LG Electronics USA MC500 Cellular CDMA Phone with Bluetooth User Manual

LG Electronics USA Cellular CDMA Phone with Bluetooth Users Manual

Users Manual

1We are pleased that you have purchased the LG MC500 mobile phone, state-of-the-art and compact.It is designed with the latest digital mobile communication technology, aiming to facilitate your operation.
Part 15.21 statement" Change or Modifications that are not expressly approved by the manufacturer could void        the user's authority to operate the equipment. “Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.
Part 15 Class B ComplianceThis device and its accessories comply with part15 of FCC rules.Operation is subject to the following two conditions:(1) This device & its accessories may not cause harmful interference.(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.Body-worn OperationThis device has been tested for typical body-worn operations with the distance of 0.79inches (2.0cm) from the user’s body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.79inches(2.0cm) must be maintained from the user's body.Additionally, Belt clips, holsters & other body-worn accessories may not containmetallic components.
LG MC500  |  User Guide6Getting to know your phoneAnswer key  Make or answer a call.End/Power key   Press and hold it to power on or off your mobile phone. Press it to end a conversation or reject an incoming call. Press it to return to the standby screen.Delete texts or digits from the display and return to the upper-level menus. Caution: Placing a heavy object on your mobile phone or keeping it in your pocket may affect the functions of its LCD display and touch screen.
7Memory card slotLock/unlock keyCamera keyTouch penport/Earpiece portSide keys (volume keys)TIP!: To connect a USB data cable, ensure that your mobile phone is powered on.
LG MC500  |  User Guide8Getting to know your phoneBattery compartment coverBatteryUIM card slotCamera lens
9Installing UIM Card and Battery 1   Removing battery compartment coverAs shown in the figure below, remove the battery compartment cover.2  Removing batteryLift the battery bottom and take it out from the battery compartment. Caution: Do not take out the battery when your mobile phone is powered on to avoid damaging your mobile phone.3   Installing UIM cardInsert the UIM card into the UIM card slot.Ensure that the golden contact area faces downwards.
LG MC500  |  User Guide10Installing UIM Card and Battery4  Installing batteryInsert the battery top into the top of the battery compartment. Ensure that the battery contact point aligns with the top of the battery compartment. Press the battery bottom until the battery clicks into place.5   Installing battery compartment coverSlide the battery compartment cover along the bottom of your mobile phone until it clicks into place.6  ChargingOpen the cover of the charger slot on the side of the MC500.
11Installing memory cardUsing a memory card can expand the available storage space of your mobile phone.To insert a memory card, insert it into the card slot until it clicks into place. Ensure that the golden contact area faces upwards, as shown in the figure.Formatting memory cardIf your memory card has been formatted, you can use it.If you memory card is not formatted, format it first. 1   Touch   on the standby screen, and then touch   and select Phone settings.2   Touch Memory Status, and then select Initialize Memory.3   Enter the security password to format your memory card. After the memory card is formatted, you can use it.Memory Card
LG MC500  |  User Guide12Menu MapTouch   Then, upper-level menus are displayed on the standby screen.  Communicate  eSurfing  Dialling  Speed dials  Contacts  Call manager  Messages   Entertainment  My stuff  Camera  MP3  FM radio  Game  Doc. viewer          Utilities  Organizer  Alarms  Voice recorder  Skech memo  Dictionary  Calculator  Tools  Settings  Sound/vib  Display  Phone settings  Touch settings  Bluetooth  USB connection
13Standby screenOn the main screen, you can access all menu options, use the speed dial function and carry out other corresponding operations.Touch screen tipsYou can familiarize yourself with touch screen on the main screen.To select an item, please touch its icon.To scroll items in a list, please touch the last seen item and then use your finger tip to slide upwards on the screen.The list will scroll upwards so that you can see more items.•  Because the touch screen is so sensitive that you just need to touch it slightly.•  Use your finger tip to slightly touch your desired item.Do not touch other items nearby.•  When the screen indicator is off, press any key to restore the main screen. Shortcut keysShortcut keys allow you to access commonly used functions just by one touch.  Slightly touch it to display a complete menu, which contains four sub-menus. Slightly touch each sub-menu to display more items.  Slightly touch it to display a dial so that you can make a call.  Slightly touch it to display the Information.  Slightly touch it to display your phone book, so that you can easily find the number of the desired person.
LG MC500  |  User Guide14Standby screenStatus barThe status bar displays various icons to indicate such information as signal strength, new message, battery level, and the use of Bluetooth.The table below lists the meanings of various icons on the status bar. Icon DescriptionNetwork signal strength (indicated by the number of segments)Battery levelNew text messageThe alarm is set and started.In User modeIcon DescriptionIn Super modeIn Mute modeIn Vibrate modeRoaming service in use Fly mode selectedBluetooth enabled
15When using a mobile phone, you always need to enter texts. For example, write a short message, enter the name to be saved in the phone book, and write a memo. Six text entry modes are available: Pinyin, numeric, lower-case English letters, upper-case English letters, English and stroke.Take the edit panel as an example:PinyinExample: To enter “人人”, select ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-?. Slightly touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? and ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-?, and then slightly touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? twice. Finally, select “人人”.Numeric entry modeSlightly touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? and select ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-?. Slightly touch numeric keys to enter digits.English letter entry modeExample: To enter “Work”, slightly touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? and select ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-?.Slightly touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-?, and then touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? three times, ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? three times and ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-? twice.Stroke entry modeEnter strokes in order of writing a Chinese character. Example: To enter “人”, slightly touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? and select ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-?. Select ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-?, ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-?, ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tu vpqrsabc- gh idefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TU VPQRSABC- GH IDEF^^ /-? and ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-? in order. Slightly touch “人” at last.Symbol entry modeIn the text edit mode, slightly touch ABCwxyz 笔划拼音^^/?123 笔划拼音mnojkl tuvpqrsabc- ghidefAbcWXYZ 笔划拼音^^/?123 笔划拼音MNOJKL TUVPQRSABC- GHIDEF^^/-? to enter various symbols or special symbols.Text Entry Modes
LG MC500  |  User Guide16CommunicationsMaking a callBest ToneSelect it to directly connect to the Best Tone Service portal of China Telecom. I-musicSelect it to directly connect to the Best Tone Service portal of China Telecom.DownloadSelect it to start the software manager, allowing you to download programs and games.UIM card applicationSelect it to enjoy various information services.VnetSelect it to directly connect to Vnet service portal.DialMaking a call1   Slightly touch   to display the keypad.2   Enter numbers to be dialed. To delete a digit, slightly touch 播放添加3.3   Slightly touch 播放添加3 or press   to initiate a call.4   To end a conversation, press  .TIP!: Press and hold 播放添加3 to display the prefix of an international number, “+”, which is replaced with an international call access code during making a call.Dialing from phone book1   Slightly touch   on the standby screen to display the phone book.2   Slightly touch the desired contact person in the phone book list. If there are multiple numbers corresponding to the contact
Using Phone MenUs17person, touch the number to be dialed.Answering and rejecting an incoming callWhen the phone rings, press   to answer a call.Press   to reject an incoming call. Menus available during a conversationIf you are making a conversation, you can also carry out various operations on the phone. During a conversation, slightly touch 播放添加3 to select the desired menu.Shortcut KeysMaking a callSet a shortcut key for a phone number. Then, you can use the speed dial function by pressing the shortcut key.•  If you set “3” as the shortcut key of a phone number, press and hold 播放添加3 to speed dial the phone number.•  You can specify shortcut keys for the phone numbers stored in the mobile phone only.  CoMMUniCations
LG MC500  |  User Guide18CommunicationsPhone BookNewSelect the storage place to add a phone book entry.SearchOn the standby screen, slightly touch   to display the phone book list, which contains all saved phone numbers. Select a phone number, and then slightly touch 播放添加3. Then, you can carry out corresponding operations.Last SearchedSelect it to view the last searched phone number.Group ManagementSelect it to modify group names or group ring tones.Phone InfoSelect it to display your phone model, edit phone numbers saved in the UIM card, and edit E-mails.CopySelect it to copy a phone book entry.MoveSelect it to move a phone book entry.Delete AllSelect it to delete all the phone numbers saved in the phone or UIM card.CapacitySelect it to display capacity utilization of the phone or UIM card.SettingsSet storage place : Select it to choose where to save a phone number.  Options are: Phone/ UIM card UIM/ Phone & UIM card &UIM/ Prompt every time.
Using Phone MenUs19Search type : Select it to choose a search type.  Options are: Common/ Group.Call ManagementCall RecordsAll Calls : Select it to display all calls.Missed Calls : Select it to display the list of calls missed recently.Dialed Calls : Select it to display the list of calls dialed recently.Received Calls : Select it to display the list of calls received recently.Memo : Select it to temporarily save one phone number or other digits during a conversation.Call TimingSelect it to check the last conversation, conversation duration (dialed call or received call), total conversation duration, and sent short messages.The conversation duration may differ from the actual charged duration.  CoMMUniCations
LG MC500  |  User Guide20CommunicationsReject CallSelect it to set the phone numbers and groups to be rejected.Using this function requires the entry of your security password.Call SettingsConversation Volume Select it to adjust volume during a conversation.Call Transfer  •  Unconditional Transfer :This option enables you to transfer all the incoming calls to the specified phone number.•  Transfer On Busy : When you are busy on the phone, an incoming call will be transferred to the specified phone number.•  Transfer On No Reply : This option enables you to transfer all the incoming calls that you do not answer.•  Default Call Transfer : When your phone cannot connect to the network or is powered off, incoming calls are transferred to the specified phone number.•  Cancel All Transfer :This option enables you to cancel all preset transfer.Call WaitingIf you activate this function, you phone will play a special alert tone to tell you an incoming call during a conversation.You can answer such an incoming call.IP Dialing SettingDial the specified digits before dialing the phone number to save costs.
Using Phone MenUs21MessagesIf you receive a message during a conversation, your phone will play a specified alert tone.In standby mode, slightly touch   to directly display the Messages menu.NewSelect it to create a text message, voice message, or multimedia message.1   Slightly touch the receiver name to enter the receiver’s phone number or slightly touch 播放添加3 to select the desired number from the last used number, phone book, or recent call list.2   Slightly touch the content area to enter the message content. You can change the entry mode when editing a message.3   Slightly touch the down scroll bar to select whether to save the message and the message level.TIP!: The message level options are Common/ Urgent/ Extra Urgent, which is irrelative to the speed of sending a message.Message InboxWhen you receive a message, you phone will prompt you.The received message will be saved in the message inbox.If there are any un-read messages in the message inbox, the   icon will be displayed.Card Message InboxMessages in the card message inbox are saved in the card. Storage capacity of different cards differs.TIP!: Messages in the card message inbox can be moved to the message inbox. Similarly, the messages in the message inbox can be moved to the card message inbox.  CoMMUniCations
LG MC500  |  User Guide22CommunicationsMessage OutboxThis option allows you to view the messages sent successfully.Draft FolderThis option allows you to view the messages saved in advance and those which are not sent successfully.Interactive MailboxYou can receive notification messages, which may inform you of downloading ring tones or pictures from the specified address.Voice MailboxThis function requires network support. Therefore, in some regions, this function cannot be used.Frequent WordsThis option allows you to edit the words that are frequently used in messages and save them.Delete MessageThis option allows you to clear the message inbox, message outbox, card message inbox, draft folder, voice mailbox, and trash box.Junk MessageThis option allows you to view junk messages and junk numbers.Message SettingsCommon SettingsIncoming Message Alert Type : This option allows you to set the alert type of receiving a message.Incoming Message Alert Frequency : This option allows you to set how many times of informing you of receiving a text message, voice message/multimedia message, and interactive message.Message Alert Tone : This option allows you to set the alert tone type and volume of receiving a text message, voice message,
Using Phone MenUs23multimedia message, and interactive message.Capacity : This option allows you to check utilization of the message inbox, message outbox, draft folder, card message inbox, and trash box.Text Message SettingsReceived Message Content Alert : This option allows you to determine whether to only prompt that you have received a message or to display the message content.Message Background : This option allows you to set the background of received messages.Message Color : This option allows you to set text color of received messages.Auto DeleteDisplay Phone Book Photos : If this option is set to Yes, when the message inbox is full after receiving a new message, the message read earliest in the message inbox will be automatically deleted.Message Valid Period : This option allows you to set the time for saving messages in the short message center.Status Report : If you set it to Enable, you can check whether messages have been successfully sent.IN Message : IN message service is a series of message value-added products launched by China Telecom, including return notification for calling subscriber, short message transfer, and timed short messages.Multimedia Message SettingsAuto Download : This option determines whether to activate or deactivate automatic download.Status Report : This option determines whether to allow requesting a status report.Deliver Report : This option determines whether to allow   CoMMUniCations
LG MC500  |  User Guide24Communicationsdelivering a report.Valid Time : This option allows you to set the time for saving messages in the short message center.Account/Password : This option allows you to check your account and password.Customer ServiceHotlineSelect it to directly dial the customer service hotline of China Telecom, 10000.Palm Business HallSelect it to access the online business hall of China Telecom.Comm. AssistantSelect it to dial 11843490004, the secretary voice service phone number of Best Tone Service.Query&Cancel ServiceSelect it to query the subscribed services and cancel them.Phone Service GuideSelect  it to display after-sales information.
Using Phone MenUs25VnetSelect it to directly connect to Vnet service portal.DocumentPictureSelect it to view pictures. Select one picture, and slightly touch 播放添加3. Then, you can use various functions.VideoSelect it to view the stored video files.RingSelect it to view the stored sound files.E-contact CardSelect it to view the stored electronic contact cards.External U-diskYou can use an external lT-Flash memory card to save the photos downloaded or taken by camera, video files, and MP3 files.Search DocSelect it to view the documents saved in the built-in memory, internal U-disk, and external U-disk.  entertainMent
LG MC500  |  User Guide26EntertainmentCameraTake Photos/Record VideoYou can use the built-in camera to take photos or record videos.AlbumSelect it to view and edit photos.SlideSelect it to set effects of the saved photos and set the slide as the main picture.Camera SettingSelect it to set camera sound effect and automatic storage, choose storage mode and initialize camera settings.MP3 MP3 Music BoxSelect it to save and play the downloaded MP3 music.MP3 ListSelect a song from the MP3 music box, and slightly touch 播放添加3. Slightly touch 播放添加3 to select Add to MP3 List MP3 to add it to the MP3 list.MP3 SettingsSkin Setting : This option allows you to select different background pictures.Time Setting : This option allows you to set the play time.
Using Phone MenUs27FM Radio Note: To listen to the radio, insert your earpiece first.Search ChannelAuto Search1   Slightly touch   and select  . Then, select FM Radio2   Select 播放添加3 and Auto Search. Then, select Ye s.Reset All1   Slightly touch   and select  . Then, select FM Radio2   Select 播放添加3 and Reset All. Then, select Yes.Listen to Radio1   Slightly touch   and select  . Then, select FM Radio2   Select the desired channel.Note: You can listen to radio by the built-in speaker. To do so, slightly touch 播放添加3 and select the listening mode. Then, select Earpiece/Speaker.Game You can select new games or mini games to be downloaded.E-book You can view the saved e-books.  entertainMent
LG MC500  |  User Guide28UtilitiesBest Tone Life InfoSelect it to directly access the home page of the life search channel for mobile WAP portal of the Best Tone Service.Map ServiceSelect it to directly access the home page of the surrounding search channel for mobile WAP portal of the Best Tone Service.Book Air TicketsSelect it to directly dial the dedicated number for air-ticket booking of the Best Tone Service, 11843490001.Book HotelSelect it to directly dial the dedicated number for hotel booking of the Best Tone Service, 11843490002.Book RestaurantSelect it to directly dial the dedicated number for restaurant booking of the Best Tone Service, 11843490003.Comm. AssistantSelect it to directly dial the secretary voice service phone number of the Best Tone Service,11843490004.Central Phone ServiceSelect it to set the central phone number of your enterprise, modify it, or dial it.Member SpaceSelect it to directly access the member home page for mobile WAP portal of the Best Tone Service.Dial Best ToneSelect it to directly dial the number of the Best Tone Service, 118114.
Using Phone MenUs29Manager CalendarSelect it. Then, a calendar is displayed.After you modify a date, the calendar will be updated.Also, the square cursor stays on the modified date.If a date is identified by a special cursor, you can infer that a schedule has been made on that day.This function reminds you of your schedule.If you have set a reminder, your phone will play an alert tone.Work ScheduleThis option allows you to record your plan.Memo This option allows you to record and save memo information.1   Slightly touch 播放添加3. Enter a record, and then slightly touch 播放添加3 to save the record.2   Select the entry to be viewed from the memo list, and then slightly touch 播放添加3 to view the entry. Slightly touch 播放添加3 or 播放添加3 to check other saved memo entries.Countdown 1   Slightly touch 播放添加3. Then, slightly touch time to select year, month, and day, and numeric keys to enter digits.  Utilities
LG MC500  |  User Guide30Utilities2   Slightly touch text input area and 播放添加3 to save the time. Private record To view a private memo, you need to enter your password. The default password is 0000.You can add or view credit card information, bank account, etc. and delete all saved information.Search Data You can search for all data entries or single data entry.Alarm In standby mode, slightly touch clock to add an alarm.1   Slightly touch 播放添加3 to add an alarm.2   Slightly touch time and select Off / After 10min 10 / After 20min 20 / After 30min 30 / After 1hr 1 /Set Time.3   If you select Set Time, slightly touch Repeat and select Once / Mon~Fri / Mon~Sat ~ /Every day /Select Time.4   Slightly touch Sleep Time and select Off ) / 3min 3 / 5min 5 / 10min 10 / 15min 15 . 5   Slightly touch Ring Type and select Same as Profile / Ring /Vibrate /Ring+Vibrate. 6   Slightly touch Ring Tone and edit a ring tone. Slightly touch Shutdown Alarm and select Off /On. Slightly touch Memo to enter the memo.
Using Phone MenUs317   Slightly touch 播放添加3 to save the settings. Sound Recording New1   Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to begin recording sound. Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to pause recording. Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to stop recording.2   After recording is stopped, slightly touch 播放添加3 to save the sound. Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to play the sound.Sound Record Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to play the recorded sound and slightly touch 播放添加3 to carry out corresponding operation.Recording Settings Storage Setting : Select phone’s memory or external memory to save the recorded sound.Auto Storage : Select Yes /No to automatically save the recorded sound.Restore Settings : Select Yes /No to restore settings.Drawing BoardSelect it to simply draw a picture.Slightly touch 播放添加3 to carry out corresponding operation.  Utilities
LG MC500  |  User Guide32UtilitiesE-dictionarySearch 1   Enter the first letters of the word to be searched for, and then slightly touch 播放添加3. The lower part of the entry box displays all the words which begin with these letters.2   Select a word and slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to view information. Slightly touch  播放添加3 to view other words similar to the word being searched for.3   To save the word, slightly touch 播放添加3 to add it to the word booklet.Last Searched Word This option allows you to check a list of the words searched for recently.Word Booklet This option allows you to view the saved word booklet, in English or Chinese.My Dictionary This option allows you to view your own English or Chinese dictionary.Review&Test This option allows you to take an English or Chinese test.Color Setting This option allows you to display text topics (main pictures 1~3).
Using Phone MenUs33CalculatorThis option allows you to simply carry out “plus”, “minus”, “multiply”, and “divide” operations and various function operations.ToolsConversion This option allows you to convert currency, length, area, weight, volume, temperature, and speed.World Time This option allows you to browse time of major cities in the world.Stop Watch Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to begin the stop watch. Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to obtain the time.Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to stop counting. Slightly touch ᶹⳟপᯊᓔྟ㒻㓁᪁ᬒذℶ᱖ذᔩ䷇ to continue.Slightly touch 㒻㓁᪁ᬒ㒻㓁᪁ᬒ㒻㓁᪁ᬒ䆄ᔩ䞡䆒 to reset the stop watch. Slightly touch 㒻㓁᪁ᬒ㒻㓁᪁ᬒ㒻㓁᪁ᬒ䆄ᔩ䞡䆒 to record the time.Bookmark This option allows you to save URLs of your favorite web pages so that you can easily visit them later.  Utilities
LG MC500  |  User Guide34SettingsSound/Vibrate Vibrate Mode Select ON /Off. If you select ON, all alert tones are changed into vibration.Incoming Call Alert The alert type for an incoming call can be Ring/ Vibrate/ Frequency Vibration/ Mute/ Ring&Vibrate/ Ring Then Vibrate/ Vibrate Then Ring/ Escalate Ring Tone/ Super Ring Tone&Vibrate.TIP!: The Frequency Vibration option only applicable to the default ring tone accompanied with your phone.Ring This option allows you to set ring tones and volume for incoming calls.Message Alert Tone This option allows you to set the alert tone type and volume of receiving a text message, voice message, multimedia message, and interactive short message.Sound Effects This option allows you to set keypad tone, power-on ring tone, power-off ring tone, and volume.Sharp Time Alert This option allows you to set sharp time alert type, volume, and time.System Alert Tone This option allows you to set battery level alert tone, window popup alert tone, service alert tone, call connected alert tone, 1min alert tone, and WAP alert tone.Vibration Setting This option allows you to set vibration mode and strength.
Using Phone MenUs35Display Background Wallpaper : Slightly touch 播放添加3 to select a wall paper, and then slightly touch 播放添加3 to save it.Clock/Calendar : Slightly touch 播放添加3 to select a clock type.Greetings : Select it to enter the characters displayed on the standby screen. You can also set the display effects of these characters.Network Name Display : Activate it to display the network name on the main screen.Incoming Call Picture : Select it to set the picture displayed for incoming calls.Font This option allows you to set font size and color of the characters displayed.Display Color Display color of your phone can be set to black or white.Menu Style Menus can be displayed in a table or scrolled.Dialed Digit Effects Digits entered on the standby screen can be set, including font size and color.Backlight The duration and brightness of the backlight can be set.Power Saving Mode Select Activate to enter the power saving mode.  settings
LG MC500  |  User Guide36SettingsPhone Settings Protection Settings If you select Activate, touch screen and keys are locked when the backlight is turned off.Security Settings Enter the password before accessing this menu.The default password is 0000. PIN Setting PIN : Select ON or OFF.If you select ON, your phone will prompt you to enter the PIN code. You can use your phone only after you enter a correct PIN code. For the default PIN code, contact your local operator.Lock Phone : Select Lock upon Power-on or Lock Immediately. You can use your phone only after you enter the correct password to unlock it.Lock Functions : This option allows you to prevent others from using each function of your phone.Emergency Number : Even if your phone is locked, you can also dial emergency numbers. Up to two emergency numbers can be set.Change PIN/Password :To change the default password of your phone, enter a new password, slightly touch 播放添加3, enter the new password again, and slightly touch 播放添加3.TIP!: To change PIN code, you must activate PIN code first.Password Prompt : You can set a password prompt so that your phone will give you some tips when you forget your password.Language You can set the language of your phone, affecting the text entry mode.
Using Phone MenUs37Default Text Entry Mode You can set the default text entry mode.Fly Mode If it is activated, you cannot use Bluetooth to receive or make a call or send or receive short messages.Time Format You can select 12-hour format or 24-hour format.Data Service Settings You must enter the password: 0000.Data Rate Setting : You can select High Speed and Low Speed for your phone to access Internet.Vnet Setting :You can set the Vnet server and duration for accessing Vnet.Download Setting : You can set the functions of the download server.Positioning Setting : You can lock positioning and the display on the prompt window.Memory Status You can view utilization of each memory and initialize it.Touch SettingsTouch Settings You can select Touch Type, Touch Ring, Touch Vibration and Volume.Calibrate You can use the touch pen to make fine adjustment.BluetoothBluetooth QDID:B014935 Using Bluetooth, you can directly communicate with compatible mobile equipment, peripherals, and computers without any cables.This mobile phone supports internal Bluetooth connection so that it can be connected to the compatible   settings
LG MC500  |  User Guide38Bluetooth mobile phone and computer’s applications.Enable/Disable Bluetooth This option determines whether to enable or disable Bluetooth.If you select Enable, the Bluetooth icon   is displayed on the upper part of the standby screen.Match Device Slightly touch Add to search for the devices that are matched. Find the desired device, and then slightly touch Match. Enter the password to match with the deviceConnect Devices You can choose to connect to a Bluetooth earpiece or a vehicle-mounted phone.Data Transfer Phone Book : Select it to send phone numbers to another person.Photo : Select it to send photos to another person.MP3 : Select it to send MP3 files to another person.My Info : Select it to edit your own information.TIP!: Your phone can transfer a file up to 6 MB.Bluetooth Settings My Settings : Select it to set your own information and device visibility.Connection Waiting : Select it to set connection waiting.Select MemorySelect it to connect to a data cable for downloading files.Settings
39Specifications and FeaturesBandwidth Send : 824MHz-849MHz     Receive : 869MHz-894MHzAppearance (mm) 106.5 x 55.4 x 11.9 (mm)Temperature range -20°C~+50°CWeight 90g (including battery)Precautions•  Do not lend your phone to others at will.•  Please go to the specified place, such as our service center to enjoy after-sales service.•  Report to your operator at once when losing your phone or having it stolen.•  Use original accessories, because using other antenna, charger, hands-free kit, battery, data cable, and toolkit may degrade phone’s performance and result in faults or personal injuries.•  Thank you for using LANGCHAO LG mobile phone.•  Phone’s functions and appearance may be subject to change without prior notice.Relative humidity 5%~95%Model MC500SpecificationS and featureS
LG MC500  |  User Guide40Product Warranty•  LANGCHAO LG provides the following warranty according to the compensation regulations on damages or injuries of consumers.•  In case of any fault , go to the place where you purchase the phone or an agent nearby. Show your warranty card and require them to repair it. If you cannot go to the Thank you for using LANGCHAO LG mobile phone. Phone’s functions and appearance may be subject to change without prior notice. place where you purchase the phone or an agent, contact our service centerFree ServiceThis limited warranty applies to the faults arising from manufacturer’s errors or natural faults.Damage/Injury TypeCompensationWithin warranty periodWarranty period expiryRequire major repair within 7 days after purchase Replace or refundRequire major repair within 15 days after purchase Replace productFree repair for the faults within one yearFirst and second time for the faults arising from non-man-made factors Free repair Charged repairThird time for the faults arising from non-man-made factorsReplace product or refundCharged repairParts are repaired. Repair is not completed after 30 days.Replace product or refundParts are not repaired. Repair is not completed after 60 days.Replace product or refundNote : The preceding warranty is carried out according to Provisions on the Liability for the Repair, Replacement and Return of Mobile Telephone Products.
41Product Name Mobile phone Model MC500 Product Date Month     Day     Year Manufacturing No.Place of Purchase Warranty PeriodWithin one year since the day of purchasCharged ServiceNot a fault If you require repair in the case of no fault, we will charge you, so please carefully read the User Manual. (If we cannot repair it, we will follow other charging standards.)Request for repair due to unfamiliar operation (such as losing password)Faults due to errors of users Faults due to errors of users or improper handling, for example, broken, soaking, collision, damaged, excessive force.  Faults or damages arising from repair or reconstruction made by others except repair technicians of our company. Faults due to misbehavior or errors of users. Faults or damages arising from using non-original parts or accessories.Other cases Faults due to natural disasters, such as fire, acid and alkaline corrosion, flood, and abnormal power supply. Expiry of service life of consumable accessories, such as battery, charger, antenna, and other auxiliary devices.product Warranty

Navigation menu