LG Electronics USA L1753SS LCD Monitor User Manual Lx19SP ENG

Download:
Mirror Download [FCC.gov]
Document ID	753217
Application ID	xnJjwSMClM+B/mUukf6xDA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.9kB (836279 bits)
Date Submitted	2007-01-31 00:00:00
Date Available	2007-01-31 00:00:00
Creation Date	2006-09-08 04:43:05
Producing Software	ezPDFGate with Acrobat Distiller
Document Lastmod	2007-01-12 13:33:52
Document Title	Lx19SP-ENG
Document Creator	QuarkXPress3.3: LaserWriter 8 KH-8.7.1
Document Author:	//

User’s Guide
L1719S/L1719SP
L1919S/L1919SP
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Important Precautions
NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.
NOTE
This epuipment has been tested and found to comply with the limits for a class
B digital device,pursuant to part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.This equipment generates,uses and can radiate radio frequency
energy and,if not installed and used in accordance with the instructions,may
cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Body into the product in the correct direction as shown in the picture.
Make sure you push it until you hear it “click”.
REAR
Stand Body
3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
4. Once assembled take the monitor up carefully and face the front side
Stand Base
REAR
Stand Body
REAR
FRO
NT
REAR
FRO
NT
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
A3
Connecting the Display
To remove the Stand:
1. Put a cushion or soft cloth on a flat surface. 2.
Place the monitor face down on
the cushion or soft cloth.
The Head part
The Stand
base part
3. Hold the product as it follows and lift up the Stand slightly.
4. Change your hold on the product as it follows and turn the Stand Base in the arrow
direction until you hear a "click."
5.
Pull out the Stand to remove.
A4
Connecting the Display
To remove the Stand Base:
Type. A
1. Ensure there are four latches at the
2. Hold the body of the Stand as it follows.
bottom of the Stand Base.
3. Press the four latches individually
toward each end as shown.
4. Pull up the body of the Stand while 5. The body of the Stand and the Stand
holding the Stand Base with the other
hand.
Base are successfully separated.
A5
Connecting the Display
To remove the Stand Base:
Type. B
1. Ensure there are two latches at the 2.Hold the body of the Stand as it follows.
bottom of the Stand Base.
3. Press the two latches individually toward each end as shown
4. Pull up the body of the Stand while 5.
holding the Stand Base with the other
hand.
A6
The body of the Stand and the
Stand Base are successfully
separated.
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚
20
Warning: When adjusting the angle of the screen, do not
put your finger(s) in between the head of the
monitor and the stand body. You can hurt your
finger(s).
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
A7
Connecting the Display
Using the Computer
1. Place the monitor in a convenient, well-ventilated location near your computer.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection. 1
3. Connect the power cord into a proper power outlet that is easily accessible and close to
the display. 2
Power Cord Signal Cable
Varies according to model.
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
Wall-outlet type
PC-outlet type
PC
MAC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
4. Press
button on the side switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the ‘AUTO/SET’ button on the side panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.
A8
Control Panel Functions
Side
Front Panel Controls
Control
Function
MENU Button
Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
Buttons
Use these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A16.
A9
Control Panel Functions
Control
AUTO/SET
Button
Function
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
17 inch monitor : 1280 x 1024
19 inch monitor : 1280 x 1024
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up green or blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the or Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the
/ Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button once to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A11
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
PICTURE
Sub menu
Reference
To adjust the brightness,
contrast and gamma of the
screen
BRIGHTNESS
CONTRAST
GAMMA
COLOR
sRGB
To customize the color of the
screen
PRESET 6500K
9300K
RED
GREEN
BLUE
POSITION
HORIZONTAL
To adjust the position of the
screen
VERTICAL
TRACKING CLOCK
PHASE
To improve the clarity and
stability, sharpness of the
screen
SHARPNESS
SETUP
LANGUAGE
OSD
To customize the screen
status for a user's operating
environment
HORIZONTAL
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
FLATRON
F-ENGINE
MOVIE / TEXT
To select or customize
desired image settings
USER
NORMAL
: Adjustable
NOTE
The order of icons may differ depending on the model (A12~A16).
A12
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
PICTURE
Sub-menus
Icons
Button Tip
MENU
: Exit
: Adjust (Decrease/Increase)
SET
: Enter
: Select another sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A13
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
PICTURE
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
COLOR
PRESET
• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
Set your own green color levels.
GREEN
MENU : Exit
: Decrease
BLUE
: Increase
SET : Select another sub-menu
Set your own blue color levels.
POSITION
POSITION
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
A14
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
: Increase
SHARPNESS To adjust the clearness of the screen.
SET : Select another sub-menu
SETUP
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
SETUP
SETUP
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menu
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the
button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
A15
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
right side of the monitor.
button on the
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when applied
Screen when not applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
Main menu
Sub menu
Description
MOVIE This feature lets you easily select the best desired
TEXT image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation images in videos or movies
TEXT: For text images (Word processing etc.)
USER
To adjust the USER sub-menu function,
Press the SET Button
USER
BRIGHTNESS
User
You can manually adjust brightness, ACE or RCM.
You can save or restore the adjusted value even
when using a different envir
... (Brightness): Adjusts screen brightness.
...ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
...RCM(Real Color Management): Selects the color mode.
ACE
RCM
Not applied
Green enhance
Flesh tone
Color Enhance
SAVE
Select the SAVE sub-menu using the SET button
and save the YES value using the buttons.
NORMAL This is under normal operating conditions.
A16
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power indicator
light on?
• Press the Power button.
● Is the power on and the • Adjust the brightness and the contrast.
power indicator blue or
green?
● Is the power indicator
amber?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
A17
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
• Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
• Make sure the power voltage is high enough, It
has to be higher than AC100-240V 50/60Hz.
A18
Troubleshooting
Have you installed the display driver?
● Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
● Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Make sure to check if the video card supports
Plug&Play function.
A19
Specifications
17 inch
Display
17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
17 inches viewable
0.264 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate TTL,
SOG (Sync On Green)
15 pin D-Sub Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
Resolution
Max
Recommend
VESA 1280 x 1024 @75 Hz
VESA 1280 x 1024 @60 Hz
Plug&Play
DDC 2B
Power
Consumption
0n Mode
Sleep Mode
Off Mode
Dimensions
& Weight
Tilt Range
Power Input
Width
Height
Depth
Net
≤
≤
30 W(Typ.)
1W
1W
With Stand
Without Stand
36.40 cm / 14.33 inches 36.40 cm / 14.33 inches
37.80 cm / 14.88 inches 30.80 cm / 12.13 inches
18.00 cm / 7.09 inches
6.00 cm / 2.36 inches
3.35 kg (7.39 lbs)
Tilt
-5˚~20˚
AC 100-240V~ 50/60Hz 0.8A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Signal cable
Power cord
Attached(
), Detached ( O )
Attached(
), Detached ( O )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A20
Specifications
19 inch
Display
19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.294 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate TTL,
SOG (Sync On Green)
15 pin D-Sub Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
Resolution
Max
Recommend
VESA 1280 x 1024 @75 Hz
VESA 1280 x 1024 @60 Hz
Plug&Play
DDC 2B
Power
Consumption
0n Mode
Sleep Mode
Off Mode
Dimensions
&Weight
Tilt Range
Power Input
Width
Height
Depth
Net
≤
≤
34 W(Typ.)
1W
1W
With Stand
Without Stand
41.80 cm / 16.46 inches 41.80 cm / 16.46 inches
41.27 cm / 16.25 inches 34.30 cm / 13.50 inches
18.02 cm / 7.09 inches
5.92 cm / 2.33 inches
4 kg (8.82 lbs)
Tilt
-5˚~20˚
AC 100-240V~ 50/60Hz 0.8A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Signal cable
Power cord
Attached(
), Detached ( O )
Attached(
), Detached ( O )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A21
Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
10
11
*12
13
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
Horizontal Freq. (kHz)
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
Vertical Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
* Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
Green or blue
Amber
Off
A22
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1. Put a cushion or soft cloth on a flat surface. 2.
Place the monitor face down on
the cushion or soft cloth.
The Head part
The Stand
base part
3. Hold the product as it follows and lift up the Stand slightly.
4. Change your hold on the product as it follows and turn the Stand Base in the arrow
direction until you hear a "click."
5.
Pull out the Stand to remove.
A23
Installing the Wall mount plate
6.
Installing the wall mount plate
Wall mount plate(Separate purchase)
This is stnad-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate is
purchased.
Kensington Security Slot
Connected to a locking
cable that can be purchased
separately at most
computer stores
A24
Digitally yours

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : ezPDFGate with Acrobat Distiller
Create Date                     : 2006:09:08 04:43:05Z
Modify Date                     : 2007:01:12 13:33:52+08:00
Metadata Date                   : 2007:01:12 13:33:52+08:00
Creator Tool                    : QuarkXPress3.3: LaserWriter 8 KH-8.7.1
Format                          : application/pdf
Creator                         : //
Title                           : Lx19SP-ENG
Document ID                     : uuid:52614ff2-a377-4fef-9a7c-9219486c9605
Instance ID                     : uuid:05d1fa3b-76e1-4c34-a871-eb60aaaa9d41
Has XFA                         : No
Page Count                      : 27
Page Layout                     : OneColumn
Author                          : //

EXIF Metadata provided by EXIF.tools