LG Electronics USA LAFP10-R Smart/RF Card Authentication System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1208618
Application ID	LUByuX8zZBbQ/gIUtL5YBg==
Document Description	Manual 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	140.46kB (1755782 bits)
Date Submitted	2009-12-03 00:00:00
Date Available	2010-05-24 00:00:00
Creation Date	2009-11-30 10:05:11
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-11-30 10:05:20
Document Title	횉짜횁철.PDF

4. How to use
4.1.2. [1:1] fingerprint authentication
l’ When auto sensing is running, input ‘0001’ if the user lD is ‘0001’ and then place your finger close to the fingerprint
sensor. The light on the fingerprint input Window turns on to detect the lingerprint and the authentication result is
displayed on the LCD window.
l’ It the user ID is ‘0001’, input ‘0001’ and press the function key. Voice inlormation like “please enter your fingerprint”
lollows. When a fingerprint is inputted, the authentication result is displayed on the LCD window. is entered,
the authentication result will be displayed on the LCD window.
Ii the user ID is ‘0001'. input ‘I' or ‘0001' and press the iunction Key
Place yourtinger close to trie input window wnen you neartne voice message “Please enter your lingerprlnt“
Do not remove your finger untii you hear a “pplg” buzzer sound
ii authentication is suocessiuiiy done, a success message is displayed on the LCD together with a voice
message “You are authorized". The door d LED turn on and door reiay runs.The delault screen appears aiter
i-z seconds The door LED turns on and door relay is back again aiter the door open setting time has elapsed
L The following error message appears together with a veice message “Please try again”.
.. on on y .. on on y .. on 00
~ in case ot autnentication ~ Nonrregistered user lD - During tne authentication
fallule
request to tne authentication
sen/en network trouble
occurred or network iine
was disconnected
61
4. How to use
4.1.3. [1 :N] fingerprint authentication
D This authentication is allowed only for users who are registered as 1:N authentication setting.
I] If a user places hisfner finger close to the fingerprint sensor when auto sensing is
running, the light on the fingerprint input window turns on to detect the fingerprint and
the authentication result is displayed on the LCD window.
I] When you press the function key, voice information like “please enter your fingerprint"
follows When a fingerprint is inputted, the authentication result is displayed on the LCD window.
- watt
. m ln a main screen. press the iunction key
__ mm Place your finger close to the input window when you hear the voice
En message “Please enter your fingerprint" Do not remove your finger
until you hear a “ppig” buzzer sound
If authentication is successfully done. a success message is displayed on the LCD
n 1131211 together with a voice message “Volt are authorized" The door LED turns on and
_ door relay runs The default screen appears after 14 seconds The door LED turns
otf and door relay is back again after the door open setting time has elapsed
.ln use or amnenrtc-ttlon
failur-
-il its connection method is SN
—referto(! 4 z Corlnectlorl
[NS/SN/N01nlode settlngs—
and there ls no user to whom
f:N antherltlcatlorl l: allowed
in the terminal
- During amnentloation
request to the
authentlcation sen/Err
network trouble occurred
or network line was
disconnected
62
4. How to use
4.1.4. Password authentication
i’ If the user ID is ‘0001', input ‘0001’ and press the function key. The terminal waits forthe user password to be
inputted after a “ppiriririck” buzzer sound. Input the reievant password and press [ENTER]. The authentication
result appears on the LCD.
It the user ID is ‘DOOV. enter ‘0001' and press the runCtion Key
W The terminal waits ler the user password to be inputted alter a ”pplrlririck" buzler sound. input the relevant
password and press [ENTER]. Far security reason, the password is displayed as on the LCD screen,
"'“' not actuai numbers
li authentication is successiuiiy done. a success message is displayed ml the LCD together with a voice
message “You are authorized”. The deer LED turns on and deer relay runs The delauit screen appears alter
1~2 seconds The door LED turns on and door relay is back again arter the deer cperi setting time has elapsed.
i’ Error message: An error message appears togetherWith the voice message “Piease try again"
.. on no .. 00 00
» in rate at authentication tariure :1.
E For your inlormation. reler to the lollowings on how to use this authentication in more details, It the relevant ID fora
user ls ‘1234’, enter only ‘12’ for this authentication. This matchlng ls performed just among users havmg IDs of
lrom ‘1200’ to ‘1299’ , starting with ‘12’. If the ID lS ‘0012’, enter “0012” or ‘00’ for authentlcation.
It the user ID lS ‘1234', enter ‘t‘r ‘12' or ‘123‘ and then press the lunctlon key
- 0000 When the Ilght on the Iingerprlnt lnpuI window turns on together wllh the volce message
m “Please enter your ringerpnnt", enter yourIlngerprlnt and hold it there until you hear a “pplg” buzzer sound.
It authentlcatlon rs successtully done. a success message ls dtsplayed on the LCD togetherwtth a valve
message “You are authorlzed”. The door LED turns on ano door relay runs
The delault screen appears after l~2 seconds. The door LED turns or and door relay ls back agarrt aherthe
door open semng ttme has elapsed.
4. How to use
4.1.7. Multiple fingerprint authentication
I’ For a door where higher security is required, multiple fingerprints captured from more than
two persons are assigned to a singIe ID for access to the specific door. The door opens
only when aII the registered fingerprints are successfully authenticated. In the menu, set as
below: 3. Option 2. Verify option :0 :1.
I’ For example, if the ID ‘0001’ is registered With three different fingerprints, all three
fingerprints must be authenticated for access al'ter ID input. A single authentication
laiIure in mid course results in overall failure and the whoIe authentication process
shouId be restaned. This iterative process continues until aII three fingerprints are
authenticated.
man
If the user ID is ‘DODV. input ‘0001’ and press the function Key
—.. m m Place your finger close to the input Window when you hear ihe voice message
m “Please enter your fingerprint". Do not remove your linger untii you hear a
"ppig" buzzer sound.
ii authentication is successiuiiy done. a "ppiriricte' ouzzer sounds and the
.. mm light on the iingerprint input Window turns on together with the voice message
m “Please enter your fingerprint". This iterative process continues until aii
inputted ringerprints have been authenticated.
ll authentication is successiuiiy done, a success message is dispiayed on the LCD
.. on no together With a voice message “You are authorized”. The door LED turns on and
@_ door reiay runs. The deiauit screen appears arter 1~2 seconds. The door LED
turns off and door reiay is back again arter the door open setting time has eiapsed
I_I Error message is same as that of [1:1] authentication.
66
4. How to use
4.2. Time & Attendance control
L Default screen w] [3] Option [1] Application [1] T&A (Time Attendance) settings
L If start and leave time for employees are fixed, set ,  and  to reduce user input errors.
4.2.1. Authentication mode
u moo ‘u moo
Normai mode. ~ Start mode. - Leave mode;
authentication with authentication with [F1] authentication with [F2]
[ENTER]
ammo: “ammo
- Outside work mode; ~ Return mode.
authentication with [F3] authentication with [F4]
- Fingerprint authentication
- Press the lunction key which is reiated to speCitic T & A mode If the function key is not used and authentication process is done in auto sensing.
the current mode on the screen is working for authentication
- Password authentication
- After inputting the user ID and changing the authentication mode by pressing the corresponding tunction hey. input the password ror authentication.
- Card authentication atterthe following settings are done: menu (“6.Device" settings “2.Card reader "
 is set to [1] or over. Pressing the function key changes [ust authentication mode. For card
authentication, press the corresponding function key and then place the card close to the terminal.
, Atter authentication is done. working mode returns to the mode , start. ieave or normal , previously set as time trarnes but if no mode is set for
the specific time period. the previous authentication mode is maintained.
- [1:1] fingerprint authentication : Same as “4.1.23. [1 :N] fingerprint authentication : Same as “4.1.33. Password
authentication : Same as ‘4.1.4.’ Card authentication : Same as ‘4.1.5.’. User ID group authentication : Same as ‘4.1.6.’ 67
4. How to use
4.2.2. Expansion of working mode by multi-key function
l’ If more than 5 working modes - start, leave, outside work (out), return (back) and
normal - are required, it can be expanded up to 41 modes.
l’At'ter setting Menu 3.0piion 1.Applicaiion [f] T&A, set more than one key to
‘O’ in  setting. The keys set to ‘X’ are not applied in this multi-key
function.
l’As a mode is defined as a function key plus a number key, press a number key alter
pressing the function key for authentication. In the server program, authentication
mode is displayed as a function key plus a number key like ‘F3+1’.
l’ For example, when [F4] is set to [O] and  is set to ‘07:00~09:30’, if a
fingerprint user tries for authentication in ‘F4+1’mode,
/ r
‘u may ‘u may I
. in main screen, -The mode is changed -Wheri the mode is
press [F4]. to ‘F4+O'. changed to ‘F4+1‘,
enterthe fingerprint
u 08 54
- When authentication ~ The current time is
is successfully done, 08 34, so it returns to
a success message the start mode.
appears.
68
4. How to use
4.3. For using as meal management system
J Default screen [*] [3] Option [1] Application [2] Setting up to meal
jWhen setting up meal management, a user must input at least one mealtime because the terminal is locked
except for mealtime.
J Each user can authenticate only once for each meal and multiple authentications are not allowed, but multiple
authentications by using [ENTER] key are allowed.
"l ll multiple authentications should not be allowed under any circumstances, go to
Default screen [fl [6] Device settings [1] Function key Setting up to Ent:[X] at .
4.3.1. Meal Classification
3 Function key is used as manipulating key for authentication and can only classily meal based on mealtime
without mode classification. The number placed in the upper center ol screen displays the number 01 authentications
for each mealtime.
/' ' r ' f
m uuw
~Total successlul ~Wheri it is not mealtime ~ When user attempts
authentications for
each mealtime
to try duplicate
authentleaiion tn the
same mealtime
- In case of authentication by fingerprint, authentication is available by auto sensing lunction Without pressing Enter
or function key.
- For password authentication lnput user ID and lunction key and press password
- For card authentication
(exzDefault screen [w] [6] DeVice settings [3] Card reader : more than 1)
Punch card lor authentication
69
4. How to use
4.3.2. [1:1] Fingerprint authentication
L Same as 4.1.2. but [ENTER] key is not avaiiable
4.3.3. [1:N] Fingerprint authentication
L Same as 4.1.3. but [ENTER]
4.3.4. Password authentication
L Same as 4.1.4. but [ENTER] key is not avaiiable
4.3.5. Card authentication
L Same as 4.1.5. but [ENTER] key is not avaiiable
4.3.6. User ID group authentication
L Same as 4.1.6. but [ENTER] key is not avaiiable
70
4. How to use
4.3.7. Allowing multiple authentications
J Default screen C) [ENTER] 0 [6] Device settings 0 [1] Function key 0 Musl be sening as Enl:[0] on 
(For initializing, edit is not needed since default selllng value is [0], but it needs to be checked lf it is not working.)
l For multiple lingerprim authenticalions
‘ m 0334 ‘ r in mm ‘ r m 0334 ‘
~ Inpul fingerprint 0 - Dlsplayinga success 0 - The number oi meal
whlle presslng message when tlmes lncreases once
[ENTER] bunon lrom auinemlcairon lS the screen reiurns Is
(he delaull screen \ successlul (he delaull
‘n in 11334 ‘
‘n m 0354 ‘
‘n m [1334 ‘
- The number cl meal
(l mes lncreases once
the screen returns to
(he delaull
~ Inpul card wrirr
pushlng [ENTER]
key on the basic
screen
- Dlsplaylng a success
message when
authenllcalion ls
successlul
l’ For multiple password authenlications
s f,
in [1334 n new
- Inpul a lunclion key 0 ~ lt lS a screen to wall
f .
n m 0354 n m [1334
~ Dlsplaying a success 0 - The number oi meal
[cne ai [Fl]. [F2], [F3]. [cr lnpuning user‘s message when tlmes lncreases cnce
[F4]) wrrh pushing password wilh a authenircaiicn ls the screen ielums lo
[ENTER] key alter beep sound. Push successiul the default
inputting user ID on
the basic screen
[ENTER] Key alter
lnpumng password.
P/N 1 MFL62730801 @

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2009:11:30 10:05:20+09:00
Create Date                     : 2009:11:30 10:05:11+09:00
Metadata Date                   : 2009:11:30 10:05:20+09:00
Format                          : application/pdf
Title                           : 횉짜횁철.PDF
Document ID                     : uuid:0457a434-116d-432a-b089-877436cae42a
Instance ID                     : uuid:70b8d0ec-24e3-4353-80ab-84429537bec6
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Page Count                      : 12

EXIF Metadata provided by EXIF.tools