LG Electronics USA MG191A Dual-Band GSM Phone User Manual MG191a 0125

LG Electronics USA Dual-Band GSM Phone MG191a 0125

Users Manual

Download: LG Electronics USA MG191A Dual-Band GSM Phone User Manual MG191a 0125
Mirror Download [FCC.gov]LG Electronics USA MG191A Dual-Band GSM Phone User Manual MG191a 0125
Document ID517093
Application IDsiN8j3TaBJvus0NFmZ6Y4w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize88.49kB (1106179 bits)
Date Submitted2005-02-21 00:00:00
Creation Date2005-02-17 14:55:00
Producing SoftwareAcrobat Distiller 6.0 for Macintosh
Document Lastmod2005-02-17 15:04:04
Document TitleMG191a_0125-Ω¬¿ŒøÎ
Document CreatorQuarkXPress¢‚: LaserWriter 8 KH-8.7.1

MG191a
User Guide
Table of Contents
Unpacking
For Your Safety
Your Phone
14
Phone Components
Your Phone’s Features
Display Information
14
15
17
Getting Started
19
Installing the SIM Card
Charging the Battery
Turning Your
Phone On and Off
Access Codes
Barring Password
19
22
General Functions
26
Making a Call
Making a Call by Send Key
Making International Calls
Ending a Call
Making a Call
From the Contact List
26
26
26
26
Adjusting the Volume
Answering a Call
Vibrate Mode (Quick)
Signal Strength
27
27
28
28
Entering Text
28
24
25
25
27
Selecting Functions
and Options
Address Book
In-Call Menu
During a Call
Making a Second Call
Swapping
Between Two Calls
Answering an Incoming Call
Rejecting an Incoming Call
Muting the Microphone
Multiparty or
Conference Calls
Making a Second Call
Setting Up a
Conference Call
Activate the
Conference Call on Hold
Adding Calls to the
Conference Call
Private Call in a
Conference Call
Ending a Conference Call
33
34
35
35
35
35
35
36
36
37
37
37
37
37
38
38
Menu Tree
39
Messaging
42
New Messages
Inbox
42
43
Sent
Drafts
Voice Mail
Listen To Voice Mail
Voice Mailbox Number
44
44
45
45
45
Download Messages
Inbox
Receive
46
Info Service
Receive
Inbox
Topics
Alert
Auto Display
Languages
46
47
47
47
47
47
47
Templates
Templates
Business Card
48
48
48
Settings
Text Message
Download Message
Info Service
49
49
49
49
Memory Status
50
Games
51
46
Settings
52
Sounds
Ring tones
Volume
Ring Alert Type
Message Alert Tones
Key Tones
Power On Tones
52
55
52
52
52
53
53
Display
My Wallpaper
Backlight Timeout
Languages
Contrast
ScreenSaver
53
53
53
54
54
54
Date & Time
Set Date
Date Format
Set Time
Time Format
55
55
55
55
55
Call Settings
Call Forwarding
Answer Mode
Send My Number
Call Waiting
Minute Minder
Automatic Redial
Send DTMF
56
56
57
57
57
57
57
58
46
Security
PIN Code Request
Auto Key Lock
Call Barring Service
Fixed Dial Number (FDN)
Change Codes
58
58
58
59
60
60
Connection
Network Selection
GPRS Attach
61
61
62
Reset Setting
62
Recent Calls
63
Missed Calls
Dialed Calls
Received Calls
Delete Recent Calls
Call Durations
Last Received Call
Last Dialed Calls
Received Calls
Dialed Calls
All Calls
Reset All
63
63
63
64
64
64
64
64
64
64
64
Address Book
65
Contact List
New Contact
Speed Dials
Caller Groups
65
66
66
67
Copy All
Delete All
Settings
Information
68
68
68
69
Fun & Tools
70
My Media
Alarm Clock
Calendar
Calculator
Memo
World Time
Unit Converter
70
71
72
73
73
74
75
Web Access
76
Home
Favorites
Go To URL
Access Point
Cache Settings
Clear Cache
Disallow Cache
77
77
78
78
79
SIM Service
80
79
79
Q&A
Accessories
Safety Guidelines
Glossary
Index
81
84
86
90
103
Unpacking
Check to make sure that you have all the parts shown below.
Standard
Battery
User Guide
Handset
Travel Adapter
Headset
For Your Safety
Important Information
This user guide contains important information on the use and operation of
this phone. Please read all the information carefully for optimal
performance and to prevent any damage to, or misuse of, the phone. Any
changes or modifications not expressly approved in this user guide could
void your warranty for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not expose
your phone to high humidity areas, such as the bathroom, swimming pool,
etc.
Always store your phone away from heat. Never store your phone in
settings that may expose it to temperatures less than 32°F or greater than
104°F, such as outside during a snowstorm or in your car on a hot day.
Exposure to excessive cold or heat will result in malfunction, damage
and/or catastrophic failure.
Be careful when using your phone near other electronic devices. RF
emissions from your mobile phone may affect nearby inadequately
shielded electronic equipment. You should consult with manufacturers of
any personal medical devices such as pacemakers and hearing aides to
determine if they are susceptible to interference from your mobile phone.
Turn off your phone in a medical facility or at a gas station.
Never place your phone in a microwave oven as this will cause the battery
to explode.
IMPORTANT! Please read the TIA SAFETY INFORMATION on page
102 before using your phone.
For Your Safety
Safety Information
Please read and observe the following information for the safe and proper
use of your phone and to prevent any unanticipated damage. Also, keep the
user’s manual in an accessible place at all times after reading it.
] Unplug the power cord and charger during a lightning storm to avoid
electric shock or fire.
] Do not use your phone in high explosive areas as the phone may
generate sparks.
] Do not put your phone in a place subject to excessive dust, and keep the
minimum required distance between the power cord and heat sources.
] Do not damage the power cord by bending, twisting, pulling, or
subjecting it to heat. Do not use the plug if it is loose as it may cause fire
or electric shock.
] Hold the power cord plug firmly to plug and unplug the power cord.
Ensure the plug is firmly connected. If it is not firmly connected, it may
cause excessive heat or fire.
] Do not place a heavy item on the power cord. Do not allow the power
cord to be crimped as it may cause fire or electric shock.
] Be careful not to let the battery contact metal conductors such as a
necklace or coins. When shorted, it may cause an explosion.
] Do not disassemble or impact the battery as it may cause electric shock,
short-circuit, and fire. Store the battery in a place out of reach of
children.
] Using a damaged battery or placing a battery in your mouth may cause
serious injury.
] Charging is displayed on the screen after connecting the travel adapter.
Only if the battery is totally empty, Call indicator Light is on without
displaying “Charging”.
10
For Your Safety
] Do not place items containing magnetic components such as a credit
card, phone card, bank book or a subway ticket, near your phone. The
magnetic strip can be damaged by the phone.
] Do not hold or let the antenna come in contact with your body during a
call.
] Talking on your phone for a long period of time may reduce the call
quality due to heat generated during the use of the phone.
] Do not allow excessive vibration or impact to the phone.
] When you do not plan to use the phone for a long period of time, store it
in a safe area with the power cord unplugged.
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications (FCC) of the United States,
with its action in Report and Order FCC 96-326, adopted an updated safety
standard for human exposure to radio frequency (RF) electromagnetic
energy emitted by FCC regulated transmitters. Those guidelines are
consistent with the safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC guidelines and these
international standards.
11
For Your Safety
CAUTION
Use only the supplied and approved antenna. Use of unauthorized antennas
or modifications could impair call quality, damage the phone, void your
warranty and/or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged antenna
comes into contact with skin, a minor burn may result. Contact your local
dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back of
the phone kept 0.79 inches (2.0cm) between the use's body and the back of
the phone.To comply with FCC RF exposure requirements, a minimum
separation distance of 0.79 inches (2.0cm) must be maintained between the
user’s body and the back of the phone. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not be used.
Body-worn accessories that cannot maintain a 0.79 inch (2.0 cm) separation
distance between the user’s body and the back of the phone, and have not
been tested for typical body-worn operations may not comply with FCC
RF exposure limits and should be avoided.
Vehicle Mounted External Antenna (optional,
if available)
A minimum separation distance of 8 inches (20 cm) must be maintained
between the user/bystander and the vehicle mounted external antenna to
satisfy FCC RF exposure requirements.
For more information about RF exposure, visit the FCC website at
www.fcc.gov
12
For Your Safety
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device and
its accessories may not cause harmful interference, and (2) this device and
its accessories must accept any interference received, including
interference that may cause undesired operation.
Cautions for Battery
] Do not disassemble.
] Do not short-circuit.
] Do not expose to high temperature: 60°C (140°F).
] Do not incinerate.
Battery Disposal
] Please dispose of your battery properly or bring to your local wireless
carrier for recycling.
] Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
] Using the wrong battery charger could damage your phone and void your
warranty.
] The adapter or battery charger is intended for indoor use only.
Do not expose the adapter or battery charger to direct sunlight or use it in
places with high humidity, such as the bathroom.
13
Your Phone
Phone Components
1. Earpiece
6. Active flip
7. Display screen
8. Navigation key
9. Right soft key
2. Left soft key
10. Message key
11. End / Power key
3. Send key
4. Alpha numeric
keys
5. Microphone
14
12. Clear key
Your Phone
Your Phone’s Features
1. Earpiece
2, 9. Left soft key/Right soft key: Each of these keys
perform the functions indicated by the text on the display immediately
above them.
3. Send key: You can dial a phone number and answer incoming calls.
Press this key in standby mode to quickly access the most recent
incoming, outgoing and missed calls.
4. Alphanumeric keys: These keys are used to dial a number in standby
mode and to enter number or characters in edit mode.
5. Microphone: Can be muted during a call for privacy.
6. Active flip: Open the flip to answer an incoming call and close to end
the call.
7. Display screen: Displays phone status icons, menu items, Web
information, pictures and more in full color.
8. Navigation key: Use for quick access to phone functions.
10. Message key: Use to retrieve or send text messages.
11. End/Power key: Allows you to power the phone on or off, end calls, or
return to Standby Mode.
12. Clear key: Allows you to delete the characters entered or return you to
the previous screen.
15
Your Phone
External
display
Ear-microphone
jack
Backlight
A backlight illuminates the display and the keypad. When you press any
key or open the folder, the backlight turns on. It turns off if no key is
pressed within a given period of time, depending on the Backlight menu
option. After one minute, the display turns off to conserve your battery
power. To specify the length of time the backlight is active, set the
Backlight menu option (Menu 8.2.2). See page 86 for further details.
External Display
Your phone has an external display on the cover. It indicates when you
have an incoming call or a message. It also alerts you at the specified time
when you set an alarm by turning on its backlight and showing
corresponding icon on it.
16
Your Phone
Display Information
Icon area
Text and
graphic area
Soft key
indications
Area
Description
First line
Displays various icons. See page 18
Middle lines
Display messages, instructions and Any information that
you enter, such As number to be dialed.
Last line
Shows the functions currently Assigned to the two soft
keys.
17
Your Phone
On-Screen Icons
The table below describes various display indicators or icons that appear
on the phone’s display screen.
Icon
Description
Indicates the strength of the network signal.
Indicates a call is in progress.
Indicates that you are roaming off the network.
Indicates that GPRS service is available.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates call forwarding option has been selected.
Indicates the receipt of a text message.
Indicates the receipt of a MMS message.
Indicates the receipt of a voice mail.
Indicates that the vibration ringer has been set.
Indicates the Silent profile is activated.
Indicates the Headset profile is activated.
Indicates the Car profile is activated.
Indicates the General profile is activated.
Indicates that you can use the download message service.
Indicates the Schedule function.
18
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are provided with a plug-in
SIM card loaded with your subscription details, such as your PIN, any
optional services available and many others.
n Important! The plug-in SIM card and its contacts can be easily damaged by
scratches or bending, so be careful when handling, inserting or
removing the card. Keep all SIM cards out of the reach of small
children.
1. If necessary, switch off the phone by holding down the
the power-off image displays.
key until
2. Remove the battery. To do so:
19
Getting Started
3. Slide the SIM card into the SIM card socket so that it locks the card into
place. Make sure that the notched corner is bottom left and the gold
contacts of the card face into the phone.
n Note When you need to remove the SIM card, slide it, as shown, and take it out
of the socket.
20
Getting Started
4. Position the lugs on the down of the battery into the retaining holder.
Then push the bottom of the battery into position until it clicks.
5. Attach back cover by sliding up into position until it clicks.
21
Getting Started
Charging the Battery
Use of unauthorized accessories could damage your phone and invalidate
your warranty.
To use the travel adapter provided with your phone:
1. With the battery in position on the phone, connect the lead from the
travel adapter to the bottom of the phone. Check that the arrow on the
lead connector is facing towards the front of the phone.
2. Connect the adapter to a standard AC wall outlet. Only use the travel
adapter that comes included with the package.
n Warning You must unplug the adapter before we remove the battery from the
phone during charging; otherwise, the phone could be damaged.
3. When charging is finished, disconnect the adapter from the power outlet
and from the phone by pressing on the gray tabs on both sides of the
connector while pulling the connector out.
22
Getting Started
n Notice
] If your phone is powered on while charging, you’ll see the bars in the
battery indicator icon cycle.
When the battery is fully charged, the bars in the battery indicator icon will
flash on and off.
] If your phone is powered off, the display will show the charging status.
‘Charging’ or ‘Full’ will be displayed.
If the battery fails to charge completely:
] After turning the phone on and off, please attempt to recharge the battery.
] After detaching and reattaching the battery, please attempt to recharge the
battery.
23
Getting Started
Turning Your Phone On and Off
1. Open the flip.
2. Hold down the
key until the phone switches on.
3. If the phone asks for a PIN, enter the PIN and press the left soft key
[OK]. For further details, see page 93.
The phone searches for your network and after finding it, the idle screen,
illustrated below, appears on both displays. Now, you can make or receive
a call.
n Note The display language is preset to English at the factory. To change the
language, use the Languages menu option (Menu 8.2.3).
For further details, see page 87.
4. When you wish to switch the phone off, hold down the
power-off image displays.
24
key until the
Getting Started
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be changed by using
the Change Codes feature (Menu 8.5.4).
Security code (4 to 8 digits)
The security code protects the unauthorized use of your phone. The default
security code is set to ‘0000’ and the security code is required to delete all
phone entries and to activate the Restore Factory Settings menu. The
security code default setting can be modified from the Security Settings
menu.
Barring Password
The barring password is required when you use the Call Barring function.
The password is obtained from the service provider when you subscribe to
this function. See page 93 for further details.
25
General Functions
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the area code. To edit a number on the
display screen, press the right/left navigation keys to move the cursor to
desired position or simply press the
key to erase one digit at a
time.
] Press and hold the
3. Press the
key to erase the entire number.
key to call the number.
4. When finished, press the
key.
Making a Call by Send Key
1. Press the
key, and the most recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press the
key.
Making International Calls
1. Press and hold the
key for the international prefix.
The ‘+’ character can be replaced with the international access code.
2. Enter the country code, area code, and the phone number.
3. Press the
key.
Ending a Call
When you have finished a call, press the
26
key.
General Functions
Making a Call From the Contact List
You can store names and phone numbers dialed frequently in the SIM card
as well as the phone memory known as the Contact List.
You can dial a number by simply looking up a name in the contact list. For
more details on the Contact List feature, please refer to page 79.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the side keys
of the phone.
In idle mode with the flip cover open, you can adjust the ring volume using
the side keys.
Answering a Call
When you receive a call, the phone rings and the flashing phone icon
appears on the screen. If the caller can be identified, the caller’s phone
number(or name if stored in your Address Book) is displayed.
1. Open the flip and press the
key or the left soft key to answer an
incoming call. If the Any Key menu option(Menu 9.4.2) has been set to
, any key press will answer a call except for the
key or the
right soft key.
n Notice
] To reject an incoming call, press and hold the side keys on the left side of
the phone without opening the flip.
] If the Flip Open menu option(Menu 9.4.2) is set to
, you do not need
to press any key. You can answer the call simply by opening the flip.
2. End the call by closing the phone or pressing the
key.
n Notice You can answer a call while using the Address Book or other menu
features.
27
General Functions
Vibrate Mode (Quick)
When the flip is closed, Vibrate Mode can be activated by pressing and
holding down side keys. When the flip is opened, Vibrate Mode can be
activated by pressing and holding down
key.
Signal Strength
If you are inside a building, being near a window may give you better
reception. You can see the strength of your signal by the signal indicator
) on your phone’s display screen.
Entering Text
You can enter alphanumeric characters by using the phone’s keypad. For
example, storing names in the Address Book, writing a message, creating
scheduling events in the calendar all require entering text.
The following text input methods are available in the phone.
T9 Mode
This mode allows you to enter words with only one keystroke per letter.
Each key on the keypad has more than one letter. The T9 mode
automatically compares your keystrokes with an internal linguistic
dictionary to determine the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by pressing the key labeled with the
required letter once, twice, three or four times until the letter is displayed.
123 Mode(Numbers Mode)
Type numbers using one keystroke per number. To change to 123 mode in
a text entry field, press
key until 123 mode is displayed.
28
General Functions
Symbolic Mode
This mode allows you to enter special characters.
n Notice You can select a different T9 language from the menu option. The
default setting on the phone is T9 disabled mode.
Changing the Text Input Mode
1. When you are in a field that allows characters to be entered, you will
notice the text input mode indicator in the upper right corner of the
display.
2. If you want to change modes, press and hold down the
available modes are displayed.
key. The
Using the T9 Mode
The T9 predictive text input mode allows you to enter words easily with a
minimum number of key presses. As you press each key, the phone begins
to display the characters that it thinks you are typing based on a built-in
dictionary. As new letters are added, the word changes to reflect the most
likely candidate from the dictionary.
1. When you are in the T9 predictive text input mode, start entering a word
by pressing keys
to
Press one key per letter.
] The word changes as letters are typed - ignore what’s on the screen
until the word is typed completely.
] If the word is still incorrect after typing completely, press the down
navigation key once or more to cycle through the other word options.
Example: Press
Press
to type Home
[down navigation key] to type Inme
] If the desired word is missing from the word choices list, add it by
using the ABC mode.
29
General Functions
2. Enter the whole word before editing or deleting any keystrokes.
3. Complete each word with a space by pressing the
key.
To delete letters, press
words.
to erase entire
. Press and hold down
n Notice To exit the text input mode without saving your input,
press
. The phone returns to the previous menu level.
Using the ABC Mode
Use the
to
keys to enter your text.
1. Press the key labeled with the required letter:
] Once for the first letter
] Twice for the second letter
] And so on
2. To insert a space, press the
key once. To delete letters, press the
key. Press and hold down the
key to clear the display.
30
General Functions
n Notice Refer to the table below for more information on the characters
available using the keys.
Key
Characters in the Order Display
Upper Case
Lower Case
.,-¿?¡!@1
.,-¿?¡!@1
ABCÁÃÇ2
abcáãç2
DEFÉ3
defé3
GHIÍ4
ghií4
JKL5
jkl5
MNOÓÑ6
mnoóñ6
PQRS7
pqrs7
TUVÚÜ8
tuvúü8
WXYZ9
wxyz9
Space Key
Space Key
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text message
(a telephone number, for example).
Press the keys corresponding to the required digits before manually
switching back to the appropriate text entry mode.
31
General Functions
Using the Symbol Mode
The Symbol Mode enables you to enter various symbols or special
characters.
To enter a symbol, press the
key. Use the navigation keys to select
the desired symbol and press the [OK] key.
32
Selecting Functions and Options
Your phone offers a set of functions that allow you to customize the phone.
These functions are arranged in menus and sub-menus, accessed via the
two soft keys marked
and
. Each menu and sub-menu allows you
to view and alter the settings of a particular function.
The roles of the soft keys vary according to the current context; the label
on the bottom line of the display just above each key indicates its current
role.
Press the left soft key to
access the available
Menu.
Press the right soft key
to access the available
Names.
33
Address Book
You can store phone numbers and their corresponding names in the
memory of your SIM card.
In addition, you can store up to 255 numbers and names in the phone
memory.
The SIM card and phone memory, although physically separate, are
utilized like a single entity known as the Contact List. (See page 79 for
details)
34
In-Call Menu
Your phone provides a number of control functions that you can use during
a call. To access these functions during a call, press the left soft key
[Options].
During a Call
The menu displayed on the handset screen during a call is different than
the default main menu displayed when in idle screen, and the options are
described below.
Making a Second Call
You can get a number you wish to dial from the Address Book to make a
second call. Press the left soft key then select Contact List.
Swapping Between Two Calls
To switch between two calls, press the left soft key or
select Swap.
key, and then
Answering an Incoming Call
To answer an incoming call when the handset is ringing, simply press the
key. The handset is also able to warn you of an incoming call while
you are already on a call. A tone sounds in the earpiece, and the display
will show that a second call is waiting. This feature, known as Call
Waiting, is only available if your network supports it. For details of how
to activate and deactivate it see Call Waiting (Menu 8.4.4).
If Call Waiting is on, you can put the first call on hold and answer the
second, by pressing
. You can end the current call and answer the
waiting call by pressing the left soft key and then selecting Active call
menu of End call.
35
In-Call Menu
Rejecting an Incoming Call
You can reject an incoming call without answering by simply pressing
the
key.
During a call, you can reject an incoming call by pressing the left soft key,
which is the [Menu] key and selecting the Reject call or by pressing
the
key.
Muting the Microphone
You can mute the microphone during a call by pressing the [Menu] key
then selecting Mute or right soft key [Mute]. The handset can be unmuted
by pressing the Unmute menu or right soft key [Unmute]. When the
handset is muted, the caller cannot hear you, but you can still hear them.
Multiparty or Conference Calls
The multiparty or conference service provides you with the ability to have
a simultaneous conversation with more than one caller, if your network
service provider supports this feature. A multiparty call can only be set up
when you have one active call and one call on hold, both calls having been
answered. Once a multiparty call is set up, calls may be added,
disconnected or separated (that is, removed from the multiparty call but
still connected to you) by the person who set up the multiparty call. These
options are all available from the In-Call menu. The maximum callers in a
multiparty call are five. Once started, you are in control of the multiparty
call, and only you can add calls to the multiparty call.
Making a Second Call
You can make a second call while currently on a call. Enter the second
number and press the
. When the second call is connected, the first
call is automatically placed on hold. You can swap between calls, by
pressing the
key.
36
In-Call Menu
Setting Up a Conference Call
To set up a conference call, place one call on hold and while the active call
is on, press the left soft key and then select the Join menu of Conference
call.
Activate the Conference Call on Hold
To activate a conference call on hold, press the left soft key, and then press
the
key.
Adding Calls to the Conference Call
To add a call to an existing conference call, press the left soft key, and then
select the Join menu of Conference call.
37
In-Call Menu
Private Call in a Conference Call
To have a private call with one caller from a conference call, display the
number of the caller you wish to talk to on the screen, then press the left
soft key. Select the Private menu of Conference call to put all the other
callers on hold.
Ending a Conference Call
Currently displayed caller from a conference call can be disconnected by
pressing the
key.
38
Menu Tree
The following illustration shows the available menu structure and indicates
the:
] Number assigned to each menu option.
] Page where you can find the feature description.
1. Messaging (see page 42)
2. Games (see page 51)
1.1 New Messages
1.2 Inbox
1.3 Sent
1.4 Drafts
* 1.5 Voice Mail
3. Settings (see page 52)
3.1 Sounds
3.1.1 Ring tones
3.1.2 Volume
1.5.1 Listen To Voice Mail
3.1.3 Ring Alert Type
1.5.2 Voice Mailbox Number
3.1.4 Message Alert Tones
1.6 Download Messages
1.6.1 Inbox
1.6.2 Receive
*1.7 Info Service
1.7.1 Receive
3.1.5 Key Tones
3.1.6 Power On Tones
3.2 Display
3.2.1 My Wallpaper
3.2.2 Backlight Timeout
1.7.2 Inbox
*3.2.3 Languages
1.7.3 Topics
3.2.4 Contrast
1.7.4 Alert
1.7.5 Auto Display
1.7.6 Languages
1.8 Templates
3.2.5 ScreenSaver
3.3 Date & Time
3.3.1 Set Date
3.3.2 Date Format
1.8.1 Templates
3.3.3 Set Time
1.8.2 Business Card
3.3.4 Time Format
1.9 Settings
1.9.1 Text Message
1.9.2 Download Message
1.9.3 Info Service
1.10 Memory Status
*: Shown only if supported by CPHS(Common PCS Handset Specification)
39
Menu Tree
3. Settings (continued)
3.4 Call Settings
* 3.4.1 Call Forwarding
3.4.2 Answer Mode
5. Address Book (see page 65)
5.1 Contact List
5.2 New Contact
5.3 Speed Dial List
* 3.4.3 Send My Number
5.4 Caller Groups
* 3.4.4 Call Waiting
5.5 Copy All
3.4.5 Minute Minder
5.7 Settings
3.4.6 Automatic Redial
5.8 Information
3.4.7 Send DTMF
3.5 Security
3.5.1 PIN Code Request
3.5.2 Auto Key Lock
* 3.5.3 Call Barring Service
6. Fun & Tools (see page 70)
6.1 My Media
6.1.1 Sounds
6.1.2 Graphics
3.5.4 Fixed Dial Number
6.2 Alarm Clock
3.5.5 Change Codes
6.3 Calendar
3.6 Connection
* 3.6.1 Network Selection
3.6.2 GPRS Attach
3.7 Reset Setting
6.4 Calculator
6.5 Memo
6.6 World Clock
6.7 Unit Converter
4. Recent Calls (see page 63)
4.1 Missed Calls
4.2 Dialed Calls
4.3 Received Calls
4.4 Delete Recent Calls
4.5 Call Durations
4.5.1 Last Received Call
4.5.2 Last Dialed Calls
4.5.3 Received Calls
4.5.4 Dialed Calls
4.5.5 All Calls
4.5.6 Reset All
40
*: Shown only if supported by CPHS(Common PCS Handset Specification)
Menu Tree
7. Web Access (see page 76)
7.1 Home
7.2 Favorites
7.3 Go To URL
7.4 Access Point
7.5 Cache Settings
7.5.1 Clear Cache
7.5.2 Disallow Cache
7.6 Information
4. SIM Service (see page 80)
41
Messaging
Your phone receives voice mail notification messages and Short Message
Service (SMS) messages.
Voice mail and SMS are network services. Please contact your service
provider for more information.
When the
icon appears, you have received a new voice mail. When
the
icon appears, you have received a new text message. If the
message memory is full, an error message is displayed, the
icon
flashes and you cannot receive any new messages. Use the Delete option in
the Inbox (Menu 1.1.2) to delete obsolete messages. Once there is space in
the memory any undelivered SMS messages will be received (provided
sufficient space is available).
New Messages
Menu 1.1
You can write and edit text messages of up to 918 characters.
1. Type in a message using key presses. For details on how to enter text,
refer to page 28 (Entering Text).
2. After completing the message select the required option by pressing the
left soft key [Options].
The following options are available.
] Send To Number: Enter the phone number or select the number from
the address book.
* ] Send To Email: Enter the email or select the email from the address
book.
] Save To Drafts: Save the message so that it can be sent later.
] Edit Subject: Set on and off for the T9 input mode.
] T9 Languages: Choose between English, Spanish or French T9
language. For details on how to enter text, refer to page 29 (Using the T9
Mode).
] Clear All: Deletes the written message.
42
*: Shown only if supported by SIM card
Messaging
] Exit: Exit the text editor.
The following options are available. (Press the right soft key [Insert])
] Symbol: Attach special characters.
] Text Templates: Use the text templates already set in the phone.
] Address Book: Attach a phone number.
] Business Card: Attach your name card.
Inbox
Menu 1.2
Received text messages, page messages, and email lists may be searched
and the contents may be viewed. Received messages are displayed from
newest to oldest.
The following options are available.
] View: You can receive the received messages.
] Delete: Deletes the selected message from the Inbox.
] Reply: Replies to the received message.
] Forward: Forwards a received message to other recipients. After
recipients are entered, the message can be forwarded.
] Return Call: Call back the sender.
] Delete Read Messages: Deletes all the read messages in the list.
] Delete All: Deletes all the received messages.
43
Messaging
Sent
Menu 1.3
View lists and contents of sent messages in this menu and also verify if
transmission was successful.
The following options are available.
] Delete: Deletes the selected message from the Outbox.
] Forward: Forwards the current message to other recipients.
Drafts
Menu 1.4
This menu option shows the preset message list. Scroll through the list
using the up/down navigation keys.
The following options are available.
] View: You can view the selected message.
] Delete: Deletes the selected preset message.
] Edit: You can edit a selected message.
] Delete All: Deletes all the preset messages.
44
Messaging
* Voice Mail
Menu 1.5
This menu provides you with a quick way of accessing your voice mailbox
(if provided by your network).
Before using this feature, you must enter the voice server number obtained
from your service provider.
When new voicemail is received, the symbol will be displayed on the
screen. Please check with your network service provider for details of their
service in order to configure the handset accordingly.
Listen To Voice Mail (Menu 1.5.1)
Before using this feature, you must enter the voice server number obtained
from your service provider (see menu option 2.3.2). You can then select
this option and press the left soft key [OK] to listen to your messages.
You can quickly connect to the first voice server by pressing and holding
the
key in Idle Mode.
Voice Mailbox Number (Menu 1.5.2)
Allows you to change the voice mail server number, if necessary.
n Note Voice Mail is a network feature. Please contact your service provider for
further details.
*: Shown only if supported by SIM card
45
Messaging
Download Messages
Menu 1.6
Inbox (Menu 1.6.1)
You can order push messages from WAP service providers.
Push messages are notifications of, for example, news headlines and they
may contain a text message or address of a WAP service. For availability
and subscription, contact your WAP service provider.
Service providers can update an existing push message every time a new
push message is received. Messages can be updated even if you have
moved them to another folder. Push messages expire and they are deleted
automatically.
] Information: Shows the information of received push messages.
] Load: Allows you to connect to a specific site using the information in
the received push message.
] Delete: Delete the selected push message.
Receive (Menu 1.6.2)
You can set the option whether you will receive the message or not.
* Info Service
Menu 1.7
Info service messages are text messages sent by the network to GSM
phone users. They provide general information such as weather reports,
traffic news, taxis, pharmacies, and stock prices. Each type of information
is associated with a number, which can be obtained from the service
provider. When you receive an info service message, a popup message will
indicate a new message receipt or the info service message will be
displayed directly. In standby mode, the following options are available
when viewing the info service message.
46
*: Shown only if supported by SIM card
Messaging
Receive (Menu 1.7.1)
Ability to enable or disable the reception of broadcast messages.
Inbox (Menu 1.7.2)
The list of received broadcast messages can be searched and the contents
viewed.
Topics (Menu 1.7.3)
To create new topics, press the left soft key [Select] and then select the
new topics menu by pressing the left soft key [Options].
You can Deactivate, Edit, Delete and Add New topics by pressing the left
soft key [Select].
Alert (Menu 1.7.4)
Ability to select the alert type for a new message.
Auto Display (Menu 1.7.5)
This option will automatically display all broadcast messages received.
Scroll through the messages using the up/down navigation keys.
Languages (Menu 1.7.6)
This option allows you to select the language preferred. The cell
broadcast message will be displayed in the language selected.
If you use all languages supported by phone, select ‘Automatic’ at the
bottom of the list.
47
Messaging
Templates
Menu 1.8
There are 9 predefined messages in the list. You can view and edit the
template messages or create new messages. Two options are available:
Text and Multimedia.
Templates (Menu 1.8.1)
• Where are you?
• Hi, how are you?
• Talk to me it's urgent
• Call me urgently
• Call me as soon as you can
• I will be later
• I got your message, I will call you later
• What are you doing?
• Thank you
The following options are available.
] View: Allows you to view the selected template message
] Delete: Allows you to delete the selected template message.
] Add New: Allows you to add a new template message your own one.
] Send to Message: Sends the selected template message by SMS.
] Edit: Allows you to write a new message or edit the selected template
message.
] Delete All: Allows you to delete all the template messages.
Business Card (Menu 1.8.2)
This option allows you to make your own name card. Key in the Name,
Mobile number, Office number, Fax number and E-mail address.
] Edit: Allows you to write a new message or edit the selected name card.
] Send Via Text Message: Sends the selected name card by SMS.
] Send Via Multimedia Message: Sends the selected name card by MMS.
] Delete: Allows you to delete the selected name card.
48
Messaging
Settings
Menu 1.9
This menu allows you to set up default SMS information.
Text messages (Menu 1.9.1)
] Message Center Number: Allows you to store or change the number of
your email gateway required when sending text messages. You must
obtain this number from your service provider.
] Message Subject: If you set it to on, allows you to enter the subject.
] Message Types: Allows you to set the default message type (Text,
Voice, Fax, Paging, X.400, E-mail, ERMES). The network can convert
the messages into the selected format. The type of message you desire
can be set to Text Type.
] Valid Period: Allows you to set the length of time for which your text
messages will be stored at the SMS center while attempts are made to
deliver them to the recipient. Possible values are Maximum, 30 Minutes,
1 Hour, 6 Hours, 1 Day and 1 Week which can be authorized by your
service provider.
] Delivery Reports: Allows you to activate or deactivate the report
function. When this function is activated, the network informs you
whether or not your message has been delivered.
] Reply Via Same Service Center: Allows the recipient of your SMS
message to send you a reply via your message center, if the service is
provided by the network.
49
Messaging
Download Message (Menu 1.9.2)
Info Service (Menu 1.9.3)
Memory Status
Menu 1.10
You can check the current memory status of each memory for SMS and
MMS.
50
Games
Your phone has 10 default games. When you select this game, the
following options are available.
n Note The control keys are different depending on the game. Each game
includes an introduction on the main control keys.
The common keys are listed below. [Common Key Function]
] Right Soft Keys : Back to the Game list menu.
] Any Keys: start the Game.
: Pause or resume a game.
] New Game: Allows you to start a game.
] High Score: Enables you to view the highest score recorded for the
selected game.
] Key Info: Describes the buttons used by the game.
] Continue: Allows you to continue playing the game.
51
Settings
Sounds
Menu 3.1
You can use the Sound Settings feature to customize various settings, such
as the:
] Ring melody, volume and type
] Sounds made when you press a key, make an error or receive a message
This menu option connects to Telcel’s ring tone download site.
Ring tones (Menu 3.1.1)
This option allows you to select the required ring melody. You can choose
between many different melodies. If you have downloaded any sounds
from the Internet or received any ring tone messages, you can view the list
in this menu.
Volume (Menu 3.1.2)
] Ring tone: To set the volume level for the ringing tones.
] Key Tone: To set the volume level for keypad tones.
] Call: This can adjust the volume level.
] Headset: When using the Headset, volume level can be adjusted.
Ring Alert Type (Menu 3.1.3)
You can select an option from Ring, Ring and Vibrate and Vibrate then
Ring.
Message Alert Tones (Menu 3.1.4)
Select the alert tone for messages.
52
Settings
Key Tones (Menu 3.1.5)
This menu option allows you to select a tone that the phone sounds when
you press a key. You can select an option from Beep and Voice.
Power on Tones (Menu 3.1.6)
For further details, see page 74 (Menu 6.3).
Display
Menu 3.2
You can change the background image and the display style for Menu
Mode according to your preference.
Wallpaper (Menu 3.2.1)
This option allows you to change the background image (wallpaper) to be
displayed in idle mode.
To change the background image, proceed as follows.
1. Scroll through the list by pressing the left or right navigation key.
You have various preset images available. You can also select the blank
background and any images downloaded from the Internet.
2. Press the left soft key [Select] when the required image is highlighted.
The selected image is displayed.
Backlight Timeout (Menu 3.2.2)
You can select whether or not the phone uses the backlight. A marginal
increase in the standby/talk time can be achieved by turning the backlight
off.
• 10 Seconds turns the backlight off 10 seconds after the last key was
pressed.
53
Settings
• 20 Seconds turns the backlight off 20 seconds after the last key was
pressed.
• 30 Seconds turns the backlight off 30 seconds after the last key was
pressed.
* Languages (Menu 3.2.3)
You can select the display language. When the language option is set to
Automatic, the language is automatically selected according to the
language of the SIM card used. English will be set if the language on the
SIM card is not supported in the phone.
Contrast (Menu 3.2.4)
This option allows you to adjust the brightness level of the display screen.
You can adjust by using the right/left and up/down navigation key.
ScreenSaver (Menu 3.2.5)
Allows you to set a screen saver when the phone is in standby mode and
none of the phone’s functions have been used for a certain length of time.
n Note Note To deactivate the screensaver, press any key.
54
*: Shown only if supported by SIM card
Settings
Date & Time
Menu 3.3
Set Date (Menu 3.3.1)
Allows you to enter the day, month and year. You can change the date
format via the Date Format menu option.
Format: Allows you to change the time and date formats.
Date Format (Menu 3.3.2)
YYYY/MM/DD(year/month/day)
DD/MM/YYYY(day/month/year)
MM/DD/YYYY(month/day/year)
Set Time (Menu 3.3.3)
Allows you to enter the current time. You can choose the time format via
the Time Format menu option.
Time Format (Menu 3.3.4)
24 Hours/12 Hours
55
Settings
Call Settings
Menu 3.4
To change the settings for call diverting:
* Call Forwarding (Menu 3.4.1)
When this network service is activated, you can direct your incoming calls
to another number, for example, to your voice mailbox number. For
details, contact your service provider. Select one of the divert options, for
example, select If busy to divert voice calls when your number is busy or
when you reject incoming calls.
The following options are available:
] All Voice Calls: Diverts voice calls unconditionally.
] If Busy: Diverts voice calls when the phone is in use.
] If No Reply: Diverts voice calls which you do not answer.
] If Out Of Reach: Diverts voice calls when the phone is switched off or
out of coverage.
] All Data Calls: Diverts to a number with a PC connection
unconditionally.
] All Fax Calls: Diverts to a number with a fax connection
unconditionally.
• Activate: Activates the corresponding service.
- To Other Number: Inputs the number for diverting.
- Favorite Number: You can check recent five diverted numbers.
• Cancel: Cancels the corresponding service.
• View Status: Checks the status of the service.
] Cancel All: Cancels all call divert service.
56
*: Shown only if supported by SIM card
Settings
Answer Mode (Menu 3.4.2)
Allows you to determine when to answer the phone.
] Any Key: You can answer an incoming call by pressing any key, except
the
key.
] Send Key Only: You can answer an incoming call by only pressing
the
key.
* Send My Number (Menu 3.4.3)
This network service allows you to set your phone number to be displayed
(On) or hidden (Off) from the person to whom you are calling. Select Set
By Network to reset the phone to the setting that you have agreed upon
with your service provider.
* Call Waiting (Menu 3.4.4)
The network will notify you of a new incoming call while you have a call
in progress. Select Activate to request the network to activate call waiting,
Cancel to request the network to deactivate call waiting, or View Status,
to check if the function is active or not.
Minute Minder (Menu 3.4.5)
This option allows you to specify whether the phone must beep every
minute during an outgoing call to keep you informed of the length of the
call.
Automatic Redial (Menu 3.4.6)
Select On, and your phone will make a maximum of three attempts to
connect the call after an unsuccessful call attempt.
*: Shown only if supported by SIM card
57
Settings
Send DTMF (Menu 3.4.7)
You can send the DTMF (dual tone multi-frequency) tones of the number
on the display during a call.
This option is helpful for entering a password or account number when you
call an automated system, like a banking service.
Security
Menu 3.5
Various codes and passwords are used to protect the features of your
phone. They are described in the following sections (see pages 25)
PIN Code Request (Menu 3.5.1)
When the PIN code request feature is enabled, you must enter your PIN
each time you switch the phone on. Consequently, any person who does
not have your PIN cannot use your phone without your approval.
n Note Before disabling the PIN code request feature, you must enter your PIN
The following options are available:
] Enable: You must enter the PIN each time the phone is switched on.
] Disable: The phone connects directly to the network when you switch it
on.
Auto Key Lock (Menu 3.5.2)
When you enable Automatic key lock, keypad will be lock automatically
on an idle screen after selected seconds without any key requesting. if you
set to Off, keypad will not be locked automatically.
n Note Note If you want to unlock your phone keypad, press the left soft key
[unlock] key and then press right key. But if you enabled Automatic key
lock before, your phone keypad will be unlock and then after selected
seconds the keypad will be lock up again automatically.
58
Settings
* Call Barring Service (Menu 3.5.3)
Call barring allows you to restrict from making and receiving calls with
your phone. For this function, you need the barring password, which you
can obtain from your service provider.
The following options are available:
] All Outgoing: Calls cannot be made.
] Outgoing International: International calls cannot be made.
] Outgoing International Except Home Country: When abroad, calls
can be made only to numbers within the current country and to your
home country, which is where your home network provider is located.
] All Incoming: Calls cannot be received.
] Incoming When Abroad: Calls cannot be received when you are using
your phone outside your home service area.
] Cancel All Barrings: All call barring settings are deactivated; calls can
be made and received normally.
] Change Password: You can set and change the call barring password
obtained from your service provider using this option. You must enter the
current password before you can specify a new one. Once you have
entered a new password, you are asked to confirm it by entering it again.
n Note To use Call Barring service, you must input the network password. When
calls are barred, calls may be possible to certain emergency numbers in
some networks.
*: Shown only if supported by SIM card
59
Settings
Fixed Dial Number (FDN) (Menu 3.5.4)
Allows you to restrict your outgoing calls to selected phone numbers, if
this function is supported by your SIM card. The PIN2 code is required.
The following options are available:
] Enable: You can only call phone numbers stored in the Address Book.
You must enter your PIN2.
] Disable: You can call any number.
] Number List: You can view the number list saved as fixed dial number.
n Note Not all SIM cards have a PIN2. If your SIM card does not, this menu
option is not displayed.
Change Codes (Menu 3.5.5)
The Change codes feature allows you to change your current password to a
new one. You must enter the current password before you can specify a
new one.
You can change the access codes: Security Code, PIN1 Code, PIN2 Code
n Note PIN: Personal Identification Number.
60
Settings
* Connection
Menu 3.6
Network Selection (Menu 3.6.1)
The Network Selection feature allows you to indicate how the network you
will use is selected when roaming outside your home area.
Options are: Automatic, Manual, and Preferred.
n Note You can select a network other than your home network only if it has a
valid roaming agreement with your home network.
] Automatic: Allows you to set the phone to automatically search for and
select one of the cellular networks available in your area.
The phone will be set to Automatic even though the power is off and on.
] Manual: Allows you to select the desired network manually from a list
of networks. If the connection to the manually selected network is lost,
the phone will sound an error tone and ask you to select a network again.
The selected network must have a roaming agreement with your home
network, that is, the operator whose SIM card is in your phone. The
phone lets you select another network if the phone fails to access the
selected network. If you switch off the phone, the phone will be reset to
Automatic.
] Preferred: You can set a list of preferred networks the handset should
attempt to register with first, before attempting to register to any other
networks. This list is created from the handset’s predefined list of known
networks.
*: Shown only if supported by SIM card
61
Settings
GPRS Attach (Menu 3.6.2)
If you select Power On and you are in a network that supports packet data,
the phone registers to the GPRS network and sending short messages will
be done via GPRS. Also, starting an active packet data connection, for
example, to send and receive e-mail, is quicker. If you select When
Needed, the phone will use a packet data connection only if you start an
application or action that needs it. The GPRS connection is closed after it
is not used by any application.
n Note If there is no GPRS coverage and you have chosen Power on, the phone
will periodically try to establish a packet data connection.
Reset Setting
Menu 3.7
You can easily reset your phone to its default configuration. To do so,
proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
n Note The password is preset to 0000.
62
Recent Calls
You can check the record of missed, received, and dialed calls only if the
network supports the Calling Line Identification (CLI) within the service
area.
The number and name (if available) are displayed together with the date
and time at which the call was made. You can also view call times.
Missed Calls
Menu 4.1
This option lets you view the last 10 unanswered calls. You can also:
• View the number if available and call it, or save it in the Address Book
• Enter a new name for the number and save both in the Address Book
• Send a message by this number
• Delete the call from the list
Dialed Calls
Menu 4.2
This option lets you view the last 20 outgoing calls(called or attempted).
You can also:
• View the number if available and call it or save it in the Address Book
• Enter new name for the number and save both in the Address Book
• Send a message by this number
• Delete the call from the list
Received Calls
Menu 4.3
This option lets you view the last 20 incoming calls. You can also:
• View the number if available and call it, or save it in the Address Book
• Enter a new name for the number and save both in the Address Book
• Send a message by this number
• Delete the call from the list
63
Recent Calls
Delete Recent Calls
Menu 4.4
Allows you to delete Missed, Received and Dialed call lists. You can
delete all call lists at one time.
Call Durations
Menu 4.5
Allows you to view the duration of your incoming and outgoing calls. You
can also reset the call times. The following timers are available:
Last Received Call (Menu 4.5.1)
Length of the last received call.
Last Dialed Call (Menu 4.5.2)
Length of the last dialed call.
Received Calls (Menu 4.5.3)
Length of the incoming calls.
Dialed Calls (Menu 4.5.4)
Length of the outgoing calls.
All Calls (Menu 4.5.5)
Total length of all calls made and incoming calls since the timer was last
reset.
Reset All (Menu 4.5.6)
Allows you to reset all the call durations.
n Notice The actual time invoiced for calls by your service provider may vary,
depending upon network features, rounding-off for billing, and so forth.
64
Address Book
You can store phone numbers and their corresponding names in the
memory of your SIM card. In addition, you can store up to 255 numbers
and names in the phone memory. The SIM card and phone memories,
although physically separate, are used as if they were a single entity, called
the Address Book.
Contact List
Menu 5.1
1. When the idle screen is displayed, press the right soft key [Names].
2. Press the left soft key [Select].
n Note You can also scroll through the Address Book from the beginning, in idle
mode with the flip cover open, by pressing the down navigation key
directly.
3. If you want to edit, delete, copy an entry, or to add the voice to one,
select [Options].
4. Once you have found the required entry, press the
to dial the number.
• View Detail: To view in detail the selected name.
• Delete: You can delete an entry.
• Write Message: You can write a text message. For further details, see
page 45.
• Edit: You can edit the name, mobile number, home number, office
number, E-mail, group, memo and picture by press the left soft key
[Select].
• Copy To Phone: You can copy an entry from SIM to phone.
• Assign Speed Dial: If you assign the Speed Dial, you can call directly by
pressing
in idle mode.
• Main Number: You can select the main number out of your mobile,
home or office numbers. Choose the one that is most often used. The
main number will be displayed first, if you set this.
65
Address Book
New Contact
Menu 5.2
You can add a address book entry by using this function. Phone memory
capacity is 255 entries. SIM card memory capacity depends on the cellular
service provider. You can also save 20 characters of name in the phone
memory, and save characters in the SIM card. The number of characters is
dependent on the SIM.
1. Open the Address Book first by pressing the right soft key [Names] in
standby mode.
2. Scroll to highlight New Contact, and press the left soft key [Select].
3. You can add new address book entries to SIM memory or the address
book memory. To select the memory, go to Set memory (Menu 7.8.1).
(Refer to page 83.)
• Adding new entries into SIM memory
You can enter a name and number, and select the required group.
(Depends on the SIM)
• Adding new entries into phone memory
You can enter a name, numbers, E-mail address and memo, and select the
required group.
Speed Dial List
Menu 5.3
You can assign any of the keys,
to
with a name list entry. You
can call directly by pressing this key for 2-3 seconds.
1. Open the Address Book first by pressing the right soft key [Names] in a
standby mode.
2. Scroll to Speed Dials, then press the left soft key [Select].
3. If you want to add a number to speed dial, select . Then, you
can search the name from the Address Book.
66
Address Book
4. Select the name from the speed dial. You can change and delete the
name. In addition, you can call by this number, write text message, and
multimedia message.
Caller Groups
Menu 5.4
There are 6 predefined groups as well as one additional group labeled
Others where you can create your own lists.
1. You can set the phone to ring in a specific way and display a preselected
graphic icon when a particular person calls you.
2. Scroll to Caller Groups then press the left soft key [Select] to enter this
menu.
3. Every Group list will be displayed: Family, VIP, Friends, Colleague,
Group 1, Group 2, Others.
4. Select the Group name that you want to manage by pressing
the left soft key [Options].
5. You will see the following submenus under the predefined groups
except for the Others group.
• Members List: Allows you to see the member list in the group.
• Group Ring Tone: Allows you to select the ring tone to be used when
you receive a voice phone call from a person in the group.
• Group Icon: Allows you to select the graphic icon to be displayed
when you receive a call from a person in the group.
• Add Member: Allows you to add the member to the group.
• Delete Member: Allows you to delete the member in the group.
• Rename: Allows you to assign a name to the group.
67
Address Book
Copy All
Menu 5.5
You can copy or move entries from the SIM card memory to the phone
memory and vice versa.
SIM To Phone (Menu 5.5.1)
You can copy the entry from the SIM card to phone memory.
Phone To SIM (Menu 5.5.2)
You can copy the entry from the phone memory to the SIM card.
The following options are available:
] Keep Original: When copying, Original Dial Number is kept.
] Delete Original: When copying, Original Dial Number will be erased.
Delete All
Menu 5.6
You can delete all entries in the SIM, Phone and Voice Tag List. This
function requires the security code except for Voice.
Press the
key to return to the standby mode.
Settings
Menu 5.7
Set Memory (Menu 5.7.1)
Scroll to highlight the Set Memory option, then press the left soft key
[Select].
] If you select Always Ask when adding entry, the phone will ask where
to store.
] If you select SIM or Phone, the phone will store an entry to the SIM or
the phone.
68
Address Book
Information
Menu 5.8
* Service Dial Number (Menu 5.8.1)
You can view the list of Service Dialing Numbers (SDN) assigned by your
network provider(If supported by the SIM card). Such numbers include the
emergency, directory assistance and voice mail numbers.
1. Select the Service dial number option.
2. The names of the available services will be shown.
3. Use the up/down navigation keys to select a service. Press the
key.
Memory Status (Menu 5.8.2)
You can check how many names and numbers are stored in the Address
Book (SIM card and phone memories).
* Own Number (Menu 5.8.3)
Allows you to display your phone number in the SIM card.
*: Shown only if supported by SIM card
69
Fun & Tools
My Media
Menu 6.1
Sounds (Menu 6.1.1)
The left soft key [Options] will bring up the following options.
] Set As Ring Tone: This sets the Ring Tone with currently selected
Sound.
] Edit Title: This deletes the Title of currently selected Sound.
] Delete: This deletes currently selected Sound.
] Delete All: This deletes all sounds.
Graphics (Menu 6.1.2)
The left soft key [Options] will bring up the following options.
] Set As Wallpaper: Currently selected Picture can be set as a Wallpaper.
] Edit Title: Title of currently selected Picture can be edited
] Delete: Currently selected Picture can be deleted.
] Delete all: All Pictures can be deleted.
70
Fun & Tools
Alarm Clock
Menu 6.2
Set the alarm to ring at a specific time. In the Alarm Clock menu, the
following options are available:
On: Set the time(hour and minute) for activating the alarm.
1. Enter the menu.
2. Select [On] by pressing the right/left navigation keys.
3. If you want to set the time for activating the alarm, press the down
navigation key.
4. Enter the required time, press the down navigation key.
5. The following options are available.
• Once: The alarm rings only once and is then deactivated.
• Daily: The alarm rings every day at the same time.
• Weekly: The alarm rings every week on the same day and at the same
time.
• Monthly: The alarm rings every month on the same day and at the
same time.
6. Allows you to select the alarm melody by using the right/left navigation
keys.
7. Press the left soft key [Set].
Off: Cancel the alarm.
n Notice If this option is set to On, the alarm will ring at the specified time, even
when the phone is switched off.
To stop the alarm when it rings, open the phone and press the right soft
key[Quit].
71
Fun & Tools
Calendar
Menu 6.3
When you enter this menu a calendar will be displayed. Top of the
screen indicates sections for date. Square cursor is used to locate a
particular day. The under bar on the calendar indicates a schedule or
memo on that day. This function helps to remind you of the schedule and
memo. The phone will sound an alarm tone if it has been set for a
specific note.
For changing the day, month, and year.
Key
Description
up/down navigation key
Weekly
left/right navigation key
Daily
key/
key
Yearly
key/
key
Monthly
n Note Your phone should be switched on to use this function.
] View
All Daily Schedules: Press the left soft key [Options] to delete
or edit the note you selected.
] View
All Schedules: Shows the notes that are set for all days. Use the
up/down navigation keys to browse through the note lists. You can use
the menu by press the left soft key [Options].
] Go
To Date: Allows you to jump to a specific date.
] Delete
Past: Delete past schedule event that has already been notified.
] Delete
All: Delete all schedules. You are asked to confirm your action.
] Scheduler
Tone: The phone can sound an alarm tone when the
scheduled date for an event has been reached with this option.
72
Fun & Tools
Calculator
Menu 6.4
Using this feature, you can use the phone as a calculator. The calculator
provides the basic arithmetic functions: addition, subtraction,
multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Use the navigation keys to select a sign for calculation.
n Note To include a negative number, press the
key.
3. To calculate the result, press the left soft key [Result]or
Memo
key.
Menu 6.5
To write, edit and delete a memo on a specific date, proceed as follows.
1. Press the left soft key [Add].
2. Input the memo and press the left soft key [Options].
The following options are available.
] Save: Allows you to save the memo.
] T9 Languages: Allows you to select the T9 language to use in memo.
] Exit Editor: Allows you to exit in memo editor.
Or
1. Select a Memo.
2. Press the left soft key [Options].
The following options are available.
] View: Allows you to view the memo.
] Delete: Allows you to delete the memo. You can press the left soft key
[Options > Delete] to edit the memo displayed.
73
Fun & Tools
] Edit: If you select a memo that already exists, you can press the left soft
key [Options > Edit] to edit the memo displayed.
] Add New: Add a new memo, up to 20 memos and 40 characters per each
memo.
] Delete All: Allows you to delete all memos. You are asked to confirm
your action.
World Clock
Menu 6.6
Allows you to check the current Greenwich Mean Time(GMT) and 51
major cities around the world, using the left/right navigation keys.
The screen shows the city name, current date and time.
To select the time zone in which you are located, proceed as follows:
1. Select the city corresponding to your time zone by pressing the left/right
navigation keys one or more times. The local date and time are
displayed.
2. Press the left soft key [Options].
3. If you want to set, press the
key.
4. If you want to set Daylight Savings, press the
menu.
key in Options
n Note The time zone setting of each city in World time menu may be affected
by network condition.
74
Fun & Tools
Unit Converter
Menu 6.7
This converts any measurement into a unit you want.
There are 4 types that can be converted into units: Length, Surface,
Weight, and Volume.
1. You can select one of four unit types by pressing the left soft key [Unit].
2. Select the standard value by using the left/right navigation keys.
3. Select the unit you want to convert by pressing the up/down navigation
keys.
4. You can check the converted value for the unit you want. Also, you can
input a decimal number by pressing the
key.
75
Web Access
You can access various WAP(Wireless Application Protocol) services such
as banking, news, weather reports, and flight information. These services
are specially designed for mobile phones and they are maintained by the
WAP service providers.
Check the availability of WAP services, pricing and tariffs with your
network operator and/or the service provider whose service you wish to
use. Service providers will also give you instructions on how to use their
services.
Please contact your service provider to open an Internet account. To use
the Web Browser, you must indicate your phone number via the Own
number menu option (See page 84 for further details.)
To launch the browser in standby mode, press and hold down the
key. Once connected, the homepage is displayed. The content
depends on the service provider.
You can open any WWW page by entering its URL address.
To exit the browser at any time, press the
key. The idle screen is
displayed.
Navigating with the WAP Browser
You can surf the Internet using either the phone keys or the WAP Browser
menu.
Using the Phone Keys
When surfing the Internet, the phone keys function differently from the
phone mode.
Key
up/down navigation key
76
Description
Scroll each line of the content area
Web Access
Using the WAP Browser Menu
There are various menu options available when surfing the Wireless Web.
n Note The WAP Browser menus may vary, depending on your version of the
browser.
Home
Menu 7.1
Connect to a homepage. The homepage may be the site which is defined in
the activated profile. It will be defined by the Service Provider if you have
not defined it in the activated profile.
Favorites
Menu 7.2
Your phone may have some pre-installed bookmarks for sites not affiliated
with LG. LG does not warrant or endorse these sites. If you choose to
access them, you should take the same precautions, for security or content,
as you would with any site.
Options in the Favorites view
• Connect: Connect to the URL address to download the ring tone.
• View: View the URL address of the Bookmark.
• Delete: Delete the URL address.
• Edit: Modify the Bookmark.
• Move: Move the Bookmark to other folder.
• New Bookmark: Create new bookmark in current folder.
• New Folder: Create new sub-folder.
• Send URL: Allows the stored URL under Bookmark to be sent via
SMS to another person.
• Delete All: Allows you to erase all bookmarks.
77
Web Access
Go To URL
Menu 7.3
You can directly connect to the site you want. You need to enter a specific
URL.
Access Point
Menu 7.4
A Profile is the network information used to connect to the internet. Telcel
supports two kinds of profiles: Telcel and GPRS Telcel.
If you want to connect the internet using CSD(Circuit Switched Data),
select the profile ‘Telcel’. otherwise using GPRS, select the profile ‘GPRS
Telcel’.
Because Telcel also selects a bearer automatically according to the current
network status, the user doesn’t need to select any of them.
Each profile has submenus as follows:
1. Activate
4. Add New
2. Settings
5. Delete
3. Rename
6. Delete All
] Activate: Set a current profile as a default.
] Settings: Edit the various items of the current profile.
] Rename: Revise the name of profile.
] Add New: Create new profile.
] Delete: Delete the profile.
] Delete All: Allows all Profiles within the Access Point to be deleted so
please take precaution prior to using this option.
n Note The changes using these options may affect the other application
function.
78
Web Access
Cache Settings
Menu 7.5
The information or services you have accessed are stored in the cache
memory of the phone.
Clear Cache (Menu 7.5.1)
Remove all contexts saved in cache.
Disallow Cache (Menu 7.5.2)
Set a value whether a connection attempt is made through cache or not.
n Note A cache is a buffer memory, which is used to store data temporarily.
Information
Menu 7.6
The WAP Browser version is displayed.
79
Q&A
Please check to see if any problems you have encountered with the phone
are described in this section before taking the phone in for a service or
calling a service engineer.
How do I view the list of outgoing calls, incoming calls and missed
calls?
Press the
key.
Q How do I clear all call history?
A Press the left soft key[Menu] and then the
key.
Q How do I view all numbers stored in memory?
A Press right soft key[Names] and then
Q Why is the connection inconsistent or not audible in certain areas?
A When frequency environment is unstable in a certain area, connection
may be inconsistent and not audible. Relocate to another area and try
again.
Q Why is the connection not consistent abruptly disconnects even when
established?
A When frequency is unstable or weak or if there are too many users,
connection may be cut off even after it was established. Please try again
later or attempt after relocating to other areas.
80
Q&A
Q Why does the LCD not turn on?
A Remove the battery and turn on the power after placing it back on. If
there is no change, fully charge the battery and try again.
Q Why is there an echo when a connection is made with certain
telephones in a certain area?
A This is called the ‘Echo Phenomenon’, where it occurs if connection
volume is too high or caused by special properties (semi electronic
telephone exchange) of the equipment on the other end.
Q Why does the phone heat up?
A The phone may get hot when there is a very long call duration or when
games are played or even when surfing the Internet for a long time. This
has no effect upon the life of the product or performance.
Q Why is there no ring tone, but only a blinking LCD screen?
A Phone may be set to ‘Vibration All’ or in ‘Silent All’ mode. In the
Sound menu, please select Volume > Ring tone > Volume 1 ~ Volume
5, or Vol5&Vib.
Q Why does the battery life get shorter in standby mode?
A The battery is worn out. As time passes, the battery life gradually
becomes shorter. If the battery lasts about half the amount of time as
when first purchased, it’s time to purchase a new battery.
81
Q&A
Q Why does the battery run out so quickly during normal use?
A It is due to the user environment or a large number of calls or weak
signal.
Q Why is no number dialed when you recall a Address Book entry?
A Check that the number has been stored correctly by using the Address
book Search feature. Re-store them, if necessary.
Q Why can’t my correspondent reach me?
A Is you phone switched on (
pressed for more than three seconds)?
Are you accessing the right cellular network? Or, you may have set an
incoming call barring option.
82
Accessories
There are a variety of accessories available for your mobile phone. You
can select these options according to your personal communication
requirements. Consult your local dealer for availability.
Travel Adapter
This adapter allows you to charge the
battery.
It supports standard U.S. 120 Volt 60Hz
outlets.
It takes 5 hours to charge a completely
discharged battery.
Battery
Standard battery is available.
Vehicle Power Adapter
You can operate the phone and trickle
charge the phone battery from your vehicle
by using the vehicle power adapter.
It takes 5 hours to charge a completely
discharged battery.
83
Accessories
Headset
Connects to your phone, allowing hands-free
operation. Includes earpiece, microphone,
and integrated call answer/termination
button.
Data Cable Kit
Connects your phone to a PC.
84
Safety Guidelines
TIA Safety Information
Provided herein is the complete TIA Safety Information for Wireless
Handheld phones. Inclusion of the text covering Pacemakers, Hearing
Aids, and Other Medical Devices is required in the owner’s manual for
CTIA Certification. Use of the remaining TIA language is encouraged
when appropriate.
Exposure to Radio Frequency Signal
Your wireless handheld portable telephone is a low-power radio
transmitter and receiver. When it is ON, it receives and also sends out
radio frequency (RF) signals.
In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld wireless
phones. Those guidelines are consistent with the safety standards
previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic evaluations of
the relevant scientific literature. For example, over 120 scientists,
engineers, and physicians from universities, government health agencies,
and industry reviewed the available body of research to develop the ANSI
Standard (C95.1).
*American National Standards Institute; National Council on Radiation
Protection and Measurements; International Commission on Non-Ionizing
Radiation Protection
The design of your phone complies with the FCC guidelines (and those
standards).
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the phone and may
violate FCC regulations.
85
Safety Guidelines
Phone Operation
NORMAL POSITION: Hold the phone as you would any other telephone
with the antenna pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently:
] Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects call quality and may cause the phone to
operate at a higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless phones in the areas
where you drive. Always obey them. Also, if using your phone while
driving, please:
] Give full attention to driving — driving safely is your first responsibility;
] Use hands-free operation, if available;
] Pull off the road and park before making or answering a call if driving
conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals. However,
certain electronic equipment may not be shielded against the RF signals
from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of six (6’) inches be maintained between a handheld
wireless phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with the independent
research by and recommendations of Wireless Technology Research.
86
Safety Guidelines
Persons with pacemakers:
] Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON;
] Should not carry the phone in a breast pocket.
] Should use the ear opposite the pacemaker to minimize the potential for
interference.
] If you have any reason to suspect that interference is taking place, turn
your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of
your device to determine if they are adequately shielded from external RF
energy. Your physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any equipment that has been
added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so require.
87
Safety Guidelines
Aircraft
FCC regulations prohibit using your phone while in the air. Turn your
phone OFF before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your phone OFF when
in a ‘blasting area’ or in areas posted: ‘Turn off two-way radio’. Obey all
signs and instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always,
marked clearly. Potential areas may include: fueling areas (such as
gasoline stations); below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum gas (such as propane
or butane); areas where the air contains chemicals or particles (such as
grain, dust, or metal powders); and any other area where you would
normally be advised to turn off your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects, including
either installed or portable wireless equipment, in the area over the air bag
or in the air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
88
Safety Guidelines
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for Devices and
Radiological Health Consumer Update on Mobile Phones.
1.Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems
are associated with using wireless phones. There is no proof, however,
that wireless phones are absolutely safe. Wireless phones emit low levels
of radiofrequency energy (RF) in the microwave range while being used.
They also emit very low levels of RF when in the standby mode.
Whereas high levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been
confirmed by additional research. In some cases, other researchers have
had difficulty in reproducing those studies, or in determining the reasons
for inconsistent results.
2.What is the FDA’s role concerning the safety of wireless
phones?
Under the law, the FDA does not review the safety of radiation-emitting
consumer products such as wireless phones before they can be sold, as it
does with new drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to emit
radiofrequency energy (RF) at a level that is hazardous to the user. In
such a case, the FDA could require the manufacturers of wireless phones
to notify users of the health hazard and to repair, replace, or recall the
phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the wireless phone industry to take a number
of steps, including the following:
89
Safety Guidelines
] Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
] Design wireless phones in a way that minimizes any RF exposure to the
user that is not necessary for device function; and
] Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
The FDA belongs to an interagency working group of the federal agencies
that have responsibility for different aspects of RF safety to ensure
coordinated efforts at the federal level. The following agencies belong to
this working group:
o National Institute for Occupational Safety and Health
o Environmental Protection Agency
o Occupational Safety and Health Administration
o National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working
group activities, as well.
The FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are sold in
the United States must comply with FCC safety guidelines that limit RF
exposure. The FCC relies on the FDA and other health agencies for safety
questions about wireless phones.
The FCC also regulates the base stations that the wireless phone networks
rely upon. While these base stations operate at higher power than do the
wireless phones themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than those they can get
from wireless phones. Base stations are thus not the subject of the safety
questions discussed in this document.
90
Safety Guidelines
3.What kinds of phones are the subject of this update?
The term ‘wireless phone’ refers here to handheld wireless phones with
built-in antennas, often called ‘cell’, ‘mobile’, or ‘PCS’ phones. These
types of wireless phones can expose the user to measurable
radiofrequency energy (RF) because of the short distance between the
phone and the user’s head.
These RF exposures are limited by FCC safety guidelines that were
developed with the advice of the FDA and other federal health and safety
agencies. When the phone is located at greater distances from the user,
the exposure to RF is drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the source. The so-called
‘cordless phones,’ which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety limits.
4.What are the results of the research done already?
The research done thus far has produced conflicting results, and many
studies have suffered from flaws in their research methods. Animal
experiments investigating the effects of radiofrequency energy (RF)
exposures characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories. A few animal
studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the
studies that showed increased tumor development used animals that had
been genetically engineered or treated with cancer-causing chemicals so
as to be pre-disposed to develop cancer in the absence of RF exposure.
Other studies exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under which people use
wireless phones, so we don’t know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since December
2000. Between them, the studies investigated any possible association
between the use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or salivary gland,
91
Safety Guidelines
leukemia, or other cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless phone RF
exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these
studies was around three years.
5.What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the data
that are needed. Lifetime animal exposure studies could be completed in
a few years. However, very large numbers of animals would be needed to
provide reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is directly applicable to
human populations, but 10 or more years follow-up may be needed to
provide answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a cancer-causing
agent and the time tumors develop — if they do — may be many, many
years. The interpretation of epidemiological studies is hampered by
difficulties in measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model of phone is used.
6.What is the FDA doing to find out more about the possible
health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high priority
animal studies are conducted to address important questions about the
effects of exposure to radiofrequency energy (RF).
The FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF) Project since
its inception in 1996. An influential result of this work has been the
development of a detailed agenda of research needs that has driven the
establishment of new research programs around the world. The project
92
Safety Guidelines
has also helped develop a series of public information documents on
EMF issues.
The FDA and the Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety. The FDA
provides the scientific oversight, obtaining input from experts in
government, industry, and academic organizations. CTIA-funded
research is conducted through contracts with independent investigators.
The initial research will include both laboratory studies and studies of
wireless phone users. The CRADA will also include a broad assessment
of additional research needs in the context of the latest research
developments around the world.
7.How can I find out how much radio frequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC established these guidelines
in consultation with the FDA and the other federal health and safety
agencies. The FCC limit for RF exposure from wireless telephones is set
at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6
W/kg). The FCC limit is consistent with the safety standards developed
by the Institute of Electrical and Electronic Engineering (IEEE) and the
National Council on Radiation Protection and Measurement. The
exposure limit takes into consideration the body’s ability to remove heat
from the tissues that absorb energy from the wireless phone and is set
well below levels known to have effects. Manufacturers of wireless
phones must report the RF exposure level for each model of phone to the
FCC. The FCC website (http://www.fcc.gov/oet/ rfsafety) gives
directions for locating the FCC identification number on your phone so
you can find your phone’s RF exposure level in the online listing.
8.What has the FDA done to measure the radio frequency
energy coming from wireless phones?
93
Safety Guidelines
The Institute of Electrical and Electronic Engineers (IEEE) is developing
a technical standard for measuring the radio frequency energy (RF)
exposure from wireless phones and other wireless handsets with the
participation and leadership of FDA scientists and engineers. The
standard, ‘Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to Wireless
Communications Devices: Experimental Techniques,’ sets forth the first
consistent test methodology for measuring the rate at which RF is
deposited in the heads of wireless phone users. The test method uses a
tissue-simulating model of the human head. Standardized SAR test
methodology is expected to greatly improve the consistency of
measurements made at different laboratories on the same phone. SAR is
the measurement of the amount of energy absorbed in tissue, either by
the whole body or a small part of the body. It is measured in watts/kg (or
milliwatts/g) of matter. This measurement is used to determine whether a
wireless phone complies with safety guidelines.
9.What steps can I take to reduce my exposure to
radiofrequency energy from my wireless phone?
If there is a risk from these products — and at this point we do not know
that there is — it is probably very small. But if you are concerned about
avoiding even potential risks, you can take a few simple steps to
minimize your exposure to radiofrequency energy (RF). Since time is a
key factor in how much exposure a person receives, reducing the amount
of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source of
the RF, since the exposure level drops off dramatically with distance. For
example, you could use a headset and carry the wireless phone away
from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are
harmful. But if you are concerned about the RF exposure from these
products, you can use measures like those described above to reduce
your RF exposure from wireless phone use.
94
Safety Guidelines
10.What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps to
lower exposure to radiofrequency energy (RF), the measures described
above would apply to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised
that children be discouraged from using wireless phones at all. For
example, the government in the United Kingdom distributed leaflets
containing such a recommendation in December 2000. They noted that
no evidence exists that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit wireless phone use by
children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
11.What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact with
some electronic devices. For this reason, the FDA helped develop a
detailed test method to measure electromagnetic interference (EMI) of
implanted cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard sponsored by the
Association for the Advancement of Medical instrumentation (AAMI).
The final draft, a joint effort by the FDA, medical device
manufacturers, and many other groups, was completed in late 2000.
This standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone EMI.
The FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for
hearing aids and wireless phones so that no interference occurs when a
person uses a ‘compatible’ phone and a ‘compatible’ hearing aid at the
95
Safety Guidelines
same time. This standard was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful interference be
found to occur, the FDA will conduct testing to assess the interference
and work to resolve the problem.
12.Where can I find additional information?
For additional information, please refer to the following resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
96
Safety Guidelines
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government’s Requirements for
Exposure to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission
(FCC) of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and
health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6W/kg. * Tests for SAR are conducted using
standard operating positions specified by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although SAR is determined at the highest certified power level,
the actual SAR level of the phone while operating can be well below the
maximum value. Because the phone is designed to operate at multiple
power levels to use only the power required to reach the network, in
general, the closer you are to a wireless base station antenna, the lower the
power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and worn on the body)
as required by the FCC for each model. The highest SAR value for this
model phone when tested for use at the ear is 1.40 W/kg and when worn
on the body, as described in this user’s manual, is 1.15 W/kg. (Body-worn
97
Safety Guidelines
measurements differ among phone models, depending upon available
accessories and FCC requirements.) While there may be differences
between SAR levels of various phones and at various positions, they all
meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model phone is on file with
the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID BEJMG191A.
Additional information on Specific Absorption Rates (SAR) can be found
on the Cellular Telecommunications Industry Association (CTIA) website
at http://www.wow-com.com
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements.
98
Glossary
To help you understand the main technical terms and abbreviations used in
this booklet and take full advantage of the feature on your mobile phone,
here are a few definitions.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Divert
Ability to reroute calls to another number.
Call waiting
Ability to inform users that they have an incoming call when engaged on
another call.
GPRS (General Packet Radio Service)
GPRS guaranties continuous connection to the Internet for mobile phone
and computer users. It is based on the Global System for Mobile
Communication (GSM) circuit-switched cellular phone connections and
the Short Message Service (SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication, guaranteeing
compatibility between the various network operators. GSM covers most
European countries and many other parts of the world.
99
Glossary
Java
Programming language generating applications that can run on all
hardware platforms, whether small, medium or large, without modification.
It has been promoted for and geared heavily to the Web, both for public
Web sites and Intranets. When a Java program runs from a Web page, it is
called a Java applet. When it is run on a mobile phone or pager, it is called
a MIDlet.
Line Identification Services (Caller ID)
Service allowing subscribers to view or block the telephone numbers of
callers.
Multiparty Calls
Ability to establish a conference call involving up to five additional parties.
Phone Password
Security code used to unlock the phone when you have selected the option
to lock it automatically each time it switches on.
Roaming
Use of your phone when you are outside your home area (when traveling
for example).
SDN (Service Dial Number)
Telephone numbers supplied by your network provider and giving access
to special services, such as voice mail, directory inquiries, customer
support and emergency services.
100
Glossary
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to operate the
phone (network and memory information, as well as the subscriber's
personal data). The SIM card fits into a small slot on the back of the phone
and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and from another
subscriber without having to speak to the correspondent. The message
created or received (up to 160 characters long) can be displayed, received,
edited or sent.
Patent Information
This product was manufactured under one or more of the following U.S.
patents: 5276765 5749067 6061647
DATE: 2004.11.10 (HS)
101
Index
Access codes
25
97
Accessories
14,15
Active flip
59,52,71,74
Add new
79
Add member
34,76
Address book
27
Adjusting the volume
70
Alarm clock
27
Answering a call
87
Answer mode
54
Auto display
89
Auto redial
Backlight
Barring password
Battery
Bearer setting
Bookmarks
Business card
16,83
25
8,13,18,22,97
45
58,62,64
43,56
Cache check
Calculator
Calendar
Caller groups
102
60
73
71
79
Call barring service
Call divert
Call durations
Call waiting
Cancel all barrings
Change password
Clear cache
Clear key
Closed user group
Conference calls
Copy all
CPHS
90
113
67
87
91
91
60
14,15
89
37
80
39,40,41
Delete recent calls
Delivery reports
Dialed calls
Display screen
Display information
67
45
66,67
14,15
17
End key
Ending a call
Entering text
14,15
26
28
Index
FDN
Fixed dial number
Flip open
91
91
87
Games
Go to URL
GPRS
Group icon
Group ring tone
18,98
Inbox
In-call menu
Infrared
Infrared port
55,84
67
31
61,64
59
93,113
79
79
Headset
Languages
Last call
Lower case
43,47,53,54
35
14
14,15,16
Making a Call
Making international calls
Menu tree
Memo
Member list
Memory status
Message center URL
Message key
Message types
Microphone
Minute minder
Missed calls
Muting the microphone
Multimedia messages
26
26
39
73
79
56,63
51
14,15
44
14,15
88
66
36
46
103
Index
Navigation Key
14,15
Outbox
Own number
44,48
81
Templates
Text messages
Time format
Travel adapter
55
42
85
97
Phone to SIM
Power key
Private call
80
14,15
38
Received Calls
66
Security code
Send
Send my number
Set memory
Service dial number
Scheduler tone
Side keys
Signal strength
SIM to phone
Speed dials
Sub LCD
104
25
14,15,26
87
80
81,114
71
14,15
28
80
77
23
Unit converter
Upper case
75
31
Valid period
Vibrate mode
Voice dial
Voice mailbox number
Voice recorder
44,51
28
88
52
72
Wallpaper
WAP browser
WAP information
World phone
World time
Write message(s)
83
57
60,69
92
74
42,46
105
Briefly press the
Open the flip and
press the
key.
End a Call
Answer a Call
key.
Adjust the Volume Press the Side keys of
(During a call)
the phone.
1. Key in the number.
2. Press the
key.
Making a Call
Press and hold
Power on/off
5. Press the left soft key [Select] to confirm.
4. Scroll with the up/down navigation keys through the list of options
until the required one is selected.
3. Press the left soft key [Select].
2. Scroll with the up/down navigation keys through the list of menus
until you reach the required menu.
1. Press the left soft key [Menu].
Access the Menu Function
Quick Reference Card
Search
Choose the
Alert Type
key.
2. Press the left soft key [Select].
1. Press the right soft key [Names].
4. Press the
3. Press the left/right navigation keys.
2. Select an option:
Silent All, Vibration All, Volume 1~5,
Vol5&Vib.
1. In standby mode, press left navigation
key,
(Volume) and
(Ring tone).
5. Press the left soft key [Save].
4. Enter the name.
3. Press the left soft key [OK], [Select].
Store numbers in 1. Key in the number.
the Address Book
2. Press the left soft key [Options].

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:02:17 15:04:04-05:00
Create Date                     : 2005:02:17 14:55:00-05:00
Title                           : MG191a_0125-Ω¬¿ŒøÎ
Author                          : 
Creator                         : QuarkXPress¢‚: LaserWriter 8 KH-8.7.1
Producer                        : Acrobat Distiller 6.0 for Macintosh
Page Count                      : 104
Mod Date                        : 2005:02:17 15:04:04-05:00
Creation Date                   : 2005:02:17 14:55:00-05:00
Metadata Date                   : 2005:02:17 15:04:04-05:00
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BEJMG191A

Navigation menu