LG Electronics USA LACFS (1)Car Navigation/CD Player (2)Car CD Player User Manual
LG Electronics USA (1)Car Navigation/CD Player (2)Car CD Player
Contents
- 1. Spec.
- 2. User Manual
User Manual
Car Navigation System
OWNER’S MANUAL
Veloster
Please read this manual carefully before operating your set and retain it for future reference.
Designs and specifi cations are subject to change without prior notice.
ENGLISH
2
Table of contents General information 7
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
NOTES ON COPYRIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
FCC information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Name of each component 12
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Steering wheel remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic operation 15
Start-up screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning the unit on/Turning the unit off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Inserting a disc/Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Ejecting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Displaying the GPS time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Selecting a source on the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Selecting a source on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Rear view camera (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setup 17
General operations of SETUP menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Bluetooth/System ...........................................................................................................17
Traffic ................................................................................................................................ 19
Navigation ........................................................................................................................ 19
Audio................................................................................................................................ 20
Display .............................................................................................................................. 21
3
Table of contents Getting started with navigation 22
What is GPS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
About satellite signals/Acquiring satellite signals . . . . . . . . . . . . . . . . . . . . . . . 22
Initial navigation screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Indicators of the map screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
How to view a map screen ......................................................................................... 22
Changing the scale of a map ................................................................................... 23
Adjusting the navigation volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Destination input menu 24
Navigation menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
General operations of destination menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Address Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Last destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Address book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
POI (Point of Interest) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Near position ..................................................................................................................27
Near destination ............................................................................................................ 28
In City ............................................................................................................................... 28
Name ............................................................................................................................... 28
Hyundai service ............................................................................................................. 28
Phone number .............................................................................................................. 28
GPS input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Continue guidance/Stop guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Tour planner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Store destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Store position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Home 1/Work 2/3 ~ 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4
Table of contents Using the map menu 36
Map menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
General operations of map menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
POI category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
2D/3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Info on route/Full screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Manoeuvre/Full screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Store position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Tour planner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Route options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Browser/Detour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Info nearby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Info on route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Bluetooth wireless technology 43
Understanding Bluetooth wireless technology . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting the unit and a device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Viewing the connected device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Disconnecting the bluetooth phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Connecting the bluetooth phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Deleting a connected phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Changing the passkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Making a call by entering phone number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Transfer a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Switching the microphone on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Using your Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Using your Calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Making a call with speed dial numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Activating the audio streaming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
5
Table of contents CD/MP3/WMA/USB/iPod operation 51
Playing an audio CD and MP3/WMA/USB/iPod files . . . . . . . . . . . . . . . . . . . . . 51
Skipping to the next track/file .................................................................................. 52
Skipping to the previous track/file .......................................................................... 52
Returning to the beginning of the current track/file .......................................... 52
Search .............................................................................................................................. 52
Intro scanning ................................................................................................................ 52
Repeat function............................................................................................................. 52
Random function .......................................................................................................... 53
Playing files by classifying into folder/Album/Artist . . . . . . . . . . . . . . . . . . . . . 54
Browsing through folders/files using (the) "List" menu . . . . . . . . . . . . . . . . . . . 54
Searching music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting audio books playback speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Radio operation 57
Listening to stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Storing and recalling stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
AS (Autostore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Scanning broadcast frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
TA (Traffic announcement) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
NEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Region auto/off function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Auxiliary device operation 60
Using an AUX source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Adjusting the video screen (Default: Center) . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
6
Table of contents Voice recognition system 61
Voice recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Giving voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
How to say numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Voice command examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Help command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Troubleshooting 66
Index 68
Symbols for the display of traffic problems 69
7
Safety notes
The lightning flash with the arrowhead
symbol within an equilateral triangle is
intended to alert the user about the
presence of uninsulated dangerous
voltage within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilat-
eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instruc-
tions in the literature accompanying the
appliance.
Always operate the vehicle in a safe
manner. Do not become distracted by
the vehicle while driving and always be
fully aware of all driving conditions. Do
not change settings or any functions.
Pull over in a safe and legal manner
before attempting such operations.
To promote safety, certain functions are
disabled unless the hand break is on.
To reduce the risk of electric shock, do
not remove the cover or back of this
product. There are no user-serviceable
parts inside. Refer servicing to qualified
service personnel.
To reduce the risk of fire or electric
shock, do not expose this product to
dripping or splashing water, rain, or
moisture.
When driving your vehicle, be sure to
keep the volume of the unit low enough
to allow you to hear sounds coming
from the outside.
Do not drop it and avoid heavy impacts
at anytime.
The driver should not watch the moni-
tor while driving. If the driver watches
the monitor while driving, it may lead to
carelessness and cause an accident.
General information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
THE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING:
• Don't use a cellular phone when you
are driving. You must stop at a safe
place to use a cellular phone.
• The use of the navigation radio by
no means relieves the driver of his/
her responsibilities. The highway code
must always be observed. Always
observe the current traffic situation.
• The applicable traffic regulations and
the prevailing traffic situation always
take precedence over the instructions
issued by the navigation system if
they contradict one another.
• For traffic safety reasons, use the
navigation system menus only before
starting a journey or when the vehicle
is stationary.
• In certain areas, one-way streets and
turn off and entry prohibitions (e.g.
pedestrian zones) are not recorded.
In areas such as these the naviga-
tion system will issue a warning. Pay
particular attention to one-way streets
and turn off and entry restrictions.
• The navigation system does not take
the relative safety of the suggested
routes into consideration.
Road blocks, building sites, height or
weight restrictions, traffic or weather
conditions or other influences which
affect the route safety or travel time
are not taken into consideration for
the suggested routes. Use your own
discretion in order to decide on the
suitability of the suggested routes.
• The current legal road traffic speed
limit always takes priority over the
values stored on the data CD. It is
impossible to provide an assurance
that the speed values of the naviga-
tion system will always match those of
the current traffic regulations in every
situation.
Always observe the applicable legal
speed limits the traffic regulations.
The vehicle speedometer must always
be given priority for display of the
vehicle speed.
• Do not rely exclusively on the navi-
gation system when attempting to
locate an emergency service (hospital,
fire service etc.). It cannot be guar-
anteed that all available emergency
services in your vicinity are stored in
the database. Use your own discretion
and abilities to secure help in such
situations.
8
General information
9
CAUTION:
This product uses a Laser System.
To ensure proper use of this product,
please read this owner’s manual care-
fully and retain it for future reference.
Should the unit require maintenance,
contact an authorized service center.
Performing controls, adjustments, or
carrying out procedures other than
those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser
beam, do not try to open the enclosure.
Visible laser radiation when open. DO
NOT STARE INTO BEAM.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN DO
NOT VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS.
CAUTION:
• Do not keep the navigation system
running with the engine stopped.
Doing so may discharge the vehicle
battery. When you use the navigation
system, always keep the engine run-
ning.
• When the driver wants to operate
the navigation system, first park the
vehicle in a safe location and set the
parking brake. Operating the system
while driving can distract the driver
and may result in a serious accident.
• Do not disassemble or modify this
system. If you do, it may result in
accidents, fire, or electrical shock.
• Some country may have laws limiting
the use of video screens while driving.
Use the system only where it is legal
to do so.
• Do not use your phone in private
mode when you are driving. You must
stop at a safe location to use it.
Types of Playable Discs
This unit plays CD-R or CD-RW con-
taining audio titles, MP3 or WMA files.
• Depending on the conditions of the
recording equipment or the CD-R/
RW disc itself, some CD-R/RW discs
may not be able to play on the unit.
• Do not attach any seal or label to
either side (the labeled side or the
recorded side) of a disc.
•
Do not use irregularly shaped CDs
(e.g., heart-shaped
or octagonal). It
may result in malfunctions.
General information
Handling discs
• A defective or soiled disc
inserted into the unit can
cause sound to drop during
playback.
• Handle the disc by holding
its innerouter edges.
• Do not touch the surface of
the unlabeled side of the
disc.
Do not stick paper or tape
etc. on the surface.
Do not expose the disc to
direct sunlight or excessive
heat.
This unit cannot play 8 cm
disc (use 12 cm disc only).
• Clean the disc
before playback.
Wipe the disc from
the center outward
with a cleaning cloth.
• Never use solvents
such as benzine or
alcohol to clean the
disc.
NOTES ON COPYRIGHTS
It is forbidden by law to copy, broadcast,
show, broadcast via cable, play in pub-
lic, or rent copyrighted material without
permission.
This product features the copy protec-
tion function developed by Macrovision.
Copy protection signals are recorded on
some discs. When playing the pictures
of these discs on a unit, picture noise
will appear. This product incorporates
copyright protection technology that
is protected by method claims of cer-
tain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights own-
ers. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intend-
ed for home and other limited viewing
uses only unless otherwise authorized
by Macrovision Corporation. Reverse
engineering or disassembly is prohib-
ited.
10
General information
11
General information
iPod and iPhone is a trademark of
Apple Inc., registered in the U.S. and
other countries.
“Made for iPod” means that an elec-
tronic accessory has been designed to
connect specifically to iPod and has
been certified by the developer to meet
Apple performance standards.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifically to iPhone and
has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the opera-
tion of this device or its compliance with
safety and regulatory standards.
Bluetooth® is a trademark owned by
Bluetooth SIG, Inc.
FCC Information
The Federal Communications Commission Radio
Frequency Interference Statement includes the
following warning:
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protec-
tion against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television recep-tion, which can be
determined by turn-ing the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment
and receiver.
yConnect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
yConsult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Caution: Any changes or modications in
construction of this device which are not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
12
Name of each component
Control Panel
1. Disc slot
2. Eject (Z)
Press to eject a disc from the unit.
3. RESET hole
Press with thin object to reset the
unit when it does not operate nor-
mally.
4. FM/AM
Press to select FM/AM band.
5. MEDIA
Press to select a source: CD/USB/
iPod/BT/AUX
6. Display on/off ( )
Press to switch between the display
on and off.
7. LC D
Touch to operate.
8. Left knob (POWER/VOLUME)
- Press: power on/off
- Turn: volume control
9. Info ( )
Press to view the destination, route,
and traffic information.
• Destination: shows the informa-
tion of current vehicle
position and destina-
tion.
• Route: shows the route informa-
tion.
• Traffic: shows the traffic information.
- Traffic info on route: the list
of traffic information on active
route
- Traffic info nearby: the list of
traffic information around the
current vehicle position.
4
5
6
7
14
8
13
12
1110
1
2
9
15
16
17
3
13
Name of each component
10. ASEEK/TRACKD
• Press to:
- Automatic tuning: RADIO
- Track up/down: USB CD iPod
BT
• Press and hold to:
- Search (FF/REW): USB CD
iPod BT
11. SETUP ( )
• Press to access system settings.
(Page 17)
• Press and hold to check the device
ID, the software version, the naviga-
tion version, and the map version.
12. Right knob (TUNE)
Rotate it clockwise/counterclockwise.
• Searches the previous or next radio
frequency.
- Manual tuning
• Skips a track/file up/down in all list
screen.
• ZOOM IN/ZOOM OUT
- Rotate to change the map scale
on the map screen.
Repeat voice guidance ( )
Push to repeat the last guidance
advice when guidance is active.
13. PHONE ( )
Press to operate Bluetooth Hands-
Free function.
14. NAV
Press to enter destination menu.
Various methods for entering a des-
tination are available.
15. MAP
Press to display the map.
16. CD indicator light (CD-IN)
When a disc is inserted, the indicator
is illuminated.
17. Clock ( )
• Press to display the digital/analog
clock and outside temperature in
both power on/off status.
• Press and hold to display to the
[Clock] menu. (Page 18)
14
Name of each component
1. MODE
Press to select a source.
FM t AM t CD t USB (or iPod)
t BT t AUX t FM...
2. Volume (VOL+/VOL-)
Increases or decreases the volume level.
3. U/u
• Press to:
- Automatic tuning:
RADIO
- Track up/down: USB CD iPod
BT
• Press and hold to:
- Manual tuning: RADIO
- Search (FF/REW): USB CD iPod
BT
4.
Press to operate Bluetooth Hands-
Free function.
• Press to accept a call.
• Press to make a call from last calls.
• Press and hold to switch the sound
path during a call.
(Hands free y phone)
5.
Press to hang up a call.
6.
•
Press to activate voice recognition
mode.
•
Press once more to cancel voice
recognition.
MODE
VOL +
VOL -
1
2
3
4
5
6
Steering wheel remote control
15
Start-up screen
The unit starts after ignition switch is in
ACC or ON position.
Note
• The unit memorizes the last mode
that was last played. The last mode
is saved in the memory even if the
ignition switch is placed in the OFF
position. When the ignition switch is
placed in the ACC or ON position,
the mode is automatically recalled.
• It may take long time (about 20 sec-
onds) for the unit to be rebooted.
Turning the unit on
Press POWER on the control panel
when the system is off.
Note
When you insert the disc into the disc
slot, the unit is turned on automatically.
Turning the unit off
Press POWER on the control panel
when the system is on.
Inserting a disc
Insert a disc into the disc slot and play-
back starts automatically.
Adjusting the volume
Rotate the
volume knob (VOLUME) on
the control panel.
Note
When you turn the unit off, the current
volume level is automatically memo-
rized. Whenever you turn the unit back
on, it operates at the memorized
volume level.
If you turn the unit off/on below volume
level 5, the volume level is changed
to 5. If you turn the unit off/on above
volume level 20, the volume level is
changed to 20.
Ejecting a disc
Press Z on the control panel.
The disc is ejected from the loading
slot.
Note
If the ejected disc is not removed in
approximately 10 seconds, the disc is
automatically inserted again into the
loading slot.
Displaying the GPS time
Press the time ( ) on the control
panel when the system is on.
Press the time ( ) on the control
panel when the system is off.
Note
When the satellite signal is not received,
the “Synchronizing GPS time. Please
wait!” pop-up appears on the screen.
When the satellite signal is received, the
GPS time is displayed on the screen. To
receive the satellite signal, move to an
area free from tall obstructions.
Basic operation
16
Basic operation
Selecting a source on the
control panel
Press MEDIA repeatedly to select a
source.
The mode switches as follows.
CD t USB (or iPod) t BT t AUX t
CD...
Note
If a source is not connected to the unit,
the source is not recognized.
Selecting a source on the
screen
1. Select the source icon as shown in
the figure.
2. Touch the desired source.
Note
If a source is not connected to the unit,
the source is not recognized.
Rear view camera (Optional)
The rear view mode is displayed on the
unit when the gearshift is moved to
REVERSE (R) position.
Rear view mode also allows you to check
what is behind the vehicle.
When the unit is booted completely, the
guide line is displayed on the screen.
Note
• The rear view camera helps the driver
when driving in reverse direction. Do
not use this function for entertainment
purposes.
• The object in rear view may appear
closer or more distant than in reality.
17
General operations of SETUP
menu
The navigation system allows configura-
tion on the following menus: Bluetooth,
System, Traffic, Navigation, Audio,
Display
1. Turn the unit on.
2. Press on the control panel.
3. Touch the desired option.
4. Touch
the desired settings then
t
ouch
[Ok]
to confirm your selection.
Note
Touch
to return to the previous
screen. Press MAP to return to the cur-
rent location map screen.
Bluetooth
This menu describes connection
schemes of Bluetooth.
View Bluetooth device list
Allows you to view the paired device list.
Search for Bluetooth devices
Allows you to connect the unit and a blue-
tooth device by using the device´s blue-
tooth settings. (Page 43)
External device authorization
This allows you to use when you connect
your unit and bluetooth phone by using
your bluetooth phone settings. (Page
44)
Change passkey
You can change the passkey. (Page 46)
System
This menu describes system settings.
Language
Allows you to change the system and voice
recognition language.
Select the language you wish to use.
Use or to scroll up or down if nec-
essary.
Setup
18
Setup
Clock
This allows you to set the time format and
the summer time.
• Time format: change the time format
between “12h” and “24h”.
• Summer time: sets the summer time
to "On" or "Off".
The unit sets the clock
automatically by detect-
ing the summer time
whether it is the sum-
mer time season or not.
Even though the sum-
mer time is set to "On",
the unit sets the clock
to normal time (not
+1 hour) when it's not
summer time season.
Units/Temperature
Allows you to set the units of distance and
temperature displayed on the navigation
system.
- Units: changes the unit between "km"
and "mls".
- Temperature: changes the temperature
between “OC” and “OF”.
Navigation demo
This is a demonstration function. After a
route is set, a simulation of route guid-
ance to a destination is automatically
displayed.
• Navigation demo
- Off: demo mode is set off.
- 1x: sets the demo drive only once.
- Loop: repeat demo drive
• Speed: sets the speed of demo drive.
19
Factory settings
Allows you to set all of the settings
back to default.
- All: resets all the settings back to the
default settings.
- Phone: resets all settings related with
phones.
- Navigation: initializes all the settings
related with navigation.
- Audio/Media/Radio: resets all the set-
tings related with
Audio/Media/
Radio.
Traffic
This menu describes traffic information
settings.
TMC
Sets the TMC mode to “Off”, “Auto” or
“On”.
- Auto: a detour is calculated auto-
matically when a TMC event on
route is found.
- Off: switches off the TMC function.
- On: a detour is calculated manually
when a TMC event on route is
found (pop-up screen appears for
selection).
Automatic TMC station
When the TMC event is found on cur-
rent route, the strongest TMC station is
received automatically.
Favourite TMC station
Selects your favourite TMC station
(automatic TMC is then switched off).
Navigation
Describes the navigation menu.
Motorway junction view
Displays motorway junction on the map.
Enhanced lane guidance
Displays enhanced lanes on the map.
Plan different routes
Displays the route selection of short,
fast, and eco.
Speed alert
Displays speed alert icon on the map.
Dynamic guidance
Supports voice guidance over road
numbers, or etc in TTS (Text-to-
Speech) voicing system.
Setup
20
Setup
Audio
This menu describes audio settings.
SDVC (Speed Dependent Volume Control)
When the speed of your vehicle is more
than 40 km/h, the audio volume level
is higher than the original audio volume
level.
You can set the SDVC to On or Off.
- Off: volume control is not speed-
dependent.
- On: volume increases as the vehicle
speeds up.
Navigation volume
Sets voice guidance On/Off. If it is set
to "Off", it is automatically set back to
"On" when a new route guidance is
started.
Touchscreen click
Sets the touchscreen sound On/Off.
Sound (Default: Center)
Balance/Fader Bass/Mid/Treble
Balance/Fader Bass/Mid/Treble
Note
•
Touch [Center] to return to the default
settings.
• The surround mode and the variable
EQ may not be supported depending
on the type of external amplifier.
Balance
Touch b or B to adjust the sound the
left and right speakers.
Fader
Touch v or V to adjust the sound of the
front and rear speakers.
Bass, Mid, Treble
Touch b or B to adjust the Bass, Middle
or Treble.
Surround mode
Sets the Surround mode On/Off.
21
Variable EQ
Sets the variable EQ.
1. Touch [Variable EQ].
2. Touch the desired EQ.
- Detail: for details, touch [Detail].
- Normal: natural sound, sound
optimized for driver.
- Powerful: powerful sound
emphasizing bass and stereo
sound.
- Concert: sound similar to a
concert or live hall.
3. Touch [Ok].
Display
This menu describes the display set-
tings.
Brightness
Sets the display brightness to Low, Mid
(Middle), or High.
Map mode
Map colours combination can be
changed to improve visibility at day and
night.
- Auto: map is displayed by autolight or
illumination signal.
Illumination
On
Illumination
Off
Autolight Off
(Day) Map: day Map: day
Autolight On
(Night) Map: night Map: night
Autolight is
not detected Map: night Map: day
- Day: the map is always displayed in
bright colours.
- Night: the map is always displayed in
dark colours.
Setup
What is GPS?
The Global Positioning System (GPS)
is a satellite-based navigation system
made up of a network of 24 satel-
lites placed into orbit by the U.S.
Department of Defense.
GPS was originally intended for military
applications, but in the 1980s, the gov-
ernment made the system available for
civilian use.
GPS works in any weather conditions,
anywhere in the world, 24 hours a day.
There are no subscription fees or setup
charges to use GPS.
GPS
GPS GPS
GPS
About satellite signals
Your unit must acquire satellite signals
to operate. If you are indoors, near
tall buildings or trees, or in a parking
garage, the unit cannot acquire satel-
lites.
Acquiring satellite signals
Before the unit can determine your cur-
rent position and navigate a route, you
must do the following steps:
1. Go outside to an area free from tall
obstructions.
2.
Turn on the unit.
Acquiring satellite signals can take a
few minutes.
Initial navigation screen
After the ignition switch is placed in the
ACC or ON position, when you enter
a navigation mode for the first time,
the caution screen is displayed on the
screen. Read the caution carefully and
then touch [Agree].
Note
To change navigation system language,
select [Language].
(Page 17)
Indicators of the map screen
How to view a map screen
The navigation system displays various
information on the screen.
• /
Indicates the direction of the map.
Touch to switch the orientation of the
map.
•
Indicates current vehicle position and
direction of travel.
•
Select to access the map menu.
•
Indicates the scale of the map.
22
Getting started with navigation
23
•
Indicates the arriving time, distance
and remaining time to the destina-
tion.
•
Appears on the upper right corner of
the screen when a route is set.
Indicates the distance to the next
guide point and the turning direction
at that guide point.
•
Indicates the speed limit on the road
that you’re driving now.
Changing the scale of a map
1. Touch on the map screen.
2. Select [+] to zoom in.
Select [-} to zoom out.
50 m n 100 m n 200 m n 300
m n 500 m n 750 m n 1 km n
2 km n 5 km n 10 km n 20 km
n 50 km n 100 km n 200 km n
500 km
3. If you want to set the auto zoom,
touch .
Adjusting the navigation vol-
ume
To adjust the navigation volume, follow
one of the described methods below:
Method 1
Rotate the volume knob (VOLUME) on
the control panel or press the volume
(VOL+/VOL-) on the steering wheel
remote control during the voice guidance.
,
During
the voice
guidance
Method 2
If you want to adjust the navigation vol-
ume, rotate the volume knob (VOLUME)
on the control panel or press the volume
(VOL+/VOL-) on the steering wheel
remote control during the voice guidance
after pressing on the control panel.
During
the voice
guidance
,,
Note
No responsibility is acceptted for the
correctness of the speed limit informa-
tion provided by the navigation system;
it may not always reflect the currently
valid regulations. Always observe the
applicable legal speed limits the traffic
regulations. The vehicle speedometer
must always be given priority for display
of the vehicle speed.
Getting started with navigation
Navigation menu overview
Navigation menu
Address
Last destinations
Address book
POI
Parking
Continue guidance/
Stop guidance
GPS input
Using map
Tour planner
Store destination
Store position
Home 1
Work 2
3 ~ 12
Favourites
Advanced
Navigation
General operations of desti-
nation menu
1. Turn the unit on.
2. Press NAV on the control panel. The
navigation menu appears on the
screen.
3. Touch [Navigation], [Advanced] or
[Favourites] to select the desired
option.
[Advanced] menu
[Favourites] menu
4. Touch the preferred setting method.
• Address: finds a destination by
setting an address. (Page 25)
• Last destinations: sets a destina-
tion from last destinations you
have set. (Page 26)
• Address book: sets a destination
to a location stored in the Address
book. (Page 26)
• POI: searches for a destination
from various categories. (Page
26-28)
• Parking: sets a parking as your
destination. (Page 30)
• Continue/Stop guidance: sets
guidance On/Off. (Page 30)
• GPS input: sets a latitude and
a longitude as your destination.
(Page 29)
• Using map: searches for a destina-
tion by scrolling the map. (Page 30)
• Tour planner: adds new tours or
loads saved tours. (Page 31-32)
• Store destination: stores your destina-
tion in the Address book. (Page 33)
• Store position: stores your position
in the Address book. (Page 33)
•
Home 1/Work 2/3 ~ 12: stores home,
work, and other locations you travel to
most often. (Page 34-35)
24
Destination input menu
25
Address Search
You can find a destination by inputting
an address.
1. Press [NAV] > Touch [Address].
2. Set the preferred country.
If the country has already been set,
follow the step 3.
3. Set the preferred city name and
then touch [Ok].
4. Select the desired city from the list.
5. Input the street name and select
[Ok].
6. Select the desired street from the list.
7. Input the house number and select
[Ok].
8. Set the route options and then
touch [Ok].
Refer to the “Route options” on the
page 39.
9. Touch [Start].
• To store your destination to the
Address book, select [Store]. Then
input its name and select [Ok].
• To view the map of your destina-
tion, select [Show map] and then
[Start].
10. Touch the preferred route, then
touch [Start]. Refer to the Note
regarding route criteria on the page
39.
Drive in accordance with the screen
and voice information.
Destination input menu
26
Destination input menu
Last destinations
The destinations last used for guid-
ance are stored in the memory. Up to
50 last destinations are automatically
stored. If the number of last destina-
tions exceeds, the oldest destination is
replaced by the latest
1.
Press [NAV] > Touch [Last destina-
tions].
2. Touch the preferred last destination
from the list.
3. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
Address book
You can find the destination to a loca-
tion stored in the Address book. To uti-
lize this function more effectively, des-
tinations that you often travel to should
be stored in advance.
First of all, store in the Address book
by searching the address. Refer to the
Address Search on the page 25.
1. Press [NAV] > Touch [Address
book].
2. Touch the preferred destination from
the list.
3. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
POI (Point of Interest)
You can find a destination from various
categories.
1. Press [NAV] > Touch [POI].
2. Touch one of the main category.
• Near position: finds POI near cur-
rent vehicle position. (Page 27)
• Near destination: finds POI near
selected destination. (Page 28)
• In City: finds POI located in the
city. (Page 28)
• Name: finds POI by the name of
the facility. (Page 28)
• Hyundai service: finds facilities of
Hyundai service.
(Page 28)
• Phone number: finds POI by
entering its phone number. (Page
28)
27
Near position
1. Press [NAV] > Touch [POI] > [Near
position].
2. Select one of the categories.
(For example: Emergency)
3. Select one of the subcategories. (For
example: Hospital)
4. Touch the preferred POI.
5. Touch [Ok] after confirming the
location of the displayed POI.
If you want to call on the telephone,
touch [ ]. This function is available
only when a Bluetooth phone is con-
nected.
6. Touch [Start].
7. Touch the preferred route.
8. Touch [Start].
Drive in accordance with the screen
and voice information.
Destination input menu
Near destination
1. Press [NAV] > Touch [POI] > [Near
destination].
2. Follow steps 2-8 on the page 27
(Near position).
In City
1. Press [NAV] > Touch [POI] > [In City].
2. Input the city and select [Ok].
3. Touch the city in the list.
4. Follow steps 2-8 on the page 27
(Near position).
Name
1. Press [NAV] > Touch [POI] > [Name].
2. Set the preferred country.
3. Input the POI name and select [Ok].
4. Follow steps 4-8 on the page 27
(Near position).
Hyundai service
1. Press [NAV] > Touch [POI] > [Hyundai
service].
2. Follow steps 4-8 on the page 27
(Near position).
Note
The information of position may dif-
fer from actual location due to some
changes of dealership and dealer loca-
tion information.
Phone number
1. Press [NAV] > Touch [POI] > [Phone
number].
2. Input the phone number and then
touch [Ok].
3. Touch the preferred phone number
from the list.
4. Touch [Ok] after confirming the
location of the displayed POI.
If you want to call on the telephone,
touch [ ]. This function is available
only when a Bluetooth phone is con-
nected.
5. Follow steps 6-8 on the page 27
(Near position).
28
Destination input menu
29
GPS input
You can find a destination by inputting
the coordinates of latitude and longi-
tude.
1. Press [NAV] > Touch [Advanced] >
[GPS input].
2. Touch [Latitude].
3. Input the degree of the latitude
coordinate. (For example: 49)
4. Input the minute of the latitude
coordinate. (For example: 58’)
5. Input the second of the latitude
coordinate. (For example: 29’’)
6. Touch [Ok].
7. Input the coordinate of the longi-
tude.
Refer to the steps 2-6.
(For example: 8, 42’, 31’’)
8. When the settings are completed,
touch [Start].
9. Follow steps 7-8 on the page 27
(Near position).
Note
If you make a mistake while touching,
touch to erase one digit at a time.
Destination input menu
Parking
You can find a destination by searching
for parking facilites.
1. Press [NAV] > Touch [Parking].
2. Touch a preferred facility.
3. Follow steps 4-8 on the page 27
(Near position).
Continue guidance/Stop
guidance
If you no longer need to travel to your
destination or if you want to change
your destination, press [NAV] > touch
[Stop guidance]. If you want to continue
travelling to your destination, select
[Continue guidance].
Using map
This allows you to search for a destina-
tion by scrolling over the map.
1. Press [NAV] > Touch [Advanced] >
[Using map].
2. Scroll over the map and place the
cross pointer over the preffered
location.
3. Touch [Start].
4. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
30
Destination input menu
31
Tour planner
The Tour planner allows you to travel
through the searched routes by setting
a destination or way point.
You can enter a total of 4 destinations
or way points.
- New tour: sets a tour.
- Load tour: displays the tour lists.
- Show tour: displays tour list that was
last set.
Setting a tour
1. Press [NAV] > Touch [Advanced] >
[Tour planner].
2. Touch [New tour].
3. Touch [Yes].
4. Set a destination by using the navi-
gation menu.
(Refer to the page 24.)
The destination you set is displayed.
5. Touch [Add tourpoint].
6. Set a way point by using the
[Navigation], [Advanced], and
[Favourites] menu.
(Refer to the page 24.)
If you need an additional way point, set
it by touching [Add tourpoint] again.
7. Touch [Start].
If you would like to save the
searched routes, touch [Yes].
Otherwise, touch [No].
8. Input a name, then touch [Ok].
The searched routes are stored in
the [Load tour] automatically.
9. Drive in accordance with the screen
and voice information.
Destination input menu
Editing/deleting a destination or way
point
You can modify or delete set destina-
tions or way points.
1. Press [NAV] > Touch [Advanced] >
[Tour planner] > [Load tour].
2. Touch the desired tour list.
3. Touch [Edit tour list].
4. Touch the desired options.
[Tourlist sort]: changes the order of
the set destinations
and way points. (Follow
Steps 5-6)
[Tourpoint delete]: deletes way
points. (Follow
Steps 7-9)
[Tourlist delete]: deletes tour list.
(Follow Steps 10-11)
5. Touch [Tourlist sort] and then touch
[Ok] after changing the order.
6. Follow steps 7-9 on the page 31
(Setting a tour).
7. Touch [Tourpoint delete] to delete
the way point.
8. Touch the desired way point.
9. Follow steps 7-9 on the page 31
(Setting a tour).
10. Touch [Tourlist delete] to delete the
tour list you set.
11. Touch the desired tour list.
32
Destination input menu
33
Store destination
Destinations that you visit frequently
can be stored in the Address book.
They can be easily retrieved to be used
again.
This is available only when a destination
has been set.
1. Press [NAV] > Touch [Advanced] >
[Store destination].
2. Input the name of the destination
then touch [Ok].
The destination is stored in the
Address book automatically. (Page
26)
Store position
The current vehicle position can be
stored in the Address book.
1. Press [NAV] > Touch [Advanced] >
[Store position].
2. Input the name of the current posi-
tion then touch [Ok].
The current vehicle position is stored
in the Address book automatically.
(Page 26)
Destination input menu
Home 1/Work 2/3 ~ 12
Storing your home by using the
Address book
Routes to your home, work, and other
favourite locations can be easily
retrieved if they are already stored in the
Address book.
1. Press [NAV] > Touch [Address
book].
2. Touch after confirming the pre-
ferred location.
3. Touch [Favourites].
4. If you want to set the location to
your home, touch [1 Home].
5. Touch [Ok].
Note
• The procedure to store your work and
other favourite locations is similar as in
storing your home location.
• New information placed in the same
storage position overwrites the old data.
• If you want to delete the location
stored in the Address book, touch
[Delete].
Storing your home by using the
[Favourites] menu
1. Press [NAV] > Touch [Favourites].
2. Touch and hold the preferred
number.
[Favourites] menu
3. Set your home by using the
[Navigation] and [Advanced] menu.
(Refer to the page 24.)
Your entry is stored in the preferred
number.
34
Destination input menu
35
Finding your home
1. Press [NAV] > Touch [Favourites].
2. Touch [Home 1].
3. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
Note
The procedure to find your work and
other favourite locations is similiar as in
finding your home location.
Destination input menu
36
Map menu overview
Map menu
Store position
Route options
Tour planner
Browser
Detour
Route
POI category
2D /3D
Info on route
Manoeuvre
Full screen
View
Traffic Info nearby
Info on route
General operations of map
menu
1. Turn the unit on.
2. Press MAP to display the map.
3. Touch [Menu].
4. Touch [View], [Route] or [Traffic] to
select the desired option.
[View] menu
[Route] menu
[Traffic] menu
5. Touch the preferred setting method.
For details, refer to the page 37-42.
Using the map menu
37
POI category
Some landmarks in the surrounding
area can be displayed as icons on the
screen.
This function allows you to display or
hide the landmark icons.
1. Press [MAP] > Touch [Menu] >
[View] > [POI category].
2. Touch the desired icons.
The icon display settings toggle on
and off each time you touch the
icon. The indicator of the selected
icon illuminates.
3. Touch [Ok].
The activated landmark icons are
displayed on the map.
2D/3D
The map can be viewed in 2D or 3D.
- 2D: displays the map in a 2-dimen-
sional environment similar to a
road map.
- 3D: displays the view from an elevated
perspective. It is easy to recognize
an image of the route because it
provides a panoramic view over a
long distance.
1. Press [MAP] > Touch [Menu] >
[View] > [2D/3D].
2. Touch [2D/3D] again to switch to
the 2D screen.
Using the map menu
Info on route/Full screen
When the route guidance is active, the
turn list is displayed on the right side in
split screen mode.
The map view can be changed between
turn list and full screen.
1. Press [MAP] > Touch [Menu] >
[View] > [Info on route].
2. To switch to the full screen mode,
touch [Menu] > [View] > [Full screen].
Full screen
Manoeuvre/Full screen
When the route guidance is active, the
manoeuvre is displayed on the right
side in split screen mode.
The map view can be changed between
manoeuvre and full screen.
1. Press [MAP] > Touch [Menu] >
[View] > [Manoeuvre].
2. To switch to the full screen mode,
touch [Menu] > [View] > [Full screen].
Full screen
Store position
The current vehicle position can be
stored in the Address book.
1. Press [MAP] > Touch [Menu] >
[Route] > [Store position].
2. Input the name of the current posi-
tion then touch [Ok].
The current vehicle position is stored
in the Address book automatically.
(Page 26)
38
Using the map menu
39
Tour planner
The Tour planner allows you to travel
through the searched routes by setting
a destination or way point.
1. Press [MAP] > Touch [Menu] >
[Route] > [Tour planner].
2. Refer to “Tour planner” on the
pages 31-32.
Route options
You can modify the route conditions or
confirm the route information. Set the
appropriate route condition according
to your purpose.
1. Press [MAP] > Touch [Menu] >
[Route] > [Route options].
2. Touch the preferred setting item.
• Route: if you don’t set the [Plan
different routes] in the
setup menu, set the route
option to fast ( ), short
() or eco ( ).
Note
• Fast Route: calculates a route with
the shortest travel time.
• Short Route: calculates a route
with the shortest distance.
• Eco (Economical) Route:
- To save fuel consumption, this
route considers to reduce the
number of frequent stop&go
route at the intersection and turn-
ing point based on fuel consump-
tion table with real time traffic
information, however this route
may not be valid in terms of driv-
ing conditions such as sudden
acceleration.
- Eco Route might have more driv-
ing time and distance to save fuel
consumption.
• TMC:
- auto ( ): a detour is calculated
automatically without
any announcement
when a TMC event on
route is found.
- off ( ): switches off the TMC
function.
- on ( ): a detour is calculated
manually when a TMC
event on route is found
(pop-up screen appears
for selection)
Note
A pay TMC is not supported.
Using the map menu
• Toll Road ( )
- use: includes toll roads.
- avoid: avoids toll roads.
• Tunnel ( )
- use: includes the use of tunnels.
- avoid: avoids tunnels.
• Main Road ( )
- use: includes main roads.
- avoid: avoids main roads.
• Ferry ( )
- use: includes the use of ferries.
- avoid: avoids ferries.
3. Press [Ok].
When the current location map
screen or route setting screen is
displayed, the system recalculates a
route with the set conditions.
Note
• Always stop the vehicle in a safe loca-
tion before modifying route conditions.
• Modifying the route conditions while
driving may cause an accident.
Browser
An enlarged view of route sections can
be displayed when the route guidance
is active.
1. Press [MAP] > Touch [Menu] >
[Route] > [Browser].
2. Select [Previous] or [Next] to browse
through route sections.
3. Select [Section] to display an
enlarged view of a particular route
section.
4. Select [Route] to return to route
overview.
5. Select to return to current vehi-
cle position.
Detour
If you want to make a detour due to
traffic conditions, you can use the
detour function to calculate an alterna-
tive route from the current vehicle posi-
tion to the destination.
1. Press [MAP] > Touch [Menu] >
[Route] > [Detour].
2. Touch [Shorter] or [Longer] to set
a route which take a detour as the
distance you select.
- Blue: original route
- Red: detour route
3. Touch [Start].
40
Using the map menu
41
4. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
Note
If you do not need to take a detour
when are navigating through a route,
select [Menu] > [Route] > [Detour] >
[Delete].
Info nearby
The list of traffic information around the
current vehicle position is displayed.
1. Press [MAP] > Touch [Menu] >
[Traffic] > [Info nearby].
2. Touch the desired option to check
the detailed information.
3. Touch [Show map] after checking it.
4. Touch [Zoom+] to view the map in
detail. Touch [Zoom-] to view the
map a wider area.
5. Touch to return to the previous
screen. Press MAP to return to the
current location map screen.
Checking the TMC event on the map
screen
1. Touch the displayed TMC icon on
the map screen.
2. Touch the desired option to check
the detailed information.
3. Follow steps 3-4 on the page 41
(Info nearby).
Using the map menu
Info on route
The list of traffic information found on
the recommended route from the cur-
rent vehicle position to the destination
is displayed.
A detour route to avoid the event is
searched from the current vehicle posi-
tion to the destination. Also, you can
check the detailed information about
the displayed events.
1. Press [MAP] > Touch [Menu] >
[Traffic] > [Info on route].
2. Touch the desired option to check
the detailed information.
3. If you need to take a detour, touch
[Detour].
Note
Touch [Show map], if you want to
view the position about the event
found on the route. Touch to
return to the previous screen. Press
MAP to return to the current loca-
tion map screen.
4. Touch the preferred route.
5. Touch [Start].
Drive in accordance with the screen
and voice information.
Checking the TMC event on the map
screen
1. Touch the displayed TMC icon on
the map screen.
2. Touch the desired option to check
the detailed information.
3. Follow steps 3-5 on the page 42
(Info on route).
42
Using the map menu
43
Understanding Bluetooth
wireless technology
Bluetooth wireless technology establish-
es a wireless link between two devices
supported with Bluetooth.
The first time you use two devices
together you must pair them by estab-
lishing a connection using a Passkey.
After the initial pairing, the two devices
can connect automatically each time
you turn them on.
Note
• There may be restrictions on using
Bluetooth technology in some loca-
tions.
• Due to the variety of Bluetooth devices
and their firmware versions, your
device may respond differently when
performing over Bluetooth.
• Any inquiries regrading your phone's
Bluetooth functionality, refer to the
device manual.
• You can check the Bluetooth phone
compatibility list on the web-site
(http://www.navigation.com/hyundai).
Connecting the unit and a
device
To connect using the unit settings (1)
1. Press on the control panel.
2. Touch [Bluetooth].
3. Touch [Search for Bluetooth devic-
es].
If you want to cancel, touch
[Cancel].
4. Select the desired Bluetooth phone
from the "Bluetooth devices" screen.
5. Input the passkey (presented by
unit, default: 0000) to your phone.
When it is successfully connected,
the Bluetooth main screen appears
on the screen.
When it is not connected, the con-
nection failure message appears on
the screen.
Bluetooth wireless technology
y
44
Bluetooth wireless technology
To connect using the unit
settings (2)
1. Press on the control panel.
2. Press [Search for Bluetooth devices].
3. Follow steps 4-5 on the page 43.
To connect using the device settings
To use the Bluetooth feature, make sure
the Bluetooth on your phone is turned
on. Refer to your phone’s user guide.
1. Turn on the phone's Bluetooth.
2. Press [ ] > Touch [Bluetooth] >
[External device authorization].
If you want to cancel, touch [Cancel].
3. In your phone, initiate a search for
Bluetooth devices.
4. After search is completed in your
phone, select "Veloster".
5. Input the passkey (presented by unit,
default: 0000) to your phone.
When your phone is successfully
connected, the phone main screen is
displayed on the unit.
When the connection fails, failure
message is displayed on the unit.
45
Bluetooth wireless technology
Viewing the connected device
1. Touch [View Bluetooth device list] on
the “Bluetooth” screen.
2. Check the connected device on the
"Bluetooth devices" screen.
The connected phone is highlighted
by .
mark indicates hands-free and audio
streaming functions are enabled.
mark indicates only hands-free function
is enabled.
Disconnecting the bluetooth
phone
1. Press [ ] > Select [Bluetooth].
2. Touch [View Bluetooth device list] on
the “Bluetooth” Screen.
3. Select the connected phone. And
then touch [Yes].
Your phone is disconnected and the
mark disappears.
Connecting the bluetooth
phone
1. Press [ ] > Select [Bluetooth].
2. Touch [View Bluetooth device list] on
the “Bluetooth” Screen.
3. Select the desired phone and confirm
connection by selecting [Yes].
The mark appears again.
46
Bluetooth wireless technology
Deleting a connected phone
If you no longer need to use a phone,
you can delete it from [Bluetooth devic-
es] List.
1. Press [ ] > Select [Bluetooth].
2. Touch [View Bluetooth device list] on
the “Bluetooth” screen.
3. Select mark on the right side of the
phone you wish to delete.
4. Touch [Yes].
The selected phone is now deleted.
Changing the passkey
1. Press [ ] > Select [Bluetooth] >
[Change passkey].
2. Input the passkey using the keypad.
3. Touch [Ok].
Making a call by entering
phone number
Connect your unit and Bluetooth phone
before making a call.
1. Press the button on the control
panel.
The phone main screen is displayed
on the unit.
2. Enter the phone number using the
keypad and select .
3. To finish the call, select [Hang up].
Note
• If you make a mistake, press shortly
to remove the last digit. To remove the
whole number, press and hold .
• Select and hold to redial.
• To enter "+", select and hold [0].
Transfer a call
To transfer a call between the unit
and your phone, select [Transfer call]/
[Transfer call back].
Switching the microphone on/
off
You can switch the microphone on/off by
touching [Microphone off]/[Microphone
on].
47
Bluetooth wireless technology
Answering calls
1. When you receive a call, your phone
rings and the “Incoming Call” win-
dow is displayed on the unit.
2. Touch [Accept] to answer the call.
To reject a call, select [Refuse].
Note
• If the Call-ID service is available, the
caller’s phone number is displayed.
• If caller's phone number is stored in
the phone book, the caller's name is
displayed on the unit.
Using your Phone Book
The unit can download calling list from
phones supporting PBAP (Phone Book
Acces Profile).
During every connection, the unit down-
loads the calling lists from your phone.
This process may take up to one min-
ute.
Calling a number from phone book
1. Press on the control panel. And
then touch [Phonebook].
2. Select the phone book entry you
want to call.
You can scroll over the phone book
by selecting or .
3. To finish the call, select [Hang up].
Searching for phone book entries
1. Touch [Search by name] on the
“Phone book” screen.
2. Enter the first letters of the searched
name by using the keypad. The
number on the right side of the text-
box indicates how many phone book
contacts match your entry. Press
[Ok] to see the list of matching con-
tacts.
48
Bluetooth wireless technology
3. Select the contact you want to call.
You can scroll over the list by select-
ing or .
4. To finish the call, select [Hang up].
Using your Calling list
The unit can download calling list from
phones supporting PBAP (Phone Book
Acces Profile).
During every connection, the unit down-
loads the calling lists from your phone.
This process may take up to one min-
ute.
Calling a number from a calling list
1. Press on the control panel. And
then touch [Calling lists].
2. Touch [Outgoing], [Missed], or
[Incoming].
Outgoing calls
Missed calls
Incoming calls
3. Touch the entry you want to call.
4. To finish the call, select [Hang up].
49
Bluetooth wireless technology
Making a call with speed dial
numbers
You can assign up to 12 speed dial
numbers from phone book or calling
lists.
Assigning phone numbers to the
speed dial list
1. Press on the control panel, then
select [Speed dial].
2. Touch and hold one of speed dial
numbers (1-12). (For example: 1)
You can switch between speed dial
pages by touching or .
3. Select one of the categories.
(For example: Phone book)
4. Select the entry you want to assign
to speed dial number.
5. Enter the name by using the keypad,
then touch [Ok].
The entry is now assigned to the
speed dial number.
Calling a number from the speed
dial list
1. Press on the control panel, then
select [Speed dial].
2. Select one of the speed dial num-
bers to make a call.
3. To finish the call, select [Hang up].
50
aaa
Bluetooth wireless technology
Activating the audio stream-
ing mode
Connect the unit and your phone before
activating the audio streaming mode.
(Pages 43 - 44)
Press MEDIA repeatedly until "BT"
appears on the screen.
Note
If the track information (title, artist,
album) is not transferred by your phone,
the appears on the screen.
Skipping the tracks
Touch / to select the previous/next
track.
Fast Forward/Rewind
Select and hold the to rewind. Select
and hold to fast forward.
Note
• The unit may not support the audio
streaming function depending on the
type of the phone.
• If you disconnect your unit and the
Bluetooth device, the music is not
played on the device.
51
CD/MP3/WMA/USB/iPod operation
Playing an audio CD and
MP3/WMA/USB/iPod files
Disc
Insert a disc into the disc slot and play-
back will start automatically.
Audio CD
MP3/WMA CD
USB
You can play the files recorded in a USB
memory device.
Connect a USB device to the USB port
and playback starts automatically.
iPod
You can play an iPod device on the unit
by connecting the iPod to the USB port
by using the iPod cable.
Connect an iPod device to the USB
port and playback starts automatically.
For details about iPod, refer to the iPod
User Guide.
Note
• You can play 12-cm audio CDs on your
CD player. We strongly recommend
only playing 12-cm CDs. Please do not
play 8-cm CDs (neither with nor with-
out an adapter).
• On no account must designer (unusu-
ally shaped) CDs be inserted into the
drives. If you ignore these recommen-
dations, you risk damaging your unit.
• The system may not be able to play
copy-protected audio CDs, which do
not correspond to the audio CD stan-
dard or play them properly.
• We strongly recommend only using
USB sticks (thumb drives) of well-
known manufacturers.
• On no account must other USB devic-
es such as hard discs or other digital
equipment be connected to the USB
hub. Connecting other devices can
cause malfunction or even destroy the
audio equipment.
52
CD/MP3/WMA/USB/iPod operation
Skipping to the next track/file
ALL
Touch to select the next track/file.
Skipping to the previous track/file
ALL
Touch within 1 second of playback
time.
Returning to the beginning of the
current track/file
ALL
Touch after 1 second of playback
time.
Search
ALL
Touch and hold the or buttons
during playback and then release at the
point you want.
Intro scanning
Disc - Audio CD USB
Disc - MP3/WMA
The first 10 seconds of each tracks/files
are played.
1. Touch [Option] during playback.
Example: audio CD
2. Touch [Scan start].
3. Touch [Scan stop] to cancel the intro
scan.
Repeat function
ALL
The currently selected track/file is
played repeatedly.
1. Touch [Option] during playback.
Example: audio CD
2. Touch [Repeat] repeatedly.
Disc - Audio CD
• [Repeat off]: plays repeatedly all
tracks within the disc.
• [Repeat track]: plays repeatedly the
current track.
53
CD/MP3/WMA/USB/iPod operation
USB Disc - MP3/WMA
• [Repeat off]: plays repeatedly all
files within the disc or
USB.
• [Repeat track]: plays repeatedly the
current file.
• [Repeat folder]: plays repeatedly all
files within the cur-
rent folder.
iPod
• [Repeat off]: plays repeatedly all
files within the iPod.
• [Repeat on]: plays repeatedly the
current file.
Random function
ALL
All tracks/files are played randomly.
1. T
ouch [Option] during playback.
2. Touch [Random] repeatedly.
Disc - Audio CD
• [Random all]: plays randomly all
files within the disc.
• [Random off]: cancels Random
play.
USB Disc - MP3/WMA
• [Random off]: cancels random play-
back.
• [Random folder]: the unit plays ran-
domly within cur-
rent folder.
• [Random all]: the unit plays ran-
domly all files within
the disc or USB.
iPod
• [Random off]: cancels Random
play.
• [Random all]: the unit plays ran-
domly all files within
the iPod.
• [Random album]: the unit plays
randomly all files
within current
album.
54
CD/MP3/WMA/USB/iPod operation
Playing files by classifying
into folder/Album/Artist
USB
You can play files in a USB according to
the folders, albums, or artists.
1. Touch [Option] during playback.
2. Touch [Folder], [Album], or [Artist]
during playback.
• [Folder]: plays the files by classifying
into folder.
• [Album]: plays the files by classify-
ing into album.
• [Artist]: plays the files by classifying
into artist.
Note
If you want to move to the playlist
screen, touch .
Browsing through folders/files
using (the) "List" menu
Disc - Audio CD USB
Disc - MP3/WMA
You can listen to music by displaying the
track/folder/file list.
1. Touch the [List] button during play-
back.
Example: audio CD
2. In case of Audio CD, touch the file
you want.
In case of MP3/WMA file, select the
folder you want. If there is no folder,
select the file.
Audio CD MP3/WMA file
3. The selected track/file is played.
Note
• In case of MP3/WMA file, touch the
button to move to upper folder.
• Touch the or buttons to select
the list you want to view.
• If you want to move to the playlist
screen, touch .
Searching music
iPod
You can search within iPod for playlists,
artists, albums, Genres, songs, compos-
ers, audio books, and podcasts.
For details about iPod, refer to the iPod
User Guide.
1. Touch [List] during playback.
2. Touch the desired item.
55
CD/MP3/WMA/USB/iPod operation
• [Playlists]: plays the songs in the
[Playlists].
• [Artists]: plays the songs in the
[Artists].
• [Albums]: plays the songs in the
[Albums].
• [Genres]: plays the songs in the
[Genres].
• [Songs]: plays the songs in the
[Songs].
• [Composers]: plays the songs in the
[Composers].
• [Audiobooks]: plays the songs/
chapters in the
[Audiobooks].
• [Podcasts]: plays the songs/chapters
in the [Podcasts].
Note
• If you want to move to upper folder,
touch .
• Touch the or buttons to select
the list you want to view.
• If you want to move to the playlist
screen, touch .
Setting audio books playback
speed
iPod
Setting the playback speed only affects
audio books purchased from the iTunes
store or audible.com.
For details about iPod, refer to the iPod
User Guide.
1. Touch [Option] when you listen to
songs/chapters in the [Audiobook].
2. Touch [Audiobook] repeatedly.
• [Audiobook normal]:
plays the audio books with original
speed.
• [Audiobook fast]:
plays the audio books with fast
speed.
• [Audiobook slow]:
plays the audio books with slow
speed.
Note
If you want to move to the playlist
screen, touch .
56
CD/MP3/WMA/USB/iPod operation
USB device requirement
• This unit supports only USB Flash Drive
and USB External HDD with FAT16 or
FAT32 format.
• Do not extract the USB device during
operation (play, etc.).
• Regular back up is recommended to
prevent data loss.
• If you use an USB extension cable or
USB HUB, the USB device may not be
recognized.
• Some USB devices may not work with
this unit.
• Digital camera and mobile phone are
not supported.
• This unit is not supported when the total
number of files is 10000 or more.
Compatible USB devices
• Devices which require additional pro-
gram installation when you have con-
nected it to a computer, are not sup-
ported.
• MP3 player: flash type MP3 player
The MP3 player requiring installation of
a driver is not supported.
• USB Flash Drive: devices that support
USB2.0 or USB1.1 .
• You can check the USB compatibility list
on the web-site (http://www.navigation.
com/hyundai).
MP3/WMA file requirement
• Sampling Frequency /16 - 48 kHz
(MP3) 8 - 44.1 kHz (WMA)
• Bit rate /within 8 - 320 kbps (MP3)
5 -160 kbps (WMA)
• CD-R/CD-RW physical format should
be “ISO 9660”
• If you record MP3/WMA files using
software which cannot create a FILE
SYSTEM, for example “Direct-CD”
etc., it will not be possible to playback
MP3/WMA files.
We recommend that you use “Easy-
CD Creator” which creates an
ISO9660 file system.
Customers should also note that
permission is required in order to
download MP3/WMA files and music
from the Internet. Our company has
no right to grant such permission.
Permission should always be sought
from the copyright owner.
iPod device requirement
• Compatibility with your iPod may vary
depending on the type of your iPod.
• Depending on your iPod’s software ver-
sion, it may not be possible to control
your iPod from this unit. We recommend
installing the latest software version.
• If you have a problem with your iPod,
please visit www.apple.com/support/
ipod.
• This system can receive analog sound
from the following iPod models.
- iPod touch 1th generation
- iPod mini (1st/2th generation)
- iPod nano (1st/3th generation)
- iPod classic (4st/5th/6th generation)
- iPhone (3G/3GS/4)
• If content on the iPod is not played back
correctly, update your iPod software
to the latest version. For details about
updating the iPod, check the Apple web
site <http://www.apple. com>.
• Apple is not responsible for the opera-
tion of this device or its compliance with
safety and regulatory standards.
57
Radio operation
Listening to stations
1. Press the “FM/AM” button to select
the radio.
2. Press the “FM/AM” repeatedly to
select a band.
The mode switches as follows.
FM t AM t FM...
Note
To select the FM/AM by touching the
screen, touch on the screen to
select the AM and then touch .
3. Auto tuning:
touch / on the screen. Or press
ASEEK/TRACKD on the control
panel.
- When a station is received, search-
ing stops.
Manual tuning:
rotate the Jog dial leftward/rightward
on the control panel.
- The frequencies move up and
down step by step.
Storing and recalling stations
You can easily store up to 12 preset sta-
tions for later recall at the touch of a
button.
1. Select the band (FM, AM) you want to
store a station into.
2. Select the desired frequency.
3. Touch [Presets] on the screen.
4. Touch and hold one of the preset but-
tons.
The preset station information will be
displayed.
The selected preset station has been
stored in memory.
If you move to the previous/next page,
touch / .
5. Repeat steps 1 and 4 to preset other
stations.
Next time if you select the preset but-
ton, stations are recalled from the
memory
Note
When station is preset on a number of
which another station has already been
preset, the previously preset station is
erased.
58
AS (Autostore)
This is only available for AM reception.
This function lets you automatically
store the strong broadcast frequencies.
1. Select the band to AM.
2. Touch [Option] on the screen.
3. Touch [Autostore] on the screen.
Local stations with the strong
signals are searched and stored
automatically in the list menu. And
then the list menu appears on the
screen.
4. Touch the broadcast frequency you
want.
Scanning broadcast frequen-
cies
The first 10 seconds of each broadcast
frequency are played.
1. Touch [Option] on the screen in
AM/FM mode.
2. Touch [Scan start] on the screen.
3. Touch [Scan stop] to cancel it.
TA (Traffic announcement)
TA function allows the unit to switch
to traffic announcement (TA) from the
current source (Another FM station, CD,
or other connected components).
1. Touch [Option] on the screen in
AM/FM mode.
2. Touch [TA off]/[TA on] on the
screen.
[TA on]: traffic programs and
announcements can be
automatically received
using TP/TA features.
[TA off]: traffic programs and
announcements cannot be
received.
Radio operation
59
Radio operation
NEWS
This function allows the unit to switch to
news from the current source (Another
FM station, CD, or other connected
components).
1. Touch [Option] on the screen in AM/
FM mode.
2. Touch [News off]/[News on] on the
screen.
[News on]: news can be automati-
cally received.
[News off]: news can not be
received.
Region auto/off function
This is only available for FM reception.
1. Select the band to FM.
2. Touch [Option] on the screen.
3. Touch [Region auto]/[Region off] on
the screen.
[Region auto]:
the unit switches to another station,
within the same network, broadcast-
ing the same program when the
receiving signals from the current
station become weak.
[Region off]:
the unit switches to another station,
within the same network when the
receiving signals from the current
station become weak. (In this mode,
the program may differ from the one
currently received.)
60
Auxiliary device operation
y
Using an AUX source
It is possible to use auxiliary equipment
with unit.
1. Press “MEDIA” until “AUX” screen
appears.
AUX Audio
AUX Video
2. Connect an auxiliary device to the
AUX connector, then activate the
auxiliary function.
Note
• Some auxiliary devices that do not have
the video source may not produce output
to the video screen.
• In case of some iPod devices, Use the
iPod cable for exclusive use of iPod for
video playback when connecting iPod
to the AUX connector.
• Video is not available while driving.
(Based on the traffic regulation, Aux
Video is only available whenever vehicle
is in stop condition with parking brake.)
Adjusting the video screen
(Default: Center)
For safety reasons, the video screen
cannot be viewed while your vehicle is in
motion. To view video screen, you must
stop in a safe place and put on the
handbrake.
1. Touch the screen on the aux video
mode.
2. Touch “Option” on the screen.
3. Select the item you want to adjust.
- Brightness: touch or to adjust
the brightness of screen.
- Contrast: touch or to adjust
the contrast of screen.
- Saturation: touch or to adjust
the saturation of screen.
Note
Touch [Center] to return to the default
settings.
61
Voice recognition system
Voice recognition
Voice recognition allows hands-free
operation of the AV system (RADIO,
CD, USB, iPod), navigation, and other
systems equipped on this vehicle, such
as phones.
Note
To get the best recognition perfor-
mance out of voice recognition, observe
the following:
• Keep the interior of the vehicle as
quiet as possible. Close the windows
to eliminate the surrounding noises
(traffic noises, vibration sounds, etc.),
which may prevent the system from
recognizing the voice commands cor-
rectly.
• Wait until a beep sounds before
speaking a command. Otherwise,
the command will not be recognized
properly.
• Speak in a natural voice without paus-
ing between words.
Giving voice commands
1. Press on the steering wheel
remote control.
2. After the beep sounds, say “Help”.
All commands shall be listed which
are presented in active fields.
Note
• If the command is not recognized, the
system announces first “Pardon?", then
the second time “Please, repeat”, and
the third time "Command is not recog-
nized".
• If you want to cancel the voice rec-
ognition, press one more time
or press any button or touch screen
menu which says "Cancel".
• If you want to adjust the volume of the
system feedback, press VOL+ or VOL-
on the steering wheel remote control
or use the volume knob (VOLUME) on
the control panel while the voice rec-
ognition is active.
How to say numbers
Voice recognition requires a certain
way to say numbers in voice com-
mands. Refer to the following examples.
(General rule: Either “zero” or “oh” can
be used for “0”.)
Frequency
Say frequency number according to the
following example.
“Frequency ninety five comma four”/“
Ninety five comma four mega-hertz”
Phone number
Say phone number according to the
following example.
0-1-0-2-0-0-5-2 (Single digit)
y
62
Voice recognition system
Voice command examples
To use the voice recognition function,
saying one command is sometimes
sufficient, but at other times it is neces-
sary to say two or more commands. As
examples, some additional basic opera-
tions by voice commands are described
here.
Example 1: Changing FM Radio &
Frequency
1. Press on the steering wheel
remote control.
2. After the beep sounds, say “FM”.
3. When the “FM” command rec-
ognized, the main screen will be
changed to the FM main screen.
4. Press on the steering wheel
remote control.
5. After the beep sounds, say
“Frequency one-hundred two” or
“one-hundred two mega hertz”.
6. When the spoken frequency is recog-
nized, the FM frequency is changed
to the 102 MHz.
Example 2: Changing playlist of
USB (CD)
1. Press on the steering wheel
remote control.
2. After the beep sounds, say “List”.
3. When the command is recognized,
the screen will be changed to USB
(CD) LIST screen.
4. Press , after the beep sounds,
you can say one of the playlist, for
example "micky green oh".
5. When the song selected is recog-
nized, it is played directly.
6. Press on the steering wheel
remote control.
7. After the beep sounds, say “Next
track” or “Previous track”.
8. When the command is recognized,
the next or previous song is played.
63
Voice recognition system
Example 3: Dialling a number
To use this function, you need a mobile
phone which supports Bluetooth.
Connect your unit and the phone
before using this function.
1. Press on the steering wheel
remote control.
2. After the beep sounds, say “Dial
Number”.
3. When the spoken command is rec-
ognized, the screen is changed to
the bluetooth main screen, and then
the system announces “Please say
the phone number”.
4. Say the phone number, for example
"01020052" (single digit)
5. When the spoken numbers are
recognized, the system announces
the recognized numbers and then
prompts "and then?"
6. If you want to make a call the recog-
nized number, say “Call”.
If there is unrecognized number or
you want to delete the number, say
“Clear”.
If you want to finish it at any time, say
“Cancel”.
Help command
If you are controlling the system by
voice commands for the first time or do
not know the appropriate voice com-
mand, say the following command.
1. Press on the steering wheel
remote control.
2. After the beep sounds, say “Help”.
All commands shall be listed which
are presented in active fields.
3. The voice feedback will announce
“Possible commands are”.
4. After the beep sounds, say “Other
commands”.
Application commands shall be listed
which are presented in active fields.
5. The voice feedback will announce
“Possible commands are”.
6. After the beep sounds, say “AUX”.
The screen is changed to the AUX
screen.
64
Voice recognition system
Voice commands
Category
Application
command
Voice command
AUX
CD
iPod
Map
Radio
USB
Bluetooth
Phone
Media
Category
General
functions
Voice command
Volume down
Volume up
Previous page
Next page
Help
Other commands
Cancel
No
Yes
Category
Radio
Voice command
News off
News on
Next station
Previous station
TA off
TA on
Preset <number>
Presets
AM
FM
List
Option
Scan start
Frequency “x” comma
“yy”
Frequency “xxxx”
Autostore
Region auto
Region off
Category
Phone
Voice command
Dial Number
Incoming
Missed
Outgoing
Phone Book
Call Name
Speed Dial <number>
Call
Calling lists
Speed dial
Mobile
Private
Office
Clear
Correction
Category
Bluetooth
media (A2DP)
Voice command
Next track
Previous track
65
Voice recognition system
Voice commands
Category
iPod
Voice command
Repeat off
Repeat on
Scan start
Random off
Random all
Random album
Audiobook slow
Audiobook normal
Audiobook fast
Directory up
List
Option
Next Track
Previous Track
Track Info
<Folder>
Track <Number>
Category
MP3
(CD, USB)
Voice command
Directory up
List
Option
Repeat folder
Repeat off
Repeat track
Scan start
Random all
Random folder
Random album
Random artist
Random off
Track info
Next track
Previous Track
<Folder>
Track <Number>
Album
Artist
Folder
Category
Audio CD
Voice command
List
Option
Repeat off
Repeat track
Scan start
Random all
Random off
Track info
Next track
Previous track
Track <Number>
Category
Navigation
Voice command
Navigation
66
Troubleshooting
Cannot identify current location. (GPS
not receiving)
GPS cannot be used indoors and must
be connected to a power source with
ACC in a vehicle in a location where the
signal from the satellite can be received
easily.
When initially connecting the GPS, it
usually takes about 10 minutes to be
working normally, but the connection
speed can differ depending on the
weather condition and surrounding
obstacles.
If the GPS connection is unstable for a
long period of time, try the following.
• Check if the product is connected to a
power source.
• Check if the back of the GPS product
is in a location where the sky can be
seen well.
• If there are high buildings or if you are
under a tree, move to a location where
there are no obstacles.
Cannot hear the voice guide.
The volume is not set correctly or turned
off. Adjust the volume of voice guidance.
There is a difference between the driv-
ing road and the road on the map in
the product.
Even though GPS is usually very accu-
rate, there is a small margin for error.
When the GPS receiver is installed,
there can be an error of about 10m. But
for newly built roads, the problem could
come from the data update to the map.
Cannot see the map.
Perhaps you cannot see the map even
when you have executed the navigation
menu.
This happens when the data within the
memory is damaged. Delete all the
data in the memory and install the data
again. If the issue persists after installa-
tion, contact the A/S center.
The path guide is different from the
actual path (path guide error)
• When the road is closely parallel.
• When the splitting road angle is very
small.
• When there is an adjacent road when
turning.
• When driving on a road that is narrow-
ing fast.
• When driving through mountains or
where the road is too curvy.
• When the starting, passing and arriv-
ing locations are too close within 1km.
• When you have set the starting, pass-
ing, or arriving locations more than
1km away from the road.
• When driving through tunnels.
Map matching
As mentioned, the GPS systems used
by this Navigation System are suscep-
tible to certain errors. Their calculations
may on occasion place you to a location
on the map where no road exists. In this
situation, the processing system under-
stands that vehicles travel only on roads,
and is able to correct your position by
adjusting it to a nearby road. This is
called map matching.
With map matching. With no map
matching.
How to update the navigation map and
software
To update the navigation map and soft-
ware, visit the site (http://www.naviga-
tion.com/hyundai).
67
Troubleshooting
Symptom Cause Correction
Power does not turn on.
The unit does not operate.
The ignition switch is NOT turned ON. Turn the ignition switch to ON.
The ignition switch is NOT set to ACC. Set the ignition switch to ACC.
The power of the unit is turned OFF. Turn the unit on by pressing POWER on
the control panel.
Noise and other factors are causing the
built-in microprocessor to operate
incorrectly.
Turn the unit off and then on.
The unit does not operate normally. You can reset the unit. Press the RESET
hole with a sharp object.
Playback is not possible. The disc is dirty. Clean disc.
The loaded disc is a type this unit
cannot play.
Check the type of the disc.
The disc is inserted upside down. Insert the disc with the label upward.
The fi les on the disc are an irregular
fi le format.
Check the fi le format.
There is no sound. The volume level is low. Adjust the volume.
The mute is on. Turn the mute off.
68
Index
Address book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Address Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
AS (Autostore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Bluetooth wireless technology . . . . . . . . . . . . . . . . . . . 43-50
Changing the passkey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Detour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Giving voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
GPS input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Help command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Home 1/Work 2/3 ~ 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
In City. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Info nearby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Info on route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Intro scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Hyundai service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Last destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Making a call by entering phone number . . . . . . . . . . . . . 46
Making a call with speed dial numbers . . . . . . . . . . . . . . . 49
Near destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Near position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
NEWS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Phone number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
POI category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
POI (Point of Interest) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Random function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Region auto/off function. . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Repeat function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Returning to the beginning of the current track/file . . . . 52
Route options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-21
Skipping to the next track/file . . . . . . . . . . . . . . . . . . . . . . 52
Skipping to the previous track/file . . . . . . . . . . . . . . . . . . . 52
Store destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Store position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33,38
Switching the microphone on/off. . . . . . . . . . . . . . . . . . . . 46
TA (Traffic announcement) . . . . . . . . . . . . . . . . . . . . . . . . 58
Tour planner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32, 39
2D/3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Transfer a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Using map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using your Phone Book . . . . . . . . . . . . . . . . . . . . . . . . 47-48
Using your Calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Voice commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65
Voice recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
69
If the traffic problem is on the calculated route, the symbol will be highlighted.
Symbol Description
Rock fall
Accident
Other danger
Narrowing road
Chipping
Road work
Slippery road, Rain
Symbol Description
Stationary traffic
Queuing traffic
Wind Storm
Snow, Ice
Block road, Closed
Emergency phone not
work
Symbols for the display of traffic problems
yy
Support - Hotline
Web Site : http://www.navigation.com/hyundai
International Toll Free Number: 00800 18 23 53 22
Telephone number for
all other countries
(or if Toll Free numbers
are not supported) : +31 555 384 245