LG Electronics USA HFB300 Bluetooth Speaker Phone User Manual User s manual HFB300
LG Electronics USA Bluetooth Speaker Phone User s manual HFB300
Users Manual
BLUETOOTH SPEAKER PHONE HFB-300 User's Manual THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION IMPORTANT NOTE : TO COMPLY WITH THE FCC RF EXPOSURE COMPLIANCE REQUIREMENTS, NO CHANGE TO THE ANTENNA OR THE DEVICE IS PERMITTED. ANY CHANGE TO THE ANTENNA OR THE DEVICE COULD RESULT IN THE DEVICE EXCEEDING THE RF EXPOSURE REQUIREMENTS AND VOID USER'S AUTHORITY TO OPERATE THE DEVICE. Introduction LG Speaker Phone HFB-300 can be linked to any device with Bluetooth wireless technology that supports the Hands free & headset profile. This product can be used as a Hands free in a car, a conference call, and a speaker phone at home or office. Included package Bluetooth Speaker Phone User's Manual Additional Information VPC (Vehicle Power Charger) Holster case Part description Front Back Configuration Car Fit the HFB-300 in the Holster case, and fix the sun visor clip into the fixing groove of the Holster case. Then, place the HFB-300 on the sun visor toward the driver's side. User can use the HFB-300 as a hands free. Home or Office User can use HFB-300 as a conference call, and also as a speaker phone. Start After you open the box package, please make sure the HFB-300 be fully charged before use. 1. Open the Power Connector Outlet cover. 2. Connect the supplied charger to Power Connector Outlet f HFB-300. ●When charger plugged, the LED light of HFB-300 is RED color. ●When being fully charged, the LED light of HFB-300 is changed to GREEN color.(It may take 3 hours to charge HFB-300 fully.) Tip The low battery will be alarmed by a beep sound in every 30 seconds. Immediate charging will be required right after the low battery alarm. Power on Press and hold Call/Power Button for more than 2 seconds, when HFB-300 is turned off. ●When you hear a consecutively raised sound, the power of HFB-300 is turned on. Power off Press and hold Call/Power Button for more than 3 seconds, when HFB-300 is turned on. ●When you hear a consecutively lowered sound, the power of HFB-300 is turned off. How to use Bluetooth Pairing 1. After being turned on HFB-300, press and hold Function button for more than 3 seconds. ●After melody, the blue LED will flicker once a second. 2. With the Bluetooth enabled handset, search for HFB-300 and then register it. ●Please refer to the user manual of the handset. ●When asked for PIN code during the procedure, enter "0000" as the password. ●When the pairing procedure is done, you can hear a beep sound and see flicking blue LED every 4~5 seconds. ●If the LED flickers once a second, user have to try again for pairing from the beginning.0 Adding Multiple handset ●HFB-300 stores up to 3 different handsets in memory. ●In case of adding a 4th handset, the oldest unused registration will be automatically removed. ●When you want to change the priority, try to connect manually from the handset. ●If the latest paired handset supports Hands free profile, handset will automatically connect with HFB-300. Tip Once HFB-300 is registered to HFB-300, it will be stayed in paired status until deleted. Answering a call When handset is an incoming call, a melody will come out of HFB-300 and the blue LED will flicker rapidly 4 times. Press Call/Power Button while the handset is ringing. ●HFB-300 is available to start conversation. Last number / Voice dialing To make last number call, press Call/Power Button shortly (with beep sound once). ●In some cases of Bluetooth enabled handset, user need to press Call/Power Button twice. To activate Voice dialing, press and hold Call/Power Button little bit longer (with two beep sounds in a row). ●It's possible to use this function only when the user's handset supports. Ending a call To finish calling, press Call/Power Button. Call Waiting To receive a second call while answering the first call, press and hold Call/Power Button for more than 2 seconds. To get back to the first call, just press and hold Call/Power Button again. Speaker Volume Control Press Volume (+) Button to increase the speaker sound, and press Volume (-) Button to decrease. ●The volume level runs from 1 to 8. Microphone Volume Control Press Function with Volume (+) Button simultaneously to increase the Microphone volume, and press Function Volume (-) Button longer at the same time to decrease the Microphone volume. ●The volume level runs from 1 to 4. ●Whenever changing Microphone volume level, user can hear serial sound according to the level of the volume. (ex. Level 1 : sound once, Level 2 : sound twice, and so on.) Mute Function for Microphone To make mute Microphone during an active call, press Function Button shortly. When Function Button pressed again, Mute function is just cancelled. Transferring Audio Handset =>HFB-300 When user want to transfer Audio from handset to HFB-300 while calling, press Call/Power Button. ●The calling will be transferred to HFB-300 without ending a call. HFB-300 =>Handset Transferring Audio from HFB-300 to handset should be operated in handset, and the way to make it may be different from handset by handset. ●Refer to the manual of user's handset to use this function. Using Earphone 1. Open the Earphone Jack cover. ●Be careful to use sharp materials or the nail and other parts of user's body to open the cover. ●It's possible that using above methods may harm the surface of HFB-300 and hurt a part of user's body. 2. Put in the jack of the supplied earphone to the Earphone Jack of HFB-300. ●You can make conversation with the earphone automatically without any key press. Holding key Push the Hold Switch in the side of lock to disable all buttons Summary of Button functions Summary of Button Functions Function HFB-300 Status Power On Off Power Off On Speaker Volume + Speaker Volume - MIC Gain Up MIC Gain Down MIC Mute Transferring Audio (Handset => HFB-300) Talking Keep press Call/Power Button for more than 2 seconds Keep press Call/Power Button for more than 3 seconds Press Volume (+) Button Press Volume (-) Button Press Function + Volume (+)Button simultaneously longer Press Function + Volume (-) Button simultaneously longer Press Function Button shortly Talking Press Call/Power Button Pairing Mode On Answering a Call Ending a Call Ringing Talking Last Number Calling Ready Voice Dialing (When handset Ready How to use button Keep press Function Button for more than 3 seconds Press Call/Power Button Press Call/Power Button Press Call/Power Button shortly (with beep sound once) Keep press Call/Power Button little bit longer supports) Reset Holding Keys Answer another call Call swapping Talking Talking (with two beep sounds in a row) Press Reset Button Put Hold Switch to the side of lock Press Call/Power Button longer Press Call/Power Button longer Trouble Shooting Check if the battery of the HFB- Charge the battery. 300 is fully discharged. Does not turn on. Press Call/Power Button for Check if Call/Power Button was more than 3 seconds to turn not pressed long enough. on. Check whether the Hold Switch on Switch to OFF position. the HFB-300 is ON. In order to make conversation with HFB-300, Check if the handset supports you need a Bluetooth Hands free profile. handset supporting Hands Can not make free profile. conversation through the HFB-300 Check if the battery of the HFBCharge the battery. 300 is low. Check if the MIC is in MUTE or the Cancel MUTE or Volume up lowest volume level. the MIC. Can not pair HFB- Check if the power of the 300 300 is with the Bluetooth turned off. device. No sound from the speaker HFB- Press Call/Power Button for more than 3 seconds and turn on the unit Check if the Bluetooth device to be Turn on the power. paired is turned off. Check if a earphone is plugged Remove earphone from the into the HFB-300. HFB-300. Does not work any button Push Reset Button with a tip. LED Indication Function HFB-300 Status Power off Booting Operating(Blue LED) LED Status LED Off LED On completed until initialization Idle On (0.5 sec) - Off (10 sec) repeatedly Discoverable On (1 sec) - Off (1 sec) repeatedly until discovered Connecting Ringing SCO Connection MIC ON MIC Mute Flickering connected repeatedly until Flickering (3 times) & Off (2 sec) repeatedly until answered On On (0.5 sec) - Off (0.5 sec) repeatedly Charging (Red/Green LED) No Charging Red LED - Off / Green LED – Off Charging Red LED - On / Green LED - Off Full Charged Red LED - Off / Green LED - On Precautions Do not drop the unit. Do not modify, repair & take apart at discretion. Do not expose directly to the water, alcohol, benzene, etc. for cleaning. Do not expose directly to flammables. Do not place or keep the unit near the flammables. ● It may cause an explosion. Keep unit away from humidity & dust. Do not place the heavy objects on the unit. Keep away from direct light or heat. ●Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ● Risk of explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Specifications ITEM DESCRIPTION Bluetooth Specification Ver 1.2 Supported Profile Hands free / Headset profile Rx. Sensitivity Battery Typ. -72 dBm 3.7V, 950mAh Li-ion Speaker 8Ω / 0.5W (normal) MIC -42dB / Omnidirectional Standby Current ≤3mA (Avg.) Talking Current 110+/-5mA (Avg.) Standby Time(Sniff Mode) ≥600 hrs Talking Time ≥8 hrs Operating Temperature -20℃ ~ 60℃ Dimension 63(W) x 93.5(L) x 24.5(H)mm Guidelines for safe and efficient use Note : Read this information before using LG HFB-300 Speaker Phone. Any changes or modification to this product not approved by LG Electronics may void the user's authority to operate the speaker phone. Please check for any exception, due to national requirements or limitations, in usage of Bluetooth equipment before using this product. Product care Please note only LG Electronics service partners should remove or replace the battery. Do not expose your product to liquid or moisture or to humidity. Do not expose your product to extreme high or low temperature. Do not expose your product to lit candles, cigarettes, or cigars, or to open flames etc. Do not drop, throw or try to bend the products as rough treatments could damage it. Do not use any other accessories than LG Electronics original parts for use with this product. Use of non-original accessories may result in loss of performance, damage to the product, fire, electric shock or injury. The warranty does not cover product failures which have been caused by use of non-original accessories. Do not attempt to disassemble your product. The product does not contain consumer serviceable or replaceable components. Only LG Electronics service partners should perform service. Do not keep the product in an area prone to dust and dirt. Only use a soft damp cloth to clean your product. If you will not be using the product for a while, store it in a place that is dry, free from damp, dust and extreme temperatures. Radio frequency exposure This Bluetooth Speaker Phone, LG HFB-300, is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to 2.4835 GHz. The output power of the radio transmitter is low, 0.001 watt. Your Bluetooth Handsfree is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used any compatible LG Electronics mobile phone. Driving Check the laws and regulations on the use of mobile phones and hands free equipment in the areas where you drive. Always pay full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. RF energy may affect some electronic systems in motor vehicles such as car stereo, safety equipment etc. Check with your vehicle manufacturer's representative to be sure that your mobile phone or Bluetooth Hands free will not affect the electronic systems in your vehicle. Electronic equipment Most modern electronic equipment is shielded from RF energy. However certain electronic equipment is not, therefore: Do not use your Bluetooth Speaker Phone near medical equipment without requesting permission. If you are using any personal medical devices, e.g. a pacemaker or a hearing aid, please read in your mobile phone's User's Guide for further information. Aircraft Turn your Bluetooth Speaker Phone OFF before boarding any aircraft. To prevent interference with communication systems, you must not use your Bluetooth Speaker Phone while the plane is in the air. Blasting areas Turn off all your electronic devices when in a blasting area or in areas posted turn off two-way radio to avoid interfering with blasting operations. Construction crews often use remote control RF devices to set off explosives. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. Power Supply Connect the AC power adapter only to designated power sources as marked on the product. To reduce risk of damage to the electric cord, remove it from the outlet by holding onto the AC adapter rather than the cord. Make sure the cord is positioned so that it will not be stepped on, tripped over or otherwise subjected to damage or stress. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. The AC power adapter must not be used outdoors or in damp areas. Danger : Never alter the AC cord or plug. If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician. Improper connection can result in risk of electric shock. Placing LG Electronics recommends that the Bluetooth Speaker Phone is worn in positions where it will not be subject to pressure since such pressure may result in bodily injury or damage to the product. Children Do not allow children to play with your Bluetooth Speaker phone since it contains small parts that could become detached and create a choking hazard. Emergency calls IMPORTANT! This Bluetooth Speaker Phone and the electronic device connected to the speaker phone operate using radio signals, cellular and landline networks as well as user-programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e.g. medical emergencies). Remember, in order to make or receive calls, the Speaker phone and the electronic device connected to the Speaker phone must be switched on and in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider Battery information A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +55℃ (+131℉ ) or under –15℃ (+5℉ ). For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10℃ (+50℉ ) and +45℃ (+113℉). Recycling the battery in your Bluetooth headset The battery in your Bluetooth Speaker phone must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner removing battery will dispose of it according to local regulations. Limited Warranty Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer with the original purchase receipt from whom it was purchased or contact your local LG Electronics contact center to get further information. What we will do If, during the warranty period, this product fails to operate under normal use and service, due to defects in materials or workmanship, the LG Electronics authorized distributors or service partners will, at their option, either repair or replace the product in accordance with the conditions stipulated herein. Conditions 1. The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer. 2. If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics. 3. This Warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God or damage resulting from liquid. 4. This warranty does not cover product failures due to improper repair installations, modifications or service performed by a non-LG Electronics authorized person. 5. Tampering with any of the seals on the product will void the warranty. 6. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumer's statutory rights under applicable national legislation in force, nor the consumer's rights against the dealer arising from their sales/purchase contract.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 14 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:5529b497-ae5a-4a1a-a971-7d841fb5c8dd Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2005:07:28 16:16:24+09:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2005:07:28 16:16:24+09:00 Document ID : uuid:d81ad4d4-8b33-481e-ad37-c6d310d93875 Format : application/pdf Title : Microsoft Word - User's manual HFB300.doc Creator : Uon-Chae.Song Author : Uon-Chae.SongEXIF Metadata provided by EXIF.tools