LG Electronics USA M2294AJ LCD Monitor User Manual User s Manual H ok
LG Electronics USA LCD Monitor User s Manual H ok
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1013036 |
| Application ID | 6eDzv5SAJboNjwY/gPIlEg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 245.23kB (3065358 bits) |
| Date Submitted | 2008-10-09 00:00:00 |
| Date Available | 2008-10-09 00:00:00 |
| Creation Date | 2008-10-09 10:35:06 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2008-10-09 10:36:20 |
| Document Title | Microsoft Word - User_s Manual_H_ok.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | EMC CENTER |
Test Report Number: GETEC-E3-08-042 FCC Class B Certification APPENDIX H : USER’S MANUAL EUT Type: LCD Monitor FCC ID: BEJM2294AJ User’s Guide M1994A M2294A Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and give the information to your dealer when you ask for service. Before Connecting to the PC Stand Installation Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Insert the stand base into the product Attach the monitor to the Stand Base by turning the screw to the right. * Turn the screw by using the screw handle Screw Before Connecting to the PC Detaching Stand Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Place the set screen side down on a cushion or soft cloth. Detach the monitor to the Stand Base by turning the screw to the left. Turn the screw by using the screw handle Pull the stand base. Before Connecting to the PC Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range -5° ~ -2° 12°~ 18° Warning: When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). Theft prevention locking device Locking Device Use this locking cable (This has to be purchased separately if required.) to prevent theft. Name and Function of the Parts Name of the Remote Control Buttons TV/PC : TV/PC button Not working POWER TV/PC MTS INPUT A.PROG MEMORY/ERASE CAPTION POWER INPUT Input Each time you press the Input button it will change to AV Component RGB DVI HDMI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. AV Component RGB DVI HDMI MENU MUTE MTS FCR Not working CH A.PROG VOL ENTER PC: Automatic adjustment function (Operational for the analog signal only) VOL MEMORY/ERASE Not working CH CAPTION MENU REVIEW SLEEP APC DASP ARC/ Select a closed caption (AV only) Number buttons Inserting batteries into remote control. 1. Take out the battery cap. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cap. • Dispose of used batteries in the recycle bin to prevent environmental pollution. AAA Type Name and Function of the Parts Name of the Remote Control Buttons MUTE Switches the sound on or off. FCR Not working. CH ( MUTE FCR ) Buttons Up and Down Button. CH VOL ( VOL ENTER ) Buttons Volume Button VOL ENTER Button Use when functional adjustment is completed. CH MENU REVIEW SLEEP APC DASP ARC/ MENU Use this button to enter the On Screen Display menu. REVIEW Not working SLEEP : SLEEP Timer You can set a time period after which the all modes should switch itself to standby. Press the key repeatedly to select the number of minutes. _ _ _ (off) 240 10 20 30 180 120 90 60 APC Button(Auto Picture Control) Press repeatedly to select Clear, Optimum, Soft, User picture mode. DASP Button (Digital Auto Sound Processing) Use this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Sports, User sound tone. ARC/* To select the image size of the screen. • When AV mode: 16:9, Horizon, Zoom1,Zoom2, 4:3 • When RGB/DVI/HDMI/Component mode: 16:9, 4:3 Name and Function of the Parts Rear View COMPONENT IN S-VIDEO PB VIDEO RGB IN (PC) Ext. IN PR DVI-D VIDEO AC IN AUDIO AUDIO HDMI AUDIO IN (RGB/DVI) COMPONENT IN S-VIDEO VIDEO PB RGB IN (PC) Ext. IN PR VIDEO DVI-D AUDIO AUDIO IN (RGB/DVI) AUDIO HDMI Power Connector : Connect the power cord. HDMI Digital Signal Connector DVI Digital Signal Connector D-Sub Analog Signal Connector RGB, DVI Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack. AV Input Terminal Component Input Terminal Ext In Jack : Connect the TN300 Tuner. (Please refer to TN300 install guide.) Name and Function of the Parts AV Input Terminal S-VIDEO S-Video Input Terminal Video Input Terminal VIDEO AUDIO (MONO) Audio Input Terminal Connecting to External Devices Connecting to your PC 1. First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. Rear side of the product. COMPONENT IN S-VIDEO PB Ext. IN DVI-D VIDEO RGB IN (PC) PR VIDEO AC IN AUDIO AUDIO IN (RGB/DVI) AUDIO HDMI Connecting with the D-Sub signal input cable. RGB IN (PC) Rear side of the product. Macintosh Adapter (Not included) Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) Connecting with the DVI signal input cable. DVI-D Rear side of the product. 2. Connect the audio cable. Audio cable AUDIO IN (RGB/DVI) Rear side of the product. • Make sure to check the sound card connection terminal in the PC before connecting to the product. If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application. (For more details, refer to the sound card user’s guide.) - Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier. - *Line Out : The terminal connected to the speaker equipped with an amplifier. If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated with an amplifier. Connecting to External Devices 3. Connect the power cord. Rear side of the product. COMPONENT IN S-VIDEO PB Ext. IN DVI-D VIDEO RGB IN (PC) PR VIDEO AC IN 4. 1 AUDIO AUDIO IN (RGB/DVI) AUDIO HDMI Turn on power by pressing the power button on the product. Power button 2 Turn on the PC. 5. Select an input signal. Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the top side of the product. INPUT ENTER • Select RGB Input AV Component RGB DVI HDMI • Select DVI Input AV Component RGB DVI HDMI MENU MENU Each time you press the Input button it will change to AV Component RGB DVI HDMI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. Note • Directly connect to a grounded power outlet on the wall or a power bar with a ground wire. Connecting to External Devices Connecting to VCR/DVD Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 9). B When using the S-Video cable. A When using the RCA cable. • Connect to the S-Video input terminal to • Connect the input terminal with a watch high image quality movies. proper colour match. AUDIO 2. S-VIDEO AUDIO OUT VIDEO VIDEO OUT VCR/DVD (MONO) RCA Cable (Not included) Rear side of the Product S-VIDEO (MONO) VIDEO Rear side of the Product AUDIO 1. S-Video Cable (Not included) RCA Cable (Not included) VCR/DVD VIDEO OUT AUDIO OUT Select an input signal. Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the top side of the product. Input INPUT ENTER AV Component RGB DVI HDMI A When connecting with a RCA cable. • Select AV B When connecting with a S-Video cable. • Select AV MENU Each time you press the Input button it will change to AV Component RGB DVI HDMI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. Note • In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video cable is first. 10 Connecting to External Devices Connecting to Set-top Box /DVD (480i/576i/480p/576p/720p/1080i) 1. Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 9). • Connect the input terminal with a proper color match. Rear side of the Product COMPONENT IN PB PR VIDEO AUDIO Audio Cable Component Cable (Not included) (Not included) Set-top Box /DVD 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the top side of the product. INPUT Input ENTER AV Component RGB DVI HDMI • Select Component MENU Each time you press the Input button it will change to AV Component RGB DVI HDMI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. 11 Connecting to External Devices When watching HDMI from the DVD/Set-top Box 1. Connect the HDMI cable as shown in the figure below and then connect the power cord (See page 9). Rear side of the Product HDMI cable (not included) [Set-top Box/DVD] 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the top side of the product. INPUT ENTER Input • Select HDMI AV Component RGB DVI HDMI MENU Each time you press the Input button it will change to AV Component RGB DVI HDMI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. 12 Connecting to External Devices When watching RGB/DVI from the Set-top Box /DVD 1. Connect the D-sub cable, RCA/PC cable as shown in the below figure and then connect the power cord. (see page 9) [Rear side of the Product] RGB IN (PC) [Rear side of the Product] AUDIO IN (RGB/DVI) DVI-D AUDIO IN (RGB/DVI) RCA-Stereo cable (not included) DVI cable D-Sub cable [Set-top Box/DVD] 2. RCA-Stereo cable (not included) [Set-top Box/DVD] Select an input signal. Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the top side of the product. INPUT ENTER • Select RGB Input Input AV Component RGB DVI HDMI • Select DVI AV Component RGB DVI HDMI MENU MENU Each time you press the Input button it will change to AV Component RGB DVI HDMI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. 13 Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit INPUT MENU ENTER VOL Power Indicator Power Button MENU Button OSD Select/Adjust Button • This Indicator lights up blue when the display operates normally (On Mode). If the display is in Sleep (Energy Saving) Mode, this indicator colour changes to amber. • Use this button to turn the product on and off. • Use this button to show/hide the OSD (On Screen Display) menu screen. • Use this button to select an icon or adjust the setting in the OSD screen. • Use this button to select an icon or adjust the setting in the OSD screen. • Adjust the volume. 15 Volume 30 Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit ENTER Button • ENTER button is usually used in choosing the MENU. When there is no MENU on the screen pushing the ENTER button will give the information about the current input source. Input INPUT Button AV Component RGB DVI HDMI CVBS, S-Video HDTV, DVD D-Sub analog signal DVI Digital signal HDMI Digital signal AV Component RGB DVI HDMI MENU Each time you press the Input button it will change to AV Component RGB DVI HDMI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. 16 Adjusting the Screen OSD (On Screen Display) Menu Icon Function Description Adjusting the picture function. Picture Adjusting the sound function. Sound Adjusting the time function. Timer Selecting the special function. Special Adjusting the screen function. Screen Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. 17 Adjusting the Screen PICTURE ID adjust the picture function (RGB-PC/DVI-PC) APC (Auto Picture Control) Picture APC ACC XD Cinema Reset Clear Optimum Soft User MENU The APC function automatically adjusts the screen image quality. • Clear Select this option to display with a sharp image. • Optimum The most general and natural screen display status. • Soft Select this option to display with a mild image. • User Select this option to use the user-defined settings. Contrast : To adjust the contrast of the screen. Brightness : To adjust the brightness of the screen. User Contrast Brightness 100 100 MENU ACC (Auto Color Control) Picture APC ACC XD Cinema Reset 9300K 6500K sRGB User The ACC function automatically adjusts the screen colour set. • 9300K Slightly purplish white. • 6500K Slightly bluish white. • sRGB Slightly lower brightness. • User Select this option to use the user-defined settings. MENU User Red / Green / Blue Set your own colour levels. Red Green Blue MENU 19 Adjusting the Screen PICTURE ID adjust the picture function (RGB-PC/DVI-PC) XD XD is LG Electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. It's not available to use this function in RGB-PC or DVI-PC modes. Manual is activated after selecting the user of APC. (It's not working RGB-PC, DVI-PC mode.) Cinema (Function works in the following mode - AV, Component 480i/576i) When you watch the movie, this function adjusts the set to the best picture appearance. (It's not working RGB/DVI mode.) Reset Return to the default settings APC, ACC at the factory. 20 Adjusting the Screen PICTURE ID adjust the picture function (AV/Component/RGB-DTV/DVI-DTV/HDMI-DTV) APC (Auto Picture Control) Picture APC ACC XD Cinema Reset Clear Optimum Soft User MENU The APC function automatically adjusts the screen image quality. • Clear Select this option to display with a sharp image. • Optimum The most general and natural screen display status. • Soft Select this option to display with a mild image. • User Select this option to use the user-defined settings. Contrast : To adjust the contrast of the screen. Brightness : To adjust the brightness of the screen. Color : To adjust the colour to desired level. Sharpness : To adjust the clearness of the screen. Tint : To adjust the tint to desired level. User Contrast Brightness Color Sharpness Tint 100 50 60 50 MENU ACC (Auto Color Control) Picture APC ACC XD Cinema Reset MENU Cool Normal Warm User The ACC function automatically adjusts the screen color set. • Cool Slightly purplish white. • Normal Slightly bluish white. • Warm Slightly reddish white. • User Select this option to use the user-defined settings. User Red Green Blue Red / Green / Blue Set your own colour levels. MENU 21 Adjusting the Screen PICTURE ID adjust the picture function (AV/Component/RGB-DTV/DVI-DTV/HDMI-DTV) XD Picture APC ACC XD Cinema Reset Auto Manual XD is LG Electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. Manual is activated after selecting the user of APC. MENU Cinema (Function works in the following mode - AV, Component 480i) When you watch the movie, this function adjusts the set to the best picture appearance. Reset Return to the default settings APC, ACC, XD, Cinema at the factory. 22 Troubleshooting No image is displayed ● Is the product's power cord connected? • Check if the power cord is properly connected to the outlet. ● Is the power indicator turning on? • See if the power switch is turned on. ● Power is on, power indicator is blue but the screen appears extremely dark. • Adjust brightness and contrast again. ● Does the power indicator look amber? • If the product is in power saving mode, move the mouse or press any key. • In DVD Player or Set-top Box, check the power status of connected device. ● Does the 'Out of range' message appear? • The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this user's guide. * Maximum resolution M1994A : RGB : 1440 X 900 @75 Hz DVI : 1440 X 900 @60 Hz M2294A : 1680 X 1050 @60 Hz ● Does the 'Check signal cable' message appear? • The signal cable between PC and product is not connected. Check the signal cable. • Press the 'INPUT' button in the remote control to check the input signal. 'Unknown Product' message appears when the product is connected. ● Did you install the driver? • Install the product driver, which is provided with the product, or download it from the web site. (http://www.lge.com) • See if the plug&play function is supported by referring to the video card user's guide. Note * Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. * Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. 27 Specifications The product specifications can change without prior notice for product improvement. M1994A LCD Panel Screen Type 19 inches Wide (48.133 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 48.133 cm 0.2835 mm Pixel Pitch Video Signal Max. Resolution RGB : 1440 X 900 @75 Hz DVI : 1440 X 900 @60 Hz Recommended Resolution 1440 X 900 @60 Hz Horizontal Frequency 28 - 83 kHz Vertical Frequency 56 - 75 Hz Synchronization Type Separate Sync, Digital S-Video, Composite video, D-Sub Analog, DVI-D, HDMI, PC Audio In, Headphone/Earphone, component Input Connector Power Rated Voltage Power Consumption AC 100-240V~ 50/60Hz 0.8A On Mode : 50 W (Typ.) Sleep Mode ≤ 1 W (RGB) Off Mode ≤ 1W Tilt Tilt Range -5˚ ~ 15˚ Dimension/Weight Size (WxDxH) 456.2 mm x 193.2 mm x 394.7 mm Weight (excl. package) 4.06 kg (8.93 Ibs) Environmental Conditions Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% Storage Condition Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90% 30 Specifications The product specifications can change without prior notice for product improvement. M2294A LCD Panel Screen Type 22 inches Wide (55.867 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 55.867 cm 0.282 mm Pixel Pitch Video Signal Max. Resolution RGB : 1680 X1050 @60 Hz DVI : 1680 X1050 @60 Hz Recommended Resolution 1680 X1050 @60 Hz Horizontal Frequency 28 - 83 kHz Vertical Frequency 56 - 75 Hz Synchronization Type Separate Sync, Digital S-Video, Composite video, D-Sub Analog, DVI-D, HDMI, PC Audio In, Headphone/Earphone, component Input Connector Power Rated Voltage Power Consumption AC 100-240V~ 50/60Hz 0.9A On Mode : 50 W (Typ.) Sleep Mode ≤ 1 W (RGB) Off Mode ≤ 1W Tilt Tilt Range -5˚ ~ 15˚ Dimension/Weight Size (WxLxH) 521.7 mm x 193.2 mm x 435.4 mm Weight (excl. package) 4.9 kg (10.78 Ibs) Environmental Conditions Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% Storage Condition Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90% 31 Specifications PC Mode – Preset Mode It's not support in HDMI-PC mode. M1994A Preset mode 10 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 * 1~13 : RGB mode Horizontal Frequency (kHz) Horizontal Vertical Frequency (Hz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 Preset mode Frequency (kHz) 70 60 75 60 75 60 75 75 60 75 11 12 13 1440 x 900 1440 x 900 1440 x 900 55.5 55.935 70.635 Vertical Frequency (Hz) 60 60 75 * 1~12 : DVI mode M2294A Preset mode 10 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 Horizontal Frequency (kHz) Horizontal Vertical Frequency (Hz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 70 60 75 60 75 60 75 75 60 75 Preset mode Frequency (kHz) 11 12 *1 *2 *4 *5 *6 720 x 480/60p 720 x 480/60p 720 x 576/50p 1280 x 720/50p 1280 x 720/60p 1280 x 720/60p 1920 x 1080/60i 1920 x 1080/60i 1920 x 1080/50i 64.674 65.290 60 60 Power Indicator DTV -Timing Preset mode 1680 x 1050 1680 x 1050 Vertical Frequency (Hz) Horizontal Frequency (kHz) 31.47 31.5 31.25 37.5 44.96 45 33.72 33.75 28.125 Vertical Frequency (Hz) 60 60 50 50 60 60 60 60 50 * : User have to select directness PC or DTV when using the PC or the Set-top box this resolution. 32 Mode On Mode Sleep Mode Off Mode Product Blue Amber Off Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Products with the “CE” Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive (73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms : • EN 55022 ; Radio Frequency Interference • EN 55024 ; Electromagnetic Immunity • EN 61000-3-2 ; Power Line Harmonics • EN 61000-3-3 ; Voltage Fluctuations • EN 60950-1 ; Product Safety If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures: NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. TCO'99 (TCO'99 applied model only) NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B 01 Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Development’s website http://www.tcodevelopment.com or may be ordered from: TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO’99 approved and labelled products may also be obtained at http://www.tcodevelopment.com There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative* processes when not disposed of in accordance with strict standards for disposal. What does labelling involve? The product meets the requirements for the TCO’99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. TCO’99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO’99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Mercury** Mercury is sometimes found in batteries, relays and switches. TCO’99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and 02 Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Noise emissions Ecology • The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 • Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. Lead** Lead can be found in picture tubes, display screens, solders and capacitors. TCO’99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________ The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. * Bio-accumulative is defined as substances which accumulate in living organisms. **Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO’03 (TCO’03 applied model only) For more information, please visit www.tcodevelopment.com English Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Ergonomics • Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. Energy • Energy-saving mode after a certain time – beneficial both for the user and the environment • Electrical safety LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Emissions • Electromagnetic fields 03 Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einfließen lassen. Zusätzliche Informationen über unsere ‘grüne’ Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our ‘green’ policies. http://www.lge.com/about/environment/html/Recycling.jsp Français Information sur la protection del’environnement LGE. a publié sa 'Déclaration en faveur d’un environnement plus propre' en 1994 et celle-ci est restée, depuis lors, un principe directeur de notre entreprise. Cette déclaration a servi de base à notre réflexion et nous a permis de prendre en compte à la fois les aspects économiques et sociaux de nos activités, tout en respectant l’environnement. Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkündete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklärung für eine sauberere Umwelt). Seitdem dient dieses Ideal als führendes Prinzip des Unternehmens. Diese Erklärung war die Basis für die Durchführung von umweltfreundlichen Aktivitäten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die Überlegungen mit einbezogen wurden. Wir fördern Aktivitäten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezüglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schädlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Nous encourageons les activités en faveur de la préservation de l’environnement et c’est dans cet esprit que nous développons nos produits : nous réduisons au minimum les matières dangereuses qui entrent dans leur composition et l’on ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui présentent un risque pour l’environnement. Il est donc important que celui-ci soit recyclé après usage. LGE. traite les moniteurs en fin de cycle conformément à une méthode de recyclage respectueuse de l’environnement. Nous reprenons nos produits et les recyclons dans plusieurs sites répartis dans le monde entier. De nombreux composants sont réutilisés et recyclés, et les matières dangereuses, ainsi que les métaux lourds, sont traités selon un procédé écologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un l’un de nos représentants. Informationen zum Thema Recycling Dieser Monitor enthält Teile, die umweltschädlich sein können. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er außer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rücknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schädliche Substanzen und Schwermetalle werden durch umweltverträgliche Verfahren behandelt. Falls Sie mehr über unser Recyclingprogramm erfahren möchten, wenden Sie sich bitte an Ihren lokalen LGHändler oder einen Unternehmensvertreter von LG. Nous voulons agir pour un monde plus propre et croyons au rôle de notre entreprise dans l’amélioration de l’environnement. Pour plus de renseignements sur notre politique “verte”, rendez visite à notre site : http://www.lge.com/about/environment/html/Recycling.jsp 04 Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attività a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attività a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dell’ambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non è presente il cadmio. Promocionamos actividades orientadas a la conservación del medio ambiente y desarrollamos nuestros productos específicamente para que se ajusten a la filosofía que protege el entorno. Reducimos al máximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Información para el reciclaje Este monitor puede contener piezas que entrañen riesgos medioambientales. Es importante reciclar este monitor después de su utilización. LGE. trata todos los monitores usados siguiendo un método de reciclaje que no daña al entorno. Contamos con diversos sistemas de recuperación y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dañinas y los metales pesados se tratan siguiendo un método que no perjudique al medio ambiente. Si desea obtener más información acerca del programa de reciclaje, póngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Informazioni per il riciclaggio Il monitor può presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. È importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dell’ambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, è consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Basamos nuestra visión y nuestras políticas en un mundo más limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolución como empresa. Visite nuestra página Web para obtener más información sobre nuestras políticas ecológicas. http://www.lge.com/about/environment/html/Recycling.jsp Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo più pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica “verde”. http://www.lge.com/about/environment/html/Recycling.jsp Português Informações relacionadas à preservação ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declaração da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde então como um princípio administrativo de orientação. A Declaração é a base que nos tem permitido realizar atividades favoráveis ao ambiente com consideração atenta aos aspectos econômicos, ambientais e sociais. Espanõl Información para la conservación medioambiental LGE. presentó la 'Declaración para un entorno más limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaración es la base que nos ha permitido llevar a cabo tareas que Promovemos atividades de preservação ambiental e desenvolvemos nossos produtos para englobar 05 Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente. É importante que ele seja reciclado após o uso. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LGvertegenwoordiger of een LG-vestiging. A LGE. cuida de todos os monitores descartados através de um método de reciclagem agradável ao ambiente. Há vários sistemas de devolução e reciclagem atualmente em operação no mundo. Muitas peças serão reutilizadas e recicladas e as substâncias nocivas e os metais pesados passarão por tratamento através de um método favorável ao ambiente. Para obter mais informações sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa visão e nossas políticas relacionadas a um mundo mais limpo selecionando a questão do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informações sobre nossas políticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian »ÌÙÓχˆËˇ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ Nederlands ¬ 1994 „Ó‰Û ÍÓÔÓ‡ˆËˇ LGE ÓÔÛ·ÎËÍÓ‚‡Î‡ 'ƒÂÍ·‡ˆË˛ LG ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚', ÍÓÚÓ‡ˇ Ò ÚÂı ÔÓ ÒÎÛÊËÚ ÓÒÌÓ‚Ì˚Ï ÔË̈ËÔÓÏ ÛÔ‡‚ÎÂÌˡ. Õ‡ ÓÒÌÓ‚Â ˝ÚÓÈ ‰ÂÍ·‡ˆËË Ï˚ ÒÏÓ„ÎË Ô‰ÔËÌˇÚ¸ ‰ÂÈÒڂˡ, Ó·ÂÒÔ˜˂‡˛˘Ë ·ÂÁÓÔ‡ÒÌÓÒÚ¸ ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÔË ˝ÚÓÏ ‰ÓÎÊÌÓ ‚ÌËχÌË ˝ÍÓÌÓÏ˘ÂÒÍËÏ, ˝ÍÓÎӄ˘ÂÒÍËÏ Ë ÒӈˇθÌ˚Ï ‡ÒÔÂÍÚ‡Ï. Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Ã˚ ÒÚËÏÛÎËÛÂÏ ‰ÂˇÚÂθÌÓÒÚ¸ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚, Û‰ÂΡˇ ÓÒÓ·Ó ‚ÌËχÌË ‡Á‡·ÓÚÍ ̇¯ÂÈ ÔÓ‰Û͈ËË ‚ ÒÓÓÚ‚ÂÚÒÚ‚ËË Ò ÍÓ̈ÂÔˆËÂÈ ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË. Ã˚ Ò‚Ó‰ËÏ Í ÏËÌËÏÛÏÛ ÒÓ‰ÂʇÌË ÓÔ‡ÒÌ˚ı ‚¢ÂÒÚ‚ ‚ ̇¯ÂÈ ÔÓ‰Û͈ËË. Õ‡ÔËÏÂ, ‚ ̇¯Ëı ÏÓÌËÚÓ‡ı ‚˚ Ì ̇ȉÂÚ ͇‰Ïˡ. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. »ÌÙÓχˆËˇ ÔÓ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ ›ÚÓÚ ÏÓÌËÚÓ ÏÓÊÂÚ ÒÓ‰Âʇڸ ÍÓÏÔÓÌÂÌÚ˚, ÍÓÚÓ˚ ÏÓ„ÛÚ Ì‡ÌÂÒÚË Û˘Â· ÓÍÛʇ˛˘ÂÈ Ò‰Â. 06 Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡. «‡ ·ÓΠÔÓ‰Ó·ÌÓÈ ËÌÙÓχˆËÂÈ ÔÓ Ì‡¯ÂÈ ÔÓ„‡ÏÏ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ó·‡˘‡ÈÚÂÒ¸ Í ÏÂÒÚÌÓÏÛ ÔÓÒÚ‡‚˘ËÍÛ ËÎË Ô‰ÒÚ‡‚ËÚÂβ ÍÓÔÓ‡ˆËË LG. Ã˚ ÓËÂÌÚËÛÂÏÒˇ ̇ Ó·ÂÒÔ˜ÂÌË ˝ÍÓÎӄ˘ÂÒÍÓÈ ·ÂÁÓÔ‡ÒÌÓÒÚË, ÒÚ‡‚ˇ Ò· ˆÂθ˛ „ÎÓ·‡Î¸ÌÛ˛ Á‡˘ËÚÛ ÓÍÛʇ˛˘ÂÈ Ò‰˚. ƒÓÔÓÎÌËÚÂθÌÛ˛ ËÌÙÓχˆË˛ Ó Ì‡¯ÂÈ ÔÓÎËÚËÍ ÔÓ Óı‡Ì ÓÍÛʇ˛˘ÂÈ Ò‰˚ ‚˚ ÏÓÊÂÚ ̇ÈÚË Ì‡ ̇¯ÂÏ Ò‡ÈÚÂ: http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) 07 Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni più dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto. (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Swedish Kassering av din gamla apparat 1.När den här symbolen med en överkryssad soptunna på hjul sitter på en produkt innebär det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter bör kasseras via andra vägar än de som finns för hushållsavfall, helst via för ändamålet avsedda uppsamlingsanläggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat på rätt sätt så bidrar du till att förhindra negativa konsekvenser för miljön och människors hälsa. 4.Mer detaljerad information om kassering av din gamla apparat kan får av kommunen, renhållningsverket eller den butik där du köpte produkten. French Élimination de votre ancien appareil 1.Ce symbole, représentant une poubelle sur roulettes barrée d'une croix, signifie que le produit est couvert par la directive européenne 2002/96/EC. 2.Les éléments électriques et électroniques doivent être jetés séparément, dans les videordures prévus à cet effet par votre municipalité. 3.Une élimination conforme aux instructions aidera à réduire les conséquences négatives et risques éventuels pour l'environnement et la santé humaine. 4.Pour plus d'information concernant l'élimination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures ménagères ou encore la magasin où vous avez acheté ce produit. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto è riportato il simbolo di 08 Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fås ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du købte produktet. Finnish Vanhojen laitteiden hävittäminen 1.Tämä merkki tuotteessa tarkoittaa, että tuote kuuluu sähkö- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. 2.Kaikki elektroniset laitteet ovat ongelmajätettä, joten ne on toimitettava paikalliseen keräyspisteeseen. 3.Vanhan laitteen asianmukainen hävittäminen ehkäisee mahdollisia ympäristöön ja terveyteen kohdistuvia haittavaikutuksia. 4.Lisätietoa vanhan laitteen hävittämisestä saat ottamalla yhteyden paikallisiin viranomaisiin, kierrätyskeskukseen tai myymälään, josta ostit laitteen. Greek ∞fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ 1.ŸÙ·Ó ¤Ó· ÚÔ˚fiÓ ‰È·ı¤ÙÂÈ ÙÔ ‰‡Ì‚ÔÏÔ ÂÓfi˜ ‰È·ÁÚ·Ì̤ÓÔ˘ οϷıÔ˘ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÙfiÙ ÙÔ ÚÔ˚fiÓ Î·Ï‡ÙÂÙ·È ·fi ÙËÓ E˘Úˆ·˚΋ O‰ËÁ›· 2002/96/EOK. 2.H ·fiÚÚÈ„Ë fiÏˆÓ ÙˆÓ ËÏÂÎÙÚÈÎÒÓ Î·È ËÏÂÎÙÚÔÓÈÎÒÓ ÚÔ˚fiÓÙˆÓ Ú¤ÂÈ Ó· Á›ÓÂÙ·È ¯ˆÚÈÛÙ¿ ·fi Ù· ÁÂÓÈο ÔÈÎȷο ·ÔÚÚ›ÌÌ·Ù· ̤ۈ ηıÔÚÈÛÌ¤ÓˆÓ ÂÁηٷÛÙ¿ÛÂˆÓ Û˘ÏÏÔÁ‹˜ ·ÔÚÚÈÌÌ¿ÙˆÓ, ÔÈ Ôԛ˜ ¤¯Ô˘Ó ‰ËÌÈÔ˘ÚÁËı› ›Ù ·fi ÙËÓ Î˘‚¤ÚÓËÛË ‹ ·fi ÙȘ ÙÔÈΤ˜ ·Ú¯¤˜. 3.H ÛˆÛÙ‹ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜ ı· ‚ÔËı‹ÛÂÈ ÛÙËÓ ·ÔÙÚÔ‹ Èı·ÓÒÓ ·ÚÓËÙÈÎÒÓ Û˘ÓÂÈÒÓ ˆ˜ ÚÔ˜ ÙÔ ÂÚÈ‚¿ÏÏÔÓ Î·È ÙËÓ ˘Á›· ÙÔ˘ ·ÓıÚÒÔ˘. 4.°È· ÈÔ ÏÂÙÔÌÂÚ›˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙËÓ ·fiÚÚÈ„Ë Ù˘ ·ÏÈ¿˜ Û·˜ Û˘Û΢‹˜, ÂÈÎÔÈÓˆÓ‹ÛÙ Ì ÙÔ ·ÚÌfi‰›Ô ÙÔÈÎfi ÁÚ·Ê›Ô, ˘ËÚÂÛ›· ‰È¿ıÂÛ˘ ÔÈÎÈ·ÎÒÓ ·ÔÚÚÈÌÌ¿ÙˆÓ ‹ ÙÔ Ì·Á·Í› ·fi ÙÔ ÔÔ›Ô ·ÁÔÚ¿Û·Ù ÙÔ ÚÔ˚fiÓ. German Entsorgung von Altgeräten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europäischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom Hausmüll über dafür staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemäßen Entsorgung des alten Geräts vermeiden Sie Umweltschäden und eine Gefährdung der persönlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Geräts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das Produkt erworben haben. Spanish Cómo deshacerse de aparatos eléctricos y electrónicos viejos 1.Si en un producto aparece el símbolo de un contenedor de basura tachado, significa que éste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos eléctricos o electrónicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a través de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pública. 4.Para obtener más información sobre cómo deshacerse de sus aparatos eléctricos y electrónicos viejos, póngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquirió el producto. Danish Sådan smider du dit gamle apparat ud 1.Når der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjælp af specielle indsamlingsfaciliteter, der er organiseret af staten 09 Regulatory Information cont. Portuguese Hungarian Slovak Polish Czech Croatian 10 Regulatory Information cont. Estonian Latvian Lithuanian 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 37 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:54ed9fde-283d-4dc9-b132-63fef5e777a7 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2008:10:09 10:35:06+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:10:09 10:36:20+09:00 Metadata Date : 2008:10:09 10:36:20+09:00 Document ID : uuid:3c218990-ea46-4127-b101-928c5cb36f31 Format : application/pdf Creator : EMC CENTER Title : Microsoft Word - User_s Manual_H_ok.doc Author : EMC CENTEREXIF Metadata provided by EXIF.tools