP RATIO Remote Control AAA Batteries Owner's Manual Magic Remote Control AA Batteries Computer Cable Power cable AC-DC Adaptor yWhen connecting a cable to the HDMI or USB port, it may not be connected properly if the size of jack to the USB/HDMI port is too big. Use a standard sized jack. 13 14 PREPARATION Optional Extras To purchase optional extras, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Without prior notice, optional extras are subject to change in order to improve the performance of the product, and new accessories may be added. Screen for Projector Tripod HDMI Cable Video Cable Audio Cable 3D glasses (DLP-LINK or DLPReady Type) RGB to Component cable Component Cable RF cable PREPARATION 15 Parts and Components * The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. When powered on, the LED of the control panel turns on. Back USB ě ë Ľ1 íě머ě Ready 3(PC) ěí ë/ěźě´ë¸ ě ë Ľ ě´ě´í° ěě ěť´íŹëí¸ ě ë Ľ 1(ARC) ěě(PC) ě ë Ľ ěěą ě ë Ľ (RGB/HDMI-PC) LAN ě¸ëś ě ë Ľ ě° ě˘ ěě HDMI ě ë Ľ ě˘(ëŞ¨ë ¸)-ěěą-ě° TRIGGER (12V) ěěą ę´ëě§í¸ ěěąěśë Ľ ěëšě¤ ě ěŠ Vent1 Auto Door Vent1 Speaker USB Button (Power) (Menu) â§, â¨, ďź, ďź áŻ(OK) Description Turns the projector on or off. Selects or closes menus. Sets the function or moves the cursor. Checks present mode and saves function changes. 1 Due to the high temperature air coming out of the vents, do not get close to the vents. 2 Do not touch the lens when using the projector. The lens may be damaged. 16 PREPARATION Installation Installation Precautions yPlace the projector in a well-ventilated environment. - To prevent internal heat from building up, install the projector in a wellventilated place. Do not place anything near the projector as this may block its air vents. If the air vents are blocked, the internal temperature will increase. - Do not place the projector on a carpet or rug. If a projector model has its inlet vent on its bottom, do not block the vent and use the projector on a leveled solid surface. - Be sure to prevent foreign objects such as paper debris from entering the projector. - Leave an adequate distance (30 cm or more) around the projector. yDo not place the projector in a hot or humid environment. - Do not place the projector in a hot, cold, or humid environment. (See64 Page regarding operating temperature and humidity.) yDo not place the projector in a place where it will easily attract dust. - This may cause a fire. yDo not remove any covers except for the lens cap. There is a high risk of electric shock. yThe projector is manufactured using high-precision technology. You may, however, see tiny black dots and/ or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. yThe remote control may not work in an environment where a lamp equipped with electronic ballasts or a three-wavelength fluorescent lamp is installed. Replace the lamp with an internationally standardized lamp for the remote control to work normally. PREPARATION 17 Projection Distance per Screen Size Place the projector on a sturdy, level surface, together with the PC or audio/video source. 2 Place the projector at an appropriate distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3 Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the image on the screen will be tilted and the image quality will be poor. If the screen image is crooked, use the Keystone function. (see page 26) 4 Connect the power cords of the projector and the connected devices to the wall outlet. Screen +#pp, 49#=#<#Vfuhhq Vfuhhq#Vl}h 5873# +5546#{#4578, 883 863 59518 6;3 18 PREPARATION Kensington Security System yThis projector has a Kensington Security System Connector on the panel. Connect a Kensington Security System cable as below. yFor detailed installation and use of the Kensington Security System, refer to the userâs guide included with the Kensington Security System set. yThe Kensington Security System is an optional item. yWhat is Kensington? Kensington is a company that sells security systems that prevent expensive electronic equipment such as a computer or laptop from being stolen. Internet Homepage: http://www.kensington.com REMOTE CONTROL 19 REMOTE CONTROL Open the battery cover on the back of the remote control and insert the speciďŹed batteries as per instructions . The same type of batteries must be used. â ⥠POWER Turns the projector on or off. INPUT Changes the input source. MUTE Mutes all sounds. VOL +, Adjusts the volume level. CH , Changes the channel or page.. ⳲⳎážá§ INFO Views the information of the current program and screen. BLANK Turns the projector screen on or off. Up/Down/Left/Right Buttons Sets the function or moves the cursor. OK ᯠChecks present mode and saves function changes.. MARK Allows you to select optional functions. FAV Accesses your favorite channel list. â˛ášââłż ââłżáźžá Returns to the previous level. SETTINGS Selects or closes menus. Q.MENU Accesses the quick menu. 20 REMOTE CONTROL Alphanumeric buttons Enters letters and numbers. Playback Control Buttons Controls playback of USB mode. LIST Accesses the saved channel list. - (Dash) Inserts a dash between numbers such as 2 - 1 and 2 - 2. FLASHBK Tunes to the last channel viewed. 3D Shows 3D images. L/R Switches left and right in 3D mode. Color buttons Access special functions in some menus. ⳲⳎážá§ â˛ášââłż ââłżáźžá NOTE yWhen using the remote control, the optimal remote range is less than 3 meters (left/right) and within a 30 degree arc of the IR receiver. yFor seamless operation, do not block the IR receiver. yWhen you carry the remote control in the portable bag, make sure that the buttons on the remote control are not pressed by the projector, cables, documents or any other accessories in the bag. Otherwise, it may significantly reduce the battery life. 63äŽ#63äŽ Using the PROJECTOR Using the PROJECTOR Connecting to an Antenna or Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. Connecting a Cable Box Connect the projector to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 Ί). Connecting an Antenna or Basic Cable ANTENNA / CABLE INPUT Connect the projector to a wall antenna socket with an RF cable (75 Ί). ANTENNA / CABLE INPUT #CAUTION yMake sure not to bend the copper wire of the RF cable. NOTE yUse a signal splitter to use more than 2 projectors. yVisit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna. Copper wire Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your projector. 21 22 Using the PROJECTOR Watching Projector Watching Projector Turning on the Projector 1 Connect the power cord correctly. 2 After waiting for a moment, press the POWER button on the remote control or the control panel. (The light on the control panel will be turned on.) 3 In the Language Selection screen, In Standby mode, press the POWER button to turn the projector on. 2 Press the INPUT button and select the input signal you want. 3 Control the projector using the following buttons while watching projector. Button CH , VOL -, + Description Scrolls through saved channels. Selects a channel on the saved or recent watched channel list. Selects a channel by entering numbers. Adjusts the volume level. MUTE Mutes all sounds. Q.MENU Accesses the quick menu. (see page 27) FLASHBK Alternates between the last two channels selected. select a language. 4 Select an input signal by using the LIST INPUT button on the remote control. Focus and Position of the Screen Image When an image appears on the screen, check if it is in focus and ďŹts the screen properly. Focus ring 0-9 4 To turn the projector off, press the POWER button. yTo adjust the focus of the image, rotate the focus ring. Using the PROJECTOR Managing Channels Setting Up Channels Storing Channels To store channels automatically, 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to CHANNEL and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Select Start to start automatic tuning. The projector scans and saves available channels automatically. 5 When you are ďŹnished, press SETTINGS. To store channels manually, 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to CHANNEL and press OK. 3 Press the Navigation buttons to scroll to Manual Tuning and press OK. 4 Scroll through the channel types, and then add or delete channels. 5 When you are ďŹnished, press SETTINGS. 23 #NOTE yIf the projector scans a blocked channel, you will be prompted to enter your password to keep the channel scanned. yYou can store up to 1000 channels. The number of channels that you can store differs depending on the broadcasting signal environment. yThe channels are stored in the order of DTV, TV, Cable DTV and Cable TV. Using the PROJECTOR 24 Editing Your Channel List Favorite Channel Setup 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to CHANNEL and press OK. 3 Press the Navigation buttons to scroll to Channel Edit and press OK. Press CH or Number buttons to access to select your desired channel. 2 Press FAV. to access the Favorite List. 3 Press the /# #buttons to scrolls through channel group. 4 Edit channels using the following 4 Press the Yellow button. buttons. &KDQQHO(GLW )DYRULWH*URXS '79 79 3DJH &DEOH'79 &DEOH79 Favorite Channel List 1 Press FAV. to access the Favorite List. 2 Press the Navigation buttons to scroll to a channel.and press OK. áŻ&K&KDQJH áŻ1DYLJDWLRQ Button OK â§, â¨, ďź, ďź FAV áą)DYRULWH&K áą3DJH&KDQJH áą)DYRULWH&K*URXS áŻ%ORFN8QEORFN á°ł3URYLRXV áŻ$GG'HOHWH )DYRULWH/LVW âŤÜ⏠Description Selects the highlighted channel to view. Scrolls through channel types or channels. Adds a favorite channel list. Moves to the previous or next page. Q.MENU Changes the favorite group. Yellow Block or unblock a channel. Blue Adds or deletes a channel. The deleted channel displays in blue. á°ł([LW áŻ)DYRULWH&K*URXS *URXS $ âŤŰ˝âŹ ᯠᯌ ᯹ ᯌ CH áŻ&K5HJ Button â§, ⨠ďź, ďź CH 5 When you are ďŹnished, press SETTINGS. Yellow Blue áŻ&K(GLW Description Scrolls through channels. Scrolls through channel group. Moves to the previous or next page Register or cancel the current channel in favorite channel list. Go to the âCHANNEL menu - Channel Editâ. Using the PROJECTOR 25 Using Additional Options Adjusting Aspect Ratio You can also change the image size by pressing Q.MENU or SETTINGS. NOTE ySome options may not be available depending on input signals. Zoom: Enlarges an image to ďŹt the screen width. The top and bottom of the image may be truncated. yPress the or button to zoom in or out of the image. or button to move yPress the the image. FULL: Changes to the full screen regardless of the aspect ratio. 16:9: Resizes images to ďŹt the screen width. Just Scan: Displays video images in the original size without cutting off the edges. Cinema Zoom: Formats an image to the cinemascope ratio, 2.35:1. It ranges from 1 to 16. yPress the or button to zoom in or out of the image. yPress the or button to move the image. NOTE NOTE yIf you select Just Scan, you may see image noises at the edge or edges of the screen. Set By Program: Displays images in the same aspect ratio as the original image. 4:3: Resizes images to the 4:3 aspect ratio. yIf you enlarge or reduce an image, the image may be distorted. 26 Using the PROJECTOR Using the Keystone Function Using the Input List To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen. Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector at an optimal angle. Using the Input List Press the INPUT button to access the input sources. - The connected input mode appears ďŹrst. However, AV / Component input is always activated. ,1387 79 Ř.H\VWRQH ⍠Ü⏠áŻ0RYHáŻ2. $9 5*%3& 86% &RPSRQHQW +'0, âŤŰ˝âŹ áŻ2. 1 Press the SETTINGS button. 2 Press the , , or button to ,QSXW/DEHO 2 Select an input signal using the INPUT select OPTION and press the OK button. button and the projector is switched only to the connected input mode. You can use the , , or button to switch between all the input modes. 3 Press the , , or button to select Keystone and press the OK button. 4 Press the or button to adjusted Keystone. yKeystone can be adjusted from -40 to 40. ([LW Adding an Input Label Displays which devices are connected to which input ports. ,QSXW/DEHO 5 Press the OK button after âŤÜ⏠âŤŰ˝âŹ &RPSRQHQW âŤÜ⏠âŤŰ˝âŹ 5*%3& âŤÜ⏠âŤŰ˝âŹ +'0, âŤÜ⏠âŤŰ˝âŹ ,1387 adjustment. &ORVH Press the INPUT button to access the input sources. 2 Press the BLUE button. 3 Use the or button to scroll to one of the input sources. 4 Use the or button to select one of the input labels. Using the PROJECTOR Blank Function Using the Blank Function This function may be effective when you need to draw attention during a meeting or training. Press the BLANK button, and the screen is covered by the background color. You can change the background color by referring to "Selecting a Blank Image". Press any button to clear the blank function. To cover the screen temporarily, press the BLANK button on the remote control. Do not block the lens with any object while the projector is running. It may become overheated and deformed or even cause a ďŹre. Selecting a Blank Image 1 Press the SETTINGS button. 2 Press the , , or button to select OPTION and press the OK button. 3 Press the , , or button to select Blank Image and press the OK button. 4 Use the , button to move to the setting or option you want and press the OK button. 27 Using the Quick Menu You can customize frequently used menus. Press Q.MENU to access the quick menus. 2 Press the or button to scroll through the following menus and press OK. Menu Description Aspect Resizes an image. Ratio (see page 25) PJT Mode Turns the projected image upside down or ďŹips it horizontally. Picture Changes the picture Mode mode. (see page 48) Multi Changes the audio Audio language (Digital signal) SAP Changes the MTS sound (Analog signal) Sleep The projector is turned off Timer at the preset time. Clear Makes the voice from the Voice II projector crisp and clear. Del/Add Edits the channels to add or delete the channel. USB Eject a USB device. Device The menu is displayed only when the USB device is connected. 3 Press the , , , or button to scroll through the following menus. 28 ENTERTAINMENT ENTERTAINMENT MY MEDIA Connecting USB Storage Devices Connect a USB memory stick as shown below. When a USB storage device is connected, the USB adjustment screen appears. You cannot write or delete data on the USB storage device. USB memory stick To disconnect the USB storage device, 1 Press the Q.MENU button. 2 Use the or button to move to USB Device and press the OK button. 3 Remove the USB device. NOTE yAfter the USB storage device is disconnected, it cannot be read. Remove the USB storage device and connect it again. ENTERTAINMENT Tips for Using USB Devices yOnly a USB storage device is recognizable. yUSB hubs are not supported. yA USB storage device which uses its own driver may not be recognized. yThe recognition speed of a USB storage device will depend on each device. yIf a normal USB device does not work, disconnect and reconnect it. Please do not turn off the projector or unplug the USB device when the connected USB device is working. The USB device or stored files may be damaged. yPlease do not connect the USB storage device that has been manipulated on the PC. The projector may not operate properly or fail to play files. Use a USB storage device which contains normal music, photo, video, or document files. yPlease only use a USB storage device formatted as a FAT16, FAT32, or NTFS file system provided by Windows. In case a storage device formatted as a different utility program is not supported by Windows, it may not be recognized. yPlease connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. 29 yPlease connect a USB storage device with a cable provided by the USB manufacturer. When you use a cable that is not provided by a USB manufacturer or an excessively long cable, the device may not be recognized. ySome USB devices may not be supported or will not work properly. yIf the length of a folder or file is too long, the folder or file may not be recognized properly. yThe files in a USB storage device are sorted in the same way as Windows XP. Up to 100 English characters for a file name are allowed. yThe data of a USB device may be damaged, so it is recommended to backup any important files. Because a user is responsible for data management, the manufacturer is not responsible. yIt is recommended to use a USB memory stick which is 32 GB or less and a USB hard disk which is 1 TB or less. Any device with more than the recommended capacity may not work properly. yIf a USB storage device is not working properly, disconnect it and connect it again. yIf a USB external hard disk with the power saving function does not work, turn the hard disk off and on again to make it work properly. yUSB storage devices below USB 2.0 are supported as well. However, they may not work properly in the movie list. 30 ENTERTAINMENT MOVIE LIST In the Movie List, you can watch movies stored on the connected USB device. Tips for Playing Video Files ySome subtitles created by a user may not work. ySome special characters are not supported in subtitles. yHTML tags are not supported in subtitles. yTime information in a subtitle file should be arranged in ascending order to play the subtitle properly. yChanging font and color in subtitles is not supported. yA language which is not specified in the subtitle languages is not supported. (see page 34) ySubtitle files of 1 MB or larger are not supported. yThe screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed. yA damaged video file may not be played properly, or some functions may not be available. yVideo files created with some encoders may not be played properly. yEither audio or video may only be supported depending on the video or audio packet structure of a video file. yVideo files with higher resolution than the maximum supported for each frame may not be played properly. yVideo files in formats other than the ones specified above may not be played properly. yStreaming files which include GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation) is not supported. yUp to 10,000 sync blocks are supported in the subtitle file. ySeamless playback is not guaranteed for files encoded level 4.1 or higher in H.264/AVC. yDTS audio codec is not supported. yVideo files larger than 30 GB (Gigabytes) are not supported. yPlaying a video via a USB connection that does not support high speed may not work properly. yA video file and its subtitle file must be located in the same folder. A video file name and its subtitle file name must be identical in order to display the subtitle properly. yWhile watching a video using the movie list function, you cannot adjust the picture mode. yTrick Mode does not support other functions than á°Šif video files do not have index information. yWhen playing a video file using network, the Trick mode is limited to 2X speed. yVideo file names that contain special characters may not be playable. ENTERTAINMENT 31 Supported Video Formats File Extensions .asf .wmv Audio/ Video Video Audio Video .divx .avi Audio .mp4 .m4v Video Audio Video .mkv Audio Video .ts .trp .tp Audio Video .vob Audio .mpg .mpeg .mpe Video Audio Codec ProďŹle/Level Support Advanced ProďŹle @ Level 3 (e.g.720p60, 1080i60, 1080p30) VC-1 Advanced ProďŹle Only streams compliant to SMPTE 421M VC-1 standard are supported. Simple ProďŹle @ Medium Level (e.g.CIF,QVGA) VC-1 Simple Main ProďŹle @ High Level (e.g.1080p30) and Main ProďŹles Only streams compliant to SMPTE 421M VC-1 standard are supported. WMA Standard WMA 9 Professional Divx3.11 Divx4 Divx5 Advanced Simple ProďŹle(720p/ 1080i) Divx6 XViD Advanced Simple ProďŹle(720p/ 1080i) MPEG-1 Layer I,II MPEG-1 Layer III (MP3) Dolby Digital WMA Standard WMA 9 Professional Korea only DTS Main ProďŹle @Level 4.1 H.264 /AVC High ProďŹle @Level 4.1 (e.g.720p60, 1080i60, 1080p30) MPEG-4 Part 2 Advanced Simple ProďŹle(720p/ 1080i) HE-AAC HE-AAC-LC and HE-AAC Main ProďŹle @Level 4.1 H.264 /AVC High ProďŹle @Level 4.1 (e.g.720p60, 1080i60, 1080p30) HE-AAC HE-AAC-LC and HE-AAC Dolby Digital DTS Korea only Main ProďŹle @Level 4.1 H.264 /AVC High ProďŹle @Level 4.1 (e.g.720p60, 1080i60, 1080p30) MPEG-2 Main ProďŹle @High Level (e.g.720p60, 1080i60) MPEG-1 Layer I,II MPEG-1 Layer III (MP3) Dolby Digital HE-AAC HE-AAC-LC and HE-AAC MPEG-1 MPEG-2 Main ProďŹle @High Level (e.g.720p60, 1080i60) Dolby Digital LPCM MPEG-1 Layer I,II MPEG-1 MPEG-1 Layer I,II Only streams compliant conďŹgured properly for TS, PS or ES 32 ENTERTAINMENT Supported Audio Files No Audio Codec Bit rate Sampling rate MP3 32 kbps - 320 kbps 32 kHz - 48 kHz AC3 32 kbps - 640 kbps 32 kHz, 44.1 kHz, 48 kHz MPEG 32 kbps - 448 kbps 32 kHz - 48 kHz AAC,HEAAC 24 kbps - 3844 kbps 8 kHz - 96 kHz CDDA 1.44 kbps LPCM Multi-channel : 44.1 kHz, 1.41 Mbps - 9.6 Mbps 88.2 kHz/ 48 kHz, 96 kHz Stereo : 176.4 kHz, 192 kHz 44.1 kHz Remark DTS Audio codec is Korea only. 33 ENTERTAINMENT Browsing Movie List Play a video ďŹle stored in the connected device. 6 Control playback by using the following buttons. 1 Connect a USB storage device. 2 Press the SETTINGS button. 3 Accesses the MY MEDIA. 4 Use the , , or button to áŻáŻ select Movie List and press the OK button. 5 Use the , , or button to select the ďŹle you want and press the OK button. ✠⡠⺠⸠⚠3DJH 0RYLH/LVW 86%6725$*('(9,&( ERRN GRF SLF áą3DJH&KDQJH YLG 3DJH #########%XWWHUIO\B G áŻ*RWRURRWIROGHU áŻ*RWRXSSHUIROGHU á°ł([LW ❠⟠⽠⡠File List ⸠Moves to the upper level folder. âš Current page/Total no. of folder pages âş Current page/Total no. of ďŹle pages âť Moves to the top level folder. âź Moves to the upper level folder. â˝ Exit Movie List. Setting Description ââś Shows the current playing position. Use ďź, ďź buttons to move forward or backward. á°§ Stops playing and returns to Movie List. á°Ś Returns to normal playback. á°¨ Pauses the media player. If no button is pressed on the remote control for 10 minutes after pausing, the playback is restarted. ᰨᰊ Displays in slow motion. á° Description âś Thumbnails Abnormal file File not supported Whenever this button is pressed, the playback speed is changed. : x2, x4, x8, x16, x32 You can use the Energy Saving mode. Option A pop-up window will appear. +LGH ([LW Hides the playback bar. Press the OK button to make it appear. Returns to the Movie List screen. 34 ENTERTAINMENT Options for Movie List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , each item. or Setting Subtitle Language Description ySpeed: If a subtitle is not synchronized with its video, you can adjust its speed at 0.5 sec unit. yPosition: Moves the location of a subtitle. ySize: Changes the subtitle font size. Repeat Turns the repeat function on or off. When it is set to off, the next ďŹle can be played sequentially if the ďŹle name is similar. button to set up Set Video Play Setting Description Picture Selects the size of a playback screen. Size yFull: Files are played in full screen mode according to the aspect ratio of video. y16:9: Displays the video with the aspect ratio of 16:9. yJust Scan: Displays the video in the original aspect ratio. Audio Language Subtitle Language Allows you to select the language you want for the ďŹle with multiple audio tracks. This option is not available if the ďŹle has only one audio track. The subtitle can be turned on or off. yLanguage: One of any of the available languages can be selected. yCode Page: A character set used for a subtitle can be selected. By default, the subtitle is displayed in a language configured in OPTION Menu Language. ySubtitle Language Subtitle LanLanguage guage Latin1 English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan, Valencian Korean Korean PICTURE Settings You can change video settings. (Refer to "PICTURE Settings" on page 48.) AUDIO Settings You can change audio settings. (Refer to "AUDIO Settings" on page 51.) ENTERTAINMENT Registering the DivX code 35 To deregister the DivX code Please check your DivX code. For more information on the registration process, visit www.divx.com/vod. After registration, your can enjoy DivX VOD content protected by the DivX DRM code. Use the DivX deregistration code to deactivate the DivX DRM function. 2 Move to OPTION and press DivX(R) Press SETTINGS button to enter Setup menu. 2 Move to OPTION and press DivX(R) VOD. 5HJLVWUDWLRQ 'HUHJLVWUDWLRQ &ORVH 3 Press the or button to move to Registration and press the OK button.@ Setting Description Hide Hides the menu on the full size screen. yTo see the menu, press the OK button on the remote control. Exit Setting Slideshow Description Selects the previous or next photo. All photos are displayed during slide show. ySet the time interval of the slide show in Option Set Photo View menu. BGM You can listen to music while viewing photos in full size. ySet the BGM in Option Set Photo View menu. Ṩ Rotates photos. yRotates a photo 90°, 180°, 270°, 360° clockwise. yPhotos cannot be rotated if their width is greater than the height of the max. supported resolution. ᯜ You can move between screens using the navigation buttons. Press the blue button to enlarge the image. You can use the Energy Saving mode. A pop-up window will appear. Option Exit from full screen photo view. 37 38 ENTERTAINMENT Options for Photo List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , each item. or button to set up Set Photo View Setting Description Slide Selects a slideshow speed. speed Selects a music folder for BGM the background music. (BackyYou cannot change the ground music folder while the Music) background music is playing. yFor background music, only the folder from the same device can be selected. PICTURE Settings You can change video settings. (Refer to "PICTURE Settings" on page 48.) MUSIC LIST You can play audio ďŹles stored on the connected device. Supported Music Files *.MP3 Bit rate range 32 Kbps - 320 Kbps ySampling rate MPEG 1 Layer 3: 32 kHz, 44.1 kHz, 48 kHz ySampling rate MPEG 2 Layer 3: 16 kHz, 22.05 kHz, 24 kHz Browsing Music List 1 Connect a USB storage device. 2 Press the SETTINGS button. 3 Accesses the MY MEDIA. 4 Use the , , , button to select Music List and press the OK button. 5 Use the , , or button to select the ďŹle you want and press the OK button. ✠⡠⸠3DJH 0XVLF/LVW 86%6725$*('(9,&( AUDIO Settings You can change audio settings. (Refer to "AUDIO Settings" on page 51.) âş âš áą3DJH&KDQJH 'ULYH 3DJH #########%XWWHUIO\B G áŻ*RWRURRWIROGHU áŻ*RWRXSSHUIROGHU á°ł([LW âť âź â˝ ENTERTAINMENT Description âś Thumbnails Abnormal file Setting Description +LGH Hides the playback bar. yPress the OK button to make the playback bar appear. ([LW Returns to the Music List screen. File not supported ⡠File List ⸠Moves to the upper level folder. âš Current page/Total no. of folder pages âş Current page/Total no. of file pages âť Moves to the top level folder. âź Moves to the upper level folder. â˝ Exit 6 Control playback by using the following buttons. 3DJH 0XVLF/LVW 86%6725$*('(9,&( 'ULYH 3DJH G áŻáŻ á°Ś Setting Description ââś Changes the playing position. á°§ Stops playing. á°Ś Returns to normal playback. á°¨ Pauses the media player. á° 2SWLRQ Options for Music List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , each item. or button to set up Set Audio Play Setting Description Repeat Selects repeat play. Random Selects random play. áą3DJH&KDQJH #########%XWWHUIO\B %PS 39 Plays the previous/next file. You can use the Energy Saving mode. Sets up the options of Music List. AUDIO Settings You can change audio settings. (Refer to "AUDIO Settings" on page 51.) 40 ENTERTAINMENT FILE LIST âś You can see document ďŹles stored on a connected device. ⡠3DJH )LOH/LVW Supported File Formats 86%6725$*('(9,&( ⚠⸠áą3DJH&KDQJH 'ULYH 3DJH ######### DOC %XWWHUIO\B G XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF, Microsoft OfďŹce 97/ 2000/ 2002/ 2003/ 2007 Adobe PDF 1.0/ 1.1/ 1.2/ 1.3/ 1.4 yFile Viewer realigns a document, so it may look different from what is displayed on a PC. yFor documents that include images, the resolution may look lower during the realigning process. yIf the document volume is big or it has many pages, it may take longer to load the document. yUnsupported fonts may be replaced by other fonts. Browsing File List 1 Connect a USB storage device. 2 Press the SETTINGS button. 3 Accesses the MY MEDIA. 4 Use the , , or button to select File List and press the OK button. 5 Use the , , or button to select the ďŹle you want and press the OK button. áŻ*RWRURRWIROGHU áŻ*RWRXSSHUIROGHU á°ł([LW âş âť âź Description âś File List ⡠Moves to the upper level folder. ⸠Current page/Total no. of folder pages âš Current page/Total no. of file pages âş Moves to the top level folder. âť Moves to the upper level folder. âź Exit ENTERTAINMENT 6 Control playback by using the following buttons. yClick Go Page then the pop-up window for selecting the number of page appears. yInput the page to move to the page you want. yPress the volume button to zoom in or zoom out. 1. Press OK. 2. Press the Up/Down/Left/Right buttons to move to Go Page or Zoom. !"#$ %& Setting Description Go Moves to the page you want. Page Use the Up/Down/Left/Right buttons to select a page and press the OK button. Zoom Views the photo in full mode or original mode. Option Sets up the options of File Viewer. Hide Hides the menu. yPress the SETTINGS button to make it appear. Exit Returns to the File Viewer screen. 41 Set FileViewer Option Setting Single On Page Loading Description Loads and displays pages one by one. The initial loading time is short but a contentheavy page may be displayed slowly. Off Loads all pages of a file to memory before it starts to display them. The initial loading time is long but you can navigate pages quickly after loading is complete. If a file is too large, it may fail to load all the pages. Image You can set the quality of QuaIity the image included in the document. The following three options are available for the image quality: High, Medium, Low. Higher the image quality, lower the display time. Docu- Selects initial document ment align method. Align File View settings are default, so close the currently opened document to apply changes to the new document, if any. 42 3D FUNCTION 3D FUNCTION 3D technology uses different video frames for each eye to add depth to the video. Before Watching 3D While Watching 3D WARNING yIf you view 3D images too closely for a long period of time, it may cause blurred vision. yIf you watch the projector or game screen for a long time with 3D glasses on, you may experience dizziness or eye fatigue. yIf you are pregnant, a senior citizen, intoxicated, have heart problems, or easily feel motion sickness, we recommend that you do not watch 3D images. yBecause 3D images can be recognized as real, some viewers may get surprised or overexcited. yDo not watch 3D images near fragile objects or any objects that can be knocked over easily. yTake care not to injure yourself as you may subconsciously try to move away from the life-like 3D images. yPrevent children of 5 years or younger from watching a 3D video. It may impair the development of their eyes. yWarning about photosensitivity seizures - Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from a video game or movie. If anyone in your family has a history of epilepsy or has ever experienced any kind of seizure, please consult your doctor before viewing 3D images. If you experience one of the following symptoms while watching a 3D video, stop watching the 3D video immediately and take a rest. - Dizziness, twitching of the eye or facial muscles, involuntary movements, cramp, loss of consciousness, confusion, loss of sense of direction, or nausea. If the symptom does not disappear, please consult your doctor. yYou can reduce the risk of photosensitive seizures by taking the following preventive measures. - Take a rest of 5 - 15 mins. for every 1 hour of viewing. - If vision varies between each eye, correct the variation before beginning to watch a 3D video. - Ensure that the 3D video is directly in front of you, at eye level. - You should stop watching if you experience a headache, fatigue or dizziness. - Do not view 3D images when you are tired or ill. 3D FUNCTION CAUTION yExtra special care is required for children watching a 3D video. When Watching 3D Video yWatch 3D images within the optimum viewing angle and distance. yIf you are outside the viewing angle or distance, you may not be able to watch 3D images. You cannot view 3D images when you lie down. yYou may see left and right images overlapped during projector initialization after it is powered on. It may take some time for optimization. yIt may take some time for the 3D image look normal after you turn your eyes away from the screen and look back at the 3D image. yIt may flicker slightly while watching 3D images under a 3 wavelength lamp fluorescent light (50 Hz - 60 Hz) or near windows. If so, it is recommended to block the sun light with a curtain and to dim the lights. yThe 3D glasses must be DLP-LINK (DLP Ready) type. yYou may not be able to watch 3D properly if there is an obstacle between the projector and 3D glasses. yInstall the 3D projector as far as possible from other devices. 43 Please check the following when using 3D glasses. yDo not use 3D glasses as ordinary glasses, sunglasses or protective goggles. - If you do so, this may cause injury. yDo not store 3D glasses in very hot or very cold conditions. If you do, this may cause them to become distorted. Do not use distorted glasses. yDo not drop 3D glasses or allow them to come into contact with other objects. - This can result in damage to the product. yThe lenses of 3D glasses are easily scratched. Use a soft clean cloth when cleaning them. - Foreign particles on the cloth may cause scratches. yDo not scratch the surface of the 3D glasses' lenses with sharp objects or wipe them with chemicals. - If the lenses get scratched, images may not look normal when viewing 3D. yPlease use 3D glasses certified by LG Electronics. 44 3D FUNCTION Requirements for Watching 3D Images * Optimum viewing angle: Top/Bottom/Left/Right 9° Optimum viewing distance: Between 3 m and 5 m Recommended screen size: 101 cm * Basically, Watching 3D videos should be done in dark room environments only. * For 3D watching, set the energy saving mode to Minimum. NOTE yThe pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen. Therefore, the pairing with DLP-LINK glasses may not work properly if the light reflected from the screen is not bright enough, such as when the surrounding area is bright, the screen is big, or the maximum energy saving mode is enabled. ySome menus may not work while playing a 3D video. yYou can only watch a 3D video properly when the 3D video format option has been selected on the projector. 3D FUNCTION Please check the minimum system requirements for your computer. Minimum requirements are as follows: MicrosoftÂŽ WindowsÂŽ XP, Vista 32/64 bit ,Windows 7 32/64 bit IntelÂŽ Core 2 Duo or AMD Athlon⢠X2 CPU or higher More than 1 GB of system memory (2 GB recommended) Free space of 100 MB or more DirectX 9 or higher Video card should support 120 vertical frequency (Hz). Recommended video card requirements - Graphic Processor speed 700 MHz higher - Memory 512 MB higher yA laptop equipped with the chipsets above can be used but it may not work properly. 2 Set the video output to XGA 120 Hz and play a video ďŹle using a video player that supports 3D output. The following video players support 3D output: Stereoscopic Player, nVidia 3D Vision, and TriDef 3D. For more information on the players above, please visit their websites at: www.3dtv.com www.nvidia.co.kr www.tridef.com 45 46 3D FUNCTION To Use DLP-LINK (DLP-Ready) Type Glasses 1 While watching 3D images from the projector, press buttons on the glasses. 2 When you press the button, the glasses ďŹicker to be synchronized with the 3D images. (The ďŹickering is a unique operation method of DLP-LINK type glasses. It may be different depending on the glasses type.) 3 If the glasses ďŹicker or problems occur while watching 3D, ďŹrst turn the lights off to make the room darker. Contact your projector seller for queries about the glasses. Supported 3D input formats Input Signal Resolution Vertical Frequency (Hz) Supported 3D Formats HDMI XGA 1024 x 768 120 Frame Sequential / Frame Alternative RGB-PC XGA 1024 x 768 120 Frame Sequential / Frame Alternative yThe resolution supporting 3D mode is 1024 x 768 for HDMI and RGB input. ySome menus may not work in 120 Hz input. Watching 3D Images 1 Play supported 3D video titles. 2 For RGB-PC, you must press âSETTINGS PICTURE Screen Display (RGB-PC) Auto Config." on the remote control before watching 3D. 3 Press the 3D button. 4 While watching 3D images from the projector, press buttons on the glasses. 5 Press the L/R button to switch the playing direction of an image. Select a screen with better 3D display quality. yIf you press the 3D button during viewing, it returns to 2D. 6 If a 2D image is displayed on the 16:9 screen, a 3D image is also displayed at the aspect ratio of 16:9. For ratios other than 16:9, a 3D image is displayed in 4:3. yYou cannot change the screen size for 3D images. CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETUP Menu 1 Press the SETTINGS button. 2 Use the , , or button to select a desired item and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button. 4 When you ďŹnished, press SETTINGS. Menu Description PICTURE Adjusts the image quality for optimal viewing. AUDIO Adjusts the sound quality and volume level. TIME Sets the time and time-related features. CHANNEL Sets up and edit channels. LOCK Locks or unlocks channels and programs. OPTION Customizes the general settings. INPUT Selects the desired input source. MY MEDIA Accesses photo, music, movie, and document files. 47 48 CUSTOMIZING SETTINGS PICTURE Settings 1 Press the SETTINGS button. 2 Use the , , or button to select PICTURE and press the OK button. áŻ0RYHáŻ2. Ř (QHUJ\6DYLQJ 0HGLXP Ř 3LFWXUH0RGH 6WDQGDUG Ř &RQWUDVW , , or button to set up a desired item and press the OK button. Ř %ULJKWQHVV Ř 6KDUSQHVV Ř &RORU - To return to the previous menu, press the á°ł button. When you ďŹnished, press SETTINGS. Ř 7LQW 3 Use the 3,&785( 5 Ř $GYDQFHG&RQWURO Ř 3LFWXUH5HVHW The available picture settings are described as follows. Setting Energy Saving Picture Mode Description Reduces the power consumption by adjusting the screen brightness. Selects one of the preset images or customizes options in each mode for the best screen performance. You are also able to customize advanced options of each mode. Mode Vivid Standard Cinema Sport GAME Maximizes the visual effect of video. Displays a crystal clear picture by enhancing contrast, brightness, and sharpness. Has the contrast, brightness and sharpness at normal levels. Optimizes the image for movie. Optimizes the image for sports by emphasizing primary colors and dynamic actions. Optimizes the image for playing games on fast-moving screens. Expert Adjusts the detailed image settings. Increases or decreases the gradient of the video signal. CONTRAST BRIGHT- Adjusts the base level of the video signal to make the image brighter or NESS darker. Sharpness Adjusts the level of sharpness in the edge between the light and dark areas of the picture. The lower the level is, the softer the image looks. Color Adjusts the intensity of all colors. Tint Adjusts the balance between red and green levels. Advanced Customizes the advanced settings. Control CUSTOMIZING SETTINGS Setting Picture Reset Aspect Ratio Picture Wizard II Screen (RGB-PC) 49 Description Restores the options of each mode to the factory default. Changes the image size to view images at its optimal size. (See p.25) By following the instructions, using the remote control, you can easily adjust the picture quality to technical standards without needing an expensive pattern device or a picture quality expert. Adjusts the picture quality of RGB-PC input. Option Resolution Available resolutions are 768 resolution (1024 x 768/ 1280 x 768/ 1360 x 768, 60 Hz) and 1050 resolution (1400 x 1050/ 1680 x 1050, 60 Hz). Auto Provides optimized picture quality by automatically calibratConďŹg. ing the mismatch of horizontal width and picture shake caused by clashes between the internal settings of the projector and various PC graphic signals. yYou can also use the AUTO button on the remote control. Position Size Phase Reset Moves the image up/down/left/right. Changes the screen size. Makes the picture look clear by removing horizontal noise. Restores all the settings to the factory default. Advanced Control Setting Description Dynamic Contrast Dynamic Color Clear White Skin Color Adjusts the contrast to keep it at the best level according to the brightness of the screen. Adjusts screen colors so that they look natural. Makes the white area of screen look brighter and whiter. Detects the skin area of image and adjusts it to render a natural skin color. Reduces image noise. Noise Reduction Digital Noise Reduction GAMMA Black Level This option reduces the noise produced while creating digital video signals. Sets a gradation curve between video input and output signal. Compensates the brightness and contrast of a screen to balance with the black level of the video input. Not available for RGB-PC. 50 CUSTOMIZING SETTINGS Setting Real Cinema Color Gamut Description Provides the optimal picture quality for watching a movie. Selects the range of colors to display. yStandard: Displays the original colors of an input signal regardless of the display features. yWide: Sets to use the rich colors of the display. Edge EnProvides much sharper and clearer edges to the picture. hancer Expert Pattern This is a pattern used for expert adjustment. Color Filter Accurately adjusts color and tint by ďŹltering a speciďŹc color area of RGB space. White Peaking Adjust white color brightness. White peaking can be adjusted from 0 to 10. Adjust to higher setting to achieve brighter picture. Adjust to lower setting for darker picture. Color TemAdjusts the overall color of the screen to suit your preference. Select Warm, Cool or Medium. perature In Expert mode, you can customize the options of each mode. Gamma: Select 1.9, 2.2,or 2.4. a. Method: 2 points - Pattern: Inner, Outer - Contrast Red/Green/Blue, Brightness Red/Green/Blue: Adjustable range -50 - +50. b. Method: 10 points IRE - Pattern: Inner, Outer - IRE (Institute of Radio Engineers) is the unit that indicates the size of the video signal and can be set as either 10, 20, 30 - 90, or 100. You can ďŹne-tune for each setting as shown below. - Luminance: If you set up luminance for 100 IRE, a luminance value satisfying each gamma is automatically calculated for each step from 10 IRE to 90 IRE. - Red/Green/Blue: The adjustment range is -50 - +50. Color Manage- Adjusts Red/Green/Blue/Yellow/Cyan/Magenta colors. Allows an ment expert to adjust the tint using a test pattern. Six colors (Red/Green/ Blue/Cyan/Magenta/Yellow) can be selectively adjusted without affecting other colors. You may not see colors change on a normal picture even after adjustment. - Chroma Red/Green/Blue/Yellow/Cyan/Magenta, Tone Red/Green/Blue/Yellow/Cyan, Magenta: The adjustment range is -30 - +30 each. 51 CUSTOMIZING SETTINGS AUDIO Settings 1 Press the SETTINGS button. 2 Use the , , , buttons to select AUDIO $8',2 and press the OK button. Ř $XWR9ROXPH 2Q Ř &OHDU9RLFH,, 2IIá° 3 Use the , , or button to set up a desired item and press the OK button. áŻ0RYHáŻ2. Ř %DODQFH / Ř 6RXQG0RGH 6WDQGDUG - To return to the previous menu, press the á°ł button. When you ďŹnished, press SETTINGS. Ř ,QILQLWH6XUURXQG2II Ř 7UHEOH Ř %DVV Ř 5HVHW The available audio settings are described as follows. Setting Description Auto Volume Clear Voice II Automatically adjusts the volume level. Makes the voice from the projector crisp and clear. Balance Sound Mode InďŹnite Surround Treble Adjusts the balance of the left and right speakers. Adjusts sound. Option Standard Select when you want standard-quality sound. Music Select when you listen to music. Cinema Select when you watch movies. Sport Select when you watch sports events. Game Select when you play games. LG's unique sound option provides 5.1 channel stereo sound from two speakers. Adjusts the treble sound. Bass Adjusts the base sound. RESET Resets all the sound settings to the factory default. 52 CUSTOMIZING SETTINGS CHANNEL Settings 1 Press the SETTINGS button. 2 Use the , , or button to select CHAN- áŻ0RYHáŻ2. Ř $XWR7XQLQJ NEL and press the OK button. Ř 0DQXDO7XQLQJ 3 Use the , , or button to set up a desired item and press the OK button. &+$11(/ Ř &KDQQHO(GLW - To return to the previous menu, press the á°ł button. When you ďŹnished, press SETTINGS. The available channel settings are described in the following. Setting Auto Tuning Manual Tuning Channel Edit Description Tunes and stores all available channels through antennas or cable inputs. Tunes and stores the channels you want manually. Adds or deletes channels. CUSTOMIZING SETTINGS 53 TIME Settings 1 Press the SETTINGS button. 2 Use the , , or button to select TIME and press the OK button. áŻ0RYHáŻ2. Ř &ORFN Ř 2II7LPH 2II , , or button to set up a desired item and press the OK button. Ř 2Q7LPH 2II Ř 6OHHS7LPHU 2II Ř $XWR2II PLQ - To return to the previous menu, press the á°ł button. When you ďŹnished, press SETTINGS. Ř $XWRPDWLF6WDQGE\ KRXUV 3 Use the 7,0( The available time settings are described as follows. Setting Clock Off Time /On Time Description Sets the time, date, or Timer feature. Sets the time to turn on or off the projector automatically. To use this function, you should set the current time and date in advance. NOTE yIf you set both Off time and On time features to the same time, the Off time feature overrides the On time feature. yIf you do not press any button within 2 hours after the projector turns on by the On Time feature, the projector enters the Standby mode automatically. Sleep Timer Auto Off Automatic Standby Sets the length of time until the projector turns off. If there is no signal, the projector automatically turns off after the preset time has elapsed. If there is no press any button when Automatic Standby function is on, the Projector automatically switches to the standby mode. 54 CUSTOMIZING SETTINGS LOCK Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to LOCK and press OK. /2&. Ř 6HW3DVVZRUG Ř /RFN6\VWHP 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you ďŹnished, press SETTINGS. áŻ0RYHáŻ2. 2II Ř %ORFN&KDQQHO Ř 0RYLHUDWLQJ Ř 795DWLQJ&KLOGUHQ Ř 795DWLQJ*HQHUDO Ř 'RZQORDGDEOH5DWLQJ Ř .H\/RFN Ř ,QSXW%ORFN 2II The available lock settings are described in the following. Setting Description Set Password Changes the 4-digit password. The default PIN is â0 0 0 0â. If you forget your password, press â0-3-2-5â on the remote control. Lock System Activates or deactivates the lock system. Option Block Locks the selected channel. When you enter the Channel password for a locked channel, the channel is unlocked temporarily. Input Block Locks the selected input. Block Channel Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen blank and the audio is muted. Movie rating To watch a locked channel, enter the password. Blocks the movies that are only broadcasted on the projector and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating. Rating General audiences â All ages admitted PG Parental guidance suggested â Some material may not be suitable for children PG-13 Patents strongly cautioned â Some material may be inappropriate for children under 13 Restricted â Under 17 requires accompanying parent or adult guardian NC-17 No one 17 and under admitted. Adults only Blocking Off Permits all programs CUSTOMIZING SETTINGS Setting TV RatingChildren TV RatingGeneral 55 Description Blocks the childrenâs TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature. Rating Age Applies to TV-Y, TV-Y7 Fantasy Violence Applies to TV-Y7 Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). NOTE yThe V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children. Downloadable Rating Rating Age applies to TV-G, TV-PG, TV-14, TV-MA Dialogue (sexual dialogue) applies to TV-PG, TV-14 Language (adult language) applies to TV-PG, TV-14, TV-MA Sex (sexual situations) applies to TV-PG, TV-14, TV-MA Violence applies to TV-PG, TV-14, TV-MA This function operates only when projector has received Region5 Rating data. The name of the rating option may differ. NOTE yThis feature is available only for digital channels. Input Block Key Lock Block the input sources. This feature can be used to prevent unauthorized viewing by locking out the panel controls, so that it can only be used with the remote control. In Key Lock 'On', if the projector is turned off, press the Power button. With the Key Lock 'On', the display 'Key Lock' appears on the screen if any button on the panel is pressed while viewing the projector. 56 CUSTOMIZING SETTINGS OPTION Settings 1 Press the SETTINGS button. 2 Use the , , or button to select OPTION and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button. - To return to the previous menu, press the á°ł button. When you ďŹnished, press SETTINGS. 237,21 Ř Ř Ř Ř Ř Ř Ř Ř Ř Ř Ř Ř Ř /DQJXDJH 3-70RGH $XWR.H\VWRQH .H\6WRQH %ODQN,PDJH '0RGH $XWR,QSXW6HDUFK $XWR3RZHU +LJK$OWLWXGH &DSWLRQ 6WDQGE\/LJKW 'LY; 5 92' ,QLWLDO6HWWLQJ áŻ0RYHáŻ2. )URQW 2Q %OXH 2II 2II 2II 2II 2II The available option settings are described as follows. Setting Description Language Selects a desired Menu Language. PJT Mode This function turns the projected image upside down or ďŹips horizontal. ySelect Rear when projecting from the back of the transparent screen purchased separately. ySelect Ceiling when installing the product on the ceiling. yWhen PJT Mode is Rear/Front Ceiling, the left/right of the speaker changes automatically. Auto Keystone Auto Keystone provides a rectangular screen image by automatically adjusting the Keystone number when there is a trapezoidal screen image caused by tilting of the projector. Option Keystone Blank Image 3D Mode Auto Input Search ON Automatically adjusts the Keystone number. Off Manually adjusts the Keystone number. To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen. Selects a background for blank Image. (see page 27) Selects 3D mode. Automatically searches and displays an input signal type when it is received. CUSTOMIZING SETTINGS Setting Auto Power 57 Description Makes the projector turn on automatically when the adaptor plug is inserted. Option On When the DC plug is connected to the projector, it turns on automatically. Off When the DC plug is connected to the projector, it goes into standby mode. High Altitude If the projector is used at an altitude higher than 1200 meters, turn this on. Otherwise, the projector may overheat or its protection function may be activated. If this happens, turn the projector off and then on again after waiting for several minutes. Caption Sets whether to display captions and customize your option in each mode. Mode CC 1-4 (Closed Displays the audio portion of a TV program as text Captioning) on the screen. CC1 is the most common mode in use. Text 1-4 - Field 1 data channels: two Captions (CC1, CC2) and two Text (T1, T2). - Field 2 data channels: two Captions (CC3, CC4) and two Text (T3, T4). Service 1-6 This is only available for the digital broadcasting system. Option (For Digital Broadcasting) Size Selects the wordsize. Font Selects a typeface for the text. Text Color Selects a color for the text. Text Opacity Adjusts the opacity for the text color. Bg Color Adjusts the opacity for the text color. Bg Opacity Adjusts the opacity for the background color. Edge Type Selects an edge type. Edge Color Selects a color for the edges. 58 CUSTOMIZING SETTINGS Setting Standby Light Description Adjusts the LED button indicator. Option On When the buttons are touched, their indicators are all turned on at maximum brightness. In standby mode, all LED indicators are turned on at 20 % of the maximum brightness. Off When the buttons are touched, their indicators are all turned on at maximum brightness. In standby mode, all LED indicators are turned off. DivX(R) VOD sets DivX related settings. Initial Setting Resets all the projector settings to the factory default. MAKING CONNECTIONS 59 MAKING CONNECTIONS You can connect various external devices to the ports on the projector. Computer/Notebook DVD Video Digital Device USB Headphones Game Console 60 MAKING CONNECTIONS Connecting to an HD Receiver, DVD, or VCR Player Connect an HD receiver, DVD, or VCR player to the projector and select an appropriate input mode. Connecting to a PC The projector supports Plug & Play. A PC will automatically recognize the projector and requires no driver to be installed. RGB Connection HDMI Connection With an HDMI cable, you can enjoy high quality picture and sound. Press the INPUT button on the remote control to select HDMI. Connect the PC output and the PC video input port of the projector with the RGB cable. For audio signal, connect the PC and the projector with an optional audio cable. USB ě ë Ľ1 USB ě ë Ľ1 íě머ě Ready 3(PC) ěí ë/ěźě´ë¸ ě ë Ľ íě머ě Ready 3(PC) ěí ë/ěźě´ë¸ ě ë Ľ ě´ě´í° ěě HDMI ě ë Ľ 1(ARC) ěě(PC) ě ë Ľ ěěą ě ë Ľ (RGB/HDMI-PC) ě´ě´í° LAN 3(PC) ě° ě˘ ěě 1(ARC) HDMI ě ë Ľ ěě(PC) ě ë Ľ ěěą ě ë Ľ (RGB/HDMI-PC) LAN ě˘(ëŞ¨ë ¸)-ěěą-ě° ě¸ëś ě ë Ľ ě¸ëś ě ë Ľ ěť´íŹëí¸ ě ë Ľ ěť´íŹëí¸ ě ë Ľ ěě TRIGGER (12V) ě˘(ëŞ¨ë ¸)-ěěą-ě° TRIGGER (12V) ěěą ę´ëě§í¸ ěěąěśë Ľ ěëšě¤ ě ěŠ HDMI ě ë Ľ ě° ě˘ ěě 1(ARC) ěěą ę´ëě§í¸ ěěąěśë Ľ ěëšě¤ ě ěŠ ěě(PC) ě ë Ľ (R Accessories ěěą ě ë Ľ (RGB/HDMI-PC) Optional Extras +'0, RGB OUT (PC) AUDIO OUT MAKING CONNECTIONS USB ě ë Ľ1 íě머ě Ready 3(PC) ěí ë/ěźě´ë¸ ě ë Ľ ě´ě´í° ěě HDMI ě ë Ľ ěě(PC) ě ë Ľ ěěą ě ë Ľ (RGB/HDMI-PC) LAN ě¸ëś ě ë Ľ ě° ě˘ ěě 1(ARC) ě˘(ëŞ¨ë ¸)-ěěą-ě° TRIGGER (12V) ěť´íŹëí¸ ě ë Ľ ěěą ę´ëě§í¸ ěěąěśë Ľ ěëšě¤ ě ěŠ ěě(PC) ě ë Ľ (R Connecting to the AV INPUT ěěą ě ë Ľ (RGB/HDMI-PC) Connect the output ports of an external device and the AV INPUT port of the projector. Press the INPUT button to select AV. USB ě ë Ľ1 íě머ě Ready 3(PC) ěí ë/ěźě´ë¸ ě ë Ľ ě´ě´í° ěě 3(PC) ěěą ę´ëě§í¸ ěěąěśë Ľ You can connect the audio cable without using a gender as shown in the illustration above. ěě(PC) ě ë Ľ ěěą ě ë Ľ (RGB/HDMI-PC) LAN ěëšě¤ ě ěŠ HDMI ě ë Ľ AUDIO OUT 1(ARC) ě¸ëś ě ë Ľ ě° ě˘ ěě HDMI ě ë Ľ ě˘(ëŞ¨ë ¸)-ěěą-ě° TRIGGER (12V) ěť´íŹëí¸ ě ë Ľ RGB OUT (PC) 61 1(ARC) ěěą ě ë Ľ (RGB/HDMI-PC) 62 MAKING CONNECTIONS Component Connection You can enjoy vivid images when you connect an external device with a RGB IN port to the component port of the projector. Press the INPUT button on the remote control to select Component. Connecting to Headphones You can listen to the audio through a headphone. USB ě ë Ľ1 íě머ě Ready 3(PC) ěí ë/ěźě´ë¸ ě ë Ľ ě´ě´í° ěě íě머ě Ready 3(PC) ěí ë/ěźě´ë¸ ě ë Ľ ě´ě´í° TRIGGER (12V) ěť´íŹëí¸ ě ë Ľ ěě ěě ěěą ę´ëě§í¸ ěěąěśë Ľ ěěą ě ë Ľ (RGB/HDMI-PC) ěť´íŹëí¸ ě ë Ľ LAN ě¸ëś ě ë Ľ 5LJKW $8',2287 ě° ě˘ ěě ě¸ëś ě ë Ľ ěëšě¤ ě ěŠ /HIW $9287 ěě(PC) ě ë Ľ HDMI ě ë Ľ ě¸ëś ě ë Ľ ě° 1(ARC) ě˘(ëŞ¨ë ¸)-ěěą-ě° ěě ě˘(ëŞ¨ë ¸)-ěěą-ě° ě˘ ěěą ę´ëě§í¸ ěěąěśë Ľ HDMI ě ë Ľ ě˘(ëŞ¨ë ¸)-ěěą-ě° TRIGGER (12V) USB ě ë Ľ1 ě´ě´í° ěëšě¤ ě ěŠ 1(ARC) ěě(PC) ě ë Ľ ěěą ě ë Ľ (RGB/HDMI-PC) LAN MAINTENANCE MAINTENANCE Clean your projector to keep it in optimum condition. Cleaning the Projector Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens. To remove dust or stains, use an air spray or apply a small amount of cleaning agent onto a swab or soft cloth to lightly rub the lens. Please be aware that liquid may ďŹow onto the lens if the product is sprayed directly onto the lens. Cleaning the Projector Case To clean the projector case, ďŹrst unplug the power cord. To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish the lens. Do not use alcohol, benzene, thinners or other chemicals, which may damage the case. 63 64 SPECIFICATIONS SPECIFICATIONS MODELS Resolution (Pixel) Aspect ratio Panel size (mm) Projection distance (Video size) Ratio of upward projection Working range of the remote control Video input AC-DC Adaptor 19.5 V Audio Output Television System Program Coverage External Antenna Impedance Height (mm) Width (mm) Depth (mm) Weight (g) USB Device Operation environment HECTO-NA 1920 (Horizontal) Ă 1080 (Vertical) 16:9 (Horizontal:Vertical) 14.515 0.53 m (2.54m) 123 % 6m NTSC, ATSC , 4.62 A (Adaptor Input 100 ~ 240 @ 50 Hz/60 Hz) 1W+1W DTV-ATSC / TV-NTSC VHF 2 - 13, UHF 14 - 69, CATV 1 - 135, DTV 2 - 69, CADTV 1 - 135 75 Ί (VHF/ UHF) 145 (without foot), 156.1 (with foot) 546.3 406.6 14.1 5 V, 0.5 A (Max.) Temperature Operation Storage Relative Humidity Operation Storage 0 °C - 40 °C -20 °C - 60 °C 0 % - 80 % 0 % - 85 % SPECIFICATIONS Supported Monitor Display 65 HDMI/DVI-DTV supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Resolution 640*350 31.468 70.09 720*400 31.469 70.08 640*480 31.469 59.94 800*600 37.879 60.31 1024*768 48.363 60.00 119.99 1152*864 54.348 60.053 1280*800 49.68 60 1360*768 47.712 60.015 1280*1024 63.981 60.020 1400*1050 65.317 59.979 1680*1050 65.3 60 yIf an invalid signal is input into the projector, it will not be displayed properly on the screen or a message such as âNo Signalâ or âInvalid Modeâ will be displayed. yThe projector supports the DDC1/2B type as the Plug & Play function (Auto-recognition of PC monitor). yPC synchronization signal types supported: Separate type synchronization. yIn PC mode, 1280 x 800 is recommended for the best picture quality. Horizontal Frequency (kHz) Vertical Frequency (Hz) 720*480 31.469 31.5 59.94 60 720*576 31.25 50 1280*720 37.5 44.96 45 50 59.94 60 1920*1080 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.94 60 Component port connecting information Signal Component 480i / 576i 480p / 576p 720p / 1080i 1080p (50 Hz / 60 Hz only) 66 SPECIFICATIONS Open Source Software Information To obtain the source code under the GPL, LGPL, MPL and other open source licenses, which is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. If you send an email to opensource@lge. com to request for the softwareâs open source code installed into the projector within three years of purchase, we will send you a CD-ROM. You will only be charged a minimum for packaging and delivery. The model and serial number of the projector are located on the back or on the side of the projector. Record them below should you ever need service. MODEL SERIAL
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2013:01:03 18:57:14+09:00 Modify Date : 2013:01:03 18:57:14+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2012:12:26 10:07+09:00 Format : application/pdf Title : Microsoft Word - G_User_s manual.doc Creator : Administrator Producer : Acrobat Distiller 9.5.2 (Windows) Document ID : uuid:70919358-7d00-43d6-b940-ae7c900366cf Instance ID : uuid:30cb4f6b-0b54-4ba9-9706-0d71c88cce88 Page Count : 68EXIF Metadata provided by EXIF.tools