LG Electronics USA IPS235PX LCD Monitor User Manual IPS235PX

LG Electronics USA LCD Monitor IPS235PX

IPS235PX_User Manual

www.lg.comOWNER’S MANUALLCD MONITORIPS225PIPS235PPlease read this manual carefully before operating your set and retain it for future reference.LCD MONITOR MODELENGLISH
Important PrecautionsNOTETHE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY NOTEThis epuipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of  the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequencycause harmful interference to radio communications.However,there is noguarantee that interference will not occur in a particular installation.If this which can be determined by turning the equipment off and on,the user isencouraged to try to correct the interference by one or more of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and the receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.energy and,if not installed and used in accordance with the instructions,may equipment does cause harmful interference to radio or television reception,TO OPERATE THE EQUIPMENT. -Consult the dealer or an experienced radio/TV technician for help.A3
2ENGENGLISHTABLE OF CONTENTSCONTENTS3ASSEMBLING AND PREPARING3 Unpacking4 Parts and buttons6 Setting up the Monitor set 6 - Attaching the Stand Base6 - Detaching the Stand Base 7 - Mounting on a table8 - Mounting on a wall10 USING THE MONITOR SET10 Connecting to a PC10 - D-SUB connection10 - DVI-D connection10 - HDMI connection12 CUSTOMIZING SETTINGS12 Accessing The Main Menus13 Customizing Settings13 - Menu Settings14   -PICTURE15   -COLOR16   -DISPLAY16   -VOLUME17   -OTHERS18 MODE Setting19 DUAL PACKAGE Setting20 TROUBLESHOOTING22 SPECIFICATIONS22 IPS225P23 IPS235P24 Preset Modes (Resolution)24 Indicator
3ENGENGLISHASSEMBLING AND PREPARINGASSEMBLING AND PREPARINGUnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. Do not use any unapproved accessories to ensure the safety and product life span. Any damages or injuries by using unapproved accessories are not covered by the warranty.  The accessories supplied with your product may vary depending on the model. Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.CAUTIONNOTEStand BasePower CordCD(Owner's Manual) / CardD-SUB Cable(This signal cable may be attached to this product before shipping out.)DVI-D Cable(This cable is not included in all countries.)Display Quality Assurance ReportUser must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores (core in the connector) to maintain standard compliance for the product。
4ENGENGLISHASSEMBLING AND PREPARINGParts and buttonsPower Indicator Lighting On: Turned on Lighting Off: Turned offButton (See p.13)(Power Button)Connection panel (See p.10)
5ENGENGLISHASSEMBLING AND PREPARINGButton DescriptionMENU Accesses the main menus.(See p.13)OSD LOCKED/UNLOCKEDThis function allows you to lock the current control settings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.MODE Use this button to enter USER, MOVIE,TEXT,PHOTO,sRGB menus.(See p.18)DUAL Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.19)AUTO When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)The best display mode 1920 x 1080INPUT  You can choose the input signal.•  When two input signals are connected, you can select the input signal (D-SUB/DVI/      HDMI) you want.•  When only one signal is connected, it is automatically detected. The default setting is      D-SUB.EXIT Exit the OSD(On Screen Display). (Power Button) Turns the power on or off.Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue.
6ENGENGLISHASSEMBLING AND PREPARINGSetting up the Monitor set Attaching the Stand Base1  Place the Monitor set with the screen side down on a flat and cushioned surface.Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. yThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.CAUTIONCAUTIONDetaching the Stand Base 1  Place the Monitor set with the screen side down on a flat and cushioned surface.2  Turn the screw to the left, and then pull out the Stand Base from the Stand Body.2  Attach the Stand Base and then tighten the screw to the right with a Coin.Stand Base1Stand Base
7ENGENGLISHASSEMBLING AND PREPARINGMounting on a table1  Lift and tilt the Monitor set into its upright position on a table.Leave a 10 cm (minimum) space from the wall for proper ventilation.2  Connect the Power Cord to a wall outlet.3  Press  (Power) button on the front switch panel to turn the power on.10 cm10 cm10 cm10 cmUnplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.CAUTIONSwivel  Range : -  45˚(+/- 2°)     Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.NOTEFront RearHeight Range : maximum 5.12 inches (130.0 mm)* Please be sure to       remove the Locking pin to adjust the height.   45˚(+/- 2°)     5 - 51130.0 mm
8ENGENGLISHASSEMBLING AND PREPARINGUsing the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.Connect the Kensington security system cable between the Monitor set and a table.The Kensington security system is optional. You can obtain it from most electronics stores.NOTEWARNINGWhen adjusting the angle of the screen, do not put your finger(s)in between the head of the  m-onitor and the stand body. Youcan hurt your finger(s).When adjusting the height of thescreen, do not put your finger(s) in between the head of the mo-nitor and  the stand  base.  You  can hurt your finger(s).WARNINGYou do not need to replace the Locking pin  after  it is removed, to adjust its height. ERGONOMIC   It is recommended that in order to maintain an erg-onomic and comfortable viewing position, the forw-    ard tilt angle of the monitor should not exceed 5     degrees.
9ASSEMBLING AND PREPARINGUsing the Pivot function-The pivot function allows you to rotate the screen 90 degrees clockwise. 1.Lift the monitor to its highest height to utilize the Pivot function.2.Landscape & Portrait : You can rotate the panel 90o  clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then  the StandBase could crack.3.Be careful with the cables when rotating the screen. ENGENGLISHHead sectionStand section............
10 ASSEMBLING AND PREPARING yDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. yIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.  yUse only an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty.  y Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yUse the screws that are listed on the VESA standard screw specifications. yThe wall mount kit will include an installation manual and necessary parts. yThe wall mount bracket is optional. You can obtain additional accessories from your local dealer. yThe length of screws may differ depending on the wall mount. Be sure to use the proper length. yFor more information, refer to the instructions supplied with the wall mount.CAUTIONNOTEModel IPS225P/IPS235PVESA (A x B) 100  x 100Standard screw M4Number of screws 4Mounting on a wallFor proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the  optional Tilt Wall Mounting Bracket Installation andSetup Guide.When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.Please use VESA standard as below. y784.8 mm (30.9 inch) and under* Wall Mount Pad Thickness : 2.6 mm* Screw : Φ 4.0 mm x Pitch 0.7 mm x                 Length 10 mm y787.4 mm (31.0 inch) and above* Please use VESA standard wall mount pad and screws.10 cm10 cm10 cm10 cmENGENGLISH
11USING THE MONITOR SETUSING THE MONITOR SETConnecting to a PC yYour Monitor set supports Plug & Play*. *Plug & Play:  A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.D-SUB connectionTransmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. yMac adapterFor Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. yWhen using a D-Sub signal input cable connector for Macintosh yIf you use HDMI PC, it can cause compatibility problem.NOTENOTEDVI-D connectionTransmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.HDMI connectionTransmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations.ENGENGLISH
12ENGLISHUSING THE MONITOR SET yWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/DVI-D/HDMI) respectively in Monitor set. yIf you turn the Monitor set on while it is cold, the screen may flicker. This  is normal. ySome red, green, or blue spots may appear on the screen. This is normal. y"Self Image Setting" Function.This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) y‘AUTO’ Function.When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.(Only supported in Analog Mode)NOTE NOTE yConnect the signal input cable and tighten it by turning the screws clockwise. yDo not press the screen with your finger for  a long time as this may result in temporary distortion on the screen. yAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.CAUTION Self Image Setting FunctionPress the power button on the front panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is  executed automatically. (Only supported in Analog Mode)ENGENGLISH
13CUSTOMIZING SETTINGSCUSTOMIZING SETTINGSAccessing The Main Menus1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the desired menu item.3  Change the value of the menu item by pressing the buttons on the front of the Monitor set.To return to the upper menu or set other menu items, use the up arrow ( ) button.4  Select EXIT to leave the OSD menu.Monitor set ButtonsMENU (See p.14)Sets the screen options.DUAL (See p.20)Sets the screen.EXITExits the OSD menu.INPUTSets the external input.MODE (See p.19)Sets the mode.AUTO (See p.12)Optimizes the resolution.Different menu items are enabled depending on the type of input signal. yD-SUB / DVI Mode: MENU, MODE, DUAL, AUTO, INPUT, EXIT yHDMI Mode: MENU, MODE, INPUT, EXITNOTEENGENGLISH
14 CUSTOMIZING SETTINGSCustomizing SettingsMenu Settings1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the MENU button to display the options in the OSD menu.3  Set the options by pressing the buttons on the front of the Monitor set.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.The available program settings are described below.Menu Sub-menu Analog Digital HDMI DescriptionPICTURE BRIGHTNESSCONTRASTSHARPNESS ● ● ● To adjust the brightness, contrast and sharpness of the screen BLACK LEVEL ●To set offset levelCOLOR COLOR TEMP(PRESET/USER)● ● ● To customize the color of the screenGAMMACOLOR RESETDISPLAY HORIZONTALVERTICAL ●To adjust the position of the screenCLOCK PHASE ●To improve the clarity and stability of the screen OVERSCAN ●VOLUME ●To adjust the volumeOTHERS LANGUAGE POWER INDICATOR ● ● ●To customize the screen status for a user's operating environmentWHITE BALANCE ●ORIGINAL RATIO ● ● ●SUPER  ENERGYSAVING ● ● ●FACTORY RESET ● ● ● yAnalog: D-SUB(Analog signal) input. yDigital: DVI-D(Digital signal) input. yHDMI: HDMI(Digital signal) input. ENGENGLISH
15CUSTOMIZING SETTINGSPICTURE1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the MENU button to display the options in the OSD menu.3  Select PICTURE by pressing the buttons on the front of the Monitor set and set the options.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.   The available picture settings are described below.Menu DescriptionBRIGHTNESS To adjust the brightness of the screen. CONTRAST  To adjust the contrast of the screen.SHARPNESS To adjust the clearness of the screen.BLACK LEVEL You can set the offset level. If you select'HIGH', the screen will be bright and if you select ‘LOW’, the screen will be dark. (only for HDMI input)* Offset?As the criteria for video signal, it is the darkest screen the monitor can show. ENGENGLISH
16CUSTOMIZING SETTINGSCOLOR1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the MENU button to display the options in the OSD menu.3  Select COLOR by pressing the buttons on the front of the Monitor set and set the options.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.The available picture settings are described below.Menu DescriptionCOLOR TEMP PRESETSelect the screen color.  • WARM: Set the screen to warm color temperature (more red).    • MEDIUM: Set the screen to medium color temperature.    • COOL: Set the screen to cool color temperature (More blue).USER• SIX COLOR: Sets and stores the hue and saturation for six colors(RED/ GREEN/BLUE/CYAN/MAGENTA/YELLOW) to satisfy the color requirements of a user.    HUE    Adjusts the screen hue.SATURATION    Adjusts the color sharpness on the screen. Lower values make the color sharpness weaker and colors lighter while higher values make the color sharpness stronger and colors dark.• RED:• GREEN: • BLUE:Set your own red color levels. Set your own green color levels. Set your own blue color levels.GAMMA Set your own gamma value. : 1.8/2.0/2.2/2.4/2.6 On the monitor, high gamma values display whitish images and low gamma values display blackish images.COLOR RESET Resets the color settings to the factory default settings for the current input device.  ENGENGLISH
17CUSTOMIZING SETTINGSDISPLAY1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the MENU button to display the options in the OSD menu.3  Select DISPLAY by pressing the buttons on the front of the Monitor set and set the options.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.   The available picture settings are described below.VOLUME1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the MENU button to display the options in the OSD menu.3  Select VOLUME by pressing the buttons on the front of the Monitor set and set the options.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.   The available picture settings are described below.Menu DescriptionHORIZONTAL To move image left and right. VERTICAL To move image up and down.CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.OVERSCAN To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend overscan function to turn on when connect AV equipment.Menu DescriptionVOLUME To adjust the volume of headphone/Earphone.(Only for HDMI input)ENGENGLISH
18CUSTOMIZING SETTINGSOTHERS1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the MENU button to display the options in the OSD menu.3  Select OTHERS by pressing the buttons on the front of the Monitor set and set the options.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.   The available picture settings are described below.  yTOTAL POWER REDUCTION: How much power is saved while using the monitor. yTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. ySAVING DATA(W/h)545 mm (21.5 inch) 584 mm (23 inch)SUPER SAVING 4 W/h 5 W/hLED SAVING 15 W/h 12 W/h ySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor. yLG calculated these values by using “broadcast video signal”. yLED Saving refers to how much power can be saved using a  WLED Panel instead of CCFL panel. ySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.NOTERTCMenu DescriptionLANGUAGE To choose the language in which the control names are displayed.POWERINDICATORUse this function to set the power indicator on the front side of the monitor to ON or OFF.If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on.WHITEBALANCEIf the output of the video card is different the required specifications,the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.Activate this function when white and black colors are present in the screen.ORIGINAL RATIOWIDESwitch to full screen mode according to input image signal.ORIGINALChange the input image signal ratio to original.* This function works only if input resolution is lower than Monitor set ratio (16:9).SUPER ENERGY SAVING Sets the SUPER ENERGY SAVING function.ONEnables SUPER ENERGY SAVING you can save energy with this energy-  efficient functionOFF Disables SUPER ENERGY SAVING.RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.FACTORY RESET Restore all factory default settings except"LANGUAGE." Press the      , ►   buttons to reset immediately. ►RTC   If you set ON,you enable the Response Time Control function  If you set OFF,you disenable the Response Time Control function.ENGENGLISH
19CUSTOMIZING SETTINGSMODE Setting1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the MODE button to display the options in the OSD menu.3  Set the options by pressing the buttons on the front of the Monitor set.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.   The available picture settings are described below.Menu DescriptionUSER It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.MOVIE  It is a mode that the screen is adjusted to the best to view the videos.TEXT It is a mode that the screen is adjusted to the best for the text works.PHOTO It is a mode that the screen is adjusted to the best to view pictures.sRGB It is a mode that the screen is adjusted to the standard sRGB.ENGENGLISH
20 CUSTOMIZING SETTINGSThe available picture settings are described below. NOTE yWhen monitor goes to Power Saving Mode with PC power saving option, on pressing any button and selecting Dual option user can bring back monitor to normal mode.DUAL PACKAGE Setting1  Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.2  Press the DUAL button to display the options in the OSD menu.3  Set the options by pressing the buttons on the front of the Monitor set.4  Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button.* Before using below functions, please install DUAL PACKAGE programme.* Only for D-SUB/DVI-D input.Menu DescriptionDUAL MONITOR OFF If select OFF,DUALMONITOR offEXTENDED By selecting EXTENDED,user can use secondary monitor as extended mode of primary monitor.CLONE By selecting CLONE,user can use secondary monitor as done mode of primary monitor.DUAL WEB ON Help user to browse web efficiently by dividing in half. Help to arrange and move windowson screen. Help user to control dividedwindows ratio. OFF If select OFF,DUAL WEB is off.    ENGENGLISH
21TROUBLESHOOTINGTROUBLESHOOTINGCheck the following before calling for service.No image appearsIs the power cord of the display connected?  yCheck and see if the power cord is connected properly to the power outlet.Is the power indicator light on?  yPress the Power button.Is the power on and the power indicator blue or green?  yAdjust the brightness and the contrast.Is the power indicator flickering?  yIf the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. yTry to turn on the PC.Do you see an "OUT OF RANGE" message on the screen?  yThis message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.Do you see a "CHECK SIGNAL CABLE" message on the screen?   yThis message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.Do you see a "OSD LOCKED" message on the screen?Do you see “OSD LOCKED” when you push MENU button?  yYou can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.Display image is incorrectDisplay Position is incorrect.  yPress the AUTO button to automatically adjust your display image to the ideal setting.On the screen background, verticalbars or stripes are visible.  yPress the AUTO button to automatically adjust your display image to the ideal setting. Any horizontal noise appearing in any image or characters are not clearly portrayed. yPress the AUTO button to automatically adjust your display image to the ideal setting.  yCheck Control Panel ► Display ► Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits  (true color).ENGENGLISH
22TROUBLESHOOTINGDisplay image is incorrectThe screen color is mono or abnormal.  yCheck if the signal cable is properly connected and use a screwdriver to fasten if necessary. yMake sure the video card is properly inserted in the slot. ySet the color setting higher than 24 bits (true color) at Control Panel ► Settings.The screen blinks.  yCheck if the screen is set to interlace mode and if yes, change it to the recommend resolution.Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?Have you installed the display driver?  yBe sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. yMake sure to check if the video card supports Plug&Play function.  yCheck Control Panel ► Display ► Settings and see if the frequency or the resolution were changed.  If yes, readjust the video card to the recommend resolution. yIf the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. yThe setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.CAUTIONENGENGLISH
23SPECIFICATIONSSPECIFICATIONS   Product specifications shown above may be changed without prior notice due to upgrade of product functions.IPS225PDisplay Screen Type 54.5 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 54.5 cmPixel Pitch 0.247 mm x 0.247 mm (Pixel Pitch)Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)56Hz to 61Hz (HDMI)Input Form Separate Sync. DigitalVideo Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)HDMI ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalResolution Max D-SUB(Analog) : 1920 x 1080 @ 60 HzDVI / HDMI (Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 HzPlug & Play DDC 2B(Analog,Digital,HDMI)Power Consumption On Mode : 31 W(Typ.)Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W Power Input AC 100-240 V~ 50 / 60 Hz 1.0ADimensions(Width x Height x Depth) With Stand 51.3 cm x 51.6 cm x 22.2 cm (Max)Without Stand 51.3 cm x 31.2 cm x 5.9 cmWeight 5.45 kgTilt Range -5° to 15°Environmentalconditions Operating TemperatureOperating Humidity 10°C to 35 °C10 % to 80 % Storage TemperatureStorage Humidity -20°C to 60 °C   5 % to 90 % non-CondensingStand Base Attached (    ), Detached (O)Power cord Wall-outlet type51.3 cm x 38.6 cm x 22.2 cm  (Min )ENGENGLISH
24SPECIFICATIONS SPECIFICATIONS Product specifications shown above may be changed without prior notice due to upgrade of product functions.IPS235PDisplay Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 58.4 cmPixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch)Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)56Hz to 61Hz (HDMI)Input Form Separate Sync. DigitalVideo Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)HDMI ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalResolution Max D-SUB(Analog) : 1920 x 1080 @ 60 HzDVI / HDMI (Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 HzPlug & Play DDC 2B(Analog,Digital,HDMI)Power Consumption On Mode : 35 W(Typ.)Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W Power Input AC 100-240 V~ 50 / 60 Hz 1.0 ADimensions(Width x Height x Depth)With Stand 54.7 cm x 51.6 cm x 22.2 cm (Max) Without Stand 54.7 cm x 33.1 cm x 5.9 cmWeight                                5.75 kgTilt Range -5° to 15°Environmentalconditions Operating TemperatureOperating Humidity 10°C to 35 °C10 % to 80 % Storage TemperatureStorage Humidity -20°C to 60 °C   5 % to 90 % non-CondensingStand Base Attached (    ), Detached (O)Power cord Wall-outlet type 54.7 cm x 38.6 cm x 22.2 cm (Min ) ENGENGLISH
25SPECIFICATIONSPreset Modes (Resolution)Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V)720 x 400 31.468 70 -/+640 x 480 31.469 60 -/-640 x 480 37.500 75 -/-800 x 600 37.879 60 +/+800 x 600 46.875 75 +/+1024 x 768 48.363 60 -/-1024 x 768 60.123 75 -/-1152 x 864 67.500 75 +/+1280 x 1024 63.981 60 +/+1280 x 1024 79.976 75 +/+1680 x 1050 65.290 60 -/+1920 x 1080 67.500 60 +/+ Recommend ModeHDMI TIMINGDisplay Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz)480P 31.50 60576P 31.25 50720P 37.50 50720P 45.00 601080i 28.12 501080i 33.75 601080P 56.25 501080P 67.50 60    Recommend ModeIndicatorMode LED ColorOn Mode BlueSleep Mode Blinking BlueOff Mode OffENGENGLISH
Make sure to read the Safety Precautions before  using the product.Keep the Owner’s Manual (CD) in an accessible place for future reference.The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.ENERGY STAR is a set of power-savingguidelines issued by the U.S.EnvironmentalProtection Agency(EPA).MODELSERIAL

Navigation menu