LG Electronics USA MG210 Dual Band GSM/GPRS Flip Phone User Manual MG210 RSA ENG 0123
LG Electronics USA Dual Band GSM/GPRS Flip Phone MG210 RSA ENG 0123
Revised Manual
MG210
User Guide
2
Unpacking................................................................. 7
For Your Safety......................................................... 8
Your Phone ............................................................. 12
Phone Components .......................................................... 12
Your Phone’s Features..................................................... 13
Display Information.......................................................... 14
Getting Started....................................................... 16
Installing the SIM Card ................................................... 16
Charging the Battery........................................................ 17
Turning Your Phone On and Off ..................................... 18
Access Codes.................................................................... 19
General Functions ................................................. 20
Making a Call.................................................................... 20
Making a Call by Send Key.............................................. 20
Making International Calls .............................................. 20
Ending a Call ...................................................................... 20
Making a Call From the Contact List.............................. 20
Adjusting the Volume ...................................................... 21
Answering a Call.............................................................. 21
Vibrate Mode (Quick) ....................................................... 21
Signal Strength.................................................................. 21
Entering Text ..................................................................... 21
Selecting Functions and Options ....................... 25
Address Book......................................................... 26
In-Call Menu........................................................... 27
During a Call...................................................................... 27
Making a Second Call ...................................................... 27
Swapping Between Two Calls........................................ 27
Answering an Incoming Call........................................... 27
Rejecting an Incoming Call ............................................. 27
Muting the Microphone................................................... 27
Multiparty or Conference Calls ..................................... 28
Making a Second Call ...................................................... 28
Setting Up a Conference Call.......................................... 28
Activate the Conference Call on Hold ........................... 28
Adding Calls to the Conference Call.............................. 28
Private Call in a Conference Call.................................... 28
Table of Contents
3
Ending a Conference Call ................................................ 28
Menu Tree............................................................... 29
Audio........................................................................ 33
Ringtones ........................................................................... 33
Volume................................................................................ 33
Ring Alert Type ................................................................. 33
Message Alert Tones....................................................... 33
Key Tones........................................................................... 33
Messaging .............................................................. 34
New Message................................................................... 34
Text...................................................................................... 34
Multimedia ......................................................................... 35
Inbox ................................................................................... 36
Drafts .................................................................................. 36
Outbox .................................................................................36
Sent ......................................................................................37
Listen To Voice Mail.........................................................37
Info Service ........................................................................37
Templates ...........................................................................37
Text...................................................................................... 37
Multimedia ......................................................................... 38
Business Card ................................................................... 38
Settings .............................................................................. 38
Text Message.................................................................... 38
MMS Message.................................................................. 39
Voicemail Number .............................................................39
Download Message ..........................................................39
Check Memory.................................................................. 40
Web Access ........................................................... 41
Home................................................................................... 42
Favorites............................................................................. 42
Go To URL........................................................................... 42
Network Profile ................................................................ 42
Cache Settings.................................................................. 43
Clear Cache ....................................................................... 43
Allow Cache....................................................................... 43
4
Security Certificates........................................................ 43
Information ........................................................................ 43
Games & Apps........................................................ 44
Games & Apps................................................................... 44
Favorites............................................................................. 44
Information ........................................................................ 45
Check Memory .................................................................. 45
Java Version...................................................................... 45
My Folder ................................................................ 46
Favorites............................................................................. 46
Games & Apps................................................................... 46
Audio................................................................................... 46
Graphics............................................................................. 46
Multimedia ........................................................................ 47
Recent Calls ........................................................... 48
Missed Calls...................................................................... 48
Dialed Calls ....................................................................... 48
Received Calls .................................................................. 48
Delete Recent Calls ......................................................... 48
Call Duration ..................................................................... 49
Last Call .............................................................................. 49
Dialed Calls .........................................................................49
Received Calls....................................................................49
All Calls................................................................................49
Call Costs ........................................................................... 49
Last Call ...............................................................................49
All Calls................................................................................49
Cost Settings ..................................................................... 50
Call Cost’s Limit ..................................................................50
Set Tariff..............................................................................50
Auto Display........................................................................50
Data Information............................................................... 50
Web Data ............................................................................50
Data Call ..............................................................................50
Total Data............................................................................50
5
Tools ........................................................................ 51
Alarm Clock....................................................................... 51
Calendar............................................................................. 51
Voice Memo .......................................................................52
Calculator .......................................................................... 53
Notepad.............................................................................. 53
World Clock....................................................................... 54
Unit Converter ................................................................... 54
Tip Calculator.................................................................... 55
Stopwatch.......................................................................... 55
Address Book......................................................... 56
Contacts ............................................................................. 56
New Contact...................................................................... 56
Speed Dial List.................................................................. 57
Caller Groups .................................................................... 57
Copy All Contacts ............................................................. 58
SIM To Phone.................................................................... 58
Phone To SIM.................................................................... 58
Delete All Contacts .......................................................... 58
Settings .............................................................................. 58
Set Memory ....................................................................... 58
Set View Detail.................................................................. 59
Information ........................................................................ 59
Service Dial Number ........................................................ 59
Check Memory .................................................................. 59
My Number ........................................................................ 59
Settings ................................................................... 60
Display................................................................................ 60
Wallpaper........................................................................... 60
Backlight Timer ................................................................. 60
Contrast .............................................................................. 60
Languages.......................................................................... 60
LED Indicator ..................................................................... 61
Date & Time....................................................................... 61
Set Date.............................................................................. 61
Date Format ....................................................................... 61
Set Time.............................................................................. 61
Time Format ....................................................................... 61
6
Call ..................................................................................... 61
Call Forwarding ................................................................. 61
Answer Mode.................................................................... 62
Send My Number.............................................................. 62
Call Waiting........................................................................ 62
Minute Minder................................................................... 62
Auto Redial......................................................................... 62
Closed User Group............................................................ 62
Send DTMF ........................................................................ 63
Security .............................................................................. 63
PIN Code Request............................................................. 63
Call Barring Services ....................................................... 63
Fixed Dial Number (FDN) ................................................. 64
Change Codes ................................................................... 64
Connection......................................................................... 65
Network Selection............................................................ 65
Change Frequency Band ................................................. 65
GPRS Attach ...................................................................... 66
Network Profile ................................................................. 66
Reset Network Profile...................................................... 66
Reset Default..................................................................... 66
Q&A.......................................................................... 67
Accessories............................................................ 69
Safety Guidelines .................................................. 70
Glossary .................................................................. 86
7
Unpacking
Check to make sure that you have all the parts shown below.
Handset
Standard Battery
Headset User Guide
Travel Adapter
8
For Your Safety
Important Information
This user guide contains important information on the
use and operation of this phone. Please read all the
information carefully for optimal performance and to
prevent any damage to or misuse of the phone. Any
changes or modifications not expressly approved in
this user guide could void your warranty for this
equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock,
do not expose your phone to high humidity areas, such
as the bathroom, swimming pool, etc.
Always store your phone away from heat. Never store
your phone in settings that may expose it to
temperatures less than 32°F or greater than 104°F,
such as outside during extreme weather conditions or
in your car on a hot day. Exposure to excessive cold or
heat will result in malfunction, damage and/or
catastrophic failure.
Be careful when using your phone near other
electronic devices. RF emissions from your mobile
phone may affect nearby inadequately shielded
electronic equipment. You should consult with
manufacturers of any personal medical devices such
as pacemakers and hearing aides to determine if they
are susceptible to interference from your mobile
phone. Turn off your phone in a medical facility or at a
gas station. Never place your phone in a microwave
oven as this will cause the battery to explode.
IMPORTANT! Please read the TIA SAFETY
INFORMATION on page 72 before using your phone.
Safety Information
Please read and observe the following information for
the safe and proper use of your phone and to prevent
any unanticipated damage. Also, keep the user’s manual
in an accessible place at all times after reading it.
]Unplug the power cord and charger during a
lightning storm to avoid electric shock or fire.
]Do not use your phone in high explosive areas as
the phone may generate sparks.
9
For Your Safety
]Do not put your phone in a place subject to
excessive dust, and keep the minimum required
distance between the power cord and heat sources.
]Do not damage the power cord by bending, twisting,
pulling, or subjecting it to heat. Do not use the plug if
it is loose as it may cause fire or electric shock.
]Hold the power cord plug firmly to plug and unplug
the power cord. Ensure the plug is firmly connected.
If it is not firmly connected, it may cause excessive
heat or fire.
]Do not place a heavy item on the power cord. Do not
allow the power cord to be crimped as it may cause
fire or electric shock.
]Be careful not to let the battery contact metal
conductors such as a necklace or coins. When
shorted, it may cause an explosion.
]Do not disassemble or impact the battery as it may
cause electric shock, short-circuit, and fire. Store
the battery in a place out of reach of children.
]Using a damaged battery or placing a battery in your
mouth may cause serious injury.
]Charging is displayed on the screen after the travel
adapter is connected. Only if the battery is totally
empty, it takes long time to display “Charging.”
]Do not place items containing magnetic
components such as a credit card, phone card or a
subway ticket, near your phone. The magnetic strip
can be damaged by the phone.
]Do not hold or let the antenna come in contact with
your body during a call.
]Talking on your phone for a long period of time may
reduce the call quality due to heat generated during
the use of the phone.
]Do not allow excessive vibration or impact to the
phone.
]When you do not plan to use the phone for a long
period of time, store it in a safe area with the power
cord unplugged.
10
For Your Safety
FCC RF Exposure Information
WARNING! Read this information before operating the
phone.
In August 1996, the Federal Communications (FCC) of
the United States, with its action in Report and Order
FCC 96-326, adopted an updated safety standard for
human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the
safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC
guidelines and these international standards.
CAUTION
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair
call quality, damage the phone, void your warranty
and/or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with skin, a
minor burn may result. Contact your local dealer for a
replacement antenna.
Body-worn Operation
This device was tested for typical body-worn
operations with the back of the phone kept 15mm
between the use's body and the back of the phone.
To comply with FCC RF exposure requirements, a
minimum separation distance of 15mm must be
maintained between the user’s body and the back of
the phone. Third-party belt-clips, holsters, and similar
accessories containing metallic components should
not be used. Body-worn accessories that cannot
maintain 1.5 cm separation distance between
the user’s body and the back of the phone, and have
not been tested for typical body-worn operations may
not comply with FCC RF exposure limits and should be
avoided.
Vehicle Mounted External Antenna (optional, if
available)
A minimum separation distance of 8 inches (20 cm)
must be maintained between the user/bystander and
the vehicle mounted external antenna to satisfy FCC RF
exposure requirements.
For more information about RF exposure, visit the FCC
website at www.fcc.gov
11
For Your Safety
FCC Part 15 Class B Compliance
This device complies with part 15 of the
FCC rules. Operation is subject to the condition
that this device does not cause harmful interference
Cautions for Battery
]Do not disassemble.
]Do not short-circuit.
]Do not expose to high temperature: 60°C (140°F).
]Do not incinerate.
Battery Disposal
]Please dispose of your battery properly or bring to
your local wireless carrier for recycling.
]Do not dispose in fire or with hazardous or
flammable materials.
Adapter (Charger) Cautions
]Using the wrong battery charger could damage your
phone and void your warranty.
]The adapter or battery charger is intended for
indoor use only.
Do not expose the adapter or battery charger to direct
sunlight or use it in places with high humidity, such as
the bathroom.
12
Your Phone
Phone Components
1. Earpiece 8. Active flip
9. Display screen
10. Navigation key
2. Left soft key
3. Side keys
5. Send key
11. Confirmation key
12. Right soft key
13. Message key
16. Clear key
15. End / Power key
7. Microphone
6. Alphanumeric keys
7:47PM 08 Jan
Menu Names
13
Your Phone
Your Phone’s Features
1. Earpiece
2, 12. Left soft key / Right soft key: Each of these keys
perform the functions indicated by the text on the
display immediately above them.
3. Side keys: These keys are used to control the
volume of ringtone in standby mode and speaker
volume during a call.
4. Tools menu hot key: For further details, see page
54~57.
5. Send key: You can dial a phone number and answer
incoming calls. Press this key in standby mode to
quickly access the most recent incoming, outgoing
and missed calls.
6. Alphanumeric keys: These keys are used to dial a
number in standby mode and to enter number or
characters in edit mode.
7. Microphone: Can be muted during a call for privacy.
8. Active flip: Open the flip to answer an incoming call
and close to end the call.
9. Display screen: Displays phone status icons, menu
items, Web information, pictures and more in full color.
10. Navigation key: Use for quick access to phone
functions.
11. Confirmation key: Long press will launch the WAP
browser. Allows you to select and confirm menu
options.
13. Message key: Use to retrieve or send text
messages.
14. Sounds menu hot key: For further details, see page
33.
15. End/Power key: Allows you to power the phone on
or off, end calls, or return to Standby Mode.
16. Clear key: Allows you to delete the characters
entered or return you to the previous screen.
14
Your Phone
Backlight
A backlight illuminates the display and the keypad.
When you press any key or open the folder, the
backlight turns on. It turns off if no key is pressed
within a given period of time, depending on the
Backlight Timer menu option. After one minute, the
display turns off to conserve your battery power. To
specify the length of time the backlight is active, set
the Backlight Timer menu option (Menu 9.1.2). See
page 62 for further details.
Display Information
LED lamp Ear-microphone
jack
Side keys
Icon area
Text and graphic area
Soft key indications
7:47PM 08 Jan
Menu Names
Area Description
First line Displays various icons. See page 15
Middle lines Display messages, instructions and
Any information that you enter, such
As number to be dialed.
Last line Shows the functions currently
Assigned to the two soft keys.
15
Your Phone
On-Screen Icons
The table below describes various display indicators
or icons that appear on the phone’s display screen.
Icon Description
Indicates the strength of the network
signal.
Indicates a call is in progress.
Indicates that GPRS service is available.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates the receipt of a text message.
Indicates the receipt of a MMS message.
Indicates the receipt of a voice mail.
Indicates that the vibration has been set
for alert.
Indicates the silent has been set for alert.
Indicates Ring has been set for alert.
Indicates that you received new download
message.
Indicates the Schedule function.
16
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and many others.
nImportant!
The plug-in SIM card and its contacts can be easily
damaged by scratches or bending, so be careful when
handling, inserting or removing the card. Keep all SIM cards
out of the reach of small children.
1. If necessary, switch off the phone by holding down
the key until the power-off image displays.
2. Remove the battery. To do so:
1Pull and hold the battery lock above the battery
toward the top of the phone.
2Lift the battery away, as shown.
3. Slide the SIM card into the SIM card socket so that
it locks the card into place. Make sure that the
notched corner is bottom left and the gold contacts
of the card face into the phone.
nNote
When you need to remove the SIM card, slide it, as shown,
and take it out of the socket.
➁
➃
➂
➀
17
Getting Started
4. Place the battery so that the tabs on the end align
with the slots at the bottom of the phone.
5. Press the battery until it clicks into place. Make sure
that the battery is properly installed before switching
the phone on.
Charging the Battery
Use of unauthorized accessories could damage your
phone and invalidate your warranty.
To use the travel adapter provided with your phone:
1. With the battery in position on the phone, connect
the lead from the travel adapter to the bottom of the
phone. Check that the arrow on the lead connector
is facing towards the front of the phone.
2. Connect the adapter to a standard AC wall outlet.
Only use the travel adapter that comes included with
the package.
nWarning
You must unplug the adapter before we remove the battery
from the phone during charging; otherwise, the phone could
be damaged.
➁
➀
➃➂
18
Getting Started
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing on the gray tabs on both sides of the
connector while pulling the connector out.
nNotice
]If your phone is powered on while charging, you’ll see the
bars in the battery indicator icon cycle.
When the battery is fully charged, the bars in the battery
indicator icon will flash on and off
]If your phone is powered off, the display will show the
charging status. ‘Charging’ or ‘Full’ will be displayed.
If the battery fails to charge completely:
]After turning the phone on and off, please attempt to
recharge the battery.
]After detaching and reattaching the battery, please
attempt to recharge the battery.
Turning Your Phone On and Off
1. Open the flip.
2. Hold down the key until the phone switches
on.
3. If the phone asks for a PIN, enter the PIN and press
the left soft key [OK]. For further details, see page 65.
The phone searches for your network and after finding
it, the idle screen, illustrated below, appears on both
displays. Now, you can make or receive a call.
nNote
The display language is preset to English at the factory.
To change the language, use the Languages menu option
(Menu 9.1.4). For further details, see page 62.
1
1
2
7:47PM 08 Jan
Menu Names
19
Getting Started
4. When you wish to switch the phone off, hold down
the key until the power-off image displays.
Access Codes
You can use the access codes described in this
section to avoid unauthorized use of your phone. The
access codes can be changed by using the Change
Codes feature (Menu 9.4.4).
Security code (4 to 8 digits)
The security code protects the unauthorized use of
your phone. The default security code is set to ‘0000’
and the security code is required to delete all phone
entries and to activate the Restore Factory Settings
menu. The security code default setting can be
modified from the Security Settings menu.
20
General Functions
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the area code. To
edit a number on the display screen, press the
right/left navigation keys to move the cursor to
desired position or simply press the key to
erase one digit at a time.
]
Press and hold the key to erase the entire
number.
3. Press the key to call the number.
4. When finished, press the key.
Making a Call by Send Key
1. Press the key, and the most recent incoming,
outgoing and missed phone numbers will be
displayed.
2. Select the desired number by using the navigation
key.
3. Press the key.
Making International Calls
1. Press and hold the key for the international
prefix. The ‘+’ character can be replaced with the
international access code.
2. Enter the country code, area code, and the phone
number.
3. Press the key.
Ending a Call
When you have finished a call, press the key.
Making a Call From the Contact List
You can store names and phone numbers dialed
frequently in the SIM card as well as the phone
memory known as the Contact List.
You can dial a number by simply looking up a name in
the contact list. For more details on the Contact List
feature, please refer to page 64.
21
General Functions
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the side keys of the phone. In idle mode
with the flip cover open, you can adjust the ring
volume using the side keys.
Answering a Call
When you receive a call, the phone rings and the
flashing phone icon appears on the screen. If the
caller can be identified, the caller’s phone number (or
name if stored in your Address Book) is displayed.
1. Open the flip and press the key or the left soft
key to answer an incoming call. If the Any Key menu
left soft key to answer an incoming call. If Any Key
has been set as the answer mode (Menu 9.3.2), any
key press will answer a call except for the key
or the right soft key.
nNotice
]
To reject an incoming call, press and hold the side keys
on the left side of the phone without opening the flip. If
you short press side keys, only the ringing tone is muted.
]
If Flip Open has been set as the Answer Mode (Menu
9.3.2), you do not need to press any key. You can answer
the call simply by opening the flip.
2. End the call by closing the phone or pressing the
key.
nNotice
You can answer a call while using the Address Book or other
menu features.
Vibrate Mode (Quick)
When the flip is opened, Vibrate Mode can be
activated by pressing and holding down key.
Signal Strength
If you are inside a building, being near a window may
give you better reception. You can see the strength of
your signal by the signal indicator ( ) on your
phone’s display screen.
Entering Text
You can enter alphanumeric characters by using the
phone’s keypad. For example, storing names in the
Address Book, writing a message, creating scheduling
events in the calendar all require entering text.
The following text input methods are available in the
phone.
22
General Functions
T9 Mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter. The T9 mode automatically compares
your keystrokes with an internal linguistic dictionary to
determine the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by pressing the
key labeled with the required letter once, twice, three
or four times until the letter is displayed.
123 Mode(Numbers Mode)
Type numbers using one keystroke per number. To
change to 123 mode in a text entry field, press key
until 123 mode is displayed.
Symbolic Mode
This mode allows you to enter special characters.
nNotice
You can select a different T9 language from the menu option.
The default setting on the phone is T9 disabled mode.
Changing the Text Input Mode
1. When you are in a field that allows characters to be
entered, you will notice the text input mode indicator
in the upper right corner of the display.
2. If you want to change modes, press and hold down
the key. The available modes are displayed.
Using the T9 Mode
The T9 predictive text input mode allows you to enter
words easily with a minimum number of key presses.
As you press each key, the phone begins to display the
characters that it thinks you are typing based on a
built-in dictionary. As new letters are added, the word
changes to reflect the most likely candidate from the
dictionary.
1. When you are in the T9 predictive text input mode,
start entering a word by pressing keys to
Press one key per letter.
]The word changes as letters are typed - ignore
what’s on the screen until the word is typed
completely.
]If the word is still incorrect after typing
completely, press the down navigation key once or
more to cycle through the other word options.
2
ABC
23
General Functions
Example: Press to type Good
Press [down navigation
key] to type Home
]If the desired word is missing from the word
choices list, add it by using the ABC mode.
2. Enter the whole word before editing or deleting any
keystrokes.
3. Complete each word with a space by pressing
the key.
To delete letters, press .
Press and hold down to erase entire words.
nNotice
To exit the text input mode without saving your input,
press . The phone returns to the previous menu level.
Using the ABC Mode
Use the to keys to enter your text.
1. Press the key labeled with the required letter:
]
Once for the first letter
]
Twice for the second letter
]
And so on
2. To insert a space, press the key once. To
delete letters, press the key. Press and hold
down the key to clear the display.
nNotice
Refer to the table below for more information on the
characters available using the keys.
2
ABC
Key Characters in the Order Display
Upper Case Lower Case
1. , - ¿ ? ¡ ! @ 1 . , - ¿ ? ¡ ! @ 1
2A B C Á Ã Ç 2 a b c á ã ç 2
3D E F É 3 d e f é 3
4G H I Í 4 g h i í 4
5J K L 5 j k l 5
6M N O Ó Ñ 6 m n o ó ñ 6
7P Q R S 7 p q r s 7
8T U V Ú Ü 8 t u v ú ü 8
9W X Y Z 9 w x y z 9
0Space Key Space Key
24
General Functions
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text
message such as a telephone number.
Press the keys corresponding to the required digits
before manually switching back to the appropriate text
entry mode.
Using the Symbol Mode
The Symbol Mode enables you to enter various
symbols or special characters.
To enter a symbol, press the key. Use the
navigation keys to select the desired symbol and press
the left soft key [OK].
25
Selecting Functions and Options
Your phone offers a set of functions that allow you to customize the phone. These functions are arranged in menus
and sub-menus, accessed via the two soft keys marked and . Each menu and sub-menu allows you to view
and alter the settings of a particular function.
The roles of the soft keys vary according to the current context; the label on the bottom line of the display just above
each key indicates its current role.
Press the left soft key to
access the available
Menu.
Press the right soft key
to access the available
Names.
7:47PM 08 Jan
Menu Names
26
Address Book
You can store phone numbers and their corresponding names in the memory of your SIM card.
In addition, you can store up to 255 numbers and names in the phone memory.
The SIM card and phone memory, although physically separate, are utilized like a single entity known as the Contact
List (See page 58 for details).
27
In-Call Menu
Your phone provides a number of control functions that
you can use during a call. To access these functions
during a call, press the right soft key [Options].
During a Call
The menu displayed on the handset screen during a
call is different than the default main menu displayed
when in idle screen, and the options are described
below.
Making a Second Call
You can get a number you wish to dial from the
Address Book to make a second call. Press the right
soft key then select Contact List.
Swapping Between Two Calls
To switch between two calls, press the right soft key
and select Swap, or key.
Answering an Incoming Call
To answer an incoming call when the handset is
ringing, simply press the key. The handset is also
able to notify you of an incoming call while you are
already on a call. A tone sounds in the earpiece, and
the display will show that a second call is waiting. This
feature, known as Call Waiting, is only available if your
network supports it. For details of how to activate and
deactivate it see Call Waiting (Menu 9.3.4).
If Call Waiting is on, you can put the first call on hold
and answer the second, by pressing . You can
end the current call and answer the waiting call by
pressing the left soft key and then selecting Active call
menu of End call.
Rejecting an Incoming Call
You can reject an incoming call without answering by
simply pressing the key.
During a call, you can reject an incoming call by
pressing the right soft key, which is the [Menu] key and
selecting the Reject call or by pressing the key.
Muting the Microphone
You can mute the microphone during a call by pressing
the right soft key [Mute]. The handset can be unmuted
by pressing the Unmute menu or right soft key
[Unmute]. When the handset is muted, the caller
cannot hear you, but you can still hear them.
28
In-Call Menu
Multiparty or Conference Calls
The multiparty or conference service provides you
with the ability to have a simultaneous conversation
with more than one caller, if your network service
provider supports this feature. A multiparty call can
only be set up when you have one active call and one
call on hold, both calls having been answered. Once a
multiparty call is set up, calls may be added,
disconnected or separated (that is, removed from the
multiparty call but still connected to you) by the person
who set up the multiparty call. These options are all
available from the In-Call menu. The maximum callers
in a multiparty call are five. Once started, you are in
control of the multiparty call, and only you can add
calls to the multiparty call.
Making a Second Call
You can make a second call while currently on a call.
Enter the second number and press the . When
the second call is connected, the first call is
automatically placed on hold. You can swap between
calls, by pressing the key.
Setting Up a Conference Call
To set up a conference call, place one call on hold and
while the active call is on, press the right soft key and
then select the Join menu of Conference call.
Activate the Conference Call on Hold
To activate a conference call on hold, press the left
soft key, and then press the key.
Adding Calls to the Conference Call
To add a call to an existing conference call, press the
right soft key, and then select the Join menu of
Conference call.
Private Call in a Conference Call
To have a private call with one caller from a
conference call, display the number of the caller you
wish to talk to on the screen, then press the right soft
key. Select the Private menu of Conference call to put
all the other callers on hold.
Ending a Conference Call
Currently displayed caller from a conference call can
be disconnected by pressing the key.
29
Menu Tree
The following illustration shows the available menu structure and indicates the:
]Number assigned to each menu option.
]Page where you can find the feature description.
1. Audio (see page 33)
1.1 Ringtones
1.2 Volume
1.3 Ring Alert Type
1.4 Message Alert Tones
1.5 Key Tones
2. Messaging (see page 34)
2.1 New Message
2.2 Inbox
2.3 Drafts
2.4 Outbox
2.5 Sent
2.6 Listen Voicemail
2.7 Info Service
2.8 Templates
2.8.1 Text
2.8.2 Multimedia
2.8.3 Business Card
2.9 Settings
2.0 Check Memory
3. Web Access (see page 41)
3.1 Home
3.2 Favorites
3.3 Go To URL
3.4 Network Profile
3.5 Cache Settings
3.5.1 Clear Cache
3.5.2 Allow Cache
3.6 Security Certificates
3.7 Information
4. Games & Apps (see page 44)
4.1 Games & Apps
4.2 Favorites
4.3 Information
4.3.1 Check Memory
4.3.2 Java Version
30
Menu Tree
5. My Folder (see page 46)
5.1 Favorites
5.2 Games & Apps
5.3 Audio
5.4 Graphics
5.5 Multimedia
6. Recent Calls (see page 48)
6.1 Missed Calls
6.2 Dialed Calls
6.3 Received Calls
6.4 Delete Recent Calls
6.5 Call Duration
6.5.1 Last Call
6.5.2 Dialed Calls
6.5.3 Received Calls
6.5.4 All Calls
6.6 Call Costs
6.6.1 Last Call
6.6.2 All Calls
6. Recent Calls (continued)
6.7 Cost Settings
6.7.1 Call Cost's Limit
6.7.2 Set Tariff
6.7.3 Auto Display
6.8 Data Information
6.8.1 Web Data
6.8.2 Data Call
6.8.3 Total Data
7. Tools (see page 51)
7.1 Alarm Clock
7.2 Calendar
7.3 Voice Memo
7.4 Calculator
7.5 Notepad
7.6 World Clock
7.7 Unit Converter
7.8 Tip Calculator
7.9 Stopwatch
31
Menu Tree
8. Address Book (see page 56)
8.1 Contacts
8.2 New Contact
8.3 Speed Dial List
8.4 Caller Groups
8.5 Copy All Contacts
8.5.1 SIM To Phone
8.5.2 Phone To SIM
8.6 Delete All Contacts
8.7 Settings
8.7.1 Set Memory
8.7.2 Set View Detail
8.8 Information
8.8.1 Service Dial Number
8.8.2 Check Memory
8.8.3 My Number
9. Settings (see page 60)
9.1 Display
9.1.1 Wallpaper
9.1.2 Backlight Timer
9.1.3 Contrast
9.1.4 Languages
9.1.5 LED Indicator
9.2 Date & Time
9.2.1 Set Date
9.2.2 Date Format
9.2.3 Set Time
9.2.4 Time Format
9.3 Call
9.3.1 Call Forwarding
9.3.2 Answer Mode
9.3.3 Send My Number
9.3.4 Call Waiting
9.3.5 Minute Minder
9.3.6 Auto Redial
9.3.7 Closed User Group
9.3.8 Send DTMF
32
Menu Tree
9. Settings (continued)
9.4 Security
9.4.1 PIN Code Request
9.4.2 Call Barring Services
9.4.3 Fixed Dial Number
9.4.4 Change Codes
9.5 Connection
9.5.1 Network Selection
9.5.2 Change Frequency Band
9.5.3 GPRS Attach
9.5.4 Network Profile
9.5.5 Reset Network Profile
9.6 Reset Default
33
Audio
You can use the Sound Settings feature to customize
various settings, such as the:
]Ring melody, volume and type
]Sounds made when you press a key, make an error
or receive a message
Ringtones Menu 1.1
This option allows you to select the required ring
melody. You can choose between many different
melodies. If you have downloaded any sounds from the
Internet or received any ring tone messages, you can
view the list in this menu.
Volume Menu 1.2
]Ringtone: To set the volume level for the ringing
tones.
]Key Tone: To set the volume level for keypad tones.
]Power On Tone: To set the volume level for power
on tones.
]Earpiece: This can adjust the volume level.
]Headset: When using the Ear Mic, volume level can
be adjusted.
Ring Alert Type Menu 1.3
You can select an option from Ring, Ring and Vibrate
and Ring after Vibrate.
Message Alert Tones Menu 1.4
Select the alert tone for messages.
Key Tones Menu 1.5
This menu option allows you to select a tone that the
phone sounds when you press a key. You can select
an option from Beep and Voice.
34
Messaging
New Message Menu 2.1
Text (Menu 2.1.1)
You can write and edit text messages of up to 918
characters.
1. Type in a message using key presses. For details on
how to enter text, refer to page 21 (Entering Text).
2. After completing the message select the required
option by pressing the right soft key [Options].
The following options are available.
]Send To Number: Enter the phone number or select
the number from the address book.
]Save To Drafts: Save the message so that it can be
sent later.
]Set T9: Choose between English or Spanish T9
language. For details on how to enter text, refer to
page 22 (Using the T9 Mode).
]Clear Text: Deletes the written message.
]Cancel: Exit the text editor.
The following options are available. (Press the left soft
key [Insert])
]Symbol: Attach special characters.
]Picture: Send and receive text messages that
contain pictures, known as Enhanced Messaging
Service. Several preset pictures are available in the
phone and they can be replaced with new ones
received from other sources.
]Animation: Attaching an animation in a message
can be done through EMS(Enhanced Messaging
Service).
]Audio: Attach sounds that are available for short
message.
]Text Template: Use the text templates already set in
the phone.
]Contact: Attach a phone number.
]Business Card: Attach your name card.
35
Messaging
Multimedia (Menu 2.1.2)
The following options are available.
You can write and edit multimedia messages, checking
message size.
1. Enter the Messaging menu by pressing the [OK].
2. If you want to write a multimedia message, select
Multimedia.
3. You can create a new message or choose one of the
multimedia message templates already made.
4. Press Insert to add Symbol, Graphic, Sound, New
Slide, Text Templates, Contact or Business card.
Options
]Send: You can send multimedia messages to multiple
recipients, prioritize your message, and make it sent
later as well.
nNote
All messages will be automatically saved in the outbox
folder, even after a sending failure.
]Preview: You can preview multimedia messages you
wrote.
]Save: You can save multimedia messages To Drafts
or As Template.
]Move to: You can move to previous or next slide.
]Delete Slide: You can delete current slide.
]Delete Media: You can deletes the current media.
]Set timer: You can set timer for slide, text, picture
and sound.
]Set T9: Select a T9 input mode.
]Cancel: You can back to the Message menu.
nNote
If you select the photo on writing multimedia message,
loading duration will take about 5 seconds. At that time, you
can’t activate any key during loading time. After that time, it
is available to write multimedia message.
36
Messaging
Inbox Menu 2.2
You will be alerted when you have received messages.
They will be stored in the Inbox. In the Inbox, you can
identify each message by icons. For detail, see the
icon directive below.
If the phone has ‘no space for message’, you can make
space in each repository by deleting messages, media
and applications.
]Delete: Deletes the selected message from the
Inbox.
]Forward: Forwards a received message to other
recipients. After recipients are entered, the message
can be forwarded.
]Extract: Extract picture, sound, text webpage and
email address from the message.
]Return Call: Call back the sender.
Drafts Menu 2.3
You can view the messages saved as a draft. The draft
messages are listed with the date and time when they
were saved.
The following options are available.
]Delete: Deletes the message you choose.
]Delete all: Deletes all messages in the folder.
Outbox Menu 2.4
When you press the Send, the message moves to the
Outbox and from there the message is sent. If the
message fails to be sent from the Outbox, another
attempt will be made. After two attempts the message
will no longer be sent automatically. In order to send
the message that has failed twice, you must either
press the Send from the Options menu or simply turn
off and on the phone which will trigger the automatic
sending of the failed message.
37
Messaging
Sent Menu 2.5
Allows you to see sent messages here. For sent
message, you can see the delivery status.
]Delete: Deletes the selected message from the Sent.
]Forward: Forwards the current message to other
recipients.
]Delete all: Deletes all the messages from the Sent.
Listen Voicemail Menu 2.6
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
Before using this feature, you must enter the voice
server number obtained from your service provider.
When new voicemail is received, the symbol will be
displayed on the screen. Please check with your
network service provider for details of their service in
order to configure the handset accordingly.
Info Service Menu 2.7
Templates Menu 2.8
There are 6 predefined messages in the list. You can
view and edit the template messages or create new
messages.
Text (Menu 2.8.1)
• Please call me back • I’m late. I will be there at
• Where are you now? • I’m on the way.
• Urgent! Please contact. • I love you
The following options are available.
]Edit: Allows you to write a new message or edit the
selected template message.
]Send Via
• Text Messages: Sends the selected template
message by SMS.
• Multimedia Messages: Sends the selected
template message by MMS.
]Delete: Allows you to delete the selected template
message.
38
Messaging
Multimedia (Menu 2.8.2)
For further details, see page 37.
• Send: Support multiple number and email addresses.
• Preview: To see the multimedia message you wrote.
• Save: Allows you to save multimedia messages in
draft or as templates.
• Delete: Deletes the MMS message.
• Slide Duration: Allows you to set timer for slide and
text.
• Slide Format: Allows you to make the message
contents aligned right, left, top and bottom.
• Add Slide: Allows you to add a slide before or after
current slide.
• Remove Slide: Deletes the selected slide.
• Add Image: Allows you to add a image before or after
current image.
• Add Sound: Allows you to add a sound before or after
current sound.
• Delete Image: Deletes the current image.
• Delete Sound: Deletes the current sound.
Business Card (Menu 2.8.3)
This option allows you to make your own name card.
Key in the Name, Mobile number, Office number,Fax
number and E-mail address.
]Send Via
• Text Messages: Sends the selected name card by
SMS.
• Multimedia Messages: Sends the selected name
card by MMS.
]Delete: Allows you to delete the selected name card.
Settings Menu 2.9
Text Messages (Menu 2.9.1)
]Message Center Number: Allows you to store or
change the number of your email gateway required
when sending text messages. You must obtain this
number from your service provider.
]Subject: If you set it to on, allows you to enter the
subject.
39
Messaging
]Bearer Setting: You can select GPRS or GSM.
Contact your network operator or service provider
for information related to setting a selected bearer,
pricing and connection speed.
GSM Preferred/GPRS Preferred
MMS Messages (Menu 2.9.2)
Via this menu, you can set up default multimedia
message information.
The following options are available:
]Subject: Enter the message title.
]Slide Duration: Display the duration of each page
when writing the message.
]Priority: You can set the priority of the message you
choose.
]Validity Period: Set the duration for keeping
messages on the network server.
]Delivery Reports: If it is set to Yes in this menu, you
can check whether your message is sent
successfully.
]Read Receipts: This menu allows you to determine
whether to request a read confirmation mail to a
recipient.
]Auto Download
• On: If you select this, messages are downloaded
automatically on receipt.
• Off: Defers downloading messages.
]Network Profile: For further details, see page 52.
Voice Mailbox Number (Menu 2.9.3)
Allows you to change the voice mail server number, if
necessary.
nNote
Voice Mail is a network feature. Please contact your service
provider for further details.
Download Messages (Menu 2.8.4)
]Receive: You can set the option whether you will
receive the message or not.
40
Messaging
Check Memory Menu 2.0
You can check the current memory status of each
memory for Text and Multimedia.
41
Web Access
You can access various WAP (Wireless Application
Protocol) services such as banking, news, weather
reports, and flight information. These services are
specially designed for mobile phones and they are
maintained by the WAP service providers.
Check the availability of WAP services, pricing and
tariffs with your network operator and/or the service
provider whose service you wish to use. Service
providers will also give you instructions on how to use
their services.
To launch the browser in standby mode, press and
hold down the key.
Once connected, the homepage is displayed. The
content depends on the service provider.
You can open any WWW page by entering its URL
address.
To exit the browser at any time, press the key.
The idle screen is displayed.
Navigating with the WAP Browser
You can surf the Internet using either the phone keys
or the WAP Browser menu.
Using the Phone Keys
When surfing the Internet, the phone keys function
differently from the phone mode.
Using the WAP Browser Menu
There are various menu options available when surfing
the Wireless Web.
nNote
The WAP Browser menus may vary, depending on your
version of the browser.
Key Description
up/down navigation key Scroll each line of the
content area
42
Home Menu 3.1
Connect to a homepage. The homepage may be the
site which is defined in the activated profile. It will be
defined by the Service Provider if you have not defined
it in the activated profile.
Favorites Menu 3.2
Your phone may have some pre-installed bookmarks
for sites not affiliated with LG. LG does not warrant or
endorse these sites. If you choose to access them, you
should take the same precautions, for security or
content, as you would with any site.
Options in the Favorites view
• Connect: Connect to the URL address to download
the ringtone.
• View: View the URL address of the Favorites.
• Delete: Delete the URL address.
• Edit: Modify the Favorites.
• Move to Folder: Move the Favorites to other folder.
• New Favorite: Create new favorites in current
folder.
• New Folder: Create new sub-folder.
• Send URL: Allows the stored URL under Favorites
to be sent via SMS to another person.
• Delete All: Allows you to erase all favorites.
Go To URL Menu 3.3
You can directly connect to the site you want. You
need to enter a specific URL.
Network Profile Menu 3.4
A Profile is the network information used to connect to
the internet.
]Activate: Set a current profile as a default.
]Settings: Edit the various items of the current profile.
]Rename: Revise the name of profile.
]New Network Profile: Create a new profile.
]Delete: Delete the profile.
]Delete All: Allows all Profiles within the Access
Point to be deleted so please take precaution prior
to using this option.
Web Access
43
Web Access
nNote
The changes using these options may affect the other
application function.
Cache Settings Menu 3.5
The information or services you have accessed are
stored in the cache memory of the phone.
Clear Cache (Menu 3.5.1)
Remove all contexts saved in cache.
Allow Cache (Menu 3.5.2)
Set a value whether a connection attempt is made
through cache or not.
nNote
A cache is a buffer memory, which is used to store data
temporarily.
Security Certificates Menu 3.6
A list of the available certificates is shown.
Information Menu 3.7
The WAP Browser version is displayed.
Games & Apps
44
Java is a technology developed by Sun Microsystems.
Similar to the way you would download the Java
Applet using the standard Netscape or MS Internet
Explorer browsers, Java MIDIet can be downloaded
using the WAP enabled phone. Depending on the
service provider, all Java based programs such as
Java games can be downloaded and run on a phone.
Once downloaded, the Java program can be viewed
within the Games & Apps menu where you can select,
execute or delete. The Java program files saved in the
phone are in .JAD and .JAR formats.
nNote
The JAR file is a compressed format of the Java program
and the JAD file is a description file that includes all detailed
information. From the network, prior to download, you can
view all detailed file descriptions from the JAD file.
nWarning
Only J2ME (Java 2 Micro Edition) based programs will run in
a phone environment.
The J2SE (Java 2 Standard Edition) based programs will only
run in a PC environment.
Games & Apps Menu 4.1
Games & Apps menu displays the list of Java programs
downloaded using the WAP. All previous downloaded
programs can be selected, deleted or viewed in detail
within the Games & Apps menu.
Favorites Menu 4.2
When a new Java program is downloaded using the
WAP, the address from which a download takes place
is known as a bookmark. The Java menu includes a
bookmark list for downloading Java programs and this
bookmark list can be viewed from the Favorites menu.
]Connect: Selected address in the bookmark is used for
data connection. After successful connection, desired
Java program can be downloaded from the list.
]View: Detailed information on a bookmark can be
viewed such as name of bookmark and address of
bookmark.
]Delete: Selected bookmark is deleted. Deleted
bookmark cannot be restored so caution is required
when deleting bookmarks.
45
]Edit: Selected bookmark can be edited. Editing a
bookmark is done in the order of URL →Title →
Profile(Access Point) →User ID →Password. When
creating a new bookmark, same order is followed.
The service provider can require user ID and
password information, but if none is provided, no
input is necessary.
]Add Favorite: New bookmark is added. If there is no
Favorites, you get a display indicating that there is
no Favorites.
]Send URL: Selected bookmark URL can be sent via
SMS.
]Delete All: This deletes all of the selected bookmark
as well as the bookmarks directory within the
Games & Apps menu.
nNote
After selecting the Connect function to access the Java
MIDlet Provider’s server, you may choose one of many Java
programs to download and install into your phone. Once
connected to the server, the Go button can be pressed to
view the JAD information on a desired program. The Get
button will begin the download and install process. The
download and install process will take place simultaneously
and once download is complete you can immediately run the
Java program. The installed Java program can be selected
to run at a later time from the Games & Apps menu.
Information Menu 4.3
The downloaded programs using the WAP are stored
in the phone memory. There is a maximum memory
capacity in a phone and once you exceed this memory,
you will not be able to store any more programs. The
View Information menu allows you to check the
available memory capacity in a phone.
Check Memory (Menu 4.3.1)
Displays maximum memory capacity and total
available memory information.
Java Version (Menu 4.3.2)
Displays current Java version.
Games & Apps
My Folder
46
Favorites Menu 5.1
Your phone may have some pre-installed bookmarks
for sites not affiliated with LG. LG does not warrant or
endorse these sites. If you choose to access them, you
should take the same precautions, for security or
content, as you would with any site. For further details,
see page 45.
Games & Apps Menu 5.2
For further details, see page 47 (Menu 4.1).
Audio Menu 5.3
The right soft key [Options] will bring up the following
options.
]Send Via Text Message: Downloaded Sound can be
sent via SMS.
]Set As Ring Tone: This sets the Ring Tone with
currently selected Sound.
]Delete: This deletes currently selected Sound.
]Rename: This deletes the Title of currently selected
Sound.
]Delete All: This deletes all sounds.
nNote
Sounds supplied as default can only be used under the Set
As Ring Tone mode.
Graphics Menu 5.4
The right soft key [Options] will bring up the following
options.
]Set As Wallpaper: Currently selected Picture can be
set as a Wallpaper.
]Delete: Currently selected Picture can be deleted.
]Rename: Title of currently selected Picture can be
edited.
]Delete All: All Pictures can be deleted.
nNote
Pictures supplied as default can only be used under the Set
As Wallpaper mode.
47
Multimedia Menu 5.5
The right soft key [Options] will bring up the following
options.
]Set As Wallpaper: Currently selected Animation can
be set as a Wallpaper.
]Delete: Currently selected Animation can be
deleted.
]Edit Title: Title of currently selected Animation can
be edited.
]Delete All: All Animations can be deleted.
My Folder
48
Recent Calls
You can check the record of missed, received, and
dialed calls only if the network supports the Calling
Line Identification (CLI) within the service area.
The number and name (if available) are displayed
together with the date and time at which the call was
made. You can also view call times.
Missed Calls Menu 6.1
This option lets you view the last 10 unanswered calls.
You can also:
• View the number if available and call it, or save it in
the Address Book
• Enter a new name for the number and save both in
the Address Book
• Send a message by this number
• Delete the call from the list
Dialed Calls Menu 6.2
This option lets you view the last 20 outgoing calls
(called or attempted). You can also:
• View the number if available and call it or save it in
the Address Book
• Enter new name for the number and save both in the
Address Book
• Send a message by this number
• Delete the call from the list
Received Calls Menu 6.3
This option lets you view the last 20 incoming calls.
You can also:
• View the number if available and call it, or save it in
the Address Book
• Enter a new name for the number and save both in
the Address Book
• Send a message by this number
• Delete the call from the list
Delete Recent Calls Menu 6.4
Allows you to delete Missed, Received and Dialed
calls lists. You can delete all call lists at one time.
49
Recent Calls
Call Duration Menu 6.5
Allows you to view the duration of your incoming and
outgoing calls. You can also reset the call times. The
following timers are available:
Last Call (Menu 6.5.1)
Length of the last call.
Dialed Calls (Menu 6.5.2)
Length of the outgoing calls.
Received Calls (Menu 6.5.3)
Length of the incoming calls.
All Calls (Menu 6.5.4)
Total length of all calls made and incoming calls since
the timer was last reset.
nNotice
The actual time invoiced for calls by your service provider
may vary, depending upon network features, rounding-off for
billing, and so forth.
Call Costs Menu 6.6
Call costs allows you to check the cost of the last call
or all calls. The call costs are displayed separately for
each SIM card. To reset the cost, you need the PIN2
code.
The following options are available:
Last Call (Menu 6.6.1)
Cost of the last call made.
All Calls (Menu 6.6.2)
Total cost of all calls made since the cost counter was
last reset. If the total cost exceeds the maximum cost
set, you will no longer be able to make any calls,
except calls to the emergency services, until you reset
the counter.
nNotice
The actual cost invoiced for calls by your service provider
may vary, depending upon network features, rounding-off for
billing, tax, and so forth.
50
Recent Calls
Cost Settings Menu 6.7
Call Cost’s Limit (Menu 6.7.1)
This network service allows you to limit the cost of
your calls by selected charging units. If you select
Read, the number of remaining unit is shown. If you
select Edit, you can change your charge limit.
Set Tariff (Menu 6.7.2)
You can set the currency type and the unit price.
Contact your service providers to obtain charging unit
prices. To select the Set in this menu, you need the
PIN2 code.
nNote
When all units have been used, no calls can be made except
emergency calls. Depending on the SIM card, you need the
PIN2 code to set a call cost limit.
Auto Display (Menu 6.7.3)
This network service allows you to see automatically
the cost of your last calls.
Data Information Menu 6.8
You can check the amount of data transferred over the
network through the GPRS information option. In
addition, you can also view how much time you are
online.
nNotice
GPRS General Packet Radio Service
Web Data (Menu 6.8.1)
You can check the data volume and the duration
through WAP.
Data Call (Menu 6.8.2)
You can check the data volume and the duration
through GPRS by using an external device such as a
serial port.
Total Data (Menu 6.8.3)
You can check the total amount of data through WAP
and an external device.
51
Tools
Alarm Clock Menu 7.1
Set the alarm to ring at a specific time. In the Alarm
Clock menu, the following options are available:
On: Set the time(hour and minute) for activating the
alarm.
1. Enter the menu.
2. Select [On] by pressing the right/left navigation keys.
3. If you want to set the time for activating the alarm,
press the down navigation key.
4. Enter the required time, press the down navigation
key.
5. The following options are available.
• Once: The alarm rings only once and is then
deactivated.
• Daily: The alarm rings every day at the same time.
• Weekly: The alarm rings every week on the same
day and at the same time.
• Monthly: The alarm rings every month on the same
day and at the same time.
6. Allows you to select the alarm melody by using the
right/left navigation keys.
7. Press the left soft key [Save].
Off: Cancel the alarm.
nNotice
If this option is set to On, the alarm will ring at the specified
time, even when the phone is switched off.
To stop the alarm when it rings, open the phone and press
the right soft key[Quit].
Calendar Menu 7.2
When you enter this menu a calendar will be
displayed. Top of the screen indicates sections for
date. Square cursor is used to locate a particular day.
The under bar on the calendar indicates a schedule or
memo on that day. This function helps to remind you of
the schedule and memo. The phone will sound an
alarm tone if it has been set for a specific note.
nNote
Your phone should be switched on to use this function.
]View: Press the right soft key [Options] to delete or
edit the note you selected.
]Edit: Allows you to edit the schedule.
]Delete: Allows you to delete the schedule.
52
]New Schedule: You can edit maximum of 30
characters and create up to 30 notes.
]Calendar: Allows you to consult the calendar.
]Scheduler Tone: The phone can sound an alarm
tone when the scheduled date for an event has
been reached with this option.
]View All Schedules: Shows the notes that are set
for all days. Use the up/down navigation keys to
browse through the note lists. You can use the menu
by press the right soft key [Options].
]Go To Date: Allows you to jump to a specific date.
]Delete Old: Delete past schedule event that has
already been notified.
]Delete All: Delete all schedules. You are asked to
confirm your action.
nNote
You can see Edit, Delete,View all schedules, Delete Old, and
Delete all menus dependent on setting of the schedule.
Voice Memo Menu 7.3
Allows you to record a memo. You can record up to 10
voice messages with each message up to 10 seconds.
You can use the Voice Memo feature to:
• Play the recorded voice memos
• Delete one or all voice memos
1. Once recording is started, the message
‘Recording...‘ and the remaining time is displayed.
nNote
If all memo locations are full, you must delete an old memo
before recording a new one.
2. If you want to finish recording, press the left soft key
[Save].
]Play: Allows you to play back all memos recorded,
starting with the most recent memo. The screen
displays the date and time when the memo was
recorded.
]Delete: Allows you to delete a specific memo. All
memos recorded are played back, starting with the
most recent one.
]Record New: Allows you to record a memo.
Tools
53
Tools
]Rename: Allows you to rename a specific memo.
]Send via Multimedia Message: Sends the selected
voice memo by MMS.
]Delete All: Allows you to delete all memos.
Calculator Menu 7.4
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Use the navigation keys to select a sign for
calculation.
nNote
To include a decimal point, press the key.
3. To calculate the result, press the key.
Notepad Menu 7.5
To write, edit and delete a memo on a specific date,
proceed as follows.
1. Press the left soft key [New].
2. Input the memo and press the right soft key
[Options].
The following options are available.
]Set T9: Allows you to select the T9 language to use
in memo.
]Exit Editor: Allows you to exit in memo editor.
Or
1. Select a memo.
2. Press the right soft key [Options].
The following options are available.
]Delete: Allows you to delete the memo. You can
press the right soft key [Options →Delete] to delete
the memo displayed.
]Add New: Add a new memo, up to 20 memos and 40
characters per each memo.
54
Tools
]Edit: If you select a memo that already exists, you
can press the right soft key [Options →Edit] to edit
the memo displayed.
]Delete All: Allows you to delete all memos. You are
asked to confirm your action.
World Clock Menu 7.6
Allows you to check the current Greenwich Mean
Time(GMT) and 72 major cities around the world, using
the left/right navigation keys.
The screen shows the city name, current date and
time.
To select the time zone in which you are located,
proceed as follows:
1. Select the city corresponding to your time zone by
pressing the left/right navigation keys one or more
times. The local date and time are displayed.
2. If you want to set, press the left soft key.
4. If you want to set Daylight Savings, press the right
soft key [DST].
nNote
The time zone setting of each city in World time menu may
be affected by network condition.
Unit Converter Menu 7.7
This converts any measurement into a unit you want.
There are 4 types that can be converted into units:
Length, Surface, Weight, and Volume.
1. You can select one of four unit types by pressing the
left soft key [Unit].
2. Select the standard value by using the left/right
navigation keys.
3. Select the unit you want to convert by pressing the
up/down navigation keys.
4. You can check the converted value for the unit you
want. Also, you can input a decimal number by
pressing the key.
55
Tools
Tip Calculator Menu 7.8
Allows you to quickly and easily calculate the amounts
for a bill with the amount of the bill, the amount of the
tip and the number of people as variables.
Stopwatch Menu 7.9
1. Select Stopwatch menu.
2. Press [Start] to start the stopwatch.
3. Press [Stop] to stop the stopwatch and view the
measured duration of time.
4. Press [Continue] to resume the stopwatch.
5. Press [Lap] during operation to record the duration
of time at the moment, and continue the stopwatch.
6. Users can save up to 20 time records by pressing
[Lap]. If the number of recorded time exceeds 20, the
warning message "List Full" will be displayed.
7. Press [Reset] to clear all recordings of time, and
reset the stopwatch.
56
Address Book
You can store phone numbers and their corresponding
names in the memory of your SIM card. In addition,
you can store up to 255 numbers and names in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they were
a single entity, called the Address Book.
Contacts Menu 8.1
1. When the idle screen is displayed, press the right
soft key [Names].
2. Press the left soft key [OK].
nNote
You can also scroll through the Address Book from the
beginning, in idle mode with the flip cover open, by pressing
the down navigation key directly.
3. If you want to edit, delete, copy an entry, select
[Options].
4. Once you have found the required entry, press the
to dial the number.
• Delete: You can delete an entry.
• New Contact: You can add a new contact entry.
• New Message: You can write a short message and a
multmedia message. For further details, see page 34.
• Copy To Phone: You can copy an entry from SIM to
Phone.
•
Copy To SIM: You can copy an entry from Phone to SIM.
• Main Number: You can select the main number out of
your mobile, home or office numbers. Choose the one
that is most often used. The main number will be
displayed first, if you set this.
New Contact Menu 8.2
You can add a address book entry by using this function.
Phone memory capacity is 255 entries. SIM card memory
capacity depends on the cellular service provider. You
can also save 20 characters of name in the phone
memory, and save characters in the SIM card. The
number of characters is dependent on the SIM.
1. Open the Address Book first by pressing the right
soft key [Names] in standby mode.
2. Scroll to highlight New Contact, and press the left
soft key [OK].
3. You can add new Address book entries to SIM
memory or the Address book memory. To select the
memory, go to Set memory (Menu 8.7.1). (Refer to
page 60.)
57
Address Book
• Adding new entries into SIM memory
You can enter a name and number, and select the
required group. (Depends on the SIM)
• Adding new entries into phone memory
You can enter a name, numbers, E-mail address and
memo, and select the required group.
Speed Dial List Menu 8.3
You can assign any of the keys, to with a
name list entry. You can call directly by pressing this
key for 2-3 seconds.
1. Open the Address Book first by pressing the right
soft key [Names] in a standby mode.
2. Scroll to Speed Dial List, then press the left soft key
[OK].
3. If you want to add a number to speed dial, select
<Empty>. Then, you can search the name from the
Address Book.
4. Select the name from the Speed Dial Entry. You can
change and delete the name. In addition, you can
call by this number, write text message, and
multimedia message.
Caller Groups Menu 8.4
There are 6 predefined groups as well as one
additional group labeled Others where you can create
your own lists.
1. You can set the phone to ring in a specific way and
display a preselected graphic icon when a particular
person calls you.
2. Scroll to Caller Groups then press the left soft key
[Ok] to enter this menu.
3. Every Group list will be displayed : Family, VIP,
Friends, Colleague, Group 1, Group 2, Others.
4. Select the Group name that you want to manage by
pressing the right soft key [Options].
5. You will see the following submenus under the
predefined groups except for the Others.
• Group Ring Tone: Allows you to select the ring tone
to be used when you receive a voice phone call
from a person in the group.
• Group Icon: Allows you to select the graphic icon
to be displayed when you receive a call from a
person in the group.
2
ABC
58
Address Book
• Add Member: Allows you to add the member to the
group.
• Remove Member: Allows you to delete the member
in the group.
• Rename: Allows you to assign a name to the group.
Copy All Contacts Menu 8.5
You can copy or move entries from the SIM card
memory to the phone memory and vice versa.
SIM To Phone (Menu 8.5.1)
You can copy the entry from the SIM card to phone
memory.
Phone To SIM (Menu 8.5.2)
You can copy the entry from the phone memory to the
SIM card.
The following options are available:
]Keep Original: When copying, the original dial
numbers are kept.
]Delete Original: When copying, the original dial
numbers will be erased.
Delete All Contacts Menu 8.6
You can delete all entries in the SIM and Phone. This
function requires the security code.
Press the key to return to the standby mode.
Settings Menu 8.7
Set Memory (Menu 8.7.1)
Scroll to highlight the Set Memory option, then press
the left soft key [Ok].
]If you select Ask Always when adding entry, the
phone will ask where to store.
]If you select SIM or Phone, the phone will store an
entry to the SIM or the phone.
Set View Detail (Menu 8.7.2)
]If you select On, you can view the information of
each member in details (Menu 8.1).
]If you select Off, you can view only name of each
member (Menu 8.1).
59
Address Book
Information Menu 8.8
Service Dial Number (Menu 8.8.1)
You can view the list of Service Dialing Numbers (SDN)
assigned by your network provider(If supported by the
SIM card). Such numbers include the emergency,
directory assistance and voice mail numbers.
1. Select the Service dial number option.
2. The names of the available services will be shown.
3. Use the up/down navigation keys to select a service.
Press the key.
Check Memory (Menu 8.8.2)
You can check how many names and numbers are
stored in the Address Book (SIM card and phone
memories).
My Number (Menu 8.8.3)
Allows you to display your phone number in the SIM
card.
60
Settings
Display Menu 9.1
You can change the background image and the display
style for Menu Mode according to your preference.
Wallpaper (Menu 9.1.1)
This option allows you to change the background
image (wallpaper) to be displayed in idle mode.
To change the background image, proceed as follows.
1. Scroll through the list by pressing the left or right
navigation key.
You have various preset images available. You can
also select the blank background and any images
downloaded from the Internet.
2. Press the left soft key [Select] when the required
image is highlighted. The selected image is
displayed.
Backlight Timer (Menu 9.1.2)
You can select whether or not the phone uses the
backlight. A marginal increase in the standby/talk time
can be achieved by turning the backlight off.
It turns off if no key is pressed within one minute.
• 5 Seconds turns the backlight off 5 seconds after
the last key was pressed.
• 10 Seconds turns the backlight off 10 seconds
after the last key was pressed.
• 30 Seconds turns the backlight off 30 seconds
after the last key was pressed.
• 60 Seconds turns the backlight off 60 seconds
after the last key was pressed.
• 180 Seconds turns the backlight off 180 seconds
after the last key was pressed.
Contrast (Menu 9.1.3)
This option allows you to adjust the contrast of the LCD
screen by pressing the navigation key.
Languages (Menu 9.1.4)
You can select the display language. When the
language option is set to Automatic, the language is
automatically selected according to the language of
the SIM card used. English will be set if the language
on the SIM card is not supported in the phone.
61
Settings
LED Indicator (Menu 9.1.5)
This option allows you to select whether or not the
service light on the top of the phone is used.
]Enable: The service light flashes when the phone is
ready for use.
]Disable: The service light is not used.
Date & Time Menu 9.2
Set Date (Menu 9.2.1)
Allows you to enter the day, month and year. You can
change the date format via the Date Format menu
option.
Format: Allows you to change the time and date formats.
Date Format (Menu 9.2.2)
YYYY/MM/DD(year/month/day)
DD/MM/YYYY(day/month/year)
MM/DD/YYYY(month/day/year)
Set Time (Menu 9.2.3)
Allows you to enter the current time. You can choose
the time format via the Time Format menu option.
Time Format (Menu 9.2.4)
24 Hours/12 Hours
Call Menu 9.3
To change the settings for call diverting:
Call Forwarding (Menu 9.3.1)
When this network service is activated, you can direct
your incoming calls to another number, for example, to
your voice mailbox number. For details, contact your
service provider. Select one of the divert options, for
example, select If Busy to divert voice calls when your
number is busy or when you reject incoming calls.
The following options are available:
]All Voice Calls: Diverts voice calls unconditionally.
]If Busy: Diverts voice calls when the phone is in use.
]If No Reply: Diverts voice calls which you do not
answer.
]If Out Of Reach: Diverts voice calls when the phone
is switched off or out of coverage.
]All Data Calls: Diverts to a number with a PC
connection unconditionally.
62
Settings
]All Fax Calls: Diverts to a number with a fax
connection unconditionally.
• Activate: Activates the corresponding service.
- To Other Number: Inputs the number for diverting.
- Favorite Number: You can check recent five
diverted numbers.
• Cancel: Cancels the corresponding service.
• View Status: Checks the status of the service.
]Cancel All: Cancels all call divert service.
Answer Mode (Menu 9.3.2)
Allows you to determine when to answer the phone.
]Flip Open: This option allows you to answer a call
simply by opening the flip.
]Any Key: You can answer an incoming call by
pressing any key, except the key.
]Send Key Only: You can answer an incoming call by
only pressing the key.
Send My Number (Menu 9.3.3)
This network service allows you to set your phone
number to be displayed (On) or hidden (Off) from the
person to whom you are calling.
Select Set By Network to reset the phone to the
setting that you have agreed upon with your service
provider.
Call Waiting (Menu 9.3.4)
The network will notify you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or View
Status, to check if the function is active or not.
Minute Minder (Menu 9.3.5)
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of the call.
Auto Redial (Menu 9.3.6)
Select On, and your phone will make a maximum of ten
attempts to connect the call after an unsuccessful call
attempt.
Closed User Group (Menu 9.3.7)
Closed user group is a network service that specifies
the group of people whom you can call and who can
call you. For more information contact your network
63
Settings
operator or service provider. If a group index is
specified, it is used for all outgoing calls. If no group
index is specified, the network will use the preferential
index (a specific index that is stored in the network).
]Preset: Setting the selected CUG Index.
]On: Activating and editing the CUG Index.
]Off: Deleting the selected CUG.
Send DTMF (Menu 9.3.8)
You can send the DTMF (dual tone multi-frequency)
tones of the number on the display during a call.
This option is helpful for entering a password or
account number when you call an automated system,
like a banking service.
Security Menu 9.4
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections.
PIN Code Request (Menu 9.4.1)
When the PIN code request feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
nNote
Before disabling the PIN code request feature, you must
enter your PIN
The following options are available:
]Enable: You must enter the PIN each time the phone
is switched on.
]Disable: The phone connects directly to the network
when you switch it on.
Call Barring Services (Menu 9.4.2)
Call barring allows you to restrict from making and
receiving calls with your phone. For this function, you
need the barring password, which you can obtain from
your service provider.
The following options are available:
]All Outgoing: Calls cannot be made.
]Outgoing International: International calls cannot
be made.
64
Settings
]O/G (Outgoing) International Except Home Country:
When abroad, calls can be made only to numbers
within the current country and to your home
country, which is where your home network
provider is located.
]All Incoming: Calls cannot be received.
]Incoming When Abroad: Calls cannot be received
when you are using your phone outside your home
service area.
]Cancel All Barrings: All call barring settings are
deactivated; calls can be made and received
normally.
]Change Password: You can set and change the call
barring password obtained from your service
provider using this option. You must enter the
current password before you can specify a new
one.Once you have entered a new password, you
are asked to confirm it by entering it again.
nNote
To use Call Barring service, you must input the network
password. When calls are barred, calls may be possible to
certain emergency numbers in some networks.
Fixed Dial Number (FDN) (Menu 9.4.3)
Allows you to restrict your outgoing calls to selected
phone numbers, if this function is supported by your
SIM card. The PIN2 code is required.
The following options are available:
]Enable: You can only call phone numbers stored in
the Address Book. You must enter your PIN2.
]Disable: You can call any number.
]Number List: You can view the number list saved as
fixed dial number.
nNote
Not all SIM cards have a PIN2. If your SIM card does not,
this menu option is not displayed.
Change Codes (Menu 9.4.4)
The Change codes feature allows you to change your
current password to a new one. You must enter the
current password before you can specify a new one.
You can change the access codes: Security Code,
PIN1 Code, PIN2 Code
nNote
PIN: Personal Identification Number.
65
Settings
Connection Menu 9.5
Network Selection (Menu 9.5.1)
The Network Selection feature allows you to indicate
how the network you will use is selected when
roaming outside your home area.
Options are: Automatic, Manual, and Preferred.
nNote
You can select a network other than your home network only
if it has a valid roaming agreement with your home network.
]Automatic: Allows you to set the phone to
automatically search for and select one of the
cellular networks available in your area. The phone
will be set to Automatic by default.
]Manual: Allows you to select the desired network
manually from a list of networks. If the connection to
the manually selected network is lost, the phone will
sound an error tone and ask you to select a network
again. The selected network must have a roaming
agreement with your home network, that is, the
operator whose SIM card is in your phone. The
phone lets you select another network if the phone
fails to access the selected network.
If you switch off the phone, the phone will be reset
to Automatic.
]Preferred: You can set a list of preferred networks
the handset should attempt to register with first,
before attempting to register to any other networks.
This list is created from the handset’s predefined list
of known networks.
Change Frequency Band (Menu 9.5.2)
When the America(900/1800) option is selected the
device can be used in the US, and when the
Europe(1900) option is chosen the device can be used
in European countries.
nNote
The US frequency is set at 850/1900 MHz and the European
frequency is set at 1800 MHz.
nNote
Note of caution that depending on the SIM card, the order of
the menu can differ. The Change Frequency Band menu
option sets the GSM frequency band between the GSM
850/1900 used in the US or GSM 1800 used in Europe. This
phone does not automatically search and set the GSM
frequency. Instead the user must manually set the frequency
band based on his/her location.
66
Settings
The default setting is “Europe (850/1900)” so in order to
switch to the European frequency, simply select the
“America (1800)”option from the World Phone Setting menu.
After the selection, turn the phone off and on again to begin
using the new frequency setting. When traveling to different
parts of the world, you must always set the World Phone
Setting to the correct frequency band.
GPRS Attach (Menu 9.5.3)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
nNote
If there is no GPRS coverage and you have chosen Power
On, the phone will periodically try to establish a packet data
connection.
Network Profile (Menu 9.5.4)
This feature sets the Profile during the WAP and MMS
connections. Please see page 45 for further detail. The
Profile menu under the Access Point feature will
display Add, Delete and Editor options, but the reason
why Activate option is not available is because there is
no way of knowing whether WAP or MMS will be used
to activate the content.
Reset Network Profile (Menu 9.5.5)
This allows Profile information to be restored to
original setting. For example, this option will restore
the Profile that has been deleted by the Delete All
selection from the Access Point (Menu 3.4) submenu.
Reset Default Menu 9.6
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
nNote
The password is preset to 0000.
67
Q&A
Please check to see if any problems you have encountered with the phone are described in this section before taking
the phone in for a service or calling a service engineer.
QHow do I view the list of outgoing calls, incoming
calls and missed calls?
APress the key.
QHow do I clear all call history?
APress the left soft key[Menu] and then the
key.
QHow do I view all numbers stored in memory?
APress right soft key [Names] and then .
QWhy is the connection inconsistent or not audible in
certain areas?
AWhen frequency environment is unstable in a
certain area, connection may be inconsistent and
not audible. Relocate to another area and try again.
QWhy is the connection not consistent abruptly
disconnects even when established?
AWhen frequency is unstable or weak or if there are
too many users, connection may be cut off even
after it was established. Please try again later or
attempt after relocating to other areas.
QWhy does the LCD not turn on?
ARemove the battery and turn on the power after
placing it back on. If there is no change, fully charge
the battery and try again.
QWhy is there an echo when a connection is made
with certain telephones in a certain area?
AThis is called the ‘Echo Phenomenon’, where it
occurs if connection volume is too high or caused
by special properties (semi electronic telephone
exchange) of the equipment on the other end.
68
Q&A
QWhy does the phone heat up?
AThe phone may get hot when there is a very long call
duration or when games are played or even when
surfing the Internet for a long time. This has no effect
upon the life of the product or performance.
QWhy is there no ring tone, but only a blinking LCD
screen?
APhone may be set to ‘Vibration All’ or in ‘Silent All’
mode. In the Sound menu, please select Volume →
Ringtone →Volume 1 ~ Volume 5.
QWhy does the battery life get shorter in standby
mode?
AThe battery is worn out. As time passes, the battery
life gradually becomes shorter. If the battery lasts
about half the amount of time as when first
purchased, it’s time to purchase a new battery.
QWhy does the battery run out so quickly during
normal use?
AIt is due to the user environment or a large number
of calls or weak signal.
QWhy is no number dialed when you recall a Address
Book entry?
ACheck that the number has been stored correctly by
using the address book Search feature. Re-store
them, if necessary.
QI cannot find the lock, PIN, or PUK code. What is my
password?
AThe default lock code is ‘0000’. If you forget or lose
the lock code, contact your phone dealer. If you
forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider
70
Safety Guidelines
TIA Safety Information
Provided herein is the complete TIA Safety Information
for Wireless Handheld phones. Inclusion of the text
covering Pacemakers, Hearing Aids, and Other
Medical Devices is required in the ownerís manual for
CTIA Certification. Use of the remaining TIA language
is encouraged when appropriate.
Exposure to Radio Frequency Signal
Your wireless handheld portable telephone is a low-
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF)
signals.
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines
with safety levels for handheld wireless phones. Those
guidelines are consistent with the safety standards
previously set by both U.S. and international standards
bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific
literature. For example, over 120 scientists, engineers,
and physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
*American National Standards Institute;
NationalCouncil on Radiation Protection and
Measurements;International Commission on Non-
Ionizing RadiationProtection
The design of your phone complies with the FCC
guidelines (and those standards).
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate
FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you would any
other telephone with the antenna pointed up and over
your shoulder.
71
Safety Guidelines
Tips on Efficient Operation
For your phone to operate most efficiently:
]Do not touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects
call quality and may cause the phone to operate at a
higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless
phones in the areas where you drive. Always obey
them. Also, if using your phone while driving, please:
]Give full attention to driving - driving safely is your
first responsibility;
]Use hands-free operation, if available;
]Pull off the road and park before making or
answering a call if driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may
not be shielded against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6’)
inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference
with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
]Should ALWAYS keep the phone more than six
inches from their pacemaker when the phone is
turned ON;
]Should not carry the phone in a breast pocket.
]Should use the ear opposite the pacemaker to
minimize the potential for interference.
]If you have any reason to suspect that interference
is taking place, turn your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may want to consult your service provider.
72
Safety Guidelines
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if they
are adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy.
Health Care Facilities
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may use equipment
that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted
notices so require.
Aircraft
FCC regulations prohibit using your phone while in the
air. Turn your phone OFF before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your
phone OFF when in a ‘blasting areaí or in areas posted:
‘Turn off two-way radio’. Obey all signs and
instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are
often, but not always, marked clearly. Potential areas
may include: fueling areas (such as gasoline stations);
below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum
73
Safety Guidelines
gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust, or
metal powders); and any other area where you would
normally be advised to turn off your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
Safety Information
Please read and observe the following information for
safe and proper use of your phone and to prevent
damage. Also, keep the user guide in an accessible
place at all the times after reading it.
Charger and Adapter Safety
]The charger and adapter are intended for indoor
use only.
Battery Information and Care
]Please dispose of your battery properly or take it to
your local wireless carrier for recycling.
]The battery does not need to be fully discharged
before recharging.
]Use only LG-approved chargers specific to your
phone model since they are designed to maximize
battery life.
]Do not disassemble or impact the battery as it may
cause electric shock, short-circuit, and fire. Store
the battery in a place out of reach of children.
]Keep the battery’s metal contacts clean.
]Replace the battery when it no longer provides
acceptable performance. The battery can be
recharged several hundred times before
replacement.
]Recharge the battery after long periods of non-use
to maximize battery life.
]Battery life will vary due to usage patterns and
environmental conditions.
]Use of extended backlighting, MiniBrowser, and
data connectivity kits affect battery life and
talk/standby times.
74
Safety Guidelines
]The self-protection function of the battery cuts the
power of the phone when its operation is in an
abnormal state. In this case, remove the battery
from the phone, reinstall it, and turn the phone on.
Explosion, Shock, and Fire Hazards
]Do not put your phone in a place subject to
excessive dust and keep the minimum required
distance between the power cord and heat sources.
]Unplug the power cord prior to cleaning your phone,
and clean the power plug pin when it is dirty.
]When using the power plug, ensure that it is firmly
connected. If it is not, it may cause excessive heat
or fire.
]If you put your phone in a pocket or bag without
covering the receptacle of the phone (power plug
pin), metallic articles (such as a coin, paperclip or
pen) may short-circuit the phone. Always cover the
receptacle when not in use.
]Do not short-circuit the battery. Metallic articles
such as a coin, paperclip or pen in your pocket or
bag may short-circuit the + and – terminals of the
battery (metal strips on the battery) upon moving.
Short-circuit of the terminal may damage the battery
and cause an explosion.
General Notice
]Using a damaged battery or placing a battery in your
mouth may cause serious injury.
]Do not place items containing magnetic components
such as a credit card, phone card, bank book or
subway ticket near your phone. The magnetism of
the phone may damage the data stored in the
magnetic strip.
]Talking on your phone for a long period of time may
reduce call quality due to heat generated during
use.
]When the phone is not used for a long period time,
store it in a safe place with the power cord
unplugged.
]Using the phone in proximity to receiving equipment
(i.e., TV or radio) may cause interference to the
phone.
]Do not use the phone if the antenna is damaged. If a
damaged antenna contacts skin, it may cause a
slight burn. Please contact an LG Authorized
Service Center to replace the damaged antenna.
]Do not immerse your phone in water. If this
happens, turn it off immediately and remove the
75
Safety Guidelines
battery. If the phone does not work, take it to an LG
Authorized Service Center.
]The power cord on this product will expose you to
lead, a chemical known to the State of California to
cause (cancer) birth defects or other reproductive
harm. Wash hands after handling.
]Do not paint your phone.
]The data saved in your phone might be deleted due
to careless use, repair of the phone, or upgrade of
the software. Please backup your important phone
numbers. (Ring tones, text messages, voice
messages, pictures, and videos could also be
deleted.) The manufacturer is not liable for damage
due to the loss of data.
]When you use the phone in public places, set the
ring tone to vibration so as not to disturb others.
]Do not turn your phone on or off when putting it in
your ear.
FDA Consumer Update
The U.S. Food and Drug Administrationís Center for
Devices and Radiological Health Consumer Update on
Mobile Phones.
1.Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless
phones emit low levels of radiofrequency energy (RF)
in the microwave range while being used. They also
emit very low levels of RF when in the standby mode.
Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no
known adverse health effects. Many studies of low
level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have
not been confirmed by additional research. In some
cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
2.What is the FDA’s role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
76
Safety Guidelines
with new drugs or medical devices. However, the
agency has authority to take action if wireless
phones are shown to emit radiofrequency energy
(RF) at a level that is hazardous to the user. In such a
case, the FDA could require the manufacturers of
wireless phones to notify users of the health hazard
and to repair, replace, or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, the FDA has urged the
wireless phone industry to take a number of steps,
including the following:
]Support needed research into possible biological
effects of RF of the type emitted by wireless phones;
]Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
]Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
The FDA belongs to an interagency working group of
the federal agencies that have responsibility for
different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies
belong to this working group:
]National Institute for Occupational Safety and
Health
]Environmental Protection Agency
]Occupational Safety and Health Administration
]National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
exposure. The FCC relies on the FDA and other health
agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the
wireless phone networks rely upon. While these base
stations operate at higher power than do the wireless
phones themselves, the RF exposures that people get
from these base stations are typically thousands of
times lower than those they can get from wireless
phones. Base stations are thus not the subject of the
safety questions discussed in this document.
77
Safety Guidelines
3.What kinds of phones are the subject of this update?
The term ‘wireless phone’ refers here to handheld
wireless phones with built-in antennas, often called
‘cell’, ‘mobile’, or ‘PCS’ phones. These types of
wireless phones can expose the user to measurable
radiofrequency energy (RF) because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety
guidelines that were developed with the advice of
the FDA and other federal health and safety
agencies. When the phone is located at greater
distances from the user, the exposure to RF is
drastically lower because a person’s RF exposure
decreases rapidly with increasing distance from the
source. The so-called ‘cordless phones,’ which have
a base unit connected to the telephone wiring in a
house, typically operate at far lower power levels,
and thus produce RF exposures far below the FCC
safety limits.
4.What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radiofrequency energy
(RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we don’t know with certainty what the results of
such studies mean for human health. Three large
epidemiology studies have been published since
December 2000. Between them, the studies
investigated any possible association between the
use of wireless phones and primary brain cancer,
glioma, meningioma, or acoustic neuroma, tumors of
the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies
can answer questions about long-term exposures,
78
Safety Guidelines
since the average period of phone use in these
studies was around three years.
5.What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or
more years follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies
is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
6.What is the FDA doing to find out more about the
possible health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radiofrequency energy (RF).
The FDA has been a leading participant in the World
Health Organization International Electromagnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The project has also
helped develop a series of public information
documents on EMF issues. The FDA and the Cellular
Telecommunications & Internet Association (CTIA)
have a formal Cooperative Research and
Development Agreement (CRADA) to do research on
wireless phone safety. The FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through
contracts with independent investigators. The initial
research will include both laboratory studies and
79
Safety Guidelines
studies of wireless phone users. The CRADA will also
include a broad assessment of additional research
needs in the context of the latest research
developments around the world.
7.How can I find out how much radio frequency
energy exposure I can get by using my wireless
phone?
All phones sold in the United States must comply
with Federal Communications Commission (FCC)
guidelines that limit radio frequency energy (RF)
exposures. The FCC established these guidelines in
consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF
exposure from wireless telephones is set at a
Specific Absorption Rate (SAR) of 1.6 watts per
kilogram (1.6 W/kg). The FCC limit is consistent with
the safety standards developed by the Institute of
Electrical and Electronic Engineering (IEEE) and the
National Council on Radiation Protection and
Measurement. The exposure limit takes into
consideration the body’s ability to remove heat from
the tissues that absorb energy from the wireless
phone and is set well below levels known to have
effects. Manufacturers of wireless phones must
report the RF exposure level for each model of phone
to the FCC. The FCC website (http://www.fcc.gov/oet/
rfsafety) gives directions for locating the FCC
identification number on your phone so you can find
your phone’s RF exposure level in the online listing.
8.What has the FDA done to measure the radio
frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for
measuring the radio frequency energy (RF) exposure
from wireless phones and other wireless handsets
with the participation and leadership of FDA
scientists and engineers. The standard,
‘Recommended Practice for Determining the Spatial-
Peak Specific Absorption Rate (SAR) in the Human
Body Due to Wireless Communications Devices:
Experimental Techniques,’ sets forth the first
consistent test methodology for measuring the rate
at which RF is deposited in the heads of wireless
phone users. The test method uses a tissue-
simulating model of the human head. Standardized
SAR test methodology is expected to greatly improve
the consistency of measurements made at different
laboratories on the same phone. SAR is the
80
Safety Guidelines
measurement of the amount of energy absorbed in
tissue, either by the whole body or a small part of the
body. It is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine
whether a wireless phone complies with safety
guidelines.
9.What steps can I take to reduce my exposure to
radiofrequency energy from my wireless phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to radiofrequency energy
(RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure. If
you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of the
RF, since the exposure level drops off dramatically
with distance. For example, you could use a headset
and carry the wireless phone away from your body or
use a wireless phone connected to a remote
antenna. Again, the scientific data do not
demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
10.What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to radiofrequency energy (RF), the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure. Some groups sponsored by
other national governments have advised that
children be discouraged from using wireless phones
at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that
no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
81
Safety Guidelines
on scientific evidence that any health hazard exists.
11.What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones
can interact with some electronic devices. For this
reason, the FDA helped develop a detailed test
method to measure electromagnetic interference
(EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test
method is now part of a standard sponsored by the
Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort
by the FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. The FDA has tested hearing
aids for interference from handheld wireless phones
and helped develop a voluntary standard sponsored
by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing
aids and wireless phones so that no interference
occurs when a person uses a ‘compatible’ phone
and a ‘compatible’ hearing aid at the same time. This
standard was approved by the IEEE in 2000. The FDA
continues to monitor the use of wireless phones for
possible interactions with other medical devices.
Should harmful interference be found to occur, the
FDA will conduct testing to assess the interference
and work to resolve the problem.
12.Where can I find additional information?
For additional information, please refer to the
following resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF
Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation
Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF
Project (http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
82
Safety Guidelines
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When operating a car, driving is your first
responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features
such as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use the
speed dial function without taking your attention off
the road.
2. When available, use a hands-free device. A number
of hands-free wireless phone accessories are
readily available today. Whether you choose an
installed mounted device for your wireless phone or
a speaker phone accessory, take advantage of these
devices if available to you.
3. Position your wireless phone within easy reach.
Make sure you place your wireless phone within
easy reach and where you can reach it without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible, let
your voicemail answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your
first responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to-do” list while driving
a car, you are not watching where you are going. It
is common sense. Don’t get caught in a dangerous
situation because you are reading or writing and not
paying attention to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your
trip or attempt to coincide your calls with times you
83
Safety Guidelines
may be stopped at a stop sign, red light or otherwise
stationary. But if you need to dial while driving,
follow this simple tip— dial only a few numbers,
check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Stressful or
emotional conversations and driving do not mix; they
are distracting and even dangerous when you are
behind the wheel of a car. Make people you are
talking with aware you are driving and if necessary,
suspend conversations which have the potential to
divert your attention from the road.
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools you can
own to protect yourself and your family in dangerous
situations — with your phone at your side, help is
only three numbers away. Dial 911 or other local
emergency number in the case of fire, traffic
accident, road hazard or medical emergency.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call 911 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless
nonemergency assistance number when
necessary. Certain situations you encounter while
driving may require attention, but are not urgent
enough to merit a call for emergency services. But
you can still use your wireless phone to lend a
hand. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency
wireless number.
For more information, please call to 888-901-SAFE, or
visit our website www.wow-com.com
84
Safety Guidelines
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government’s
Requirements for Exposure to Radio Waves.
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based
on standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC
is 1.6W/kg. * Tests for SAR are conducted using
standard operating positions specified by the FCC with
the phone transmitting at its highest certified power
level in all tested frequency bands. Although SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. Because the phone is
designed to operate at multiple power levels to use
only the power required to reach the network, in
general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this
model phone when tested for use at the ear is 1.34
W/kg and when worn on the body, as described in this
user’s manual, is 0.71 W/kg. (Body-worn
measurements differ amongphone models, depending
upon available accessories and FCC requirements.)
While there may be differences between SAR levels of
various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
85
Safety Guidelines
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID BEJMG210.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
website at http://www.wow-com.com
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
86
Glossary
To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the
feature on your mobile phone, here are a few definitions.
Call Divert
Ability to reroute calls to another number.
Call waiting
Ability to inform users that they have an incoming call
when engaged on another call.
GPRS (General Packet Radio Service)
GPRS guaranties continuous connection to the
Internet for mobile phone and computer users. It is
based on the Global System for Mobile Communication
(GSM) circuit-switched cellular phone connections
and the Short Message Service (SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both for
public Web sites and Intranets. When a Java program
runs from a Web page, it is called a Java applet. When
it is run on a mobile phone or pager, it is called a
MIDlet.
Line Identification Services (Caller ID)
Service allowing subscribers to view or block the
telephone numbers of callers.
Multiparty Calls
Ability to establish a conference call involving up to
five additional parties.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
87
Glossary
Roaming
Use of your phone when you are outside your home
area (when traveling for example).
SDN (Service Dial Number)
Telephone numbers supplied by your network provider
and giving access to special services, such as voice
mail, directory inquiries, customer support and
emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information required
to operate the phone (network and memory
information, as well as the subscriber's personal data).
The SIM card fits into a small slot on the back of the
phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be displayed,
received, edited or sent.
Patent Information
This product was manufactured under one or more of
the following U.S.
patents: 5276765 5749067 6061647