LG Electronics USA HX300GJE DLP PROJECTOR User Manual SAC30666017 Eng indd

LG Electronics USA DLP PROJECTOR SAC30666017 Eng indd

Contents

User Manual 2

Function281. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ buttons to move to Auto Power and press the 󱡧OK button.3. Press the ġ, Ģ buttons to move to On and press the 󱡧OK button.• On: Connecting DC cable to the projector turns on the projector.• Off: Connecting DC cable to the projector makes the projector in standby state.• Press the BACK button to exit the menu screen.To make the power of the projector turn on automatically when power is inOPTIONMenu Language : EnglishBlank Image : BlackScreen CaptureLED Mode : NormalAuto Power : OffDemo Mode : OffInitial Setting : Home Use1. Press the Q.MENU button on the remote control.2. Press the ˘, ˚buttons to move to LED Mode.3. Move to a desired item with the ˘, ˚ buttons.• LED Mode changes into Dimming mode automatically at specific temperatures (35°C or higher). Dimming mode gets about 90% brightness of original led mode.• LED Mode changes into Dimming mode automatically if use a optical battery.• You can use this function through the MENU button.• Press the BACK button to exit the menu screen.To adjust the brightness of the screenᰰMove ᰷OKLED ModeNormal1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ buttons to move to Screen Capture and press the 󱡧OK button.• It can only be elected when there is an input signal.• It takes up to 2 minutes when capturing screen.• Press the BACK button to exit the menu screen.Screen Capture FunctionOPTIONMenu Language : EnglishBlank Image : BlackScreen CaptureLED Mode : NormalAuto Power : OffDemo Mode : OffInitial Setting : Home UseᰰMove ᰷OK
Function29INFORMATION Menu Options1. Press the MENU button. Then, move to INFORMATION with the ġ, Ģ, ˘, ˚ buttons and press the 󱡧OK button.2. You can see the current information of the projector.• Press the BACK button to exit the menu screen.To See The Projector Information1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ buttons to move to Demo Mode and press the 󱡧OK button.3. Press the ġ, Ģ buttons to move to On and press the 󱡧OK button.• It can be selected when Initial Setting is set as Store Demo.• Press the BACK button to exit the menu screen.1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ buttons to move to Initial Setting and press the 󱡧OK button.3. Move to a desired item with the ġ, Ģbuttons and then press the 󱡧OK button.• Set as Home Use when used in homes.• Press the BACK button to exit the menu screen.OPTIONMenu Language : EnglishBlank Image : BlackScreen CaptureLED Mode : NormalAuto Power : OffDemo Mode : OffInitial Setting : Store DemoOPTIONMenu Language : EnglishBlank Image : BlackScreen CaptureLED Mode : NormalAuto Power : OffDemo Mode : OffInitial Setting : Home UseINFORMATIONModel Name : HX300G-JEInput : RGBResolution : 1024 x 768Fh/Fv : 48.36 Hhz/60 HzᰰMove ᰷OKᰰMove ᰷OKInitial Setting FunctionDemo Mode Function
USB30* When you connect a USB device, this screen is displayed, automatically.In USB device, you can not add a new folder or delete the existing folder.USBTo use the USB device* Image shown may differ from your projector.Connecting the USB device1. Connect the USB device to the USB jack on the back of the set. 2. It turns automatically to DivX Home Menu.* Select “Eject” in order to eject a USB device.Eject USBUSB memory stickPHOTO LISTMUSIC LIST MOVIE LIST FILE VIEWER1. Press the Q.MENU button on the remote control.2. Press the ˘, ˚ buttons to move to USB Device.3. Press the 󱡧OK button on the remote control.• After Eject USB, USB memory cannot be read. Remove USB memory, and connect again.• Press the BACK button to exit the menu screen.USB DeviceEject ᯙ
USB31Precautions when using the USB device Ź Only a USB storage device is recognizable. Ź If the USB storage device is connected through a USB hub, the device is not recognizable. Ź A USB storage device using an automatic recognition programmed may not be recognized. Ź A USB storage device which uses its own driver may not be recognized. Ź The recognition speed of a USB storage device may depend on each device. Ź Please do not turn off the projector or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. Ź Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files, movie files or text files. Ź Please use only a USB storage device which was formatted as a FAT16, FAT32 and NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility programmed which is not support-ed by Windows, it may not be recognized. Ź Please connect power to a USB storage device which requires an external power supply. If not, the device may not be rec-ognized. Ź Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. Ź Some USB storage devices may not be supported or operated smoothly. ŹIf the name of a folder or file is too long, it will not be displayed or recognized. Ź File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters. Ź Please backup the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage. Ź The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory. Any device with more than the recommended capacity may not work properly. Ź Only the FAT32 file system supports the delete function. ŹIf the USB memory device does not work properly, disconnect and reconnect it. Ź If a USB external hard disk with a “Energy Saving”function does not work, turn the hard disk off and on again to make it work properly. ŹUSB storage devices below USB 2.0 are supported as well.But they may not work properly in the movie list. Ź If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. ŹIf a USB memory device is connected to a USB multi-card reader, its volume data may not be detected. Ź How fast a USB memory device is detected differs from device to device. ŹIf the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the projector is turned on. ŹSome USB storage devices may not be supported or operated smoothly. Ź If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source.- Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.
USB32ᰰNavigation ᰷PopUp Menu ᳉ Page Change ᲣMark ᱷExitPHOTO List* It is available to playback the photo file(*.jpg) in the USB device.The On Screen Display may be different from your set. Images are an example to assist with the projector operation.PHOTO(*.JPEG) supporting fileBaseline : 64 x 64 ~ 15360 x 8640Progressive : 64 x 64 ~ 1920 x 1440• You can play JPEG files only.• Non-supported files are displayed in the form of predefined icon.Screen ComponentsPhoto Selection and Popup Menu1. Moves to upper level file2. Preview: Display the thumbnail/folder name of the photo in the selected folder3. Current page/Total pages4. Total number of marked photos5. Corresponding buttons on the remote control1. Press the USB button. Then, move to PHOTO LIST with the ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ, ˘, ˚buttons to move to a desired photo file and press the 󱡧OK button.3. Move to a desired item with the ġ, Ģbuttons and then press the 󱡧OK button.• If the picture file is damaged, it may not be displayed properly.• High resolution pictures may take longer time to display on the entire screen.Page 1/1No MarkedPhoto List1366x768 125KBᰰNavigation ᰷PopUp Menu ᳉ Page Change ᲣMark ᱷExitButterflyUp FolderPhotoX.BoxDSC0001DSC0002DSC0003DSC0004213 45Page 1/1No MarkedPhoto ListUp Folder1366x768 125KB[090704]ButterflyUp FolderPhotoX.BoxDSC0001DSC0002DSC0003DSC0004i 1366x768, 125KBView Mark AllDeleteClose• View: Display the selected item. • Mark All: Mark all photos on the screen.• Delete: Delete the selected photo item.• Close: Close the pop-up menu.[090704]Up Folder
USB33Full Screen Menu1. Press the USB button. Then, move to PHOTO LIST with the ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ, ˘, ˚ buttons to move to desired photo and press the 󱡧OK button.3. Press the ġ, Ģ buttons to move to View and press the 󱡧OK button.4. The selected photo is displayed in full size and show up the menu.5. Use ġ, Ģ, ˘, ˚ button to select and control the menu on the full-sized screen.Slideshow BGM Delete Option Hide• Use ˘, ˚ button to select the previous or next photo. • Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show.- Set the time interval of the slide show in Option.• BGM: Listen to music while viewing photos in full size.- Set the BGM device and album in Option.• (Rotate): Rotate photos.• Delete: Delete photos.• Option: Set values for Slide Speed and Music Folder.- You cannot change Music Folder while BGM is playing.• Hide: Hide the menu on the full-sized screen.- To see the menu again on the full-sized screen, press 󱡧OK button to display.
USB34ᰰNavigation ᰷PopUp Menu ᳉ Page Change ᲣMark ᱷExitMUSIC List* You can use the Music List menu to play MP3 files form a USB storage device. The On Screen Display on your model may be slightly different.1. Moves to upper level file2. Preview: Display the title/folder name of the music in the selected folder3. Current page/Total pages4. Total number of marked music5. Corresponding buttons on the remote controlPage 1/1No MarkedMusic Listᯫ 00:00 / 05:42Drive 1Flower Up FolderObliviousFlower05:2405:42213 4MUSIC (*.MP3) supporting fileBit rate range 32 Kbps ~ 320 Kbps• Sampling rate MPEG1 Layer3 : 32kHz, 44.1kHz, 48kHz• Sampling rate MPEG2 Layer3 : 16kHz, 22.05kHz, 24kHz• Sampling rate MPEG2.5 Layer3 : 8kHz, 11.025kHz, 12kHz5Up FolderMusic Selection and Popup Menu1. Press the USB button. Then, move to MUSIC LIST with the ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ, ˘, ˚ buttons to move to a desired music file and press the 󱡧OK button.3. Move to a desired item with the ġ, Ģ buttons and then press the 󱡧OK button.Page 1/1No MarkedMusic ListUp Folderᯫ 00:00 / 05:42Drive 1Arirang Up FolderGood ByeArirang05:3004:12i 3945 KB,128 KbpsPlay Play with PhotoMark AllDeleteClose• Play: Once a song finishes playing, the next selected one will be played. When there are no selected music to play, the next one in the current folder will be played. If you go to a different folder and press the 󱡧OK button, the current music in playback will stop.When music is playing, is displayed in front of the music play time. After certain time elapsed,the full music list screen disappears and the playback information screen which is on the top of the music list runs as a screen saver. Press 󱡧OK, ▇ , or BACK button to stop the screen saver. A damaged or corrupted music file that does not play displays 00:00 as the play time.Music files with copy-protection will not play.• Play with Photo: Start playing the selected music and then move to the Photo List.• Mark All: Mark all music in the folder.• Delete: Delete the selected music.• Close: Close the pop-up menu.ᰰNavigation ᰷PopUp Menu ᳉ Page Change ᲣMark ᱷExitTitle DurationTitle DurationScreen Components
USB35MOVIE List* The movie list is activated once USB is detected. It is used when playing movie files on projector.Supported Movie FileExtension name Video Codec Audio CodecMax Resolutionmpg, mpeg, vob MPEG1, MPEG2 Dolby Digital,MPEG,MP3,LPCM1920x1080@30pdat MPEG1 Dolby Digital,MPEG,MP3,LPCMts,trp,tp MPEG2, H.264/AVC Dolby Digital,AAC,MPEGmp4MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12, Dvix 5.xDvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03Xvid 1.10–beta 1, Xvid 1.10-beta 2, H.264/AVCDolby Digital,HEAAC,AAC,MPEG,MP3,LPCMaviMPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4Divx 5, Divx 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03Xvid 1.10–beta 1, Xvid 1.10–beta 2, H.264/AVCDolby Digital,HEAAC,AAC,MPEG,MP3,LPCMmkv H.264/AVC, MPEG 1, MPEG 2, MPEG 4 SP, MPEG4 ASP Dolby Digital,HEAAC,AAC,MPEG,MP3,LPCMdivxMPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4Divx 5, Divx 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03Xvid 1.10–beta 1, Xvid 1.10–beta 2, H.264/AVCDolby Digital,HEAAC,AAC,MPEG,MP3,LPCMBit rate range : within 32 kbps ~ 320 kbps (MP3)Subtitle format : *.smi/*.srt/*.sub(MicroDVD, SubViewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivx)
USB36Precautions when playing the DivX ŹA DivX movie file and its subtitle file must be located in the same folder. ŹAt this time, a movie file name and its subtitle file name must be identical for it to be displayed. ŹSpecific subtitles created by the user may not be operated normally. ŹSome special characters are not supported in subtitles. ŹHTML tags are not supported in subtitles. Ź Subtitles in languages other than the supported languages are not available. ŹTime information in an external subtitle file should be arranged in ascending order to be played. ŹDamaged movie files may not be played, and certain functions could be limited during the playback. ŹCertain video files created with an encoder may not be played. ŹIf the video and audio structure of recorded file is not interleaved, either video or audio is outputted. Ź Video with resolution higher than maximum resolution supported for each frame, cannot be guaranteed for smooth playback. ŹDTS Audio codec is not supported. ŹPlayback for movie file exceeding 30 GB (Giga Byte) is not supported. ŹPlaying a video through a USB connection that doesn’t support high speed may not work properly. ŹWhen watching a video using MOVIE LIST, the function to ajdust screen deos not work. Ź The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed. ŹMovie files other than the specified types and formats may not work properly. ŹMax bitrate of playable movie file is 20Mbps. ŹFiles encoded with GMC(Global Motion Compensation) may not be played. Ź When you are watching the movie by Movie List function, user setup for each image mode does not operate. ŹOnly the files saved in ASCII CODE is supported for the external subtitles of the movie. ŹOnly 500 alphabets and 500 numbers are supported for each line of the subtitle. ŹOnly 10000 of sync blocks can be supported within the subtitle file.ᰶ ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.ᰶ ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.ᰶ "DivX Certified to play DivX video up to HD 1080p, including premium content" ᰶ "Pat. 7,295,673; 7,460,688; 7,519,274Manufactured under license from Dolby Laboratories. “'ROE\ “and the double-D symbol are trademarks of Dolby Laboratories.
USB371. Moves to upper level folder2. Preview: Display the title/folder name of the movie in the selected folder3. Current page/Total pages4. Total number of marked movies5. Corresponding buttons on the remote controlUp FolderPage 1/1No MarkedMovie List704 x 396 668 MBMovieUp FolderUp FolderPage 1/1No MarkedMovie List704 x 396 668 MBMovieUp FolderMovie Selection and Popup MenuScreen Components23 451i 704 x 396 668 MBPlay Mark AllDeleteClose1. Press the USB button. Then, move to MOVIE LIST with the ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ, ˘, ˚move to a desired movie file and press the 󱡧OK button.3. Move to a desired item with the ġ, Ģbuttons and then press the 󱡧OK button.• Play: Play the selected movie titles. - In the case of files not supported, a message regarding non-supported file is displayed.- The screen is played, but when the audio file is not supported, the following message shows.• Mark All: Mark all movies in the folder.• Delete: Delete the selected movie.• Close: Close the pop-up menu.iThis file is invalid.iUnsupported Audio.ᰰNavigation ᰷PopUp Menu ᳉ Page Change ᲣMark ᱷExitᰰNavigation ᰷PopUp Menu ᳉ Page Change ᲣMark ᱷExitTitle DurationTitle Duration
USB38Option Menu SelectionPlaying the Movie1. Press the USB button. Then, move to MOVIE LIST with the ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ, ˘, ˚move to a desired movie file and press the 󱡧OK button.3. Press the ġ, Ģbuttons to move to Play and press the 󱡧OK button. On MOVIE LIST play mode. Press the (RED) button on the remote control. * You can adjust various method during the movie play.◆ Use of remote control ᰶ Press the ▶II (Play/Pause) button to play/pause the screen. ᰶ Press the ▇ (Stop) button to stop. ᰶ Press the I◀◀ (Skip -) button to play the previous movie. ᰶ Press the ▶▶I (Skip +) button to play the next movie.ᰶPicture Size: Select the Full or Original screen size. ᰶPicture Mode: Select the Vivid, Standard, Cinema, Sport or Game.ᰶ Audio Language: Select Language Group of the audio during movie play.ᰶ Subtitle Language: Select Language Group of the subtitle during movie play. - Sync: When the video is not synchronized with the caption, it can be adjusted by the unit of 0.5 second. - Position: Move the location of the subtitle.Picture SizePicture ModeAudio LanguageSubtitle LanguageSyncPositionᯧ Full ᯓStandardLatin100CloseFullOptionSubtitle Language Group Supported LanguageLatin1 French, Spanish, Catalan Basque, Portuguese, Italian, Albanian, Rhaeto-Romanic, Dutch, German, Danish, Swedish, Norwegian, Finnish, Faeroese, Icelandic, Irish, Scottish, EnglishLatin2 Czech, Hungarian, Polish, Romanian, Croatian, Slovak, Slovenian, ServianLatin4 Estonian, the Baltic languages Latvian(Lettish)and Lithuanian, Greenlandic and LappishLatin5 English, TurkishCyrillic Bulgarian, Byelorussian, Macedonian, Russian, Serbian and pre-1990 (no ghe with upturn)UkrainianGreek English, modern GreekHebrew English, modern HebrewChinese ChineseKorean English, KoreanArabic English, Arabic
USB39To See The DivX Registration Code1. Press the MENU button. Then, move to USB with the ġ, Ģ, ˘, ˚buttons and press the 󱡧OK button.2. Press the ġ, Ģ buttons to move to DivX Reg. Code and press the 󱡧OK button.3. You can see the DivX registration code of the projector.• With a DivX registration code from other projector, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased projector are playable.)• The video or audio of a file converted based on a standard other than the DivX codec standard may be corrupted or unable to be played.• Press the BACK button to exit the menu screen.* Confirm the DivX registration code number of the projector. Using the registration number, movies can be rented or purchased at www.divx.com/vod.Deactivation Function1. Press the MENU button. Then, move to USB with the ġ, Ģ, ˘, ˚buttons and press the 󱡧OK button.2. Press the ġ, Ģbuttons to move to Deactivation and press the 󱡧OK button.3. Move to a desired item with the ˘, ˚buttons and then press the 󱡧OK button.• DRM (Digital Rights Management) function: These are the technology and the service that prevents the illegal use of digital contents to protect the copyrights owners’ benefits and rights. File can be played after the license is cleared through the methods of online, etc.• Press the BACK button to exit the menu screen.* Delete the existing authentication information to receive a new DivX user authentication for projector. Once this function is executed, a DivX user authentication is required again to see DivX DRM files.USBPhoto ListMusic ListMovie ListFile ViewerDivX Reg. CodeDeactivationUSBPhoto ListMusic ListMovie ListFile ViewerDivX Reg. CodeDeactivationᰰMove ᰷OKᰰMove ᰷OK
USB40FILE ViewerScreen Components1. Moves to upper level file2. Preview: Display the title/folder name of the file in the selected folder3. Current page/Total pages4. Corresponding buttons on the remote controlPage 1/1File ViewerDrive 1Requiem 2 story.txtTitle DateUp Folderinformation.pptRequiem 2 story.txt2134Up FolderᰰNavigation ᰷PopUp Menu ᳉ Page Change  ᱷExitSupported File : XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF• Microsoft Office Version 97 / 2000 / 2002 / 2003 / 2007• Adobe PDF Version 1.0 / 1.1 / 1.2 / 1.3 / 1.4- File Viewer realigns the document, so it may look different from the PC.- For the documents that include images, the resolution may look lower during the realigning process.- If the document volume is big or it has many pages, the loading may take long time.- For some fonts that are not supported, they may be replaced with other fonts.View File1. Press the USB button. Then, move to FILE Viewer with the ˘, ˚ buttons and press the 󱡧OK button.2. Press the ġ, Ģ, ˘, ˚move to a desired file and press the 󱡧OK button.Go Page Zoom Hide• Use Page ġ, Ģ button to move the previous or next page.• Go Page: Move to a desired page. 1. Move to Go Page with ˘, ˚buttons and press ġbutton.2. Press the ġ, Ģ, ˘, ˚buttons select a desired page and press the 󱡧OK button.• Zoom: Zoom in or zoom out.1. Move to Zoom with ˘, ˚buttons and press ġbutton.2. Press the ˘, ˚buttons select a desired page and press the 󱡧OK button.• Hide: Close the menu.- To see the menu again on the full-sized screen, press MENU button to display.03/14 page100 % - +horizontal array vertical array 󱡧OK
Information41Supported Monitor Display* The following table lists the display formats supported by the projector.* If the projector does not support the input signal, “Invalid Format” message appears on the screen.* The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor)* PC synchronization signal types supported :Separate type synchronization.* To get the the best picture quality, adjust the PC graphics card to 1024x768.Format Vertical Freq.(Hz) Horizontal Freq.(kHz)* Cable type1- RGB to Component Cable2- HDMI Cable< DVD/DTV Input >InformationSignal Component-*1 HDMI-*2NTSC (60 Hz)480i O X480p O O720p O O1080i O O1080p O OPAL (50 Hz)576i O X576p O O720p O O1080i O O1080p O O24 / 30 Hz 1080pOOCleaning the lensIf there is any dust or stain on the surface of the lens, you must always clean the lens. Use an air spray or cleaning cloth for product exterior, provided with the product, to lightly clean the product. Please use a recommended air spray or lens cleaning product.To clean lens, small amount of cleaning agent on a swab or a soft cloth and rub on the lens. Please be aware that liquid may flow pass through the lens if the product is sprayed on lens directly.Cleaning the Projector CaseTo clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with polish cloth provid-ed. When you want to remove the dust or stain on the lens, use the cloth for product exterior, provided with the product.Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discol-ored.*The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first.Maintenance
Information42MODEL HX300G (HX300G-JE) / HX301G (HX301G-JE)Resolution 1024 (Horizontal) x 768 (Vertical) pixelHorizontal / Vertical Ratio 4:3 (horizontal:vertical)Panel size (mm) 13.97Screen size(Projection distance) 0.55 m ~ 2.75 mProjection Offset 110 %Remote control distance 6 mVideo compatibility NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N/PAL-60AC-DC Adapter LG, PA-1121-04, 19.5 V, 6.15 AAudio Output 1W + 1WHeight (mm) 57.5 (without foot), 61.0 (with foot)Width (mm) 160Length (mm) 135.5Weight (g) 786USB Device 5 V, 0.5 A (max)Operating ConditionTemperatureIn operation : 0°C ~ 40°CIn storage and transit : -20°C ~ 60°CHumidity In operation : 0 % ~ 80% relative humidityNot in operation : 0 % ~ 85% relative humidityFM Transmitter Spec(HX300G only)Frequency Band : 88.5 MHz ~ 95.5 MHzChannel Spacing : 200 KHzTransmition Power : Under 250 uVSpecifications
Information43Open Source Software NoticeThe following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements:GPL EXECUTABLES:Linux kernel 2.6, busybox, lzo, u-bootLGPL LIBRARIES:uClibcMPL LIBRARIES:nanoxLG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.comThis offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics.You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this product. Also you can obtain the translation of GPL, LGPL licenses fromhttp://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html,http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.This product includes Ź cmap: copyright © 1990-1998 Adobe Systems Incorporated.ŹGIF LZW Decoder: copyright © 1987, by Steven A. BennettŹ md5: copyright © 1991-2, RSA Data Security, IncŹ jpeg: Independent JPEG Group, copyright © 1991 – 1998, Thomas G. Lane. Ź libpng: copyright © 2004 Glenn Randers-PehrsonŹ OSSP str - String Handling: - copyright © 1999-2005 Ralf S. Engelschall <rse@engelschall.com> - copyright © 1999-2005 The OSSP Project http://www.ossp.org/Ź random number generator : copyright © 1990, 1993 The Regents of the University of California.Ź Standard C functions - copyright © 1998 Softweyr LLC. - copyright © 1988, 1993 The Regents of the University of California.Ź tinyxml: copyright © 2000-2006 Lee Thomason Ź zlib: copyright © 1995-2002 Jean-loup Gailly and Mark Adler.All rights reserved.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Information43Open Source Software NoticeThe following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements:GPL EXECUTABLES:Linux kernel 2.6, busybox, lzo, u-bootLGPL LIBRARIES:uClibcMPL LIBRARIES:nanoxLG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.comThis offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics.You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this product. Also you can obtain the translation of GPL, LGPL licenses fromhttp://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html,http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.This product includes Ź cmap: copyright © 1990-1998 Adobe Systems Incorporated.ŹGIF LZW Decoder: copyright © 1987, by Steven A. BennettŹ md5: copyright © 1991-2, RSA Data Security, IncŹ jpeg: Independent JPEG Group, copyright © 1991 – 1998, Thomas G. Lane. Ź libpng: copyright © 2004 Glenn Randers-PehrsonŹ OSSP str - String Handling: - copyright © 1999-2005 Ralf S. Engelschall <rse@engelschall.com> - copyright © 1999-2005 The OSSP Project http://www.ossp.org/Ź random number generator : copyright © 1990, 1993 The Regents of the University of California.Ź Standard C functions - copyright © 1998 Softweyr LLC. - copyright © 1988, 1993 The Regents of the University of California.Ź tinyxml: copyright © 2000-2006 Lee Thomason Ź zlib: copyright © 1995-2002 Jean-loup Gailly and Mark Adler.All rights reserved.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment maycause harmful interference unless the modification are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with Part 15 or the FCC's Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept ant interference received, including interference that may cause undesirable operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by on or more of thefollowing measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Hereby, LG. declares that this HX300G-JE is in compliance with the essential requirements and other relevant provision of directive1999/5/EC.
The model and serial number of the projector is located on the back and one side of the projector. Record it below should you ever need service.MODELSERIAL

Navigation menu