LG Electronics USA MT310 Cellular/AWS/PCS CDMA Phone with Bluetooth User Manual MT310

LG Electronics USA Cellular/AWS/PCS CDMA Phone with Bluetooth MT310

Users Manual

USER GUIDE MT310 Please read this manual carefully before operating your mobile phone. Retain it for future reference. Copyright 200ⓒ9 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.
Part 15.21 statement" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.
Part 15 Class B ComplianceThis device and its accessories comply with part15 of FCC rules.Operation is subject to the following two conditions:(1) This device & its accessories may not cause harmful interference.(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.Body-worn OperationThis device has been tested for typical body-worn operations with the distance of 0.79inches (2.0cm) from the user’s body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.79inches(2.0cm) must be maintained from the user's body.Additionally, Belt clips, holsters & other body-worn accessories may not containmetallic components.
Phone Overview 1. Earphone Jack Allows the use of a headset to hear caller's voice. 2. Side Keys Use to adjust the ringer volume in standby mode and the earpiece volume during a call. 3. Side Camera Key Use for quick access to Camera function. 4. Charger Port Connects the phone to the battery charger or other available accessories. 5. Camera Lens lets you take pictures and videos. 6. Speaker lets you hear the different ringers and sounds. Note To charge the phone with PC USB, USB driver should be installed in advance. LG USB Driver supports Windows98SE, ME, 2000, XP and Vista. Driver can be downloadable from your service provider's website. Charging with PC USB You can use your computer to charge your phone. Connect one end of a USB cable to the charging accessory port on your phone and the other end to a highpower USB port on your PC (commonly located on the front panel of the computer). When charging with Hub, charge the phone with Hub Power. Menus Overview Contacts 1. New Contact 2. Contact List 3. Groups 4. Speed Dials 5. My Name Card Messaging 1. New Text Message 2. New Picture Message 3. Inbox 4. Sent 5. Drafts 6. Voicemail 7. Templates 8. Settings 1. All Messages 2. Text Message 3. Picture Message 4. Edit Voicemail# 9. Delete All
1. Delete Inbox 2. Delete Sent 3. Delete Drafts 4. Delete All Messages Call History 1. Missed Calls 2. Received Calls 3. Dialed Calls 4. All Calls 5. Call Timer 1. Last Call 2. Home Calls 3. Roam Calls 4. All Calls 6. Data Counter 1. Received Data 2. Sent Data 3. All Data Multimedia 1. Take Photo 2. Record Voice 3. Images 4. Audios 5. Shuffle easyedge 1. easyedge 2. easydege Info My Schedule 1. Alarm Clock 2. Calendar 3. Notepad Bluetooth 1. Paired Devices 2. Power 3. My Visibility 4. My Bluetooth Name 5. My Bluetooth Info Tools 1. Voice Command 2. My Menu 3. Ez Tip Calc 4. Calculator
5. World Clock 6. Stopwatch 7. Unit Converter Settings 1. Sound 1. Ringers 2. Volume 3. Message Alerts 4. Alert Type 5. Service Alerts 6. Power On/Off Tone 7. Flip Tone 2. Display 1. Wallpaper 2. Banner 3. Backlight 4. Menu Style 5. Languages 6. Clocks & Calendar 7. Font Settings 3. Security 1. Lock Phone 2. Restrictions 3. Emergency #s 4. Change Lock Code 5. Reset Default 4. Call Settings 1. Answer Options 2. Auto Retry 3. One-Touch Dial 4. Voice Privacy 5. Auto Volume 6. Airplane Mode 7. TTY Mode 5. PC Connection 6. System 7. Memory 1. Reserved Memory 2. Multimedia 8. Phone Info Getting Started with Your Phone The Battery The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and
standby time. The battery charge level is shown at the top of the LCD screen. Installing the Battery Remove the battery cover by sliding it downward followed by the arrow indicator. Align the battery with the terminals near the top of the phone. Align the battery cover then slide it to the right side until it clicks into place. Removing the Battery Turn the phone off. Slide the battery cover to left side and remove it. Use the opening near the bottom of the battery to lift the battery out. Charging the Battery To use the charger provided with your phone: Warning! Use only the charger provided with the phone. Using any charger other than the one included with the MT310 may damage your phone or battery. Note It is important to fully charge the battery before initial use of the phone. Notice Please make sure that the LG logo faces down before inserting a charger, data cable, etc into the charger port of your phone. 1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet. 2. The charge time varies depending upon the battery level. Battery Charge Level The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved. Turning the Phone On and Off Turning the Phone On 1. Install a charged battery or connect the phone to an external power source. 2. Press END for about 3 seconds until the LCD screen lights up. Turning the Phone Off 1. Press END and hold until the display turns off. Signal Strength Call quality depends on the Getting Star ted with Your Phone signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon -- the more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window. Screen Icons To see the icon glossary, go to Menu -> Settings -> Phone Info. -> Icon Glossary on your phone.
Making Calls 1. Make sure the phone is turned on. If not, press END for about 3 seconds. 2. Enter the phone number (include the area code if needed). 3. Press .lf the phone is locked, enter the lock code (the last 4 digits of your phone number by default and it's changeable in Settings menu). Note The call quality is also affected by the places where you are and weather conditions with RF emission changes. Note If the phone is restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contact List. To turn off this function: Menu -> 9. Settings -> 3. Security -> Lock Code -> OK -> 2. Restrictions -> 1. Calls -> 4. None -> OK 4. Press END to end the call. Correcting Dialing Mistakes If you make a mistake while dialing a number, press BACK once to erase the last digit entered, or hold down BACK for at least 2 seconds to go to the standby mode. Redialing Calls 1. Press TALK twice to redial the last number you dialed. The last 120 numbers (missed, received, dialed) are stored in the call history list and you can also select any of these to redial. Receiving Calls 1. When the phone rings or vibrates, press TALK to answer. 2. Press twice to end the call. Tip To choose answer options: Menu -> 9. Settings -> 4. Call Settings -> 1. Answer Options. Choose from the following options: Flip Open/ Any Key/ Send Key Only/ Auto Answer Note If you press or (the side keys), while the phone is ringing, the ringing or vibration is muted for that call. Quick Access to Convenient Features Lock Mode Sets your phone to require a 4-digit password in order to use the phone. To quickly lock your phone press for three seconds. To cancel, press Left Soft Key Unlock, enter the password and press . Mute Function The Mute Function is used during a phone call. To quickly activate Mute press Left Soft Key Mute, then to cancel press Left Soft Key Unmute. Volume Quick Adjustment Use the side keys to adjust the ringer volume while in standby mode, and the earpiece volume
during a phone call. The upper key increases the volume and the lower key decreases the volume. Call Waiting Your cellular service may offer call waiting. While a call is in progress, two beeps indicate another incoming call. When call waiting is enabled, you may put the active call on hold while you answer the other incoming call. Check with your cellular service provider for information about this function. Note Until you change it, the default lock code/password is the last 4 digits of your phone number. Note Keypad Volume is adjusted through the Sound Volume menu: Menu -> 9. Settings -> 1. Sound -> 2. Volume -> 2. Keypad Quick Acces s to Convenient Features 1. Press TALK to receive a waiting call. 2. Press TALK again to switch between calls. Caller ID Caller ID displays the phone number or name of the incoming call. If the caller’s identity is stored in Contacts, the name will appear along with the phone number. Check with your service provider to ensure they offer this feature. Speed Dialing Speed dialing is a convenient feature that allows you to make phone calls quickly. A number key can be assigned to a specific phone number. By pressing and holding down a number key, your phone will recall the phone number associated from the Contact List and display it briefly while simultaneously dialing that phone number for you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable. Dialing Single Digit Speed Dials (from 2 to 9) Press and hold the Speed Dial number. OR Enter the Speed Dial number and press . Dialing Double Digit Speed Dials (from 10 to 99) Press the first digit and then press and hold the key of the second digit. OR Enter the first and second digits and press . Entering and Editing Information Text Input You can input and edit your Banner, Calendar, Contacts, Alarm Clock, Notepad, and Messages. Key Functions
Left Soft Key: Press to scroll through the following text input modes: T9Word(T9WORD/T9Word/T9word) -> Abc(ABC/Abc/abc) -> 123 -> Symbols “*” Shift: Press to change capitalization T9 text : T9Word -> T9WORD -> T9word Abc text : Abc -> ABC -> abc “0” Next: In T9 mode, press to display other matching words. “#” Space: Press to complete a word and insert a space. “BACK” Clear: Press to delete a single space or character. Hold to delete the whole message. “1” Punctuation: In T9 mode, press to insert punctuation in a word and complete a sentence. Contacts in Your Phone’s Memory The Basics of Storing Contacts Entries 1. From standby mode enter the phone number you want to save (up to 48 digits). 2. Press Left Soft Key Save. 3. Select either Save New or Update Existing. 4. Use to highlight a Label and press OK . Mobile 1/ Home/ Work/ Mobile 2/ Fax 5. Enter a name for the phone number (up to 22 characters) and press OK . A confirmation message is displayed briefly. Phone Numbers With Pauses When you call automated systems, such as voice mail or credit billing numbers, you often have to enter a series of numbers to navigate through the system. Instead of entering these numbers by hand, you can store the numbers in your Contacts separated by special pause characters (W, P). There are two different types of pauses you can use when storing a number: Wait (W) The phone stops dialing until you press Left Soft Key Release to advance to the next number. Pause (P) The phone waits 2 seconds before sending the next string of digits. Note Use Update Existing to add another phone number to a contact already stored in memory. Contacts in Your Phone’s Memory Storing a Number with Pauses 1. Press OK Menu. 2. Press 1 Contacts. 3. Press 1 New Contact. 4. Enter a name (up to 22 characters) and enter a number. 5. Press Right Soft Key Options. 6. Press 3 Wait or 4 Pause. 7. Enter additional number(s) then press OK .
Adding a Pause to an Existing Number 1. Press Right Soft Key Contacts to display your Contacts alphabetically. 2. Use to highlight the Contact entry to edit, then press OK. 3. Press Left Soft Key Edit. 4. Use to highlight the number. 5. Press Right Soft Key Options. 6. Press 3 Wait or 4 Pause. 7. Enter additional number(s), then press OK. Searching Your Phone’s Memory The MT310 phone is able to perform a dynamic search of the contents in your phone’s memory. A dynamic search compares entered letters or numbers against the entries in your Contacts. A matching list is displayed in descending order. You can then select a number from the list to call or edit. Scrolling Through Your Contacts 1. Press Contacts to display your Contacts alphabetically. 2. Use to scroll through the list. Searching by Letter 1. Press Contacts to display your Contacts alphabetically. 2. Press (or press repeatedly) the key on the keypad that corresponds with the search letter. Accessing Options 1. Press Right Soft Key Contacts. 2. Press Right Soft Key Options. 3. Select an option (use then press OK ,or press the corresponding number on the keypad): “1” Send Message: Send a text message or picture message to the selected contact. “2” Delete: Delete the selected entry in your Contacts. “3” Edit: Edit the selected contact information. “4” Delete Multiple: Choose from Selective/ All to delete multiple entries at one time. “5” Send via Bluetooth: Send a contact(vCard) via Bluetooth. In case Bluetooth power is not on, a notice pops up to turn Bluetoothon. “6” Set Speed Dial/ Remove Speed Dial: Set a speed dial or remove the speed dial. Making a Call From Your Phone’s Memory Once you have stored phone numbers in your Contacts, you can place calls to those numbers quickly and easily. _ By pressing Send Key TALK after searching for a phone number in Contacts or Recent Calls and highlighting it. _ By using Speed Dialing. From Contacts 1. Press Right Soft KeyContacts to display your Contacts. 2. Use to highlight the Contact entry, then press OK. 3. Use to highlight the phone number.
4. Press TALK to place the call. From Call History 1. Press Left Soft Key Menu. 2. Press “3” Call History. 3. Use to highlight the type of recent call, then press OK. Missed Calls/Received Calls/Dialed Calls/All Calls 4. Use to highlight the phone number. 5. Press TALK to place the call. Speed Dialing For a single-digit Speed Dial, press and hold the digit or press the digit, then press TALK. For a double-digit Speed Dial, press the first digit and hold the second digit or press the first and second digits, then press TALK. . Using Phone Menus Contacts The Contacts Menu allows you to store names, phone numbers and other information in your phone’s memory. When you access your Contacts, the number in parentheses represents the number of entries you have stored (up to 1000). 1. New Contact Allows you to add a new contact to your Contact List. 1. Press OK ,1 ,1. 2. Enter the name, then press . 3. Highlight the field you wish to store the contact information in. 4. Enter the phone number or e-mail address. 5. Continue adding the desired contact information to the entry. 6. When you are finished entering the desired contact information, press OK Save to save the entry into your Contact List. 2. Contact List Allows you to view your Contact List. 1. Press OK ,1 ,2 . 2. Choose from the following options: Note Using this submenu, the number is saved as a new Contact. To save the number into an existing Contact, edit the Contact entry. _ Press to scroll through your Contacts alphabetically. _ Press Right Soft Key Options to select one of the following: Send Message/ Delete/Edit/ Delete Multiple/Send via Bluetooth/ Set Speed Dial _ Press OK View to view the contact's information.
_ Press Left Soft Key New to store new contact information. 3. Groups Allows you to view your grouped Contacts, add a new group, change the name of a group, or delete a whole group. 1. Press OK ,1 ,3. 2. Choose from the following options: _ Use to highlight a group, then press OK View to view the contacts in the selected group. _ Press Left Soft Key New to add a new member to the group. _ Use to highlight a group, then press Right Soft Key Options to choose from the following options: Delete/ Send Message/Rename Group/ Set Ringtone/Delete All 4. Speed Dials Allows you to view your Speed Dials list, designate new Speed Dials, or remove Speed Dial designations entered in your Contacts. 1. Press OK, 1,4. 2. Use to highlight the desired Speed Dial location (or enter the Speed Dial digit), and press OK Assign. 3. Use to highlight the Contact. 4. Use to highlight the number, then press OK . A confirmation message is displayed. 5. My Name Card Allows you to view all of your personal Contact information including name and phone numbers. 1. Press OK, 1, 5. 2. Use to highlight the feature you wish to edit, and press Left Soft Key Edit. 3. Edit the information as desired and press OK . Note You cannot edit phone number, but you can add an additional phone number. Messaging The phone can store up to 435 messages. The MT310 supports up to 1000 characters. The information stored in the message is determined by phone model and service capability. Other limits such as available characters per message may exist, please check with your service provider for system features and capabilities. 1. New Text Message Allows you to send text messages, pages, and e-mail transmissions. Each message will
be formatted and sent according to the destination address. The Basics of Sending a Text Message 1. Press OK, 2, 1. 2. Enter the recipient's address. 3. Press OK to access the message screen. 4. Type your message (text or e-mail). 5. Press OK Send. A confirmation message is displayed. Select Recipient(s) Using Options 1. Press OK, 2, 1. 2. Press Right Soft Key Options. 3. Use to highlight an option and press OK. Contacts To select a recipient from your Contact List. Recent Calls To select a recipient from your Recent Calls. Recent Messages Choose Inbox/ Sent to select a recipient from your Recent Messages. Groups Select a recipient from your Groups. General/ Family/ Friends/Colleagues/ Business/ School Cancel Cancels editing your message. 4. Complete your message and send or save it. Customize Your Text Message Using Options While you are composing the text of a message you can insert customized text. 1. Press OK, 2, 1. 2. Enter the recipient's address. 3. Use or press OK to highlight the Message window. 4. Press Right Soft Key Options. 5. Use to highlight an option and press OK. Add Templates/ Signature Save As Draft/ Templates Priority Level Normal/ High Callback # On/ Off Delivery Notice Enhanced/ Normal Cancel Cancels editing your message. 6. Complete your message and send or save it. Message Icon Reference Inbox New/Unread Text/Picture Message Opened/Read Text/Picture Message New/Unread Notification Message Opened/Read Notification Message Priority High MMS New/Read Priority High Sent Failed Text/Picture Message Failed Multiple Text/Picture Messages
Sent Message Pending Multi Messages Pending Sent Text/Picture Message Multiple Text/Picture Messages in transfer Text/Picture Message delivered Multiple Messages delivered Drafts Draft Text Message Draft Picture Message 2. New Picture Message Allows you send messages with Text, Image and Audio. 1. Press OK, 2, 2. 2. Enter the recipient's address, or press Right Soft Key Options to search Contacts, and press OK to select the desired contact. 3. Press OKto access the message screen. 4. Type your message. 5. With the highlight on Image, press Left Soft Key Add, and press OK to select: Image / Take Photo 6. Use to highlight a picture, then press Left Soft Key Set. 7. With the highlight on Audio, press Left Soft Key Add, highlight an option, and press OK to select: My Audios/ Default 8. Use to highlight a sound, then press Left Soft Key Set. 9. Use to highlight a subject, then enter subject. 10. Use Right Soft Key Options. 11. Use to highlight an option and press OK. * Editing the Receiver Contacts/ Recent Calls/Recent Messages/Groups/Online Album/ Cancel * Editing the Text Preview Shows your message before sending. Add Templates/ Signature/Slide Go to Previous Slide/ Next Slide Save As Draft/ Templates Priority Level Normal/ High Delivery Notice Informs you that the message has been successfully delivered to the recipient. Enhanced/ Normal Remove Image/ Audio/ Slide Cancel Cancels the contents of message field. * Editing the Image Preview/ Add Slide/ Go to/ Save As Draft/ Priority Level/Delivery Notice/ Remove/Cancel * Editing the Audio Preview/ Add Slide/ Go to/ Save As Draft/ Priority Level/ Messaging Delivery Notice/ Remove/ Cancel * Editing the Subject Preview/ Add/ Go to/ Save As/ Priority Level/ Delivery Notice/ Remove/ Cancel 12. Press OK to send.
3. Inbox The phone alerts you in 2 ways when you receive a new message by: _ Displaying a notification message on the screen. _ Displaying the message icon (It blinks when the message is urgent). The phone will also ring or vibrate when you receive a new message. Received text messages, page messages, picture messages and e-mail lists may be searched and the contents viewed. Received messages are displayed from newest to oldest. Viewing Your Inbox Up to 300 received messages can be stored in the Inbox. 1. Press OK, 2, 3. 2. Use to highlight an inbox message. 3. Press Left Soft Key Reply to reply, or Right Soft Key Options . Press OK to view the message. Access additional options. For text messages: Delete/ Forward/ Save Contact/ Lock/ Message Info/ Delete Multiple For picture messages: Delete/ Forward/ Save Contact/ Lock/ Message Info/ Delete Multiple 4. While viewing the selected message, press Left Soft Key Reply to reply, or Right Soft Key Options to view additional options. Delete Deletes the selected message. Forward Forwards a received message to other destination address(es). Save Contact Stores the callback number, e-mail address, and numbers in the received message into your Contacts. Save as Template Stores the message as a template for future messages. Call Back Calls the number in the received message. Lock/Unlock Locks or unlocks the selected message. Message Info Shows the message type, priority, and status. Note For picture messages: Play Again/ Delete/ Forward/ Save Contact/ Save Media/ Lock/ Message Info 4. Sent Up to 100 sent text messages or picture messages can be stored in the Sent. Access the Sent message list to view contents of sent messages and verify whether the transmission was successful or not. 1. Press OK, 2, 4. 2. Use to highlight a sent message. Press Left Soft Key Resend to resend the message to the recipient, OK View to view the message, or Right Soft Key Options to access additional options. Delete/ Forward/ Save Contact/ Lock/ Message
Info/ Delete Multiple 3. While viewing the selected sent message, press Left Soft Key Resend to resend the message to the recipient, or Right Soft Key Options to access additional options. Delete Deletes the selected message. Forward Forwards a received message to other destination address(es). Save Contact Stores the callback number, e-mail address, and numbers in the received message into your Contacts. Save as Templates Stores the message as a template for future messages. Lock/Unlock Locks or unlocks the selected message. Message Info Shows the message type priority and status. Note For picture messages: Play Again/ Delete/ Forward/ Save Contact/ Save Media/ Lock/ Message Info 5. Drafts Displays saved messages and draft messages. 1. Press OK, 2, 5. 2. Use to highlight a Saved message. _ Press OK Edit. _ Press Right Soft Key Options. Delete Deletes the selected message from the Drafts. Save Contact Select Save New/ Update Existing to store the callback number, e-mail address,and numbers in the received message into your Contacts or update an existing contact already stored in memory. Lock/Unlock Locks a message so that it is not erased if the Erase Saved or Erase All feature is used. Delete Multiple Select Selective/ All to delete multiple messages at one time. 6. Voicemail Allows you to view new voice messages recorded in your voice mail box. Your phone will alert you when you receive a new voice message. Checking Your Voicemail Box 1. Press OK, 2, 6. 2. Choose from the following options: _ Press Left Soft Key Clear to clear the voicemail counter. _ Press TALK to listen to the message(s). _ Press Right Soft Key Exit to return to the Messaging menu. 7. Templates Allows you to display, edit, and add text phrases. These text strings allow you to reduce
manual text input into messages. 1. Press OK, 2, 7. 2. Press Left Soft Key New to create a new template. Enter text and press OK to save the template. 3. Use to highlight a template and press Right Soft Key Options, then highlight an option and press OK to select: Delete/Edit 8. Settings Allows you to configure 10 settings for messages. 1. Press OK, 2, 8. 2. Use to highlight All Messages/ Text Message/ Picture Message/ Edit Voicemail # then press OK. 3. Use to highlight one of the settings and press OK to select it. Message Settings Sub-Menu Descriptions All Messages 1. Auto Save (Auto Save/Prompt/ Do Not Save) With this feature on, messages are automatically saved in Sent when transmitted. 2. Auto Delete (On/ Off) With this feature on, read messages are automatically deleted when you exceed the storage limit. 3. Entry Mode Allows you to select the default input method including T9Word, Abc and 123. 4. Signature (On/ Off/ Edit) Allows you to make/edit a signature to automatically send with your messages. For example: 1. Assign the number 2 as a speed dial for one of your contacts. 2. Compose a new text or picture message. In the destination address window, hold down the number 2 key instead of entering the address, and the message will be automatically sent to that contact. Text Message 1. Auto View (On/ Off) When set to On, new messages will automatically display on your screen when they are received. 2. Auto Play (On/ Off) Allows the display to automatically scroll down while viewing messages. 3. Callback # (On/ Off/ Edit) With this feature on, you can input the callback number that will be automatically included when you send a message. Picture Message 1. Auto Receive (On/ Off) With this set to On, attached content will automatically download when a new picture message is received. Edit Voicemail # Allows you to manually enter the access number for Voicemail Service. This feature should only be used when a VMS (Voicemail Call History Service) access number is not provided from the network. 9. Delete All Allows you to erase the messages stored in your Inbox, Sent, or Saved message folders. You can also erase all messages at the same time.
1. Press OK, 2, 9. 2. Use to highlight an option: Delete Inbox/ Delete Sent/ Delete Drafts/ Delete All Messages then press OK. 3. Use to highlight Yes/ No and press OK. Call History The Recent Calls Menu is a list of the last phone numbers or Contacts entries for calls you placed, accepted, or missed. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list. 1. Missed Calls Allows you to view the list of missed calls; up to 40 entries. 1. Press OK, 3, 1. 2. Use to highlight an entry. Note To view a quick list of all your recent calls, press TALK Key from standby mode. 2. Received Calls Allows you to view the list of incoming calls; up to 40 entries. 1. Press OK, 3, 2. 2. Use to highlight an entry. 3. Dialed Calls Allows you to view the list of outgoing calls; up to 40 entries. 1. Press OK, 3, 3. 2. Use to highlight an entry. 4. All Calls Allows you to view the list of missed, received and dialed calls; up to 120 entries. 1. Press OK, 3, 4. 2. The history of all calls are displayed. 5. Call Timer Allows you to view the duration of selected calls. 1. Press OK, 3, 5. 2. Use to highlight a call list, then press OK. Last Call/ Home Calls/ Roam Calls/ All Calls 6. Data Counter Allows you to view the list of received and transmitted data calls.
1. Press OK, 3, 6. 2. Use to highlight a data call list, then press OK. Received Data/ Sent Data/ All Data Multimedia View, take, and trade your digital pictures right from your wireless phone. 1. Take Photo 1. Press OK, 4, 1. 2. Set the brightness , zoom and press Right Soft Key Options to change other settings. _ Use to highlight an option and press OK. View Mode Fit to Screen/ Landscape Resolution 640X480/ 320X240/ 176X144/ 160X120 Quality Fine/ Normal/ Economy Zoom Brightness Night Mode On/ Off Self Timer Off/ 3 Seconds/ 5 Seconds/ 10 Seconds White Balance Auto/ Sunny/ Cloudy/ Tungsten/ Fluorescent Color Effects Color, Sepia,Mono, Negative Template On/ Off Shutter Sound None/ Sound 1/ Sound 2/ Sound 3/ Say Cheese Multishot Off/ 3 shots/ 6 shots 3. Take a picture by pressing OK. 4. Press Right Soft Key Delete OK, Send, or Left Soft Key Save. Choose from the following save options: _ Save _ Set As 1. Main Screen 2. Front Screen 3. Picture ID The picture is stored in Gallery. 2. Record Voice Allows you to add, listen to, and erase short verbal reminders. 1. Press OK, 4, 2. 2. Press OK Record to record a new voice memo. 3. Talk into the microphone, then press OK Stop. 4. While the highlight is still on the recording, press Right Soft Key Options to access the following: Set as/ Rename/ Delete 5. Press Left Soft Key to save. The default memo title is the date and time of recording.
3. Images Allows you to select images to customize your phone's Main Screen, Front Screen, or Picture ID. 1. Press OK, 4, 3. 2. Use to highlight My Images/ Default then press . 3. Use to highlight the image you want to display. _ Press Right Soft Key Options to access additional options. Use to highlight an option and press OK. Set as/ Take Photo/ Delete/ Rename/ Lock/ List View/ Information/ Delete Multiple/ Sort by/ Send via Bluetooth _ Press OK View to view the selected image. _ Press Left Soft Key Send to send the selected image to somebody else. (This option is only available in My Images). 4. Audios Allows you to choose audio clips. 1. Press OK, 4, 4. 2. Press Left Soft Key Voice to record an audio clip. _ Press Left Soft Key Audio to access My Audios list. _ Press OK Record to begin recording. _ While recording, press Left Soft Key Pause to pause, or OK Stop to stop recording. _ When you are finished recording, press Left Soft Key Save to save the audio clip, OK Send to send the audio clip to somebody else, or Right Soft Key Options to access additional options. Use to highlight Set as / Rename/ Delete and press OK. 3. Use to highlight My Audios/ Default and press OK. 4. Use to highlight the audio clip. _ Press Left Soft Key Send to send the selected audio clip to somebody else. _ Press OK Play to play the selected audio clip. _ Press Right Soft Key Options to access additional options. Use to highlight an option and press OK. For My Audios: Set as/ Record Voice/ Delete/ Rename/ Lock/ Information / Delete Multiple/ Sort By/ Send Via Bluetooth For Default: Set as/ Information 5. Shuffle Allows you to set your wallpaper and ringtone to change randomly. If you turn off the phone, the setting is deactivated. 1. Press OK, 4, 5. 2. Use to highlight Ringtone List/ Wallpaper List then press OK. 3. Press Left Soft Key Add to begin adding ringtones or wallpapers to the Shuffle list. 4. Use to highlight the desired ringtones or wallpapers and press OK to select them. 5. Press Left Soft Key Done when you are finished selecting the ringtones or wallpapers you wish to add.
easyedgeSM easyedgeSM allows you to do more than just talk on your phone. easyedge is a technology and service that allows you to download and use applications on your phone. With easyedge, it is quick and easy to personalize your phone to suit your lifestyle and tastes. Just download the applications that appeal to you. From ringtones and wallpapers to games and productivity tools, you can be assured you will find something useful, practical, or down right entertaining. There are new applications constantly available for your use. Downloading Applications You can download applications and use easyedgeSM where service is available. Incoming Calls While downloading an application, incoming calls will automatically be sent to your voice mail, if available. If you do not have voice mail, downloading will not be interrupted by an incoming call, and the caller will receive a busy signal. When using applications, an incoming call will automatically pause the application and allow you to answer the call. When you complete your call, you can resume using the application. 1. easyedge 1. Press OK, 5, 1. Shortcut Pressing the right arrow key will start easyedgeSM. 2. easyedge Info Allows you to choose whether or not the Data Charges Warning message will pop up when starting easyedge. 1. Press OK, 5, 2. Managing Your easyedgeSM Applications Add new applications and remove old ones at any time. Removing Applications Only removing an application deletes it completely from the memory of the phone. To restore an application once it has been removed, you will be charged to download it again. 1. Access easyedge. 2. Go to my stuff tab. 3. Use to to highlight an application. 4. Press Left Soft Key OPTIONS. 5. Use to highlight Delete, then press OK. 6. Press Left Soft Key YES. My Schedule 1. Alarm Clock Allows you to set up to five alarms. At the alarm time, any set alarm will sound the tone of your choice, and an alarm message will be displayed on the LCD screen. 1. Press OK, 6, 1. 2. Use to highlight the alarm you wish to set, then press OK to select it. 3. Press Left Soft Key Set to set the alarm time. 4. Use to highlight Repeat (recurrence setting). 5. Press to select one of the following. Once/ Daily/ Mon - Fri/Weekends
6. Use to highlight Ringtones, press Left Soft Key Set and select a ringtone. 7. Press OK Save. 2. Calendar Allows you to store and access your agenda(s). Simply enter your appointments in the Calendar, and your phone will alert you with a reminder. 1. Press OK, 6, 2. 2. Use to highlight the scheduled day. Moves cursor to the left. Moves cursor to the right. Moves to the previous week. Moves to the next week. 3. Press Left Soft Key New. 4. Use to highlight the field you wish to edit, then press Left Soft Key Set to edit your schedule information: _ Set Time _ Subject _ Reminder _ Repeat _ Repeat End _ Ringtone 5. Press OK Save. 3. Notepad Allows you to add, read, edit, and erase notes to yourself. 1. Press OK, 6, 3. 2. Press Left Soft Key New to write a new note. 3. Type the note, then press OK. A confirmation message displays briefly, then displays your list of notes. Viewing a Notepad Entry 1. Access Notepad and highlight the entry. 2. To erase, press Right Soft Key Options. _ “1” Delete _ “2” Edit _ “3” Delete All To edit a note, highlight the entry, then press OK View and press Left Soft Key Edit. Or press Right Soft Key Delete. Note The Bluetooth features available on this handset may not be compatible with all Bluetooth enabled devices. Your service provider or handset manufacturer cannot be held responsible for compatibility issues with devices not sold by the service provider or handset manufacturer. Note Read user guide of each Bluetooth accessory that you are trying to pair with your phone because the instructions may be different. Bluetooth® The MT310 is compatible with devices that support the Bluetooth headset and handsfree profile(s). You may create and store 20 pairings within the MT310 and connect to one device at
a time. The approximate communication range for Bluetooth wireless technology is up to 30 feet (10meters). Bluetooth QD ID B013582 1. Paired Devices Pairing is the process that allows the handset to locate, establish and register 1-to-1 connection with the target device. For pairing new Bluetooth® device 1. Press OK, 7, 1. 2. Follow the Bluetooth accessory instructions to set the device to pairing mode. 3. Press left soft key Search. 4. If Bluetoothpower is set to off, you will be prompted to turn power on. Highlight Yes and press OK. 5. The device will appear in the Add New Device menu once it has been located. Highlight the device and press OK. 6. The handset will prompt you for the passkey. Consult the Bluetoothaccessory instructions for the appropriate passkey (typically “0000” - 4 zeroes). Enter the passkey and press OK. 7. Once pairing is successful, select Yes and press to connect with the device. 8. Once connected, you will see the device listed in the Paired Devices menu. 2. Power Allows you to set the power On/Off. 1. Press OK, 7, 2. 2. Use to select a setting, then press . On/ Off 3. My Visibility Allows you to set the visibility of your Bluetooth device. 1. Press OK, 7, 3. 2. Use to select a setting, then press OK. Visible/ Hidden Note By default, your device’s Bluetooth functionality is turned off. 4. My Bluetooth Name Allows you to edit the name of the Bluetoothdevice. 1. Press OK, 7, 4. 2. Hold down BACK to clear the existing name. 3. Use the alphanumeric keypad to enter a new alias. 4. Press OK to save and exit, or Right Soft Key Cancel to cancel editing. 5. My Bluetooth Info Allows you to view the information of the Bluetooth. 1. Press OK, 7, 5.
Tools Your phone tools include: Voice Command, My Menu, Ez Tip Calc, Calculator, World Clock, Stopwatch, and Unit Converter. 1. Voice Command Allows you to make phone calls quickly and easily by voice. Your phone recalls the number from your Contacts, displays it briefly, and then dials it. This menu also includes a feature for those who are driving or blind. It delivers time information by voice and allows you to check missed calls, messages and voicemails. 1. Press OK, 8, 1, 1. 2. When prompted, say “Call”. 3. When prompted, say the name or phone number of the Contact you want to call. The phone will ask you to confirm Note If you turn on My Visibility, your device is able to be searched by other in-range Bluetooth devices. the name or phone number before dialing. Call <Name> or <Number>/Voicemail/ Missed Calls/Messages/ Time & Date/Help 2. My Menu Allows you quick access to your favorite menus. A maximum of 12 items can be stored in My Menu. 1. Press OK, 8, 2. 2. Select the location of your choice by using , then press OK. 3. Select the menu you wish to add to My Menu by using , then press OK. 3. Ez Tip Calc Allows you to quickly and easily estimate the tip and total amount of a bill by inputting the bill amount before tip, the tip percentage, and dividing it by the number of people paying. 1. Press OK, 8, 3. 4. Calculator Allows you to perform simple mathematical calculations. You can enter numbers up to the sixth decimal place. 1. Press OK, 8, 4. 2. Enter data. _ Use keypad to enter numbers. _ Use “*” to enter decimals. _ Press Left Soft Key Clear to the entry. _ Press Right Soft Key Operator for additional _ Use Navigation Keys to enter functions.
_ Press OK to complete equation. 5. World Clock Allows you to determine the current time in another time zone or country. 1. Press OK, 8, 5. 2. Press Right Soft Key Cities to select a specific city and display the date/time in that location. 3. Use to scroll through all available cities on the map. 4. Press OK to select the highlighted city. 5. Press Left Soft Key Set DST. 6. Stopwatch Stopwatch is available just as common stopwatches we see and use in daily life. 1. Press OK, 8, 6. 2. Press OK Start to start, and press OK Stop to stop. _ You can use the Lap function by pressing Right Soft Key Lap to record up to 20 laps and lap times. 3. Press Left Soft Key Reset to reset. 7. Unit Converter Allows you to measure Length, Area, Mass, Volume and Temperature. 1. Press OK, 8, 7. Settings 1. Sound Options to customize your phone's sounds: 1.1 Ringers Allows you to assign ringtones for incoming calls. 1. Press OK, 9, 1, 1. 2. Select All Calls/ Caller ID/ No Caller ID/ Restricted Calls/ Shuffle. 3. Select My Audios or Default. 4. Use to highlight the ringtone. 5. Press OK Play to preview the ringtone, and Left Soft Key Set to set as ringtone to your phone. 1.2 Volume Allows you to set various volume settings. 1. Press OK, 9, 1, 2. 2. Select Master Volume/ Keypad/ Earpiece/ Speaker. 3. Use to adjust the volume of the ringer, then press OK to save the setting.
1.3 Message Alerts Allows you to select the alert tone for a new message, and set the frequency of the Message Reminder. 1. Press OK, 9, 1, 3. 2. Select Text Message/ Picture Message/ Voicemail/ All Messages/ Message Reminder. 3. Use to select a setting, then press OK. 1.4 Alert Type Allows you to select the alert types. 1. Press OK, 9, 1, 4. 2. Use to highlight the alert you wish to edit. Call Alert/ Message Alerts/ Schedule Alert/ Alarm Alert 3. Use to scroll through the alert types. Ring Only/ Vibrate Only/ Ring & Vib 4. Press OK to save. 1.5 Service Alerts Allows you to set any of the 3 Alertoptions to On or Off. 1. Press OK, 9, 1, 5. 2. Select an alert option. 1.5.1 Minute Beep Alerts you 10 seconds before the end of every minute during a call. 1.5.2 Call Connect Alerts you when the call is connected. 1.5.3 Back to Top Alerts you when you scroll through the end of a menu list. 1.5.4 Low Battery Alerts you when the battery charge level is low. 1. Use to set On/ Off, then press OK. (for Low Battery option, Announce/ Tone) 1.6 Power On/Off Tone Allows you to set the phone to sound a tone when the phone is powered on and off. 1. Press OK, 9, 1, 6. 2. Use to set to On/ Off, then press OK. 1.7 Flip Tone Allows you to set a flip tone that will play when you flip your phone open or closed. 1. Press OK, 9, 1, 7. 2. Use to set to On/ Off, then press OK. 2. Display Options to customize your phone's display screen.
2.1 Wallpaper Allows you to choose the kind of background to be displayed on the phone. 1. Press OK, 9, 2, 1. 2. Select Main Screen/ Front Screen/ Shuffle, then press OK . 2.1.1 Main Screen Highlight an image from My Images or Default, and press OK View to view the image, and Left Soft Key Set to set it as the wallpaper. 2.1.2 Front Screen Highlight an image from My Images or Default, and press OK View to view the image, and Left Soft Key Set to set it as the wallpaper. 2.1.3 Shuffle Set Shuffle to On or Off, set it to Main Screen or Front Screen, and set the repeat frequency. 2.2 Banner Allows you to enter a string of characters which display on the LCD screen. 1. Press OK, 9, 2, 2. 2. Use to scroll between On/ Off. 3. Use to highlight the message window. 4. Input text and press Left Soft Key Abc to change text options, Save to save, or Right Soft Key Cancel to cancel editing your banner. 2.3 Backlight Allows you to set the duration for illuminating the backlight. 1. Press OK, 9, 2, 3. 2. Choose a submenu, then press OK. Display/ Keypad 3. Use to select a setting, then press OK. 2.4 Menu Style Allows you to view the Menu as an Icon or List display. 1. Press OK, 9, 2, 4. 2. Select Icon or List and press OK . 2.5 Languages Allows you to set the bilingual feature according to your preference. Choose between English and Spanish. 1. Press OK, 9, 2, 5. 2. Use to select English or Spanish, then press OK. 2.6 Clocks & Calendar Allows you to select the type of clocks displayed on the main LCD or sub LCD. 1. Press OK, 9, 2, 6. 2. Choose a sub-menu and press OK Main Screen/ Front Screen
3. Use to highlight an option and press OK. 2.7 Font Settings Allows you to select the type of font displayed on LCD. 1. Press OK, 9, 2, 7. 2. Choose a sub-menu and press OK. Font Type/ Dial Font Style/ Dial Font Size 3. Use to highlight an option, then press OK. Options for Font Type LG Arial/ LG Script/ LG Serif Options for Dial Font Style Magic/ Digital/ Basic Options for Dial Font Size Normal/ Large 3. Security The Security menu allows you to secure the phone electronically. 3.1 Lock Phone Keeps your phone from unauthorized use. Once the phone is locked, it is in restricted mode until the lock code is entered. You can still receive phone calls and make emergency calls. You can modify the lock code by setting a New Lock code within the Security menu. 1. Press OK, 9, 3. 2. Enter the four-digit lock code and press OK. The default lock code is commonly the last 4 digits of your phone number. 3. Press 1 Lock Phone. 4. Use to select an option, then press OK. Unlock The phone is never locked (Lock mode can be used). Lock The phone is always locked. When locked, you can receive incoming calls and make only emergency calls. On Power Up The phone is locked when it is turned on. 3.2 Restrictions Allows you to restrict Calls, Messaging, Camera or easyedge. 1. Press OK, 9, 3. 2. Enter the four-digit lock code and press OK. 3. Press 2 Restrictions. 4. Use to select Calls/ Messaging/ Camera/ easyedge, then press OK. Note You can receive the incoming calls from saved contacts on your phone, when Incoming Only is on. 3.3 Emergency #s Allows you to enter 3 emergency numbers. You can call these emergency numbers and 911, even when the phone is locked or restricted.
1. Press OK, 9, 3. 2. Enter the four-digit lock code and press OK. 3. Press OK 3 Emergency #s. 4. Press OK to edit the emergency numbers. 5. When you are finished editing the number, press Save to save, or Right Soft Key Cancel to cancel editing. 3.4 Change Lock Code Allows you to enter a new fourdigit lock code. 1. Press OK, 9, 3. 2. Enter the four-digit lock code and press OK. 3. Press 4 Change Lock Code. 4. Use to select an option, then press OK. Phone Only Allows you to lock phone. Call & Applications Allows you to lock call & application. 5. Enter a new 4-digit lock code and press OK. 6. For confirmation, it will ask you to enter the new lock code again. 3.5 Reset Default Allows you to reset your phone to the factory default settings. 1. Press OK, 9, 3. 2. Enter the four-digit lock code and press OK. 3. Press 5 Reset Default. 4. A message will pop up that says "Preference settings will be set to factory defaults. Press OK <OK> to continue." 5. Use to highlight an option and press OK. Revert/ Cancel. 4. Call Settings The Call Settings menu allows you to designate how the phone handles both incoming and outgoing calls. 4.1 Answer Options Allows you to determine how to handle an incoming call. 1. Press OK, 9, 4, 1. 2. Use to select a setting, then press OK. Flip Open/ Any Key/ Send Key Only/ Auto Answer 4.2 Auto Retry Allows you to set the length of time the phone waits before automatically redialing a number when the attempted call fails. 1. Press OK, 9, 4, 2. 2. Use to select a setting, then press OK. Off/ Every 10 Seconds/ Every 30 Seconds/ Every 60 Seconds 4.3 One-Touch Dial Allows you to initiate a speed dial call by pressing and holding the speed dial digit. If set to Off,
Speed Dial numbers designated in your Contacts will not function. 1. Press OK, 9, 4, 3. 2. Use to select a setting, then press OK. On/ Off 4.4 Voice Privacy Allows you to set the voice privacy feature for CDMA calls as Enhanced or Standard. CDMA offers inherent voice privacy. Check with your service provider for availability. 1. Press OK, 9, 4, 4. 2. Use to select a setting, then press OK. Enhanced/ Standard 4.5 Auto Volume When this feature is enabled, it provides a better audio experience by controlling the dynamic range and volume of the sending and receiving voices across different environments and conditions. 1. Press OK, 9, 4, 5. 2. Use to select a setting, then press OK. On/ Off 4.6 Airplane Mode Only allows you to use features on your phone that do not require wireless communications. 1. Press OK, 9, 4, 6. 2. Read the displayed message and press OK to continue. 3. Use to select a setting, then press OK. On/ Off 4.7 TTY Mode Allows you to attach a TTY (Teletype writer) device, enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY. 1. Press OK, 9, 4, 7. 2. Read the displayed message and press OK to continue. 3. Use to select a setting, then press OK. TTY Full/ TTY + Talk/ TTY + Hear/ TTY Off 5. PC Connection Allows you to select the data port. 1. Press OK, 9, 5. 2. Use to select a setting, then press OK. USB Modem/ Bluetooth/ Closed 6. System The System menu allows you to designate specific system network settings.
6.1 Network 6.1.1 System Select Allows you to set up the phone producer’s management environment. Leave this setting as the default unless you want to alter system selection as instructed by your service provider. 1. Press OK, 9, 6, 1, 1. 2. Use to highlight Home Only/ Automatic A/ Automatic B then press OK . 6.1.2 Set NAM Allows you to select the phone’s NAM (Number Assignment Module) if the phone is registered with multiple service providers. 1. Press OK, 9, 6, 1, 2. 2. Use to highlight NAM1 or NAM2, then press OK. 6.1.3 Auto NAM Allows the phone to automatically switch between programmed telephone numbers corresponding to the service provider area. 1. Press OK, 9, 6, 1, 3. 2. Use to highlight On or Off, then press OK. 6.1.4 Serving System Identifies the channel number of a system that is served as a SID Number. This information should only be used for technical support. 1. Press OK, 9, 6, 1, 4. 6.2 Location Menu for GPS (Global Positioning System: Satellite assisted location information system) mode. 1. Press OK, 9, 6, 2. 2. Use to highlight a setting, then press OK. Location On/ E911 Only 7. Memory Allows you to check out the memory status of your phone. 1. Press OK, 9, 7. 2. Use to highlight Reserved Memory/Multimedia, and press OK. 8. Phone Info The Phone Info menu provides you with specific information pertaining to your phone model. 1. Press OK, 9, 8. 2. Use to highlight an option and press OK, or press the corresponding number key. My Number/ ESN/MEID/ Icon Glossary/ Version Note GPS satellite signals are not always transmitted, especially under bad atmospheric and environmental conditions, indoors etc.
HAC RF Emission & T-Coil Information

Navigation menu