LG Electronics USA KT520 PCS GSM/ EDGE Phone with Bluetooth User Manual KT520 ENG 080116 indd

LG Electronics USA PCS GSM/ EDGE Phone with Bluetooth KT520 ENG 080116 indd

Users Manual

Disposal of your old appliance1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/CE.2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. KT520 User Guide - EnglishThis document is the user guide for the LG KT520 3G Video Mobile Phone. All rights for this document are reserved by LG Electronics. Copying, modifying and distributing this document without the consent of LG Electronics are prohibited.
Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. " Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected- Consult the dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product. (2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user. (3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada. (4) The external housing and cosmetic parts shall not be covered under these limited warranty terms. (5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase. (6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty. 2. WHAT THIS WARRANTY DOES NOT COVER: (1) Defects or damages resulting from use of the product in other than its normal and customary manner. (2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid. (3) Breakage or damage to antennas unless caused directly by defects in material or workmanship. (4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period. (5) Products which have had the serial number removed or made illegible. (6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use. (7) Damage resulting from use of non-LG approved accessories. (8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (9) Products operated outside published maximum ratings. 3 (10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 4. HOW TO GET WARRANTY SERVICE: To obtain warranty service, please call the following web address: www.lgeservice.com
8For Your SafetyImportant InformationThis user guide contains important information on the use andoperation of this phone. Please read all the informationcarefully for optimal performance and to prevent any damageto or misuse of the phone. Any changes or modifications notexpressly approved in this user guide could void your warrantyfor this equipment.Before You StartSafety InstructionsWARNING! To reduce the possibility of electric shock, do notexpose your phone to high humidity areas, such as thebathroom, swimming pool, etc.Always store your phone away from heat. Never store yourphone in settings that may expose it to temperatures less than32°F or greater than 104°F, such as outside during extremeweather conditions or in your car on a hot day. Exposure toexcessive cold or heat will result in malfunction, damageand/or catastrophic failure.Be careful when using your phone near other electronicdevices. RF emissions from your mobile phone may affectnearby in adequately shielded electronic equipment. Youshould consult with manufacturers of any personal medicaldevices such as pacemakers and hearing aides to determine ifthey are susceptible to interference from your mobile phone.Turn off your phone in a medical facility or at a gas station.Never place your phone in a microwave oven as this willcause the battery to explode.IMPORTANT! Please read the TIA SAFETY INFORMATION onpage 78 before using your phone.Safety InformationRead these simple guidelines. Breaking the rules may bedangerous or illegal. Further detailed information is given in thisuser guide.]Never use an unapproved battery since this could damagethe phone and/or battery and could cause the battery toexplode.]Never place your phone in a microwave oven as it willcause the battery to explode.]Do not dispose of your battery by fire or with hazardous orflammable materials.]Make sure that no sharp-edged items come into contactwith the battery. There is a risk of this causing a fire.]Store the battery in a place out of reach of children.]Be careful that children do not swallow any parts such asrubber plugs (earphone, connection parts of the phone,etc.). This could cause asphyxiation or suffocation.
9For Your Safety]Unplug the power cord and charger during lightning stormsto avoid electric shock or fire.]When riding in a car, do not leave your phone or set up thehands-free kit near to the air bag. If wireless equipment isimproperly installed and the air bag is activated, you may beseriously injured.]Do not use a hand-held phone while driving.]Do not use the phone in areas where its use is prohibited.(For example: aircraft).]Do not expose the battery charger or adapter to directsunlight or use it in places with high humidity, such as abathroom.]Never store your phone in temperatures less than- 4°F orgreater than 122°F.]Do not use harsh chemicals (such as alcohol, benzene,thinners, etc.) or detergents to clean your phone. There is arisk of this causing a fire.]Do not drop, strike, or shake your phone severely. Suchactions may harm the internal circuit boards of the phone.]Do not use your phone in high explosive areas as the phonemay generate sparks.]Do not damage the power cord by bending, twisting, pulling,or heating. Do not use the plug if it is loose as it may causea fire or electric shock.]Do not place any heavy items on the power cord. Do notallow the power cord to be crimped as it may cause fire orelectric shock.]Do not handle the phone with wet hands while it is beingcharged. It may cause an electric shock or seriouslydamage your phone.]Do not disassemble the phone.]Do not place or answer calls while charging the phone as itmay short-circuit the phone and/or cause electric shock orfire.]Only use the batteries, antennas, and chargers provided byLG. The warranty will not be applied to products provided byother suppliers.]Only authorized personnel should service the phone and itsaccessories. Faulty installation or service may result inaccidents and consequently invalidate the warranty.]Do not hold or let the antenna come in contact with yourbody during a call.]An emergency call can be made only within a service area.For an emergency call, make sure that you are within aservice area and that the phone is turned on.
10For Your SafetyFCC RF Exposure InformationWARNING! Read this information before operating the phone.In August 1996, the Federal Communications (FCC) of he UnitedStates, with its action in Report and Order FCC 96-326, adoptedan updated safety standard for human exposure to radiofrequency (RF) electromagnetic energy emitted by FCCregulated transmitters. Those guidelines are consistent withthe safety standard previously set by both U.S. andinternational standards bodies.The design of this phone complies with the FCC guidelines andthese international standards.CAUTIONUse only the supplied and approved antenna. Use ofunauthorized antennas or modifications could impair callquality, damage the phone, void your warranty and/or result inviolation of FCC regulations. Do not use the phone with adamaged antenna. If a damaged antenna comes into contactwith skin, a minor burn may result. Contact your local dealerfor a replacement antenna.Body-worn OperationThis device was tested for typical body-worn operations withthe back of the phone kept 0.79 inches (2cm) between theuser’s body and the back of the phone. To comply with FCC RFexposure requirements, a minimum separation distance of 0.79inches(2cm) must be maintained between the user's bodyand the back of the phone. Third-party belt-clips, holsters, andsimilar accessories containing metallic components should notbe used. Body-worn accessories that cannot maintain 0.79inches(2cm) separation distance between the user's bodyand the back of the phone, and have not been tested for typicalbody-worn operations may not comply with FCC RF exposurelimits and should be avoided.
11For Your SafetyVehicle Mounted External Antenna(optional, if available)A minimum separation distance of 8 inches (20cm) must bemaintained between the user/bystander and the vehiclemounted external antenna to satisfy FCC RF exposurerequirements. For more information about RF exposure, visitthe FCC website at www.fcc.govFCC Part 15 Class B ComplianceThis device and its accessories comply with part 15 of FCCrules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmfulinterference, and (2) this device and its accessories mustaccept any interference received, including interference thatmay cause undesired operation.Cautions for Battery]Do not disassemble.]Do not short-circuit.]Do not expose to high temperature: 60°C (140°F).]]Do not incinerate.Battery Disposal]Please dispose of your battery properly or bring to yourlocal wireless carrier for recycling.]Do not dispose in fire or with hazardous or flammablematerials.Adapter (Charger) Cautions]Using the wrong battery charger could damage your phoneand void your warranty.]The adapter or battery charger is intended for indoor useonly.Do not expose the adapter or battery charger to direct sunlightor use it in places with high humidity, such as the bathroom.
KT520 FeaturesKT520 Features14Parts of the phoneOpen viewEarpieceNavigation keys ] In standby mode: U List of Profiles D Contacts list L Messaging R Calendar] In menu: Navigates menus.LCD screen] Top: Icons showing signal strength, battery level and various other functions] Bottom: Soft key indicationsVGA cameraAlpha numeric keys ] In standby mode: Input numbers to dial. Hold down: 0 for international calls. 1to dial voice mail centre. 2 to 9 for speed dials.] In editing mode: Enter numbers & characters.
KT520 Features15Left soft key/ Right soft keyPerforms the function indicated at the bottom of the display.Confirm keySelects menu options and confirms actions.Music keysClear key] Clears a character with each press. Hold the key down to clear all input. Send key ] Dials a phone number and answers a call.] In standby mode: Shows a history of calls made, received, and missed.
16KT520 FeaturesKT520 FeaturesLeft side view Right side view Headset/Charger/Cable connector YNote] Please ensure phone is powered on and in idle mode before connecting the USB cable.End key E] Switch on/off (hold down)] End or reject a call.Multitasking key N] (Short press) Opens the task manager.] (Long press) Activates auto key lock directly when the slide is closed.Side keys A] In standby mode: Ring tone volume adjustment] During a call: Earpiece volume adjustment] During playing Radio DJ, Music or FM radio: Audio volume adjus tment ] During playing background music play:- Up key(Short press): Volume Up- Up key(Long press): Next File Play- Down key(Short press): Volume Down- Down key(Long press): Previous File Play Music hot key M] Accesses the Music menu. - (Long press): Pauses/Resumes background music - (Short press): Switches standby mode and media player on playing.Micro SD memory card slot
17KT520 FeaturesRear viewBattery release latchPress this button to remove the battery.BatteryMirrorExternal camera lensUSIM card socket
How to Use Touch Keys18How to Use Touch KeysCautions for Touch Keys1. Make sure your hands are clean and dry.- Remove all moisture from the surface of your hands or the touch keys in a humid environment.Touch key shortcut image Note: You can enable this feature in the display settings menu [Menu #.2.1.1].Touch keypad2. You do not need to press hard on the touch keys to make them work normally.Do not subject the product to severe impact, as this may damage the touch key sensors.3. Use the tip of your finger to press exactly on the touch key you want, being careful not to touch the keys for other functions.4. When both the home screen and touch key lights are off, pressing a touch key will not turn on the home screen light. Press E and the home screen light will turn back on(touch keys do not work when the touch key lights are off).5. If the slide is closed and the Touch Protection function is on, during calls the Touch key Lock function is automatically enabled. (For details, see “Touch Key Status When Using Mobile Phone”.)] This product’s keys on the slide are touch keys.] Be sure to read “Cautions for Touch Keys” before using touch keys.
How to Use Touch Keys196. Touch keys may not work normally if a mobile phone case or plastic cover is covering them. Also, touch keys may not work normally if you are wearing gloves.7. Keep metal and other conductive materials away from the surface of the touch keys, as contact with them may result in an error.Touch Key Status When Using Mobile PhoneWhen the slide is closed, to prevent indiscreet action of the touch keys whilst using the phone or during calls, the Touch Protection function is automatically enabled. (In this case, the touch keys will not work even if they are pressed)1. When slide is closed- When the slide is closed, the Touch Protection function is automatically enabled. (Opening the slide will automatically disable it.)- To disable Touch protection when the slide is closed, press OK key on displaying Unlock key. And then, press OK key again. 2. During calls- During calls, regardless of slide status, the Touch Protection function is automatically enabled. - To disable the Touch Protection, press OK key twice. - After disabling the Touch key Lock, if there is no key action for a certain duration (User defined), the Touch Protection function is enabled again.Note] For user convenience, the touch key image with the functions of each touch key is shown on the home screen when purchasing products.
Getting StartedGetting Started20Installing the USIM card and battery1. Installing the USIM card.Your USIM card contains your phone number, service details and contacts and must be inserted into your handset. If your USIM card is removed then your handset becomes unusable (except for emergency calls) until a valid one is inserted. Always disconnect the charger and other accessories from your handset before inserting and removing your USIM card. Slide the USIM card into the USIM card holder. Make sure that the USIM card is properly inserted and the gold contact area on the card is facing downwards. To remove the USIM card, press down lightly and pull it in the reverse direction.To insert the USIM card To remove the USIM cardNote] The metal contact of the USIM card can easily be damaged by scratches. Pay special attention to the USIM card while handling. Follow the instructions supplied with the USIM card.2. Installing the battery.Slide the battery upwards until it snaps back into place.
To remove the battery.Turn the power off. (If the power is left on, there is a chance you could lose the stored telephone numbers and messages.)Press and hold down the battery release button and slide the battery down. Charging the BatteryBefore connecting the travel adapter to the phone you must first install the battery.1. With the arrow facing you as shown in the diagram push the plug on the battery adapter into the socket on the left side of the phone until it clicks into place.2. Connect the other end of the travel adapter to the mains socket. Note] Only use the charger included in the box.3. The moving bars on the battery icon will stop after charging is complete.4. Ensure the battery is fully charged before using the phone for the first time.Getting Started21
Getting StartedGetting Started22CAUTION!• Do not force the connector as this may damage the phone and/or the travel adapter.• If you use the battery pack charger when abroad, use an attachment plug adaptor for the proper configuration.• Do not remove your battery or the USIM card while charging.WARNING! • Unplug the power cord and charger during lightning storms to avoid electric shock or fire.• Make sure that no sharp-edged items such as animal teeth or nails, come into contact with the battery. This may cause a fire.Disconnecting the chargerDisconnect the travel adapter from the phone as shown in the diagram below.How to use a microSD memory card<MicroSD memory card><How to insert a microSD memory card>1. Turn the phone off. Inserting or removing the microSD when the phone is on may damage the files stored in the memory card.2. Lift the plastic cover which protects the microSD slot.
3. Insert the memory card into the slot. The gold contacts must be kept on the back of the microSD. Don’t push the microSD too much. If it doesn't go into the slot easily, you may be trying to insert it in the wrong way or there could be a foreign object in the slot.4. Once inserted, push the memory card until you hear a Click, meaning that the microSD has been correctly engaged.5. Close the plastic slot protection.6. To remove the memory card, turn the phone off, open the slot protection and push the microSD to unlock it. Carefully extract the memory card.Attention:] Avoid using the Flash Memory Card when the battery is low.] When writing to the card, wait for the operation to complete before removing the card.] The card is designed to fit easily into the system one way only.] Do not bend the card or force it into the slot.] Do not insert any memory cards other than those made by microSD.] If the microSD has been formatted using FAT32, format the microSD using FAT16 again.For more information on the microSD, please refer to the memory card instruction manual. Getting Started23
Getting StartedGetting Started24Memory card formattingBefore you start to use the memory card you have to format it. After you insert the memory card, select Menu > Settings > Phone settings > Memory manager > External memory, then press - the left soft key. This operation should only be done when you insert the memory card for the first time. During formatting various folders will be created for different data types.Turning the handset on/offTurning your handset onEnsure that your USIM card is in your handset and the battery is charged. Press and hold E until the power comes on. Enter the USIM PIN code that was supplied with your USIM card if the PIN code request is set to On. (Note: Please refer to page 79) After a few seconds you will be registered on the network.Turning your handset off Press and hold E until the power goes off. There may be a few seconds delay while the handset powers down.Do not turn the handset on again during this time.Access codesYou can use the access codes described in this section to avoid unauthorised use of your phone. The access codes (except the PUK and PUK2 codes) can be changed by using the Change codes feature [Menu #.2.6.3].PIN code (4 to 8 digits)The PIN (Personal Identification Number) code protects your USIM card against unauthorised use. The PIN code is usually supplied with the USIM card. When the PIN code request is set to On, your phone will request the PIN code every time it is switched on. When the PIN code request is set to Off, your phone connects to the network directly without the PIN code.
PIN2 code (4 to 8 digits)The PIN2 code, supplied with some USIM cards, is required to access functions such as Fixed dial number. These functions are only available if supported by your USIM card.PUK code (8 digits)The PUK (PIN Unblocking Key) code is required to unblock a blocked PIN code. The PUK code may be supplied with the USIM card. If not, contact your network operator’s customer service department for the code. If you lose the code, contact your network operator’s customer service department.PUK2 code (8 digits)The PUK2 code, supplied with some USIM cards, is required to unblock a blocked PIN2 code. If you lose the code, contact your network operator’s customer service department.Security code (4 digits)The security code prevents unauthorised use of your phone. The default security code is set to ‘0000’ and the security code is required to delete all phone entries and to restore the handset to the factory settings.Display informationNo USIM idle screenThis is the initial screen of the phone that appears when there is no USIM card installed in the phone, or the installed USIM card is invalid. In this screen, users can only make emergency calls, and turn the phone off. To turn the phone off, press and hold down E for a few seconds.Screen structureIf there is no USIM card installed, an animation telling you to insert a USIM card appears. If the USIM card inserted into the phone is invalid, an animation telling you that the USIM card is locked appears.Getting Started25
Getting StartedGetting Started26Emergency call functionThe right soft key is represented by “Emergency” on the screen. Press the right soft key or dial your emergency number using the number keys, and then press O to make an emergency call.Idle screenThe idle screen appears when you have installed a proper USIM card and turned the phone on.Screen structureIdle screen consists of the operator's name, indicators, date and time on a background image. You can change the wallpaper in the Display settings menu.Numbering screenThe numbering screen appears when a number key is pressed in the idle screen.Screen structureThe numbering screen consists of status indicators, dialled number and soft menu. Status indicators are the same as those of the idle screen. You can change the size and colour of the dialling font in the Display settings menu. You can make a call while dialling a phone number by pressing S.Soft keyYou can use the soft keys for several functions while dialling a number. Using the left soft key, you can make a video call, send a message to the number, save the number to Contacts, search contacts.Handset lock screenWhen the Handset lock function is selected, you can only make an emergency call, release the lock, and turn off the phone in this screen. As always, you can turn the phone off by pressing and holding E for a few seconds.
Screen structureThe screen structure of the Handset lock screen is the same as that of the idle screen.Emergency call functionYou can make an emergency call using the right soft key. As with the No USIM idle screen, only emergency numbers can be dialled.Unlock functionIf you press key except right soft key and number key, a popup screen appears asking you to input the Security code to unlock the phone. The Security code is configured in the Change codes (#. Settings > 2. Phone settings > 6. Security > 3. Change codes). If you key in an incorrect Security Code, the phone will remain in Handset lock status. If you key in the correct Security code, the phone will be unlocked, and the idle screen will be displayed. If you have turned the phone off in the Handset lock status, you will find the phone remains in Handset lock status when you turn it on. Barring passwordThis service obstructs calling service in some conditions. This condition can be edited using the Call barring feature (#. Settings > 4. Call settings > 2. Call barring). The barring password is required when you use the call barring function. The password is obtained from your network operator's customer service when you subscribe to this service. While this service is activated, the caller will hear the information message that the call is not connected because of the call barring.Getting Started27
General FunctionsGeneral Functions28Making and answering callsMaking a voice call1. Enter the number including the full area code.] To delete a digit press C.To delete all digits press and hold C.2. Press S to make the call.3. Press E to finish the call, or close the handset.Note] To activate the speakerphone during a call, activate the touch keys and press O.Making a call from the call logs1. In standby mode, press S and the latest incoming, outgoing and missed phone numbers will be displayed.2. Select the desired number by using D / U.3. Press S to call the number.Making a video callYou can make a video call in a 3G covered service area. If the called user has a 3G video phone in a 3G covered service area, the call will be established. You can also answer a video call for video incoming call. To make/answer a video call, do the following.1. Input the phone number using the keypad, or select the phone number from the calls made/received lists.] To correct mistakes, press C briefly to delete the last number, or press and hold C to delete all numbers.2. If you do not want to use the speakerphone, ensure you have the headset plugged in.3. To start the video function, press the left soft key [Options] and select Video call.] You will be notified that you will need to close other applications to make the video call.
General Functions29Note] The video call may take some time to connect. Please be patient. The connection time will also depend on how quickly the other party answers the call. While the video call is connecting, you will see your own image; after the other party has answered, their image will be displayed on the screen.4. Adjust the camera position if necessary.5. Press E to finish the call, or close the handset.Making a voice/video call from ContactsIt is easy to call anyone whose number you have stored in your Contacts.1. Press D to access the contacts list.2. Scroll to the contact to make a call.3. Press S to make a voice call. Press the left soft key and select Make video call to make a video call. 4. Press E to finish the call.Making international calls1. Press and hold 0 for the international prefix. The ‘+’ character prefixes the international access code.2. Enter the country code, area code, and the phone number.3. Press S.Adjusting the volumeDuring a call, if you want to adjust the earpiece volume, use A on the left side of the phone. In idle mode, you can adjust the key volume using A.Answering a callWhen you receive a call, the phone rings and the flashing phone icon appears on the screen. If the caller can be identified, the caller’s phone number (or name if stored in your Contacts) is displayed.
General FunctionsGeneral Functions301. Open the slider to answer an incoming call.Note] To reject an incoming call, press E or the right soft key twice.] If you set Answer mode as Press send key (Menu #.5.0.4), you can answer the call by pressing S after opening the slider.] If the answer mode is set to Press any key, any key will answer a call except for E.2. End the call by closing the handset or pressing E.Note] You can answer a call while using the Contacts or other menu features.] When the compatible headset is connected, you can also answer a call using the headset key, as well as using the phone. To reject an incoming call, press E.] You can mute the ringtone when a call comes in by pressing and holding the volume down side key.Shortcut to activate vibrate modeYou can activate the vibrate only mode by pressing and holding down # after opening the phone.Signal strength You can check the strength of your signal by the signal indicator on the LCD screen of your phone. Signal strength can vary, particularly inside buildings. Moving close to a window may improve reception.Entering text You can enter alphanumeric characters using the keypad.For example, storing names in Contacts, writing a message, creating a personal greeting or scheduling events in the calendar all require entering text.The following text input methods are available with the handset.
General Functions31T9 mode This mode lets you enter words with only one keystroke per letter. Each key on the keypad has more than one letter. The T9 mode automatically compares your keystrokes with an internal dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode. This is sometimes known as predictive text. If you press # key for a long time, you can activate or cancel T9 mode.ABC mode This mode lets you enter letters by pressing the key labelled with the required letter once, twice, three or four times until the letter is displayed.123 mode (Number mode) Type numbers using one keystroke per number. Changing the text input mode 1. When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the upper right corner of the LCD screen.2. If T9 is on, you can change the mode to T9Abc, T9ABC, 123, T9abc by pressing #. When T9 is off, the mode will be changed to Abc, ABC, 123, abc.Using the T9 ModeThe T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you press each key, the handset begins to display the characters that it thinks you are typing based on a built-in dictionary. As new letters are added, the word changes to reflect the most likely candidate from the dictionary.1. When you are in the T9 predictive text input mode, start entering a word by pressing 2 to 9. Press one key per letter.] The word changes as letters are typed. Ignore what’s on the screen until the word is typed completely.
General FunctionsGeneral Functions32] If the word is still incorrect after typing completely, press * once or more to scroll through the other word options.ExamplePress 4663 to type Good.Press * to get Home.] If the desired word is missing from the word choices list, add it by using the ABC mode.2. Enter the whole word before editing or deleting any keystrokes.3. Complete each word with a space by pressing 0.To delete letters, press C. Using the ABC ModeUse 2 to 9 to enter your text.1. Press the key labelled with the required letter:] Once for the first letter.] Twice for the second letter.] And so on.2. To insert a space, press 0 once. To delete letters, press C. Refer to the following table for more information on the characters available using the alphanumeric keys.Key Characters in the order displayLower case Upper case. ,? ! ‘ “ 1 – ( ) @ / : _ . ,? ! ‘ “ 1 – ( ) @ / : _a b c 2 à á â ã ä å æ ç A B C 2 À Á Â Ã Ä Å Æ Çd e f 3 è é ê ë D E F 3 È É Ê Ë g h i 4 ì í î ï G H I 4 Ì Í Î Ï j k l 5 £ J K L 5 £m n o 6 ñ ò ó ô õ ö ø oeM N O 6 Ñ Ò Ó Ô Õ Ö Ø OEp q r s 7 ß $ P Q R S 7 ß $t u v 8 ù ú û ü T U V 8 Ù Ú Û Üw x y z 9 W X Y Z 9Space, 0 Space, 0Note] The characters assigned to the keys and their order of appearance depends on the language selected using the option Input method. The table above provides the characters set for English language.
Using the 123 (Number) modeThe 123 mode enables you to enter numbers in a message(a telephone number, for example). Press the keys corresponding to the required digits before manually switching back to the appropriate text entry mode.Using the symbol modeThe symbol mode enables you to enter various symbols or special characters. To enter a symbol, select Options > Insert > Symbols. Use the navigation and numeric keys to select the desired symbol and press O.General Functions33
Overview of Menu FunctionsOverview of Menu Functions34You can launch a menu by pressing O in the idle screen. Move to the desired item and press O to go into the sub menu.From the main menu you can also go into a submenu by directly pressing the corresponding numeric key as follows. The main menu consists of the following top menus and sub menus.1.1 Games & Applications1.2 Mobile TV1. Entertainment2.1 Homepage2.2 Enter URL2.3 Bookmarks2.4 Saved pages2.5 History2.6 Browser settings2.7 Mobile TV2.8 Music2.9 Games2.10 Ringtones2.11 Pictures2.12 News2.13 Sport3.1 Recently played3.2 My music3.3 Radio DJ *13.4 FM radio3.5 My wishlist3.6 Music store3.7 Song recognition3. Music4.1 Still camera4.2 Video camera4. Camera5.1 Create new5.2 Inbox5.3 Email5.4 Drafts5.5 Outbox5.6 Sent messages5.7 Templates5.8 Emoticons5.9 Media Album *15.0 Messaging settings5. Messaging6.1 Pictures6.2 Sounds6.3 Videos6.4 Games & Applications6.5 Others6.6 External memory6. My Files7.1 Quick menu7.2 Alarms7.3 Calendar7.4 Tasks7.5 Games & Applications7.6 Memo7.7 Voice recorder7.8 Private memo7.9 Calculator7.10 Converter7.11 World time7.12 Organiser settings7. Organiser & Tools8.1 Add new8.2 Contacts list8.3 Groups8.4 Speed dial8.5 Service dial numbers8.6 Own number8.7 My business card8.8 Contact list settings8. Contacts9.1 All calls9.2 Dialled calls9.3 Received calls9.4 Missed calls9. Calls#.1 Profiles#.2 Phone settings#.3 Display settings#.4 Call settings#.5 Messaging settings#.6 Contact settings#.7 Connectivity#.8 Java settings#. Settings. USIM Tool Kit *2 /Alarms(if SAT not supported by USIM)0. Video CallNote*1. Is displayed depending on the country.*2. Is displayed only if supported by your USIM card.
Entertainment [Menu 1]Entertainment35Games & Applications Menu 1.1You can easily download games and other applications in this menu. It has two folders, Games and Applications, as default. Each folder has an embedded link for downloading games or applications. Please note that additional costs may be incurred when using online services. You can create a folder using the left soft key [Options].Mobile TV Menu 1.2You can access Mobile TV by selecting this menu.
36Homepage Menu 2.1You can launch the web browser and access the homepage of the web service provided by ] pressing the right soft key in idle mode.Enter URL Menu 2.2You can manually enter a URL address and access the associated web page. ] To enter a symbol, press the left soft key [Options] and select 1.Insert symbol from Options menu to display the symbol table] To switch input mode, press the left soft key [Options] and select 2. Input method.Bookmarks Menu 2.3You can store frequently accessed or favourite URLs/Pages. Send, Add new, Edit, Mark/Unmark or Delete operations can be performed on Bookmarks. Several preconfigured URLs are stored as bookmarks.Adding a new bookmark 1. Press the left soft key [Options] and select 2.Add new from Options menu.2. Enter the title and associated URL information.3. Press O to save.Connecting to a desired bookmark Press O to connect a desired bookmark.Sending the bookmark to others Select Send from Options menu. You can send it via Message or Email. Deleting a bookmarkSelect Delete from Options menu. You can delete multiple bookmarks using the Mark/Unmark option.Editing a bookmarkSelect Edit from Options menu. Edit the title and associated URL information. Press O to save.
37Saved pages Menu 2.4The phone can save the page on display as an offline file. Up to 20 pages can be saved.History Menu 2.5You can view the list of the pages you've already connected.Browser settings Menu 2.6You can change the settings for browser connectivity, display, security, and certificates.Profiles (Menu 2.6.1)Select the appropriate profile by pressing O. This will activate the profile to initiate the browser launch.Character encoding (Menu 2.6.2)Sets the browser default character set to one of the following: Automatic, English(ASCII), English(ISO), English(LATIN), Unicode(UCS2 BE), Unicode(UCS2 LE), Unicode(UCS2 Auto), Unicode(UTF-16 BE), Unicode(UTF-16 LE), Unicode(UTF-16 Auto), Unicode(UTF-8).Scrolling control (Menu 2.6.3)Allows you to set the scroll speed by selecting the number of lines to scroll. Select from the menu either 1 line, 2 lines or 3 lines. Show image (Menu 2.6.4)Allows you to enable or disable the image display during browsing.NoteEnabling this function will delay displaying images until the completion of transmission. Disabling this function will prevent the browser from downloading images from the server, thus allowing faster transmission.
38Cache (Menu 2.6.5) Enabling Cache allows you to store accessed pages to your phone. Once a page has been stored in the Cache it will greatly enhance the page loading speed on subsequent browsing of the same page.Cookie (Menu 2.6.6) Enabling Cookie allows you to store cookies sent from the server. Disabling this function will prevent cookies from being stored on your phone.JavaScript (Menu 2.6.7)Select whether to turn JavaScript On or Off.Reset settings (Menu 2.6.8)Select this to reset your phone to its default browser configuration.Security (Menu 2.6.9)CertificatesIf stored, a list of root/ca certificates required for WTLS/TLS can be found here. Certificates can be viewed from the list.Session clearSecure (WTLS/TLS) session data can be cleared using this option. Session data should be cleared to establish a new secure session.Mobile TV Menu 2.7Use this menu to access the online TV service. You can watch TV and use various Mobile TV services. For further details, please contact your Service Provider.Music Menu 2.8Use this menu to enjoy music files and listen to
39Games Menu 2.9 website.Ringtones Menu 2.10 website.Pictures Menu 2.11 website.News Menu 2.12 to get recent news events.Sport Menu 2.13 to get the latest sports news.
Recently played Menu 3.1 This menu shows the last 20 tracks that were played. And, if it starts to play, the menu "Now playing" will be displayed.You can activate media player on playing through Now playing menu.My music Menu 3.2 All tracks (Menu 3.2.1)You can view all the music files stored in the phone/external memory.Playlists (Menu 3.2.2)You can create your own playlists by choosing tracks from the All tracks menu list.Artists (Menu 3.2.3)You can view and play music sorted by Artists.Albums (Menu 3.2.4)You can view and play music sorted by Albums.Genres (Menu 3.2.5)You can view and play music sorted by Genres.Shuffle tracks (Menu 3.2.6)If you want to play the music continuously and randomly, select this option.Radio DJ Menu 3.3(Dependent on network service) interactive, personalised music service, to listen to your favourite tracks, discover new music and create your personal channels. You can also download music files you have just heard on the radio.Please contact your service provider for further details.] The radio station and the network service must support this service.Music [Menu 3]Music40
Music41My channels (Menu 3.3.1)Allows you to create your own favourite channels and listen to them.RDJ channels (Menu 3.3.2)Use this menu to listen to stations preset by RDJ compilations (Menu 3.3.3)Use this menu to listen to pre-defined collection based on different themes or genres.My account (Menu 3.3.4)This menu allows you to check the status of your account subscription.Note• This menu may not be available, depending on the country.• The menu name may be labelled differently in some countries.FM radio Menu 3.4 Options Select BackTitle DescriptionsFrequency Shows the frequency indicating the current cursor.VolumeControlling the volumeChannelFM frequency and channel number which is now playingIf you press options, you can view the menus as follow:] Edit channel: You can edit the selected channel.] Auto scan: You can search for available channels by scanning automatically.] Reset channels: You can reset the channels.] Listen via: You can listen the FM radio via speaker or headset.
MusicMusic42My wishlist Menu 3.5When listening to Radio DJ, the user is able to add a track to their wishlist to mark it for later purchase and download.Note• This menu may not be available, depending on the country.• The menu name may be labelled differently in some countries.Music store Menu 3.6 NoteAdditional charges may be incurred when downloading music.Contact your service provider for further information.Song recognition Menu 3.7 Selecting this menu starts dialling a number for song recognition. For further information, please contact your service provider.
CameraCamera [Menu 4]43Still camera Menu 4.1This application enables you to take a still picture. You can take a picture in the size you want, and use it for the address book photo, home screen and other more general purposes. Once taken, the picture can be sent by Message, Postcard, Email or Bluetooth O.Options Take BackPress O to take a picture.Brightness: From –2.0 to 2.0 at 0.5 intervals. The higher the level, the brighter the screen.Zoom: x1, x2 (Note: Available zoom level depends on the size.)] You can zoom in with U / zoom out with D in preview mode.1. Press the left soft key to access Options and set the desired environment as follows. ] Move between the options menus with L/R.] Select the desired value with U/D and confirm the selection with O.
CameraCamera44Menu DescriptionGo to The Pictures folder is launched and displays existing pictures as thumbnails.You can view pictures by pressing O. You can also send the selected picture to another party via Message, Postcard, EMail or Bluetooth.Size 1600x1200( ), 1280x960( ), 640x480( ), Wallpaper( ), 176x144( ), Contact( )Quality Super fi ne ( ), Fine ( ), Standard ( )Burst shot One, Three ( ), Six ( ), Nine ( )(Note: Available Burst shot depends on the size.)Zoom x1 ( ), x2 ( ) (Note: Available zoom level depends on the size.)] You can zoom in with U / zoom out with D in preview mode.Brightness From –2.0 to 2.0 at 0.5 intervals. The higher the level, the brighter the screen. Menu DescriptionWhite balance You can adjust the tone of the background photo according to the weather.Auto, Daylight, Cloudy, Illuminate, IndoorsNight mode You can take better pictures at night by selecting On.Frame Shot You can apply one of 10 frame effects when taking a picture. (available only in case of Wallpaper size)Timer You can delay the camera shutter time. None, 3 secs., 5secs., 10 secs.“” is shown when the timer is activated.Effect None, Black & White, Negative, SepiaSound Select the desired shutter sound.Memory Select the desired memory, either Handset or External.Mirror You can activate the mirror effect by selecting On.Swap cam You can switch the camera to activate either the Internal or the External camera.
Camera452. After finishing all the settings, press the right soft key [Close].3. Focus the camera on what you want to take and press O.4. Press O to save the picture. It is saved in the Pictures folder of My Files. NotePress the right soft key [Back] to go back to the preview mode without saving the picture.
CameraCamera46Video camera Menu 4.2This application enables you to record a video clip. You can play and watch a saved video file in this menu. Once recorded, a video clip can be sent by Message, Email or Bluetooth.Brightness: From –2.0 to 2.0 at 0.5 intervals. The higher the level, the brighter the screen.Zoom: x1, x2 (Note: Available zoom level depends on the size.)] You can zoom in with U/ zoom out with D in preview mode.Options Rec BackPress the O to record the image.1. Press the left soft key to access Options and set the desired environment as follows. ] Move between the options menus with L/R.] Select the desired value with U/D and confirm the selection with O.
Camera47Menu DescriptionGo to The Videos folder is launched and displays existing videos as thumbnails. You can view videos by pressing O. You can also send the selected video to another party via Message, Email or Bluetooth.Size 320x240 ( ), 176x144 ( ), 128x96 ( )Quality Super fi ne ( ), Fine ( ), Standard ( )Zoom x1 ( ), x2 ( ), x4 ( ) (Note: Available zoom level depends on the size.) ] You can zoom in with U / zoom out with D in preview mode.Brightness From –2.0 to 2.0 at 0.5 intervals. The higher the level, the brighter the screen. Menu DescriptionWhite balance You can adjust the tone of the background video according to the weather.Auto, Daylight, Cloudy, Illuminate, IndoorsNight mode You can take better shots at night by selecting On.Effect None, Black & White, Negative, SepiaDuration Select the desired recording time.Message, 30 secs., 1min, 2mins., 5mins., 60 mins.Memory Select the desired memory, either Handset or External.Mirror You can activate the mirror effect by selecting On.Mute Decide whether to record the sound or not.Swap cam You can switch the camera to activate either Internal or External.
CameraCamera482. After finishing all the settings, press the right soft key [Close].3. Focus the camera on what to record and press O to start recording. And press O to stop recording.] You can pause the recording by pressing the left soft key [Pause].4. Press O to save the video clip. It is saved in the Videos folder of My Files. NotePress the right soft key [Back] to go back to the preview mode without saving the video clip.
MessagingMessaging [Menu 5]49Create new Menu 5.1 Message (Menu 5.1.1)You can write and edit a message containing a combination of text, image, video and audio.1. Enter your message in the Message field.Option menus in Message field] Insert: You can perform the following actions:1. Image: You can insert an image. (Existing image/Take picture)2. Video: You can insert a video clip. (One video clip per slide)3. Sound: You can insert a sound file. (One sound per slide)4. Symbols: You can insert symbols. After entering the corresponding number keys, press O.5. Template: You can insert a text template saved on the phone. After selecting a template, press O. The selected template is inserted into the Message window.6. Emoticon: You can insert an emoticon on writing a message.7. Name & number: After searching the name and the number in phonebook, you can insert the entry.8. New slide: Select this to add a new slide.9. Subject: Select this to insert a subject.] Save to drafts: Select this to save the message to drafts.] Input method: Select the desired dictionary mode.] Writing language: You can select the language for writing a message.] Add to dictionary: You can add a word to the dictionary.2. Press the right soft key [Back] to exit the menu or go to previous menu after setting submenus.
MessagingMessaging503. Press the confirmation key [Send] to send the message. The message will automatically be saved in the Sent Items folder. If the message has not been sent, it will remain in the Outbox with a failed status.Email (Menu 5.1.2)To send/receive an Email, you should set up the Email account. (Refer to page 61-62 for how to set up an Email account.)1. Enter the Email addresses of the recipients in the To, Cc, Bcc fields. You can search the Contacts by pressing O.Note• Enter the reference Email address to forward the Email in Cc(Carbon copy) field.• Enter a hidden reference Email address to forward the Email without forwarding information in Bcc(Blind Carbon Copy) field.• Only valid Email addresses are allowed for the recipient (To), reference address (Cc) and hidden reference address (BCC) fields. When an Email address has been specified, another field where you can specify another address appears. You can specify up to 20 recipients for the To and Cc address fields and 10 recipients for the BCC address field.2. Move the cursor to the Subject field and key in the subject. 3. You can enter the message contents by moving the cursor to the Message field.4. Use the following functions by using the left soft key [Options].] Insert: Select this menu to insert special characters, templates, and contacts. It is also possible to attach multimedia files (pictures, videos and sounds).] Search contacts: Select this menu to insert Email addresses saved in Contacts. (Only shown in Option menu when cursor is located in To/Cc/Bcc fields.)] Recently used: You can use the latest Email address you saved temporarily. ] Save to drafts: Select this menu to save the message in Drafts.] View attachment: Shows the attached files. (This item is only available when some files have been attached.)
Messaging51] Remove: Deletes the attachment file. (This item is only available when the files are already attached.)] Input method: Select the desired dictionary mode.] Add to dictionary: You can add a new word to the dictionary.] Writing language: You can change the writing language.] Set mail priority: You can configure the priority of the Email you wish to send.5. When you have finished writing an Email, press O to send the Email.Postcard (Menu 5.1.3)(Note: This service is not available in all countries. Please contact your service provider for further information.)1. Enter the Postcard menu.2. You can view option menus in Message field as follow:] Insert: You can perform the following actions:- Image: You can insert an image. (Existing image/Take picture)- Symbols: You can insert symbols. Press the number keys corresponding the symbol.- Template: You can insert a text template saved in the phone. The selected template is inserted into the Message window.- Emoticon: You can insert an emoticon on writing a message,- Name & number: After searching the name and the number in phonebook, you can insert the entry.] Save to drafts: Select this menu to save the message in drafts.] Input method: Select the desired dictionary mode.] Writing language: You can select the language for writing a message.] Add to dictionary: You can add a word to the dictionary.
MessagingMessaging523. After an image is inserted, the format will be changed to Postcard format .4. Fill out the fields: Name, Additional info, Address, Post code, City, State, Country.5. Press the confirmation [Send] to send the created postcard.Voice message (Menu 5.1.4)You can send the message with a recorded voice.1. Enter the voice message menu.2. Press the centre key to record your voice message.3. Press the centre key to stop the recording. For sending the message directly, press the centre key once again.4. If you want to preview the message or save it to drafts, press the left soft key [Options].Inbox Menu 5.2 1. You can view received messages. Select a message and then press O to view the message.2. You can view the previous or next message by using L / R.3. To view a multimedia message (Notification), select Retrieve in the message notification view screen. The file is then transmitted, and you can view the file when the transmission is complete.You can use the following functions by using the left soft key [Options] in the Inbox.] Reply to: Creates a reply to the sender or all recipients of the selected message.] Forward: Forwards the selected message. ] Make video call: You can make a video call.] Delete: Deletes the current message.] Create new message: You can write a new message or an Email.] Copy: In case of SMS, you can copy the message into handset or USIM.
Messaging53] Move: In case of SMS, you can move the message into handset or USIM.] Filter: Displays messages by desired message types.] Mark/Unmark: You can select one or more messages for multiple deletion.] Message information: You can check the message type, date and time and where it is saved.] Media album: (Note: This service is not available in all countries. Please contact your service provider for further information.) Accesses the remote media album.NoteNot supported for multimedia message (Notification) and WAP push messages.Email Menu 5.3 Viewing Email message list1. Select an Email account and then press O to view the received Email list.2. In Email list, you can use the following functions by using the left soft key [Options].] Reply: Creates a reply to the selected Email.] Forward: Forwards the selected Email message to others.] Retrieve (POP3 only): Retrieves new Email messages.] Copy to (IMAP only): Copies the selected email .] Search: Searches the Email you want to find out.] Delete: Deletes the Email.] Delete from server (POP3 only): Deletes the message or Email from server.NoteYou can check the saved emails in Email [Menu 5.6].
MessagingMessaging54] Create new message: Creates a new message or Email.] Mark/Unmark: Use mark/unmark option for multiple deletion.] Set as read/unread: You can set the selected Email to read or unread.] Sort by: You can sort Email according to the conditions.] Expunge (IMAP only): Removes the selected Email data at a time.] Message synchronisation (IMAP only): Synchronises Email to retrieve Email server.] Message information: Brief information on the message including size, type, date, time and filenames.Viewing an Email message1. Select one of the received Emails and press the View key to receive the contents of the Email.2. The contents of the received Email are automatically displayed in the View screen.3. You can view the contents of the previous or next Email by using L / R.4. In the Email View screen, you can select the following functions by using the left soft key [Options].] Reply to: Creates a reply to the selected Email. ] Forward: Forwards the selected Email message to others.] Save address: Saves the sender's address to Contacts.] Delete: Deletes the Email.] Extract: Extracts the number, Email address or Web address from Email message.] View attachment: Shows the attached file.] View recipients: Shows the Email addresses of the recipients and reference (Cc).] Create new message: Creates a new message.] Message infomation: Brief information on the message including size, type, date, time and filenames.
Messaging55Drafts Menu 5.4 You can view saved messages. Select a message and then press O to edit the message.You can use the following functions by using the left soft key [Options].] Send: Sends the selected message.] Delete: Deletes the selected message.] Create new message: You can write a new message or an Email.] Mark/Unmark: You can select one or more messages for multiple deletion.] Filter: Displays messages by desired message types.] Message information: You can check the message type, date, time, size and where it's saved. Outbox Menu 5.5 The Outbox is a temporary storage place for messages waiting to be sent. Failed messages are also placed in Outbox. For example, Emails will be placed in Outbox if the Email account is not correctly configured.1. Select a message.2. You can use the following functions by using the left soft key [Options].[For sending / waiting messages] ] Create new message: You can write a new message or an Email.] Cancel sending: You can stop sending/waiting status.] Message information: Message information: You can check the message type, date, time, size and where it's saved.[For a failed message]] Resend: Resends the selected message.] Delete: Deletes the current message.] Save to drafts: You can send the message to drafts.
MessagingMessaging56] Create new message: You can write a new message or an Email.] Message information: You can check the message type, date, time, size and where it's saved.Sent messages Menu 5.6 Shows the messages you sent (Message/Email/Postcard/Voice message).[Options]] Reply to: Creates a reply to sender or all recipients of the selected message.] Forward: Forwards the selected message.] Edit: You can edit the selected message.] Delete: Deletes the selected message.] Create new message: You can write a new message.] Mark/Unmark: You can select one or more messages for multiple deletion.] Filter: Displays messages by desired message types.] Message information: You can check the message type, date, time, size and where it is saved.Templates Menu 5.7 Text templates (Menu 5.7.1) You can add, edit, and delete frequently used useful phrases using the left soft key [Options].NoteDepending on your service provider, useful phrases are saved as a default.Multimedia templates (Menu 5.7.2) You can create, edit and view available templates when creating multimedia messages. Five types of template (Birthday, Greeting, Holiday, Thanks, Sorry) are saved by default.The following options are available.] Add new: You can create a new multimedia template.
Messaging57] Write multimedia message: Creates a multimedia message with the selected template.] Edit: Edits the selected template.Emoticons Menu 5.8 You can add, edit and delete emoticons. You can insert the emoticon which you preferred on writing a message. If you press confirmation key, you can view the icon.Media Album Menu 5.9 (Note: This service is not available in all countries. Please contact your service provider for further information.)Accesses the remote media album.Messaging settings Menu 5.0 Text message (Menu 5.0.1)You can configure text message related options.1. Text message centre: Input the address of the Text message centre.2. Delivery report: By enabling this option, you can verify whether your message has been sent successfully.3. Validity period: This network service allows you to set how long your text messages will be stored at the message centre.4. Message types: Text, Voice, Fax, X.400, Email Usually, the type of message is set to Text. You can convert your text into alternative formats. Contact your service provider for the availability of this function.5. Character encoding: Auto/ Default alphabet.] Auto(default): Message with single byte character is normally encoded in Default alphabet(GSM7). Message with double-byte character is automatically encoded in unicode(UCS2).] Default alphabet: Message with even double byte character is encoded in single byte. Please note that double byte characters with accent may be converted into single byte character without accent.
MessagingMessaging586. Send long text as: Select a long text message as Multiple SMS or MMS.Multimedia message (Menu 5.0.2) You can configure Multimedia message related options.1. Retrieval mode: You can set the retrieval mode using Home network and Roaming network respectively. If you select Automatic, you will receive multimedia messages automatically. If you select Manual, you will only receive a notification message in the inbox and then you can decide whether to download multimedia messages or not.2. Delivery report: Allows you to determine whether to request a delivery confirmation mail to a recipient, and whether to allow sending a delivery confirmation mail to a sender.] Request report: Determines whether to request a delivery confirmation mail for a Multimedia message.] Allow report: Determines whether to allow sending a delivery confirmation mail for a delivery confirmation mail request.3. Read reply: Allows you to determine whether to request a read confirmation mail to a recipient, and whether to allow sending a read confirmation mail to a sender.] Request reply: Determines whether to request a read confirmation mail for a Multimedia message.] Allow reply: Determines whether to allow sending a read confirmation mail for a read confirmation mail request.4. Priority: You can select the priority level of the messages (Low, Normal and High).5. Validity period: Allows you to configure the term of validity for a message when transmitting a multimedia message. The message would be saved in the multimedia message server only for the configured term.6. Slide duration: Allows you to configure the duration of each page when writing a message.7. Creation mode: Allows to select the contents type supported by MMS. (Restriced,Warning and Free)
Messaging598. Delivery time: Configures the delivery time of message to the recipient. The Multimedia message centre will deliver the message after the delivery time.9. Multimedia message centre: Allows you to configure network information such as the MMSC and the WAP gateway, to send a multimedia message. Using the left soft key [Options], you can activate, add or delete a profile. A profile name selected by a checkmark is the currently configured value. You can view and edit the contents of the profile in edit mode by pressing the right soft key [Edit]. The edit screen also appears when creating a new profile under Options. The meaning of each item is given below.] Title: Profile name.] MMSC URL: Enter the multimedia message centre URL.] MMS Proxy: Enter the WAP gateway address and port number.] Connection mode: Select one of the connection mode. (TCP with Proxy, TCP without Proxy, UDP)] Access points: Specify the access point name. (see WAP connection settings.)Press the right soft key [Done] to save the changes and complete Multimedia msg. centre setting.Email (Menu 5.0.3) You can configure settings for receiving and transmitting emails. (Note: This service is not available in all countries. Please contact your service provider for further information.)2. Email accounts: You can create or configure an Email account including the Email server and user ID. You can edit a selected Email account by pressing the left soft key[option]- 2.Edit. You can select an Email account to be used to send an Email using O. You can select the following functions using the left soft key [Options].] Add: Create a new Email account.] Edit: To edit the selected Email account.] View: Views a selected mail.
MessagingMessaging60] Mark/Unmark: Use mark/unmark option for multiple deletion.] Delete: Deletes a selected Email account. All the emails included in the account will be deleted.3. Allow reply Email: Determines whether to allow sending a read confirmation mail for a read confirmation mail request.4. Request reply Email: Determines whether to request a read confirmation mail.5. Retrieve interval: You can configure Retrieve interval to retrieve emails automatically from the incoming mail server. When a new Email arrives, an icon appears at the top of the screen. You can select the auto receiving time slot to Off, 15 minutes, 30 minutes, 1 hour, 2 hours, 4 hours or 8 hours. Please note that additional charges may be incurred using the Retrieve interval feature.6. Include original message: Determines whether to include the original message when you forward the message or reply to it.7. Include attachment: Determines whether to include the attachment file when you forward the message.8. Auto retrieval in roaming: Retrieves Email account automatically when you move in roaming area.9. Auto Download option: You can set the configuration of downloading the contents for CPE.10. New Email noti. info: Receives the notification information when arriving new Email.11. Signature: You can configure a text signature to be attached to the end of an Email. The configured signature text is automatically or manually attached to the end of the Email when it is sent.12. Priority: You can select the priority level of Emails (Low, Normal and High).
Messaging61Creating a new Email account1. Select Add new from the Email account menu options.2. The following items need to be configured.Title Enter a title.Username Enter the user name of the Email account.Password Enter the Email account password.Email address Enter the Email address for outgoing mail.Reply Email addressEnter the Email address to reply to your Email.Outgoing mail serverEnter the outgoing Email server.Incoming mail serverEnter the incoming Email server.Maximum receive sizeSelect the maximum Email receive size using the left soft key. The permissible maximum receive size is no more than 1MB.Mailbox type Select the Email inbox type either POP3 or IMAP4 using the left soft key.Save to server Determine whether to leave a copy of messages on the incoming server or not using the left soft key. When the mailbox type is set to IMAP4, a copy of messages are always saved to the server.Save sent mail intoSelect where to save the sent mails (when the mailbox type is set to IMAP4). When the mailbox type is POP3, sent mails are always saved into handset.Access points Select an access point to connect to the Internet. You can select a confi gured access point using the left soft key.Retrieve interval Sets the interval duration to retrieve Email server.Advanced settings Sets the confi guration to connect Email server.SMTP port numberEnter the mail server port number. In general, the SMTP (Outgoing mail server port number) is 25.Incoming server portEnter the mail server port number. In general, the incoming mail server port number is 110(POP3) or 143(IMAP4).SMTP authenticationDecide whether the outgoing mail server to require authentication or not using the left soft key. When the SMTP authentication is set to On, you can enter the SMTP Username and SMTP Password for SMTP authentication.SMTP username Enters SMTP user name to require authentifi cation.SMTP password Enters SMTP password to require authentifi cation.APOP secure loginDecide whether to activate APOP secure login or not using the left soft key. When the mailbox type is IMAP4, APOP secure login is always set to OFF.
MessagingMessaging623. Press the centre soft key [Save] to complete the Email account configuration. Editing an Email account1. Select a desired Email account from the Email account list and press the left soft [Options] then select Edit.2. You can edit desired fields by moving the cursor up and down.3. When configuration is complete, press the centre soft key [Save] to complete the Email account configuration.NoteWhen you try to change the mailbox type, all emails downloaded before would be deleted.Info. service (Menu 5.0.4) ] Cell broadcast: You can set the reception status.] Channels: You can add or modify the channels.] Languages: You can select the language you want by pressing O. Then, the info service message will be shown in the language that you have selected.Service message (Menu 5.0.5) You can configure the service message receipt option.
My FilesMy Files [Menu 6]63Pictures Menu 6.1 The Pictures folder consists of embedded links for downloading pictures through the Internet and Default images.Pictures taken using the camera are stored in the Pictures folder and you can create new folders to manage them. You can also send multiple files to other people.To view the picture in details, press the confirmation key. When a file is selected, the following options will be displayed by pressing the left soft key [Options].] Send: You can send the selected image via Message, Postcard, Email or Bluetooth.] Use as- Home screen: You can set an image as the home screen theme.- Contacts image: You can set the image of selected entry in contacts. When incoming a call, the image saved in contact is displayed.- Start up image: You can set an image as shut up screen theme.- Power off image: You can set an image as shut down image.] Move: Enables the file to be moved to other folder.] Copy: Enables the file to be copied to other folder.] Delete: Deletes the selected image.] Mark/Unmark: Using the Mark function, you can send, delete, move and copy multiple files.] File- Rename: You can rename the image.- Edit: Enables the image to be edited.NoteEdit menu is not displayed in default images folder.- File info.: Shows information on the selected image file.
My FilesMy Files64] Create new folder: You can create a new folder within the folder currently selected.] Slide show: You can view the images as a slide show.] Sort by: You can sort the files by date, file type or name.] List view/Grid view: You can view the images as a List view or Grid view.] Memory status: You can view the memory status (handset or external memory card).Sounds Menu 6.2 The Sounds folder consists of embedded links for downloading ringtones and music as well as folders containing the Default sounds and Voice recordings. Here you can manage, send or set sounds as ringtones.When a file is selected, the following options will be displayed by pressing the left soft key [Options].] Use as- Voice ringtone: You can set the sound file as a ringtone when incoming a voice call.- Video ringtone: You can set the sound file as a ringtone when incoming a video call.- Message tone: You can set the sound file as a ringtone when receiving a message.- Start up sound: You can set the sound file as a ringtone when handset starts up.- Power off sound: You can set the sound file as a ringtone when handset shut down.] Sort by: You can sort the files by date, file type or name.] File info.: Shows the information on the selected sound file.] Memory status: You can view the memory status (handset or external memory card).
My Files65Videos Menu 6.3 Here you can manage or send downloaded or captured videos clips.If you press O [Connect], you can activate the video file. The following are available using the left soft key [Options] in the Video list.] Send: You can send the selected video clip via Message, Email or Bluetooth if not protected by Digital Rights Management (DRM).] Use as: You can set the video file as voice ringtone or video ringtone.] Move: Moves the file into handset memory or external memory.] Copy: Copies the file in handset memory or external memory.] Delete: Deletes the selected video.] Mark/Unmark: Using the Mark function, you can send, delete, move and copy multiple files.] File- Rename: You can rename the video.- File info.: Shows information on the selected video file.] Create new folder: You can create a new folder.] Sort by: You can sort files by name, date, or file type.] List view/Grid view: You can view the images as a List view or Grid view.] Memory status: Displays the memory status (handset or external memory card).You can view a video using the video player. Video files are displayed in the list as thumbnails. You can select a desired video by using the U / D / L / R. Select a desired video and select Play to view the recorded video.Select the left soft key [Send] to attach the selected video to a message, Email or Bluetooth.When option 1. Play is selected, the video clip will be played with the Media Player. To pause the playback, press O during the playback. To resume the paused playback, press O once again.
My FilesMy Files66To capture the screen shot, press the right soft key [Capture] when the playback is paused.To view the current playback in full screen, press the right soft key during the playback.To return to the previous screen size, press the right soft key once again in full screen mode.When viewing video clips in the Media Player, the following options are available:] Wide view: You can view the video in wide view mode.NoteYou can also view the video in wide view mode by pressing # key.] Mute/Unmute: If the Volume is set to more than 0, Mute mode is activated and if the Volume is set to 0, the Unmute mode is activated. ] Capture: You can save what is on the paused screen as an image file (only possible in Pause mode).] Repeat: You can set the repeat option (None/Current file/All files).] File info.: You can check information on files being played (File name, Size, Date, Type, Duration, Protection).] Send: You can send the video via Message, Email or Bluetooth if the file is not protected by Digital Rights Management (DRM).] Delete: Deletes the selected video.] Use as: You can set the video file as voice ringtone or video ringtone. This menu is dependent upon the contents.Games & Applications Menu 6.4 You can easily download games and other applications in this menu. It has two folders, Games and Applications, as default. Each folder has an embedded link for downloading games or applications. Please note that additional cost may be incurred when using online services. You can create a folder using the left soft key [Options].
My Files67Others Menu 6.5 Other files except pictures, sounds, videos, games & applications are stored in this folder. External memory Menu 6.6 If you purchase an optional external microSD memory card, you can manage more content. Refer to the section How to use a microSD memory card on page 22 and 23 to learn how to insert and remove the memory card. You can manage content as you do on your phone.
Organiser & Tools [Menu 7]Organiser & Tools68Quick menu Menu 7.1 You can specify functions to save in the Quick menu. If you save the functions frequently used in the Quick menu, you can quickly start the functions simply by pressing key.Alarms Menu 7.2 If you set the alarm, the appears on the indicator bar. The specified alarm sounds at the scheduled time. Press O to stop the alarm, and the alarm is released. Press the right soft key [Snooze] and choose the snooze interval. The alarm sound stops and resumes after the selected Snooze duration. You can configure up to 5 alarms.1. Select your desired alarm to configure in the alarm list. If there is no alarm, press the left soft key [Add] to add a new alarm.2. Set/Cancel alarm: Set or cancel the alarm using the options for specifying whether the alarm is on or by choosing the alarm time.3. Input alarm time: Input your desired alarm time by specifying Hour and Minute. Choose either ‘AM’ or ‘PM’ which is visible if 12 hour format is specified for the phone.4. Select repeat mode: Select the desired repeat mode using L / R or select the desired one from the list by pressing left soft key [List].5. Select bell: Select the bell to ring at the alarm time opening the list by pressing left soft key [Edit].6. Input memo: Input alarm name.7. Snooze: You can set the snooze duration for the alarm.8. When you have finished setting the alarm, press the centre key [Save].NoteThe alarm will go off even when the phone is switched off.
Organiser & Tools69Calendar Menu 7.3 Schedule inquiry and search1. Reference by MonthsYou can refer to your schedule by months. The cursor is on the current date, and the registered date is marked. The schedule saved for the date where the cursor is located is represented by a grey box. Pressing the shortcut key 1 moves to the previous year and pressing 3 move to the next year and pressing 5 moves to today. Pressing 7 moves to the previous month, and 9 moves to the next month. Pressing * moves to the weekly calendar. You can move the date using U / D / L / R.2. Detailed referenceYou can refer to a detailed schedule, that is the whole contents of the schedule configured by the user. You can send the schedule to another phone or an Internet site through SMS (Text message) or MMS (Multimidia message) or Email or Bluetooth using the left soft key [Options].Add new eventYou can add an event. You can configure the start date, end date, start time, end time, contents, type of event, repetition, alarm of the schedule.] Set type: Appointment, Anniversary, Birthday ] Set repeat: Once, Daily, Weekly, Monthly, Annually, User setting] Set alarm: No alarm, On time, 15 mins before, 30 mins before, 1 hour before, 1 day before, 3 days before, 1 week beforeDelete all schedulesYou can delete all saved schedule contents using this function.Set up and release holidayYou can set up or release user holidays. Press the left soft key [Options] and select Set holiday. The selected date will be displayed in red.To release the holiday, press the left soft key [Options] and select Clear holiday.
Organiser & ToolsOrganiser & Tools70Schedule notificationIf the user has configured the alarm setting, the specified alarm sound will ring. If the notification time is before the schedule start time, you can set up the alarm again.Tasks Menu 7.4 You can view, edit and add tasks to do. Tasks are displayed in time order. Tasks that have been completed or not completed are displayed in different ways.AddTo add a task, press the left soft key [Options] in the Tasks list management screen and select Add new event option. Then input the date, description and priority for the task.When you have finished entering the data, press the centre key [Save] to save the new task.Detailed view and EditTo view detailed task contents, locate the cursor on the desired item in the Tasks list, and then press the centre key. You can send, edit and delete a task using the left soft key [Options]. Set job statusTasks set as finished are displayed as crossed out below the unfinished tasks in the Tasks list. You can set Finished tasks to Not finished by selecting Options.Games & Applications Menu 7.5 You can easily download games and other applications in this menu. It has two folders, Games and Applications, as default. Each folder has an embedded link for downloading games or applications. Please note that additional cost may be incurred when using online services. You can create a folder using the left soft key [Options].
Organiser & Tools71Memo Menu 7.6 Using the memo management function, you can view and manage saved memo contents, and add new memo.Add memoTo add a new memo, press the left soft key [Add] or [Add new memo] in Options. Enter the contents of the memo. You can save the memo to the list by pressing the centre key [Save].Edit and delete memoHighlight the desired memo and press O to view its contents. You can edit or delete the contents of a memo using the left soft key [Options]. You can return to the memo management screen by pressing right soft key [Back]. You can select Multiple or All memos using the Mark/Unmark option and then delete a memo using the Delete option.Voice recorder Menu 7.7 1. Press the left soft key [Option] to display the option pop up menu before recording.2. Move to the desired menu item using U / D and press O.] Duration: You can set the recording duration to MMS msg. size, 30 secs, or 1 min.] Quality: You can select a recording quality from Super fine, Fine, and Normal.] Go to my sounds: Opens the Voice recordings folder in Sounds.3. Pressing O starts recording. When a recording is started, the recording time appears on the LCD. To cancel the recording, press the Back.4. When you finish the recording, press O to exit. The recorded file is automatically saved in the Voice recordings folder in My files. If you press O again, you can start recording new voice.5. Press the left soft key to select the various options after the voice recording.
Organiser & ToolsOrganiser & Tools726. Select the desired menu using U / D and press O.] Play: You can play the voice.] Send: To send the recorded file. Select one from Message, Email and Bluetooth using U / D and press O.] File: You can change the name of file and view the information.] Delete: Select this menu to delete a recorded file.] Use as: You can set the recorded file athe Voice Ringtone, Video Ringtone. ] Go to my sounds: Opens the Voice recordings folder in My Files.7. Press the right soft key to close the sub-menu popup window.Private memo Menu 7.8 You can write the private memo to protect your privacy. You enter the security code to use this menu.Add private memoTo add a new memo, press the left soft key [Add] or [Options]. Enter the contents of the memo. You can save the memo to the list by pressing the centre key [Save].Edit and delete a private memoHighlight the desired memo and press O to view its contents. You can edit or delete the contents of a memo using the left soft key [Options]. You can return to the memo management screen by pressing right soft key [Back]. You can select Multiple or All memos using the Mark/Unmark option and then delete a memo using the Delete option.
Organiser & Tools73Calculator Menu 7.9 The calculator module allows you to perform basic arithmetic functions such as addition, subtraction, multiplication, and division as well as some scientific functions. (sin, cos, tan, log, ln, exp, sqrt, deg, rad)1. Press the left soft key [Options].2. Select the appropriate function.You can enter numbers by using the number keys, and the operators by using U / D, L / R. You can enter a decimal point by pressing #. Whenever you press C, characters are sequentially deleted in reverse order. Whenever you hold C down, all the characters are deleted in reverse order in one go.When calculation is complete and the result is displayed on the screen, pressing a symbol saves the result into the symbol, and continues calculation.Converter Menu 7.10 Using this menu, users can convert Currency, Surface, Length, Weight, Temperature, Volume and Velocity.1. Select the unit menu.2. Users can set a exchange rate using option menu.3. Enter the current rate, and then you can convert from one currency to another.4. You can view the value of units.5. Press [Reset] to clear the current input Field.6. To exit the conversion function, press the [Back] key.World time Menu 7.11 The World clock function provides time information on major cities worldwide.1. You can select a desired city as a base using the left soft key Options > Add city or Options > Add city > Press the left soft key [Map].
Organiser & ToolsOrganiser & Tools742. You can Change the city using the left soft key Options > Change city or Change current city.3. You can apply to Daylight Saving time using the left soft key Options > Daylight saving.4. You can Select the Analog clock mode Options > Analog clock.Organiser settings Menu 7.12 Calendar settings (Menu 7.12.1)You can set the configurations to view the calendar.] Default view: You can set the default value to view a calendar; Month view, Week view] Week start time: 1AM, 2AM, 3AM, 4AM, 5AM, 6AM, 7AM, 8AM, 9AM, 10AM, 11AM, 12PM] Week starts on: You can set the default day to start a week; Sunday, MondayBackup calendar & tasks (Menu 7.12.2)You can create the backup files of the calendar or tasks entries saved in the phone when you insert an external memory.Restore calendar & tasks (Menu 7.12.3)You can reset the backup files of calendar or tasks when you insert an external memory.Memory info. (Menu 7.12.4)You can view the infrmation of available memory regarding Calendar, Tasks, Memo and Secret memo.
ContactsContacts [Menu 8]Add new Menu 8.1 You can register a new contact address. You can enter the name, different phone numbers and Email addresses of a new contact. You can also assign the contact to groups, include an image or avatar, assign a specific ringtone and even enter a memo for the contact. Other available fields include Home page URL, Home address, Company name, Job title and company address. You can enter and manage contact addresses depending on the memory usage.Contacts list Menu 8.2 Performs the contact address search function. The search operation is performed based on a first name as a default. The current search method and results found are displayed in the Search window. You can make a phone call or send a message to the selected phone number. A Contacts search can be performed based on the phone number or group information.NoteIn Settings menu, the search operation can be performed based on the last name.Groups Menu 8.3 Using this menu you can manage group information (both stored in the Handset and the USIM). In the handset memory, there are 5 default groups: Family, Friends, Colleagues, School and VIP. You can add, edit and delete groups. When a ringtone for a number is not specified, a call from the number sounds the group ringtone assigned to the number for the group.Speed dial Menu 8.4 Using this menu you can manage speed dials. Speed dials are configured between 2-9. You can register speed dials for a specific contact address up to 5 different numbers, and a contact address may have multiple speed dials.75
ContactsContacts76Service dial numbers Menu 8.5 You can view the list of Service Dialling Numbers (SDN) assigned by your service provider (if supported by the USIM card). Such numbers include emergency, directory enquiries and voice mail numbers. After selecting a service number, press S to dial the service. Own number Menu 8.6 Allows you to display your phone number in the USIM card. You can save own numbers being used in the USIM card.My business card Menu 8.7 You can create your own business card by pressing the left soft key Add. After entering the name, number, Email and image, you can use it as a business card when sending the message.Contact list settings Menu 8.8Display data (Menu 8.8.1) ] View contacts from: Select which contact information shall be displayed (from handset memory, from USIM card or both). All is the default setting. ] Name display: You can set the display order by name.] Show image/avatar: Select whether to display image/avatar or not.Synchonise contacts (Menu 8.8.2)(Note: This service is not available in all countries. Please contact your service provider for further information.)You can send the contents of phonebook to the server directly.Copy (Menu 8.8.3) You can copy contacts from the phone memory to the USIM or from the USIM to the phone memory. You can copy all or selected entries at a time.
Contacts77Move (Menu 8.8.4) You can move contacts from the phone memory to the USIM or from the USIM to the phone memory. You can move all or selected items at a time. Backup contacts (Menu 8.8.5) You can save all phonebook data in handset to external memory card by formatting vcard.Restore contacts (Menu 8.8.6) You can restore all phonebook data in external memory card to phone memory by formatting vcard.Clear contacts (Menu 8.8.7) Clears all contact information. You can delete all contacts saved in the mobile phone memory as well as on the USIM card.Memory info. (Menu 8.8.8) You can check the status of contacts memory in this menu.
Calls [Menu 9]Calls78All calls Menu 9.1 Allows you to view the missed, received, and dialled call records. You can make a call, or send a message to the number you have selected from the records. You can also save the number in Contacts.Dialled calls Menu 9.2 Allows you to view dialled call records, make a call, send a message, and save the number in Contacts.Received calls Menu 9.3 Allows you to view received call records, make a call, send a message, and save the number in Contacts.Missed calls Menu 9.4 Allows you to view missed call records, make a call, send a message, and save the number in Contacts.
USIM Tool KitUSIM Tool Kit [Menu ]79Depending on whether you have SAT support services or not (i.e. USIM Application Toolkit) on the USIM card, this menu (Menu ) may be different.If the USIM card supports SAT services, this menu will be the operator-specific service name stored on the USIM card, for instance “Special”. Please refer in that case to the information provided with your USIM card for further information on how to use the related options.If the USIM card does not support SAT services, this menu will be Alarms. For the Alarms menu feature, please refer to page 68.
Video call [Menu 0]Video call80You can make a video call using this menu. 1. Enter the number you want to dial. ] You can key in the number. ] You can select the number from Search contacts using the left soft key [Options]2. Press the centre key [Video call] to make a video call.During a video callWhen you are in a video call, the screen will show the contact's name and duration of call, contact's image, volume indicator, video control panel, and your image.You can access the following option menus by pressing the left soft key [Options]. ] Mute/Unmute ] Speaker (On /Off) ] Bluetooth/Handset talk (When the Bluetooth headset is connected) ] Hold/Resume ] Capture ] View sender number ] Go to contacts ] Go to messages ] Settings ] End callIncoming video callWhen a video call is received, the caller's information is displayed as following.] Picture/Animation: Displays picture ID, graphic image configured in Contacts, or default animation indicating the incoming call.] Caller's name and number: Shows incoming caller's number. If the number is stored in Contacts, displays the name of the contacts.Picture ID and animation setting is used in the order of Contacts, video file used in Group ringtone, and video file used in Profile.Also, sound can be set for the incoming video call. The sound setting is used in the order of Contacts, Group ringtone, and Profile.You can accept the incoming call by pressing the centre key [Accept]. Also you can accept the incoming call and show the private image by pressing the left soft key [Private].
Video call81The incoming call ringing can be silenced by pressing the right soft key [Silent]. It can be also silenced by long press on W on the left side of the phone.When ringing is silenced, press the right soft key [Reject] to reject the call.
Settings [Menu #]Settings82Profiles Menu #.1 You can select ringtone or vibration for an incoming call and configure the sound and volume of the ringtone, key tone, and sound effect, according to a profile. The profiles provided include [Normal], [Silent], [Vibrate only], [Outdoor], [Headset], [Customised 1], [Customised 2], and [Customised 3]. Select a profile, and press O to activate the profile. After pressing the left soft key [Options], select the Edit menu for the [Normal], [Outdoor], [Headset], [Customised 1], [Customised 2] and [Customised 3] profile to change the configuration. A different list of options is available for each profile that has been selected for editing.] Alert byThis option determines the incoming call notification mode. You can select from [Ring], [Vibration], [Silent], [Ring & vibration], [Ring after vibration], [Max Ring & Vibration].] Voice ringtoneYou can select the ringtone for incoming voice calls.] Video ringtoneYou can select the ringtone for incoming video calls.] VolumeSet the ringtone volume.] Message alertYou can set how often the phone is to inform you of a received message until it is read.] Message toneYou can select a file from among your own personal files or from the default files, to be played by the phone upon receiving a message.] Key toneYou can set the key tone to be played when pressing the keys.] Key tone volumeYou can set the volume of the chosen key tone, choosing from 7 available levels.
Settings83] Slide toneSelect the desired tone the phone will emit when you slide up/down the phone.] Confirmation toneYou can set the confirmation tone to be played by the phone to confirm actions.] Start up soundYou can set the effect to be played when the phone is switched on.] Select start up soundYou can select which file will be played when the phone is switched on.] Power off soundYou can set the effect to be played when the phone is switched off.] Select power off sound You can select which file will be played when the phone is switched off.Phone settings Menu #.2 Date & Time (Menu #.2.1) Although the current time is automatically configured when the phone is registered to the network, users can configure the time and date directly using this menu. The time configured by the user is valid only while the phone is turned on.Time1. Select the Time item from the Date & time list, and then press O.2. Move to your desired field, Hour, Minute, or am/pm field using the navigation keys. (When you have selected 12 hour as Time format)3. Enter Hour, and Minutes using the number keys.4. Select the time format using L / R.5. Scroll down to select the hour indicator format i.e. Off, Cuckoo clock or Chime bell.6. Press the centre soft key O to set the time with the specified value.
SettingsSettings84Date1. Select the Date item from the Date & time list, and then press O.2. Select the date format using L / R.3. Enter Day, Month and Year using the number keys.4. Press the centre soft key O to set the date with the specified value.Auto update date/timeWhen Auto Update is configured to On, the time and date are automatically updated according to the current time zone. If Confirm first is selected, the time and date update is confirmed before it is updated automatically.Daylight savingSelect whether to activate the daylight saving function or not. You can set the Summer time difference of selected home city for 1 hour or 2 hours.Language (Menu #.2.2) Select the display language. You can select Automatic language option to change display language to the USIM card supported language.Auto key lock (Menu #.2.3) If you activate this function, the keypad will be locked automatically after predefined delay time when the slide is closed.Touchpad vibration (Menu #.2.4) If you activate this function, the keypad will be vibrated when you press the key.Flight mode (Menu #.2.5) If you acivate the Flight mode, you can use the phone without connecting the 3G wireless network. 3G wireless phone and FM radio signals from the phone or Bluetooth connections are prevented, but you can still do tasks which do not require the use of wireless network. With flight mode you cannot make any calls including emergency calls or use other features that require network service.
Settings85Security (Menu #.2.6) PIN code requestWhen this is set to On, you are requested to enter your PIN each time you switch the phone on.Note] Press the right soft key in the PIN code entry window to return to the previous step.] 3 incorrect PIN code entries would invalidate the PIN code. And you have to enter the PUK (PIN Unblock Key) code to configure the PIN code again.] The maximum number of times you may enter the PUK code is 10. (Note: If you enter an incorrect PUK code 10 times, the USIM card will be blocked and must be replaced.)] If the PIN code request cannot be disabled by operator settings, you will not be able to choose this menu item.Handset lockYou can lock your phone. The following 4 lock functions are available.When switching on: Locks the handset whenever the handset is switched on.If USIM changed: Locks the handset when the phone's USIM card has been changed.Immediate: Locks the handset immediately.None: Deactivates the lock function.You are requested to enter the security code to confirm the selection.] To unlock the handset, you need to enter the security code.Change codesYou can change the PIN, PIN2, and the mobile phone password.PIN codePIN is the abbreviation for Personal Identification Number, and is used to restrict use by an unauthorised user.
SettingsSettings86PIN code change procedure1. Select ‘PIN code’ from the ‘Change codes' list and then press O.2. Enter the current PIN code, and press O.3. Enter the new PIN code, and press O.4. Enter the new PIN code once again, and press O.] If the PIN code is different from that of step 3, the procedure is restarted from step 3.5. When the PIN code is changed properly, a Changed message is displayed. If you enter an incorrect PIN code in step 2, the procedure is restarted from step 2, and the number of attempts you have left to enter the number decreased by 1.6. Press the right soft key in the PIN code entry window to return to the previous step.Note] Three incorrect PIN code entries in the PIN code entry window would invalidate the PIN code. In this case, you have to enter the PUK (PIN Unblock Key) code to configure the PIN code again. The maximum number of times you may enter the PUK code is 10. (Note: If you enter an incorrect PUK code10 times, the USIM card will be blocked and must be replaced.)PIN2 codePIN2 is the abbreviation for Personal Identification Number 2, and is used to restrict use by unauthorised users as with the PIN. The PIN2 code change procedure is the same as the one for the PIN code. 3 incorrect PIN2 code entries would invalidate the PIN2 code. In this case, you have to enter the PUK2 code in order to use the PIN2 code again. The maximum number of times you may try to enter the PUK2 code is 10, like PUK1. 10 incorrect PUK2 code entries would invalidate the PIN2 code.
Settings87Security codeThe security code is used to change the mobile phone password. The maximum number of attempts to enter the security code is not limited as it is with PIN and PIN2.Power save (Menu #.2.7)Decide whether to activate the power save mode or not. Memory manager (Menu #.2.8) Common memoryThis function shows the status of the user memory of the mobile phone. Since this function scans the overall file system for statistics, a few seconds are required.Reserved memoryThis function shows the status of the User reserved memory. The usual contents are Text msg, Contacts, Calendar, Tasks, Memo, Alarms, Call history, and Bookmarks. And it gives a clear illustration of the actual amount compared with the total amount for each item.USIM memoryThis function shows the status of the USIM card user memory.External memoryThis function shows the status of the External card user memory. This function displays the In-use and free memory usage statistics.Primary storage setting (Menu #.2.9) You can select the storage to download the file: Handset memory or External memory.Handset Information (Menu #.2.10) This functions shows the USIM card telephone number, model name and software version of the mobile phone.Reset settings (Menu #.2.11) Select this to reset your phone to its default configuration. You are requested to enter the security code.
SettingsSettings88Display settings Menu #.3 This menu allows you to personalise the display options of the screens and of the menus entire graphic interface.Main Display (Menu #.3.1)You can set the screen theme to be displayed on the main screen.Home screen] Wallpaper: You can select an image to be displayed on the main screen.] Homescreen items: You can select which items to display on the screen: Calendar + Clock, Calendar, Clock, Clock + Key guide, Dual clock, Key guide or Do not show.] Clock type: You can select the type of clock.] Clock font colour: You can select the colour of displaying the clock.Outgoing call pictureYou can select the image to be displayed while trying to call.Start up pictureYou can select the image to be displayed while the phone is being switched on.Power off pictureYou can select the image to be displayed while the phone is being switched off.Menu style (Menu #.3.2)You can select the desired menu style from Grid style and One by one style.Font (Menu #.3.3)You can set the font style, dialling font size, and dialling font colour using L / R.
Settings89Backlight (Menu #.3.4)You can set the backlight duration and the brightness on the Home screen and the duration on the Keypad individually.Welcome message (Menu #.3.5)After selecting On, you can write a welcome message.Call settings Menu #.4 Call durations (Menu #.4.1) You can view call time by types. Press the left soft key [Options] to choose either partial initialisation or entire initialisation. Initialization will require your Security code.The following timers are available:] All calls: Shows total call time.] Received calls: Shows incoming call time.] Dialled calls: Shows outgoing call time.] Last call: Shows the latest call time in units of hours/minutes/seconds.Call barring (Menu #.4.2) Call barring menus for Voice and Video calls are provided.The menu consists of Voice calls, Video calls and Deactivate all. The Voice calls and Video calls menus have the following submenus.The Call barring menu consists of All outgoing, Outgoing international, Outgoing international calls except home country, All incoming and Incoming when abroad submenus. The All outgoing menu bars dialling all outgoing calls, the Outgoing international menu bars dialling outgoing international calls, and the Outgoing international calls except home country menu bars dialling outgoing international calls except for the Home PLMN country. All incoming rejects all incoming calls and the Incoming when abroad menu rejects incoming calls when roaming.
SettingsSettings90Voice callsVideo callsAll outgoing1. When O is selected, it receives the Barring password from user, and activates the barring service on the network. A requesting message and animation appears. When the network answers, the result of the operation is displayed.2. When the Options menu is selected, it activates the Outgoing calls menu. Select the Options menu from the soft menus on the lowest menu. Then Deactivate, Deactivate all, View status and Change password menus appear. The Deactivate menu deactivates the barring service after the user's Barring password is entered. The Deactivate all menu deactivates all barring services configured in the network after the user's Barring password has been entered. The View status menu enables users to view the current network configuration. Selecting View status menu displays the Requesting message with animation and the result of the operation when the network answers. Change password menu enables users to change the current barring password.Outgoing international1. When O is selected, it operates in the same way as the Outgoing calls menu.2. When the Options menu is selected, it activates and operates the International calls menu. It operates in the same way as the Outgoing calls menu.Outgoing international calls except home country1. When O is selected, it operates in the same way as the Outgoing calls menu.2. When the Options menu is selected – It activates and operates the International except home country menu. It operates in the same way as the Outgoing calls menu.
Settings91All incoming1. When O is selected, it operates in the same way as the Outgoing calls menu.2. When the Options menu is selected, it activates and operates the Incoming calls menu. It operates in the same way as the Outgoing calls menu.Incoming when abroad1. When O is selected, it operates in the same way as the Outgoing calls menu.2. When the Options menu is selected, it activates and operates the Incoming calls when abroad menu. It operates in the same way as the Outgoing calls menu.Fixed dial numbers (Menu #.4.3) ] On/Off- On: Select whether to activate FDN or not. PIN authentication is required.- OFF: Select whether to activate FDN or not. PIN authentication is required.] FDN list: Displays the current FDN list. You can edit, add, or delete fixed dial numbers. PIN2 authentication is requried to edit,add, or delete the list. And the configuration information is saved on the USIM. The information saved on the USIM is used when FDN restricts outgoing calls.Data volume (Menu #.4.4) Allows you to check the sent, received and all data volume transferred.Press the left soft key [Clear all] to choose entire initialization. You can also use the [Clear] for the initialization of the selected volume type. Initialization will require your Security code.Call costs (Menu #.4.5) 1. This function displays the call costs of the Last call and All calls.2. To initialise, press the centre key [Clear] and enter the PIN2 code.
SettingsSettings923. You can select either Units or Currency in Set call cost. According to your setting, the call cost is displayed during a call (If USIM and Network support Advice Of Charge(AOC)).4. In the Set limit configuration, select On to configure the cost limit. When a cost limit is configured, and the call costs reach the limit, making a call will not be allowed.Diverts (Menu #.4.6) Call divert menus for voice and video calls are provided.If you press O, you can activate call divert menu.Voice callsAll voice callsWhen busyNo answerNot reachable1. When the number list is not exsisted Converts to an editor for entering a divert number. You can input the number to divert a call directly or search it in phonebook. If you press O [Divert], the phone will send the request to service provider after entering the number. While waiting for the result from the network, a Requesting message and animation appears.2. When the number list is exsistedDisplays To other number menu including of the number list. While waiting for the result from the network, a Requesting message and animation appears.3. Option menuAfter activating All voice calls menu, selecting the Options menu at the bottom of the menus displays the Deactivate, Deactivate all, View status and clear list menus.The View status menu shows the settings on the network. If you select this menu, Requesting. message and animation appear. Then the network settings are displayed
Settings93when the information is received from the network. If you select the Deactivate menu, the call divert numbers registered in the network are deleted after user confirmation. Clear list menu will delete all divert number list.Video callsAll video calls1. When the number list is not exsisted Converts to an editor for entering a divert number. You can input the number to divert a call directly or search it in phonebook. If you press O [Divert], the phone will send the request to service provider after entering the number. While waiting for the result from the network, a Requesting message and animation appears.2. When the number list is exsistedDisplays To other number menu including of the number list. While waiting for the result from the network, a Requesting message and animation appears.3. Option menuAfter activating the All video calls menu, selecting the Options menu at the bottom of the menus displays the Deactivate, Deactivate all, View status and clear list menus.If you select the Deactivate menu, the call divert numbers registered in the network are deleted after user confirmation. Selecting the Cancel all menu will display the operation result after showing the Requesting message and animation. Clear list menu will delete all divert number list.When busy1. When the number list is not exsistedIt operates the same as All voice calls menu.2. When the number list is exsistedIt operates the same as All voice calls menu.3. When Option menu is selectedIt activates and operates If busy menu. It operates the same as All voice calls menu.
SettingsSettings94No answer1. When the number list is not exsistedIt operates the same as All voice calls menu.2. When To a number is selectedIt operates the same as All voice calls menu.3. When Option menu is selectedActivates and operates No answer menu. It operates the same as All voice calls menu except that users can configure delay time in the Set waiting time menu in the menu list.Not reachable1. When the number list is not exsistedIt operates the same as All voice calls menu.2. When the number list is exsistedIt operates the same as All voice calls menu.3. When Options menu is selectedActivates and operates If out of reach menu. It operates the same as All voice calls menu.Call waiting (Menu #.4.7) ] Activate: Activates waiting service. Selecting this item, displays requesting message and animation. When the network answers, the result of the operation is displayed.] Deactivate: Deactivates Call waiting service. Selecting this item displays requesting message and animation. When the network answers, the result of the operation is displayed.] View status: Displays activated Call waiting service group item of the network. Selecting this item displays requesting message and animation. When the network answers, the result of the operation is displayed.Voicemail (Menu #.4.8) You can add or modify voice mail centre.
Settings95Video call (Menu #.4.9)You can set the screen display when making /receiving a video call.] Use private image: Determine whether to show the private image or not.] Select private image: Select the still image to be displayed.] Mirror: Select to activate the mirror effect or not.- On: Displays the image flipped side to side.- Off: Displays the image as it is.] My image size: Select my image size to be displayed.] My image position: Select the position where your image will be displayed.Common settings (Menu #.4.0)Call rejectYou can set whether to reject incoming calls.1. Select On in Reject menu to activate call reject. The Reject list menu appears.2. Set the desired call reject option in the Reject list menu.] All calls: Rejects all calls.] Contacts: Rejects the calls from the number stored in Contacts.] Groups: You can specify call rejects by group units stored in Contacts.] Unregistered: Rejects calls from the number not stored in Contacts.] No caller ID: Reject calls which do not have CLI information.
SettingsSettings96Send my number] Set by network: Configures with the default settings determined by the service provider.] On: Configures to send my phone number when making an outgoing call.] Off: Configures not to send my phone number when making an outgoing call.Auto redialAllows you to set the auto redial function when a call attempt has failed.Answer modeAllows you to set the answering method. You can choose between Press send key, Slide up and Press any key.Minute minderDetermines whether to sound a 1 minute tone every 1 minute when you are on the phone.BT answer mode] Hands-free: You can answer a call using the Bluetooth headset, when the Bluetooth is connected.] Handset: If you press S on the handset to answer a call, you can talk on the handset. If you press the Bluetooth headset key to answer a call, you can talk using the Bluetooth headset.This is the initial answer mode selection. And while talking, you can switch from handset to headset or from headset to handset.Save new numberIn this menu, you can save the phone number when ending a call if the phone number is not saved in a phonebook.Slide close setting when the slide is down, you can set the call is ended or not.Messaging settings Menu #.5 For detailed information, please refer to page 51.
Settings97Contact settings Menu #.6 For detailed information, please refer to 72. (Menu 8.7)Connectivity Menu #.7 Bluetooth (Menu #.7.1) Bluetooth QD ID B012668Bluetooth connectionYour phone has built-in Bluetooth wireless technology which makes it possible for you to connect your phone wirelessly to other Bluetooth devices such as a handsfree, PC, PDA or other phones.You can, for example, have a conversation via a cordless Bluetooth handsfree or browse the Internet, wirelessly connected via a mobile phone. You can also exchange, for example, business cards, calendar items and pictures.Note] We recommend that your phone and the Bluetooth device you are communicating with be within a range of 10 meters. The connection may be improved if there are no solid objects between your phone and the other Bluetooth device.1. Getting started• Menu > #. Settings > 7. Connectivity > 1. Bluetooth > 1. Turn on/offTo use the Bluetooth function, you must first set Turn on.2. Configuring Bluetooth settings• Menu > #. Settings > 7. Connectivity > 1. Bluetooth > 4. Settings- My visibility: Set [My handset’s visibility] to [Show to all] so that other devices can detect your phone when they are searching for a Bluetooth device. If you select [Hidden], other devices will not be able to detect your phone when they are searching for a Bluetooth device.
Settings Settings98- My name: You can name or rename your phone as it will appear on other devices. Your phone's name will be shown on other devices only when [My handset’s visibility] is set to [Show to all].- Supported services: You can view the list of devices sich as hedsets and handsfree kits supported by this Bluetooth enabled phone.- My address: You can check the address of Bluetooth.Note] When user uses Bluetooth Device in the handset, the security of the handset is at risk.Therefore, we recommend that Bluetooth visibility be set to Hidden after configuration or device pairing.For incoming files via Bluetooth regardless of paired devices, you can choose to accept or reject the connection, after checking the sender details. 3. Search and pair new device<Searching new device>You can search new device as following menu.• Menu > #. Settings > 7. Connectivity > 1. Bluetooth > 2. Search new devices<Pairing devices>1. To search for a Bluetooth device to pair, press Add new device.2. Screen shows Searching for devices. Bluetooth devices within a range of 10m will be found.3. If Bluetooth devices are found, these devices are listed on the screen. If no Bluetooth device is found, you will be asked if you want to search again.4. Pairing procedure- Press O. A window will appear on the screen asking you to enter your password.- After creating a password (of 1 to 16 digits), the user of the other device must enter the password for pairing.The user of the other device must know the password in advance for authentication.
Settings99] KT520 supports follow Bluetooth services- Headset profile- Hands-free profile- Object push profile- File transfer profile- Dial-up networking profile- Advanced audio profile- Audio video remote control profile(audio only)Option] Add new device: Using this menu, you can pair a new Bluetooth device with your phone.] Connect1. If you want to open the connection to the selected device, select the Connect.2. If you want to close the connection to the selected device, select the Disconnect.] Delete: Using this menu, you can delete the paired Bluetooth device.] Delete all: Using this menu, you can delete all of the paired Bluetooth devices.<Pairing devices>1. To search for a Bluetooth device to pair, press Add new device .2. Screen shows Searching for devices.Bluetooth devices within a range of 10m will be found.3. If Bluetooth devices are found, these devices are listed on the screen. If no Bluetooth device is found, you will be asked if you want to search again.Option] Add new device: Using this menu, you can pair a new Bluetooth device with your phone.] Connect: If you want to open the connection to the selected device, select the Connect.4. Pairing procedure- Press O. A window will appear on the screen asking you to enter your password.
SettingsSettings100- After creating a password (of 1 to 16 digits), the user of the other device must enter the password for pairing. The user of the other device must know the password in advance for authentication.<Deleting devices>1. Select a device to delete from the Paired devices screen.2. You can delete a device by pressing the Delete key or by selecting Options > Delete. To delete all paired devices, select Options > Delete All.<Transmitting data using Bluetooth>1. To transmit data from your phone to another Bluetooth device, first select the application where the target data is saved. For example, to send data in the My Files to another device, select Menu > 6. My Files > 1. Pictures / 2. Sounds / 3. Videos/ 5. Bluetooth data / 6. Other files / 7. External memory > Select data to transmit > Send > 3. Bluetooth2. Transmitting data1) Paired device found is displayed. If the desired device does not exist in the list, select [Refresh].2) Select the device to which you want to transmit data from the devices on the screen and press O.3) If the other party selects [Yes] for [Connection request], the data is transmitted.Synchronisation (Menu #.7.2)(Note: This service is not available in all countries. Please contact your service provider for further information.)If Sync service is supported by your network operator, this service function synchronizes the data in a phone and the data on a server such as Contacts, Calendar, Tasks, and Memo via a wireless network.
Settings101Connect1. Select the Connect item and then press O.2. Connect to the server with the selected server profile and the synchronization animation is displayed while the synchronization is performed.LogsSelect the Logs item and then press O to view the log for the last synchronization operation performed.Server synch. centre1. Select the Server synch. centre item and then press O.2. This menu allows you to configure the profile for a synchronization server.] Profile name: Input the name for the profile.] Host address: Contact your service provider.] SyncML proxy: Contact your service provider.] User name: Enter your user ID for synchronization server.] Password: Input your password.] Contacts: Select whether to synchronise Contacts or not.] Contact name: Input the contacts database name for server access.] Calendar: Select whether to synchronise Calendar or not.] Calendar name: Input the calendar database name for server access.] Tasks: Select whether to synchronise Tasks or not.] Tasks name: Input the Tasks database name for server access.] Memo: Select whether to synchronise Memo or not.] Memo name: Input the Memo database name for server access.] Sync type: Select the synchronization type below.
SettingsSettings102- NormalThe phone and the server are required to exchange information about the modified data.- BackupThe phone sends all the data from a database to the server. The server is expected to replace all data in the target database with the data sent by the phone. This means the phone overwrites all the data in the server database.- RestoreThe server sends all its data from a database to the phone. The phone is expected to replace all data in the target database with the server sent by the server. This means the server overwrites all data in the phone database.] Access point: Select an access point to use for the data connection.] Sync mode: Select the synchronization mode below.- ManualThe synchronisation will only occur when explicitly initiated by the user.- AutomaticThe application will automatically initiate a sync, based on the preferences defined (either a regular reminder or after changes have been made.)- Sync frequencySelect the automaic sync preference when you choose automatic sync mode.USB connection mode (Menu #.7.3)You can activate USB connecton mode of your phone for serveral usages.If you use Mass storage function like USB memory card, select Mass storage in this menu. Mass storage is available for only external memory card. If you use Data service such as PC suite application, select Data service in this menu.
Settings103If you use Music sync with Windows Media Player, select Music sync in this menu. Music sync is available for only music contents. If you want to synchronise with external memory, you can use 'External memory' as Primary storage. If you want to synchronise with internal memory, you can use 'Internal memory' as Primary storage.Network (Menu #.7.4)Select NetworkSelect between Automatic and Manual.] Automatic: Automatically searches for the network and registers the handset to the network. This is recommended for best service and quality.] Manual: All the currently 2G(GSM) and 3G(UMTS) available networks are shown and you can select one of them for registration. If the registration of the network has failed, the network lists are listed again and you can select any other one for registration.NoteWhen your handset lose the network inmanual mode, the popup message to selectthe available network will be shown in the Idle screen.Network modeYou can set a type of network to search for when networks are searched in the Select network menu. ] Automatic: Searches all the networks connectable.] UMTS: Searches only networks supporting 3G. (Except for Swiss)] GSM 900/1800: Searches only networks supporting GSM 900/1800 band.] GSM 1900: Searches only networks supporting GSM 1900 band.
SettingsSettings104Preferred listsIf the network is searching automatically, you can add a preferable network to be connected to. And the following options are available.] Add new: You can add a new network using the followings.- Search: You can select one from the network list stored in the phone.- Enter new network: You can enter the country code (MCC), the network code (MNC) and RAT to add.] Delete: Deletes the selected network.] Edit: You can modify the information of the selected network.] Move up: Moves the selected network upward.] Move down: Moves the selected network downward.Access points (Menu #.7.5)This menu shows the access point list. You can create new profiles, delete or edit them by using the Option Menu. However, you cannot delete or edit default configurations depending on country variant.You can edit the following configuration tiems by pressing the left soft key [Option] and Edit.Connection title Access Point profi le name.Bearer Choose the bearer from the list.(Default is UMTS.)Authentication Choose the authentication from the list. (Default is No auth)User name Information provided by service provider.Password Information provided by service provider.APN APN name to access network. Information provided by service provider.] Press confirm key to save any configuration changes.
Settings105Browser settings (Menu #.7.6) ProfilesSelect the appropriate profile by pressing O. This will activate the profile to initiate browser launch.Character encodingSets the browser default character set to one of the following.] Automatic, English(ASCII), English(ISO), English(LATIN), Unicode(UCS2 BE), Unicode(UCS2 LE), Unicode(UCS2 Auto), Unicode(UTF-16 BE), Unicode(UTF-16 LE), Unicode(UTF-16 Auto), Unicode(UTF-8).Scrolling controlAllows you to set the scroll speed by selecting the number of lines to scroll. Select one from 1 line, 2 lines, 3 lines. Show Image Allows you to enable or disable image display during browsing.CacheEnabling Cache allows you to store accessed pages to your phone. Once a page has been stored in cache it will greatly enhance the page loading speed on subsequent browsing of the same page.Cookie Enabling Cookie allows you to store cookies sent from the server. Disabling this function will prevent cookies from being stored on your phone.JavaScriptSelect whether to switch JavaScript On or Off.Reset settingSelect this to reset your phone to its default configuration.SecurityIf user presses Certificates, certification information is shown.User can clear secure session information by pressing Session clear.
SettingsSettings106CertificatesIf stored, a list of root/ca certificates required for WTLS/TLS can be found here. Certificates can be viewed from the list.Session clearSecure (WTLS/ TLS) session data can be cleared using this option. Session data should be cleared to establish a new secure session.Streaming settings (Menu #.7.7) If you want to set different network setting to play streaming content, you can set different network settings.Java settings Menu #.8 Activating a profile1. Move the cursor to the profile you would like to activate.2. Press O.Adding a new profile 1. Select Add new from the Options menu. The following items need to be configured.Service name Enter an account name for the profi le.Connection mode Choose from the given list of connection modes. (Default is TCP with Proxy or TCP without Proxy)IP address Enter the WAP Gateway IP address provided by the operator. (e.g. 195. 115. 025. 129)Proxy server port Port details are provided by the operator, depending upon the Connection mode.Access point Choose from the given list of access points. (For more details on adding or editing a new access point, refer to page 98.)2. Press the O [Save] to save any configuration changes.You can edit and delete a profile by selecting Edit and Delete from the Options menu.
AccessoriesAccessories107There are various accessories for your mobile phone. You can select these options according to your personal communication requirements.Travel Adapter This charger allows you to charge the battery while away from home or your office.Standard Battery Data cable/CD You can connect your phone to PC to exchange the data between them. Hands free ear-microphone and music player controller combo Stereo headsetController: Answer & End key, music player control, volume control, Hold button and microphone.After connecting the headset and the controller, plug the end of controller into the headset jack on the right side of the phone.Note] Always use genuine LG accessories.] Failure to do so may invalidate your warranty.] Accessories may vary in different regions: please check with our regional service company or agent for further information.
Technical dataTechnical data108 General Product name: KT520 System: GSM900/DCS1800/PCS 1900, WCDMA 2100Net weight: 67.5g (Without battery)Ambient TemperaturesMax: +55°C (Normal) / +45°C (Charging)Min: -10°C
IndexIndex109AAccess codes 23Access points 98Add memo 66Add new 71Alarms 63Answer mode 92BBacklight 83Barring password 25Battery 15, 101Battery information and care 11Bluetooth 93Bluetooth data 61Browser settings 35, 99CCalculator 66Calendar 63Call barring 85Camera 38Charging the battery 19Converter 67DData cable 101Dialled calls 73Display information 24Display settings 83Diverts 88EEmail 46, 49, 54Entering text 28External memory 62, 82
IndexIndex110HHandset Information 82Handset lock 80IInbox 47JJavaScript 36, 100Java settings 33, 84KKey tone 77LLanguage 79MMemo 66Memory card formatting 22Memory status 81Message alert 77Message tone 77Missed calls 73MMS 52Multimedia templates 51Music hot key 14NNetwork 97Network selection 97OOwn number 72PPIN code 23PIN code request 79PIN2 code 23, 81Playlists 37Profiles 35, 99PUK code 23PUK2 code 23
Index111RReceived calls 73SSAR 7Screen structure 24, 25Security 35, 79, 99Security code 23, 81Signal Strength 28Speed dials 71Stereo headset 101TTasks 65Templates 51UUSIM memory 82USIM Tool Kit 74VVideos 59Voice calls 88Voice mail 91Voice recorder 69Volume 68, 77WWorld time 69

Navigation menu