LG Electronics USA KBB710 Bluetooth Keyboard User Manual

LG Electronics MobileComm USA, Inc. Bluetooth Keyboard Users Manual

Users Manual

KBB-710www.lg.com12Product Overview LED indicatorRolling magnetsKey padBattery coverStandUsing the ProductInstall the battery- When using the keyboard for the rst time, open the battery cover at the top center of the keyboard by pressing your ngernail against the slit on the battery cover.- Remove the protective lm between the AAA battery included in the keyboard and the positive (+) and negative (-) poles. Insert the battery in the correct direction, and then close the cover.Note: Only use batteries approved by the manufacturer.Position a device- Open out the stand by pressing your ngernail against the slits on the top left and right of the keyboard, and then place your device on the stand.34 Power offWhen you power off the product, be sure to close it in the direction of the arrows.* Failure to follow the instructions in this manual may result in fault or malfunction and the product may not power off properly.Pair the keyboard with a device running Windows® 7 or 8Some keys may not be supported by Windows OS.1. Power on the keyboard by opening it completely.2*. Press and hold down the “1” key for at least 2 seconds. - When in pairing mode, the blue LED indicator blinks at 1-second intervals for 2 minutes.3. Select Control Panel > Add devices and printers > Add a device.4. Select “LG Rolly KBB710”. Follow the onscreen instructions to complete the pairing.5. When pairing is complete, the LED indicator changes to blue for 3 seconds and then dims.Multi Pairing1. To add a second device, press and hold down the “2” key for at least 0.2 seconds.(To add a third device, press and hold down the “3” key for at least 0.2 seconds.)or The blue LED blinks, and the connection waiting mode is enabled. 2. Search “LG Rolly KBB710” on the second device and connect it (Refer to “Pairing the Keyboard with a Device” on page 3).3. When connection is made, the purple LED is turned on for 3 seconds, and then turned off again.- The purple LED blinks for 3 seconds when connecting to the third device.4. If you intend to use the keyboard with a different device, hold the corresponding device selection button for more than 0.2 seconds.5. If you intend to connect the keyboard to a new device, hold the corresponding device selection button for more than 2 seconds to enable the connection waiting mode.- Refer to “Pairing the Keyboard with a Device” for the rest of the procedure. yOnce the keyboard has been paired with an Android or Windows device, the pairing process will not need to be repeated to reconnect to previously paired devices. y If you pair a new device when the keyboard has already been paired with two devices, the last paired device is unpaired.LED IndicatorThe LED indicator will light up according to the tables below.To check the battery level, press the “Fn + Space” keys. Battery levelStatus ActionBattery level is at 15% or aboveBlinks blue ve timesBattery level is at 5 to 15%Blinks red ve timesIf the battery needs charging, the red LED keeps blinking even if there is no input. When the battery runs low or is fully discharged, replace it with a new AAA battery.5678WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Call (800) 243-0000 for more information. Wash hands after handling. Part 15.19 statementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.21 statementChanges or modications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment.Part 15.105 statementThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/television technician for help.TroubleshootingIf the keyboard does not operate following installation or is not recognized. yMake sure the batteries are not too weak. yTo determine whether the keyboard or the paired device is causing the problem, test the keyboard by pairing it with another device if possible; or test another keyboard with your currently paired device. If you are still unable to solve the problem, please contact your point of sale or your dealer.If you need to exchange the keyboard, please note that you must return it to your dealer in its original packaging with proof of purchase (receipt); keep your receipt in a safe place after purchase.StandardBluetooth 3.0Frequency range2402 ~ 2480 MHzOperating temperature0°C to 40°C- Hot keysText cut iOS: Cmd + X Android/Windows OS: Ctrl + X Text copy iOS: Cmd + CAndroid/Windows OS: Ctrl + CText paste iOS: Cmd + VAndroid/Windows OS: Ctrl + VLanguage selectiOS 8 or earlier: Cmd + SpaceiOS 9 or later: Ctrl + Space Android: Shift + SpacePairing the Keyboard with a DeviceThis product can be connected and used with up to three Bluetooth® devices. Set up your Bluetooth device by following the instructions below:Pair the keyboard with an Android™ OS or iOS device 1. Power on the keyboard by opening it completely.2*. Press and hold down the “1” key for at least 2 seconds. - When in pairing mode, the blue LED indicator blinks at 1-second intervals for 2 minutes.3. Search for the keyboard on the primary device you want to pair with, or select “LG Rolly KBB710” among the searched devices. - Some devices may require you to enter a PIN. Press and hold the Fn key while entering the PIN.4. When pairing is complete, the LED indicator changes to blue for 3 seconds and then dims.User GuideRev 1.0 USAll rights reserved. LG Electronics Inc., 2015Note: Please read all information carefully prior to using the KBB-710 in order to prevent product damage and to enjoy the best performance.WARNINGBatteryBatteries can overheat, explode, and catch re. Follow the instructions below to ensure safe and efcient use of the battery. yOnly use batteries approved by the manufacturer. yKeep the battery out of reach of pets and children. yWhen visibly swollen or corroded, the battery may be hazardous. Please contact the manufacturer or seller. yKeep the battery away from heat sources. (Never place in a microwave oven.) yDo not keep the product in a conned space for a long time with the power on. yEnsure the battery connectors do not come into contact with metal objects such as necklaces, coins, keys, and watches. yNever disassemble, modify, compress, or pierce the battery. If the battery has been severely impacted, discard and replace it immediately. yDo not drop the battery from a height or subject it to impact or shock. yStore the battery at room temperature (0°C to 50°C) and never expose it to temperatures of 60°C or above. yDo not touch the battery with wet hands or allow it to come into contact with moisture. yThere is a risk of explosion if the battery is not replaced correctly. Dispose of used battery according to the manufacturer’s instructions. yFor safety purposes, be sure to read the user guide before using the product. yAlways store the battery in a protective battery case to prevent external shock.CAUTIONKeyboard yOnly use batteries approved by the manufacturer. yThere may be compatibility issues when connected to some products. LG Electronics does not guarantee compatibility with all peripherals. yFunctions may vary depending on the device and OS. yThe stand may not hold a particular device depending on the type and orientation of the device. The angle may vary depending on the device. yDo not use the product in a damp place such as a laundry room or bathroom. This may result in malfunction or electric shock. Always use the product within the recommended temperature and humidity range of 10 to 35°C and 20 to 80% RH. yAlways use the product in a clean, dust-free environment. Otherwise this may cause a malfunction. ySet up the product on a stable base with no risk of falling. Otherwise this may result in damage to the product or personal injury. yDo not place heavy objects on the product. Failure to follow this precaution may result in malfunction. Such objects may fall and cause personal injury or damage to the product. ySpilling water, coffee, juice, or any other liquid on the keyboard may result in damage to the product or malfunction. yDo not place glasses or containers containing chemicals or water on or near the product. Getting water inside the product may cause a re. yDo not place a lit candle, cigarette, etc. on the product. This may result in a re. yThe underside of the product may become hot while in use. Avoid touching it or using the product on your lap. yAfter having the product serviced, ask a technician to perform a safety check on it. Using the product without a post-servicing safety check may result in re. yKeep the product away from heating appliances. Being too close to a heat source may cause the product to deform or to be set on re. yDo not leave the product unattended in a vehicle. This may result in explosion of the battery or re due to high temperature. yWhen not using the product for a long period of time; turn the power off to prevent unnecessary use of the battery power. yAlways use replacement parts approved by LG Electronics Inc™. Otherwise this may result in re or damage to the product. yDo not disassemble or modify the product. Doing so can void the warranty, even within the warranty period. yBe careful when touching a part or device. Incorrect handling may result in damage to the product. yWhen removing a part or device from the product, be careful not to drop it. The dropped part or device may cause personal injury or damage to the product. yThe magnets and small parts of the product are a swallowing hazard for children. yIf you have a medical device implanted, consult your doctor before using the product. yThe fabric used between the key rows may not withstand excessive pulling and twisting and should be handled with care. yThe magnets used in the product may damage magnetic cards or affect the operation of pacemakers, etc. yWhen on board an aircraft, always follow the crew’s instructions. Incorrect use of the product on the airplane may result in aviation accidents. yKeep the product away from direct sunlight. Direct sunlight may cause deformation of the product or re due to the increase in temperature. yDo not store the product in a conned space such as a bag for a long period of time, or repeatedly, with the power on. This may result in a re due to the battery overheating.RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.

Navigation menu