LG Electronics USA LGL25 Cellular/PCS GSM/EDGE and Cellular WCDMA Phone with WLAN, Bluetooth and RFID User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2463631
Application ID	3WJ/WAS8WfzGuA31fE5jaw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	453.51kB (5668839 bits)
Date Submitted	2014-11-17 00:00:00
Date Available	2015-05-16 00:00:00
Creation Date	2017-10-20 06:13:59
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-20 06:13:59
Document Title	Users Manual

■■ Explanation■of■instructions
This symbol indicates "the potential and imminent danger of death or
serious injury*1 to a person".
This symbol indicates "the possibility of death or serious injury to a
person".
LGL25
Notes on Usage
"Messages (MMS/SMS) Setting Guide", "Basic Manual", "Notes on Usage", etc. are
collectively referred to as "Instruction Manual".
In this manual, LGL25 is usually referred to as the "product" or "main unit".
In this manual, "microSD memory card", "microSDHC memory card" and
"microSDXC memory card" are abbreviated as "microSD memory card" or "microSD".
December 2014, 1st Edition
MFL68687301
For in uiries call
Keitai■Guarantee■Service■Center
For loss, theft or damage (toll free)
Business hours 9:00-20:00 (7 days a week)
Business hours 9:00-21:00 (7 days a week)
From au cell phones:
0077-7-111
0120-925-919
For service canceling procedure in case of loss or theft
(toll free)
Business hours 24-hour (7 days a week)
Don’t
Indicates■that■handling■with■
wet■hands■is■not■allowed.
Indicates■that■use■in■a■place■
where■the■product■is■likely■to■
Not liquids get■wet■or■allowing■the■product■
to■get■wet■is■not■allowed.
Do
Indicates■that■disassembly■
is■not■allowed.
Not
disassembly
Cell phone and PHS operators collect and
recycle unused telephones, batteries and
battery chargers at stores bearing the
logo regardless of brand and manufacturer
to protect the environment and reuse
valuable resources.
Unplug
Indicates■an■action■that■must■
be■done.
Indicates■that■the■power■plug■
must■be■disconnected■from■the■
power■outlet.
Be■sure■to■read■the■following■hazards■before■use.
Be sure to use only the speciied peripheral devices. Use of other devices might
cause overheating, ignition, rupture, malfunction, or leakage of liquid.
From au cell phones:
0077-7-113
Indicates■an■action■that■is■
not■allowed.
113 area code not required
In case above numbers are not available, call numbers below. (toll free)
(except Okinawa)
Do
Do not use, store or leave the product in hot places (e.g. by the ire, near a heater,
under a kotatsu, in direct sunlight, in a car in the hot sun). Doing so might cause
Don’t ignition, rupture, malfunction, ire or injury.
(Okinawa)
Sold■by:
KDDI■CORPORATION,
OKINAWA■CELLULAR■TELEPHONE■COMPANY
Imported■by:■■LG■Electronics■Japan■Inc.
Manufactured■by:■■LG■Electronics■Inc.
Exemptions
• The Company is not liable for any damages arising from earthquakes, lightning, storms,
loods or other natural disasters, as well as ires, actions by third parties, other
accidents, intentional or mistaken misoperation by the customer, or use under other
unusual conditions outside the responsibility of the Company.
• The Company is not liable for any incidental damages (change/disappearance of
described content, loss of business income, disruption of business, etc.) arising from
use or inability to use the product.
• The Company is not liable for any damages arising from failure to observe the
described content of the "Instruction Manual".
• The Company is not liable for any damages arising, for example, from malfunction
caused by combination with connected devices or software not related to the
Company.
• Captured image data or downloaded data may sometimes be altered or lost due to
malfunctions, repair or other handling of the product. The Company is not liable for any
damage or lost income resulting from recovery of these data.
• It is recommended you keep a copy of important data on your PC's hard disk, etc.
Whatever the cause of the defect or malfunction may be, the Company assumes no
responsibility for alteration or loss of saved data.
Do
• Reproduction of the content of this manual in part or in whole is prohibited.
Safety Precautions (Observe Strictly)
■■ Before■using■the■product,■thoroughly■read■these■safety■precautions■for■proper■
use.■After■reading,■store■the■precautions■in■a■safe■place.
● These "Safety Precautions" describe instructions that should be observed to prevent
damage to property or injury to the customer or others using the product.
● These instructions are divided into the following categories.
Do not throw the product into a ire or heat it. Doing so might cause ignition,
rupture or ire.
Don’t
Do not short-circuit the external connection terminal, earphone jack, etc. Do not
allow conductive foreign objects (metal fragments, pencil leads, etc.) to come into
Don’t contact with or get inside the connection terminal, earphone jack, etc. Doing so
might cause ire, malfunction or burns due to overheating.
When using metal accessories, etc., do not let the metal part come in contact
with the connection terminal or power outlet while charging. Doing so might cause
Don’t electric shock, ignition, injury or malfunction.
Do not operate the product while driving a car or motorbike, riding a bicycle, or
walking. Doing so might compromise traic safety and cause an accident.
Don’t
If charging is not completed after the speciied charging time, stop charging.
Failure to do so might cause leakage of liquid, overheating, rupture or ignition.
Do not leave the product in places where small children can reach. Small children
might swallow small parts, etc. by mistake and choke on them, or might drop them
Don’t by mistake and cause accidents or injury.
Be■sure■to■read■the■following■cautions■before■use.
Do not store the product in places subject to direct sunlight (e.g. in cars), places
that get hot or get extremely cold, or in humid or dusty places. Doing so might
Don’t cause overheating, ignition, deformation or malfunction.
Do not place the product on unstable places such as rocky stands or tilting
surfaces. Dropping the product might cause injury or damage. Pay suicient
Don’t attention while vibrator is on. Also, pay suicient attention to impact, etc.
Do not cover or wrap this product with bedding, etc. while using or charging the
product. Doing so might cause ire, malfunction or injury.
Don’t
Do not touch the main unit or the speciied charging equipment (sold separately)
for a long time while power is being supplied from an external source. Doing so
Don’t might cause low-temperature burns.
Be careful when using this product in a high temperature place for a long time.
It might become hot. Using it with your skin touching the product for a long time
Don’t might cause low-temperature burns.
Do not use power outlets or wiring apparatus beyond its rating. Also, exceeding
rating, for example, by connecting multiple devices to a single power strip might
Don’t cause ire due to overheating.
The customer is not allowed to disassemble, modify or repair the product.
Doing so might cause malfunction, ignition, electric shock, or injury. The Company
Not
is not liable even in the event of any non-conformities arising on the product or
disassembly
peripheral devices as a result of modiication, etc. Modiication of cell phones is in
violation of the Wireless Telegraphy Act.
Be■sure■to■read■the■following■warnings■before■use.
Do not drop or subject to strong impact, such as throwing. Doing so might cause
rupture, overheating, ignition, leakage of liquid or malfunction.
Don’t
Do not let your hands, ingers and other parts of the body touch the external
connection terminal or earphone jack. Doing so might cause electric shock, injury
Don’t or malfunction.
If the product is damaged because it is dropped, and its display is cracked or
internal parts are exposed, do not touch the cracked display or exposed parts with
Don’t your hands. Doing so might cause electric shock or injury from damaged parts.
Contact au shop or Keitai Guarantee Service Center.
If this product or charging equipment (sold separately) are wet, charging may
cause electric shock, short-circuiting or corrosion of electronic circuits, resulting
Not liquids in ire from overheating, malfunction or burns.
When using the product near an implanted pacemaker, implanted cardioverterdeibrillator or other electronic medical device, radio waves might afect these
units and devices. So, please observe the following.
1. Those with an implanted pacemaker or implanted cardioverter-deibrillator
should carry or use the product at least 15 cm away from the pacemaker or
cardioverter-deibrillator applied part.
2. Set the product to airplane mode or turn of the power in advance in places
where you cannot move freely or where you cannot secure a distance of more
than 15 cm with one another, since there may be people with a implanted
cardiac pacemaker or implanted cardioverter-deibrillator nearby.
3. Pay attention to the following points when using the product inside medical
institutions.
• Do not bring the product into operating theaters, intensive-care units (ICU)
and coronary care units (CCU).
• Turn the product of in hospital wards.
• Even if you are in a lobby, etc., be sure to turn the product of when there
are electronic medical devices nearby.
• When a medical institution has laid down designated areas where use of
the product is prohibited or is not allowed to be brought in, abide by the
instructions of that medical institution.
4. When using electronic medical devices other than an implanted pacemaker
and implanted cardioverter-deibrillator outside a medical institution (e.g. home
medical treatment), check individually with the manufacturer of the electronic
medical device regarding the inluence of radio waves.
Stay alert to your surroundings when calling, messaging, browsing the Internet,
taking photos, playing games or listening to music. Failure to do so might cause
falling down or traic accident.
When using the product with the lash on, do not preform in front of a person's
eyes. Do not gaze at the light emitting part during lash. Doing so might cause
Don’t impairment of eyesight, etc. Be especially careful not to take pictures of small
children from a very close distance.
Do not lighten lash toward a person who drives an automobile, a motorbike or a
bicycle. If dazzled by the light, the driver might become unable to drive and cause
Don’t an accident.
Do
Sometimes, very rarely some people demonstrate symptoms such as temporary
muscle spasms, loss of consciousness, etc. by watching repeatedly lickering
screens. Those with a past history of this should consult with a physician
beforehand.
Do not use the product with the back cover removed.
Do not place the product near corrosive chemicals or in places where corrosive
gas is generated. Doing so might cause malfunction or loss of internal data.
Don’t
Do not place or store the product with the back cover removed from the main
unit. Doing so might allow dust or other foreign objects to get inside and cause
Don’t malfunction.
Do
Do
Stop using the product if there is smoke, abnormal odor or noise, excessive
overheating, or other abnormalities. If an abnormality occurs, disconnect the
speciied charging equipment (sold separately) from the power outlet or cigarette
lighter socket, make sure that the product is not overheating before turning the
power of, and remove the battery and contact an au shop or Keitai Guarantee
Service Center. Also, if you have dropped or damaged the product, do not continue
to use it in that state, and contact an au shop or Keitai Guarantee Service Center.
When inserting an earphone, etc. into the product, adjust the volume to the proper
level. Setting too loud a volume or using the earphone continuously for a long
period of time might adversely afect your ears.
Also, raising the volume too high might prevent you from hearing sounds around
you, which might in turn lead to a traic accident at a railroad crossing or
pedestrian crossing.
Use of the product in an automobile sometimes afects on-vehicle electronic
devices, though this rarely happens. If this happens, stop using since this might
Don’t compromise safe travel.
Do
If you feel any abnormality with your skin, immediately consult a dermatologist.
Itching, rashes, eczema, etc. sometimes occurs depending on your physical
constitution and condition.
The materials of parts used on the product are as follows.
Part
Display
Material
Glass
Surface■treatment
External case (Display side frame) PC
Coating
Back cover
PC
Coating
Volume key
PC
Coating
Power key
PC
Coating
Home key
Acryl
Earpiece
Stainless steel
Coating
Camera lens
Glass
Coating
Camera lens decoration
AL
Anodic oxide
Flash
PC
External connection terminal
Stainless steel
NI Plating
Do
When using a charging equipment or an external device, insert/remove the
connector straight to/from the terminal. Failure to insert correctly might cause
damage or malfunction.
Do not bring the product close to magnetized objects such as cash cards, loppy
disks, credit cards, and prepaid cards. Doing so might cause loss of recorded
Don’t information.
Do
If a child uses this product, ensure that a guardian instructs the child on proper
use of this equipment to prevent any danger. Also, ensure that the child is using
the product as per instructions. Failure to do so might cause injury.
Do not let liquids, metal objects, burnable items, or other foreign matter to get inside
of au Micro IC Card (LTE) slot or microSD memory card slot. Doing so might cause ire,
Don’t electric shock, malfunction or injury.
Do not swing the product around by holding earphones, etc. Doing so might cause
an accident or damage.
■■ Main■unit
Do not use a cell phone while driving a car or riding a motorbike or bicycle. It might
cause a traic accident. Use of a cell phone while driving a car or motorbike is
Don’t prohibited by law. Use of a cell phone while riding a bicycle may be punishable by
some regulations.
Do
When using the terminal in a medical facility, follow the instructions of the facility.
Turn the terminal of in areas where use is prohibited.
Failure to do so might cause electronic equipment or electronic medical
equipment a malfunction. When the product is set to power on automatically,
disable the setting.
■■ Battery■pack
Li-ion00
Do
Do not place the product directly on the sand beach, etc. Sand or other small
particles might get inside the speaker, external connection terminal, or earphone
Don’t jack and cause the volume to drop. If sand gets inside this product's main unit, it
might cause overheating or malfunction.
Install and position in-car devices where they do not hinder driving or safety
equipment such as airbags. Failure to do so might cause a traic accident. Follow
the manuals for in-car devices to install them.
When the speciied charging equipment (sold separately) is not to be used for a
long time, disconnect the power plug of the speciied charging equipment (sold
Unplug separately) from the power outlet or cigarette lighter socket. Failure to do so
might cause a ire or malfunction.
Do not use in places subject to direct splashing with water or pet urine, etc. or
in humid places such as bath areas. Doing so might cause malfunctions or injury
Not liquids resulting from overheating, ire, electric shock, or short-circuiting of electronic
circuits. In the event that the product is splashed with liquid, immediately
disconnect the power plug.
Do not short-circuit the positive (+) and negative (-) terminals of the battery pack.
Be■sure■to■read■the■following■warnings■before■use.
Connect the battery pack to the product in the correct orientation. Connecting
in an incorrect orientation might cause rupture, ire or overheating. Do not try
Don’t to forcibly connect the battery pack, instead thoroughly check the connection
terminals carefully before connection.
Do not puncture the battery pack with a nail, hit it with a hammer or step on it.
Doing so might cause ignition or damage.
Don’t
Do not let metal objects (such as necklaces and hairpins) to come in contact with the
connection terminals when carrying or storing the battery pack. Doing so might cause
Don’t overheating, ignition, ire, leakage of liquid, or malfunction due to a short circuit.
Not
disassembly
Do not disassemble, modify or directly solder the battery pack. Doing so might cause
spilling of the liquid inside the battery pack resulting in an accident such as loss of
eyesight if it gets into the eyes, or cause overheating, ignition, rupture or injury.
Do not use a battery pack that has been dropped, stepped on, damaged, or
leaking battery liquid. Doing so might cause overheating, ignition, leakage of
Don’t liquids, rupture, malfunction or injury. Immediately move the battery pack away
from ire if you notice leakage of liquid or unusual odor. Failure to do so might
cause the leaked liquid to catch ire resulting in ignition or rupture.
Do not wet the battery pack with water, seawater, pet urine, etc. A wet battery
pack might cause overheating, rupture, ignition, malfunction or injury.
Not liquids If you drop the product into the water by mistake, immediately turn of the power,
remove the battery pack, and contact an au shop or Keitai Guarantee Service
Center. Never charge the wet battery pack.
Do
Do
If the leaked liquid gets on your skin or clothes, immediately rinse it of with water
to avoid injury. If the liquid gets into your eyes, do not rub, but after wash your
eyes with water, and immediately consult a doctor to avoid the risk of losing your
eyesight. If the liquid gets on a device, wipe it of without touching the liquid.
The battery pack is a consumable item. If the performance of a battery pack does
not recover (e.g. the usable time after each charge has become extremely short),
the battery pack is at the end of service life, so stop using and buy a new one
of the speciied type. Failure to do so might cause overheating, ignition, rupture
or leakage of liquid. Note that the length of service life varies depending on the
usage condition, etc.
Do not use in humid places such as bath areas, or connect/disconnect the
speciied charging equipment (sold separately) with wet hands. Doing so might
Not liquids cause electric shock, malfunction or injury.
No
wet hands
Do
Do
Do
Do
Don’t • AC adapter (sold separately): 100 VAC to 240 VAC
• DC adapter (sold separately): 12/24 VDC (for negative grounded vehicles only)
* Use the speciied charging equipment (sold separately).
Do
Do
Firmly insert the plug of the speciied charging equipment (sold separately) into the
power outlet or cigarette lighter socket down to the base of its pins. Incomplete
insertion of the power plug might cause electric shock, overheating, ignition, ire or
injury. Do not use the speciied charging equipment when it is broken, or when the
insertion connector of power outlet or cigarette lighter socket gets loose.
If the fuse in the common DC adapter 03 (sold separately) blows, replace it with
a fuse of the speciied type (250 V, 1A). Replacing with a diferent type of fuse
might cause overheating or ignition. (For information about fuse replacement,
carefully read the manual for the common DC adapter 03 (sold separately).)
Do not damage, modify, twist, pull, or place a heavy object on the power cord of
the speciied charging equipment (sold separately). Do not use a damaged cord.
Don’t Doing so might cause electric shock, short circuit, ire or injury.
Do not let your hands, ingers or other parts of your body touch the connection
terminals. Doing so might cause electric shock, injury or malfunction.
Be■sure■to■read■the■following■warnings■before■use.
Do not put the au Micro IC Card (LTE) in a cooking apparatus such as a microwave
oven or a pressure vessel. Doing so might cause melting, overheating, fuming,
Don’t loss of data or malfunction.
Be■sure■to■read■the■following■cautions■before■use.
Be careful when attaching/removing the au Micro IC Card (LTE). Doing so might
injure your hands or ingers.
Do
Not
disassembly
Do not use or leave the au Micro IC Card (LTE) in hot places such as by the ire
or a heater. Doing so might cause melting, overheating, fuming, loss of data or
Don’t malfunction.
Do
■■ Precautions■common■to■the■main■unit,■battery■pack,■charging■equipment,■au■
Micro■IC■Card■(LTE)■and■peripheral■devices
● Do not apply excessive force to the product during use. Be sure not to put the product
into a tightly packed bag or place a heavy object on the product in a bag. Putting the
product in your pocket and sitting on it might damage the display or internal circuit
board resulting in a malfunction.
It might cause connector damage or a malfunction when connecting an external
device to the external connection terminal of the product or the earphone jack of the
product. Such damage and malfunction are not covered by the warranty, even if there
is no external damage.
● Do not use the product in extremely hot, cold or humid places. (Use within an ambient
temperature range of 5℃ to 35℃ and humidity range of 35% to 85%.)
● Do not use in places subject to lots of dust or vibration.
● Clean the connection terminals and earphone jack with dry cotton swabs, etc. every
now and then. Soiled terminals might cause poor connection. Do not exert a strong
force which can result in deformation.
● Clean the product with a dry soft cloth (such as the type used for eyeglasses).
Forceful rubbing with a dry cloth may scratch the display. The display may be stained
if splash or smear is left attached to the surface. Wiping the product using alcohol,
thinner, benzene, detergent, etc. might erase the printing on the outer casing or cause
discoloration.
● Use as far away as possible from land-line phones, TVs, and radios. Use nearby might
afect them.
● The product may become warm while charging etc., depending on the situations, but
this is not abnormal.
● When the product is used by a child, parents or guardians should thoroughly read
"Instruction Manual" and teach the child how to use it.
● Turn of the power before removing the battery pack. If you remove the battery pack
with the power on, saved data might be altered or lost.
■■ Main■unit
● Do not forcefully press, tap, or intentionally subject the display to strong impact. Doing
so might cause scratching or damage.
● Do not forcefully press your ingernails, sharp objects, or hard objects against keys or
display surface. Doing so might cause scratching or damage.
The touch panel is designed to be lightly touched by ingers. Do not apply strong
pressure with your ingers or sharp-pointed objects (such as ingernails, ballpoint pens,
and pins) on the touch panel.
In the following cases, the touch panel may not work even if you touch it. Note that it
may cause false operations.
•
•
•
•
•
Operation
Operation
Operation
Operation
Operation
with
with
with
with
with
ingernails
a foreign object placed on the touch panel
a protective sheet or sticker on the touch panel
water drops left or frozen on the surface
wet or sweaty ingers
" printed
● Do not remove the stickers that display the "Technical Conformity Mark
with IMEI (International Mobile Equipment Identity) which can be seen when the battery
pack is removed. These stickers prove that the product and the communication module
you are using comply with the Wireless Telegraphy Act and Telecommunications
Operations Act.
● Never use modiied au cell phones. Use of a modiied device violates the Radio Law.
The product has acquired the certiication of conformity with technical regulations
for the speciied radio station based on the Radio Law, and the "Technical Conformity
" is printed on the nameplate of the product's main unit as a certiicate.
Mark
If the product's main unit is modiied by removing the screw to disassemble, technical
standard compliance becomes invalid. Never use the product without the valid
certiication. Doing so violates the Radio Law.
Do not touch the IC (metal) part of the au Micro IC Card (LTE) or short-circuit it.
Doing so might cause loss of data or malfunction.
● Contents saved in the product, such as contacts, mails and bookmarks, might be
altered or lost in an accident, malfunction, repair or mishandling. Be sure to keep a
copy of important contents. Note that the Company assumes no responsibility for any
damages or lost proits resulting from altered or lost contents.
Do not drop the au Micro IC Card (LTE) or subject it to strong impact. Doing so
may cause malfunction.
● Note that contents (both charged or free content) saved in the product cannot be
returned to the customer when it is replaced for repair of malfunction, for example.
Do not fold, bend or place a heavy object on the au Micro IC Card (LTE). Doing so
may cause malfunction.
● The product uses liquid crystal for its display. The display response speed may
become slow when the ambient temperature is low, which is due to the property of
liquid crystal and not a malfunction. The display response speed will return to normal
at room temperature.
Do not wet the au Micro IC Card (LTE). Doing so may cause malfunction.
● Although the display used on the product is made using high-precision technology,
some pixels (dots) might be lit or out at all times. Note that this is not a malfunction.
Don’t
Don’t
Not liquids
Do not scratch the IC (metal) part of the au Micro IC Card (LTE). Doing so may
cause malfunction.
Don’t
Do not store the au Micro IC Card (LTE) in dusty places. Doing so may cause
malfunction.
Don’t
Do not store the au Micro IC Card (LTE) in places exposed to direct sunlight or hot
and humid places. Doing so may cause malfunction.
Don’t
Store the au Micro IC Card (LTE) out of reach of small children. Accidental swallow
might cause sufocation, injury, etc.
Do
These■precautions■are■provided■to■ensure■that■performance■can■be■fully■
demonstrated.■Thoroughly■read■these■precautions■to■ensure■correct■use.
● To prevent unlawful modiication, the product has been designed so that it cannot be
easily disassembled. Modifying the product is prohibited by the Radio Law.
Don’t
Wipe of the dust on the power plug. Failure to do so might cause ire, burns or
electric shock.
Handling Precautions
Do not throw the au Micro IC Card (LTE) into a ire or heat it. Doing so might cause
melting, overheating, fuming, loss of data or malfunction.
Don’t
Don’t
Before cleaning the speciied charging equipment (sold separately), unplug its
power plug from the outlet or cigarette lighter socket. If the plug remains plugged
Unplug in when you clean the equipment, it might cause ire, malfunction, or injury from
electric shock or short circuit.
Use only the devices speciied by the Company to insert the au Micro IC Card (LTE) in.
Using a device not speciied by the Company might cause loss of data or malfunction.
For the speciied devices, contact an au shop or Customer Service Center.
Do not disassemble or modify the au Micro IC Card (LTE). Doing so might cause
loss of data or malfunction.
Don’t
If you hear thunder, do not touch the speciied charging equipment (sold
separately). Doing so might cause electric shock as a result of a lightning strike.
Do not leave the speciied charging equipment (sold separately) connected to the
main unit with the battery pack removed. Doing so might cause ignition, electric
shock or injury.
■■ au■Micro■IC■Card■(LTE)
Do
Do not use at other voltages than the speciied power supply voltage. Doing so
might cause ignition, ire, overheating, electric shock or injury.
When unplugging the plug of the speciied charging equipment (sold separately)
from the power outlet, hold and pull the power plug. Pulling on the cable might
cause damage.
Do not use the common DC adapter 03 (sold separately) with the car engine
stopped. Doing so might cause draining of the car battery.
■■ Charging■equipment
Be■sure■to■read■the■following■warnings■before■use.
Charge the battery in a stable place. If placed on an inclined surface or wobbly
stand, the product might fall and cause injury or damage. Pay careful attention
while vibrator is set. In addition, do not cover or wrap the product with a cloth or
bedding. Doing so might cause ire, malfunction or injury.
Don’t
Be careful not to have the battery pack bitten by your pet. It might cause leakage
of liquid, overheating, rupture, ignition, ire or injury.
Do
Pay attention to items stuck to the main unit. The speaker uses magnets,
so thumbtacks and pins, craft knife blades, staples, and other metal objects
sometimes become stuck to the main unit, and cause unexpected injury. Before
using the product, be sure to check that there are no foreign objects on the
speaker or other parts.
Do
Don’t
Don’t
Be careful when setting vibrator (vibration) or ringtone volume if your heart is
weak. Doing so might cause bad efect to heart.
(The battery pack of the product is a lithium-ion battery.)
When you purchase your cell phone, it is not fully charged.
Charge the battery before using the product.
Be■sure■to■read■the■following■hazards■before■use.
Coating
When adjusting the volume with an earphone, etc. inserted into the product, raise
the volume a little at a time. If you raise the volume too much from the outset,
sudden loud noise from the earphone, etc. might adversely afect your ears.
Be■sure■to■read■the■following■warnings■before■use.
When using the product for calling or data communication, be careful not to keep
the product in direct contact with your skin for a prolonged period, or not to cover
Don’t the product with paper, cloth, bedding, etc. The main unit might get hot and cause
ire, injure, burns or malfunction.
Be■sure■to■read■the■following■cautions■before■use.
Do
Don’t
Do not use outside when you hear thunder. Doing so might cause lightning strikes
or electric shock.
Do
When boarding an airplane, turn this product of or turn airplane mode on. As there
are usage restrictions in an airplane, follow the instructions from the airline. When
the product is set to power on automatically, disable the setting.
Failure to do so might cause airplane electronic equipment a malfunction. If you
commit any prohibited acts, such as using the phone in an airplane, you will be
punished in accordance with the law.
Don’t
Do not expose the camera lens directly to sunlight for an extended period. Doing
so might cause ignition, rupture or ire by the light-collecting mechanism of the
Don’t lens.
No
wet hands
Do
Don’t
Don’t
• The content of this manual is subject to change without notice.
• Every efort has been made in the preparation of this manual. Should you notice any
unclear points, omissions, etc., feel free to contact us.
Before entering an area where lammable gas is generated such as a gas station,
be sure to turn of this product. Do not charge the battery. Failure to do so might
cause the gas to catch ire.
Do not put the product in a cooking apparatus such as a microwave oven or a
pressure vessel. Doing so might cause ignition, rupture, malfunction, ire or injury.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan, Inc.
Manufactured by: LG Electronics Inc.
memo
When removing the back cover, do not exert extra force. The battery pack might
jump out and cause injury or malfunction.
Do
Don’t
■■ Precautions■common■to■the■main■unit,■battery■pack,■charging■equipment,■au■
Micro■IC■Card■(LTE),■peripheral■devices
PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR
AFTER CALLING 157 ON YOUR au CELL PHONE
0120-977-033
0120-977-699
■■ Explanation■of■graphic■symbols
From fixed-line phones/au cell phones,
157 area code not required
From fixed-line phones:
*1 Serious injury : This refers to loss of sight, injury, burns (high- and low-temperature),
electric shock, broken bones, injuries with residual afterefects from poisoning,
etc., and injuries requiring hospital admission for treatment or long term hospital
attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock,
etc. that do not require hospital admission for treatment or long-term hospital
attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock, or pets.
No
wet hands
Customer■Service■Center
For general, charge, operations (toll free)
From fixed-line phones:
This symbol indicates "the possibility of personal minor injury*2 to a person
or physical damage*3".
Do not splash with water or other liquids. Also, never use in places subject to
direct splashing with water or pet urine, etc. or in humid places such as bath
Not liquids areas, or use with wet hands. Doing so might cause electric shock, malfunction
from short-circuiting, or corrosion of electronic circuits. In the event that the
product is splashed with liquid, immediately disconnect the power plug of the
charging equipment (sold separately). Malfunctions caused by wetting with water
No
wet hands or humidity are not covered by the warranty and charges will be incurred for repair.
● Take care not to inconvenience people around you when you use the product in a
public place.
● You are recommended to store copies of individual data such as photos you took, still
images/videos and music on your PC by sending each ile as mail attachment, etc.
Note, however, that you may not be able to make copies of any copyrighted data even
by the above mentioned means.
● Take care not to place magnetized items such as magnetic cards, speakers or TV
sets near the product, as it might cause malfunction.
Putting a strong magnetism close to the product might cause false operations.
● When you put the product in your pocket or bag, take care so that the display does
not come in contact with metal objects or other hard objects. Doing so might cause
scratching or damage.
● When suddenly brought into a warm place from a cold place, or when used in a humid
location, or where temperature suddenly changes such as near the air discharge port
of an air conditioner, water droplets (i.e. condensation) sometimes form inside the
product. Note that when used under conditions such as this, the humidity might cause
corrosion or malfunction.
● When wiping the display, wipe with a dry soft cloth. Use of a moistened cloth, glass
cleaner or other similar liquid might cause malfunction.
● When connecting an external device to an external connection terminal or an earphone
jack, make sure that the connector of external device is straight with the external
connection terminal or the earphone jack.
● Note that applying excessive force with an external device connected to the external
connection terminal or the earphone jack might cause damage.
● Do not discard this product together with regular trash. Please cooperate in the
collection of au phone when it is no longer needed to protect the environment and
efectively use resources. Old au phones are collected at au shops and other places.
● Do not insert a card other than microSD memory card into the microSD memory card
slot on this product.
● Do not exert excessive force when attaching/removing a microSD memory card. Doing
so might injure your hands or ingers.
● While writing/reading data to/from a microSD memory card, do not subject the product
to vibration or impact, remove the battery pack or turn of the power. Doing so might
cause loss of data or malfunction.
● When hearing the other party's voice, make sure that the earpiece is placed at the
center of your ear. If the earpiece (audio output port) is closed by the ear lobe, it may
be hard to hear the voice.
● Even if you cover the microphone to make your voice inaudible to the other party, the
other party can hear your voice.
● Sound from speaker may be very loud when you use hands-free calling. Keep it away
from your ears when using it.
● Do not cover microphone with your ingers, etc. It may make your voice inaudible to the
other party and sound diicult to be recorded or detected.
● When you put a sticker, etc. on the proximity sensor, the sensor will malfunction and
indications on the display will turn of at all times while receiving or making a call. In
this case, note that you may not be able to operate the product.
■■ Touch■Panel
● Use your inger to operate the touch panel. Do not use ballpoint pens, pencils, or other
sharp-pointed objects. Using such objects does not only hinder correct operations on
the touch panel, but also might cause scratching or damage to the display.
● Do not put stickers or sheets (e.g. commercially available protective ilms, peep
prevention sheets) on the display. Doing so might cause improper reaction of touch
panel.
● Do not operate the touch panel with ingernails. Doing so might cause split nails or
jammed ingers.
● If the display surface is dirty or wet with sweat or water, it might cause false
operations. In such case, wipe the display surface with a dry soft cloth.
● When carrying the product in your pocket or bag, take care not to put the touch panel
close to metals or other conductive materials, as it might cause false operations on
the touch panel.
■■ Battery■pack
● Use in very hot or cold environments, for example, when left in a car with the windows
closed in summer, will cause the battery pack capacity to drop and shorten the
available battery usage time. This will also shorten the battery pack service life. Try to
use the built-in battery as far as possible at room temperature.
● When the battery pack is not to be used for a long time, remove the battery pack from
the main unit, and store it away from hot and humid places.
● Charge the battery before using the product for the irst time after purchase, or when
you have not used the product for a long time.
● The battery pack is a consumable item. If the performance of a battery pack does not
recover after charge, the battery pack is at the end of service life, so buy a new one of
the speciied type. Note that the length of service life varies depending on the usage
conditions, etc.
● Do not discard battery packs together with regular trash. Please cooperate in the
collection of used battery packs to protect the environment and efectively use
resources. au shops and other retailers collect used battery packs.
● The battery pack sometimes swell up as they approach the end of their service life.
This is due to the properties of lithium-ion batteries, and is not a problem in terms of
safety.
■■ Charging■equipment
● When not using the speciied charging equipment (sold separately), remove the plug
from the power outlet or cigarette lighter socket.
● Do not loop the power cord of the speciied charging equipment (sold separately)
around the charging equipment. Doing so might cause electric shock, overheating, ire,
malfunction or injury.
● Do not forcibly bend the plug of the speciied charging equipment (sold separately)
or the connection part between the connector and power cord. Doing so might cause
electric shock, overheating, ire, malfunction or injury.
■■ au■Micro■IC■Card■(LTE)
● The au Micro IC Card (LTE) is lent to you by au. In case of loss or damage, the card will
be replaced at your expense. When a malfunction is suspected, or in case of theft or
loss, contact an au shop or PiPit.
● Do not forcibly remove or insert the au Micro IC Card (LTE). Be careful not to exert
excessive force when inserting the card into your au cell phone.
● You are responsible for any damage caused by inserting your au Micro IC Card (LTE)
into some other IC card reader/writer, etc.
● Keep the IC (metal) part of your au Micro IC Card (LTE) clean. Wipe the card with a dry
soft cloth (such as for cleaning eyeglasses) for cleaning.
■■ PUK■code
● Do not put stickers, etc. on the au Micro IC Card (LTE).
• PUK code is an eight-digit number given at the time of purchase, which is printed on
the back side of the plastic card on which your au Micro IC Card (LTE) is attached.
● Do not insert the IC card to which a conversion adapter is attached. Doing so might
cause malfunction.
In case the PIN code is locked, you can unlock it by entering the PUK code.
• After entering the PUK code, you need to set a new PIN code.
■■ Camera
• If the PUK code is incorrectly entered 10 times in a row, contact an au shop, PiPit or
Customer Service Center.
● When using the camera, follow the common etiquette regarding camera use.
• "PIN code" is not reset by initializing the product.
● Image data might be altered or lost due to malfunction, repair or mishandling of the
product. The Company takes no responsibility for the recovery of altered or lost data,
the damages resulting from altered or lost data, and lost proits.
● When photographing important occasions (such as a wedding), take a trial shot and
check the shot image to make sure it is correctly shot.
● Do not use the camera for recording commercially available books or information of
which photographing is not allowed.
● Do not leave the camera lens exposed to direct sunlight. Imaging elements might be
discolored or burnt.
■■ Music/video■function
● Do not listen to music or watch videos while driving a car or motorbike, or riding a
bicycle. Use of cell phones while driving a car or motorbike is prohibited by law. (Use
of cell phones while riding a bicycle may also be punishable by law.) In addition, stay
alert to the traic around you even when walking. Surrounding sounds may not be heard
clearly, and gazing at the screen might distract your attention causing a traic accident.
Be especially careful at railroad crossings, on a platform, and at pedestrian crossings.
Bluetooth®/Wireless LAN (Wi-Fi®) Function
• Bluetooth® function and wireless LAN (Wi-Fi®) function of this product conform to
the domestic standards of Japan, FCC standards, and EC directives, and have been
certiied.
• Use the wireless LAN (Wi-Fi®) function in the 5 GHz band in Japan. The 5 GHz band
wireless LAN (Wi-Fi®) function of this product conforms to domestic wireless standards
in Japan, and has been certiied. Use overseas may be subject to punishment by law.
• Subjecting this product to magnetic or electrical noise might increase noise and
prevent it from performing communications. (This product is particularly susceptible to
noise when it used near a microwave oven.)
■■ Copyrights■and■rights■of■portrait
• As there are usage restrictions in an airplane, follow the instructions of the airline.
* How to make backups: Store important data such as contacts data, music, shot
photos and videos on microSD memory cards. You can also send iles as mail
attachment or transfer to your PC. Note, however, that some data cannot be copied
by using these means. Please be forewarned.
Available■Security■Codes
● Security code
Example■of■ a To■do■remote■operation■of■voice■mail■and■call■forwarding■
services■from■a■landline■phone
usage
b To■use■Customer■Service■Center■and■to■do■inquiries,■
applications,■and■modiications■on■the■au■homepage
Initial■value A four digit number chosen by the customer and noted on the application
form
● PIN code
Example■of■
To prevent unauthorized use of the au Micro IC Card (LTE) by third parties
usage
Initial■value 1234
Privacy■Protected■Function
The function shown below is installed in the product to protect the privacy of the saved data.
Function
Screen lock
• The communication speed and connectable range vary depending on the distance
between communication devices, obstacles and the devices to connect.
2.4■GHz■Frequency■Band■Precautions
The frequencies used by the Bluetooth® and/or wireless LAN (Wi-Fi®) function of this
product are in the 2.4 GHz band. In this frequency band, other similar wireless stations,
in-plant wireless stations for mobile unit identiication that require a license to use, such
as factory production lines, speciic small power wireless stations that do not require
licenses, amateur wireless stations (collectively called "other wireless stations" from
here on) are operated in addition to home electrical appliances such as microwave ovens,
devices for industrial, scientiic and medical devices.
1. Before using the product, make sure that "other wireless stations" are not in
operation nearby.
2. In the event that instances of radio wave interference have occurred between this
product and "other wireless stations", immediately either relocate this product or
stop operation of the device (stop the emission of radio waves).
3. If you are unclear on any points or are troubled by anything, contact an au shop
or Customer Service Center.
memo
The product has various security codes that you can use.
The available security codes are as follows. Do not forget the security codes you set as
they are necessary for operations and contracts.
• The connections between this product and all other Bluetooth® and wireless LAN (WiFi®) devices have not been conirmed. Therefore, connections with all Bluetooth® and
wireless LAN (Wi-Fi®) devices have not been guaranteed.
• This product supports security features for wireless communications that are compliant
with the Bluetooth® and wireless LAN (Wi-Fi®) standard speciications, but the security
may not be suicient depending on the usage environment and coniguration. Be careful
when making data communication using Bluetooth® or wireless LAN (Wi-Fi®) function.
• Wireless LAN (Wi-Fi®) has the advantage that it can be freely connected anywhere
within the radio wave range, as it uses radio waves for exchanging information. At the
same time, there is a risk that a malicious third party may obtain unauthorized access
if security settings have not been conigured. You are recommended to conigure
security settings before using wireless LAN at your decision and responsibility.
• The Company assumes no responsibility for leakage of data and information that may
occur during Bluetooth®/wireless LAN (Wi-Fi®) communication.
• Since Bluetooth and wireless LAN (Wi-Fi ) functions use the same frequency band,
using the both functions at the same may cause radio wave interference resulting in
decreased communication speed or disconnection from the network. If connection fails,
stop using either of Bluetooth® or wireless LAN (Wi-Fi®) functions.
®
®
Bluetooth® and wireless LAN (Wi-Fi®) functions of this product use frequencies in the 2.4
GHz band.
2.4FH1/DS4/OF4
Description
Set Password to secure data when turning on the phone or when
unlocking the screen.
PIN■Code
■■ PIN■code
To prevent unauthorized use of the au Micro IC Card (LTE) by a third party, you can set
the product to require PIN code entry every time the power is turned on. You also need to
enter PIN code when setting whether the PIN code entry is required.
If the PIN code is incorrectly entered three times in a row, the PIN code will be locked. You
can unlock the PIN code using PUK code.
• PIN code is "1234" and PIN code entry was set to not be required at the time of
purchase. You can change PIN code to any four- to eight-digit number, and set the PIN
code entry to be required as necessary.
a/n
W52 (5.2 GHz band/36, 40, 44, 48 ch)
W53 (5.3 GHz band/52, 56, 60, 64 ch)
W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch)
■■ HT40
W52 (5.2 GHz band/38, 46 ch)
W53 (5.3 GHz band/54, 62 ch)
W56 (5.6 GHz band/102, 110, 118, 126, 134 ch)
Notes on Packet Communication Charge
• On the product to browse websites, download applications, communicate using
applications, send/receive e-mails, and conigure various settings, connection to the
Internet is required, to which packet communication charge applies.
• The searching might not be successful if there are multiple wireless LAN (Wi-Fi®)
access points near to the product or the same channel is being used.
● Please back up* important content recorded or downloaded for the product to an
outside source. Content recorded to memory on the product sometimes disappears
or is altered by unexpected factors, such as static electricity or malfunction, repair,
mishandling, etc.
IEEE
• Do not use this product in places near electric products, AV and OA equipment, or
other magnetized devices or where electromagnetic waves are generated.
● Be careful of sound leakage from earphones in trains or other places with many people
around you.
■■ Backup■content■on■the■product
b/g/n
• Since a constant Internet connection is possible with the product, packet
communication may be performed automatically by some applications, resulting in high
packet communication charges. Therefore, subscription to a packet communication
lat late plan/discount service is recommended.
®
• Using this product near a TV, radio or similar appliance might cause reception
interference and disrupt TV images.
● Be careful about the copyright and portrait right when posting images you shot, etc.
on Internet homepages.
■■ HT20
Declaration of Conformity
IEEE
• The 2.4 GHz band used by wireless LAN (Wi-Fi ) and Bluetooth devices is shared
by various other devices. For this reason, the communication speed and connectable
range may be decreased, or disconnection may occur, due to interference from other
devices.
®
● Take care not to listen at ear-splitting volume for a long time, as it might afect
hearing.
● You are not allowed to copy, distribute, publish, modify or edit the data you shot,
recorded or downloaded using the product without the consent of the copyright holder,
except for personal use, under the copyright law.
In addition, do not use or modify portraits or names of other individuals without their
consent, as it might infringe on rights of portrait.
Note that shooting and recording may be restricted at some live performances, shows
and exhibitions even for personal use.
5GHz■Frequency■Band■Precautions
Wireless LAN (Wi-Fi®) function of this product uses 5 GHz band.
Using the 5.2 GHz band and 5.3 GHz band outdoors is prohibited
by the Radio Law.
The channels used on the product are as follows.
• Bluetooth® function: 2.4FH1
This product uses the 2.4 GHz band. FH-SS is used as the modulation scheme. The
interference distance is about 10 m or less.
• Wireless LAN (Wi-Fi ) function: 2.4DS/OF4
This product uses the 2.4 GHz band. DS-SS and OFDM are used as the modulation
schemes. The interference distance is about 40 m or less.
®
• Bandwidth to use: Full band
This means that full band can be used, and that band of mobile unit identiication devices
can be avoided.
• Available channels difer depending on the country.
• For use in an airplane, check with the airline company in advance.
* Packet communication charge does not apply to wireless LAN (Wi-Fi®) connection.
Applications
• Be sure to check the security of the application, then install it at your own risk. Some
applications might cause virus infection, damage various data, and send out your
location information, usage history or personal information stored in your cell phone via
the Internet.
• The Company assumes no responsibility for any operation problems that might be
caused by the applications you have installed. In such case, you may be charged a
repair fee even during the warranty period.
• The Company assumes no responsibility for any disadvantage brought to you or any
third party by applications you have installed.
• Depending on applications, microSD memory card is required when using the
application.
• Some applications prohibit the product from entering sleep mode while they are active,
or rapidly drain the battery while running in the background.
• Operational procedures and screen appearances of the applications preinstalled in the
product and those installed by you are subject to change without notice as a result of
version upgrade. In addition, operating procedures described in this manual may difer
from the actual procedures.
Speciic Absorption Rate (SAR) of Cell Phones
This model "LGL25" mobile phone complies with Japanese technical regulations and
international guidelines regarding exposure to radio waves.
This mobile phone was designed in observance of Japanese technical regulations
regarding exposure to radio waves* and limits to exposure to radio waves recommended
by a set of equivalent international guidelines. These international guidelines were set out
by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), which is in
collaboration with the World Health Organization (WHO), and the permissible limits include
a substantial safety margin designed to assure the safety of all persons, regardless of
age and health condition.
The Japanese technical regulations and international guidelines deine the limits using
a unit of measurement known as the Speciic Absorption Rate (SAR), which represents
the average amount of radio frequency energy absorbed by the human. The SAR limit for
mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone when tested for
use at the ear is 0.492 W/kg. The highest SAR value for this mobile phone when tested
for use on the body is 0.906 W/kg. There may be slight diferences in SAR levels among
individual products, but they all satisfy the limit.
The actual SAR of this mobile phone while talking on the phone can be well below that
indicated above. This is due to automatic changes in the power level of the mobile phone
to ensure it only outputs the minimum power required to communicate with a base
station. Therefore in general, the closer you are to a base station, the lower the power
output of the mobile phone.
This mobile phone can be used in positions other than against your ear. Use an accessory
such as a carrying case, etc. so that you can hold the product at least 1.5 cm away
from your body and also do not contain metal parts between the product and your body.
By doing this, this mobile phone complies with Japanese technical regulations and
international guidelines regarding exposure to radio waves.
The World Health Organization has stated that present scientiic information does not
indicate that use of mobile devices has any harmful efects on the human body. They
recommend that if you are still worried about your exposure then you can limit your talk
time or use a handsfree kit to keep the mobile phone away from your head and body.
If you would like to know more detailed information, please refer to the WHO website.
http://www.who.int/docstore/peh-emf/publications/facts_press/fact_english.htm
Please refer to the websites listed below if you would like to know more detailed
information regarding SAR.
○■Ministry■of■Internal■Afairs■and■Communications■Website:
http://www.tele.soumu.go.jp/j/ele/index.htm
○■Association■of■Radio■Industries■and■Businesses■Website:
http://www.arib-emf.org/index02.html■(in■Japanese■only)
○■au■Website:
http://www.au.kddi.com/
○■LG■Electronics■Inc.■Website:
Refer■to■"Speciications"■page■of■this■product.
http://www.lg.com/jp/mobile-phone■(in■Japanese■only)
(URL■are■subject■to■change■without■notice.)
* Technical regulations are deined by the Ministerial Ordinance Related to Radio Law
(Article 14-2 of Radio Equipment Regulations).
The product "LGL25" is declared to conform with the essential requirements of European
Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive
3.1(a), 3.1(b) and 3.2.
This mobile phone complies with the EU requirements for exposure to radio waves.
Your mobile phone is a radio transceiver, designed and manufactured not to exceed the
SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested
for compliance against the standard was 0.379 W/kg at the ear, and 0.808 W/kg when
worn on the body. To comply with the RF Exposure limits a distance of greater than 1.5
cm must be maintained from the user's body.
While there may be diferences between the SAR* levels of various phones and at various
positions, they all meet*** the EU requirements for RF exposure.
*The exposure standard for mobile phones employs a unit of measurement known as the
Speciic Absorption Rate, or SAR.
**The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg)
averaged over ten grams of tissue, recommended by The Council of the European Union.
The limit incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
***Tests for SAR have been conducted using standard operating positions with the phone
transmitting at its highest certiied power level in all tested frequency bands. Although
the SAR is determined at the highest certiied power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is because the phone
is designed to operate at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a base station antenna, the lower
the power output.
European Union Directives Conformance Statement
Hereby, LG Electronics Inc. declares that this product is in compliance with:
• The essential requirements and other relevant provisions of Directive 1999/5/EC
• All other relevant EU Directives
The above gives an example of a typical Product Approval Number.
Wi-Fi(WLAN) This device is intended for sale in Japan only.
This equipment may be operated in all European countries.
The 5150 - 5350 MHz band is restricted to indoor use only.
Important Safety Information
AIRCRAFT
Switch of your wireless device when boarding an aircraft or whenever you are instructed
to do so by airline staf. If your device ofers a 'light mode' or similar feature consult airline
staf as to whether it can be used on board.
DRIVING
Full attention should be given to driving at all times and local laws and regulations
restricting the use of wireless devices while driving must be observed.
HOSPITALS
Mobile phones should be switched of wherever you are requested to do so in hospitals,
clinics or health care facilities. These requests are designed to prevent possible
interference with sensitive medical equipment.
PETROL■STATIONS
Obey all posted signs with respect to the use of wireless devices or other radio equipment
in locations with lammable material and chemicals. Switch of your wireless device
whenever you are instructed to do so by authorized staf.
INTERFERENCE
Care must be taken when using the phone in close proximity to personal medical devices,
such as pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 15 cm be
maintained between a mobile phone and a pacemaker to avoid potential interference with
the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and
do not carry it in a breast pocket.
Hearing■Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid manufacturer to discuss
alternatives.
NOTE■:
Excessive sound pressure from earphones and headphones can cause
hearing loss.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
For■other■Medical■Devices■:
Please consult your physician and the device manufacturer to determine if operation of
your phone may interfere with the operation of your medical device.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment of and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit diferent from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help and for additional
suggestions.
Warning
The user is cautioned that changes or modiications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
FCC RF Exposure Information
This model phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The guidelines are based on standards that were developed by independent scientiic
organizations through periodic and thorough evaluation of scientiic studies. The
standards include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of measurement known as
the Speciic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests
are performed in positions and locations (e.g., at the ear and worn on the body) as required
by the FCC for each model.
The SAR value for this model handset when tested for use at the ear is 1.00 W/kg and
when worn on the body, as described in this user guide, is 1.02 W/kg.
Body-worn Operation
This phone was tested for typical body-worn operations with the back of the phone kept
1.0 cm from the body. To maintain compliance with FCC RF exposure
at a distance of 1.5
1.0 cm separation distance between your
requirements, use accessories that maintain a 1.5
body and the back of the phone. The use of belt clips, holsters and similar accessories
should not contain metallic components.
The use of accessories that do not satisfy these requirements may not comply with FCC
RF exposure requirements, and should be avoided.
The FCC has granted an Equipment Authorization for this model handset with all reported
SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR
information on this model handset is on ile with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID
ZNFLGL25.
Additional information on Speciic Absorption Rates (SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA) website at http://ctia.org/.
Export Administration
Regulations This product and its accessories may fall under the category of application of
Japan Export Control Regulations ("Foreign Exchange and Foreign Trade Law" and relevant
laws and regulations). U.S. Re-export Regulations (Export Administration Regulations) is
applied to this product and its accessories. If you export or re-export this product or its
accessories, please follow the necessary procedures at your own risk and expense. For
details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S.
Department of Commerce.
Intellectual Property Right
Trademarks
All■company■names■and■product■names■in■this■manual■are■either■trade■marks■or■
registered■trade■marks.
• The microSD logo, microSDHC logo, and microSDXC
logo are trademarks of SD-3C, LLC.
• Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth® SIG, Inc. LG Electronics Inc. have the rights of using
the above trademarks.
• Wi-Fi® is registered trademark of Wi-Fi Alliance®.
• iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion methods for Japanese
language.
iWnn© OMRON SOFTWARE Co., Ltd. 2008-2014 All Rights Reserved.
• Facebook and Facebook logo are trade marks or registered of Facebook, Inc.
• "NAVITIME" is a registered trademark of NAVITIME JAPAN Co., Ltd.
• Firefox®, Firefox® OS and Firefox logo® are trademarks of Mozilla Foundation in U.S.A.
• The product includes pictograms licensed by NTT DOCOMO, INC.
• All other company names and product names are trademarks or registered trademarks
of respective companies referred to in this manual.
OpenSSL■License
【OpenSSL■License】
Copyright■©■1998-2011■The■OpenSSL■Project.■All■rights■reserved.
This■product■includes■software■developed■by■the■OpenSSL■Project■for■use■in■the■
OpenSSL■Toolkit.■(http://www.openssl.org/)
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ''AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
【Original■SSLeay■License】
Copyright■©■1995-1998■Eric■Young■(eay@cryptsoft.com)■All■rights■reserved.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Open■Source■Software■Notice■Information■
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is
contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as the cost of media, shipping, and
handling) upon email request to opensource@lge.com. This ofer is valid for three (3) years
from the date on which you purchased the product.
Others
For■software■installed■in■this■product■or■part■of■the■installed■software,■you■are■
not■allowed■to■change,■translate■or■adapt,■reverse,■engineering,■decompile,■
reverse■assemble■them,■or■do■anything■related■to■the■above.
This■product■is■licensed■complying■with■the■MPEG-4■Visual■Patent■Portfolio■
License.■If■you■use■it■for■private■purpose■without■any■proits,■you■are■allowed■to■
use■them■only■when:
• Recording videos that are compliant with the standard of MPEG-4 Visual (hereinafter
referred to as MPEG-4 Video)
• Playing MPEG-4 Videos recorded personally by consumers not engaged in proit
activities
• Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA
For■further■utilizing■such■as■promotion,■in-house■use■or■proit-making■business,■
please■contact■MPEG■LA,■LLC■in■U.S.
• This product has been granted the licenses which code (i) AVC standard compliant
video (hereinafter stated as AVC video) based upon the AVC Portfolio License for
the individual use of customers, and non-commercial use, and/or the licenses which
decode (ii) VC-1 video. (this is restricted to the AVC video that has been coded
by customers who are not engaged in individual, and commercial activities, and/
or pertains to the provision of coded AVC video from video providers who have been
granted the licenses). For any other purposes, licence is not permitted even for the
implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to
http://www.mpegla.com
• This product has been granted the licenses which code (i) VC-1 standard compliant
video (hereinafter stated as VC-1 video) based upon the VC-1 Patent Portfolio License
for the individual use of customers, and non-commercial use, and/or the licenses
which decode (ii) VC-1 video. (this is restricted to the VC-1 video that has been coded
by customers who are not engaged in individual, and commercial activities, and/or
pertains to the provision of coded VC-1 video from video providers who have been
granted the licenses). For any other purposes, licence is not permitted even for the
implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to
http://www.mpegla.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:12:04 13:51:30+09:00
Modify Date                     : 2014:12:04 09:49:28-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:12:04 09:49:28-05:00
Format                          : application/pdf
Document ID                     : uuid:1c4fb0c0-c6c6-47d2-b06d-ea3477a76cd3
Instance ID                     : uuid:aafb5b43-30c6-4bd1-ac22-f679c9abcd4c
Page Count                      : 2

EXIF Metadata provided by EXIF.tools