LG Electronics USA MR400Q Magic Remote QWERTY User Manual 00 AN MR400Q

LG Electronics USA Magic Remote QWERTY 00 AN MR400Q

Manual

     [한국어]                           Magic Remote Qwerty User Information (Model Name: AN-MR400Q) 목  차   1.  리모콘의  개요  및  제원             (1)  개  요           (2)  제  원 2.  주의사항 3.  고객  지원 4. . Attention complaint of nations (1)  개  요   -  이  리모콘은  사용자가  댁내에서  리모콘을  무선  마우스처럼  사용하여   TV를  제어할 수  있는  제품으로써,  기존  적외선  리모콘이  육안상에   위치한  제품을  제어했던  반면에  댁내  10 m  이내에서  방향에  상관없이   제어할  수 2.4 GHz대  RF  리모콘이다  (2)  제  원 구  분  내    용 모델명 AN-MR400Q 주파수  대역 2.400GHz ~ 2.4835GHz 채널 79채널 송신출력 +10 dBm 수신감도 -86 dBm 크기 55.8 x 137.6 x 26.8 (공차  ±  1 mm) 무게  124.5 g  ±5g (건전지  포함하지  않음)  전원 DC 3V (AA Alkaline Battery 2ea) 동작  온도 0℃  ~ 60℃  1.  리모콘의  개요  및  제원
                                        2.  주의사항 (1)  밧데리를  교체한  후에는  리모콘  사용법에  따라  페어링  후에 사용한다.   (2)  밧데리를  교체  후 동작하지  않는다면,  밧데리를  제거  후  사용법에  따라  페어링을  재시도한다. (3)  장기간  리모콘을  사용하지  않는  경우,  밧데리를  제거해  두는  것이  좋다. (4)  밧데리를  분해하거나,  열을  가해서는  안  된다. (5)  밧데리를  떨어뜨리거나, 케이스가  손상될  정도로  극심한  충격을  줘서는  안  된다. (6)  밧데리를  물에  넣어서는  안된다. (7)  밧데리를  거꾸로  삽입시  폭발의  위험이  있다. (8)  지정된  장소에  사용한  건전지를  폐기  한다. 3.  고객  지원 TV 매뉴얼의  서비스  연락처를  참조하세요.      [KCC  인증  마크  및  인증번호]          인증  받은  자의  상호:  ㈜  오성전자         인증번호: KCC-CRM-LGE-MR400Q       제조  년  월:    2012 .    .           제조자/제조국가:  엘지전자㈜/대한민국         기자재의  명칭/모델명:  특정소출력  무선기기                                       (무선데이터통신시스템용  무선기기)/AN-MR400Q
[ENGLISH]                                Contents   1. Overview and Specifications of the remote control               (1) Overview             (2) Specifications   2. Cautions   3. Customer Support   4. User Notice   (1) Overview   - This remote control is a product that can control the TV by using it as if it were a wireless mouse in user’s residence. While the existing infrared remote controls were used for the products that are within the sight of the user, this product is a RF remote control with frequency range of 2.4 GHz that can control appliances located within distance of 10 m regardless of the direction within user’s residence.  (2) Specifications   Item  Description Model Name AN-MR400Q Frequency band 2.400GHz ~ 2.4835GHz Channels 79 Tx power +10 dBm Reception sensitivity -86 dBm Size 55.8 x 137.6 x 26.8 (Tolerance  ±  1 mm) Weight 124.5g±5g(excluding battery)   Power supply DC 3V (AA Alkaline Battery 2ea) Operating temperature 0℃  to +60℃ 1. Overview and Specifications of the remote control
                                        2. Cautions (1) After replacement of the battery, use the remote controller following pairing in accordance with user manual. (2) If the unit does not operate after replacement of battery, take the battery out and reattempt pairing in accordance with the user manual. (3) If the remote controller is not being used for prolonged period of time, it is recommendable to remove the battery from the unit. (4) Do not dismantle or exert heat to the battery. (5) Do not drop battery or exert extreme impact that may even cause the case to be damaged. (6) Do not immerse the battery in water. (7) There is danger of explosion if the battery is inserted reversely. (8) Discard the used battery into designated location. 3. Customer Support Refer to the contact number for services provided in the TV Manual.
4. Attention complaint of nations                                          (1) KCC Statement(Korea)  “제작자  및  설치자는  해당  무선설비가  전파혼신  가능성이  있으므로       인명안전과  관련된  서비스는  할  수  없음“  (2) Federal Communications Commission(FCC) Statement           You are cautioned that changes or modifications not expressly approved by the part responsible           for compliance could void the user’s authority to operate the equipment.           This equipment has been tested and found to comply with the limits for a Class B digital device,   pursuant to part 15 of the FCC rules.           These limits are designed to provide reasonable protection against harmful interference in a   residential installation.           This equipment generates, uses and can radiate radio frequency energy and, if not installed and   used in accordance with the instructions, may cause harmful interference to radio   communications.           However, there is no guarantee that interference will not occur in a particular installation.           If this equipment does cause harmful interference to radio or television reception, which can   be determined by turning the equipment off and on, the user is encouraged to try to correct   the interference by one or more of the following measures:        -. Reorient or relocate the receiving antenna.             -. Increase the separation between the equipment and receiver.             -. Connect the equipment into an outlet on a circuit different from that to which the receiver   is connected             -. Consult the dealer or an experienced radio/TV technician for help.  This device complies with Part 15 of the FCC Rules.         Operation is subject to the following two conditions:               1) this device may not cause harmful interference, and               2) this device must accept any interference received, including interference that may   cause undesired operation of the device.  Indoor use only       FCC Caution: Any changes or modifications not expressly approved by the       party responsible for compliance could void the user's authority to operate       this equipment.  FCC RF Radiation Exposure Statement:       This equipment complies with FCC radiation exposure limits set forth for an       uncontrolled environment.       End users must follow the specific operating instructions for satisfying RF
[SPECIFICATION] (1) Model Name: AN-MR400Q     (2) Batch/Serial No.: -     (3) Manufacturer: OHSUNG Electronics     (4) Brand: LG Electronics     (5) Product Name: Magic Remote Qwerty

Navigation menu