LG Electronics USA MR400K RF Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1902507
Application ID	FD9ZYY7uwWrvKjHaMFhpKg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.05kB (475574 bits)
Date Submitted	2013-02-20 00:00:00
Date Available	2013-08-19 00:00:00
Creation Date	2013-01-17 14:53:47
Producing Software	nPDF, http://iblogbox.com/npdf
Document Lastmod	2013-01-17 14:53:47
Document Title	(Microsoft PowerPoint - 09.AN-MR400K\(MR13 4 mode 2D\) Manual_2nd [\310\243\310\257 \270\360\265\345])
Document Creator	nPDF, http://iblogbox.com/npdf

REMOTE CONTROL UNIT USER
INFORMATION
MODEL NAME: ANAN-MR400K
Korean
한국어
목
차
1. 리모콘의 개요 및 제원
(1) 개 요
(2) 제 원
2. 주의 사항
3. 고객 지원
1. 리모콘의 개요 및 제원
(1) 개 요
- 이 리모콘은 사용자가 댁내에서 리모콘을 무선 마우스처럼 사용하여
TV를 제어할 수 있는 제품으로써, 기존 적외선 리모콘이 육안상에 위치한
제품을 제어했던 반면에 댁내 10 m 이내에서 방향에 상관없이 제어할 수
2.4 GHz대 RF 리모콘이다.(음성인식지원)
(2) 제 원
구분
모델명
주파수 대역
내
용
AN-MR400K
2.400 GHz ~ 2.4835 GHz
채널
79 채널
송신출력
10 dBm
수신감도
-86 dBm
크기
폭 56.45 x 두께 36.4 x 길이 136.6
(공차± 1 mm)
무게
66.16g ± 5 g (건전지 포함하지 않음)
전원
AA 1.5 V, 알카라인 건전지 2개 사용
동작 온도
0 ℃ ~ 60 ℃
2. 주의 사항
(1) 밧데리를 교체한 후에는 리모콘 사용법에 따라 페어링 후에 사용한다.
(2) 밧데리를 교체 후 동작하지 않는다면, 밧데리를 제거 후 사용법에 따라
페어링을 재시도한다.
(3) 장기간 리모콘을 사용하지 않는 경우, 밧데리를 제거해 두는 것이 좋다.
(4) 밧데리를 분해하거나, 열을 가해서는 안된다.
(5) 밧데리를 떨어뜨리거나, 케이스가 손상될 정도로 극심한 충격을 줘서는
안된다.
(6) 밧데리를 물에 넣어서는 안된다.
(7) 밧데리를 거꾸로 삽입시 폭발의 위험이 있다.
(8) 지정된 장소에 사용한 건전지를 폐기 한다.
3. 고객 지원
TV 매뉴얼의 서비스 연락처를 참조하세요.
[KCC 인증 마크 및 인증번호]
인증 받은 자의 상호: ㈜ 오성전자
인증번호: KCC-LGE-CMM-MR400K
제조 년 월:
2012 . .
제조자/제조국가: 엘지전자㈜/대한민국
기자재의 명칭/모델명: 특정소출력 무선기기
(무선데이터통신시스템용 무선기기)/AN-MR400K
English
Table of Contents
1. Overview and specification of the remote control
(1) Overview
(2) Specification
2. Precautions
3. Customer Support
1. Overview and Specifications for the Remote Control
(1) Overview
- This remote control is a product that can control the TV by using it
as if it were a wireless mouse in user’s residence. While the existing
infrared remote controls were used for the products that are within the
sight of the user, this product is a RF remote control with frequency
range of 2.4 GHz that can control appliances located within distance of
10 m regardless of the direction within user’s residence.
(Voice recognition support)
(2) Specifications
Categories
Model No.
Range of frequency
Channel
Details
AN-MR400K
2.400 GHz ~ 2.4835 GHz
79 channels
Transmission output
10 dBm
Reception sensitivity
-86 dBm
Dimensions
Weight
Power source
Operational
temperature range
Width 56.45 x Thickness 36.4 x
Length 136.6 (tolerance of ± 1 mm)
66.16g ± 5 g (excluding battery)
AA 1.5 V, 2 alkaline batteries are used
0 ℃ ~ 60 ℃
2. Precautions
(1) After replacement of the battery, use the remote control following pairing
in accordance with user manual.
(2) If the unit does not operate after replacement of battery, take the battery
out and reattempt pairing in accordance with the user manual.
(3) If the remote control is not being used for prolonged period of time, it is
recommendable to remove the battery from the unit.
(4) Do not dismantle or exert heat to the battery.
(5) Do not drop battery or exert extreme impact that may even cause the
case to be damaged.
(6) Do not immerse the battery in water.
(7) There is danger of explosion if the battery is inserted reversely.
(8) Discard the used battery into designated location.
3. Customer Support
Refer to the contact number for services provided in the TV Manual.
※ Regulation
(1) KCC Statement (Korea)
“제작자 및 설치자는 해당 무선설비가 전파혼신 가능성이 있으므로
인명안전과 관련된 서비스는 할 수 없음“
(2) Federal Communications Commission(FCC) Statement
You are cautioned that changes or modifications not expressly approved by
the part responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following measures:
-. Reorient or relocate the receiving antenna.
-. Increase the separation between the equipment and receiver.
-. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
-. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference
that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF
exposure compliance.
(3) Industry Canada(IC) Statement
This device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference. Including interference that
may cause undesired operation of device.
Avis d'Industrie Canada
Cet appareil est conforme à norme CNR-210 des règlements d'Industrie
Canada. Son fonctionnement est sujet aux deux conditions suivantes:
1) Cet appareil ne doit pas provoquer d'interférences et
2) Cet appareil doit accepter toute les interférences. y compris celles
pouvant entraîner son dys-fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
NOTE: THE MANUFACTURERE IS NO T RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.
Avis d'Industrie Canada sur I'exposition aux rayonnements
Cet appareil est conforme aux limites d'exposition aux rayonnements
d'Industrie Canaca pour unenvironnement non contrôlé.
REMARQUE: LE FABRICANT N'EST PAS RESPONSIBLE DES INTERFÉRENCES
RADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NON AUTORISÉES
APPORTÉES APPORTÉES À CET APPAREIL. DE TELLES MODIFICATIONS
POURRAIT ANNULER L'AUTORISATION ACCORDÉE À L'UTILISATEUR DE FAIRE
FONCTIONNER L'APPAREIL.
(4) CE Statement
1) CE conformity Notice
LG Electronics hereby declares that this product is in compliance with
the following Directives.
R&TTE Directive 1999/5/EC
The products described above comply with the essential requirements
of the directives specified.
This device is a 2.4GHz wideband transmission system, intended for use in
all EU member states and EFTA countries.
European representative:
LG Electronics Inc. Krijgsman 1, 1327
DM Amstelveen, The Netherlands
2) CE Notified Body statement:
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
Explosive device proximity warning – Do not operate a portable
transmitter (such as a wireless network device) near unshielded blasting
caps or in an explosive environment unless the device has been modified
to be qualified for such use.
3) Certification Marking

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 12
Producer                        : nPDF, http://iblogbox.com/npdf
Create Date                     : 2013:01:17 14:53:47
Modify Date                     : 2013:01:17 14:53:47
Title                           : (Microsoft PowerPoint - 09.AN-MR400K\(MR13 4 mode 2D\) Manual_2nd [\310\243\310\257 \270\360\265\345])
Creator                         : nPDF, http://iblogbox.com/npdf
Author                          : 
Subject                         : Microsoft PowerPoint - 09-AN-MR400K(MR13 4 mode 2D) Manual_2nd [호환 모드]

EXIF Metadata provided by EXIF.tools