LG Electronics USA KU990 PCS GSM/ EDGE Phone with Bluetooth User Manual U990 ENG 070607
LG Electronics USA PCS GSM/ EDGE Phone with Bluetooth U990 ENG 070607
Users Manual
U990 USER GUIDE
This document is the user guide for the LG U990 3G Video
Mobile Phone.
All rights for this document are reserved by LG Electronics.
Copying, modifying and distributing this document without the
consent of LG Electronics are prohibited.
ENGLISH
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void
the user's authority to operate the equipment. "
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. if this
equipment does cause harmful interference or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be
free from defects in material and workmanship, according to the following terms and conditions:
(1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase
of the product.
(2) The limited warranty extends on to the original purchaser of the product and is not assignable or
transferable to any subsequent purchaser/end user.
(3) This warranty is good only to the original purchaser of the product during the warranty period as
long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada.
(4) The external housing and cosmetic parts shall not be covered under these limited warranty terms.
(5) Upon request from LG, the consumer must provide information to reasonably prove the date of
purchase.
(6) The customer shall bear the cost of shipping the product to the Customer Service Department of
LG. LG shall bear the cost of shipping the product back to the consumer after the completion of
service under this limited warranty.
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the product in other than its normal and customary
manner.
(2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to
moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair,
misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the
fault of LG, including damage caused by shipping blown fuses spills of food or liquid.
(3) Breakage or damage to antennas unless caused directly by defects in material or workmanship.
(4) That the Customer Service Department at LG was net notified by consumer of the alleged defect
or malfunction of the product during the applicable limited warranty period.
(5) Products which have had the serial number removed or made illegible.
(6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by
operations law, statutory or otherwise, including, but limited to any implied warranty of
marketability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved accessories.
(8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to
normal customer use.
(9) Products operated outside published maximum ratings.
3
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
3. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL
NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS
OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF,
OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY
APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental
or consequential damages or limitations on how long an implied warranty lasts; so these limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following web address:
www.lgeservice.com
8
For Your Safety
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information
carefully for optimal performance and to prevent any damage
to or misuse of the phone. Any changes or modifications not
expressly approved in this user guide could void your warranty
for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the
bathroom, swimming pool, etc.
Always store your phone away from heat. Never store your
phone in settings that may expose it to temperatures less than
32°F or greater than 104°F, such as outside during extreme
weather conditions or in your car on a hot day. Exposure to
excessive cold or heat will result in malfunction, damage
and/or catastrophic failure.
Be careful when using your phone near other electronic
devices. RF emissions from your mobile phone may affect
nearby in adequately shielded electronic equipment. You
should consult with manufacturers of any personal medical
devices such as pacemakers and hearing aides to determine if
they are susceptible to interference from your mobile phone.
Turn off your phone in a medical facility or at a gas station.
Never place your phone in a microwave oven as this will
cause the battery to explode.
IMPORTANT! Please read the TIA SAFETY INFORMATION on
page 78 before using your phone.
Safety Information
Read these simple guidelines. Breaking the rules may be
dangerous or illegal. Further detailed information is given in this
user guide.
]Never use an unapproved battery since this could damage
the phone and/or battery and could cause the battery to
explode.
]Never place your phone in a microwave oven as it will
cause the battery to explode.
]Do not dispose of your battery by fire or with hazardous or
flammable materials.
]Make sure that no sharp-edged items come into contact
with the battery. There is a risk of this causing a fire.
]Store the battery in a place out of reach of children.
]Be careful that children do not swallow any parts such as
rubber plugs (earphone, connection parts of the phone,
etc.). This could cause asphyxiation or suffocation.
9
For Your Safety
]Unplug the power cord and charger during lightning storms
to avoid electric shock or fire.
]When riding in a car, do not leave your phone or set up the
hands-free kit near to the air bag. If wireless equipment is
improperly installed and the air bag is activated, you may be
seriously injured.
]Do not use a hand-held phone while driving.
]Do not use the phone in areas where its use is prohibited.
(For example: aircraft).
]Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as a
bathroom.
]Never store your phone in temperatures less than- 4°F or
greater than 122°F.
]Do not use harsh chemicals (such as alcohol, benzene,
thinners, etc.) or detergents to clean your phone. There is a
risk of this causing a fire.
]Do not drop, strike, or shake your phone severely. Such
actions may harm the internal circuit boards of the phone.
]Do not use your phone in high explosive areas as the phone
may generate sparks.
]Do not damage the power cord by bending, twisting, pulling,
or heating. Do not use the plug if it is loose as it may cause
a fire or electric shock.
]Do not place any heavy items on the power cord. Do not
allow the power cord to be crimped as it may cause fire or
electric shock.
]Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock or seriously
damage your phone.
]Do not disassemble the phone.
]Do not place or answer calls while charging the phone as it
may short-circuit the phone and/or cause electric shock or
fire.
]Only use the batteries, antennas, and chargers provided by
LG. The warranty will not be applied to products provided by
other suppliers.
]Only authorized personnel should service the phone and its
accessories. Faulty installation or service may result in
accidents and consequently invalidate the warranty.
]Do not hold or let the antenna come in contact with your
body during a call.
]An emergency call can be made only within a service area.
For an emergency call, make sure that you are within a
service area and that the phone is turned on.
10
For Your Safety
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications (FCC) of he United
States, with its action in Report and Order FCC 96-326, adopted
an updated safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are consistent with
the safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
CAUTION
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or result in
violation of FCC regulations. Do not use the phone with a
damaged antenna. If a damaged antenna comes into contact
with skin, a minor burn may result. Contact your local dealer
for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with
the back of the phone kept 0.79 inches (2cm) between the
user’s body and the back of the phone. To comply with FCC RF
exposure requirements, a minimum separation distance of 0.79
inches(2cm) must be maintained between the user's body
and the back of the phone. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not
be used. Body-worn accessories that cannot maintain 0.79
inches(2cm) separation distance between the user's body
and the back of the phone, and have not been tested for typical
body-worn operations may not comply with FCC RF exposure
limits and should be avoided.
11
For Your Safety
Vehicle Mounted External Antenna
(optional, if available)
A minimum separation distance of 8 inches (20cm) must be
maintained between the user/bystander and the vehicle
mounted external antenna to satisfy FCC RF exposure
requirements. For more information about RF exposure, visit
the FCC website at www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions:
(1) This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must
accept any interference received, including interference that
may cause undesired operation.
Cautions for Battery
]Do not disassemble.
]Do not short-circuit.
]Do not expose to high temperature: 60°C (140°F).]
]Do not incinerate.
Battery Disposal
]Please dispose of your battery properly or bring to your
local wireless carrier for recycling.
]Do not dispose in fire or with hazardous or flammable
materials.
Adapter (Charger) Cautions
]Using the wrong battery charger could damage your phone
and void your warranty.
]The adapter or battery charger is intended for indoor use
only.
Do not expose the adapter or battery charger to direct sunlight
or use it in places with high humidity, such as the bathroom.
General Functions
24
General Functions
Making and answering calls
Making a voice call
1. Enter the number including the full area code.
]
To delete a digit press .
To delete all digits press and hold .
2. Press to make the call.
3. Press to finish the call, or close the handset.
Making a call from the call logs
1.
In standby mode, press and the latest
incoming, outgoing and missed phone numbers will
be displayed.
2. Select the desired number by moving the joystick
to the up/down.
3. Press to call the number.
Making a video call
You can make a video call in a 3G covered service area.
If the called user has a 3G video phone in a 3G
covered service area, the call will be established. You
can also answer a video call for video incoming call. To
make/answer a video call, do the following.
1. Input the phone number using the keypad, or select
the phone number from the calls made/received
lists.
]
To correct mistakes, press briefly to
delete the last number, or press and hold
to delete all numbers.
2. If you do not want to use the speakerphone, ensure
you have the headset plugged in.
3. To start the video function, press the left soft key
[Options] and select
Make video call
.
]
You will be notified that you will need to close
other applications to make the video call.
25
4. Adjust the camera position if necessary.
5. Press to finish the call, or close the handset.
Making a voice/video call from
Contacts
It is easy to call anyone whose number you have stored
in your Contacts.
1. Move the joystick to the down to access the
contacts list.
2. Scroll to the contact to make a call.
3. Press to make a voice call. Press the left soft
key and select
Make video call
to make a video
call.
4. Press to finish the call.
Making international calls
1. Press and hold for the international prefix.
The ‘+’ character prefixes the international access
code.
2. Enter the country code, area code, and the phone
number.
3. Press .
Adjusting the volume
During a call, if you want to adjust the earpiece
volume, use on the left side of the phone. In idle
mode, you can adjust the key volume using .
Answering a call
When you receive a call, the phone rings and the
flashing phone icon appears on the screen. If the caller
can be identified, the caller’s phone number (or name if
stored in your Contacts) is displayed.
General Functions
Note
]The video call may take some time to connect.
Please be patient. The connection time will also
depend on how quickly the other party answers
the call. While the video call is connecting, you
will see your own image; after the other party
has answered, their image will be displayed on
the screen.
General Functions
26
General Functions
1.
Press
the send key to answer an incoming call.
2. End the call by pressing .
Shortcut to activate vibrate
mode
You can activate the vibrate only mode by pressing
and holding down after opening the phone.
Signal strength
You can check the strength of your signal by the
signal indicator ( ) on the LCD screen of your
phone. Signal strength can vary, particularly inside
buildings. Moving close to a window may improve
reception.
L'indicatore segnala anche se il telefono è collegato a
una determinata tipologia di rete:
]: rete 2G
]: rete 3G
]: rete GPRS
]: rete EDGE
Note
]To reject an incoming call, press or the
right soft key twice.
]If the answer mode is set to Press any key, any
key will answer a call except for .
Note
]You can answer a call while using the Contacts
or other menu features.
]When the compatible headset is connected, you
can also answer a call using the headset key, as
well as using the phone. To reject an incoming
call, press .
]You can mute the ringtone when a call comes in
by pressing and holding the volume down side
key.
27
General Functions
Entering text
You can enter alphanumeric characters using the
keypad.
For example, storing names in Contacts, writing a
message, creating a personal greeting or scheduling
events in the calendar all require entering text.
The following text input methods are available with
the handset.
Changing the text input mode
1. When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator in the upper right corner of the LCD
screen.
2. Press to cycle between T9Abc, T9abc, Abc,
abc and 123.
Using the T9 Mode
The T9 predictive text input mode allows you to enter
words easily with a minimum number of key presses. As
you press each key, the handset begins to display the
characters that it thinks you are typing based on a
built-in dictionary. As new letters are added, the word
changes to reflect the most likely candidate from the
dictionary.
T9 mode
This mode lets you enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter. The T9 mode automatically
compares your keystrokes with an internal
dictionary to determine the correct word, thus
requiring far fewer keystrokes than the traditional
ABC mode. This is sometimes known as predictive
text.
ABC mode
This mode lets you enter letters by pressing the
key labelled with the required letter once, twice,
three or four times until the letter is displayed.
123 mode (Number mode)
Type numbers using one keystroke per number. To
change to 123 mode in a text entry field, press
until 123 mode is displayed.
1. When you are in the T9 predictive text input mode,
start entering a word by pressing to .
Press one key per letter.
]The word changes as letters are typed. Ignore
what’s on the screen until the word is typed
completely.
]If the word is still incorrect after typing
completely, press once or more to scroll
through the other word options.
Example
Press to type
Good
.
Press to get
Home
.
]If the desired word is missing from the word
choices list, add it by using the ABC mode.
2. Enter the whole word before editing or deleting any
keystrokes.
3. Complete each word with a space by pressing
.
To delete letters, press . Press and hold down
to erase entire words.
Using the ABC Mode
Use to to enter your text.
1. Press the key labelled with the required letter:
]Once for the first letter.
]Twice for the second letter.
]And so on.
2. To insert a space, press once. To delete
letters, press . Press and hold down
to clear the display.
Refer to the following table for more information on
the characters available using the alphanumeric keys.
General Functions
28
General Functions
29
General Functions
Using the 123 (Number) mode
The 123 mode enables you to enter numbers in a
message(a telephone number, for example). Press the
keys corresponding to the required digits before
manually switching back to the appropriate text entry
mode.
Using the symbol mode
The symbol mode enables you to enter various
symbols or special characters. To enter a symbol, select
Options
>
Insert
>
Symbol
. Use the navigation and
numeric keys to select the desired symbol and press
.
Key Upper Case Lower Case
. , / @ ? ! - : ' " 1 . , / @ ? ! - : ' " 1
AB C 2 Ä À Á Â Ã Å Æ Ç a b c 2 ä à á â ã å æ ç
D E F 3 Ë È É Ê d e f 3 ë è é ê
G H I 4 Ï Ì Í Î ˝g h i 4 ï ì í î ©
J K L 5 j k l 5
M N O 6 Ñ Ö Ø Ò Ó Ô Õ Œ m n o 6 ñ ö ø ò ó ô õ œ
P Q R S 7 ß Íp q r s 7 ß ß
T U V 8 Ü Ù Ú Û t u v 8 ü ù ú û
W X Y Z 9 w x y z 9
Space 0 Space 0
Characters in the order display
Note
]The characters assigned to the keys and their order
of appearance depends on the language selected
using the option Input method. The table above
provides the characters set for English language.
30
Overview of Menu Functions
Overview of Menu Functions
1. DVBH
1.1 TV
1.2 Settings
1.3 Trouble Shooting
2. Profiles
3. Settings
3.1 Screen
3.2 Date & time
3.3 Auto key lock
3.4 Network
3.5 Flight mode
3.6 Access points
3.7 Security
3.8 Power save mode
3.9 Language
3.0 Memory status
3.* Handset information
3.# Reset settings
4. Vodafone live!
4.1 Vodafone live!
4.2 Bookmarks
4.3 Saved pages
4.4 Go to URL
4.5 Security
4.6 Browser settings
4.7 Streaming settings
5. Messages
5.1 Create new message
5.2 Inbox
5.3 Mailbox
5.4 Drafts
5.5 Outbox
5.6 Sent items
5.7 Templates
5.8 Emoticons
5.9 Settings
6. My stuff
6.1 My images
6.2 My videos
6.3 My sounds
6.4 Games & Applications
6.5 My bluetooth files
6.6 Others
6.7 My memory card
6.8 Play lists
7. Multimedia
7.1 Video camera
7.2 Camera
7.3 Voice recorder
31
Overview of Menu Functions
8. Contacts
8.1 Add new
8.2 Search
8.3 Speed dials
8.4 Groups
8.5 Service dial numbers
8.6 Own number
8.7 Settings
9. Application
9.1 Games & Applications
9.2 Settings
0. Tools
0.1 Quick menu
0.2 Alarm clock
0.3 Connectivity
0.4 Calculator
0.5 World time
0.6 Unit converter
*. Organiser
*.1 Calendar
*.2 To do
*.3 Memo
*.4 Secret memo
*.5 Date finder
*.6 Dateulator
*.7 Settings
#. Calling
#.1 Video calls
#.2 Call history
#.3 Call duration
#.4 Call costs
#.5 Call divert
#.6 Call barring
#.7 Fixed dial numbers
#.8 Call waiting
#.9 Settings
DVBH [Menu 1]
32
DVBH
TV Menu 1.1
You can watch TV by selecting this menu. Or, you can
access TV by pressing in idle mode.
Key operations while watching TV
Contact your service provider further information.
Settings Menu 1.2
Watch time (Menu 1.2.1)
You can check the total TV watching time.
Information view mode (Menu 1.2.2)
You can select whether the indicator area and information
area will be displayed while watching TV or not.
Trouble Shooting Menu 1.3
If you are having problems as following, follow these
steps.
]“no available channel” message is shown, when you
try to navigate the TV Guide.
1. Select "Option" menu.
2. Select “8. Update TV Guide” menu.
3. Please wait for a while.
4. After the progress popup window is disappeared, a
new ESG TV guide shall be displayed.
5. Select a service on the TV Guide.
Joystick to the up
Joystick to the
down/TV guide
hot key
Joystick to the
left/right
Joystick key
Up/down side
keys
/
Number keys
Displays the current programs list.
Displays the TV guide.
Moves to previous/next channel in the
current channel list.
Displays the current program details.
Increases/Decreases the volume.
You can adjust the brightness.
Moves to the selected channel by pressing
the corresponding number key.
33
]A black screen with “no available channel” message is
displayed.
1. Select "Option" menu.
2. Select “9. Update TV Guide”.
3. Please wait for a while.
4. If “I6. Information show on” was selected, “ESG
Update Indicator” shall be displayed.
5. After “ESG Update indicator” is disappeared, move
the joystick to the left/right or press a number key.
6. TV shall be played.
DVBH
Profiles [Menu 2]
34
You can select ringtone or vibration for an incoming
call and configure the sound and volume of the
ringtone, key tone, and sound effect, according to a
profile. The profiles provided include [Normal],
[Silent], [Vibrate only], [Outdoor], [Headset],
[Customised 1], [Customised 2], and [Customised 3].
Select a profile, and press to activate the profile.
After pressing the left soft key [Options], select the
Edit menu for the [Normal], [Outdoor], [Headset],
[Customised 1], [Customised 2] and [Customised 3]
profile to change the configuration. A different list of
options is available for each profile that has been
selected for editing.
Alert by
This option determines the incoming call notification
mode. You can select from [Ring], [Vibration], [Silent],
[Ring & vibration], [Ring after vibration], [Max Ring &
Vibration].
Voice ringtone
You can select the ringtone for incoming voice calls.
Video ringtone
You can select the ringtone for incoming video calls.
Volume
Set the ringtone volume.
Message alert
You can set how often the phone is to inform you of a
received message until it is read.
Message tone
You can select a file from among your own personal
files or from the default files, to be played by the
phone upon receiving a message.
Key tone
You can set the key tone to be played when pressing
the keys.
Key tone volume
You can set the volume of the chosen key tone,
choosing from 7 available levels.
Flip tone
Select the desired tone the phone will emit when you
open/close the phone.
Profiles
Profiles
35
Confirmation tone
You can set the confirmation tone to be played by the
phone to confirm actions.
Switch on sound
You can set the effect to be played when the phone is
switched on.
Switch on file
You can select which file will be played when the phone
is switched on.
Switch off sound
You can set the effect to be played when the phone is
switched off.
Switch off file
You can select which file will be played when the phone
is switched off.
Screen Menu 3.1
This menu allows you to personalise the display
options of the screens and of the menus entire graphic
interface.
Screen theme (Menu 3.1.1)
You can set the screen theme to be displayed on the
main screen.
Home screen
]
Wallpaper:
You can select an image to be displayed
on the main screen.
]
Display items:
You can select which items to display
on the screen: Calendar + Clock, Calendar, Clock,
Dual clock or Do not show.
]
Shows shortcut icons:
Decide whether to display
the shortcut icons or not.
Outgoing call
You can select the image to be displayed while dialling
a number.
Switch on
You can select the image to be displayed while the
phone is being switched on.
Switch off
You can select the image to be displayed while the
phone is being switched off.
Menu style (Menu 3.1.2)
You can select the desired menu style from Grid style
and One by one style.
Font (Menu 3.1.3)
You can set the font style, dialling font size, and
dialling font colour using the joystick.
Backlight (Menu 3.1.4)
You can set the backlight duration on the Home screen
and Keypad individually.
Greeting message (Menu 3.1.5)
After selecting On, you can write a greeting message.
Settings [Menu 3]
36
Settings
37
Settings
Date & time Menu 3.2
Although the current time is automatically configured
when the phone is registered to the network, users can
configure the time and date directly using this menu.
The time configured by the user is valid only while the
phone is turned on.
Time (Menu 3.2.1)
1. Select the
Time
item from the Date & time list, and
then press .
2. Move to your desired field,
Hour
,
Minute
, or
am/pm field using the navigation keys. (When you
have selected
12 hour
as
Time format
)
3. Enter
Hour
, and
Minutes
using the number keys.
4. Select the time format using by moving the joystick
to the left/right.
5. Scroll down to select the hour indicator format i.e.
Off, Cuckoo clock or Chime bell.
6. Press the right soft key [Done] to set the time with
the specified value.
Date (Menu 3.2.2)
1. Select the
Date
item from the Date & time list, and
then press .
2. Select the date format using by moving the joystick
to the left/right.
3. Enter
Day
,
Month
and
Year
using the number keys.
4. Press the right soft key [Done] to set the date with
the specified value.
Auto update date/time (Menu 3.2.3)
When Auto Update is configured to
On
, the time and
date are automatically updated according to the
current time zone. If Confirm first is selected, the time
and date update is confirmed before it is updated
automatically.
Daylight saving (Menu 3.2.4)
Select whether to activate the daylight saving function
or not. You can set the Summer time difference of
selected home city for 1 hour or 2 hours.
Settings
38
Settings
Auto key lock Menu 3.3
Allows you to set on
Auto key lock
function.
When you don't press any key during the time you set,
the keypad is locked automatically.
]To deactivate key lock, you should press [Unlock]
then press the key or rotate the screen.
Network Menu 3.4
Select network (Menu 3.4.1)
Select between
Automatic
and
Manual
.
]
Automatic:
Automatically searches for the network
and registers the handset to the network. This is
recommended for best service and quality.
]
Manual:
All the currently 2G(GSM) and 3G(UMTS)
available networks are shown and you can select one
of them for registration. If the registration of the
network has failed, all the currently available
networks are listed again and you can select any
other one for registration.
Network mode (Menu 3.4.2)
You can set a type of network to search for when
networks are searched in the
Select network
menu.
]
Automatic:
Searches all the networks connectable.
]
UMTS:
Searches only networks supporting 3G.
]
GSM 900/1800:
Searches only networks
supporting GSM 900/1800 band.
]
GSM 1900:
Searches only networks supporting
GSM 1900 band.
Preferred lists (Menu 3.4.3)
If the network is searching automatically, you can add a
preferable network to be connected to. And the
following options are available.
]
Add new:
You can add a new network using the
followings.
-
Search:
You can select one from the network list
stored in the phone.
-
Enter new network:
You can enter the country
code (MCC) and the network code (MNC) to add.
After setting, press Done key.
]
Edit:
You can modify the information of the selected
network.
39
Settings
]
Delete:
Deletes the selected network.
]
Move up:
Moves the selected network upward.
]
Move down:
Moves the selected network downward.
Flight mode Menu 3.5
When you activate the flight mode by selecting
On
,
the phone switches off all radio signals. Calls cannot be
made or received and messages cannot be sent or
received. Except those, you can use other functions of
the phone.
Access points Menu 3.6
This menu shows the access point list. You can create
new profiles, delete or edit them by using the Option
Menu. However, you cannot delete or edit default
configurations depending on country variant.
You can edit the following configuration items by
selecting the right soft key.
]Press
Done
key to save any configuration changes.
Security Menu 3.7
PIN code request (Menu 3.7.1)
When this is set to On, you are requested to enter
your PIN each time you switch the phone on.
Connection title
Bearer
Authentication
User name
Password
APN
Access Point profile name.
Choose the bearer from the list.
(Default is UMTS.)
Choose the authentication from the list.
(Default is No auth)
Information provided by service provider.
Information provided by service provider.
APN name to access network. Information
provided by service provider.
Note
]Press in the PIN code entry window to
return to the previous step.
]3 incorrect PIN code entries would invalidate the
PIN code. And you have to enter the PUK (PIN
Unblock Key) code to configure the PIN code
again.
Settings
40
Settings
Handset lock (Menu 3.7.2)
You can lock your phone. The following 4 lock
functions are available.
When switching on:
Locks the handset whenever the
handset is switched on.
If USIM changed:
Locks the handset when the
phone's USIM card has been changed.
Immediate:
Locks the handset immediately.
None:
Deactivates the lock function.
You are requested to enter the security code to
confirm the selection.
]To unlock the handset, you need to enter the
security code.
Change codes (Menu 3.7.3)
You can change the PIN, PIN2, the mobile phone
password and the call barring password.
PIN code
PIN is the abbreviation for Personal Identification
Number, and is used to restrict use by an unauthorised
user.
PIN code change procedure
1. Select ‘PIN code’ from the ‘Change codes' list and
then press .
2. Enter the current PIN code, and press .
3. Enter the new PIN code, and press .
4. Enter the new PIN code once again, and press .
]If the PIN code is different from that of step 3, the
procedure is restarted from step 3.
5. When the PIN code is changed properly, a
Changed
message is displayed. If you enter an incorrect PIN
code in step 2, the procedure is restarted from step
2, and the number of attempts you have left to
enter the number decreased by 1.
Note
]The maximum number of times you may enter the
PUK code is 10. (Note: If you enter an incorrect
PUK code 10 times, the USIM card will be
blocked and must be replaced.)
]If the PIN code request cannot be disabled by
operator settings, you will not be able to choose
this menu item.
Settings
41
6. Press in the PIN code entry window to
return to the previous step.
PIN2 code
PIN2 is the abbreviation for Personal Identification
Number 2, and is used to restrict use by unauthorised
users as with the PIN. The PIN2 code change
procedure is the same as the one for the PIN code. 3
incorrect PIN2 code entries would invalidate the PIN2
code. In this case, you have to enter the PUK2 code in
order to use the PIN2 code again. The maximum
number of times you may try to enter the PUK2 code
is 10, like PUK1. 10 incorrect PUK2 code entries
would invalidate the PIN2 code.
Security code
The security code is used to change the mobile phone
password. The maximum number of attempts to enter
the security code is not limited as it is with PIN and
PIN2.
Power save mode Menu 3.8
Decide whether to activate the power save mode or
not.
Language Menu 3.9
Select the display language. You can select
Automatic
language option to change display language to the
USIM card supported language.
Memory status Menu 3.0
Common memory (Menu 3.0.1)
This function shows the status of the user memory of
the mobile phone. Since this function scans the overall
file system for statistics, a few seconds are required.
Note
]Three incorrect PIN code entries in the PIN code
entry window would invalidate the PIN code. In
this case, you have to enter the PUK (PIN
Unblock Key) code to configure the PIN code
again. The maximum number of times you may
enter the PUK code is 10. (Note: If you enter an
incorrect PUK code10 times, the USIM card will
be blocked and must be replaced.)
Settings
42
Settings
Reserved memory (Menu 3.0.2)
This function shows the status of the reserved
memory. The usual contents are Text messages,
Contacts, Calendar, To do, Memo. And it gives a clear
illustration of the actual amount compared with the
total amount for each item.
USIM memory (Menu 3.0.3)
This function shows the status of the USIM card user
memory.
External memory (Menu 3.0.4)
This function shows the status of the External card
user memory. This function displays the In-use and free
memory usage statistics.
Format external memory (Menu 3.0.5)
Select this to format the external memory.
Handset information Menu 3.*
This functions shows the USIM card telephone number,
model name and software version of the mobile phone.
Reset settings Menu 3.#
Clear memory (Menu 3.#.1)
Select this to clear the memory. You are requested to
enter the security code.
]
Handset contents:
Deletes all the multimedia
contents downloaded.
]
Handset personal info.:
Deletes personal
information such as received messages or emails.
Default setting (Menu 3.#.2)
Select this to reset your phone to its default
configuration. You are requested to enter the security
code.
Vodafone live! [Menu 4]
43
Vodafone live!
Vodafone live! Menu 4.1
You can launch the web browser and access the
homepage of the web service provided by Vodafone.
]You can also directly access Vodafone live! by
pressing the right soft key in idle mode.
Bookmarks Menu 4.2
You can store frequently accessed or favourite
URLs/Pages.
Open
,
Send
,
Add new
,
Edit
,
Mark/Unmark
or
Delete
operations can be
performed on
Bookmarks
. Several preconfigured URLs
are stored as bookmarks.
Adding a new bookmark
1. Press the right soft key [Add].
2. Enter the title and associated URL information.
3. Press the right soft key [Done] to save.
Connecting to a desired bookmark
Press or select
Open
from the
Options
menu.
Sending the bookmark to others
Select
Send
from
Options
menu. You can send it via
Message
or
Email
.
Deleting a bookmark
Select
Delete
from
Options
menu. You can delete
multiple bookmarks using the
Mark/Unmark
option.
Saved pages Menu 4.3
The phone can save the page on display as an offline
file. Up to 20 pages can be saved.
Go to URL Menu 4.4
Enter address (Menu 4.4.1)
You can manually enter a URL address and access the
associated web page.
]To enter a symbol, press or the right soft key
[Symbol] to display the Symbol table.
]To switch input mode, press .
Recent pages (Menu 4.4.2)
Shows the recently-browsed pages.
Vodafone live!
44
Vodafone live!
Security Menu 4.5
Certificates (Menu 4.5.1)
If stored, a list of root/ca certificates required for
WTLS/TLS can be found here.
Certificates can be viewed from the list.
Session clear (Menu 4.5.2)
Secure (WTLS/TLS) session data can be cleared using
this option. Session data should be cleared to establish
a new secure session.
Browser settings Menu 4.6
You can change the settings for browser display,
security, and certificates.
Profiles (Menu 4.6.1)
Select the appropriate profile by pressing . This will
activate the profile to initiate the browser launch.
Character encoding (Menu 4.6.2)
Sets the browser default character set to one of the
following:
Automatic, English(ASCII), English(ISO),
English(LATIN), Unicode(UCS2 BE), Unicode(UCS2
LE), Unicode(UCS2 Auto), Unicode(UTF-16 BE),
Unicode(UTF-16 LE), Unicode(UTF-16 Auto),
Unicode(UTF-8).
Scrolling control (Menu 4.6.3)
Allows you to set the scroll speed by selecting the
number of lines to scroll. Select one from Small(1 line),
Medium(2 lines), Large(3 lines).
Show image (Menu 4.6.4)
Allows you to enable or disable the image display
during browsing.
Note
]Enabling this function will delay displaying images
until the completion of transmission. Disabling
this function will prevent the browser from
downloading images from the server, thus allowing
faster transmission.
Vodafone live!
Cache (Menu 4.6.5)
Enabling Cache allows you to store accessed pages to
your phone. Once a page has been stored in the
Cache it will greatly enhance the page loading speed
on subsequent browsing of the same page.
Cookies (Menu 4.6.6)
Enabling Cookies allows you to store cookies sent from
the server. Disabling this function will prevent cookies
from being stored on your phone.
Clear cache (Menu 4.6.7)
Select this to clear all caches.
Clear cookies (Menu 4.6.8)
Select this to clear all cookies.
Streaming settings Menu 4.7
If you want to set different network setting to play
streaming content, you can set different network
settings.
45
Messages [Menu 5]
46
Messages
Create new message Menu 5.1
Text message (Menu 5.1.1)
1. Enter a number in the To field directly or search for
a number from the Contacts.
Option menus in To field
]
Add contacts:
You can add recipients from your
Contacts or enter the number directly.
]
Send:
Select this to send the message.
]
Save to drafts:
Saves the message to drafts.
]
Cancel:
Select this to cancel editing.
2. Moving the joystick to the down shows another To
field in which you can enter a number.
(You can enter up to 10 numbers)
3. If you press the joystick to the down, the focus is
moved to the Message field.
4. Enter your message in the Message field.
Option menus in Message field
]
Insert:
You can perform the following actions:
1.
New slide:
Select this to add a new slide.
2.
Symbol:
You can insert symbols. After entering
the corresponding number keys, press OK.
3.
Templates:
You can insert a text template saved
on the phone. After selecting one, press OK. The
selected template is inserted into the Message
window.
4.
Emoticons:
You can insert emoticons. After
entering the corresponding number keys, press
OK.
5.
Contacts:
You can add a name and/or a number
stored in the Contacts. Make your selection to
send either the Name, Number or Name &
Number and press OK. The Contacts list opens
and you can search the desired contact to be
inserted.
6.
Image:
You can insert an image.
(One image per slide)
7.
Videos:
You can insert a video clip.
(One video clip per slide)
8.
Sound:
You can insert a sound file.
(One sound per slide)
47
Messages
9.
New image:
The camera module opens and you
can take a picture. The picture is then inserted in
the message window. (One picture per slide).
0.
New video:
The video recorder module opens
and you can record a video. The recorded video is
inserted in the message. (One video clip per slide)
*.
New sound:
The voice recorder module opens
and you can record a sound. The recorded sound
is inserted in the message. (One sound per slide)
#.
Cc/Subject:
Select this to insert Cc or a subject.
]
Send:
Select this to send the created message.
]
Save to drafts:
Select this to save the message to
drafts.
]
Dictionary:
Select the desired dictionary mode.
]
Add to dictionary:
You can add a word to the
dictionary.
]
Cancel:
Select this to cancel editing.
5. Press the right soft key [Send] to send the message.
The message will automatically be saved in the Sent
messages folder. If the message has not been sent, it
will remain in the Outbox with a failed status.
Multimedia message (Menu 5.1.2)
You can write and edit a message containing a
combination of text, image, video and audio.
1. Enter a number in the To and Cc fields directly or
search for a number from the Contacts. You can
enter up to 10 number in To and Cc respectively.
If you press the joystick to the down without any
input in the field, the cursor goes to the next field.
2. Enter the subject of the message in the Subject
field.
3. Enter your message in the Message field.
Option menus
]
Add contacts (To/Cc field only):
You can add
recipients from your Contacts or enter the number
directly.
]
Insert:
You can perform the following actions:
Note
]In Text Message, If you insert an image, a sound,
a video clip, CC or subject, the screen is changed
to Multimedia Message screen.
Messages
48
Messages
1.
New slide:
Select this to add a new slide.
2.
Symbol:
You can insert symbols. After entering
the corresponding number keys, press OK.
3.
Templates:
You can insert a text template saved
on the phone. After selecting one, press OK. The
selected template is inserted into the Message
window.
4.
Emoticons:
You can insert emoticons. After
entering the corresponding number keys, press
OK.
5.
Contacts:
You can add a name and/or a number
stored in the Contacts. Make your selection to send
either the Name, Number or Name & Number and
press OK. The Contacts list opens and you can
search the desired contact to be inserted.
6.
Image:
You can insert an image.
(One image per slide)
7.
Videos:
You can insert a video clip.
(One video clip per slide)
8.
Sound:
You can insert a sound file.
(One sound per slide)
9.
New image:
The camera module opens and you
can take a picture. The picture is then inserted in
the message window. (One picture per slide).
0.
New video:
The video recorder module opens
and you can record a video. The recorded video is
inserted in the message. (One video clip per slide)
*.
New sound:
The voice recorder module opens
and you can record a sound. The recorded sound
is inserted in the message. (One sound per slide)
]
Send:
Select this to send the created message.
- Now:
You can immediately send the message.
- Later:
Configures the delivery time of message to
the recipient. The Multimedia message centre will
deliver the message after the delivery time.
]
Save to drafts:
Select this to save the message to
drafts.
]
Set slide:
You can configure the play time, the text
colour and the background colour of each of the
sldes.
]
Dictionary:
Select the desired dictionary mode.
]
Add to dictionary:
You can add a word to the
dictionary.
]
Cancel:
Select this to cancel editing.
Messages
49
4. Press the right soft key [Send] to send the message.
The message will automatically be saved in the Sent
messages folder. If the message has not been sent, it
will remain in the Outbox with a failed status.
Email (Menu 5.1.3)
To send/receive an email, you should set up the email
account. (Refer to page 54-56 for how to set up an
Email account.)
1. Enter the email addresses of the recipients in the To,
Cc, Bcc fields. You can search the Contacts by
pressing .
Note
]
You can send a multimedia message straight from
your camera, camcorder or sound recorder.
1. After taking a picture with the camera,
recording a video with the camcorder or
recording sound with the Sound Recorder.
2. Select Send.
3. Select Send via Multimedia msg.
4. The selected image, video, or sound is inserted
into the Multimedia msg.
5. Select Send Message from the Options Menu
or press the right soft key The message is
transmitted.
Note
]
Enter the reference email address to forward the
email in Cc(Carbon copy) field.
]
Enter a hidden reference email address to forward
the email without forwarding information in
Bcc(Blind Carbon Copy) field.
]
Only valid email addresses are allowed for the
recipient (To), reference address (Cc) and hidden
reference address (BCC) fields. When an email
address has been specified, another field where
you can specify another address appears. You can
specify up to 20 recipients for the To and Cc
address fields and 10 recipients for the BCC
address field.
Messages
50
Messages
2. Move the cursor to the Subject field and key in the
subject.
3. You can enter the message contents by moving the
cursor to the Message field.
4. Use the following functions by using the left soft
key [Options].
]
Insert:
Select this menu to insert special
characters, templates, and contacts. It is also
possible to attach multimedia files
(pictures, videos and sounds).
]
Add contacts:
Select this menu to insert email
addresses saved in Contacts.
(Only shown in Option menu when cursor is
located in To/Cc/Bcc fields.)
]
Preview:
You can preview the created email before
sending it.
]
Send:
Sends the created email.
]
Save to drafts:
Select this menu to save the
message in Drafts.
]
View attachment:
Shows the attached files.
(This item is only available when some files have
been attached.)
]
Dictionary:
Select the desired dictionary mode.
]
Add to dictionary:
You can add a new word to
the dictionary.
]
Set mail priority:
You can configure the priority
of the email you wish to send.
]
Cancel:
Exits the email composer.
5. When you have finished writing an email, press the
right soft key [Send] to send the email.
Inbox Menu 5.2
1. You can view saved messages. Select a message and
then press to view the message.
2. You can view the previous or next message by
moving the joystick to the up/down.
3. To view a multimedia message (Notification), select
Retrieve
in the message notification view screen.
Then the file is transmitted, and you can view the file
when the transmission is complete.
You can use the following functions by using the left
soft key [Options] in the Inbox.
Messages
51
]
Reply:
Creates a reply to the sender or all
recipients of the selected message.
[
Note:
Not supported for multimedia message
(Notification) and WAP push messages.]
]
Forward:
Forwards the selected message.
[
Note:
Not supported for multimedia message
(Notification) and WAP push messages.]
]
View:
Opens the selected message.
]
Create new message:
You can write a new
message or an Email.
]
Make video call:
You can make a video call.
]
Save address:
Saves the sender's number.
]
Mark/Unmark:
You can select one or more
messages for multiple deletion.
]
Filter:
Displays messages by desired message
types.
]
Delete:
Deletes the current message.
]
Copy:
In case of SMS, you can copy the message
into handset or USIM.
]
Move:
In case of SMS, you can move the message
into handset or USIM.
]
Message info.:
You can check the message type,
date and time and where it is saved.
Mailbox Menu 5.3
Viewing e-mail message list
1. Select an e-mail account and then press the Select
key to view the received e-mail list.
2. Using the Retrieve key, you can retrieve a new email
list from the e-mail server of the selected account.
3. In e-mail list, you can use the following functions by
using the [Options] key.
]
Reply:
Creates a reply to the selected e-mail.
]
Reply all:
Creates a reply to all the recipients.
]
Forward:
Forwards the selected e-mail message to
another e-mail address.
]
Open:
Opens selected e-mail.
]
Retrieve:
Retrieves new e-mail messages.
Note
]
You can check the saved Emails in Email
[Menu 5.6].
Messages
52
Messages
]
New message:
Creates new message.
]
Mark/Unmark:
Use mark/unmark option.
]
Delete:
Deletes an e-mail. Deleted e-mails are
temporarily saved in Trash.
]
Delete from phone and server:
Delete a
selected e-mail from phone and server.
Viewing an e-mail message
1. Select one of the received e-mails and press the OK
key to receive the contents of the e-mail.
2. The contents of the received e-mail are
automatically displayed in the View screen.
3. You can view the contents of the previous or next
email by using the left/right soft keys.
4. In the e-mail View screen, you can select the
following functions by using the [Option] key.
]
Reply:
Creates a reply to the selected e-mail
message.
]
Reply all:
Creates a reply to all the recipients.
]
Forward:
Forwards the selected e-mail message to
another e-mail address.
Drafts Menu 5.4
You can view saved messages. Select a message and
then press to edit the message.
You can use the following functions by using the left
soft key [Options].
]
Edit:
You can edit messages.
]
Send:
Sends the selected message.
]
Create new message:
You can write a new message
or an Email.
]
Make video call:
You can make a video call.
]
Mark/Unmark:
You can select one or more
messages for multiple deletion.
]
Filter:
Displays messages by desired message types.
]
Delete:
Deletes the selected message.
]
Message info.:
You can check the message type,
date and time and where it's saved.
53
Messages
Outbox Menu 5.5
The Outbox is a temporary storage place for messages
waiting to be sent. Failed messages are also placed in
Outbox. For example, Emails will be placed in Outbox if
the Email account is not correctly configured.
1. Select a message and then press to view the
message.
2. You can use the following functions by using the left
soft key [Options].
[For sending / waiting messages]
]
Create new message:
You can write a new message
or an Email.
]
Cancel:
You can stop sending/waiting status.
]
Message info.:
You can check the message type,
date and time and where it's saved.
[For sending a failed message]
]
Resend:
Resends the selected message.
]
Save to drafts:
Select this to save the message to
drafts.
]
Create new message:
You can write a new message
or an Email.
]
Make video call:
You can make a video call.
]
Delete:
Deletes the current message.
]
Message info.:
You can check the message type,
date and time and where it's saved.
Sent items Menu 5.6
Shows the messages you sent (Message/ Postcard/
Email).
[Options]
]
Reply:
Creates a reply to sender or all recipients of
the selected message.
]
Forward:
Forwards the selected message.
]
View:
Opens the selected message.
]
Edit:
You can edit the selected message.
]
Create new message:
You can write a new message.
]
Make a video call:
You can make a video call.
]
Save address:
Saves the receiver's number.
]
Mark/Unmark:
You can select one or more
messages for multiple deletion.
]
Filter:
Displays messages by desired message types.
Messages
54
]
Delete:
Deletes the current message.
]
Copy:
In case of SMS, you can copy the message
into handset or USIM.
]
Move:
In case of SMS, you can move the message
into handset or USIM.
]
Message info.:
You can check the message type,
date and time and where it is saved.
Templates Menu 5.7
You can add, edit, and delete frequently used useful
phrases using the left soft key [Options].
Emoticons Menu 5.8
You can add, edit, and delete emoticons using the left
soft key [Options].
Settings Menu 5.9
Text message (Menu 5.9.1)
You can configure text message related options.
1.
Text message centre:
Input the address of the Text
message centre.
2.
Delivery report:
By enabling this option, you can
verify whether your message has been sent
successfully.
3.
Validity period:
This network service allows you to
set how long your text messages will be stored at
the message centre.
Note
]
Depending on your service provider, useful
phrases are saved as a default.
Messages
55
Multimedia message (Menu 5.9.2)
You can configure Multimedia message related options.
1.
Delivery report:
Allows you to determine whether
to request a delivery confirmation mail to a
recipient, and whether to allow sending a delivery
confirmation mail to a sender.
]
Request report:
Determines whether to request a
delivery confirmation mail for a Multimedia
message.
]
Allow report:
Determines whether to allow
sending a delivery confirmation mail for a delivery
confirmation mail request.
2.
Read reply:
Allows you to determine whether to
request a read confirmation mail to a recipient, and
whether to allow sending a read confirmation mail to
a sender.
]
Request reply:
Determines whether to request a
read confirmation mail for a Multimedia message.
]
Allow reply:
Determines whether to allow sending
a read confirmation mail for a read confirmation
mail request.
3.
Priority:
You can select the priority level of the
messages (Low, Normal and High).
4.
Validity period:
Allows you to configure the term of
validity for a message when transmitting a
multimedia message. The message would be saved in
the multimedia message server only for the
configured term.
5.
Slide duration:
Allows you to configure the
duration of each page when writing a message.
6.
Multimedia msg. centre:
Allows you to configure
network information such as the MMSC and the
WAP gateway, to send a multimedia message.
Using the left soft key [Options], you can activate, add
or delete a profile. A profile name selected by a
checkmark is the currently configured value. You can
view and edit the contents of the profile in edit mode
by pressing the right soft key [Edit]. The edit screen
also appears when creating a new profile under
Options. The meaning of each item is given below.
]
Title:
Profile name.
]
MMSC URL:
Enter the multimedia message centre
URL.
Messages
Messages
56
]
MMS Proxy:
Enter the WAP gateway address and
port number.
]
Connection mode:
Select one of the connection
mode. (TCP with Proxy, TCP without Proxy, UDP)
]
Access points:
Specify the access point name. (see
WAP connection settings.)
Press the right soft key [Done] to save the changes
and complete Multimedia msg. centre setting.
Email (Menu 5.9.3)
You can configure settings for receiving and
transmitting emails.
1.
Allow reply email:
Determines whether to allow
sending a read confirmation mail for a read
confirmation mail request.
2.
Request reply email:
Determines whether to
request a read confirmation mail.
3.
Retrieve interval:
You can configure Auto retrieve
to retrieve emails automatically from the incoming
mail server. When a new email arrives, an icon
appears at the top of the screen. You can select the
auto receiving time slot to
Off
,
15 minutes
,
30
mins
or
1 hour
,
2 hours
,
4 hours
or
8 hours
.
Please note that additional charges may be incurred
using the Auto retrieve feature.
4.
Include message in Fwd. & Reply:
Determines
whether to include the received message when you
forward the message or reply to it.
5.
Signature:
You can configure a text signature to be
attached to the end of an email. The configured
signature text is automatically or manually attached
to the end of the email when it is sent.
6.
Email accounts:
You can create or configure an
email account including the email server and user ID.
You can edit a selected email account by pressing
the right soft key [Edit]. You can select an email
account to be used to send an email using . You
can select the following functions using the left soft
key [Options].
]
Add new:
Create a new email account.
Messages
57
]
Edit:
To edit the selected email account.
]
Activate:
Activates the selected account for
outgoing mail.
]
Delete:
Deletes a selected email account. All the
emails included in the account will be deleted.
Creating a new email account
1. Select
Add new
from the Email account menu
options.
2. The following items need to be configured.
Messages
Title Enter a title.
Username Enter the user name of the email account.
Password Enter the email account password.
Email address Enter the email address for outgoing mail.
Reply email Enter the email address to reply to
address your email.
Outgoing mail Enter the outgoing email server.
server
Incoming mail Enter the incoming email server.
server
SMTP port Enter the mail server port number. In
number general, the SMTP (Outgoing mail
server port number) is 25.
Incoming server Enter the mail server port number. In
port general, the incoming mail server port
number is 110(POP3) or 143(IMAP4).
Maximum receive Select the maximum email receive size
size using . The permissible maximum
receive size is no more than 500KB.
Mailbox type Select the email inbox type either POP3
or IMAP4 using .
Save to server Determine whether to leave a copy of
messages on the incoming server or not
using . When the mailbox type is set to
IMAP4, a copy of messages are always
saved to the server.
Save sent mail Select where to save the sent mails
into (when the mailbox type is set to IMAP4).
When the mailbox type is POP3, sent
mails are always saved into handset.
Access points Select an access point to connect to the
Internet. You can select a configured
access point using .
Auto retrieve Decide whether to activate Auto retrieve
or not using . You can set the auto
receiving time slot using the Auto retrieve
[Menu 5.9.3.4]. (See page 54.)
SMTP Decide whether the outgoing mail
authentication server to require authentication or not
using .
Messages
58
3. Press the right soft key [Done] to complete the
email account configuration.
Editing an email account
1. Select a desired email account from the email
account list and press the right soft key [Edit].
2. You can edit desired fields by moving the cursor up
and down.
3. When configuration is complete, press the right soft
key [Done] to complete the email account
configuration.
Voicemail (Menu 5.9.4)
You can insert or modify voice mail centre.
Service message (Menu 5.9.5)
You can configure the service message receipt option.
Info. Service (Menu 5.9.6)
]
Cell broadcast:
You can set the reception status.
]
Channels:
You can add or modify the channels.
]
Languages:
You can select the language you want
by pressing . Then, the info service message will
be shown in the language that you have selected.
Messages
APOP secure Decide whether to activate APOP
login secure login or not using . When the
mailbox type is IMAP4, APOP secure login
is always set to OFF.
Note
]
When you try to change the mailbox type, all
emails downloaded before would be deleted.
My stuff [Menu 6]
59
My stuff
My images Menu 6.1
The My images folder consists of embedded links for
downloading pictures through the Internet and Default
images.
Pictures taken using the camera are stored in the
Pictures folder and you can create new folders to
manage them. You can also save selected files as
animated Gifs and send multiple files to other people.
When a file is selected, the following options will be
displayed by pressing the left soft key [Options].
]
View:
You can view the selected picture.
]
Create new folder:
You can create a new folder
within the folder currently selected.
]
Send:
You can send the selected image via Message,
Postcard, Email or Bluetooth.
]
File
- Move:
Enables the file to be moved to other folder.
- Copy:
Enables the file to be copied to other folder.
- Rename:
You can rename the image.
- Edit:
Enables the image to be edited.
- Make GIF animation:
You can create an animated
GIF file with different photos (up to 10 files of
320X240 resolution with a 2Mbyte file size limit
for display).
- Info.:
Shows information on the selected image file.
]
Delete:
Deletes the selected image.
]
Mark/Unmark:
Using the Mark function, you can
send, delete, move and copy multiple files.
]
Main display:
You can set an image as the screen
theme (Home screen, Outgoing call, Start up image,
Power off image).
]
Slide show:
You can start a slide show.
]
Sort by:
You can sort the files by name, date, or file
type.
]
List view/Grid view:
You can view the images as a
List view or Grid view.
]
Memory status:
You can view the memory
status(handset or external memory card).
My videos Menu 6.2
Here you can manage or send downloaded or captured
videos clips.
The following are available using the left soft key
[Options] in the Video list.
]
Play:
Plays the video.
]
Create new folder:
You can create a new folder.
]
Send:
You can send the selected video clip via
Message, Email or Bluetooth if not protected by
Digital Rights Management (DRM).
]
File
- Move:
Moves the file into handset memory or
external memory.
- Copy:
Copies the file in handset memory or
external memory.
- Rename:
You can rename the video.
- Info.:
Shows information on the selected video file.
]
Delete:
Deletes the selected video.
]
Mark/Unmark:
Using the Mark function, you can
send, delete, move and copy multiple files.
]
Sound theme:
You can set a video as the voice
ringtone or video ringtone.
]
Sort by:
You can sort files by name, date, or file
type.
]
List view/Grid view:
Displays the video files as a
List view or Grid view.
]
Memory status:
Displays the memory
status(handset or external memory card).
You can view a video using the video player. Video files
are displayed in the list as thumbnails. You can select a
desired video by using the . Select a desired video
and select Play to view the recorded video.
Select the right soft key [Send] to attach the selected
video to a message, Email or Bluetooth.
When option
1. Play
is selected, the video clip will be
played with the Media Player. To pause the playback,
press during the playback. To resume the paused
playback, press once again.
To capture the screen shot, press the right soft key
[Capture] when the playback is paused.
To view the current playback in full screen, press the
right soft key during the playback.
My stuff
60
My stuff
61
My stuff
To return to the previous screen size, press the right
soft key once again in full screen mode.
When viewing video clips in the Media Player, the
following options are available:
]
Pause/Play:
You can play or pause a file for a
moment.
]
Send:
You can send the video via Email or Bluetooth
if the file is not protected by Digital Rights
Management (DRM).
]
Go to list:
Goes back to the list.
]
Delete:
Deletes the selected video.
]
Sound theme:
You can set a video voice ringtone
or video ringtone.
]
Wide view:
You can view the video view mode.
]
Mute/Unmute:
If the Volume is more than 0, Mute
mode is activated the Volume is set to 0, the
Unmute activated.
]
Capture:
You can save what is on paused screen as
an image file (possible in Pause mode).
Move to file
- Previous file:
Plays the previous video file.
- Next file:
Plays the next video file.
]
File info.:
You can check information on files being
played(File name, Size, Date, Type, Duration,
Protection).
My sounds Menu 6.3
The Sounds folder consists of embedded links for
downloading ringtones and music as well as folders
containing the Default sounds and Voice recordings.
Here you can manage, send or set sounds as ringtones.
Games & Applications Menu 6.4
You can easily download games and other applications
in this menu. It has two folders,
Games
and
Applications
, as default. Each folder has an embedded
link for downloading games or applications. Please note
that additional cost may be incurred when using online
services. You can create a folder using the left soft key
[Options].
My bluetooth files Menu 6.5
The files received using Bluetooth are saved in this
folder. You cannot create a sub-folder within the
Bluetooth data folder.
You cannot copy or move files that are not managed
by My Files.
The options displayed depend on the type of file
selected. For instance, in case of an image, the
following functions are supported.
]View/Edit/Move/Copy/Delete/Rename file(s).
]Mark/Unmark one or all file(s).
]Send a file via MMS, Email or Bluetooth if not
protected by Digital Rights Management (DRM).
]If relevant, you can set an image as the screen theme
(Home screen, Outgoing call, Start up image, Power
off image).
]If relevant, start or set (normal or full screen, at what
pace) a slide show.
]If relevant, create an animated GIF file with different
pictures.
]Sort the files by name, date or file type.
]Memory info(handset or external memory card).
]View file information.
Others Menu 6.6
Other files except pictures, sounds, videos, games &
applications are stored in this folder.
My memory card Menu 6.7
If you purchase an optional external microSD memory
card, you can manage more content. Refer to the
section
How to use a microSD memory card
on
page 21 and 22 to learn how to insert and remove the
memory card. You can manage content as you do on
your phone.
My stuff
62
My stuff
Note
]
For the image files of which resolution is
640x480 or above, you can send them via
Postcard.
63
My stuff
Play lists Menu 6.8
This option enables you to view a list of saved
audio/video files.
You can add an audio/video file stored in your phone
and memory card.
Press the left soft key [Options] to display the
following popup menu items.
]
Play:
Plays the selected audio/video file.
]
Add new:
You can add a new file from the
sound/video list.
]
Delete all:
Deletes all the stored audio files.
]
Set repeat:
Select desired repeat mode using the
navigation key.
Multimedia [Menu 7]
64
Multimedia
Video camera Menu 7.1
This application enables you to record a video clip. You can play and watch a saved video file in this menu. Once
recorded, a video clip can be sent by Message, Email or Bluetooth.
1. Press the left soft key to access
Options
and set the desired environment as follows.
]Move between the options menus by moving the joystick to the left/right.
]Select the desired value by moving the joystick to the up/down and confirm the selection by pressing the
joystick.
Displays the current
camera settings.
Press the to record
a video clip.
The My video folder is launched
and displays existing videos as
thumbnails. You can view videos
by pressing . You can also send
the selected video to another
party via Multimedia message,
Email or Bluetooth.
65
Multimedia
2. After finishing all the settings, press the right soft
key [Close].
3. Focus the camera on what to record and press
to start recording.
And press to stop recording.
]You can pause the recording by pressing the right
soft key [Pause].
4. Press to save the video clip. It is saved in the
Videos folder of My Files.
You can directly send the video clip via Message,
Email or Bluetooth by pressing the right soft key
[Send].
Quality Super fine ( ), Fine ( ),
Standard ( )
Light Off, Always on ( ), When recording ( )
Zoom x1 ( ), x2 ( ) (Note: Available zoom
level depends on the size.)
]
You can zoom in by moving the joystick
to the up or zoom out by moving the
joystick to the down in preview mode.
Brightness From –2.0 to 2.0 at 0.5 intervals. The
higher the level, the brighter the screen.
]
You can adjust the brightness using
in preview mode.
White balance You can adjust the tone of the background
video according to the weather.
Auto, Daylight, Cloudy, Illuminate,
Indoors
Night mode You can take better shots at night by
selecting On.
Effect None, Black & White, Negative, Sepia
Swap cam You can switch the camera to activate
either Internal or External.
Duration Select the desired recording time.
Message, 30 seconds, 1 minute, 2
minutes, 5 minutes and 60 minutes
Memory Select the desired memory, either
Handset or External.
Mirror You can activate the mirror effect by
selecting On.
Sound Decide whether to record the sound or
not.
Size 320x240, 176x144, 128x96
Multimedia
66
Multimedia
Camera Menu 7.2
This application enables you to take a still picture. You can take a picture in the size you want, and use it for the
address book photo, home screen and other more general purposes.
Once taken, the picture can be sent by Message, Postcard, Email or Bluetooth.
1. Press the left soft key to access
Options
and set the desired environment as follows.
]Move between the options menus by moving the joystick to the left/right.
]Select the desired value by moving the joystick to the up/down and confirm the selection by pressing the
joystick.
Displays the current
camera settings.
Press to take a picture.
The My images folder is launched
and displays existing pictures as
thumbnails. You can view pictures
by pressing OK. You can also send
the selected picture to another
party via Multimedia message,
Email or Bluetooth.
67
Multimedia
2. After finishing all the settings, press the right soft
key [Close].
3. Focus the camera on what you want to take and
press .
4. Press to save the picture. It is saved in the
Pictures folder of My Files.
You can directly send the picture via Message,
Postcard, Email or Bluetooth by pressing the right
soft key [Send].
Size 1280x960 ( ), 640x480 ( ),
320x240 ( ), 240x320 ( ),
Contact ( )
Quality Super fine ( ), Fine ( ),
Standard ( )
Light Off, Always on ( ), When taking ( )
Multishot One, Three ( ), Six ( ), Nine ( )
(Note: Available multishot depends on the
size.)
Zoom x1 ( ), x2 ( ) (Note: Available zoom
level depends on the size.)
]
You can zoom in by moving the joystick
to the up or zoom out by moving the
joystick to the down in preview mode.
Brightness From –2.0 to 2.0 at 0.5 intervals. The
higher the level, the brighter the screen.
]
You can adjust the brightness using
in preview mode.
White balance You can adjust the tone of the background
photo according to the weather.
Auto, Daylight, Cloudy, Illuminate,
Indoors
Night mode You can take better pictures at night by
selecting On.
Frame Shot You can apply one of 9 frame effects when
taking a picture.
(available only in case of 320x240 size)
Timer You can delay the camera shutter time.
None, 3 seconds, 5 seconds, 10 seconds
“ ” is shown when the timer is activated.
Effect None, Black & White, Negative, Sepia
Sound Select the desired shutter sound.
Memory Select the desired memory, either
Handset or External.
Mirror You can activate the mirror effect by
selecting On.
Switch You can switch the camera to activate
either the Internal or the External camera.
Multimedia
68
Multimedia
Voice recorder Menu 7.3
1. Press the left soft key [Options] to display the
option pop up menu before recording.
2. Move to the desired menu item by moving the
joystick to the up/down and press .
]
Quality:
You can select a recording quality from
High
,
Medium
and
Low
.
]
Duration:
You can set the recording duration to
MMS msg. size, 30 secs, or 1 min.
]
Rec.:
Select this menu to start recording to a new
file.
]
My stuff:
Opens the Voice recordings folder in My
Files.
3. Pressing starts recording. When a recording is
started, the recording time appears on the LCD. To
cancel the recording, press the right soft key
[Cancel].
4. When you finish the recording, press to exit.
The recorded file is automatically saved in the Voice
recordings folder in My files.
5. When no recording is in progress, pressing
starts recording on a new file.
When no recording is in progress, press the right
soft key [Send] to send a recorded file.
Select one from Message, Email, or Bluetooth using
the joystick.
6. Press the left soft key to select the various options
after the voice recording.
7. Select the desired menu using the joystick.
]
Delete:
Select this menu to delete a recorded file.
]
New recording:
Select this menu to start a new
voice recording.
]
Send:
To send the recorded file. Select one from
Message, Email and Bluetooth using the joystick.
]
Sound theme:
You can set the recorded file as
the
Voice Ringtone
,
Video Ringtone
,
Switch on
sound
or
Switch off sound
.
]
My Files:
Opens the Voice recordings folder in My
Files.
8. Press the right soft key to close the sub-menu
popup window.
Contacts [Menu 8]
69
Contacts
Add new Menu 8.1
You can register a new contact address. You can enter
the name, different phone numbers and email
addresses of a new contact. You can also assign the
contact to groups, include an image or avatar, assign a
specific ringtone and even enter a memo for the
contact. Other available fields include Home page URL,
Home address, Company name, Job title and company
address. You can enter and manage contact addresses
depending on the memory usage.
Search Menu 8.2
Performs the contact address search function. The
search operation is performed based on a name as a
default. The current search method and results found
are displayed in the Search window. You can make a
phone call or send a message to the selected phone
number. A Contacts search can be performed based on
the phone number or group information.
Speed dials Menu 8.3
Using this menu you can manage speed dials. Speed
dials are configured between 2-9. You can register
speed dials for a specific contact address up to 5
different numbers, and a contact address may have
multiple speed dials.
Groups Menu 8.4
Using this menu you can manage group information
(both stored in the Handset and the USIM). In the
handset memory, there are 4 default groups: Family,
Friends, Colleagues and School. You can add, edit and
delete groups. When a ringtone for a number is not
specified, a call from the number sounds the group
ringtone assigned to the number for the group.
Service dial numbers Menu 8.5
You can view the list of Service Dialling Numbers
(SDN) assigned by your service provider (if supported
by the USIM card).
Such numbers include emergency, directory enquiries
and voice mail numbers. After selecting a service
number, press to dial the servic
Contacts
70
Contacts
Own number Menu 8.6
Allows you to display your phone number in the USIM
card. You can save own numbers being used in the
USIM card.
Settings Menu 8.7
Display data (Menu 8.7.1)
Select which contact information shall be displayed
(from handset memory, from USIM card or both).
Handset
&
USIM
is the default setting.
Show image/avatar (Menu 8.7.2)
Select whether to display image/avatar or not.
Copy all (Menu 8.7.3)
You can copy contacts from the phone memory to the
USIM or from the USIM to the phone memory. You can
copy all items or one at a time.
Move all (Menu 8.7.4)
You can move contacts from the phone memory to the
USIM or from the USIM to the phone memory. You can
move all items or one at a time.
Clear contacts (Menu 8.7.5)
Clears all contact information. You can delete all
contacts saved in the mobile phone memory as well as
on the USIM card.
Application [Menu 9]
71
Application
This Handset supports JavaTM so that you can
download games and play them on your handset.
Games & Applications Menu 9.1
Games
This Games folder consists of embedded links for
downloading games through the Internet and default
games. And the downloaded games are stored in this
folder.
You can create new folders to manage them.
Applications
In has an embedded link for downloading applications
through the Internet. Downloaded applications are
stored in this folder.
Settings Menu 9.2
Activating a profile
1. Move the cursor to the profile you would like to
activate.
2. Press or select
Activate
from the
Options
menu.
Adding a new profile
1. Select
Add new
from the
Options
menu.
The following items need to be configured.
2. Press the right soft key [Done] to save any
configuration changes.
You can edit and delete a profile by selecting
Edit
and
Delete
from the
Options
menu.
Note
]
Additional charges may be incurred when
downloading games. Contact your service
provider for further information.
Service name Enter an account name for the profile.
Connection Choose from the given list of connection
mode modes. (Default is TCP with Proxy)
IP address Enter the WAP Gateway IP address provided
by the operator. (e.g. 195. 115. 025. 129)
Proxy server Port details are provided by the operator,
port depending upon the Connection mode.
Access point Choose from the given list of access points.
(For more details on adding or editing a new
access point, refer to page 100.)
Tools [Menu 0]
72
Tools
Quick menu Menu 0.1
Quick menu allows you to add your own favourites to
the list already provided.
]
Add new:
In the [Empty] list, press the right soft
key [Add]. Select the item from the menu and save
the desired menu item.
]
Open:
In the added menu items list, press the left
soft key [Options] or the key. To move to your
desired menu directly.
]
Edit:
In the added menu items list, press the right
soft key [Edit] or the left soft key [Options]. Select
Edit from the menu to edit a saved menu item.
]
Delete:
In the added menu items list, press the left
soft key [Options]. Select Delete from the menu to
delete a saved menu item.
]
Delete all:
In the added menu items, press the left
soft key [Options]. Select
Delete all
from the menu
to delete all the quick menu items except the default
items.
]
View info.:
In the added menu item list, press the
left soft key [Options].
Select View info. from the menu to view the information
about the actual location of the added menu item.
Alarm clock Menu 0.2
The alarm function allows you to set up multiple
separate alarms. You can also set the time, repetition
interval and alarm sound.
]Select your desired alarm to configure in the alarm
list. If there is no alarm, press the right soft key [Add]
to add a new alarm.
]
Set/Cancel alarm:
Select desired set time mode
using the navigation key.
]
Input alarm time:
Input your desired alarm time by
specifying hour and minute. If the time format is 12
hours-based format, you have to select either ‘am’ or
‘pm’ using the key.
]
Select repeat mode:
Select desired repeat mode
using the navigation key.
]
Select bell:
Select the bell to use for the alarm using
the navigation key.
]
Input memo:
Input alarm name.
73
Tools
When you have completed configuration, press the
key to save the changed alarm configuration.
Connectivity Menu 0.3
Bluetooth (Menu 0.3.1)
Paired devices
Select the Paired devices by pressing the OK key. This
function allows you to view the list of all devices that
are paired with your phone at once.
]
Adding a new device
1. Select the Add to search the device can be
connected in range.
2. If you want to stop the searching , press the right
soft key [Cancel].
3. All of the searched devices are displayed the
popup menu.
Select the desired device by pressing the OK key, and
input the password.
]
Assigning a short name:
Press the OK key, to
rename the paired device.
]
Connecting/Disconnecting the device
1. Select the Connect, allows you to active to the
bluetooth connection.
2. If you want to close the connection to the
selected device, select the Disconnect.
Bluetooth profiles are Headset profile, Handsfree
profile, Dial Up Networking Profile, Object Push Profile
and Serial Port Profile.
• Please use a headset that conforms to handsfree,
headset profile authentication.
]
Deleting devices:
Select Yes to delete the selected
device.
]
Deleting all the devices:
Select Yes to delete all
the devices in the list.
Note
]
Alarm function works even if the phone is turned
off.
Note
]
This options is appeared when the device
connected with your phone is the headset.
Tools
74
Tools
Settings
This menu allows you to configure the profile for a
bluetooth.
]
Bluetooth usage:
Set on or off the bluetooth using
the left/right navigation key.
]
My handset's visibility:
1. Select the Shown to all, shows your phone to
other bluetooth devices.
2. Select the Hidden, shows your phone only to the
paired device.
]
My Handset's name:
Allows to you change the
handset's name can be seen by other bluetooth
devices.
Dial-up network (Menu 0.3.2)
You can use your phone with a variety of PC
connectivity and data communications applications.
Select USB and Bluetooth you want to use for the data
connection.
Calculator Menu 0.4
The calculator function allows you to add, subtract,
multiply and divide. You can input numbers using the
number keys, and operators using the up, down, left,
and right navigation key.
You can input a decimal point by pressing the
key.
Whenever you press the key, characters are
sequentially deleted in reverse direction.
World time Menu 0.5
The World time function provides time information on
major cities worldwide.
1. You can view the time of desired country or city
using the navigation or [List].
2. You can select a desired city as a base using the
right soft key [set].
75
Tools
Unit converter Menu 0.6
This function converts any measurement into a unit
you want.
There are 7 types of units that can be converted:
Currency, Surface, Length, Weight, Temperature,
Volume, and Velocity.
Currency (Menu 0.6.1)
1. Select the Currency menu.
2. Users can set a currency exchange rate using the
right soft key [Rate].
3. Input standard unit to view converted value.
4. You can view the value in home country currency
unit in Domestic by inputting standard unit in
Foreign.
5. Press the right soft key [Reset] to clear the current
input field, and locate the cursor in the input field.
6. To exit currency conversion function, press the
key.
Surface (Menu 0.6.2)
1. Select Surface menu.
2. Select desired unit to convert using the key [Unit].
3. Input standard unit to view converted value.
4. Press the right soft key [Reset] to clear the current
input field, and locate the cursor in the input field.
5. To exit area conversion function, press the
key.
Length (Menu 0.6.3)
1. Select Length menu.
2. Select the desired unit to convert using the key
[Unit].
3. Input the standard unit to view converted value.
4. Press the right soft key [Reset] to clear the current
input field, and locate the cursor in the input field.
5. To exit length conversion function, press the
key.
Note
]
You can input a decimal number by pressing the
key.
Tools
76
Tools
Weight (Menu 0.6.4)
1. Select Weight menu.
2. Select desired unit to convert using the key
[Unit].
3. Input the standard unit to view converted value.
4. Press the right soft key [Reset] to clear the current
input field, and locate the cursor in the input field.
5. To exit weight conversion function, press the
key.
Temperature (Menu 0.6.5)
1. Select Temperature menu.
2. Input the standard unit to view converted value.
3. Press the right soft key [Reset] to clear the current
input field, and locate the cursor in the input field.
4. To exit temperature conversion function, press the
key.
Volume (Menu 0.6.6)
1. Select Volume menu.
2. Select desired unit to convert using the key
[Unit].
3. Input the standard unit to view converted value.
4. Press the right soft key [Reset] to clear the current
input field, and locate the cursor in the input field.
5. To exit volume conversion function, press the
key.
Velocity (Menu 0.6.7)
1. Select Velocity menu.
2. Select desired unit to convert using the key
[Unit].
3. Input the standard unit to view converted value.
4. Press the right soft key [Reset] to clear the current
input field, and locate the cursor in the input field.
5. To exit velocity conversion function, press the
key.
Organiser & Tools [Menu *]
77
Organiser & Tools
Calendar Menu *.1
Schedule inquiry and search
1.
Reference by Months
You can refer to your schedule by months. The
cursor is on the current date, and the registered
date is marked.
The schedule saved for the date where the cursor is
located is represented by an icon.
Pressing the shortcut key moves to the
previous year and pressing move to the next
year and pressing moves to today. Pressing
moves to the previous month, and
moves to the next month. Pressing moves to
the weekly calendar, and moves to the
monthly calendar. You can move the date using .
2.
Reference by Days
Pressing in the reference by month moves to
reference by day where you can refer to your
schedule by days. You can refer to the moving date
tab using . As a search result, brief schedule
contents, repetition set up configuration, and alarm
set up configuration are displayed. You can send the
schedule to another phone or an Internet site
through SMS(Text message) or MMS(Picture
message) or Email or Bluetooth.
3.
Detailed reference
You can refer to a detailed schedule, that is the
whole contents of the schedule configured by the
user. You can send the schedule to another phone
or an Internet site through SMS(Text message) or
MMS(Picture message) or Email or Bluetooth using
the left soft key [Options].
Search schedule
You can add a schedule. You can configure the start
date, end date, start time, end time, contents, type of
schedule, repetition, alarm of the schedule.
]
Schedule types:
Appointment, Anniversary,
Birthday, Others
]
Configurable repetition options:
Once, Daily,
Weekly, Monthly, Annually, User setting
]
Configurable alarm options:
No alarm, On time,
15 mins before, 30 mins before, 1 hour before, 1
day before, 3 days before, 1 week before
Organiser & Tools
78
Organiser & Tools
Delete schedule
1.
Delete elapsed schedules
You can delete all elapsed schedules using this
function.
2.
Delete all
You can delete all saved schedule contents using
this function.
Set up and release holiday
You can set up or release user holidays. Press the left
soft key [Options] and select
Set holiday
. The
selected date will be displayed in red.
To release the holiday, press the left soft key [Options]
and select
Reset holiday
.
Schedule notification
If the user has configured the alarm setting, the
specified alarm sound will ring. If the notification time
is before the schedule start time, you can set up the
alarm again.
To do Menu *.2
You can view, edit and add tasks to do. Tasks are
displayed in time order. Tasks that have been
completed or not completed are displayed in different
ways.
Add
To add a task, press the right soft key [Add] in the
Tasks list management screen. Then input the date,
description and priority for the task.
When you have finished entering the data, press the
right soft key [Done] to save the new task.
Detailed view and Edit
To view detailed task contents, locate the cursor on the
desired item in the Tasks list, and then press . You
can edit and delete a task using the left soft key
[Options]. You can also delete multiple or all tasks at
once using the
Mark
/
Unmark
option.
Set job status
Tasks set as finished are displayed as crossed out
below the unfinished tasks in the Tasks list. You can set
Finished tasks to Not finished by selecting
Option
.
79
Organiser & Tools
Memo Menu *.3
Using the memo management function, you can view
and manage saved memo contents, and add new
memo.
Add memo
To add a new memo, press the right soft key [Add].
Enter the contents of the memo. You can save the
memo to the list by pressing the right soft key [Done].
Edit and delete memo
Highlight the desired memo and press to view its
contents. You can edit or delete the contents of a
memo using the left soft key [Options]. You can return
to the memo management screen by pressing .
You can select Multiple or All memos using the
Mark/Unmark option and then delete a memo by
pressing the right soft key [Delete].
Secret memo Menu *.4
To add, view or delete a secret memo, you need to
input the security code.
Date finder Menu *.5
The date finder shows the number of remaining days
while changing the day.
Dateulator Menu *.6
]
Dateulator enquiry
1. Select the Organiser from the top menu.
2. Select the Dateulator item and press the OK key.
3. The saved Dateulator list is displayed.
]
Adding Dateulator items
1. To add a new Dateulator item, select Add new
using the left soft key [Options] in the Dateulator
enquiry screen or select right soft key [Add].
2. Input the Date, and notes when you add an item.
3. Press the right soft key [Done] to save the item.
]
Mark/Unmark
1. You can Mark/Unmark desired (all) item(s) from
the list.
2. By this option you can delete marked items.
Organiser & Tools
80
Organiser & Tools
]
Dateulator Delete:
Select the desired item(s) to
delete from the Dateulator list and press the Delete
using the left soft key [Options] to delete the
Dateulator item.
]
Dateulator Detailed View:
To view detailed
information, select the desired item from the
Dateulator list and press OK key to display the
detailed view screen about the item.
]
Show home screen/ Do not show home screen:
By setting Show home screen, you can see the
Remaining days for this item (D-Day) on Idle screen
top left corner.
Settings Menu *.7
Calendar
You can change Calendar Default view and Week start
time to desired options. Press right soft key [Done] to
save settings in phone.
Memory info.
Allows you to view each memory status of the
organiser menu.
Clear all
Allows you to delete all the saved items, you need to
input the security code.
Calling [Menu #]
81
Calling
Video calls Menu #.1
You can set the screen display when making /receiving
a video call.
]
My picture size:
Select your picture size to be
displayed.
]
My picture position:
Select the position where
your image will be displayed.
]
Hide my picture:
Determine whether to show your
picture or not.
]
Mirror:
Select to activate the mirror effect or not.
- On:
Displays the image flipped side to side.
- Off:
Displays the image as it is.
]
Substitute picture:
Select a still image to be
displayed as the substitute picture.
Call history Menu #.2
You can check the record of missed, received, and
dialled calls only if the network supports Calling Line
Identification (CLI) within the service area.
The number and name (if available) are displayed
together with the date and time at which the call was
made. You can also view call times.
Missed calls (Menu #.2.1)
Allows you to view missed call records, make a call,
send a message, and save the number in Contacts.
Received calls (Menu #.2.2)
Allows you to view received call records, make a call,
send a message, and save the number in Contacts.
Dialled calls (Menu #.2.3)
Allows you to view dialled call records, make a call,
send a message, and save the number in Contacts.
All calls (Menu #.2.4)
Allows you to view the missed, received, and dialled call
records. You can make a call, or send a message to the
number you have selected from the records. You can
also save the number in Contacts.
Calling
82
Calling
Call duration Menu #.3
You can view call time by types. Press the left soft key
[Options] to choose either partial initialisation or
entire initialisation. Also press right soft key [Clear] to
initialise a selected duration type. Initialization will
require your Security code.
The following timers are available:
]
Last call:
Shows the latest call time in units of
hours/minutes/seconds.
]
Received calls:
Shows incoming call time.
]
Dialled calls:
Shows outgoing call time.
]
All calls:
Shows total call time.
Call costs Menu #.4
1. This function displays the call costs of the Last call
and All calls.
2. To initialise, press the right soft key [Clear] and
enter the PIN2 code.
3. You can select either
Unit
or
Currency
in
Set call
cost
. According to your setting, the call cost is
displayed during a call (If USIM and Network
support Advice Of Charge(AOC)).
4. In the
Set limit
configuration, select
On
to
configure the cost limit. When a cost limit is
configured, and the call costs reach the limit, making
a call will not be allowed.
Call divert Menu #.5
Call divert menus for voice and video calls are
provided.
The menu consists of Voice calls, Video calls and
Deactivate all.
Voice calls
All voice calls
If busy
If no answer
If unreachable
1. When the Deactivate menu is selected
Deletes Call Divert Number registered to the
network. While waiting for the result from the
network, Requesting message and animation
appears. When the network answers, the result of
the operation is displayed.
83
Calling
2. When To a number is selected
A dialogue window appears allowing you to enter a
phone number to divert to. Input a phone number
to divert calls to, and press . While waiting the
result from the network, Requesting message and
animation appears. When the network answers, the
result of the operation is displayed.
3. When Recent divert number list is selected
Divert registration is performed with the selected
number. Select the number, and press . While
waiting for the result from the network, a
Requesting message and animation appears. When
the network answers, the result of the operation is
displayed.
4. Options menu
After activating All voice calls menu, selecting the
Options menu at the bottom of the menus displays
the Deactivate, Activate, Deactivate all, View status
and clear list menus.
Activate: Move to Settings menu to activate call
divert.
The View status menu shows the settings on the
network. If you select this menu, Requesting.
message and animation appear. Then the network
settings are displayed when the information is
received from the network. Selecting Status in the
right soft menu gives the same result. If you select
the Deactivate menu, the call divert numbers
registered in the network are deleted after user
confirmation.
Selecting the Deactivate all menu will display the
operation result after showing the Requesting
message and animation. Clear list menu will delete
all divert number list.
Video calls
All video calls
1. When the Deactivate menu is selected
Deletes Call Divert Number registered to the
network. While waiting for the result from the
network, Requesting message and animation
appears. When the network answers, the result of
the operation is displayed.
2. When To a number is selected
A dialogue window appears allowing you to enter a
phone number to divert to. Input a phone number
to divert calls to, and press . While awaiting the
result from the network, Requesting message and
animation appears. When the network answers, the
result of the operation is displayed.
Calling
84
Calling
3. When Recent divert number list is selected
Divert registration is performed with the selected
number. Select the number, and press . While
waiting for the result from the network, a
Requesting message and animation appears. When
the network answers, the result of the operation is
displayed.
4. Options menu
After activating the All video calls menu, selecting
the Options menu at the bottom of the menus
displays the Deactivate, Activate, Deactivate all,
View status and clear list menus.
Activate: Move to Settings menu (above1-4) to
activate call divert. The View status menu shows the
settings on the network. If you select this menu,
Requesting. Message and animation appear. Then
the network settings are displayed when the
information is received from the network. Selecting
Status in the right soft menu gives the same result.
If you select the Deactivate menu, the call divert
numbers registered in the network are deleted after
user confirmation. Selecting the Deactivate all menu
will display the operation result after showing the
Requesting message and animation. Clear list menu
will delete all divert number list.
If busy
1. When the Deactivate menu is selected
It operates the same as All voice calls menu.
2. When To a number is selected
It operates the same as All voice calls menu.
3. When Recent divert number list is selected
It operates the same as All voice calls menu.
4. When Options menu is selected
It activates and operates If busy menu. It operates
the same as All voice calls menu.
If no answer
1. When the Deactivate menu is selected
It operates the same as All voice calls menu.
2. When To a number is selected
It operates the same as All voice calls menu.
3. When Recent divert number list is selected
It operates the same as All voice calls menu.
4. When Options menu is selected
Activates and operates No answer menu. It operates
the same as All voice calls menu except that users
can configure delay time in the Set waiting time
menu in the menu list.
85
Calling
If unreachable
1. When Deactivate menu is selected
It operates the same as All voice calls menu.
2. When To a number is selected
It operates the same as All voice calls menu.
3. When Recent divert number list is selected
It operates the same as All voice calls menu.
4. When Options menu is selected
Activates and operates If out of reach menu. It
operates the same as All voice calls menu.
Call barring Menu #.6
Call barring menus for Voice and Video calls are
provided.
The menu consists of
Voice calls
,
Video calls
and
Deactivate all
. The Voice calls and Video calls menus
have the following submenus.
The
Call barring
menu consists of
All outgoing
,
Outgoing international
,
Outgoing international
calls except home country
,
All incoming
and
Incoming when abroad
submenus.
The
All outgoing
menu bars dialling all outgoing calls,
the
Outgoing international
menu bars dialling
outgoing international calls, and the
Outgoing
international calls except home country
menu bars
dialling outgoing international calls except for the
Home PLMN country.
All incoming
rejects all
incoming calls and the
Incoming when abroad
menu
rejects incoming calls when roaming.
Voice calls
Video calls
All outgoing
1. When is selected, it receives the Barring
password from user, and activates the barring service
on the network. A requesting message and
animation appears. When the network answers, the
result of the operation is displayed.
2. When the Options menu is selected, it activates the
Outgoing calls menu. Select the Options menu from
the soft menus on the lowest menu. Then
Deactivate
,
Activate
,
Deactivate all
,
View status
and
Barring password
menus appear. Select the
Activate
menu to receive the Barring password from
the user and activate the barring service on the
network.
Calling
86
Calling
The
Deactivate
menu deactivates the barring
service after the user's Barring password is entered.
The
Deactivate all
menu deactivates all barring
services configured in the network after the user's
Barring password has been entered. The
View
status
menu enables users to view the current
network configuration. Selecting
View status
menu
displays the Requesting message with animation and
the result of the operation when the network
answers.
Barring password
menu enables users to
change the current barring password.
Outgoing international
1. When is selected, it operates in the same way as
the
Outgoing calls
menu.
2. When the Options menu is selected, it activates and
operates the International calls menu. It operates in
the same way as the
Outgoing calls
menu.
Outgoing international calls except home country
1. When is selected, it operates in the same way as
the
Outgoing calls
menu.
2. When the Options menu is selected – It activates
and operates the
International except home
country
menu. It operates in the same way as the
Outgoing calls
menu.
All incoming
1. When is selected, it operates in the same way as
the
Outgoing calls
menu.
2. When the Options menu is selected, it activates and
operates the Incoming calls menu. It operates in the
same way as the
Outgoing calls
menu.
Incoming when abroad
1. When is selected, it operates in the same way as
the
Outgoing calls
menu.
2. When the Options menu is selected, it activates and
operates the Incoming calls when abroad menu. It
operates in the same way as the
Outgoing calls
menu.
87
Calling
Fixed dial numbers Menu #.7
]
FDN ON/OFF:
Select whether to activate FDN or
not. PIN authentication is required.
]
FDN list:
Displays the current FDN list. You can
edit, add, or delete fixed dial numbers. PIN2
authentication is required to edit the list. And the
configuration information is saved on the USIM. The
information saved on the USIM is used when FDN
restricts outgoing calls.
Call waiting Menu #.8
]
Activate:
Activates waiting service.
Selecting this item, displays requesting message and
animation. When the network answers, the result of
the operation is displayed.
]
Deactivate:
Deactivates Call waiting service.
Selecting this item displays requesting message and
animation. When the network answers, the result of
the operation is displayed.
]
View status:
Displays activated Call waiting service
group item of the network. Selecting this item
displays requesting message and animation. When
the network answers, the result of the operation is
displayed.
Settings Menu #.9
Call reject (Menu #.9.1)
You can set whether to reject incoming calls.
1. Select
On
in Reject menu to activate call reject. The
Reject list menu appears.
2. Set the desired call reject option in the Reject list
menu.
]
All calls:
Rejects all calls.
]
Contacts:
Rejects the calls from the number stored
in Contacts.
]
Groups:
You can specify call rejects by group units
stored in Contacts.
]
Unregistered:
Rejects calls from the number not
stored in Contacts.
Calling
88
Calling
Send my number (Menu #.9.2)
]
Set by network:
Configures with the default
settings determined by the service provider.
]
On:
Configures to send my phone number when
making an outgoing call.
]
Off:
Configures not to send my phone number when
making an outgoing call.
Auto redial (Menu #.9.3)
Allows you to set the auto redial function when a call
attempt has failed.
Answer mode (Menu #.9.4)
Allows you to set the answering method. You can
choose between Press send key and Press any key.
Minute minder (Menu #.9.5)
Determines whether to sound a 1 minute tone every 1
minute when you are on the phone.
BT answer mode (Menu #.9.6)
]
Hands-free:
You can answer a call using the
Bluetooth headset, when the Bluetooth is connected.
]
Handset:
If you press the send key on the handset
to answer a call, you can talk on the handset. If you
press the Bluetooth headset key to answer a call, you
can talk using the Bluetooth headset.
This is the initial answer mode selection. And while
talking, you can switch from handset to headset or
from headset to handset.
Accessories
89
Accessories
Travel Adapter
This charger allows you to
charge the battery while away
from home or your office.
Standard Battery
Data cable/CD
You can connect your phone
to PC to exchange the data
between them.
Hands free ear-microphone
and music player controller
combo
Stereo headset
Controller:
Answer & End key,
music player control, volume
control, Hold button and microphone.
After connecting the headset and the controller, plug
the end of controller into the headset jack on the right
side of the phone.
There are various accessories for your mobile phone. You can select these options according to your personal
communication requirements.
Note
]Always use genuine LG accessories.
]Failure to do so may invalidate your warranty.
]Accessories may vary in different regions: please
check with our regional service company or agent
for further information.