LG Electronics USA L2300BN 23" LCD MONITOR User Manual User s Manual H ok

LG Electronics USA 23" LCD MONITOR User s Manual H ok

USERS MANUAL

EUT Type: 23” LCD Monitor FCC ID: BEJL2300BN Test Report No.: GETEC-E3-05-088 FCC Class B Certification APPENDIX H : USER’S MANUAL
Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference.See the label attached on the back cover and quote this information to yourdealer when you require service.L2300BL2300CUser’s Guide
A1This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential eletrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, use, and servicing.On SafetyUse only the power cord supplied with the unit. In case you use another powercord, make sure that it is certified by the applicable national standards if not beingprovided by the supplier. If the power cable is faulty in any way, please contact themanufacturer or the nearest authorized repair service provider for a replacement.The power supply cord is used as the main disconnection device. Ensure that thesocket-outlet is easily accessible after installation.Operate the display only from a power source indicated in the specifications ofthis manual or listed on the display. If you are not sure what type of power supplyyou have in your home, consult with your dealer.Overloaded AC outlets and extension cords are dangerous. So are frayed powercords and broken plugs. They may result in a shock or fire hazard. Call your servicetechnician for replacement.Do not Open the Display.There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is off. Contact your dealer if the display is not operating properly.To Avoid Personal Injury :Do not place the display on a sloping shelf unless properly secured.Use only a stand recommended by the manufacturer.To Prevent Fire or Hazards:Always turn the display OFF if you leave the room for more than a short periodof time. Never leave the display ON when leaving the house.Keep children from dropping or pushing objects into the display's cabinetopenings. Some internal parts carry hazardous voltages.Do not add accessories that have not been designed for this display.During a lightning storm or when the display is to be left unattended for anextended period of time, unplug it from the wall outlet.Important Precautions
A2Important PrecautionsOn InstallationDo not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage.Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings are blocked, built-up heatcan cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.Place the display in a built-in enclosure unless proper ventilation is provided.Cover the openings with cloth or other material.Place the display near or over a radiator or heat source.Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,mar, or damage the Active Matrix LCD permanently.Do not press the LCD screen with your finger for a long time as this may causesome afterimages.Some dot defects may appear as Red, Green or Blue spots on the screen.However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality foryour LCD display. If used under any mode except the recommended resolution,some scaled or processed images may appear on the screen. However, this ischaracteristic of the fixed-resolution LCD panel.On CleaningUnplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the displayscreen because over-spraying may cause electrical shock.On RepackingDo not throw away the carton and packing materials. They make an idealcontainer in which to transport the unit. When shipping the unit to anotherlocation, repack it in its original material.On DisposalThe fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regulations ofyour local authority.
Connecting the DisplayA3Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -5˚~30˚ Swivel : 90˚ErgonomicIt is recommended that in order to maintain an ergonomic and comfortable viewingposition, the forward tilt angle of the monitor should not exceed 5 degrees.Height Range : maximun 3.15 inch (80.0mm)80.0mmUnfasten the [Stand lock]clockwise to adjust theheight of the stand.
A4Connecting the DisplayUsing the Computer1. Place the monitor in a convenient, well-ventilated location near your computer.To adjust height of your monitor, unlock the stand lock on top of the stand.2. Connect the signal cable. When attached, tighten the thumbscrews to securethe connection. 3. Connect the power cord into a proper power outlet that is easily accessible and close to the display.PUSHWall-outlet type*PC-outlet type*MACPCPower Cord Signal Cable* Varies according to model.12Mac adapterFor Apple Macintosh use,a separate plug adapter isneeded to change the15 pin high density (3 row)D-sub VGA connector onthesupplied cable to a 15 pin2 row connector.NOTE This is a simplified representation of the rear view.This rear view represents a general model; your display may differ from the view as shown.Analog signalD-sub*Digital signalDVI-D*RS-232C*OUTINWhen connecting DVI-D signal cableWhen connecting D-SUB signal cable
Connecting the DisplayA5To arrange cables in order1. Press the pushbutton, and pull the stand cover down to separate it from the stand.2. After connecting cables, put the stand cover correctly into the holes on the stand. If securely connected, you can hear the click sound from the latch. PUSHStand coverPush button
A6Control Panel FunctionsFront Panel ControlsButtonsUse these buttons to choose or adjust items in the On Screen Display.MENU ButtonUse this button to enter or exit the On Screen Display.Use this button to turn the display on or off.This Indicator lights up green when the displayoperates normally. If the display is in DPM (EnergySaving) mode, this indicator color changes to amber.Power ButtonPower (DPMS)IndicatorUse this button to enter a selection in the On Screen Display.AUTO/SELECTButtonControl Function
A7Control Panel FunctionsControl Direct Access FunctionBring up Contrast and Brightness adjustment. This function allows you to secure the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button and button for 5seconds: the message “CONTROLS LOCKED” appears.You can unlock the OSD controls at any time by pushingthe MENU button and button for 5 seconds:the message “CONTROLS UNLOCKED” will appear.Use this button to make DVI DIGITAL, DSUB ANALOG connectoractive. This feature is used when two computers are connected to thedisplay. The default setting is Dsub.• DVI DIGITAL• DSUB ANALOGSOURCE Selection:SOURCE 󰦞󰦞▼▲ 󰦞󰦞AUTO/SELECTWhen adjusting your display settings, always press theAUTO/SELECT button before entering the On ScreenDisplay(OSD). This will automatically adjust your displayimage to the ideal settings for the current screen resolutionsize (display mode).The best display mode is L2300B monitor : 1920x1200@60HzL2300C monitor : 1360x768@60HzAUTO adjustment functionCONTROLS LOCKED/UNLOCKED:MENU and
A8On Screen Display (OSD) Control AdjustmentScreen AdjustmentMaking adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. Ashort example is given below to familiarize you with the use of the controls.The following section is an outline of the available adjustments and selectionsyou can make using the OSD.To make adjustments in the On Screen Display, follow these steps:Press the MENU Button, then the main menu of the OSD appears.To access a control, use the or Buttons. When the icon you wantbecomes highlighted, press the AUTO/SELECT Button.Use the Buttons to adjust the item to the desired level.Accept the changes by pressing the AUTO/SELECT Button.Exit the OSD by pressing the MENU Button.NOTEAllow the display to stabilize for at least 30 minutes before making image adjustments.
A9On Screen Display(OSD) Selection and Adjustment To adjust the brightness andcontrast of the screenCONTRAST/BRIGHTNESSCOLORADJUSTMENTIMAGEPOSITIONTRACKINGSETUPOSD POSITIONMain menu Sub menu A D ReferenceThe following table indicates all the On Screen Display control, adjustment,and setting menus.USER(R/G/B)9300K6500KTo adjust the position of thescreen To customize the color of thescreenTo customize the screen statusfor a user's operating environmentTo adjust position of the OSDwindow on the screenTo improve the clarity andstability of the screen : AdjustableA : Analog InputD : Digital InputCONTRASTBRIGHTNESSH POSITIONV POSITIONAUTOCLOCKPHASELANGUAGEIMAGE SIZETRANSPARENCYZOOMSET IDHORIZONTALVERTICALNOTEThe order of icons may differ depending on the model (A9~A12).
A10On Screen Display(OSD) Selection and Adjustment NOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.OSD Adjust DescriptionBRIGHTNESSTo adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen.Vertical PositionTo move image up and down.Horizontal PositionTo move image left and right.To adjust the brightness and contrast of the screenTo adjust the position of the screen OSD Adjust DescriptionTo customize the color of the screenOSD Adjust DescriptionUSER9300K6500KRED/GREEN/BLUESet your own color levels.Select the screen color. • 9300K: Slightly bluish white.• 6500K: Slightly reddish white.
A11On Screen Display(OSD) Selection and Adjustment To improve the clarity and stability of the screenOSD Adjust DescriptionThis function is suitable for analog signal inputonly. This button is for the automaticadjustment of the screen position, clock andphase. To minimize any vertical bars or stripes visibleon the screen background.The horizontalscreen size will also change.To adjust the focus of the display. This itemallows you to remove any horizontal noise andclear or sharpen the image of characters.Phase adjustment should be done afteradjusting the Clock.AUTOCLOCKPHASETo customize the screen status for a user's operating environmentOSD Adjust DescriptionTo choose the language in which thecontrol names are displayed.This function displays the image in itsoriginal size or enlarged size so as to fit inthe full screen of the LCD panel.To adjust the transparency of the OSDmenu screen.To adjust horizontal and vertical image sizesimultaneously.If you want to move the zooming point, usethe H/V POSITION function in the sub-menu. However, if the monitor turns offwhen zooming in and out the screen, themonitor will be returned to original screen.You can assign a unique SET ID NO (nameassignment) to each monitor when severalmonitors are connected for display. Specifythe number (0 ~ 99) using the buttonand exit. Use the assigned SET ID toindividually control each monitor using theMonitor Control Program.LANGUAGEIMAGE SIZETRANSPARENCYZOOMSET ID
A12To adjust position of the OSD window on the screenOSD Adjust DescriptionHorizontal PositionTo adjust horizontal position of the OSD window on thescreen.Vertical PositionTo adjust vertical position of the OSD window on thescreen.On Screen Display(OSD) Selection and Adjustment
A13Connecting the cableConnect the RS-232C cable as shown in the picture.* The RS-232C protocol is used for communication between the PC and monitor. You can turn the monitor on/off, select an input source or adjust the OSD menufrom your PC.▶Baud Rate : 9600bps▶Data Length : 8bits▶Parity Bit : NONE▶Stop Bit : 1bit▶Flow Control : NONEUse this method to connect several monitors to a single PC.You can control several monitors at a time by connecting them to a single PC. Communication ParameterRS-232C Cable(not included)MonitorPCControlling the Multiple Monitors
A14Command Reference List Controlling the Multiple MonitorsCOMMAND1 COMMAND2 DATA(Hexa) 01. Power k a 0, 1 02. Input Select k b 6, 803. Image Size (*L2300C) k c 1, 6Image Size (*L2300B) k c 2, 604. Contrast k g 0 - 6405. Brightness k h 0 - 6406. Key Lock k m 0, 107. Color k u 0, 2Transmission[Command1][Command2][ ][Set ID][ ][Data][Cr]* [Command 1]: First command.* [Command 2]: Second command.* [Set ID]: You can adjust the set ID to choose desired monitorID number in Setup menu. Adjustment range is 0~ 99. When selecting Set ID ‘0’, every connectedmonitor set is controlled. Set ID is indicated as decimal(0~99) on menu and as Hexa decimal (0x0~0x63)on transmission/receiving protocol.* [DATA]: To transmit command data.Transmit 'FF' data to read status of command.* [Cr]: Carriage ReturnASCII code ‘0x0D’* [ ]: ASCII code Space (0x20)’OK Acknowledgement[Command2][ ][Set ID][ ][OK][Data][x]* The Monitor transmits ACK (acknowledgement) based onthis format when receiving normal data. At this time, if thedata is data read mode, it indicates present status data. Ifthe data is data write mode, it returns the data of the PCcomputer.Error Acknowledgement[Command2][ ][Set ID][ ][NG][Data][x]* The Monitor transmits ACK (acknowledgement) based onthis format when receiving abnormal data from non-viablefunctions or communication errors.Data 1: Illegal Code2: Not supported function3: Wait more timeTransmission / Receiving Protocol
A15Controlling the Multiple MonitorsPower On (Command:a)▶To control Power On/Off of the monitor.Transmission[k][a][ ][Set ID][ ][Data][Cr]Data 0 : Power Off 1 : Power OnAcknowledgement[a][ ][Set ID][ ][OK][Data][x]▶To show Power On/Off.Transmission[k][a][ ][Set ID][ ][FF][Cr]Data 0 : Power Off 1 : Power OnAcknowledgement[a][ ][Set ID][ ][OK][Data][x]Input Select (Command:b) (Main Picture Input)▶To select input source for the monitor.You can also select an input source using the front panel controls on the monitor.Transmission[k][b][ ][Set ID][ ][Data][Cr]Data 6 : DSUB ANALOG8 : DVI DIGITALAcknowledgement[b][ ][Set ID][ ][OK][Data][x]Size(Command:c) ▶To adjust the screen format.You can also adjust the screen format in theSetup menu.Transmission[k][c][ ][Set ID][ ][Data][Cr]* L2300C - Data 1 : full * L2300B - Data 2 : full6 : (1 : 1) 6 : (1 : 1)Acknowledgement[c][ ][Set ID][ ][OK][Data][x]Transmission / Receiving Protocol
A16Transmission / Receiving ProtocolContrast (Command:g)▶To adjust screen contrast.You can also adjust contrast in the Contrast/Brightness menu.Transmission[k][g][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping’ as shown below.Acknowledgement[g][ ][Set ID][ ][OK][Data][x]* Real data mapping0 : Step 0A : Step 10 (SET ID 10)F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)64 : Step 100Brightness (Command:h)▶To adjust screen brightness.You can also adjust brightness in the Contrast/Brightness menu.Transmission[k][h][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping’ as shown below. Acknowledgement[h][ ][Set ID][ ][OK][Data][x]* Real data mapping 0 : Step 0A : Step 10 (SET ID 10)F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)64 : Step 100Controlling the Multiple Monitors●●... ... ... ... ... ...
Key Lock (Command:m)▶To lock the front panel controls on the monitor.Transmission[k][m][ ][Set ID][ ][Data][Cr]Data 0 : Lock off 1 : Lock onAcknowledgement[m][ ][Set ID][ ][OK][Data][x]→If you’re not using the front panel controls on the monitor,use this mode. Color (Command:U)▶To adjust the screen color.You can also adjust color in the Color adjustment menu.Transmission[k][u][ ][Set ID][ ][Data][Cr]Data 0 : 9300K2 : 6500KAcknowledgement[u][ ][Set ID][ ][OK][Data][x]A17Transmission / Receiving ProtocolControlling the Multiple Monitors
A18TroubleshootingNo image appearsCheck the following before calling for service.No image appears󰢹󰢹Is the power cord of thedisplay connected?󰢹󰢹Is the power indicatorlight on?󰢹󰢹Is the power on and thepower indicator green?󰢹󰢹Is the power indicatoramber?󰢹󰢹Do you see an "OUT OFRANGE" message onthe screen?󰢹󰢹Do you see a "CHECKSIGNAL CABLE"message on the screen?Do you see a "CONTROLS LOCKED" message on the screen.󰢹󰢹Do you see “CONTROLSLOCKED” when youpush MENU button?•You can secure the current control settings, sothat they cannot be inadvertently changed. Youcan unlock the OSD controls at any time bypushing the MENU button and button for 5seconds: the message “CONTROLSUNLOCKED” will appear.•Check and see if the power cord is connectedproperly to the power outlet.•Press the Power button.•Adjust the brightness and the contrast.•If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboardto bring up the screen.•Make sure if the power is on. •Try to turn on the PC.•This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.•This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.
A19TroubleshootingDisplay image is incorrect󰢹󰢹Display Position isincorrect.󰢹󰢹On the screenbackground, verticalbars or stripes arevisible.󰢹󰢹Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.󰢹󰢹The screen color ismono or abnormal.󰢹󰢹The screen blinks.•Press the AUTO/SELECT button toautomatically adjust your display image to theideal setting. If the results are unsatisfactory, adjust theimage position using the H position and Vposition icon in the on screen display.•Check Control Panel --> Display -->Settings and see if the frequency or theresolution were changed. If yes, readjust thevideo card to the recommend resolution.•Press the AUTO/SELECT button toautomatically adjust your display image to theideal setting.If the results are unsatisfactory, decrease thevertical bars or stripes using the CLOCK iconin the on screen display.•Press the AUTO/SELECT button toautomatically adjust your display image to theideal setting.If the results are unsatisfactory, decrease thehorizontal bars using the PHASE icon in theon screen display.•Check Control Panel --> Display -->Settings and adjust the display to therecommended resolution or adjust the displayimage to the ideal setting. Set the color settinghigher than 24 bits (true color).•Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.•Make sure the video card is properly insertedin the slot.•Set the color setting higher than 24 bits (truecolor) at Control Panel - Settings.•Check if the screen is set to interlace modeand if yes, change it to the recommendresolution.•Make sure the power voltage is high enough, Ithas to be hgher than AC100-240V 50/60Hz.
A20TroubleshootingHave you installed the display driver?󰢹󰢹Have you installed thedisplay driver?󰢹󰢹Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message?•Be sure to install the display driver from thedisplay driver CD (or diskette) that comes withyour display. Or, you can also download thedriver from our web site: http://www.lge.com.•Make sure to check if the video card supportsPlug&Play function.“IMAGE SIZE” function on OSD menu does not work. •[L2300B]Check if the resolution is set as 1920x1200 or lessthan 512x360. The optimal resolution is 1920x1200 and theimage is fully displayed on the monitor and is notconverted as 1:1 image size. If the resolution isless than 512x360, the image size is smaller thanthat of the OSD’s and is also not converted as 1:1image size.󰢹󰢹“IMAGE SIZE” functionon OSD menu does notwork?•[L2300C]Check if the resolution is set as 1360 x768 or less than 512x360. The optimal resolution is 1360 x768 and the imageis fully displayed on the monitor and is notconverted as 1:1 image size. If the resolution isless than 512x360, the image size is smaller thanthat of the OSD’s and is also not converted as 1:1image size.
A21Specifications L2300B23 inches (58.4cm) Flat Panel Active matrix-TFT LCD Hard coating(3H), Anti-Glare0.258 mm x 0.258mmHorizontal Freq. D-Sub : 28 - 92kHz (Analog)DVI-D : 28 - 92kHz (Digital)Vertical Freq. Analog :48 - 87Hz (Automatic)Digital : 57 - 63Hz (Automatic)Input Form Separate TTL, Positive/NegativeComposite TTL, Positive/NegativeSOG (Sync On Green) DigitalSignal Input 15 pin D-Sub Connector(Analog)DVI - D connector (Digital)Input Form RGB Analog (0.7Vp-p/75ohm), DigitalMaxD-SUB : Analog - VESA 1920 x 1200@60HzDVI-D :Digital - VESA 1920 x 1200@60HzRecommend VESA 1920 x 1200@60HzDDC 2BNormal: 80WStand-by/Suspend≤2WDPM Off ≤2WSoft Off ≤2W Width 57.9 cm / 22.79 inchesHeight 44.06 cm / 17.35 inches(Min)52.06 cm / 20.49 inches(Max)Depth 23.81 cm / 9.37 inchesNet 10.4 kg(22.92 Ibs) Tilt range -5˚~30˚Swivel range 90˚Height range 80mm / 3.15 inchesAC 100-240V~ 50/60Hz 1.0AOperating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 95 % non-CondensingDisplaySync InputVideo InputResolutionPlug&PlayPowerConsumptionDimensions&Weight(with tilt/ swivel stand)Tilt/Swivel RangePower InputEnvironmentalConditions
A22Specifications L2300C23 inches (582.96cm) Flat Panel Active matrix-TFT LCD Hard coating(3H), Anti-Glare0.375 mm x 0.124mm x RGBHorizontal Freq. D-Sub : 30 - 83kHz (Analog)DVI-D : 30 - 72kHz (Digital)Vertical Freq. Analog : 56 - 85Hz (Automatic)Digital : 56 - 85Hz (Automatic)Input Form Separate TTL, Positive/NegativeComposite TTL, Positive/NegativeSOG (Sync On Green) DigitalSignal Input 15 pin D-Sub Connector(Analog)DVI - D connector (Digital)Input Form RGB Analog (0.7Vp-p/75ohm), DigitalMaxD-SUB : Analog - VESA 1600 x 1200@60HzDVI-D :Digital - VESA 1360 x 768@60HzRecommend VESA 1360x 768@60HzDDC 2BNormal: 90WStand-by/Suspend≤2WDPM Off ≤2WSoft Off ≤2W Width 57.9 cm / 22.79 inchesHeight 44.06 cm / 17.35 inches(Min)52.06 cm / 20.49 inches(Max)Depth 23.81 cm / 9.37 inchesNet 11.6 kg(25.57 Ibs) Tilt range -5˚~30˚Swivel range 90˚Height range 80mm / 3.15 inchesAC 100-240V~ 50/60Hz 1.0AOperating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 95 % non-CondensingDisplaySync InputVideo InputResolutionPlug&PlayPowerConsumptionDimensions&Weight(with tilt/ swivel stand)Tilt/Swivel RangePower InputEnvironmentalConditions
A23SpecificationsAttached( O ), Detached ( )Attached( O ), Detached ( )Wall-outlet type or PC-outlet typeTilt/Swivel StandSignal cablePower cordNOTEInformation in this document is subject to change without notice.
A24SpecificationsDisplay Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)123456789101112131415161718640 x 480800 x 6001024 x 7681280 x 10241600 x 12001920 x 12001152 x 900640 x 350720 x 400640 x 480800 x 600832 x 6241024 x 7681152 x 8701280 x 1024640 x 480800 x 6001024 x 76831.4737.8848.3663.9875.0074.0461.8031.4731.4737.5046.8849.7260.1268.6879.9843.2753.6768.6860606060.02606065.967070757575757575.02858585Preset Modes (Resolution)󰢹󰢹2300B monitor󰢹󰢹2300C monitorDisplay Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)1234567891011121314151617640 x 350720 x 400640 x 480640 x 480640 x 480800 x 600800 x 600800 x 600832 x 6241024 x 7681024 x 7681024 x 7681280 x 7201360 x 7681280 x 10241280 x 10241600 x 120031.4731.4731.4737.5043.2737.8846.8853.6749.7348.3660.1268.6844.7847.7263.9879.9875.007070607585607585756075856060607560●D-Sub : Mode 1 ~ Mode 17 ●DVI-D : Mode 1 ~ Mode 14●D-Sub : Mode 1 ~ Mode 18 ●DVI-D : Mode 1 ~ Mode 6
A25SpecificationsVESA wall mountingConnected to another object (stand type and wall-mounted type. This monitor accepts a VESA-compliant mounting interface pad.- optional)For further information, refer to the VESA WallMounting Instruction Guide.Kensington Security Slot- optionalConnected to a locking cable that can be purchasedseparately at most computer storesIndicatorNormalStand-by/SuspendDPMS OffgreenamberamberLED ColorMODE
A26SpecificationsSignal Connector Pin AssignmentPin Signal(DVI-D)123456789101112131415T. M. D. S. Data2-T. M. D. S. Data2+T. M. D. S. Data2/4 ShieldT. M. D. S. Data4-T. M. D. S. Data4+DDC ClockDDC DataAnalog Vertical Sync.T. M. D. S. Data1-T. M. D. S. Data1+T. M. D. S. Data1/3 ShieldT. M. D. S. Data3-T. M. D. S. Data3++5V PowerGround (return for +5V, H. Sync. and V. Sync.)Pin Signal(DVI-D)161718192021222324Hot Plug DetectT. M. D. S. Data0-T. M. D. S. Data0+T. M. D. S. Data0/5 ShieldT. M. D. S. Data5-T. M. D. S. Data5+T. M. D. S. Clock ShieldT. M. D. S. Clock+T. M. D. S. Clock-T. M. D. S. (Transition Minimized Differential Signaling)DVI-D Connector
Digitally yours
Regulatory informationRegulatory information
Regulatory Information cont. FCC Compliance StatementThis equipment has been tested and found to complywithin the limits of a Class B digital device pursuant to Part15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation.This equipment generates, uses, and can radiate radiofrequency energy and if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, there isno guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radioor television reception (which can be determined byturning the equipment on and off), the user is encouragedto try to correct the interference by using one or more ofthe following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and the receiver.Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.Consult the dealer or an experienced radio/TVtechnician for help.Caution: Changes or modifications not expressly approvedby the party responsible for compliance could void theuser's (or your) authority to operate the equipment. Onlyperipherals (digital input/output devices, terminals, printers,etc.) certified to comply with the Class B limits may beattached to this monitor. Operation with non-certifiedperipherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used withthis System.Canadian DOC NoticeThis Class B digital apparatus meets all requirements ofthe Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe Brespecte toutes les exigences du Règlement sur lematériel brouilleur du Canada.CE Conformity Notice (for Europe)Products with the “CE” Marking comply with the EMCDirective(89/336/EEC) and LOW VOLTAGE Directive(73/23/EEC) issued by the Commission of the EuropeanCommunity.Compiance with these directives implies conformity to thefollowing European Norms :• EN 55022 ; Radio Frequency Interference• EN 50082-1:1992 ; Electromagnetic Immunity• EN 60555-2 ; Power Line Harmonics• EN 60555-3 ; Voltage Fluctuations• EN 60950 ; Product SafetyLow Radiation Compliance (MPR II)This monitor meets one of the strictest guidelines availabletoday for low radiation emissions, offering the user extrashielding and an antistatic screen coating. Theseguidelines, set forth by a government agency in Sweden,limit the amount of emission allowed in the Extremely LowFrequency (ELF) and Very Low Frequency (VLF)electromagnetic range.TCO95 (TCO95 applied model only)Congratulations! You have just purchased a TCO’95 approved and labelledproduct! Your choice has provided you with a productdeveloped for professional use. Your purchase has alsocontributed to reducing the burden on the environment andto the further development of environmentally-adaptedelectronic products.01NOTICEThe regulations are applied only to the products with theID LABEL indicating specific requirements.NOTICEThe regulations are applied only to the products with theID LABEL indicating specific requirements.NOTICEThe regulations are applied only to the products with theID LABEL indicating specific requirements.
Regulatory Information cont. 02Why do we have environmentally labelled computers? In many countries, environmental labelling has become anestablished method for encouraging the adaptation ofgoods and services to the environment. The main problemas far as computers and other electronic equipment areconcerned is that environmentally harmful substances areused both in the products and during their manufacture.Since it has not been possible so far for the majority ofelectronic equipment to be recycled in a satisfactory way,most of these potentially damaging substances sooner orlater enter Nature.There are also other characteristics of a computer, such asenergy consumption levels, that are important from boththe working and natural environment viewpoints. Since alltypes of conventional electricity generation have anegative effect on the environment (acidic- and climatic-influencing emissions, radioactive waste, etc.), it is vital toconserve energy. Electronic equipment in officesconsumes as enormous amount of energy, since it is oftenroutinely left running continuously.What does the environmenal labelling involve?This product meets the requirements for the TCO’95 scheme, which provides for international environmentallabelling of personal computers. The labelling scheme wasdeveloped as a joint effort by the TCO (The SwedishConfederation of Professional Employees), Naturckyddsföreningen (The Swedish Society for NatureConservation), and NUTEK (The National Board forIndustrial and Technical Development in Sweden), andSEMKO AB (an international certification agency).The requirements cover a wide range of issues: environment, ergonomics, usability, emission of electricaland magnetic fields, energy consumption and electricaland fire safety.The environmental demands concern, among other things,restriction on the presence and use of heavy metals,brominated and chlorinated flame retardants, CFCs(freons), and chlorinated solvents. The product must beprepared for recycling, and the manufacturer is obliged tohave an environmental plan, which must be adhered to ineach country where the company implements its operational policy. The energy requirements include a demand that thecomputer and/or display, after a certain period of inactivity,shall reduce its power consumption to a lower level, in oneor more stages. The length of time to reactivate thecomputer shall be reasonable for the user.Labelled products must meet strict environmentaldemands, for example, in respect of the reduction ofelectric and magnetic fields, along with physical and visualergonomics and good usability.The following is a brief summary of the environmentalrequirements met by this product. The completeenvironmental criteria document may be ordered from:TCO Development UnitLinnegatan 14, S-11494 Stockholm, SwedenFAX +46-8 782 92 07E-mail (Internet): development@tco.seCurrent information regarding TCO’95 approved andlabelled products may also be obtained on the Internetusing the address: http://www.tco-info.com/TCO’95 is a co-operative project between:Environmental requirementsBrominated flame retardants are present in printed circuitboards, cabling, casings, and housings, and are added todelay the spread of fire. Up to 30% of the plastic in acomputer casing can consist of flame-retardantsubstances. These are related to another group ofenvironmental toxins, PCBs, and are suspected of givingrise to similar harm, including reproductive damage in fish-eating birds and mammals. Flame retardants have beenfound in human blood, and researchers fear that they candisturb fetus development. Bio-accumulative1TCO’95 demands require that plasticcomponents weighing more than 25 grams must notcontain flame retardants with organically bound chlorine orbromine.Lead can be found in picture tubes, display screens,solder, and capacitors. Lead damages the nervoussystem and in higher doses causes lead poisoning. The NUTEKNaturskyddsföreningen Närings- och teknikutvecklingsverket SEMKO
Regulatory Information cont. 03relevant bio-accumulative TCO’95 requirement permitsthe inclusion of lead, as no replacement has yet beendeveloped.Cadmium is present in rechargeable batteries and in thecolor-generating layers of certain computer displays.Cadmium damages the nervous system and is toxic inhigh doses. The relevant bio-accumulative TCO’95requirement states that batteries may not contain morethan 25 ppm (parts per million) of cadmium. The color-generating layers of display screens must not contain anycadmium.Mercury is sometimes found in batteries, relays andswitches. Mercury damages the nervous system and istoxic in high doses. The relevant bio-accumulative TCO’95requirement states that batteries may not contain morethan 25 ppm of mercury and that no mercury is present inany of the electrical or electronic components concernedwith the display unit.CFCs (freons) are sometimes used for washing printedcircuit boards and in the manufacture of expanded foamfor packaging. CFCs break down ozone and therebydamage the ozone layer in the atmosphere, causingincreased reception on Earth of ultra-violet light withconsequent increased risks of skin cancer (malignantmelanoma). The relevant TCO’95 requirement: NeitherCFCs nor HCFCs may be used during the manufacture ofthe product or its packaging.1Bio-accumulative means that the substance accumulateswithin living organisms.Shipping PackageThe packaging material can be recycled, or you can saveit to return the monitor to a service center for repair ordisposal.CFC Compounds in Distribution PackagingCushioning material used for shipping finished monitorsare not manufactured with nor do they contain any CFCcompounds.Design for Disassembly/RecyclingThese monitors have been designed for easy end-of-lifedisassembly and recycling. Fasteners are generally of thesame type for efficient disassembly. Components made ofdifferent materials can be easily separated and plasticshave been identified using intermational symbols to aid inrecycling.Monitor DisposalTCO'99 (TCO'99 applied model only)Congratulations! You have just purchased a TCO’99 approved and labelledproduct! Your choice has provided you with a productdeveloped for professional use. Your purchase has alsocontributed to reducing the burden on the environment andalso to the further development of environmentallyadapted electronics products.Why do we have environmentally labelled computers?In many countries, environmental labelling has become anestablished method for encouraging the adaptation ofgoods and services to the environment. With the growingmanufacture and usage of electronic equipmentthroughout the world, there is a recognized concern for thematerials and substances used by electronic productswith regards to their eventual recycling and disposal. Byproper selection of these materials and substances, theimpact on the environment can be minimized.There are also other characteristics of a computer, such asenergy consumption levels, that are important from theviewpoints of both the work (internal) and natural (external)environments. Electronic equipment in offices is often leftrunning continuously, resulting in unnecessaryconsumption of large amounts of energy and additionalpower generation. From the standpoint of carbon dioxideemissions alone, it is vital to save energy.What does labelling involve?The product meets the requirements for the TCO’99scheme which provides for international and environmentallabelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of ProfessionalEmployees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) andStatens Energimyndighet (The Swedish NationalEnergy Administration).WARNINGIf you need to dispose of a monitor, ask a qualified servicerepresentative for the proper procedure. Improper disposal couldresult in personal injury from implosion.
Regulatory Information cont. 04Approval requirements cover a wide range of issues:ecology, ergonomics, emission of electrical andmagnetical fields, energy consumption and electricalsafety. Ecological criteria impose restrictions on the presence anduse of heavy metals, brominated and chlorinated flameretardants, and other substances. The product must beprepared for recycling and the manufacturing site(s) shallbe certified according to ISO14001 or EMAS registered.Energy requirements include a demand that the systemunit and/or display, after a certain period of inactivity,shall reduce its power consumption to a lower level in oneor more stages. The length of time to reactivate the systemunit shall be reasonable for the user.Labelled products must meet strict environmentaldemands, for example, in respect of the reduction ofelectrical and magnetical fields as well as work load andvisual ergonomics.Below you will find a brief summary of the ecologicalrequirements met by this product. The completeecological criteria document can be found at TCODevelopment’s website http://www.tcodevelopment.com ormay be ordered from:TCO DevelopmentSE-114 94 STOCKHOLM, SwedenFax: +46 8 782 92 07Email : development@tco.seInformation regarding TCO’99 approved and labelledproducts may also be obtained athttp://www.tcodevelopment.comEcological requirementsFlame retardantsFlame retardants may be present in printed wiring boardlaminates, cables, and housings. Their purpose is toprevent, or at least to delay the spread of fire. Up to 30%by weight of the plastic in a computer casing can consist offlame retardant substances. Many flame retardantscontain bromine or chlorine, and these flame retardantsare chemically related to PCBs (polychlorinatedbiphenyls). Both the flame retardants containing bromineor chlorine and the PCBs are suspected of giving rise tohealth effects, including reproductive damage in fish-eatingbirds and mammals, due to the bio-accumulative*processes when not disposed of in accordance with strictstandards for disposal.TCO’99 requires that plastic components weighing morethan 25 grams shall not contain flame retardants withorganically bound bromine or chlorine. Flame retardantsare allowed in the printed wiring board laminates due tothe lack of commercially available alternatives.Cadmium**Cadmium is present in rechargeable batteries and in thecolour-generating layers of certain computer displays.TCO’99 requires that batteries, the colour-generatinglayers of display screens, and the electrical or electronicscomponents shall not contain any cadmium.Mercury**Mercury is sometimes found in batteries, relays andswitches. TCO’99 requires that batteries shall not containany mercury. It also demands that mercury is not presentin any of the electrical or electronics componentsassociated with the labelled unit. There is however oneexception. Mercury is, for the time being, permitted in theback light system of flat panel monitors as there today isno commercially available alternative. TCO aims onremoving this exception when a mercury free alternative isavailable.Lead**Lead can be found in picture tubes, display screens,solders and capacitors. TCO’99 permits the use of leaddue to the lack of commercially available alternatives, butin future requirements TCO Development aims atrestricting the use of lead._____________________________________________* Bio-accumulative is defined as substances which accumulate in living organisms.**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.
05Regulatory Information cont. TCO’03(TCO’03 applied model only)Congratulations!The display you have just purchased carries the TCO’03Displays label. This means that your display is designed,manufacturedand tested according to some of the strictest quality andenvironmental requirements in the world. This makes for ahigh performance product, designed with the user in focusthat also minimizes the impact on our natural environment.Some of the features of the TCO’03 Display requirements:Ergonomics• Good visual ergonomics and image quality in order toimprove the working environment for the user and toreduce sight and strain problems. Importantparameters are luminance, contrast, resolution,reflectance, colour rendition and image stability.Energy• Energy-saving mode after a certain time – beneficialboth for the user and the environment• Electrical safetyEmissions• Electromagnetic fields• Noise emissionsEcology• The product must be prepared for recycling and themanufacturer must have a certified environmentalmanagement system such as EMAS or ISO 14 001• Restrictions onchlorinated and brominated flame retardants andpolymersheavy metals such as cadmium, mercury and lead.The requirements included in this label have beendeveloped by TCO Development in co-operation withscientists, experts, users as well as manufacturers all overthe world. Since the end of the 1980s TCO has beeninvolved in influencing the development of IT equipment ina more user-friendly direction. Our labelling system startedwith displays in 1992 and is now requested by users andIT-manufacturers all over the world.For more information, please visitwww.tcodevelopment.comInformation for Environmental PreservationLGE. announced the 'LG Declaration for a CleanerEnvironment' in 1994, and this ideal has served as aguiding managerial principle ever since. The Declaration isa foundation that has allowed us to undertakeenvironmentally friendly activities in careful considerationof economic, environmental, and social aspects.We promote activities for environmental preservation, andwe specifically develop our products to embrace theconcept of environment-friendly. We minimize the hazardous materials contained in ourproducts. For example, there is no cadmium to be found inour monitors.Information for recyclingThis monitor may contain parts which could be hazardousto the environment. It is important that this monitor berecycled after use.LGE. handles all waste monitors through anenvironmentally acceptable recycling method. There areseveral take-back and recycling systems currently inoperation worldwide. Many parts will be reused andrecycled, while harmful substances and heavy metals aretreated by an environmentally friendly method.If you want to find out more information about our recyclingprogram, please contact your local LG vendor or acorporate representative of LG. We set our vision and policies on a cleaner world byselecting the issue of the global environment as a task forcorporate improvement. Please visit our website for moreinformation about our ‘green’ policies.http://www.lge.com/experience/social_commitment/enviroment.jspEnglish
06Regulatory Information cont. Informationen zur Erhaltung der UmweltIm Jahr 1994 verkündete LGE die 'LG Declaration for aCleaner Environment' (LG Erklärung für eine sauberereUmwelt). Seitdem dient dieses Ideal als führendes Prinzipdes Unternehmens. Diese Erklärung war die Basis für dieDurchführung von umweltfreundlichen Aktivitäten, wobei wirtschaftliche,umweltbezogene und soziale Aspekte in die Überlegungen mit einbezogen wurden.Wir fördern Aktivitäten zum Schutz der Umwelt und dieEntwicklung unserer Produkte ist darauf ausgerichtet,unserem Konzept bezüglich Umweltfreundlichkeit gerechtzu werden. Wir sind darauf bedacht, den Anteil der in unserenProdukten enthaltenen schädlichen Materialien zuminimieren. So ist in unseren Monitoren beispielsweisekein Kadmium zu finden.Informationen zum Thema RecyclingDieser Monitor enthält Teile, die umweltschädlich seinkönnen. Es ist unbedingt erforderlich, dass der Monitorrecycelt wird, nachdem er außer Dienst gestellt wurde.Bei LGE. werden alle ausrangierten Monitore in einemunter umweltbezogenen Aspekten geeigneten Verfahrenrecycelt. Augenblicklich sind weltweit mehrereRücknahme- und Recyclingsysteme im Einsatz. VieleTeile werden wieder verwendet und recycelt. SchädlicheSubstanzen und Schwermetalle werden durchumweltverträgliche Verfahren behandelt.Falls Sie mehr über unser Recyclingprogramm erfahrenmöchten, wenden Sie sich bitte an Ihren lokalen LG-Händler oder einen Unternehmensvertreter von LG. Wir richten unsere Firmenpolitik auf eine sauberereUmwelt hin aus, indem wir umweltspezifische Aspekte alswichtigen Punkt in die Weiterentwicklung unseresUnternehmens einfließen lassen. ZusätzlicheInformationen über unsere ‘grüne’ Firmenpolitik erhaltenSie auf unserer Website.http://www.lge.com/experience/social_commitment/enviroment.jspInformation sur la protection de l’environnementLGE. a publié sa 'Déclaration en faveur d’unenvironnement plus propre' en 1994 et celle-ci est restée,depuis lors, un principe directeur de notre entreprise. Cettedéclaration a servi de base à notre réflexion et nous apermis de prendre en compte à la fois les aspectséconomiques et sociaux de nos activités, tout enrespectant l’environnement.Nous encourageons les activités en faveur de lapréservation de l’environnement et c’est dans cet esprit que nous développons nos produits : nous réduisons auminimum les matières dangereuses qui entrent dans leurcomposition et l’on ne trouve pas de cadmium, parexemple, dans nos moniteurs.Information sur le recyclageCe moniteur peut contenir des composants qui présententun risque pour l’environnement. Il est donc important quecelui-ci soit recyclé après usage.LGE. traite les moniteurs en fin de cycle conformément àune méthode de recyclage respectueuse del’environnement. Nous reprenons nos produits et lesrecyclons dans plusieurs sites répartis dans le mondeentier. De nombreux composants sont réutilisés etrecyclés, et les matières dangereuses, ainsi que lesmétaux lourds, sont traités selon un procédé écologique.Si vous souhaitez plus de renseignements sur notreprogramme de recyclage, veuillez contacter votrerevendeur LG ou un l’un de nos représentants. Nous voulons agir pour un monde plus propre et croyonsau rôle de notre entreprise dans l’amélioration del’environnement. Pour plus de renseignements sur notrepolitique “verte”, rendez visite à notre site :http://www.lge.com/experience/social_commitment/enviroment.jspInformazioni per la tutela dell’ambienteLa LGE. ha annunciato nel 1994 la cosiddetta 'LGDeclaration for a Cleaner Environment' (Dichiarazione diLG a favore di un ambiente più pulito), un ideale che daallora funge da principio ispiratore della gestioneaziendale. La dichiarazione rappresenta il fondamento checonsente di intraprendere attività a favore dell'ambientetenendo conto degli aspetti economici, ambientali e sociali.DeutschFrançaisItaliano
07EspanõlRegulatory Information cont. Noi della LG, promuoviamo attività a favore della tuteladell'ambiente sviluppando appositamente i nostri prodottiper cogliere il concetto del rispetto dell’ambiente riducendoi materiali dannosi presenti nei nostri prodotti. Ad esempionei nostri monitor non è presente il cadmio.Informazioni per il riciclaggioIl monitor può presentare componenti che potrebberorisultare eventualmente dannosi per l'ambiente. Èimportante che il monitor sia riciclato al termine del suoutilizzo.La LGE. gestisce tutti i monitor di rifiuto con un metodo diriciclaggio soddisfacente dal punto di vista ambientale. Intutto il mondo sono attualmente in funzione numerosisistemi di riciclaggio e recupero. I diversi componenti sonoriutilizzati e riciclati, mentre le sostanze dannose e i metallipesanti vengono trattati con un metodo rispettosodell’ambiente.Se si desiderano maggiori informazioni in merito alprogramma di riciclaggio, è consigliabile rivolgersi alproprio rivenditore LG o ad un rappresentante aziendaledella LG. Noi della LG impostiamo la nostra visione e le nostrepolitiche a favore di un mondo più pulito ponendo laquestione dell'ambiente dal punto di vista globale comeuna mansione rivolta al miglioramento della nostraazienda. Vi invitiamo a visitare il nostro sito internet perulteriori informazioni sulla nostra politica “verde”.http://www.lge.com/experience/social_commitment/enviroment.jspInformación para la conservación medioambientalLGE. presentó la 'Declaración para un entorno más limpiode LG' en 1994 y este ideal ha servido para guiar nuestrosprincipios empresariales desde entonces. La Declaraciónes la base que nos ha permitido llevar a cabo tareas querespetan el medio ambiente siempre teniendo en cuentaaspectos sociales, económicos y medioambientales.Promocionamos actividades orientadas a la conservacióndel medio ambiente y desarrollamos nuestros productosespecíficamente para que se ajusten a la filosofía queprotege el entorno. Reducimos al máximo el uso de materiales de riesgo ennuestros productos. Un ejemplo de ello es la ausenciatotal de cadmio en nuestros monitores.Información para el reciclajeEste monitor puede contener piezas que entrañen riesgosmedioambientales. Es importante reciclar este monitordespués de su utilización.LGE. trata todos los monitores usados siguiendo unmétodo de reciclaje que no daña al entorno. Contamoscon diversos sistemas de recuperación y reciclaje quefuncionan a nivel mundial en la actualidad. Es posiblereciclar y reutilizar muchas de las piezas, mientras que lassustancias dañinas y los metales pesados se tratansiguiendo un método que no perjudique al medioambiente. Si desea obtener más información acerca delprograma de reciclaje, póngase en contacto con suproveedor local de LG o con un representante empresarialde nuestra marca. Basamos nuestra visión y nuestras políticas en un mundomás limpio y para ellos optamos por un entorno globalcomo tarea principal de nuestra evolución como empresa.Visite nuestra página Web para obtener más informaciónsobre nuestras políticas ecológicas.http://www.lge.com/experience/social_commitment/enviroment.jspInformações relacionadas à preservaçãoambientalA LGE. anunciou a 'LG Declaration for a CleanerEnvironment' (Declaração da LG para um ambiente maislimpo) em 1994 e esse ideal tem servido desde entãocomo um princípio administrativo de orientação. ADeclaração é a base que nos tem permitido realizaratividades favoráveis ao ambiente com consideraçãoatenta aos aspectos econômicos, ambientais e sociais.Promovemos atividades de preservação ambiental edesenvolvemos nossos produtos para englobarespecificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossosprodutos. Por exemplo, não há cádmio em nossosmonitores.Português
08Regulatory Information cont. Informações relacionadas à reciclagemEste monitor pode conter peças que podem representarriscos ao ambiente. É importante que ele seja recicladoapós o uso.A LGE. cuida de todos os monitores descartados atravésde um método de reciclagem agradável ao ambiente. Hávários sistemas de devolução e reciclagem atualmente emoperação no mundo. Muitas peças serão reutilizadas erecicladas e as substâncias nocivas e os metais pesadospassarão por tratamento através de um método favorávelao ambiente.Para obter mais informações sobre nosso programa dereciclagem, entre em contato com seu fornecedor LG localou com um representante corporativo da LG. Definimos nossa visão e nossas políticas relacionadas aum mundo mais limpo selecionando a questão doambiente global como uma tarefa de aprimoramentocorporativo. Visite nosso site para obter mais informaçõessobre nossas políticas de meio ambiente.http://www.lge.com/experience/social_commitment/enviroment.jspInformatie met betrekking tot het behoud vanhet milieuLGE. publiceerde in 1994 de 'LG Declaration for a CleanerEnvironment' (de LG-verklaring met betrekking tot eenschoner milieu). Deze verklaring en het ideaal van eenschoner milieu fungeren sindsdien als een bestuurlijkeleidraad voor onze onderneming. Op basis van dezeverklaring ontplooien wij milieuvriendelijke activiteiten,waarbij er zowel met sociale en economische aspecten,als met milieuaspecten zorgvuldig rekening wordtgehouden.Wij ondersteunen activiteiten die zijn gericht op hetbehoud van het milieu en wij houden bij het ontwikkelenonze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen inonze producten. Er wordt bijvoorbeeld geen cadmiumverwerkt in onze monitors.Informatie met betrekking tot recyclingDeze monitor bevat materialen die schadelijk zoudenkunnen zijn voor het milieu. Het is belangrijk dat dezemonitor aan het einde van zijn levensduur wordtgerecycled.LGE. verwerkt alle afvalmonitors via een milieuvriendelijkerecyclingmethode. Hiervoor worden er momenteelwereldwijd verscheidene inname- en recyclingsystemengehanteerd. Een groot aantal onderdelen wordt opnieuwgebruikt en gerecycled, waarbij schadelijke stoffen enzware metalen volgens een milieuvriendelijke methodeworden verwerkt.Voor meer informatie over ons recyclingprogramma kunt ucontact opnemen met uw plaatselijke LG-vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonerewereld vloeien voort uit het feit dat wij het milieu hebbenaangemerkt als een onderwerp dat speciale aandachtverdient binnen onze onderneming. Bezoek onze websitevoor meer informatie over ons 'groene' beleid.http://www.lge.com/experience/social_commitment/enviroment.jsp»ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚',ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎËÔ‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘Ë ·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓωÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ ËÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï.Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡ÌÂÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌËÂ‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË ÒÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË. Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯ËıÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ.»ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚, ÍÓÚÓ˚ÂÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â.ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒÎÂËÒÔÓθÁÓ‚‡Ìˡ.Nederlands Russian
09Regulatory Information cont. KÓÔÓ‡ˆËˇ LGE ÔÂÂ‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ÂÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„ÓÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍËÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.«‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ ÍÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ ÍÓÔÓ‡ˆËË LG. Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛ Ó̇¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ:http://www.lge.com/experience/social_commitment/enviroment.jsp환경 보존 정보LG 전자는 1994년 'LG 환경 선언문'을 발표한 후 현재까지이를 기업 경영의 이념으로 삼아왔습니다. 이 선언문을바탕으로 LG 전자는 모든 경영 활동에서 경제성뿐만아니라 환경성 및 사회성을 주요 의사 결정의 기준으로삼음으로써 지속적으로 환경 친화적인 경영을 전개하고있습니다.본사는보다활발한환경보존활동과더불어환경친화적 제품 개발에 주력해 왔습니다. 또한 제품에 포함되는 환경 위해 요소를 최소화하는데에도 노력을 게을리하지 않고 있습니다. LG 전자모니터의 경우 카드뮴을 전혀 사용하지 않는 것에서도이러한 노력을 알 수 있습니다.재활용 정보본 모니터에는 환경에 위해를 주는 부품이 포함되어있을 수도 있습니다. 따라서 사용이 끝난 모니터는재활용하는 것이 좋습니다.폐모니터는 모두 환경 친화적 방식으로 처리됩니다. 현재세계적으로 운영되고 있는 회수 및 재활용 시스템에는여러 가지가 있습니다. 대부분의 부품의 경우 재사용또는 재활용되지만 환경 위해 물질과 중금속은 환경친화적 방법으로 처리됩니다.본사의 재활용 프로그램에 대한 자세한 정보는 각 지역의LG 공급업체나 LG 기업 대표부에 문의하시기 바랍니다. LG 전자는 기업 개선 정책의 하나로 지구 환경 문제를채택함으로써 보다 나은 환경을 만들어 나가기 위한비전과 정책을 수립했습니다. 본사의 친환경 정책에대한 자세한 정보를 보시려면 아래의 웹 사이트를방문하십시오.http://www.lge.co.kr/about/digitallg/environment/environment.jspEPA (U.S.A only)(EPA applied model only)ENERGYSATRis a set of power-saving guidelinesissued by the U.S. Environmental ProtectionAgency(EPA).NOM MARK (Mexico only)As an ENERGY STAR Partner LGE U. S.A.,Inc. has determined that this productmeets the ENERGY STAR guidelines forenergy efficiency.

Navigation menu