LG Electronics USA NSO Tablet with WLAN and Bluetooth User Manual UserGuide ZNFNSO 20160502

LG Electronics MobileComm USA, Inc. Tablet with WLAN and Bluetooth UserGuide ZNFNSO 20160502

Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	2980679
Application ID	FLyWlM+sS0FNXLkpnC6xZA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.51kB (1006364 bits)
Date Submitted	2016-05-05 00:00:00
Date Available	2016-11-10 00:00:00
Creation Date	2017-12-04 05:05:23
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-04 05:05:23
Document Title	UserGuide_ZNFNSO_20160502.pdf
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	heeju.an

KT1601
INSTRUCTION MANUAL
’16.X
Index
Radio Frequency (RF) Signals …………………………..… 252
FCC Statement for the USA …………………………………254
Regulatory information ……………………………………… 256
Important Safety Information ……………………………….. 256
Before Using this
Terminal
• This terminal supports LTE, GSM/GPRS and
wireless LAN systems.
• Since this terminal uses wireless signal,
it may not be able to use in a location
with no signal reception such as a tunnel,
underground, a building, an outdoor location
with weak or poor signal reception, or a
location outside of the XXX service areas.
Also this terminal may not be able to use
on high upper ﬂoors of high-rise apartments
or buildings, even if you can see no
obstructions around you. Please note that on
occasion, data communication may become
disconnected even when you are in a strongsignal area with 4 signal bars displayed while
you are not moving.
• Since this terminal uses wireless signal,
there are possibilities that a third party
may intercept your telephone call. However,
LTE and GSM/GPRS systems support the
privacy function covering all telephone calls
automatically. Therefore, even a third party
intercepts your telephone call, the third party
can hear nothing but the noise.
Contents/Precautions
• Because this terminal conducts wireless
communication by transforming sound into
digital signal, the received sound may diﬀer
from the actual one if the transmitted digital
signal cannot properly be restored according
to conditions such as moving into a poor
signal area.
• Regularly take a memo of the information you
registered in this terminal or store it in the
external memories such as microSD card or
PC. XXX assumes no responsibility for any
loss of your data caused by malfunction,
repair, change to a new model or any other
reasons.
• Even though the display on this terminal
applies advanced technique, part of the dots
may not light up as well as those always-on
light. Please note that this is a feature of the
display. It is not a malfunction.
• When free space is not enough in microSD
card or in this terminal, the performance
of the activated applications may become
improper. In that case, delete the saved data.
• Note that we do not guarantee any
performances of the optional accessories you
purchase at stores.
• The same as a PC, when you install an
application, this terminal's performance may
become unstable, or your location information
and personal information registered on this
terminal might be sent to outside via Internet
and therefore cause fraudulent use. To avoid
this, make sure to conﬁrm the source and the
operating conditions of the application before
installation.
• This terminal uses only nano UIM card. Bring
your mini UIM card, UIM card or XXX card to a
Shop to exchange it.
• This terminal does not respond to i-mode
website (programs) access or i- α ppli, etc.
• The terminal automatically performs
communications for some functions, for
example, to synchronize data, check the
latest software, maintain connection with the
server, etc. Additionally, when you download
applications or watch video etc, a large
amount of packet communication charges are
executed. Therefore, it is highly recommended
to use packet pack or packet ﬂat-rate service.
• Depending on the application and the
service you use, packet communication
fees may charge even under Wi-Fi® data
communication.
• This terminal does not support Pubic mode
(driving mode).
• In this terminal, sounds other than ringtone
and notiﬁcation sounds (video playback
sound, music playback sound, shutter sound,
etc.) cannot be muted even when it is set to
"Manner Mode (Vibrate only, Do not disturb)".
• You can conﬁrm your own phone number as
follows.
From the Home screen, "Apps" X "Settings" X
"About phone" X "Status".
• You can conﬁrm the software version of this
terminal as follows.
From the Home screen, "Apps" X "Settings" X
"About phone" X "Software info".
• You can update to the latest software for
this terminal. For details, refer to "Software
Update" (P240).
• In the terminal, functions may be added or
operation steps may be changed due to
upgrading Operating System (OS). For latest
information of additional function or operation
steps, refer to website.
• When OS is upgraded, some applications
used for former OS may not work or
unintended failure may occur.
• The applications and services are subject to
change without prior notice.
Contents/Precautions
• Please read the terms of service of Google
Inc. regarding Google services. Also, read
each terms of services for other web
services.
• In case of loss of the terminal, set the screen
to ensure the security of the terminal. For
details, refer to "Lock Screen" (P175).
• If you lose your terminal, change password
of online service accounts from PC so that
Google Services such as Gmail, Google Play,
and service such as SNS, etc. should not be
used by others.
• This terminal does not support service
providers other than sp-mode, mopera U or
Business mopera Internet.
• Subscription to sp-mode is required when
using tethering.
• When using tethering, subscribing to a
packet pack or packet ﬂat-rate service is
highly recommended.
• For details of usage charge, refer to website.
Safety Precautions (ALWAYS
FOLLOW THESE PRECAUTIONS)
■ Before using this terminal, read these
"Safety Precautions" carefully so that you
can use it properly. After reading the safety
precautions, keep this manual in a safe place
for later reference.
■ These precautions are intended to protect
you and others around you. Read and follow
them carefully to avoid injury, damage to the
product or damage to property.
■ The signs below indicate the levels of danger
or damage that may occur if the particular
precautions are not observed.
DANGER
This sign indicates that incorrect
WARNING handling poses a risk of causing
death or serious injury.
CAUTION
Contents/Precautions
This sign indicates that incorrect
handling has a high possibility of
causing death or serious injury.
This sign indicates that incorrect
handling poses a risk of causing
slight injury or damage to the
product or property.
■ The following symbols indicate special
warnings regarding product usage.
Denotes things not to do
(prohibition).
Denotes not to disassemble.
Denotes not to use where it
could get wet.
Denotes not to use with wet
hands.
■ "Safety Precautions" are explained in the
following seven sections.
Handling the Terminal, Battery Pack, Adapter,
TV Antenna Cable, Mickey Window Cover and
nano UIM card (Common) ………………… P10
Precautions for this Terminal …………… P13
Precautions for Battery Pack …………… P17
Precautions for Adapter …………………… P19
Precautions for Mickey Window Cover
…………………………………………………… P22
Precautions for nano UIM card
…………………………………………………… P22
Precautions for Using near Electronic
Medical Equipment ………………………… P22
Material List…………………………………… P23
Denotes mandatory
instructions (matters that must
be complied with).
Denotes that the equipment
should be unplugged.
Contents/Precautions
Handling the Terminal, Battery Pack,
Adapter, TV Antenna Cable, Mickey Window
Cover and nano UIM card (Common)
DANGER
Do not use, store or leave it in places
with a high temperature such as
besides ﬁre, besides a heater, inside
a kotatsu, under direct sunlight or in
cars under the blazing sun.
Fire, burns, or injury may result.
Do not put in heating appliances
such as microwaves or high pressure
containers.
Fire, burns, injury, or electric shock
may result.
Do not disassemble or remodel.
Fire, burns, injury, or electric shock
may result.
10
Contents/Precautions
Do not get wet with water, drinking
water, pet urine, sweat, etc.
Fire, burns, injury, or electric shock
may result.
For waterproofness, refer to the
following. → P34 "Waterproofness/
Dustproofness"
Do not get wet on charging connector,
microUSB connection terminal or
earphone/microphone jack by liquids
such as water, drinking water, pet
urines, sweat, etc.
Fire, burns, injury, or electric shock
may result.
For waterproofness, refer to the
following. → P34 "Waterproofness/
Dustproofness"
Use the optional accessories speciﬁed
by XXX for this terminal.
Fire, burns, injury, or electric shock
may result.
WARNING
Do not put strong force, severe
shocks, or throw them.
Fire, burns, injury, or electric shock
may result.
Do not let charging connector,
microUSB connection terminal or
earphone/microphone jack touch any
conductive metal such as metal piece,
pencil lead, etc. Also do not put any of
them inside.
Fire, burns, injury, or electric shock
may result.
Do not cover or wrap this terminal
or its accessories with bedding, etc.
while using or charging.
Fire or burns may result.
Make sure to turn oﬀ this terminal
or stop charging before going to the
places like a gas station where a
ﬂammable gas fumes.
Catching ﬁre may result.
Turn oﬀ the power when using OsaifuKeitai at gas stations (before turning
oﬀ the power, release the lock for
Osaifu-Keitai if it is set).
If the equipment starts giving oﬀ a
strange smell, overheats, becomes
discolored or deformed during use,
charging or in storage, immediately
perform the following operations.
• Remove the power plug from the
wall outlet or cigar lighter socket.
• Turn oﬀ this terminal.
• Remove the battery pack from this
terminal.
Fire, burns, injury, or electric shock
may result.
Contents/Precautions
11
CAUTION
Do not place the horizontal charge
adapter on unstable locations such as
wobbly tables or slanted locations.
Injury may result from the terminal
falling down.
Do not store the horizontal charge
adapter in humid, dusty places, or in
hot areas.
Fire, burns, or electric shock may
result.
If children use it, a guardian should
explain the precautions and correct
operations. Also make sure that the
instructions are followed during use.
Injury may result.
Keep out of reach of babies and small
children.
Accidental swallowing, injuries or
electric shock may result.
12
Contents/Precautions
Be careful especially when using this
terminal with the adapter connected
continuously for a long time.
If you use video call, watch videos,
play games, watch TV, etc. while
charging the battery for a long time,
the terminal, battery pack and adapter
may be heated.
Directly touching a hot part for a long
time may cause redness, itching or
rash on your skin, or low-temperature
burns depending on your constitution
and/or health condition.
Precautions for this Terminal
WARNING
Do not lighten the light near eyes.
Especially, when you shoot photos of
babies or infants, keep this terminal
1 m or more away from babies and
infants.
Vision problems may result. Accidents
may result from being blind or being
shocked.
Do not get liquids such as water, or
foreign objects such as metal pieces
or ﬂammable materials into the nano
UIM card slot or microSD card slot of
this terminal.
Fire, burns, injury, or electric shock
may result.
Do not turn on lights in front of the
auto driver directly.
Accident may result from the weak
vision caused by light.
Contents/Precautions
13
When boarding an airplane, turn the
terminal OFF or turn airplane mode on.
As there are usage restrictions in an
airplane, follow the instructions from
the airline.
Failure to do so may cause airplane
electronic equipment to fail or
malfunction.
If you commit any prohibited acts,
such as using the phone in an airplane,
you will be punished in accordance
with the law.
When using the terminal in a medical
facility, follow the instructions of the
facility.
Turn the terminal OFF in areas where
use is prohibited.
Electronic devices or electronic
medical devices may be adversely
aﬀected.
14
Contents/Precautions
When you talk via handsfree setting
or when the ringtone is ringing, keep
the terminal away from your ear.
And, when connecting the earphone/
microphone jack etc. to this terminal
and playing a game or music, adjust
the volume moderately.
Too loud volume may cause a hearing
loss. And, if you cannot hear the sound
around you clearly, it may cause an
accident.
If you have a weak heart, be careful
when setting the Vibrate alert
(vibration) or alert volume setting.
Harmful eﬀect on heart may result.
When you use electronic medical
equipment, check with the equipment
manufacturer to determine how the
device is aﬀected by radio waves
before using.
Harmful eﬀect on electronic medical
equipment etc. may result.
Turn oﬀ this terminal in places near
high precision electronic devices or
devices using weak electronic signals.
Electronic devices may be adversely
aﬀected by reasons such as malfunction.
* Examples to pay attention to when
using electronic devices
Hearing aids, implanted cardiac
pacemakers, implanted deﬁbrillator,
other medical electronic devices, ﬁre
alarms, automatic doors and other
automatically controlled devices.
If you are using an implanted cardiac
pacemaker, implanted deﬁbrillator or
any other electronic medical device,
consult the manufacturer or retailer
of the device for advice regarding
possible eﬀects from radio waves.
When the display or camera lens is
accidentally broken, be careful of
broken glass or exposed internal
parts of this terminal.
Since the reinforced glass is used
on the surface of the display and the
camera lens, they are structured for
the glass not to scatter. However,
if you carelessly touch broken or
exposed parts, you may get injured.
Contents/Precautions
15
CAUTION
Do not swing this terminal by its
strap, etc.
It may hit you or someone else and
may result in an accident such as an
injury.
Do not use a broken terminal.
Fire, burns, injury, or electric shock
may result.
When using the motion sensor, ensure
the safety of you and those around
you, hold this terminal ﬁrmly, and
avoid extreme movements.
Injury may result.
16
Contents/Precautions
If the display part is accidentally
broken and liquid crystal leaks out, do
not make the material contact with
your skin of face or hands.
It leads to blindness or skin problems.
If liquid crystal gets into your eyes or
mouth, rinse it with clean water and
see a doctor immediately. And, if the
material adheres to skin or clothing,
use alcohol etc. to immediately wipe it
oﬀ, and then wash with soap.
If you use this terminal in a car,
contact the car manufacturer or
dealer to ask about the eﬀect from
radio waves.
Depending on the type of car, in-car
electronic devices could be adversely
aﬀected. In this case, stop using this
terminal immediately.
Itching, rash or eczema may be
caused depending on your physical
conditions or predisposition. If an
abnormality occurs, stop using this
terminal immediately, and then seek
medical attention.
• For the material of each part
→ P23 "Material List"
When watching the display, take a
certain distance from the display in a
fully bright place.
Visual loss may result.
Precautions for Battery Pack
■ Conﬁrm the battery type from the label of
the battery pack.
Display
Li-ion00
Battery type
Lithium-ion battery
DANGER
Do not contact the connector with
metal such as wire. Also do not carry
or store it with metal necklace, etc.
Fire, explosion, getting heated or liquid
leak of the battery pack may result.
Check the orientation of the battery
pack when inserting it into this
terminal. Stop putting excessive force
when any problem is found during
inserting.
Fire, explosion, getting heated or liquid
leak of the battery pack may result.
Contents/Precautions
17
Do not throw this terminal into ﬁre or
heat it.
Fire, explosion, getting heated or liquid
leak of the battery pack may result.
Do not put excessive force such as
nailing the battery pack, hitting with a
hammer or stepping on it.
Fire, explosion, getting heated or liquid
leak of the battery pack may result.
When the liquid from battery pack
splashes into your eyes, do not rub
your eyes. Wash your eyes and go to
consult with a doctor immediately.
Blindness may result.
18
Contents/Precautions
WARNING
Stop using it when transformation or
damage is caused by dropping.
Fire, explosion, getting heated or liquid
leak of the battery pack may result.
When battery pack leaks liquid or
gives oﬀ odor, stop using it and keep
it away from ﬁre.
Ignition, ﬁre, explosion may result from
liquid leaking.
Keep pets away from biting the
battery pack.
Fire, explosion, getting heated or liquid
leak of the battery pack may result.
CAUTION
Do not discard it as combustible
waste.
Fire and environmental pollution may
result. Tape the connector to isolate
the battery pack and bring it to a Shop
or follow the local disposal regulations.
Do not use or charge the wet battery
pack.
Fire, explosion, getting heated or liquid
leak of the battery pack may result.
When battery pack leaks liquid inside,
do not touch your skin, such as your
face or hands.
It leads to blindness or skin problems.
If such liquid gets into your eyes or
mouth, if it adheres to your skin or
clothing, please rinse with clean water
immediately. If it gets into your eyes or
mouth, please seek medical attention
immediately after washing.
Precautions for Adapter
WARNING
Do not use it if the adapter cord gets
damaged.
Fire, burns, or electric shock may
result.
Do not use the AC adapter in a highly
humid area such as a bathroom.
Fire, burns, or electric shock may
result.
DC adapter is only for minus earth
car. Do not use it on plus earth car.
Fire, burns, or electric shock may
result.
When it starts to thunder, do not
touch the adapter.
Electric shock may result.
Contents/Precautions
19
Do not make the charging terminal
short out while being connected to
the outlet or cigar lighter socket. Do
not touch the charging terminal with a
part of your body such as your hands
or ﬁngers.
Fire, burns, or electric shock may
result.
Do not place heavy objects on the
adapter cord.
Fire, burns, or electric shock may
result.
When you insert and remove AC
adapter from the power outlet, do not
contact a metal strap or any other
metal objects with this terminal.
Fire, burns, or electric shock may
result.
When this terminal is connected with
an adapter, do not subject excessive
force to any direction.
Fire, burns, injury, or electric shock
may result.
20
Contents/Precautions
Do not touch the adapter cord,
charging connector or the outlet with
wet hands.
Fire, burns, or electric shock may
result.
Only use with the speciﬁed power
source and voltage. When charging
overseas, use a compatible AC
adapter.
If incorrect voltage is used, this may
cause ﬁre, burns or electric shock.
• AC adapter: AC 100 V
• DC adapter: DC 12 V/24 V
(only for minus earth car)
• Available AC adapter used overseas:
AC 100 V to 240 V (connect to
household AC outlet only)
Use the speciﬁed fuse when the fuse
of DC adapter blows.
Fire, burns, or electric shock may
result. Refer to the manual for detailed
information of the speciﬁed fuse.
Wipe oﬀ any dust that accumulated
on the power plug.
Fire, burns, or electric shock may
result.
When you connect the AC adapter
to an outlet, do not fail to properly
connect to the outlet.
Fire, burns, or electric shock may
result.
When you disconnect the power plug
from the outlet or cigar lighter socket,
do not pull the adapter cord with
excessive force. Instead, hold the
adapter to disconnect.
Fire, burns, or electric shock may
result.
When inserting and removing from this
terminal, do not subject excessive
force. Insert and remove horizontally.
Fire, burns, injury, or electric shock
may result.
Always remove the power plug from
the outlet or cigar lighter socket when
not using the adapter for an extended
period.
Fire, burns, or electric shock may result.
Immediately remove the power plug
from the outlet or cigar lighter socket
if water or other ﬂuids get into the
adapter.
Fire, burns, or electric shock may result.
Always remove the power plug from
the outlet or cigar lighter socket when
cleaning the equipment.
Fire, burns, or electric shock may result.
CAUTION
Do not touch the adapter for a long
time while being connected to the
outlet or a cigar lighter socket.
Burns may result.
Contents/Precautions
21
Precautions for Mickey
Window Cover
CAUTION
Do not pinch your ﬁngers when
attaching the mickey window cover.
Accidents like injuries may result.
Precautions for nano UIM
card
CAUTION
Be careful of the cut surface when
handling nano UIM card.
Injury may result.
22
Contents/Precautions
Precautions for Using near
Electronic Medical Equipment
WARNING
If you use electronic medical
equipment such as an implanted
cardiac pacemaker or implanted
deﬁbrillator, use this terminal 15 cm or
more away from the implanted cardiac
pacemaker or implanted deﬁbrillator.
Operations of electronic medical
equipment may be adversely aﬀected
by radio waves.
Patients using electronic medical
equipment other than implanted
cardiac pacemakers or implanted
deﬁbrillator (using outside medical
facilities for treatment at home,
etc.) should check the inﬂuence of
radio waves upon the equipment by
consulting the manufacturer.
Operations of electronic medical
equipment may be adversely aﬀected
by radio waves.
You may get closer than 15 cm to
people around you who are incapable
of moving. Set this terminal to radio
signal oﬀ beforehand (Airplane mode
or power oﬀ).
People who are using electronic
medical equipment such as implanted
cardiac pacemakers or implanted
deﬁbrillators may be around you.
Operations of electronic medical
equipment may be adversely aﬀected
by radio waves.
Display
Tempered
Glass
AF coating
Outer case (front)
PC
UV coating
Outer case (back)
PC
Power key/Volume
key
PC
After injection
spray (UV)
Follow the instructions when using
this terminal inside medical facilities.
Earphone/microphone
jack, micro USB
connection terminal
Copper alloy
Nickel +
Gold plating
Camera panel
Tempered
Glass
AF coating
Camera lens
surrounding
AL
Anodic
oxidation,
chemical
corrosion
Flash panel
Transparent
PC
Speaker section
PET
waterrepellent
mesh
Material List
Part
Material
Surface
Treatment
Contents/Precautions
23
Part
Receiver grill
24
Material
STS
Surface
Treatment
Etching
hole +
buﬃng +
PVD
nano UIM card slot
Copper alloy
(NKC286REH)
Nickel +
Pd-Ni +
Gold plating
microSD card slot
Stainless
Nickel +
Gold plating
Battery pack
connection terminal
Ti-Cu
Nickel +
Pd-Ni +
Gold plating
FeliCa/NFC
connection terminal
Copper alloy
Nickel +
Gold plating
Screw
STS
Contents/Precautions
Part
Back
Cover
L40
Battery
Pack
L24
Material
Surface
Treatment
Body
PC
IMD
Terminal
section
Copper + Pi
sheet
Copper
+ Gold
coating
Rubber
gasket
for water
prooﬁng
Silicone
Pad
PSR
Protection
seal part
PC sheet
Print
Body
PC
Lupoy GN1002FS
Etching
(corrosion)
Terminal
section
Nickel 5.0
mic
Gold 0.5
mic
Label
Gray PET
50 mic
Mat
coating
(0.07T)
Waterproof
seal
3M #5559
Part
TV
Antenna
Cable
L01
Material
Surface
Treatment
Earphone/
microphone
jack (top)
Copper
Nickel
plating
Earphone/
microphone
jack (outer
cover)
TPE_
JS400-78A
Non PVC
Cable
TPE_
JS400-78A
Non PVC
Connection
plug (top)
Copper
Gold
coating
Connection
plug (outer
cover)
TPE_
JS400-78A
Non PVC
Part
Mickey
Window
Cover
L01
Material
Surface
Treatment
Outer
cover
polyurethane
ﬁber
Logo print
Window
frame
PC
SN
Deposition,
laser etching
Decoration
Glass
Glass
processing
Interior (Flip
section)
MG
Die-cast
Interior
(Back cover
section)
PC
Spray
coating
Terminal
section
Copper + Pi
sheet
Copper
+ Gold
coating
Rubber
gasket
for water
prooﬁng
Silicone
Pad
PSR
Protection
seal part
PC sheet
Print
Contents/Precautions
25
Handling and Care
General Usage Guidelines
■ Even though KT1601 provides with
waterproofness/dustproofness function, do
not let water or dust come into contact with
the interior of this terminal or adhere to the
optional accessories.
The battery pack, adapter, TV antenna
cable and nano UIM card do not have
waterproofness/dustproofness function.
Do not use them in places with high humidity
such as a bath or where rain may get it wet.
If you carry this terminal close to your body,
moisture from sweat may corrode the internal
parts causing a malfunction. Note that
malfunctions deemed to be caused by water
are not covered by the warranty or impossible
to repair. Since these malfunctions are not
under warranty, even when repair is possible,
it will be done at the user's expense.
26
Contents/Precautions
■ Clean this terminal with a dry, soft cloth
(lens cleaning cloth), etc.
• Rubbing it roughly with a dry cloth may
scratch the display.
• Drops of water or dirt left on the display
may cause stains.
• If this terminal is wiped with alcohol, paint
thinner, benzine or detergent, the printing
may disappear or color may fade.
■ Keep the connector contacts clean with a
dry cotton swab.
Clean the connector contacts with a dry
cotton swab to prevent contacts from
getting dirty which can result in intermittent
connections.
Be careful when cleaning the connector
contacts.
■ Do not place the terminal near air conditioner
outlets.
Condensation may form due to rapid changes
in temperature, and this may corrode internal
parts and cause malfunction.
■ Do not place excessive force on this
terminal, battery pack, etc.
If this terminal is inserted to a full bag, or
placed in a pocket and sat on, the display,
its internal PCBs and battery pack may be
damaged or malfunction.
Also, if an external connection device is
connected to a microUSB connection
terminal or earphone/microphone jack,
damage or malfunction may result.
■ Do not rub or scratch the display with metal.
The display may get scratched and it may
cause malfunction or damage.
■ Read the individual manual attached to the
Options.
Notes about this Terminal
■ Do not press display surface forcibly, or not
operate with a sharp-pointed objects such
as nail, ballpoint pen, pin, etc.
Doing so may cause damage of display.
■ Avoid using in extremely high or low
temperatures.
This terminal should be used within a
temperature range from 5℃ to 35℃ and a
humidity range from 45% to 85%.
■ This terminal may adversely aﬀect ﬁxed
phones, televisions or radios in use nearby.
Use as far as possible from such appliances.
■ Keep a separate record of any information
stored on this terminal and store the copies
in a safe location.
assumes no responsibility for the loss of any
of your data.
■ Do not drop this terminal or subject it to
shocks.
Damage or malfunction may result.
■ Do not insert a microUSB connection
terminal, earphone/microphone jack
crookedly or pull them strongly.
Damage or malfunction may result.
Contents/Precautions
27
■ It is normal for this terminal to become warm
during use or charging. You can continue
using without problems.
■ Do not leave the camera under direct
sunlight.
Discoloring or burn-in of materials may result.
■ Do not use this terminal without its back
cover attached.
Falling oﬀ the battery pack, damage or
malfunction may result.
■ While using the microSD card, do not remove
it from this terminal or turn this terminal oﬀ.
Data loss or malfunction may result.
■ Do not bring any magnetic cards close to
this terminal.
The magnetic data in cash cards, credit
cards, telephone cards, ﬂoppy disks, etc. may
be erased.
■ Do not bring strong magnetic objects close
to this terminal.
Strong magnetism may cause malfunction.
28
Contents/Precautions
Notes about Battery Pack
■ Battery pack is a consumable supply.
Battery life varies depending on usage
conditions, etc., but it is time to change
battery pack when the usage time has
become extremely short even though the
battery pack has been fully charged. Please
purchase a speciﬁed new batter pack.
■ Charge in an environment with the proper
ambient temperature (5℃ to 35℃ ).
■ Battery life may diﬀer depending on the
use environment or degradation level of the
battery pack.
■ Depending on the usage condition, the battery
pack may get swollen when the battery life is
running out. Note that it is not a problem.
■ Be careful about the following points when
storing the battery pack.
• Keeping under fully charged state (right
after the charging ends)
• Keeping under non charged state (consumed
too much to turn on this terminal)
The performance and life of the battery life
may deteriorate.
It is recommended that you store the internal
battery with around 40% battery level.
Notes about the Adapter
■ Charge in an environment with the proper
ambient temperature (5℃ to 35℃ ).
■ Do not charge in the following places.
• Places that are very humid, dusty or
exposed to strong vibrations.
• Near ordinary phone or TV/radio.
■ It is normal that the adapter becomes warm
while being charged. You can continue using
without problems.
■ Use the DC adapter only when the car
engine is running.
The car battery may be exhausted.
■ When using an outlet with a mechanism
preventing unplugging, follow the handling
instructions of the outlet.
■ Do not give a strong impact to the adapter.
Also, do not deform the charging terminal.
Malfunction may result.
Notes about Mickey Window
Cover
■ Do not get it wet.
Up to a certain level, the surface of mickey
window cover is waterproofed due to the
water repellent ﬁnish, however, it is not
complete waterproof. Do not use them in
places with high humidity such as a bath or
where rain may get it wet. If you carry this
terminal close to your body, moisture from
sweat may corrode the internal parts causing
a malfunction.
■ When the mickey window cover gets wet by
water or sweat, wipe it with a soft cloth and
dry it up.
■ Depending on how much you use it, the color
may fade or it may ﬂuﬀ.
■ The usage of Osaifu-Keitai may get
inﬂuenced depending on the usage
environment.
■ Do not put any magnetic cards close to the
mickey window cover since the magnet is
used inside the product.
The magnetic data in cash cards, credit
cards, telephone cards, ﬂoppy disks, etc. may
be erased.
Contents/Precautions
29
Notes about the nano UIM
card
■ Do not put excessive force on the nano UIM
card when inserting into or removing from
this terminal.
■ Note that XXX assumes no responsibility
for malfunctions occurring as the result of
inserting and using a nano UIM card with
other IC card reader/writer.
■ Always keep the IC portion clean.
■ Clean it with a dry, soft cloth (lens cleaning
cloth), etc.
■ Be sure to keep a separate note of the
information registered on the nano UIM card.
XXX assumes no responsibility for the loss
of any of your data.
■ Visit Shop to return the nano UIM card for
the environmental purpose.
■ Do not scratch, touch carelessly or short
circuit the IC portion.
Data loss or malfunction may result.
■ Do not drop or give force to the nano UIM
card.
Malfunction may result.
30
Contents/Precautions
■ Do not bend or put heavy things on the nano
UIM card.
Malfunction may result.
■ Do not insert nano UIM card into this
terminal with labels or stickers attached on.
Malfunction may result.
Notes about the Bluetooth®
Function
■ To secure the Bluetooth® communication
security, this terminal supports the
security function compliant with Bluetooth®
standards, but the security may not be
suﬃcient depending on the settings. Be
aware of the communication using the
Bluetooth® function.
■ Note that XXX is not responsible for data
or information leakage when making data
communications using Bluetooth® function.
■ Frequency band
The frequency band that the devices with
Bluetooth® function and WLAN equipped
uses is written on the insertion part of the
batter pack on the main unit of this terminal.
It shows how to read the label below.
2.4FH1/DS4/OF4
2.4
: This radio equipment uses
the 2400 MHz band.
FH/DS/OF
: Indicates that modulation
methods are FH-SS, DS-SS
or OFDM format.
■ Bluetooth® Device Cautions
The operating frequency band of this terminal
is used by industrial, scientiﬁc, consumer
and medical equipment including microwave
ovens, premises radio stations for identifying
mobile units used in the manufacturing lines
of plants (radio stations requiring no license)
and amateur radio stations (hereinafter
referred to as "another station").
1. Before using this terminal, conﬁrm that
"another station" is not being operated
nearby.
: Indicates that assumed
inducing interference from
distances is 10 m or less.
2. In the event of this terminal causing
harmful radio wave interference with
"another station", promptly change the
location or stop radio wave emission by
turning oﬀ the power, etc.
: Indicates that assumed
inducing interference from
distances is 40 m or less.
3. If you have further questions, contact
"Information Center" provided on the back
cover of this manual.
: The full band between 2,400
MHz and 2,483.5 MHz is
used and the band of the
mobile identiﬁcation device
is avoidable.
Available channels vary by the country.
For use in an aircraft, contact the airline
company beforehand.
Contents/Precautions
31
Notes about Wireless LAN (WLAN)
■ Wireless LAN (WLAN) uses radio waves
to enable data communications between
compatible devices, thus allowing connection
to a local area network from anywhere
within range. However, there is a risk of data
interception by malicious third parties unless
security is established. Users are advised to
assess their responsibilities and accordingly
conﬁgure security settings.
■ Wireless LAN
Do not use wireless LAN near magnetic
devices such as electrical appliances, AV/
OA devices, or in radio waves.
• Magnetism or radio waves may increase
noises or disable communications
(especially when using a microwave oven).
• When using near TV, radio, etc., reception
interference may occur, or channels on the
TV screen may be disturbed.
• If there are multiple wireless LAN access
points nearby and the same channel is
used, search may not work correctly.
• For using WLAN overseas, spots of use
etc. may be restricted depending on
country. In that case, conﬁrm conditions
such as available frequency or regulations
of the country to use it.
32
Contents/Precautions
■ 2.4GHz Bandwidth Cautions
The operating frequency band of the WLAN
device is used by home electrical appliances
such as microwave ovens, industrial, scientiﬁc,
consumer and medical equipment including
premises radio stations for identifying mobile
units used in the manufacturing lines of plants
stations (radio stations requiring no license)
and amateur radio stations (radio stations
requiring a license).
1. Before using the device, conﬁrm that
premises radio stations for identifying
mobile units, speciﬁed low power radio
stations and amateur radio stations are
not being operated nearby.
2. If the device causes harmful radio
interference to premises radio stations
for identifying mobile units, immediately
change the frequency band or stop use,
and contact "Information Center" on the
back cover of this manual for crosstalk
avoidance, etc. (e.g. partition setup).
3. If the device causes radio interference
to speciﬁed low power radio stations
or amateur radio stations, contact
"Information Center" on the back cover of
this manual.
■ 5 GHz Bandwidth Cautions
The terminal can use 3 frequency bands of
5.2 GHz band (W52), 5.3 GHz band (W53),
5.6 GHz band (W56).
• W52 (5.2GHz bandwidth/36, 40, 44, 48 ch)
• W53 (5.3GHz bandwidth/52, 56, 60, 64 ch)
• W56 (5.6GHz bandwidth/100, 104, 108, 112,
116, 120, 124, 128, 132, 136, 140 ch)
Using outdoors in 5.2/5.3 GHz (W52, W53)
outside is prohibited by the Radio Law.
Handling the FeliCa and NFC
Reader/Writer
■ The FeliCa and NFC reader/writer, P2P
function for this terminal handle delicate
signals that require no radio station license.
■ The 13.56 MHz frequency band is used. If
there is another reader/writer, P2P function
near this terminal, keep enough distance
between this terminal and the reader/writer.
Also, make sure that there is no radio station
using the same frequency band nearby.
■ For use in an aircraft, contact the airline
company beforehand. In some countries, use
may be restricted. Conﬁrm regulations etc.
for the country/area before using.
Caution
■ Do not use a modiﬁed terminal. Using a
modiﬁed terminal results in violating Radio
law/Telecommunications Business Act.
This terminal has been complied with
the rules related to technical standard of
wireless equipment stipulated by Radio
law, as well as technical standard of device
stipulated by Telecommunications Business
Act. As a proof, "Technical standard
" is depicted on the
compliance mark
electronic nameplate of the terminal. You
can check the electronic nameplate in the
terminal as follows.
From the Home screen, "Settings" X"About
tablet" X"Regulatory & Safety"
If this terminal is modiﬁed by turning the
screw to the left to disassemble, technical
standard compliance becomes invalid.
Please do not use this terminal during the
time when technical standard compliance
is being invalid, since you are in violation of
Radio law and Telecommunications Business
Act.
Contents/Precautions
33
■ Be careful when using this terminal while
driving.
Using this terminal in your hand while driving is
subject to punishment.
However, absolutely necessary cases such
as rescue of a sick person or maintaining
public safety are exempted.
■ Only use the FeliCa reader/writer function in
Japan.
The FeliCa reader/writer function for
this terminal is compliant with the radio
standards for Japan.
Overseas usage may be subject to
punishment.
■ Do not make unauthorized modiﬁcations to
the basic software.
Repairs may be refused if the software has
been modiﬁed.
34
Contents/Precautions
Waterproofness/
Dustproofness
KT1601 provides waterproofness of IPX7*1
and dustproofness of IP6X*2 with ﬁrmly
attaching the back cover.
This terminal has the IPX7 waterproof function
and IP6X dustproof function even when the
mickey window cover is attached. Even if
the surface of Mickey Window Cover L01 is
processed with water repellent ﬁnish, when it
gets wet, dry it up completely before using.
*1 IPX7 means that a phone keeps
functioning after KT1601 is slowly
submerged to depth of 1 m in static tap
water at room temperature, left there for
30 minutes and then taken out.
*2 IP6X means a protection degree that dust
cannot come in to an inside of phone and
a phone maintains safety after it is placed
in a device with dust in diameter 75 μm or
less for 8 hours, agitated and then taken
out.
What You can Do with
Waterproofness of KT1601
• You can talk without an umbrella in the rain
(for rainfall of 20 mm or less per hour).
• You can wash this terminal by soaking in a
sink of fresh water or in tap water at room
temperature (5℃ to 35℃ ) and gently shaking
it.
- Attach the back cover/mickey window
cover.
- Do not use any brush, sponge, soap,
detergent, etc to wash this terminal.
- Wipe oﬀ moisture on the surface with dry
cloth and drain the water after washing.
→ P40
• You can use it at a poolside. However, do not
pour the pool water over this terminal or soak
it in the pool water.
Before Using
To maintain the waterproofness/
dustproofness, be sure to observe the
following points.
• Make sure to ﬁrmly close the back cover/
mickey window cover. Even a ﬁne obstacle
(one hair, one grain of sand, tiny ﬁber, etc.)
which is put between contact surfaces may
allow water or dust to enter.
• Make sure that the back cover/mickey
window cover is closed ﬁrmly without any
gap.
• Do not pull strongly towards outside when
a strap is attached. The back cover/mickey
window cover may rise up which may cause
the waterproofness/dustproofness function
to no longer be maintained.
Contents/Precautions
35
Attaching the back cover
Conﬁrm the orientation of the back
cover and align it with the main unit,
press 〇 parts ﬁrmly to attach the
back cover
• Make sure that there are not any gaps
between the cover and this terminal.
36
Contents/Precautions
Detaching the back cover
Put your ﬁnger in the groove which
is on the side of the back cover
and hold it up in the direction of the
arrow to detach
Attaching mickey window cover
Conﬁrm the back cover section
orientation of the mickey window
cover and align it with the main unit,
press 〇 parts to attach the mickey
window cover ﬁrmly
Detaching mickey window cover
Put your ﬁnger in the groove which
is on the side of the back cover
section of mickey window cover
and hold it up in the direction of the
arrow to detach
• Make sure that there are not any gaps
between the cover and this terminal.
* Do not peel oﬀ the sticker on the back of
the back cover section. If the sticker is
peeled oﬀ, you cannot use Osaifu-Keitai.
To maintain the waterproofness/
dustproofness, it is recommended to change
the parts once in two years regardless of
malfunction. We will replace the parts by
keeping this terminal, and this will be done
at user's expense. Bring your terminal to a
repair counter speciﬁed by XXX.
Contents/Precautions
37
Precautions
Do not pour or put in liquid etc. other than
water at room temperature shown in the
illustrations below.

Soap/Detergent/ Seawater
Bath powder
Pool water
Hot spring water Sand/Clay
Follow the following precautions to use
correctly.
■ This terminal
• Do not subject this terminal to severe
shocks, or drop it. Deterioration of
waterproofness/dustproofness may result
due to crack or ﬂaw.
• Do not put this terminal in hot water, use it
in a sauna or apply hot air from a hair dryer
etc. to it.
38
Contents/Precautions
• Do not leave water on this terminal. The
external connection terminal may short out.
In cod area, this terminal freezes up and
may cause malfunction.
• To avoid dew condensation when you bring
this terminal from a cold place to a warm
place, wait until this terminal becomes
room temperature.
• Do not use this terminal in the water.
• Never try to charge when this terminal is
wet.
• Do not wash with washing machine etc.
• This terminal does not ﬂoat on water.
• Do not put directly on beach.
- Sand etc. may get inside of earpiece
(receiver), mouthpiece (microphone),
sub microphone, speaker or earphone/
microphone jack. etc., and the volume
may become low.
- Sand etc. may get inside of microUSB
connection terminal or the holes on
earphone/microphone jack etc., and the
waterproofness may not be eﬀective.
- Using this terminal with water drop or
sand etc. may cause noise.
• Do not pick earpiece (receiver), mouthpiece
(microphone), sub microphone, speaker,
earphone/microphone jack or microUSB
connection terminal. The waterproofness/
dustproofness may not be eﬀective.
• Do not leave water drop in the earpiece
(receiver), mouthpiece (microphone),
sub microphone, speaker or earphone/
microphone jack. Malfunction may result.
• Do not leave water drop in microUSB
connection terminal or earphone/
microphone jack. This terminal may short
out.
■ Back cover/Mickey window cover
• The rubber seal of back cover/mickey
window cover is important to maintain the
waterproofness/dustproofness. Do not
peel or damage the seal. Also, avoid the
seal from dust.
• In case the rubber seal of back cover/
mickey window cover is damaged or
deformed, bring it to a speciﬁed XXX repair
center to replace.
• Do not insert a sharp object into a gap of
the back cover/mickey window cover. The
rubber seal may get damaged, and water or
dust exposure may result.
• When opening or closing the back cover/
mickey window cover, do not apply
excessive force on the rubber seal.
• Do not attach or detach the back cover/
mickey window cover when your hands are
wet or when this terminal got wet.
• Replace the back cover/mickey window
cover when either of them gets damaged.
• When back cover/mickey window cover
gets damaged, or when this terminal gets
wet while the cover is open, liquid might
come in. Electrical shock and malfunction
may result. Stop using and turn oﬀ this
terminal. Contact a speciﬁed XXX repair
center.
■ Others
• The supplied accessories and optional
accessories have no waterproofness/
dustproofness.
• Operation in all situation is not guaranteed
for actual use. Note that malfunctions
deemed to be caused by user's fault are
not covered by the warranty.
Contents/Precautions
39
Draining Water
When this terminal gets wet, make sure to
drain the water in the following steps.
• Using this terminal with water drop, the
volume of speaker etc. becomes low and the
quality may change.
40
Wipe oﬀ moisture on the surface
with a dry cloth
Contents/Precautions
Shake this terminal approximately
20 times for each side, ﬁrmly
holding it, until there is no more
water splattering
• Visually conﬁrm if no water drops are on
this terminal.
c
Gently press this terminal to a dry
and clean cloth to wipe oﬀ water
remaining in the gap between
earpiece (receiver), mouthpiece
(microphone), sub microphone,
speaker, earphone/microphone jack,
microUSB connection terminal, key,
etc.
• Do not wipe oﬀ the remaining moisture in
the gaps directly with a cotton swab etc.
Wipe oﬀ water drained from the
terminal with a dry, clean cloth etc.,
and dry naturally
• Water, if any, remaining in the terminal
may ooze up after wiping oﬀ.
Charging
The supplied accessories and optional
accessories have no waterproofness/
dustproofness function. Check the following
before and after charging.
• Check if this terminal is not wet. Never try to
charge when this terminal is wet.
• Do not touch the AC adapter with wet hands.
Electric shock may result.
• Do not use the AC adapter in a place near
water such as bathroom, shower room,
kitchen, washroom etc. Fire or electric shock
may result.
Contents/Precautions
41
Conﬁrmation and Settings before Using
Part Names and Functions
a Earpiece (receiver)
b Proximity sensor* /Illuminance sensor*
(all-in-one)
c Front camera
d Notiﬁcation LED Light
e Hall-IC sensor*
f Display (touch screen)
g Mouthpiece (microphone)
h Strap holder
42
Conﬁrmation and Settings before Using
i Earphone/microphone jack
j Sub microphone
• When speaker phone is in use.
k Sub antenna area*
l Main camera
m Flash
®
®
n Bluetooth /Wi-Fi antenna area*
o GPS/sub antenna area*
p Volume key (up)
q Power key
r Volume key (down)
s Sub antenna area*
mark
u Back cover*
v Speaker
w XXX antenna area*
x microUSB connection terminal
• You can use a SlimPort supported cable
purchased in stores.
Conﬁrmation and Settings before Using
43
*1
*2
*3
*4
*5
Set touch screen to on or oﬀ to prevent
unwanted operations from happening
when your face touches the screen during
calling.
Sense the surrounding brightness and
adjust the screen brightness automatically.
The sensor is used to recognize if the
mickey window cover is open or close.
Antennas are built in this terminal. If you
cover the antenna area with your hand, its
quality may be aﬀected.
Do not peel oﬀ the sticker on the back of
the back cover. If the sticker is peeled oﬀ,
you cannot use Osaifu-Keitai.
Note
• Do not put stickers on any sensor area.
44
Conﬁrmation and Settings before Using
nano UIM card
Nano UIM card is an IC card that stores
information such as your telephone number.
• This terminal uses only nano UIM card. Bring
your mini UIM card, UIM card or XXX card to a
Shop to exchange it.
• If the nano UIM card is not inserted, the
functions such as phone call (sending and
receiving), mail (sending and receiving) and
the data communication cannot be used.
• In Japan, if the nano UIM card is not inserted,
the emergency calls (110, 119, 118) cannot
be made.
• Make sure to turn oﬀ this terminal before
inserting or removing the nano UIM card.
When it is being charged, unplug it from AC
adapter.
• For details about nano UIM card, refer to the
instruction manual for nano UIM card.
nano UIM card Security Codes
You can set the security code named PIN
in nano UIM card. "0000" is set at the time
of subscription. Customers can change PIN
afterwards. For details about PIN of nano UIM
card, refer to "PIN code" (P185).
Inserting nano UIM card
Removing nano UIM card
Detach the back cover (P36)
Take out the nano UIM card straight
in the arrow direction (b)
Detach the back cover (P36)
Remove the battery pack (P47)
Insert the nano UIM card into the
nano UIM card slot all the way to the
end in the arrow direction with the IC
chip facing down
Remove the battery pack (P47)
Remove the microSD card (P199)
Put the ﬁnger in the groove on the
end on nano UIM card slot, and pull
the nano UIM card in the arrow
direction (a)
Conﬁrmation and Settings before Using
45
Note
• When handling the nano UIM card, be
careful to not touch the IC chip, or get it
scratched.
• Note that the nano UIM card may get
damaged if you attach or remove it
forcedly.
• Do not lose the nano UIM card you
removed.
Battery Pack
• Please use the dedicated Battery Pack L24
for this terminal.
• Make sure to turn oﬀ this terminal beforehand
and hold it in your hand when attaching/
removing the battery pack or the back cover
so that the display does not get damaged.
• Do not bend or twist the back cover forcedly
when attaching or removing it. The back
cover may get damaged.
46
Conﬁrmation and Settings before Using
Attaching Battery Pack
Detach the back cover (P36)
With the battery pack
mark facing
up, align the convex part of the
terminal with concave part of the
battery pack correctly, press the
battery pack to the direction a and
push it to the direction b
Removing Battery Pack
Detach the back cover (P36)
Hold the battery pack up in the
direction of arrow mark using the
concave part of the terminal with
your ﬁngertip, and then remove it
Charging
Battery Charge
• For detailed information, refer to instruction
manuals for AC Adapter 05 (optional) and DC
Adapter 04 (optional).
• AC Adapter 05 can be used from AC 100 V
to 240 V.
• The shape of AC adapter plug is for AC 100
V (Japanese speciﬁcation). A conversion plug
adapter for the destination country is required
when using an AC adapter compatible from
AC 100 V to 240 V. Also do not use a
transformer for overseas travel to charge.
• When the terminal is turned ON, you can
operate the terminal even while charging.
However, in that case, charging takes longer
time because of reducing charging volume.
• Do not apply excessive force when inserting
or pulling out the connector. Insert or pull it
out slowly.
• Do not remove the battery pack while
charging.
• When charging with an entirely empty battery
pack, it may take a while to power on this
terminal.
Conﬁrmation and Settings before Using
47
• Make sure to remove it from the power plug
of AC adapter after ﬁnishing charging.
• When charging with unstable rated voltage,
battery may not get charged or charging may
fail.
Do not charge for a long time (for
several days)
• If the terminal is left for a long time after
being fully charged, the battery pack starts
feeding the terminal when the charging is
complete. For that reason, the actual battery
time may shorten and the battery may be
used up. If this happens, please charge it
again correctly. Before recharging, remove
this terminal from AC adapter and reset.
Battery Pack Life
• Battery pack is a consumable supply. The
usage time decreases gradually each time
the battery is charged.
• When the usage time becomes about half
of a new battery, life of the battery pack is
assumed to be over. We recommend you
to replace the battery pack ahead of time.
Also, depending on the usage condition,
the battery pack may get swollen when the
battery life is running out. Note that it is not
a problem.
• Watching TV, etc. for along time while
charging may aﬀect battery pack life.
Charging Time (estimate)
For details about charging time, refer to "Main
Speciﬁcations" (P246).
Usage Time (estimate)
For details about usage time, refer to "Main
Speciﬁcations" (P246).
48
Conﬁrmation and Settings before Using
Charging with AC Adapter
It describes how to charge this terminal with
AC Adapter 05 (optional).
When charging is completed, remove
the power plug of AC adapter from
the power outlet
Remove the microUSB plug of
AC adapter horizontally from this
terminal
■ DC Adapter 04
The DC adapter supplies power to charge
this terminal through a cigar lighter socket
(12 V/24 V) in a vehicle.
Insert the microUSB plug of
AC adapter into the microUSB
connection terminal of this terminal
horizontally with the side of B mark
facing up
Raise the AC adapter power plug
and insert it into power outlet
• During charging, Notiﬁcation LED light of
this terminal turns red color and blinks.
• When charging is ﬁnished Notiﬁcation
LED light turns green color, a ringtone
rings to notify that charging is over, and
is displayed.
Conﬁrmation and Settings before Using
49
Charging with a PC
Power On/Oﬀ
Connect this terminal to a PC by the microUSB
Cable 01 (optional) to charge.
Insert the microUSB plug of microUSB
Cable 01 into the microUSB
connection terminal of this terminal
Power On
Press and hold the power key for
over two seconds
• This terminal vibrates and the lock screen
is displayed after a while.
• After purchasing this terminal, when it is
turned on for the ﬁrst time, follow the onscreen instructions to perform the initial
settings (P64).
• Insert the microUSB plug horizontally with
the side of B mark facing up.
Connect the USB plug of microUSB
Cable 01 to the USB port on PC
• If a request of installing a device driver
appears on your PC, cancel it.
• If the "Install PC programs" screen is
displayed on this terminal, tap "Cancel".
When charging is ﬁnished, remove
the USB plug of microUSB Cable 01
from the USB port on PC
Remove the microUSB plug of
microUSB Cable 01 from this terminal
Note
• Depending on the PC conditions, it may
take a while to ﬁnish charging, or it may
not be able to charge.
50
Conﬁrmation and Settings before Using
Power Oﬀ
Press and hold the power key for
over two seconds
"Power oﬀ"
"OK"
Turning on Backlight
To prevent unwanted operations and to save
power, the backlight turns oﬀ after a certain
time duration you set up and the screen is
locked after then.
Press the power key
• Backlight lights on and the lock screen is
displayed.
• Press power key again to black out the
backlight and lock the screen.
■ KnockON/KnockOFF
Quickly tap the blacked-out screen twice
to light the backlight. Quickly tap the
area with no icon on the Home screen* or
lock screen, or tap the status bar twice
to turn oﬀ the backlight.
* Only operates when the home
application is "Home".
Unlocking Screen
When turning on the power or when displaying
the display, the touch screen stays being
locked.
Swipe the screen up, down, left or
right
• You can change the method of unlocking
the screen (P175).
Note
• When the screen lock is set to "Touch"
or "Swipe", drag or swipe the status bar
downward with the screen locked to open
the notiﬁcation panel.
Note
• Set screen time-out duration and time
duration till screen is locked. For detailed
information, refer to "Screen timeout"
(P173) in "Display" and "Lock timer"
(P177) in "Lock Screen".
Conﬁrmation and Settings before Using
51
Lock Screen
Basic Operations
This terminal adopts touch screen which allows
you to operate by touching the display.
Using Touch Screen
Precautions on using touch screen
a Date & time, current location
b Notiﬁcation information display area
Displays the details of two latest notiﬁcations
and the number of unread notiﬁcations.
c Application shortcut
• Swipe to start the application.
• When you have missed calls, a number
(notiﬁcation number) may be displayed on
the icon.
52
Conﬁrmation and Settings before Using
The touch screen is designed for ﬁnger
touching lightly. Do not press it hard with
your ﬁnger or with sharp objects (ﬁngernail,
ballpoint pen, pin etc.).
The following actions may cause the touch
screen not working properly. Note that it may
cause wrong operations.
• Operating the screen with gloved hands
• Operating the screen with tip of a ﬁngernail
• Operating the screen with an object on it
• Operating the screen with a protective sheet
or seal on it
• Operating when the screen is wet
• Operating when ﬁngers get wet due to sweat
or water
Touch screen operations
■ Flick
: Touch the screen and quickly
sweep your ﬁnger
• Flick so that the screen
scrolls at high speed. While
scrolling, touch the screen
to stop scrolling.
■ Pinch-out
: Touch the screen with two
ﬁngers and then move them
apart
• Pinch out to enlarge the
screen.
The following operations are available on the
touch screen.
■ Tap
: Touch the screen lightly
■ Double tap : Touch the screen lightly twice
in a row
■ Touch and
hold
: Touch the screen for over one
second
■ Swipe
: Flick the screen lightly
• Swipe to scroll quickly.
■ Drag
: Touch and hold down to ﬂick
the screen, and then release
your ﬁnger
• Icons and widgets can be
moved.
Conﬁrmation and Settings before Using
53
■ Pinch-in
: Touch the screen with two
ﬁngers apart and then move
them together, as if pinching
• Pinch in to reduce the
screen.
Back key
Tap to go to the previous screen.
Close a dialog box, an option
menu, the notiﬁcation panel or
the on-screen keyboard.
Home key
Tap to display the Home screen.
Home Touch Buttons
You can change the layout and the color of the
home touch buttons, you can also display/hide
the home touch buttons of the application in use.
• Up to ﬁve home touch buttons can be
assigned.
From the Home screen, "Apps" X
"Settings" X "Display" X "Home
touch buttons"
"Button combination"/"Color"/
"Hide Home touch buttons"
• Follow the on-screen instructions.
54
Conﬁrmation and Settings before Using
History key
• Touch to display the most
recently used applications.
• Touch and hold to display
the current screen or the
option menu performable in
application.
Notiﬁcations key
Tap to displays/hide the
notiﬁcation panel.
QMemo+ key
Tap to start QMemo+ application.
QSlide key
Tap to display QSlide application
selection screen at the bottom of
the screen.
Auto Rotating Screen
This terminal screen automatically rotates to
landscape or portrait views, depending on the
direction in which it is turned.
• Depending on the display screen, the screen
orientation may not change on this terminal.
• Even if this terminal is oriented close to being
level in relation to the ground, the landscape/
portrait view does not change.
From the Home screen, "Apps"X
"Settings" X "Display"
Place a check mark in "Auto-rotate
screen"
Capturing Screen Shot
QSlide Apps
While doing other operations, video, Internet,
messaging, calendar and email can be used via
popup.
• Up to two QSlide apps popup windows can be
displayed on the same screen.
Using QSlide apps
Open the notiﬁcation panel (P70)
Select QSlide apps
"QSlide"
• The QSlide application ﬁeld is displayed
on the notiﬁcation panel.
You can capture the display and save it as an
image.
Press and hold the power key and
volume key (down) for over one second
• You can see the captured screen shots
in "Screenshots" of "Gallery".
• The image may not be able to save
depending on the screen, such as TV
screen (Full seg/1Seg).
Conﬁrmation and Settings before Using
55
a Go to full screen display/previous size and
display it.
Enable this mode to restrict the terminal
settings and functions to save the battery
power.
c Close the QSlide apps.
Press and hold the power key for
over two seconds
"Emergency mode" X conﬁrm the
contents on the screen X "OK"
d Adjust the display size.
Editing QSlide apps
56
Emergency Mode
b Adjust background transparency.
If this is dragged to the left, even if the
QSlide apps screen is touched, it will no
longer respond, but other functions can be
used.
Open the notiﬁcation panel (P70)
Tap "Edit" in the QSlide apps ﬁeld
• You can customize the items displayed
in the QSlide apps sorting or in the
notiﬁcation panel.
Conﬁrmation and Settings before Using
Enabling emergency mode
• Restart this terminal and enable the
emergency mode.
Note
• Even if the emergency mode was enabled
only once, from the next time on the
Home screen, tap "Apps" X "Disaster
kit" X "SAVE" X "OK" to enable the
emergency mode.
• Even when the emergency mode has been
enabled, Wi-Fi® and Bluetooth® function
can also be turned on.
Disabling emergency mode
Press and hold the power key for
over two seconds
"Emergency mode" X "OK"
• From the Home screen of the emergency
mode, tap "Stop saving" X "OK" to disable
the emergency mode.
• Restart this terminal and disable the
emergency mode.
10key keyboard/QWERTY keyboard
● 10key keyboard
It is a keyboard similar to a general mobile
phone keyboard (for multi-tap method). Tap
a key assigned character you want to enter
several times until the target character is
entered.
Character Entry
This terminal has an on-screen keyboard that
is displayed in the touch screen for character
entry.
Character Entry via Onscreen Keyboard
● On-screen QWERTY keyboard
The array is the same as the PC's keyboard.
Enter Japanese in Roman character.
If you tap a text box on the screen, the onscreen keyboard appears in the touch panel.
This terminal provides three types of on-screen
keyboards: an on-screen 10key keyboard, an
on-screen QWERTY keyboard and handwriting
converting keyboard.
Tap
to switch the entry operation such as
character mode change.
Conﬁrmation and Settings before Using
57
a Voice input/Keyboard type key/Handwriting
input key/Clipboard key/Setting key/
Reverse order key
• Switch to Voice input mode.
• Touch and hold down to display keyboard
function button panel.
- Tap
to switch to voice input mode. It
is not displayed when setting not to use
voice input.
- Tap
(QWERTY keyboard)/
(10key
keyboard) to switch "10key keyboard"
and "QWERTY keyboard".
- Tap
to display handwriting input
keyboard.
- Tap
to display clipboard.
- Tap
to display "LG Japanese keyboard"
menu. The voice typing key can be
hidden in the "Keyboard Settings".
is displayed when setting to hide.
* For detailed operations, refer to "Help"
in "Keyboard Settings".
• If using the 10key keyboard,
is
displayed when a character is entered. Tap
to display (reversed order) the previous
character.
58
Conﬁrmation and Settings before Using
b Left cursor key/Arrow key
• The cursor moves to the left.
• It can also narrow the conversion range to
convert.
• Touch and hold down to change arrow key
mode.
c Symbol key/Alphanumeric and Kana key
• Display number keys. Tap again to display
pictograph/symbol/emoticon/pictogram-D
list. For 10key keyboard, right click to
display pictograph/symbol/emoticon/
pictogram-D list.
• Display alphanumeric characters and kana
when " 英数カナ (Alphanumeric and Kana
key)" is displayed.
• Touch and hold down to enable Input
Extension plug-in. (P63)
d Switch character mode
• Switch the character mode.
• Touch and hold down to select "Input
language" and "Keyboard style".
- Tap
(portrait display)/
(landscape
display) to switch "One-handed operation"
and "Split keyboard".
- Tap
return to standard keyboard.
e Delete key
• Delete the character on the left of cursor.
• Touch and hold down to delete the
characters continuously.
f Right cursor key
• The highlight moves to the right.
• Touch and hold down to move it
continuously.
• It can also widen the conversion range.
g Space key/Convert key
• Enter a space.
• " 変換 (convert)" is displayed during
Hiragana input and a list of conversion
candidates is displayed.
h Conﬁrm key/Execute key/Link feed key/
Search key/Next key/Finish key
• Conﬁrm the entered characters or
converted characters.
• If the entered characters or converted
characters have already been conﬁrmed,
this executes the function (execute, line
feed, search, next, ﬁnish) of the text box in
which the characters were entered.
i Shift key
When entering letters, tap to switch to
capital letters.
: Small letters
: Only capital letter with the ﬁrst letter
: All capital letters
j Punctuation mark key
• Input punctuation marks.
• Touch and hold down to display symbol
list.
On-screen 10key keyboard (arrow
key mode selected)
a Arrow (up, down, right or left) key
Move the cursor to up, down, right or left.
b Close
Switch to the on-screen keyboard that has
been displayed before the arrow key mode is
displayed.
Conﬁrmation and Settings before Using
59
c Quick cursor key
Move the cursor to the beginning or the end
of a sentence.
Handwriting converting keyboard
d Select all
Select all the characters.
e Copy key
Copy the selected text.
f Paste key
Paste the copied/cut text.
g Delete key
• Delete the character on the left of cursor.
• Touch and hold down to delete the
characters continuously.
h Select/Deselect key
• Select a target.
• You can change the area with arrow key.
• With deselect key, you can deselect the
selected area.
i Space key
Enter a space.
j Execute key/Line feed key/ Search key/
Next key/Finish key
Execute the functions (execute, line feed,
search, next, ﬁnish) of the input text box.
k Cut key
Cut the selected characters.
60
Conﬁrmation and Settings before Using
a Handwriting area
•
is displayed under the characters when
writing characters. Tap
to display a
list of recognition candidates and you can
modify the character.
•
is displayed on the right side of the
handwriting area when writing characters.
Tap
to continuously input the
characters by handwriting.
b Menu key
• Select Input mode (character type) and
execute mode (handwriting methods).
• Touch and hold down to set the advanced
settings of handwriting input.
• Set execute mode to
to display two
input ﬁelds of handwriting. Enter one
character after the other alternately.
c Symbol key
Display a list of pictographs, symbols,
emoticons and pictogram-D list.
d Keyboard type key/clipboard key/setting
key
• Switch to the software keyboard that
was displayed prior to the handwriting
converting keyboard display.
• Touch and hold down to display clipboard
key and setting key.
e Space key
Enter a half space.
f Left cursor/Right cursor
• Move cursor position.
• Touch and hold down left cursor key to
switch to arrow key mode.
h Delete key
• Delete the character on the left of cursor.
• Touch and hold down this to delete the
characters continuously.
• When you are writing characters in
handwriting input ﬁeld, you can delete all
the characters, one character or a line
within the ﬁeld.
Note
• The key display varies depending on the
entry screen or character mode.
• When you no longer need the keyboard,
you can close it by tapping
. To display
it again, tap the text box on the screen.
g Conﬁrm/line feed key
• Conﬁrm the entered characters or
converted characters.
• If the entered characters or converted
characters have already been conﬁrmed,
this executes the function (line feed) of
the text box in which the characters were
entered.
Conﬁrmation and Settings before Using
61
Changing Character Entry
Settings
on a character entry
Touch and hold down
screen and tap
to display "LG Japanese
keyboard" menu. Tap "Keyboard Settings" to
change the character entry settings.
COMMON SETTINGS
Input
language and
keyboard
type
Set the input language,
screen orientation and the
keyboard type of each input
mode.
Candidate
Set the learning of input
phrases, the correction of
inputting mistakes, and word
prediction.
Auto
capitalization
Place a check mark to
capitalize the ﬁrst letter
automatically when inputting
English letters in applications
supported input function.
Auto
punctuation
62
When alphabetical characters
are input, double tap the
space key to enter a period.
Conﬁrmation and Settings before Using
Touch
feedback
When inputting characters,
set key popup, sound and
vibration, etc.
Voice input
Set if enable voice input or
not.
Handwriting
Set handwriting settings.
10key
keyboard
Set ﬂick input and auto
cursor movement.
Fullscreen
mode
Set to display the dedicated
input screen or not in
landscape view.
Some applications may not
perform properly due to the
restrictions.
ADVANCED SETTINGS
Split
keyboard
Set to display keyboard in
two separate ﬁelds or not in
landscape view.
One-handed
operation
Set if the keyboard is moved
to right or left in portrait view.
EXTERNAL APPLICATION
ABOUT IME
Input
Extension
plug-in
Help
Display Help of LG Japanese
keyboard.
In Help, you can conﬁrm
descriptions of function key
usage, Split keyboard and
One-handed operation mode.
Keyboard
version
Detailed information on
LG Japanese keyboard is
displayed.
Set to use Input Extension
plug-in or not.
• To use Input Extension
plug-in, download
"WnnDictionary" (search in
dictionary) / "WnnBrowser"
(connect to URL) /
"WnnSearch" (search
inside Website). For details
about download, refer to
"Downloads" (P245).
DICTIONARY
User
dictionary
Edit words in personal
dictionary.
Clear
learning
dictionary
Delete all learning
dictionaries.
RESET DEFAULT
Reset to
default
Reset character input
settings.
Conﬁrmation and Settings before Using
63
Initial Settings
First-time Settings When the
Power is Turned On
After purchasing this terminal, when it is
turned on for the ﬁrst time, follow the onscreen instructions to select a language, set
the Google account or perform the service
initial settings.
• Procedures diﬀer depending on the
connection with network and setting skips.
64
Tap "Next" on "Welcome" screen
On the "Software Update" screen,
"OK"
• Tap " 日本語 ( 日本 ) (Japanese (Japan))" to
change language.
• Follow the on-screen instructions to set
up the items below, and tap "Next".
- Wi-Fi®
- Google account
- Google service
- If gathering the log information to LG is
allowed or not
Conﬁrmation and Settings before Using
On the "Welcome to service!"
screen, conﬁrm precautions and
terms of service and mark "Agree to
all" X "Start settings"
• Follow the on-screen instructions to set
up the items below, and tap "Next".
"Start using"
• When the operation guide of Home
screen is displayed, tap "Don't show this
again"/"OK" to display the Home screen.
Note
• You can change the settings later.
• Before setting online service, make
sure that the data can be connected
(LTE/3G/GPRS), or make sure that the
Wi-Fi® network is being connected.
• Even when the Google account has
not been set up, you can still use this
terminal except for the usage of Google
service such as Gmail or Google Play.
Notiﬁcation LED
About Notiﬁcation LED Light
This terminal notiﬁes you of its status via the
lighting up or blinking Notiﬁcation LED light.
Operations of Notiﬁcation LED light is shown
below.
• Slowly blinking green color: Incoming call
• Quickly blinking green color twice: Missed
call/SMS
• Blinking red color: Area Mail notiﬁcation
• Blinking rainbow color: Alarm notiﬁcation
• Lighting up red color: Charging
• Lights up green color: Charging is ﬁnished
Note
• When charging battery, tone changes
while lighting up.
• The lighting up while charging or ﬁnishing
charging operates regardless of whether
this terminal is powered on or oﬀ.
• When receiving a notiﬁcation while
charging or ﬁnishing charging,
notiﬁcation blinking is prior.
Conﬁrmation and Settings before Using
65
Setting Notiﬁcation LED Light
From the Home screen, "Apps"
X "Settings" X "Display" X
"Notiﬁcation LED"
Turn on "Notiﬁcation LED"
Place a check mark in features to
get notiﬁcations
Note
• The notiﬁcation display of Area Mail and
alarm cannot be changed.
66
Conﬁrmation and Settings before Using
Screen Display/Icons
Status Bar
The status bar is displayed at the top of the
screen. The status and notiﬁcations of this
terminal are displayed on the status bar. On
status bar, notiﬁcation icons are displayed on
the left side, and status icons are displayed on
the right side.
Main status icons
Airplane mode activated
Signal strength
nano UIM card locked or nano
UIM card not inserted
No service
Manner Mode (vibrate only)
(grey)
Bluetooth® function is on
Manner Mode (Do not disturb)
(white)
Connecting to a Bluetooth®
device
Alarm is set
During international roaming
3G available/communicating
(arrow is gray in standby, white
while sending/receiving)
LTE available/communicating
(arrow is gray in standby, white
while sending/receiving)
Connecting Wi-Fi®/
communicating
Remaining battery level
Reader/Writer, P2P function is
on
Calling via hands-free
Synchronizing data
GPS is positioning
NFC/Osaifu-Keitai lock is set on
both this terminal and nano UIM
card
NFC/Osaifu-Keitai lock is set on
this terminal or nano UIM card
Battery needs to be charged
(blinking)
Battery is empty
Charging
Conﬁrmation and Settings before Using
67
Main notiﬁcation icons
New Gmail
New Email
New message (SMS)
New Area Mail
Problem with message (SMS)
delivery
New Hangouts message
Incoming call, making a call*,
answering a call*
Receiving a video call or talking
on the phone*
68
Playing music via music
application
Playing music via Media Player
Detected an Open Network (WiFi®)
Connecting to the Wi-Fi® of
unavailable Internet
Connecting with USB
Charging completed
Slow charging
Low free space of memory on
this terminal
Data upload completed
Missed call
Data download completed
New answering memo
Problem with login
New voicemail message
Available to update
New alarm notiﬁcation
Application installation ﬁnished
Upcoming calendar event
Watching 1Seg
Conﬁrmation and Settings before Using
Watching Full seg
Recording TV (Full seg/1Seg)
Recording TV (Full seg/1Seg) is
ﬁnished
More notiﬁcations
Connecting VPN
Wi-Fi® tethering available
USB tethering available
Bluetooth® tethering available
Note
•
is displayed when the terminal is
charged with a PC instead of the AC
adapter (optional).
•
is displayed, the battery charge
speed is slower than the speed when
charging with AC adapter (optional).
•
is displayed when the internal storage
runs out of space.
•
is displayed, you may not be able
to install an application even after
downloading it. Make enough free space
and install the application again.
Connecting Wi-Fi Direct®
Face is recognized via Smart
screen (backlight is lit up)
The application provided by LG
Electronics Inc. needs to update
Battery saver is on
* Displayed when changing to another screen
such as Home screen.
Conﬁrmation and Settings before Using
69
Notiﬁcation Panel
You can conﬁrm the notiﬁcation icons, start
an application or turn on/oﬀ a function in the
notiﬁcation panel.
Viewing notiﬁcation panel
Drag or swipe the status bar
downward
a Date & time
Display date and time.
b Quick setting icon ﬁeld
Switch each function on/oﬀ.
• ON is displayed in aqua color, OFF is
displayed in gray color.
• Scroll to right and left to display the
hidden icons.
• Touch and hold down to display the
setting menu screen of each function.
• Touch "Edit" to customize or sort icons.
c QSlide App ﬁeld
Tap and activate QSlide app (video, Internet,
message, calendar, Email, ﬁle manager,
calculator).
• Tap "QSlide" in the quick setting icon ﬁeld
to display "QSlide".
d Screen brightness adjustment ﬁeld
Adjust the screen brightness via slide bar.
• If turn on "Auto" (icon turns to aqua color),
the screen brightness is automatically
adjusted.
e Incoming call volume adjustment ﬁeld
• Adjust volume of an incoming call.
• Tap
to open volume setting window.
f Notiﬁcation information
Display details of notiﬁcation information.
70
Conﬁrmation and Settings before Using
g Telecommunications carrier name/SIM
carrier name
On the left, the name of currently connected
telecommunication carrier is displayed; on
the right, the carrier's name read from nano
UIM card is displayed.
h Setting button
The "Settings" screen is displayed.
i Delete notiﬁcation
Delete notiﬁcation information and icons.
Some notiﬁcations cannot be deleted.
Viewing notiﬁcation details
Tap the notiﬁcation information on
the notiﬁcation panel
Sorting quick setting icons
Tap "Edit" in the quick setting icon
ﬁeld
Drag the items
to the destination
you want to sort
Customizing quick setting icons
Tap "Edit" in the quick setting icon
ﬁeld
Place a check mark in the desired
item to display
• The notiﬁcation details are displayed in
an appropriate application.
Closing notiﬁcation panel
Drag or swipe the notiﬁcation panel
upward
Note
• Tap
to close notiﬁcation panel.
Conﬁrmation and Settings before Using
71
Customizing icons
You can change the icon design such as
shortcut to use on the Home screen.
Note
• From the Home screen, "Apps" X
"Settings" X "Home screen" X "Select
Home" X usable only when "Home" is
selected.
Changing home application icon
From the Home screen, touch and
hold down a shortcut icon
•
72
is displayed at the upper right of the
icon.
Tap the shortcut icon again
• Icon change screen is displayed.
Tap your favorite icon X "OK"
Conﬁrmation and Settings before Using
Changing to photo icon
You can use a photo from camera and gallery
as the icon for the Home screen.
From the Home screen, touch and
hold down a shortcut icon
•
is displayed at the upper right of the
icon.
Tap the shortcut icon again
From Gallery, select a picture you
want to set up X adjust its size X
"OK"
• Icon change screen is displayed.
"Add new" X drag the frame and set
icon size X "OK"
• Gallery is activated.
Home Screen
Note
• Pinch out the Home screen to enlarge
the wallpaper till it becomes full screen.
Pinch in the wallpaper enlarged till it
becomes full screen to return to the
Home screen.
Viewing Home Screen
Home Screen Management
Adding Home screen
Pinch in on the Home screen
• Home screen list is displayed.
"+"
• Up to seven screens can be added.
Note
a Widget
b Machi-chara
c Apps
d Current location of the Home screen
Flick to right/left to switch the display.
• Touch and hold the Home screen you
want to delete X drag it to the "Remove"
on the top of the screen and delete the
Home screen.
e Dock
Always displayed even when the Home
screen is changed.
Conﬁrmation and Settings before Using
73
Adding an application or widget
From the Home screen, touch
and hold down an area with no
application icon or widget
"Apps" or "Widgets"
Tap a desired application icon or
widget to add
Deleting from the Home screen of an
application or widget
From the Home screen, touch and
hold down a desired application icon
or widget to delete
Drag the item to "Remove" on the
top of the screen
Changing wallpaper
Moving an application or widget
From the Home screen, touch and
hold down a desired application icon
or widget to move
From the Home screen, touch
and hold down an area with no
application icon or widget
Drag the item to the destination
"Wallpapers" X "Gallery"/"Live
wallpapers"/"Multi-photo"/"Photos"
or select a wallpaper from Disney
wallpaper list
Note
• You can drag the icon rightward or
leftward till the edge of the screen to
move it to the next Home screen.
74
Conﬁrmation and Settings before Using
• When "Gallery"/"Live wallpapers"/"Multiphoto" is selected, edit or set the image
range if necessary.
Apps Screen
Viewing Application Screen
From the Home screen, "Apps"
Apps List
Some applications require a separate
subscription (charge).
Applications not included in the folder
Disney マー
ケット (Disney
Market)
In Disney Market is a
convenient portable
application where you
can obtain various
"Disney apps" and
the recommended
information. (P119)
Disney
Cinema
Lines up the best
video contents from
popular live action
movies to animation
works provided by
Disney! This is the
premium video service
only for you.
a "Apps" tab
b "Widgets" tab
c "Search" button
d "Menu" button
e Application icon list
Conﬁrmation and Settings before Using
75
Dlife
Disney Mail
Maker
Disney
Welcome
76
Enjoy dramas, movies,
variety shows and
news which are popular
worldwide anytime
and anywhere! Bestselected programs
are delivered from
"Dlife", a BS channel,
which advises you that
new styles be applied
on your everyday
selections.
A Deco-mail®
converter app which
can be activated from
mail.It activates alone
to create and link
Deco-mail® as well!
KT1601 Special
welcome movies only
for users! Enjoy the
adorable welcome
message voice from
Mickey and Minnie.
Conﬁrmation and Settings before Using
Window
Alarm*
The alarm plays
animation at a
special time. There
is a surprising
performance when
tilting the smartphone.
Window
Weather*
Check the weather,
temperature and
precipitation
probability of the
current location or the
place you set without
opening the mickey
window cover.
Window
Music*
Play or pause the
music without opening
the mickey window
cover.
Window
Steps*
Check the number
of steps, distance
traveled, and calories
burned without
opening the mickey
window cover.
Window
Setting*
Select a Disney
character and
change the window
image, live wallpaper,
ringtone, etc. of the
mickey window cover
collectively.
Tokyo Disney
Resort®
Machijikannabi
An app to check your
present location on
the map of Tokyo
Disneyland/Tokyo
DisneySea and get
various information
such as waiting time
for attraction.
"Happiness
is Here" Live
Wallpaper
Provides children
of all generations
with music, dream
and friendship...
Let's share superb
"Happiness". This
app gives you
live wallpapers of
"Happiness is Here",
the day parade of
Tokyo Disney Resort®.
Fantasmic!
"Fantasmic!" is an
animated wallpaper
of the colossal night
entertainment in which
Mickey who turns into
sorcerer's apprentice
battles on the stage
in the Mediterranean
harbor.
Disney アラーム
(Disney
Alarm)
A cute and convenient
application which has
three functions of
alarm, world clock and
timer with adorable
characters. Also the
widget functions.
Phone
Make a call or set up
call function. (P84)
Messaging
Available to send and
receive SMS. (P104)
Internet
Web Browser
Application. (P113)
Camera
Shoot still images
(photos) and videos.
(P139)
Conﬁrmation and Settings before Using
77
78
Calculator
Four arithmetic
operations are
available. (P156)
Settings
Set various settings.
(P157)
Chrome
Google web browser
application.
Maps
Check current location
or search a destination
with Google Maps.
(P149)
Gallery
View or sort still
images (photos) and
videos. (P144)
YouTube
Play or post videos.
TV
Watch Full seg/1Seg.
(P127)
Music
Sort music ﬁles by
album or artist.
Calendar
View calendar and
manage schedule.
(P153)
Conﬁrmation and Settings before Using
Clock
Set settings of alarm,
timer, world clock
and use stopwatch.
(P150)
QMemo+
You can simply write a
memo without having
to launch Memo
application. You can
also input texts or
illustrations directly on
the captured screen.
(P155)
Osaifu-Keitai
It allows you to pay
money only by holding
the terminal over an IC
card reader in stores
etc. (P122)
ToruCa
An application for
collecting coupons/
convenient information
of your favorite shops.
(P126)
File Manager
Search, edit or delete
the data inside
internal storage,
microSD card or cloud
storage. (P200)
Downloads
Conﬁrm, display or
play the downloaded
data.
Google+
Use Google SNS.
Play Movies &
TV
Purchase videos from
Google Play.
Play Books
Purchase books from
Google Play.
Email
Setup Email account
to send/receive
emails. (P107)
Twitter
Oﬃcial Twitter client
application. Publish
short message on the
site to communicate
with others.
Play Games
Purchase games from
Google Play.
Drive
Save images or videos
to Google Drive or
share them.
Download the
application from
Google Play. (P120)
Photos
View pictures and
movies. You can also
sync with Google
Photos to backup
images and share
them with others.
Hangouts
Chat using Google
Hangouts.
Google
Settings
Make settings for
Google applications.
Docs
Create and edit a
document. You can
also edit with other
users.
Play Store
Google
Google
Search various
information by the
quick search box.
Voice Search
Search via voice.
Gmail
Setup a Google
account and send/
receive emails via
Gmail. (P112)
Conﬁrmation and Settings before Using
79
Sheets
Create and edit a
Sheets. You can also
edit with other users.
• Some of the applications may not show
its name fully below the icon.
Slides
Create and edit a
presentation. You can
also edit with other
users.
Managing Applications
Applications not included in the folder
Instruction
Manual
Instruction manual for
this terminal. Available
to activate a desired
function directly from
the description.
* This application is used in the supplied
Mickey Window Cover L01.
Note
• This application list is preinstalled in
this terminal at the time of purchase.
Some preinstalled applications can
be uninstalled. Those uninstalled
applications can be downloaded again
from the "Play Store", etc (P120).
• If the software is updated, application
contents and icon positions may change.
80
Conﬁrmation and Settings before Using
Adding an application to Home
screen
From the Home screen, "Apps"
Drag it to the desired position and
release your ﬁnger
Touch and hold down the application
icon to add it to the Home screen
• The application is added to the Home
screen.
Uninstalling an application
From the Home screen, "Apps"
Tap the application to be uninstalled
X "Uninstall" X "Yes"
X "Edit/Uninstall apps"
• For applications that can be uninstalled,
is displayed at the upper right of the
icon.
Window Screen
Attach the Mickey Window Cover L01 to this
terminal and close the ﬂip section to display
the window screen. You can use an application
or answer a phone call, etc. through window
screen.
• It is necessary to turn on "Mickey Window
Cover" in the setting menu of this terminal
(P194).
• When the screen backlight is blacked out,
execute the KnockON (quickly tap the screen
twice) to turn on the backlight.
Note
• The notiﬁcation icon will not be displayed
after two seconds.
Available Application
Swipe the main screen up, down, left
or right
Tap the application that you want to use
Main Screen
a Date
b Weather
c Notiﬁcation icon
d Clock
a Camera application
Start the camera to take photos or preview
the images you took.
• Tap the screen or press the volume key
(up)/volume key (down) to take photos.
b Window setting application
Select a Disney character and change the
window image, live wallpaper, ringtone, etc.
of the mickey window cover collectively.
Conﬁrmation and Settings before Using
81
c Music application
Play music, pause, etc.
• Select a music to play via the music
application beforehand.
Available Functions
Answer a call*1
You can answer a voice
call. Also you can end/hold
a call.
• Although notiﬁcation
screen for video call is
displayed, you cannot
answer it. Open the ﬂip
section and follow the onscreen instructions.
Notiﬁcation for
miss calls*2
When there is a missed
call, the notiﬁcation icon
will be displayed.
Notiﬁcation/
preview for
Email and
message*2
When a mail (mail/email)
or message is received,
the notiﬁcation screen
or notiﬁcation icon will
be displayed. Tap the
notiﬁcation screen to
display the preview.
• In the mail preview (mail/
email), the title and
sender of the received
mail are displayed.
d Pedometer application
Check the number of steps, distance
traveled, and calories burned.
• Set up your height, weight, step length
and your objective in advance to count it
even more correctly.
e Weather application
Check the weather, temperature and
precipitation probability of the current
location or the place you set.
Note
• When each applications is being
displayed on the window screen, swipe
the screen to any direction to go back to
the application screen.
• When each applications is being
displayed on the window screen, open
the ﬂip section to display the operation
screen or setting screen of each
application.
• On the window screen, set the resolution
of still image to "3210×3210 (9M)".
82
Conﬁrmation and Settings before Using
Cancel auto
lock
(P194)
Stop alarm
Stop the alarm.
*1
*2
During voice call, the window screen
backlight blacks out two seconds after the
call started.
The notiﬁcation icon of a missed call/new
message/new Email will not be displayed
after two seconds. After the window screen
backlight blacks out, the notiﬁcation icon
will be displayed after lighting up again.
Task Manager
Conﬁrm/end the running application.
• Tap an thumbnail to start the application.
• Scroll/ﬂick the thumbnail to right or left
to delete it from the list.
• Tap "Clear all" to end all the activated
applications.
• Tap "×" on the thumbnail end that
application.
Conﬁrmation and Settings before Using
83
Calling
Making a Call
From the Home screen, "Phone" X
"Dial" tab
a "Phonebook" button
Activate "phonebook" application.
b Tab
"Dial" tab: The dial screen is displayed.
"Recent calls" tab: Recent calls screen is
displayed (P93).
"Favorites" tab: Contacts list added to the
Favorites is displayed.
c Phone number entry ﬁeld
Display an input phone number.
d Dialpad
e Call button
f Menu
Display menu.
g Delete button
Delete a number at the far right. To delete
all numbers entered, touch and hold the key.
h "Register" button
Register the entered phone number to
phonebook.
84
Calling
b
Enter a phone number X
Tap "End call" to end a call
■ When making video call
X "Video call".
Note
• You can make voice calls and video calls
in high quality with VoLTE. To use VoLTE,
you and the other party both need to
meet the following conditions.
- The device supports VoLTE.
- It is within the XXX area (You cannot
use VoLTE outside the XXX area or
during international roaming).
- "Preferred network type" of "Mobile
networks" (P165) is set to "LTE/3G/
GSM(Auto)" or "LTE/3G", and "Call mode
setting" (P97) is set to "VoLTE/3G".
• You can see each other's images while
talking with video call. You can also
switch to voice call.
- When making video calls, there is a
call charge and packet communication
charge. In addition, there is also a
packet communication charge for
incoming video calls.
- Since it is a best eﬀort communication
(the optimum communication speed
changes depending on the network
traﬃc), the image quality diﬀers
depending on the network environment.
- When you could not switch to video
call from voice call, a notiﬁcation will
be shown on the display indicating that
the switching to video call failed, and
voice call will continue.
- As the display processing is diﬀerent
for each phone model, your image
displayed on the terminal for the video
call may diﬀer to what is displayed on
the other party's device.
Calling
85
Entering a Pause
Adding a standby ";"
Use "Add 2-sec pause" or "Add wait" to dial
phone number and additional code in a row
when sending an additional code during a call
is required for bank balance inquiries, ticket
reservation services, etc.
Adding a two seconds pause ","
Automatically dial a service number twosecond pause later after calling.
From the Home screen, "Phone" X
"Dial" tab
Enter a phone number X
wait"
X "Add
• A semicolon ";" is displayed behind the
phone number.
From the Home screen, "Phone" X
"Dial" tab
Enter a menu number of a desired
service X
Enter a phone number X
2-sec pause"
When a conﬁrmation message is
displayed, "Yes"
X "Add
• A comma "," is displayed behind the phone
number.
Enter a menu number of a desired
service X
• After two seconds, the push signal will be
sent automatically.
86
After calling, a message is displayed to conﬁrm
the number you dialed of a desired service.
Calling
• The push signal will be sent
automatically.
Emergency Call
Emergency call
Phone number
Police
110
Fire department or
ambulance service
119
Japan Coast Guard
118
Note
• This terminal supports "Location
notiﬁcation of emergency call". When
dialing an emergency number such as
110, 119 or 118, information of the place
where you called (location information) is
automatically notiﬁed to the agency that
you called (e.g. a police station). Depending
on the location and the signal reception
when you called, the agency may not be
able to conﬁrm your exact location. When
your location information is notiﬁed, the
agency name that you called is displayed
on the screen of this terminal. If you dial
by adding "184" in front of your number to
hide your caller ID, your location information
and phone number are not notiﬁed.
However, if the agency you called
considers your location information and
phone number necessary for important
purposes such as life saving, the
agency can retrieve them regardless
of your mobile settings. In addition, the
introduction area and introduction timing
of "Location notiﬁcation of emergency
call" vary depending on the readiness of
the agency you called.
• When you are making an emergency call
(110, 119 or 118) from this terminal, be
sure to notify that you are calling from a
mobile phone and give both your mobile
phone number and present location
clearly as the police or ﬁre department
may call you back for conﬁrmation. Stay
where you are to ensure that your call
will not be cut oﬀ during reporting. After
making an emergency call, do not turn oﬀ
your mobile phone immediately. Keep it
powered on for about 10 minutes so that
it can receive an incoming call.
• Depending on the area where you make an
emergency call, it may not be connected
to the jurisdictional ﬁre department or
police station.
Calling
87
• In Japan, when nano UIM card is not
inserted in the terminal, the emergency
numbers of 110, 119 or 118 are not
available on the PIN code entry screen or
during PIN code lock/PUK lock.
• If you make an emergency call 110, 119,
118 with call rejection setting enabled,
call rejection setting/Blocking mode will
be disabled.
• You may not be able to make an emergency
call on some networks.
• You can not make emergency calls with
video calls.
Receiving a Call
For Voice Calls
88
Calling
When there is an incoming call
• For VoLTE, "(high-quality sound)" is
displayed.
• Answering memo recording: X "Play
reply message"
• Put a call on hold: X "Put a caller on
hold"
• Stop ring tone, vibration: press power key,
or volume (up)/volume (down)
X "Accept"
• Declining a call: "Reject"
• Rejecting a call: "Reject call with SMS" X
tap a message to send
Tap "End call" to end a call
For Video Calls
When there is an incoming call
• "(high-quality sound)" is displayed.
• Rejecting a call: X "Reject call with
SMS"
• Answering memo recording: X "Play
reply message"
• Put a call on hold: X "Put a caller on
hold"
• Self image is not being sent to the other
party: X "Camera OFF response"
• Stop ring tone, vibration: press power key,
or volume (up)/volume (down)
Incoming Call While
Activating an Application
If there is an incoming call while activating an
application, the popup screen will be displayed
on the top screen. Tap "ACCEPT"/"ACCEPT
VIDEO" to start the call.
• When the popup incoming screen is displayed,
if the caller's name or the phone number
area is tapped, the incoming call screen (full
screen) can be displayed.
■ Incoming voice call
X "Accept video"
X "Accept voice"
• Answer by voice:
• Rejecting a call: "Reject"
Tap "End call" to end a call
■ Incoming video call
Note
• From the Home screen, "Phone" X X
"Call settings" X "Reject SMS" to edit a
reject SMS.
Calling
89
Calling/Sending an SMS to a
Missed Call
When you have a missed call, you can check
the notiﬁcation from status bar.
If
appears in the status bar, drag
or swipe the status bar downward
• Missed call notiﬁcation appears on the
notiﬁcation panel.
Operations during a Call
The following operations are available while
talking on the phone.
• Press the volume key (up)/volume key (down)
during a call to adjust the volume.
For Voice Calls
"Missed call"/"CALL"/"SEND SMS"
• "Missed call": Recent calls are displayed.
• "CALL": Make a call.
• "SEND SMS": Message input screen is
displayed. Compose a message and tap
"Send" to send the message.
a High-quality sound indication
Appears when using a call with high quality
sound of VoLTE.
90
Calling
b Name and phone number
c End
End a call.
For Video Calls
d Dialpad
Display dialpad and send push signal (DTMF
tone).
e Hold*
Put a call on hold.
f Add call*
Call another party.
g Call duration
h Mute*
You voice cannot be heard by the other
party.
i Speaker*
You can hear the other party's voice through
speaker to talk hands-freely.
j Switch to video
Switch to video call.
Tap again to return to the previous state.
Subscription is required for "Call waiting".
*1
*2
a High-quality sound indication
Appears when using a call with high quality
sound of VoLTE.
b The other party's image
Depending on the other party's setting, a
substitute image may be displayed.
• When the other party's image cannot be
received,
appears.
c Your own image
Calling
91
d Switch cameras
Switch the cameras for the image to send
to the other party from the front side or back
side.
e End
End a call.
f Menu
Display the menu for calling screen.
X tap "Switch to voice call" to switch to
•
voice call.
X tap "Dialpad" to turn oﬀ the camera
•
and display the dial screen.
X tap "Switch audio output destination"
•
to switch audio output ports.
X tap "Camera OFF" to stop sending
•
video to the other party.
X tap "Switch video area" to switch
•
"Your own image" display area and "The
other party's image" display area.
g Call duration
h Mute
You voice cannot be heard by the other
party.
92
Calling
Note
• While talking on a video call, tap the video
screen to switch between display video
full screen and cancel full screen.
• While talking on a video call, if the
application is switched from "Phone", the
video will not be sent to the other party
any more.
• While talking on a voice call, if the other
party switch it to the video call, a popup
screen will appear to conﬁrm that it has
been switched to video call. Tap "Allow"
so that it becomes video call screen.
Call Logs
On the Recent calls screen, you can check
logs of dialed calls, received calls, missed calls
in the list.
• Up to 500 items can be displayed.
From the Home screen, "Phone" X
"Recent calls" tab
a Phonebook
Activate "phonebook" application.
b Tab
"Dial" tab: The dial screen is displayed
(P84).
"Recent calls" tab: Recent calls screen is
displayed.
"Favorites" tab: Contacts list added to the
Favorites is displayed.
c Switch logs
• Switch display between Incoming and
Outgoing.
• Tap "All" to display all incoming/outgoing
call logs.
d Name, Phone number, Call date and time
• Tap to open the Recent calls screen. Tap
an item on the Outgoing screen to make a
call, send an SMS, make a video call, save
in the phonebook, show proﬁle screen, etc.
• Touch and hold an item to set "Edit
number before call", "Delete from call log",
"Register as blocked number", "Register to
Favorites", "Search location", etc.
e Menu
Display menu.
f Outgoing, incoming, missed calls
The diﬀerence between voice and video calls
are not shown.
Calling
93
g Voice call key
Make a voice call to the number in the call
log.
Deleting History
From the Home screen, "Phone" X
"Recent calls" tab
X "Delete log"
Place a check mark in the history
to be deleted or in "Select all" X
"Delete" X "Delete"
• The history is deleted and it goes back to
"Recent calls" tab screen.
Answering Memo
When you cannot answer a call, playback reply
message and record an answering memo.
From the Home screen, "Phone" X
X "Call settings"
"Answering memo"
Place a check mark in "Answering
memo"
• "Answer time": Available to set from 0 to
120 seconds.
• "Reply message": Set a reply message
during an incoming call.
Note
• You can record a piece of answering
memo up to 60 seconds with total 20
pieces of answering memos. However,
if there are answering memos which
have been played, when saving the next
answering memo, those which have been
played are deleted from the oldest one so
that the new one can be saved.
• If you answer a video call by answering
memo, the call automatically switches to
a voice call and the message is recorded.
94
Calling
• To check the answering memo you
recorded, drag or swipe the status bar
downward with displayed on the status
bar X "New answering memo", or from
the Home screen tap "Phone" X X "Call
settings" X "Answering memo" X "Play
answering memo". Tap a answering memo
to playback and tap again to stop playback.
• To delete the recorded answering memo,
from the Home screen, "Phone" X "Call
settings" X "Answering memo" X "Play
answering memo" X X "Select all" or
place a check mark in a answering memo
you want to delete X "Delete" X "Yes".
Call Settings
Set call settings.
From the Home screen, "Phone" X
X "Call settings"
Network
service
Voice mail
service*
Set to activate/
deactivate this service.
Call
forwarding
service*
Set to activate/deactivate
this service, or change
forwarding number.
Call
waiting*
Set to activate/
deactivate this service,
or conﬁrm settings.
Caller ID
notiﬁcation
Set caller ID notiﬁcation
or conﬁrm settings.
Nuisance
call blocking
service
Register, delete or
conﬁrm number of
registrations.
Caller ID
display
request
service
Playback a guidance to
inform the caller to show
his phone number, then
end the call automatically.
Second
call
settings*
Set to activate/
deactivate this service,
or conﬁrm settings.
Calling
95
Network
service
Call
notiﬁcation
English
guidance
Guidance such as voice
guidance or Network
service guidance is
played back in English.
Remote
operation
settings
Set remote operation
settings to operate
remotely from a mobile
phone, a ﬁxed line
telephone or an pay
phone.
Public
mode
(power
OFF)
settings
Roaming settings
96
Calling
A missed call is notiﬁed
by SMS when the
power is oﬀ, when you
are out of service or
when it is unavailable
to receive a call.
While the terminal is
OFF or in Airplane mode,
a guidance message
indicating that the
receiver is in a place
where power should be
turned oﬀ is heard on
the caller's terminal and
then the call ends.
(P224)
SOUND & VIBRATION SETTINGS
Phone ringtone
Set phone ringtone.
Vibrate on ring
Set to vibrate or not
with an incoming call.
Dialpad touch
tones
Set to turn on dialpad
touch tone or not when
tapping dial pad.
INCOMING CALL SETTINGS
Answering memo
(P94)
Reject call setting
Reject unregistered
incoming calls.
Reject SMS
Reject an incoming call
and edit reject SMS
message.
OUTGOING CALL SETTINGS
Sub address
settings
Set delimiter when calling
with a sub address. "*"
is a separator for sub
address.
Preﬁx settings
Edit, add or delete a
preﬁx. Register an
international number to
add before calling.
Phonebook
OTHER SETTINGS
Call mode setting
Set whether to use
VoLTE when VoLTE
calling is available.
Call time
Display or reset the
cumulated call time.
Set whether to reset
the cumulated call time
on the ﬁrst day of each
month.
Contact
Inquire about
malfunctions, loss/
theft while overseas.
Also you can call
General inquiries to.
Open source
licenses
Open source license is
displayed.
Manage various contact information such as
names, phone numbers or mail addresses using
"phonebook" application provided by XXX.
• For using the cloud service on phonebook,
phonebook application is required.
• When you activate "phonebook" for the
ﬁrst time (including after resetting the
application), "Use of Cloud" screen appears
and set to use Cloud.
Registering to Phonebook
Register a new contact.
From the Home screen, "Apps" X
"phonebook" X "Contacts" tab
"Register"
* Not available for video call.
Calling
97
a Account
A saving account appears.
• Tap "Set" to select an account.
b Image ﬁeld
Tap "Set" to register an image. To take a
photo, tap "Take photo". To select a saved
image, tap "Select picture".
c Last name, ﬁrst name
d Label key
Select a content label (item).
e Input ﬁeld
Input phone number, mail address, address,
etc.
f Ring tone setting button
g Add other items
Input the address, nickname, memo, etc.
98
Calling
"Save"
Conﬁrming/Using Contacts
From the Home screen, "Apps" X
"phonebook"
• A contact list screen appears.
c Photo set in the phonebook
By tapping the other party's image registered
in the phonebook and then tapping the icon,
you can make a call, create SMS or email, etc.
d Register (P97)
Add new contacts.
• If you have registered more than one
account, select one to add a new contact
to and complete the required items.
e Start/Stop synchronize cloud
f Menu
Display menu.
g "My proﬁle" tab (P102)
Proﬁle screen appears. You can check the
phone number, edit/manage your own proﬁle
information.
h "Group" tab (P101)
Tap to select a group and display the
contacts in groups.
a "Contacts" tab
Display the contact list screen.
b Name registered in the phonebook
i Index character display area
Tap "Index" to display index characters by
which you can search a name in the order of
the Japanese syllabary, alphabet, etc.
j Index
Display the index character display area.
k Search
Search contacts.
Calling
99
b
Tap a contact to conﬁrm or use
• Proﬁle screen is displayed.
• Tap "Edit" to edit contacts.
in phone number ﬁeld to make a
• Tap
call. Or tap the phone number to create
SMS or make video call.
• To create a mail, tap a mail address and
select an application.
Change Displayed Account
on Phonebook
You can set to display or to hide the contacts
included in a group of a speciﬁc account or a
Google account.
100
From the Home screen, "Apps" X
"phonebook" X "Contacts" tab
X "Settings" X "Accounts to
display"
Set an account to display
Calling
Deleting Contact
From the Home screen, "Apps" X
"phonebook" X "Contacts" tab
Tap a contact
X "Delete" X "OK"
Note
• On "Contacts" tab, X "Delete" X "Select
all" or place a check mark in the contact
you want to delete X "OK" X "OK".
Adding/Editing a Group
Adding contacts to group
From the Home screen, "Apps" X
"phonebook" X "Group" tab
From the Home screen, "Apps" X
"phonebook" X "Group" tab
"Add group"
Tap a group X "Add member" X
place check marks in the contacts
to add X "OK" X "OK"
■ To edit a saved group
Tap a group you want to edit X "Edit" X
Edit and then tap "OK".
■ To delete groups
X "Delete group" X place check marks
in the groups you want to delete X "OK"
X "OK".
■ To change display order of groups
"Sort" X Tap a group X Drag the group to
a desired place X "OK".
Note
• Only contacts saved in account or
Google account can be added to the
group.
Deleting contact from group
Select an account X Enter a group
name X Select an icon and color
From the Home screen, "Apps" X
"phonebook" X "Group" tab
"OK"
Tap a group X "Delete member" X
place check marks in the contacts
to delete X "OK" X "OK"
Note
• You can set color or icon to a created
group or change order in the group list
only for the groups saved in account.
Calling
101
Registering My Proﬁle
You can conﬁrm your phone number, and add,
edit or delete your proﬁle information.
From the Home screen, "Apps" X
"phonebook" X "My proﬁle" tab
"Edit" X Enter the required items X
"Save"
Importing/Exporting Contacts
Import contacts or send the contacts as the
contact data (vCard) between nano UIM card
and this terminal.
102
From the Home screen, "Apps" X
"phonebook" X "Contacts" tab
Perform the following operations
X "Import/Export"
■ To import contacts
"Import from SIM card"/"Import from SD
card" X Select a location to save
• If "Import from SD card" is selected,
import contacts from microSD card.
• If you do not set up Google account, a
saving location selection screen does
not appear. It is saved to account.
Calling
• When multiple contacts data (vCard)
are saved in the microSD card, a
phonebook selection screen appears.
Follow the on-screen instructions to
select import method.
■ To export contacts
Tap "Export to SD card" X Select export
method X "OK" X Operate following the
on-screen instructions.
■ To send as contact data (vCard)
"Share phonebook data" X Select a
sending method.
Calling
103
Mail/Web Browser
Sending SMS
SMS
You can send/receive text message to/from
mobile phone number as a recipient.
* For details of available number of characters,
etc, refer to "Short Message Service (SMS)"
on website.
From the Home screen, "Apps" X
"Messaging"
• The "Messaging" screen is displayed.
Tap "To" box to enter a recipient's
phone number
• A list of contacts beginning with the
entered number or name is displayed.
• Tap
to display phonebook and select a
recipient.
104
Mail/Web Browser
Enter a message in "Enter message"
box
"Send"
• The message is sent.
Receiving/Viewing SMS
Note
• Default message application can be
changed to Hangouts. → P182
• While entering a message, X "Insert
smiley" to insert a smiley.
• To notify whether messages (SMS) are
received, from "Messaging" screen X
"Settings" X "Notiﬁcation settings" and
place a check mark in "Notiﬁcations".
• You can also send/receive text
messages to/from customers using
overseas network operators. For available
countries/overseas network operators,
see website.
• To send SMS to users of overseas
network operators, enter "+" X "Country
code" X "Recipient's mobile phone
number". If the mobile phone number
begins with "0", enter the number
excluding the ﬁrst "0". You can also send
an SMS by entering "010", "Country code"
and "the recipient mobile phone number".
From the Home screen, "Apps" X
"Messaging"
• The thread (recipient who send or receive
messages) list is displayed on the
"Messaging" screen.
Tap a thread
• A message appears.
Mail/Web Browser
105
Changing SMS Settings
From the Home screen, "Apps" X
"Messaging"
Notiﬁcation
settings
Notiﬁcation
sound*
Set ring tone when
receiving a message.
Vibrate*
When receiving a
message, set to notify
by vibration or not.
Repeat
alert*
Set to notify
repeatedly or not.
• "Messaging" screen is displayed.
X "Settings"
Change the settings if necessary
Notiﬁcation
settings
Notiﬁcations
Set to display the
notiﬁcation of new
messages or not.
Message
pop-up*
When sending/
receiving a message,
set to display a
new message as a
popup or not. On the
popup screen, you
can reply, display the
sender and message
contents, and clear
the popup screen.
Preview*
106
Mail/Web Browser
Set to display the
message text or not
when receiving a
message.
Storage
Set to delete the
old messages or not
when the received
messages reached
maximum settings in
"Text message limit".
Text message
Set to request a
delivered conﬁrmation
report for all
messages that are
sent or not, and set
the message center.
Conversation theme
Set thread wallpaper
and bubble style.
• Tap "Gallery"/
"Camera" in
"Wallpaper" tab to
set a still image
saved on this
terminal or taken by
the camera as the
thread wallpaper.
Quick message
Add/edit a phrase.
Connect to URL
Set to open a web
page by tapping a
URL in a message or
not.
Send message with
Enter key
When it is not
connected to
Bluetooth® keyboard,
set to send a
message via Enter
key or not.
* Only available to set up when placing a check
mark in "Notiﬁcations".
Email
You can set a POP3- or IMAP-compatible Email
account provided by a general service provider
to send/receive email.
Setting Email Account
Get the necessary information for settings
beforehand from your service provider.
From the Home screen, "Apps" X
"Email"
• The "Select email provider" screen is displayed.
Select a provider
"Manual setup"/"Next"
Input an Email address and its
password, etc.
• Follow the on-screen instructions.
• Select account type when tapping "Manual
setup". Follow the on-screen instructions to
make the settings. For information about
the settings, contact your service provider.
Note
• You can change the settings later. For
details, refer to "Setting account" (P110).
Mail/Web Browser
107
Displaying Received Email
From the Home screen, "Apps" X
"Email"
On "Inbox" screen, tap an email
Creating and Sending Email
From the Home screen, "Apps" X
"Email"
• New emails are received automatically.
• The message is displayed on email
screen.
• "Inbox" screen is displayed.
Tap "To" box to enter a recipient's
email address
• A list of address beginning with the
entered number or name is displayed.
to display phonebook and select a
• Tap
recipient.
Note
• When the acquisition interval of
"Update schedule" is set to "Manual",
new messages will not be received
automatically (P110).
* To receive mails with "Inbox" screen
being displayed, X "Refresh".
• If you have registered more than one
account, on "Inbox" screen, "Inbox" X tap
a registered account and change it.
Enter a subject in the "Subject" box
Enter a message in the message box
(Importance: normal)/
• Tap
(Importance: high)/
(Importance: low)
to set the importance order of mail.
• The email is sent.
Note
•
108
Mail/Web Browser
appears on the right side of "To" box
if an invalid email address is entered.
Check the email address and correct it.
Adding an Account
Changing Email Settings
You can add more than one account on "Email"
application.
From the Home screen, "Apps" X
"Email"
Basic settings
• The "Inbox" screen is displayed.
X "Settings"
"Add account"
Select an email provider
Enter an email address
"Manual setup"/"Next"
• Follow the on-screen instructions.
• Select an account type when tapping
"Manual setup". Follow the on-screen
instructions to make the settings. For
information about the settings, contact
your service provider.
From the Home screen, "Apps" X
"Email"
• The "Inbox" screen is displayed.
X "Settings" X "General settings"
Change the settings if necessary
Set default
account
Set the default account
settings.
Select
download
storage
Select a download
destination for the
attached ﬁles.
Email preview
Set the number of lines
to show an email preview.
Conversation
view
Set to display the sent/
received mails of the
same subject on one
thread or not.
Split view
Set to split view or not
when displaying by
landscape screen.
Mail/Web Browser
109
Set to display the image
which is linked to an
email or not.
Ask before
deleting
Set to display the
conﬁrmation screen or
not when deleting an
email.
Autoadvance
Select a screen to
display after deleting/
moving an Email.
Resize image
Set the ﬁle size of an
image attached to an
Email.
Account
name
Set account name.
Your name
Set user name.
VIP settings
Even when the Email
notiﬁcation is set to OFF,
the received mails are
notiﬁed from the senders
that have been registered
on the VIP list.
Use
signature
Set to use signature or
not.
Signature
Edit signature contents.
Trusted
certiﬁcates
110
Setting account
Load linked
images
A trusted certiﬁcate is
displayed.
Mail/Web Browser
From the Home screen, "Apps" X
"Email"
• The "Inbox" screen is displayed.
X "Settings" X tap an email
account
Change the settings if necessary
DISPLAY NAMES
SYNC, SEND & RECEIVE
Update
schedule
Set retrieve interval for
inbox.
Number of
emails to
show*1
Set the number of emails
to display.
Days to sync
email*2
Set the number of days
to synchronize the
Emails.
Message size
limit
Set message size.
Delete from
server*1
Set the timing to delete
from server.
Download
over Wi-Fi*2
Set to download the
attached ﬁle or not when
Wi-Fi® is connected.
File size
for Wi-Fi
download*2
When "Download over WiFi" is ON, set ﬁle size for
ﬁles downloaded via WiFi®.
Account &
sync
Synchronize data with
other accounts or delete
accounts.
Auto resend
times
Set the number of times
for auto sending.
Always Cc/
Bcc me
Set to always add
yourself to Cc/Bcc or not.
Security
settings
To protect Emails, set
a digital signature or
encryption.
NOTIFICATION SETTINGS
Notiﬁcations
Set to show the
notiﬁcation or not with an
incoming email.
Notiﬁcation
sound
Set notiﬁcation sound.
Vibrate
Set to vibrate or not with
an incoming email.
SERVER SETTINGS
Incoming
server
settings
Conﬁrm the incoming
server settings.
Outgoing
server
settings
Conﬁrm the outgoing
server settings.
REMOVE
Remove
account
*1
*2
Delete an account.
Displayed only with POP3 account.
Not displayed with POP3.
Mail/Web Browser
111
Creating and Sending Gmail
Gmail
Gmail is an online email service of Google. You
can send and receive emails by using Gmail
preinstalled in this terminal.
• To use Gmail, you need to set up the mail
address. When the mail address setting
screen is displayed, follow the on-screen
instructions to set up before implement the
Gmail.
• For details on Gmail, from Gmail screen,
Tap "Help & feedback" to refer.
Opening Gmail
From the Home screen, "Google" X
"Gmail"
• When a screen which shows new
functions of Gmail is displayed, follow the
on-screen instructions to operate it.
112
Tap an email you want to read
• Content of the selected email appears.
Mail/Web Browser
From the Home screen, "Google" X
"Gmail"
Enter email address in "To" box
Enter a subject in the "Subject" box
Enter a message in the "Compose
email" box
• The mail is sent.
Browser
Browser allows you to view web pages in the
same way that you do on a PC.
On the terminal, web browser can be used via
a packet communication or Wi-Fi® connection.
Opening Browser
From the Home screen, "Internet"
• A web page is displayed.
a Search box
Tap to display the search box. Enter the text
or URL to search, and a list of web pages or
search candidates that match the entered
characters are displayed.
Tap one from the list or entering the entire
URL, and tap "Go" to display the web page.
b Maximum/minimum screen
Tap
to change to minimum window
display.
Then tap
to change it to full screen
display.
c Switch windows
It switches to the window you selected to
access to a web page in case of multiple
windows. Tap
to close the window.
d Menu
Display browser menu (P115).
Note
• When search box and icon are not
displayed on the top of the screen, scroll
the browser screen downward to show
them.
• Pinch out or pinch in a web page to zoom
in or zoom out the display.
• Even the web page is made for a PC, you
can also zoom in, zoom out or scroll the
display. For detailed information, refer to
"Touch screen operations" (P53).
• Depending on the format and content
of a web page, the operations can be
diﬀerent.
• Touch and hold down the text of a web
page to select.
The following menus are displayed when
the text is selected.
- "Select all": Select the entire text inside
a web page.
- "Copy": Copy text.
Mail/Web Browser
113
- "Scrap": The text and web page link are
saved in QMemo+ (P155).
- "Share": Send text through application
or service.
- "Find": Search text inside web page.
- "Web search": Search the text in
websites.
• For details about ﬁle formats available
to display and play back on this terminal,
refer to "File format" (P249).
114
Mail/Web Browser
Searching a web page by voice
From the Home screen, "Internet" X
tap the search box
• "Speak now" is displayed.
Speak the keyword(s) clearly to the
microphone
• The search keyword result list is
displayed.
Tap a search keyword result or "Go"
Tap a web page
• The keyword is input in the search box,
and the web pages with the keyword in it
are listed.
• The selected web page opens.
Using Browser Menu
Opening incognito tab
You can browse web pages without leaving
any browsing history or searching history.
From the Home screen, "Internet" X
• A new tab opens and the description of
secret mode is displayed.
Input the search words or URL in
the search box and display the web
pages
Note
•
is displayed in Search box.
• It does not leave any history with the
web page opened in secret tab. Cookie
record is deleted when closing the tab.
The downloaded ﬁles and the web pages
added to bookmark can be saved.
From the Home screen, "Internet" X
Forward
The next web page is
displayed.
New tab
A new window opens and
the most frequently used
websites are displayed.
Bookmarks
"Bookmarks" tab is
displayed.
Add to
bookmarks
Add a web page to
bookmarks.
Homepage
Home page is displayed.
Share
Use an application or
service to share web page.
Find on
page
Enter a keyword to search
strings inside the web
page.
Desktop
view
Website of PC version is
displayed.
Mail/Web Browser
115
Save for
oﬄine
reading
Save a webpage. Tap
X X "Saved pages" tab
to display the saved web
page.
Capture
plus
Capture the entire web
page. You can check
the captured image from
"Capture plus" in "Gallery".
Print
Print out a web page,
or save it as a PDF ﬁle
(P212).
Settings
The setting screen is
displayed (P117).
Exit
Exit a web page.
Using Bookmark and History
Add a web page to bookmarks to quickly
access to the web page.
You can display browsing history to view web
pages your visited previously.
Adding bookmark
From the Home screen, "Internet" X
display the web pages to be added
to the bookmark
X "Add to bookmarks"
Edit name, URL or other items if
necessary, and tap "OK"
Opening a web page added to
bookmarks
116
Mail/Web Browser
From the Home screen, "Internet" X
X "Bookmarks"
Tap a bookmark to display
Changing Browser Settings
From the Home screen, "Internet" X
X "Settings"
Change the settings if necessary
General
Set home page, tool bar
and form auto input.
Privacy and
security
Set to display/hide
the warning screen,
clear cache or browser
histories, Cookies, etc.
Screen and
text
Adjust the screen or font
size.
Advanced
Set JavaScript validation,
popup block, download
storage selection, etc.
or return to the initial
settings.
Bandwidth
management
Set image reading.
Mail/Web Browser
117
118
Mail/Web Browser
Apps
Disney Market
With Disney Market, you can download various
contents for free such as "Disney アプリ (Disney
apps)" or Deco-mails®, or view recommended
Disney information.
From the Home screen, "Disney マー
ケット (Disney Market)"
Follow the on-screen instructions to
operate
Note
• Contents provided in Disney Market are
service provided by The Walt Disney
Company (Japan) Ltd.
• Subscription to sp-mode is required to use
Disney Market.
• Packet communication charges are
incurred separately.
• Part of the contents are charged in the
Disney Market.
• If you subscribe charged mobile services
on a monthly basis such as Disney
oﬃcial mobile website or smartphone
contents provided by Disney, you are
charged separately unless you cancel the
subscription by yourself.
To cancel, from the Home screen, "Disney
X " マイペー
マーケット (Disney Market)" X
ジ (My page)" X " マイメニュー (My menu)"
X " 退会 (Cancel)" and follow the on-screen
instructions to operate.
• Charges may be incurred for using part of
options for games in some apps.
• Subscription to the membership for Disney
Market is required to use apps provided by
Disney (including pre-installed apps).
■ Signing up for Disney Market and inquiring
about Disney apps or content
• Disney Internet Service Customer Center:
0570-00-1937
• Business hours: 10:00 to 17:00 (Monday
through Friday excluding national holidays,
new years holidays)
Apps
119
* Contact 045-522-1098 from a PHS/part
of IP phones/outside of Japan or refer to
(http://disney.jp/dmd/faq/) (in Japanese
only).
Play Store
Google Play enables you to access applications
and games you like and download them to
install into this terminal.
• To use Google Play, Google account is
required (P187).
Installing an Application
From the Home screen, "Play Store"
Tap "INSTALL" (for free applications),
or Amount ﬁeld (for paid applications)
Search application X tap the
application that you want to download
• The displayed content diﬀers depending
on the application.
• If the application needs to access data and
functions on this terminal, the functions
used by the application are displayed.
120
Apps
"ACCEPT"
• For paid applications, if you have not
registered a payment method with your
account, additional screen for payment
method is displayed. Tap it and follow the
on-screen instructions.
• You are taking responsibility when using
applications on this terminal starting
from downloading and purchasing the
applications. Pay special attention to
application that is accessing multiple
functions or large amount of data.
• If download or installation is ﬁnished
normally, the notiﬁcation icon will be
displayed in the status bar. Display the
notiﬁcation panel and tap the application
name. The installed application opens.
Purchasing an application
• Payment for application is only once. After
downloading, you do not need to pay every
time when you uninstall or download again.
• If you have another Android device that is
using the same Google account, you can
download for free on that device once you
purchased the application.
• After purchasing application, you can request a
refund within a speciﬁed time. The application is
deleted, and it will not be charged. Requesting
a refund is available only once for the ﬁrst
time of purchasing each applications. After
requesting a refund to a purchased application,
and purchasing the same application again, you
cannot request a refund.
• If you need more information about Google
X "Help & Feedback" when Google
Play,
Play screen is open.
Note
• Be sure to check the security of
application, and then install it at your own
risk. This terminal may be infected with a
virus and the data may be damaged.
• XXX is not liable for malfunctions, if any,
caused by the application you installed.
In that case, you need to pay for repair
even when it is within guarantee period.
• XXX is not liable for any disadvantage
brought to you or any third party due to
an application you installed.
• Some applications automatically
perform packet communications. Packet
communication is kept active unless you
disconnect or it is timed out.
• If you need more information about
X "Help & Feedback"
Google Play,
when Google Play screen is open.
Apps
121
Uninstalling an Application
122
From the Home screen, "Play Store"
X "My apps" X tap the application
that you want to uninstall
"UNINSTALL"
"OK"
• When the "REFUND" is not displayed on
paid application, the trial period is expired.
Apps
Osaifu-Keitai
You can use "Osaifu-Keitai compatible service"
for payment or coupon by just holding this
terminal and against a store reader, or " かざして
リンク対応サービス (Kazashite-Link services)" for
accessing information by holding it against home
electrical appliances, smart poster, etc.
Electronic money and point values can be stored
on IC cards, or on nano UIM card.
Additionally, you can check credit, balance or
points of your electronic money, as well as lock
Osaifu-Keitai to prevent any loss.
For details about Osaifu-Keitai, refer to
website.
• To use Osaifu-Keitai compatible services, it is
necessary to make settings through sites or
applications.
• If this terminal has a problem, data*1 in the IC
card and data*2 in the nano UIM card may be
lost or changed (if this terminal needs repair,
terminals with data cannot be accepted, so
principally the user needs to delete the data).
For more information about reissuing and
restoring data, and support for saving and
transferring data, contact the Osaifu-Keitai
compatible service provider. Please use
Osaifu-Keitai compatible services that provide
backup services to save you important data.
• We are not responsible for damages such
as lost or changed data in the IC card and in
the nano UIM card, or other damages related
to Osaifu-Keitai compatible services in any
cases including terminal malfunction or
terminal replacement.
• If a terminal is stolen or lost, please
immediately contact your Osaifu-Keitai
compatible providers for what to do.
• Attach the Back Cover L40 or the Mickey
Window Cover L01. NFC/FeliCa antenna is
equipped on the back cover or mickey window
cover.
*1 Data which is stored on the IC cards that
Osaifu-Keitai compatible terminals are
equipped with
*2 Data which is stored on nano UIM card
Using "Osaifu-Keitai
Compatible Service"
To use Osaifu-Keitai compatible services, from
the Osaifu-Keitai compatible site, download the
application for Osaifu-Keitai and then conﬁgure
settings. Some services do not require
downloading of an Osaifu-Keitai compatible
application.
From the Home screen, "Apps" X
"Osaifu-Keitai"
• Obtain service information and update a
service list.
• Initial settings may be required at the
ﬁrst startup. Follow the on-screen
instructions.
Tap a service that you want to use
Set service settings
Hold
mark over the reader
• Communication with the reader is
performed.
Apps
123
Note
• You can read/write data with reader
without activating Osaifu-Keitai
compatible application.
• It is available even when you turn oﬀ
power of this terminal. It may become
unavailable if you have not turned on this
terminal for a long period of time or the
battery level is low.
• Osaifu-Keitai compatible services can be
used even if the nano UIM card PIN code
cannot be unlocked, or if the PIN code is
locked.
• If sp-mode was not subscribed to, please
note that some of the functions of
Osaifu-Keitai compatible services might
no longer be able to be used.
Using " かざしてリンク対応サービ
ス (Kazashite-Link services)"
Activate "Reader/Writer, P2P" in advance. →
P168
124
Skim a device with NFC module
inside or a smart poster over the
mark on the terminal
Apps
Notes on Holding over Device
Notes when holding over reader, NFC Modules
built-in device, etc.
• When holding over
mark, bring it close to
the device slowly.
• Hold the
mark parallel to the center of
reader. If it cannot be scanned even with it
held in front of the center scanner, slightly
lift up this terminal, or move it backwards/
forwards or to the left/right.
• When there is a metal object between the
mark and the device, reading may fail. Note
that putting this terminal into a case or cover
may aﬀect communication performance, take
it out from case or cover.
Locking Osaifu-Keitai
Use "NFC/Osaifu-Keitai lock" to lock the
Osaifu-Keitai service from being used. Locking
of Osaifu-Keitai is diﬀerent from screen lock
and UIM card lock.
From the Home screen, "Apps" X
"Osaifu-Keitai"
"Lock Settings" X Enter a password
X "OK"
• Setting password is required for the
ﬁrst activation. Follow the on-screen
instructions to set password.
■ To unlock
"Lock Settings" X Enter the password X
"OK".
■ To change password
From the Home screen, "Apps" X
"Settings" X "More..." X "NFC/OsaifuKeitai settings" X "Lock password
change" X input the current lock
password X input a new lock password
X "OK" X input the new lock password
again X "OK".
Note
• While conﬁguring "NFC/Osaifu-Keitai
lock",
or
are displayed on the status
bar.
• This cannot be unlocked even if the
power is shut oﬀ.
• If the battery runs down during the
conﬁguring of "NFC/Osaifu-Keitai lock",
"NFC/Osaifu-Keitai lock" can no longer be
unlocked. Be careful of the battery level.
Make sure to unlock "NFC/Osaifu-Keitai
lock" after charging this terminal. When
the power is oﬀ, cancel "NFC/OsaifuKeitai lock" after ﬁnishing charging.
• In order to be able to use the OsaifuKeitai menu during the conﬁguring of
"NFC/Osaifu-Keitai lock", the lock needs
to be unlocked.
• The password for "NFC/Osaifu-Keitai
lock" is not deleted even if the terminal is
initialized.
• Since the lock might need to be unlocked
and the password might need to be
changed, please write down and store the
password for "NFC/Osaifu-Keitai lock".
Apps
125
ToruCa
ToruCa is an application that can be used to
collect coupon tickets, useful information etc.
from your favorite stores. It can be obtained
by many ways such as mail, website download,
Bluetooth® and IC tag. Update the obtained
ToruCa to the latest information simply.
• For details of ToruCa, refer to website.
126
From the Home screen, "Apps" X
"ToruCa"
Apps
Note
• Packet communication fee may incur when
acquiring, displaying or updating ToruCa.
• When obtaining ToruCa via Bluetooth®, it
is required to turn on the Bluetooth® of
ToruCa application.
• When obtaining ToruCa via IC tag, you
need to place a check mark in "Reader/
Writer, P2P" of this terminal. → P168
• Depending on the settings of contents
provider, the following functions may not
be able to use.
Update, ToruCa sharing, Viewing maps,
Acquiring from readers
• ToruCa may not be acquired from readers
when Osaifu-Keitai is not initialized.
TV (Full seg/1Seg)
TV is an application that allows you to view
Full seg or 1Seg, switching depending on the
reception of the airwaves. Also, interactive
service using communication function of mobile
devices and receiving detailed information are
available.
With Full seg, you can view Digital Terrestrial
TV Broadcasting service in high-vision quality.
With 1Seg, you can view Digital Terrestrial TV
Broadcasting service for mobile devices.
For details on Full seg/1Seg service, refer to
the website below.
The Association for Promotion of Digital
Broadcasting Website:
http://www.dpa.or.jp/english
Before Using Full seg/1Seg
Full seg/1Seg is a service provided by TV
broadcast companies (broadcast stations).
Receiving video and audio is free. For more
information about NHK reception fees, contact
NHK.
There are two types of information displayed in
the data broadcasting area: "Data broadcasts"
and "Data broadcast sites".
"Data broadcasts" are displayed by broadcast
wave for both video and audio, and "Data
broadcast sites" are displayed by connecting
to the site provided by the TV broadcasting
company (broadcast station) through the data
broadcast information.
To view "Data broadcast sites", etc. packet
communication fees are charged.
Information fees may be required to access
some sites.
Apps
127
Broadcast Wave
Full seg/1Seg is one of broadcast services,
and receives radio waves (broadcast waves)
that are diﬀerent from XXX service. Therefore,
it is not possible to receive at locations where
broadcast waves do not reach or during time
zones where broadcasting is oﬀ regardless of
whether you are in an area with XXX service.
In addition, in areas with digital terrestrial TV
broadcast service, reception may be poor or
may not be available in the following locations.
• Locations far from the broadcasting tower
where the broadcast wave is sent
• Locations where waves are blocked by
landscape or buildings such as in the
mountains and or near buildings
• Locations where waves are weak such as
tunnels, underground, and building basements
Changing the direction of included TV Antenna
Cable L01 or moving to other location may
improve signal reception.
128
Apps
TV Antenna Cable L01
When watching TV (Full seg/1Seg), connect
the TV Antenna Cable L01 included in this
package with this terminal.
Insert the connection plug of the
TV Antenna Cable L01 into the
Earphone/microphone jack of this
terminal
• Insert the plug all the way till the end.
You may not be able to hear the click if it
is not inserted till the end.
• Insert an earphone/microphone plug of
3.5 mm diameter into the earphone/
microphone jack of the TV Antenna Cable
L01.
• Insert an earphone/microphone plug into
the earphone/microphone jack of the TV
Antenna Cable L01, and then connect the
TV Antenna Cable L01 into this terminal.
• Remove the TV Antenna Cable L01 from
this terminal when it is not being used.
Note
• The TV (Full seg/1Seg) sound is not
output on the Bluetooth® devices that do
not support SCMS-T format.
• When the TV Antenna Cable L01 alone is
connected, the sound will not be output.
Output the sound by any of the following
methods.
- When using a Bluetooth® device, ﬁrst
connect the TV Antenna Cable L01
to this terminal and then connect the
Bluetooth® device. For details, refer
to "Pairing/Connecting with Other
Bluetooth® Device" (P205).
- When using the speaker of this terminal,
ﬁrst connect the TV Antenna Cable L01
to this terminal, and tap
and then .
• When both of the earphone/microphone
and Bluetooth® device are connected to
this terminal, the sound is output from
the device that has been connected
later.
• TV (Full seg/1Seg) is not compatible with
the following functions due to copyright
protection.
- Video output via SlimPort supported
cable or SlimPort supported accessory
- Video output via Wi-Fi®-display
- Screenshot
- QMemo+
- QSlide apps
Apps
129
Watching TV (Full seg/1Seg)
From the Home screen, "Apps" X
"TV"
• The TV (Full seg/1Seg) watching screen
is displayed.
• When launching for the ﬁrst time, you
need to select your viewing area.
How to use the watching screen
130
Apps
a Program title and broadcast time
b Program details
Tap it to display the program title, channel,
broadcast time and the overview.
c Screen lock button
Lock the TV watching screen when it is full
screen display. And then tap
to unlock it.
d Speaker ON/OFF button
e Menu
A menu is displayed.
f TV broadcast area
• Swipe upward/downward on the right part
to change the volume.
• Swipe upward/downward on the left part
to change screen brightness.
• Swipe leftward/rightward to switch
channels.
• Tap the watching screen (horizontal) to
change to the watching screen (horizontal
full screen).
• Tap the watching screen (horizontal full
screen) to change to the watching screen
(horizontal).
g Channel area
• When watching a channel that supports
multiservice, tap
to select a service.
• Tap / to switch channel.
• Touch and hold / to search the
available channels.
h Volume button
i Data broadcast button
Tap to display the data broadcast area
(P132).
j Channel list/program list area
Tap the channel list/program list switch
button to display the channel list/program
list.
■ Channel list
• Tap a channel to switch it.
• Touch and hold a channel to select the its
channel services.
■ Program list
•
is displayed in the program you are
watching.
• Tap a program to display its details.
"Reservation" X "Record" / "Watch" to
reserve recording/watching.
is
displayed in the program you reserved for
recording/watching.
Apps
131
k Record/Stop button
Tap to start/stop recording.
• Stop button does not function for the ﬁrst
ﬁve seconds after starting recording.
l Receiving mode button
Tap the button to switch "Auto" / "Full seg" /
"1 seg".
m Channel list/program list switch button
"Using Program Schedule" → P134
n Subtitles
Display caption when viewing a closecaptioned program.
132
Apps
Viewing the data broadcast screen
Tap data broadcast button on the TV (Full
seg/1Seg) watching screen to display the
data broadcast screen.
e Data broadcast operation button
■ 1Seg
• Adjust the cursor with " ▲ "/" ▼ " and tap
"OK" to select an item. The broadcast data
of the link displays.
• Tap
to return to the link.
a TV broadcast area
Tap to display the TV (Full seg/1Seg)
watching screen.
b Subtitles
Display caption when viewing a closecaptioned program.
c Scroll bar
Swipe or drag up to display the data
broadcast in full screen mode.
■ Full seg
• Align the cursor with an item via "∧"/"∨"/
"＜"/"＞", and tap "OK" to select an item.
The data broadcast of the link will be
displayed.
• Tap
to display Num. To go back to the
previous display, tap
• Tap
to decrease the data broadcast
operation button and display it. To go back
to the previous display, tap .
• Tap
to return to the link source.
• Tap
to end the data broadcast screen.
• Tap ● (blue/red/green/yellow) to operate
the corresponding color.
d Data broadcast area
Tapping directly on the content of the data
broadcast may allow you to operate.
Apps
133
Using Program Schedule
You can view a TV guide of both terrestrial TV
programs and BS digital broadcast programs.
You can make reservations for recording and
viewing.
From the Home screen, "Apps" X
"TV"
Tap the button to switch channel
list/program list
• Program list is displayed.
134
Tap a program
• Program information is displayed.
• "Reservation" X "Record" / "Watch" to
reserve recording/watching.
Apps
Watching Recorded
Programs
Recorded programs can be watched and
deleted by using the Television box.
From the Home screen, "Apps" X
"TV"
Tap the program being watched
X "TV box"
Deleting recorded programs
From the "TV box" screen, tap
"Delete" X "Yes"
Place a check mark to the program
to be deleted
Reserving Recording/
Watching
Note
• From the "TV box" screen, X place a
check mark in "Select all" X "Delete" X
"Yes" is tapped, all recorded programs
can be deleted.
• From the "TV box" screen,
"Title"/"Date"/"Size" is tapped, the
recorded programs can be rearranged.
• Tap
on the "TV box" screen to check
the used space and free space of the
internal storage, and the estimate
recording time.
Choose start time/end time and a channel and
reserve a program to record/watch, then follow
the settings to start recording/watching.
From the Home screen, "Apps" X
"TV"
X "Reservation list"
X set the settings if necessary
Reservation
type
The record and watch
presets can be switched.
Mode
Select a mode to receive data.
Available
recording
time
Check the estimate recording
time.
Channel
Select channel.
Start
Time
Set the start date/time.
End Time
The ending date and time
can be set.
• Can only be set when the
presetting recording.
Apps
135
d
Program
name
Enter the program name.
Repeat
Set a recording/viewing
reservation repeatedly at the
same time period on a speciﬁc
day of the week.
• If the device is not ON when the preset
time is achieved, recording/viewing
cannot begin, nor can notiﬁcations of the
beginning of programs be given.
• TV (Full seg/1Seg) recordings can
only be saved in the internal storage.
Recorded images can only be watched on
the device.
• Be aware that redundant presetting
cannot be done.
Apps
From the "Reservation list" screen,
tap a viewing reservation
• Edit reservation contents and tap "Save".
Deleting reservation contents
"Save"
Note
136
Conﬁrming/editing reservation
contents
From the "Reservation list" screen,
Place a check mark in "Select all" or
the recording/viewing reservation
that you want to delete
"Delete" X "Yes"
Using TV Link
Some data broadcasts may show link
information (TV link) to related sites. By
registering a TV link, it is possible to connect
to related sites later.
• To register a TV link, tap the item that can be
registered for the TV link that is displayed in
the data broadcast area.
• The TV link can only used with 1Seg.
Switching Viewing Area
From the Home screen, "Apps" X
"TV"
X "TV link"
Tap a TV link
• Connect to the registered site.
Note
• From the "TV link" list screen, touch and
hold down a TV link X "Delete" X "Yes" to
delete.
• From the "TV link" list screen, X place
a check mark in "Select all" X "Delete" X
"Yes" to delete all TV links.
From the Home screen, "Apps" X
"TV"
X "Change area"
• When adding new area,
Select an area
• The viewing area changes.
TV (Full seg/1Seg) Settings
From the Home screen, "Apps" X
"TV"
X change settings if necessary
Scan
Scan the channel and
obtain the data again.
G guide
The G guide program
schedule screen is
displayed.
TV box
Watch or manage the
recorded programs.
Apps
137
138
Reservation list
Choose a channel
and time and reserve
a program to record/
watch.
TV link
The registered TV link
list is displayed.
Change area
Add or change the
watching area.
Auto-oﬀ
Set the time to end
TV automatically.
Subtitles
Set on/oﬀ for
subtitles.
• Subtitle display is
only available for
full screen display
or data broadcast
screen.
Multiple sounds
Change sound.
Apps
TV
settings
Brightness
Set screen
brightness.
• Place a check
mark in "Automatic
brightness" so
that screen
brightness changes
automatically as
the environment
changes.
Screen size
Set screen size.
Superimpose
Set whether to use
Telop or not.
The information
such as emergency
bulletins or news
bulletins are displayed
together.
TV
settings
CAS
Information
While watching Full
seg, the required
device information
of this terminal and
the received device
information based
on each channel are
displayed.
• Tap "Reset" to
receive the channel
information again.
Reset
broadcast
memory
Delete data
registered with the
data broadcast and
TV links.
Zip code
Set post code.
• Shown in the area
information such
as whether during
Full seg data
broadcast.
Camera
This terminal has a built-in camera that can
shoot photos and videos.
Before Shooting
All photos and videos shot on your terminal are
saved to the internal storage.
Copyrights and portrait rights
Avoid copyright infringements when copying
or editing photos and videos that have been
shot on this terminal. You should also avoid
infringing the portrait rights of other people by
using or modifying their portraits without their
consent. Note that the shooting or recording of
stage performances, shows or exhibitions may
be prohibited, even for personal use.
You may get ﬁned according to law, regulation
(nuisance prevention ordinance, etc.) if other
people get disturbed or hurt by any improper
behavior when using this terminal.
Please be considerate of the privacy of
individuals around you when shooting and
sending photos using camera-equipped mobile
phones.
Apps
139
Notes for capturing images
• Though the camera is manufactured using
extremely accurate technology, some dots
and lines may always be displayed to be
lighter or darker than you expect. Images
shot under very low light intensity contain
increased noise such as white lines or
random dots, but it is not a malfunction.
• This is normal. Clean the lens with a soft
cloth before shooting. If the lens is stained
with ﬁngerprints or oil, the shot photo may
appear out of focus or blurred.
• Do not leave this terminal in a warm place
or under a direct sunlight for a long period of
time. The quality of shot photos or video may
deteriorate.
• If you shoot under a ﬂuorescent light, mercury
lamp or sodium lamp ﬂickering at high speed,
ﬂickering such as stripes may appear. The
color tone of photos or videos may vary
depending on the shooting timing.
140
Apps
• Do not expose the lens to direct sunlight for
a long period of time and do not point at the
sun or a bright light directly. The image may
become discolored or the camera may fail to
operate properly.
• Do not cover the lens with your ﬁngers or hair
when shooting.
• Shooting a fast moving object may result in
an image slightly distorted from the image
displayed on the screen at the time of
shooting, or the image may be blurred.
• When the battery level is low, you may not be
able to save shot photos or videos. Check the
battery level before using the camera.
• Shot photos or videos may diﬀer from the
actual subjects in brightness or color tone.
• You hear shutter sound even when manner
mode is set to "Vibrate only" or "Do not
disturb".
Viewing Shooting Screen
This camera can take pictures with both
horizontal display and portrait display. The
meaning of marks (icons, etc.) displayed on the
shooting screen are shown below.
a Display/Hide icons
Display/Hide the icons (b, c, d, e, h, i)
on the camera screen.
b Flash on/oﬀ/auto switch
Set ﬂash switch.
• Depending on the shooting mode, ﬂash
may not be able to be set.
c Switch cameras
Switch between the front and main cameras.
d Shooting mode (setting)
Set to Auto/Panorama/Dual.
e Settings
Set up Dynamic tone (HDR)/Resolution/
Voice shutter/Self-timer/Grid display/Invert
left and right part of an image and save/
Saving location/Gesture view. Also you can
check Help of the settings.
• Depending on the shooting mode, there
are items that may not be able to set up.
• There are items that only are displayed in
the front camera, and also the ones that
are not displayed in the front camera.
Apps
141
f Auto focus frame
The frame is white when adjusting focus. It
changes to blue when focus is done.
When the icons (b, c, d, e, h, i) on the
camera screen are not displayed, tap the
screen to put the focus on the tapped place
and then take the still image.
g Thumbnail
• Tap to select an application to use and
conﬁrm the still image you took. Also you
can edit the still image (P144).
• Touch and hold to display the quick
preview screen. Conﬁrm the still images
you took, or drag one to
and release
your ﬁnger to delete it without activating
applications such as "Gallery".
h Recording button
i Shutter
j End button
• Tap it on the screen before taking
still image/video to end the camera
application.
• Tap it while recording a video to stop
recording the video.
k Recording elapsed time
142
Apps
l Cancel auto focus button
Tap the screen while recording the video to
display the button.
Tap the displayed button to cancel the auto
focus.
m Still image button
It is displayed during recording the video. Tap
it to capture the moment as a still image.
n Stop recording button
Stop recording the video.
o Pause button
Stop the recording temporarily.
Shooting a Photo
From the Home screen, "Camera"
Point the camera at the subject
• Pinch out/pinch in the touch screen while
displaying the recording screen to zoom
in/zoom out.
• The shutter clicks and a still image was
taken.
• You can press volume key (up) or volume
key (down) to take pictures.
• View the data you have taken from
"Camera" in "Gallery".
Note
• Touch and hold
on the still image
shooting screen, or press the volume key
(up)/volume key (down) for over one second
to take still images continuously.
• When the shooting mode is "Dual", the main
camera and front camera can take still
images at the same time.
- Drag the small window to move it.
- Touch and hold down the small window
till it turns to aqua color to adjust the
frame size.
- Tap the small window to switch it to the
big window.
Shooting a Video
From the Home screen, "Camera"
Point the camera at the subject
• The recording start sound plays and
Camera starts shooting.
• When the recording starts, the recording
elapsed time will be displayed on the
recording screen.
• Press the volume key (up)/volume key
(down) while recording to take a still
image of that moment.
• You can zoom in/out by pinching out/in
the touch screen during video shooting.
• Tap
while shooting a video to pause.
Tap
to start shooting again.
• The recording stop sound plays and
recording stops.
• You can view the videos you recorded
from "Camera" in "Gallery".
Apps
143
Gallery
Note
• When the video resolution is set to
"1920x1080 (FHD)"/"1280x720 (HD)"/
"Slow Motion (120HD)", a video will be
recorded with the preview screen being
enlarged. The actual recorded screen size
is the same as the screen size during
recording.
144
Apps
You can display photos or play back videos
stored in the terminal that have been obtained
by shooting with the camera or downloading
from the Internet.
Viewing Photos and Videos
From the Home screen, "Apps" X
"Gallery"
Tap an album
Tap one of the thumbnails
• Both photos and videos are displayed by
thumbnail.
• To view photos or videos shot by this
terminal, tap "Camera".
• In album list, tap
to activate camera,
then you can take photos or record
videos.
• Display photos and play back videos.
• You can zoomed in or zoom out a photo
by double-tapping or pinching out or in on
the touch screen.
Note
• The following operations are available on
the photos/video list screen.
: Launch camera to shoot photos or
videos.
: Select a photo or a video to share/
send.
: Select a photo or a video to delete.
• The following operations are available on
the photo display screen.
: Edit the displayed still image.
: Launch camera to shoot photos or
videos.
: Select the displayed photo to share/
send.
: Delete the displayed photo.
: Add to/remove from Favorites.
: Displayed when location information
is added. Tap it to display the map, and
edit or delete the location information.
• The following operations are available from
the photo display screen by tapping .
- "SmartShare": Use SmartShare Beam to
send or receive the still images.
- "Set image as": Set a photo as a picture
in the Phonebook or the wallpaper of the
Home screen.
- "Move": Move a photo to another album.
- "Copy": Copy a photo to another album.
- "Copy to Clip Tray": Copy a photo to Clip
board.
- "Lock"*: Lock a still image.
- "Slideshow": Display the saved photos by
slide show.
- "Rotate left": Rotate a photo to the left.
- "Rotate right": Rotate a photo to the
right.
- "Crop": Trim a photo.
- "Add location"/"Remove location": Add or
remove location information to a photo.
- "Show on map": When location information
is added, conﬁrm the place when this
photo is taken.
- "Rename": Edit a photo name.
- "Print": Print a photo by printer.
- "Details": Conﬁrm detailed information of
a photo.
* On the album list screen, X "Settings"
X "Set lock" X follow the on-screen
instructions to set the contents lock
beforehand.
• For operations when playing back a video,
refer to "Playing Videos" (P146).
Apps
145
GPS/Navigation
By using applications that supports GPS
function on this terminal, you can conﬁrm
the present location or search route to a
destination.
In Using GPS
• XXX is not liable for any damage caused by
failure of GPS system etc.
• It cannot be used as navigation devices for
aircraft, vehicles and people or as a high
precision GPS for measurement. Please note
that XXX shall not bear responsibility for
damages which are pure economic losses
which are generated by opportunities missed
to conﬁrm positioning results and missed
communications due to external factors
(including exhausted batteries) such as
malfunctions, improper operations and power
outages of this terminal if it is used for these
purposes or even if it is not used for these
purposes.
146
Apps
• Since GPS is governed by the United States
Department of Defense, the GPS signals
might be controlled (degradation of accuracy,
signal blackouts, etc.) according to national
security reasons of the US. Also even if
positioning is done in the same locations
and environments, identical results may not
be obtained due to the diﬀerences in signal
conditions caused by the locations of the
satellites.
• Wireless communication products (mobile
phone or data detector etc.) may intercept
satellite signal and signal reception may not
be stable.
• Depending on the legal system of the
country and area, the displayed map based
on the received location information (lat/long
information) may not be accurate.
• Since GPS uses signals from satellites, in the
following environments there are locations
where signals cannot be received or reception
is poor. Thus, the range of error of location
information may be over 300 m.
- In the midst of or underneath dense tree
growth, in areas lined with buildings or
dense residential areas
- Inside or underneath buildings
- Inside of underground tunnels, underground
and underwater
- Near high-voltage lines
- Inside of cars and trains
- In poor weather such as heavy rainfall and
snow
- Inside of bags and boxes
- Hindrances (people and things) around this
terminal
Enabling Location Information
For applications requires access to location
information, set if allow to use location
information gained from GPS function, Wi-Fi®
function and mobile network.
From the Home screen, "Apps" X
"Settings" X "Location"
Turn on "Location"
High accuracy
(GPS and
networks)
Uses GPS, Wi-Fi® and mobile
networks to identify current
location. Although current
location can be detected
more accurately, the terminal
consumes much power of
battery.
Battery saving
(Networks
only)
Uses Wi-Fi® and mobile
networks to identify current
location.
Device
sensors only
(GPS only)
Uses GPS to identify current
location.
"Agree" X "AGREE"
"Mode" X select a location mode
Apps
147
Note
• It may take up to several minutes to
determine current locations when the
GPS functions are used for the ﬁrst time.
• This terminal is equipped with a GPS
receiver that uses satellite signals to
calculate current locations. Some GPS
service functions use the Internet.
Data communication fee may occur
when transferring data via GPS service
functions.
• To use a function which requires a GPS
receiver for positioning of your current
location, check for an unimpeded view of
the sky. Move to another location if your
current location is not determined after a
few minutes.
148
Apps
• In order to calculate the current location
faster, do not move or cover GPS/sub
antenna with other objects.
• Select "Device sensors only (GPS only)"
to gather the anonymous data while
using GPS. To transfer data, note that
the packet communication fee may
occur.
• Select "High accuracy (GPS and
networks)" or "Battery saving (Networks
only)" to allow the anonymous location
data in Google location information
service to be gathered. The data may be
gathered even when the application is
not activated.
Using Maps
You can display present location, search another
place, or search route by using Google map.
• Before getting the current location, set to
"Enabling Location Information" (P147).
• To use Google map, you need to connect
LTE/3G/GPRS network or Wi-Fi®, and set
data communication available to use.
• Google Maps does not work for all nations or
regions.
Opening Maps
From the Home screen, "Apps" X
"Maps"
• Tap "ACCEPT & CONTINUE" when
"Welcome to Google Maps" screen is
displayed.
• When Google account has been logged
in, the "Get the most from Google Maps"
screen is displayed. Conﬁrm the details
and tap "YES, I'M IN"/"SKIP".
• When Google account has not been
logged in, the "Make it your map" screen
is displayed. You can either log in to
Google account or tap "SKIP".
Searching a route
Use the "Directions" function of Google Maps
to search the route by car, by train or on foot.
From the Home screen, "Google" X
"Maps"
X select from
(vehicle)/
(walk)
(mass transit agency)/
Enter starting point in "Choose
starting point" box* X enter
destination in "Choose destination"
box
• Vehicle: Route is displayed.
• Mass transit agency: Selections are
displayed. Tap a selection to display its
route.
• Walk: Route is displayed.
• Tap
to switch starting point and
destination.
* "Your location" may be entered in "Choose
starting point" box.
Input a place in search box
Apps
149
d
Tap one of the routes displayed at
the bottom screen
• Detailed route is displayed.
• Swipe routes at the bottom screen to left
or right to show other routes.
• For vehicle and walk, tap "START
NAVIGATION" to start navigation.
Note
• Any operation during driving should be
performed by a passenger.
• If you have logged in Google account,
you can choose a starting point or
destination from home, work and history.
Searching spots in the area
You can search stores and facilities in the
current location area using Google maps.
150
From the Home screen, "Google" X
"Maps"
Tap search box X After that, follow
the on-screen instructions
Apps
Clock
You can use Alarm, Timer, World clock or
Stopwatch.
From the Home screen, "Apps" X
"Clock"
Tap a tab at top of the screen
• Tapping switches screen of each
function.
Setting Alarm
From the Home screen, "Apps" X
"Clock" X "Alarms" tab
Change the settings if necessary
Hour/Minute
Change the alarm time
setting.
Repeat
Set the alarm to repeat on
certain days of the week
at the same time.
Snooze
duration
Set snooze duration.
Alarm with
vibration
Set if vibrate or not while
alarm is ringing.
Alarm sound
Set alarm sound.
Alarm
volume
Set alarm volume.
ADVANCED SETTINGS
Auto app
starter
Set the application to
launch when the alarm is
stopped.
Puzzle lock
Set if to undo a puzzle to
stop alarm.
Memo
Add memos to alarms that
are set.
Note
• The alarm functions at the time set for
the alarm. Tap "Dismiss" to stop the
alarm.
is displayed on the status bar
when tapping "Snooze". Alarm functions
again based on the time duration set in
"Snooze duration".
• On the "Alarm list" screen, X "Select
all" or place a check mark in the alarm to
delete X "Delete" X "Yes" to delete alarm.
When there is only one alarm that has
been set, X "Yes".
"Save"
• The Alarm list screen is displayed and set
alarm is added to the list.
• Tap
to set alarm ON/OFF.
• Tap list to display "Set alarm" and edit
items. Tap "Save" to overwrite changes
and return to Alarm list screen.
Apps
151
Setting Timer
From the Home screen, "Apps" X
"Clock" X "Timer" tab
Set Hour/Minute/Second
•
X Tap "Settings" to set the following
settings.
Alarm with
vibration
Set if vibrate or not while
alarm is ringing.
Alert sound
Set alarm sound.
Alert volume
Set alarm volume.
From the Home screen, "Apps" X
"Clock" X "World clock" tab
Input a city name in search box X
tap a city
• City name, current time and date of the
selected city are displayed in World clock
list screen.
"Start"
Note
• The timer starts.
• Touch and hold down the added city X
"Set daylight saving" X tap settings to
set summer time.
is displayed besides
the city with summer time set.
• From the World clock screen, X "Select
all" or place a check mark in the city to
delete X "Delete" X "Yes" to delete a city.
When there is only one world clock that
has been set, X "Yes".
Note
• The alarm functions at the time set for
the alarm. Tap "Stop" to stop the alarm.
• Tap "Stop" while timer is running to stop
it. Tap "Resume" to restart. Tap "Reset"
to reset timer.
152
Setting World Clock
You can conﬁrm the date and time for
registered cities in a list.
Apps
Setting Stopwatch
From the Home screen, "Apps" X
"Clock" X "Stopwatch" tab
"Start"
• The stopwatch starts. Tap "Lap" to count
lap times.
• To stop the stopwatch, tap "Stop".
• Tap "Resume" to restart the stopwatch,
and tap "Reset" to reset it.
Calendar
This terminal has a calendar for managing
your schedule. If you have a Google account,
synchronize data with Google calendar.
Opening Calendar
From the Home screen, "Apps" X
"Calendar"
Apps
153
a Switch QSlide application mode
b Icon of today
Move cursor to today's date (date of icon is
changed).
c Icon to create new
Create a schedule.
d Menu
The menu is displayed.
e Switch calendar display
Change the calender display format to Day/
Week/Month/Year/Agenda, display/hide the
Japanese holidays or display the schedules
of each account.
f Switch display
Tap "＜"/"＞" in Day view/Week view/Month
view/Year view to display the previous/next
day, week, month or year.
g Date of today
h Selected date
154
Apps
Switching Calendar Display
From the Home screen, "Apps" X
"Calendar"
X "Day"/"Week"/"Month"/"Year"/"
Agenda"
• Tap "Agenda" to display a list of events.
Tap each list to display the content.
Creating a Schedule
From the Home screen, "Apps" X
"Calendar"
Tap date/time X
X "Save"
X set each item
Note
• When it turns to the time set in "REMINDERS"
screen
on schedule making screen, is
displayed on the status bar. Drag or swipe the
status bar downward to open the notiﬁcation
panel then tap the calendar notiﬁcation, the
Calendar notiﬁcations screen is displayed.
Tap "Dismiss" to clear notiﬁcation. Set snooze
duration and tap "Snooze" to notify again after
it passes the set time.
Changing/Deleting a Schedule
From the Home screen, "Apps" X
"Calendar"
Tap a schedule to change/delete X
(edit)/ (delete)
X "Agenda"
• Tap to edit contents and then "Save".
• Tap and "Yes".
• On the Calendar screen, tap X "Delete"
X "Select all" or place a check mark in
schedules you want to delete X "Delete"
X "Yes" to delete.
QMemo+
Simply take a memo without activating the
memo application. Write characters or draw
illustrations directly on a captured screen.
Open the notiﬁcation panel (P70)
X "QMemo+"
• From the Home screen, "Apps" X
"QMemo+" X "+" to activate it. The tool
bar contents are diﬀerent depending on if
it is activated from the notiﬁcation panel
or from an application screen.
Create a memo
Changing Calendar Settings
From the Home screen, "Apps" X
"Calendar"
Change settings if necessary
X "Settings"
• Set the calendar display, schedule
notiﬁcation, check the built version or set
up an account.
Apps
155
Calculator
a Undo/Redo.
b Edit font, or select a color.
c Select a pen type and a color.
d Use an eraser.
e Display/hide the tool bar.
f Save the memo you created.
g Change the paper style of the created
memo, and use an application or service to
send it.
156
Apps
From the Home screen, "Apps" X
"Calculator"
• From the Calculator screen, X
"Scientiﬁc calculator"/"Basic calculator"
to change functions. If it is landscape
display, both basic calculator and
scientiﬁc calculator are displayed.
• Touch and hold the value or formula
displayed in formula display ﬁeld to cut/
copy/paste it or display it on clipboard.
• Tap
to delete input numbers or
operators one by one.
• Tap X "Calculation history" to display
formula history. When history is displayed,
tap X "Yes" to clear all history.
• Tap
to move to QSlide application
mode.
Settings
Settings Menu
From the Home screen of this terminal, "Apps"
X "Settings" to display the "Settings" screen
to set diﬀerent settings.
WIRELESS
NETWORKS
(P157)
DEVICE
(P171)
PERSONAL
(P182)
SYSTEM
(P190)
WIRELESS NETWORKS
Set to enable/disable networks and set the
network connection settings.
Wi-Fi
(P158)
Bluetooth
(P203)
Mobile data
(P164)
Call settings
(P95)
More...
(P165)
Settings
157
Wi-Fi®
This terminal connects to the Internet via
access points for Wi-Fi® networks or public
wireless LAN services. To connect, you must
conﬁgure the access point connection settings
on this terminal.
■ Reception interference caused by Bluetooth®
devices
• As wireless LAN (IEEE802.11 b/g/n) and
Bluetooth® device use the same frequency
(2.4 GHz), reception interference may
occur or the communications speed may
lower. Also, you may hear noise or have a
connection problem. In these cases, do the
following:
- Keep the wireless LAN device over 10 m
away from the Bluetooth® device.
- When using within 10 m, turn oﬀ the
Bluetooth® device.
158
Settings
Note
• Packet communication can be connected,
even when Wi-Fi® function is ON.
However, while Wi-Fi® is available, Wi-Fi®
is prioritized. When the Wi-Fi® network is
disconnected, this terminal automatically
connects to the LTE/3G/GSM network.
Note that if you keep connecting via the
LTE/3G/GSM network, you may incur
packet communication charges.
• You can reduce battery consumption
by turning OFF Wi-Fi® when you are not
using it.
Connecting to a Wi-Fi® network
Note
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
• Open network and protected network are
two types networks that are available.
The network type is indicated by an icon
to the network name.
represents
an open network and
represents a
protected network. The icon also indicates
the signal strength.
• When "Wi-Fi tutorial" screen is displayed,
tap "Continue" to start a tutorial, or tap
"Close tutorial" to display "Wi-Fi" screen.
Turn on "Wi-Fi"
Tap the Wi-Fi® network that you
want to connect to
Strong signal:
• If you try to connect to a protected Wi-Fi
network, you will be prompted to enter the
security key for that Wi-Fi® network. Tap
the "Password" box, enter the network
password and tap "Connect".
• Usually, when you enter a password,
the last character entered is displayed
and as many "・" as the number of
characters appear instead of previously
entered characters. All characters can be
displayed when you place a check mark in
"Show password".
• To connect to the access point which
supports WPS, on the "Wi-Fi" screen tap
X "Advanced Wi-Fi" X "Connect by WPS
button"/"Connect by WPS PIN" X operate
on the access point side.
®
Weak signal:
• To search Wi-Fi® network again, tap
"Search" on the "Wi-Fi" screen.
• Network name is not displayed depending
on the settings for the access point even if
the network is connectable. If this happens,
you can still connect to the network. Refer
to "Adding a Wi-Fi® network" (P160).
• When establishing a Wi-Fi® network
connection, the required information is
generally obtained from a DHCP server
automatically. However, it is possible to
specify these items separately.
Settings
159
• When "Switch to mobile data" has a
check mark, if the mobile network icon is
displayed on the status bar, it indicates
that the mobile network is being used
and note that the packet communication
fee will occur.
When the popup screen of switching
mobile data is displayed, select "Don't
show this again" and tap "OK" so that the
popup screen is not displayed anymore.
From then on, if the Internet is connected
to an unavailable wireless LAN, it
switches to the mobile network and note
that the packet communication fee will
occur.
• If the access point which is not being
connected to the Internet is being
connected,
is displayed and the mobile
network may be used to communicate
instead of Wi-Fi®.
160
Settings
Adding a Wi-Fi® network
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
Turn on "Wi-Fi"
Tap "Security" box
"Connect"
X "Add Wi-Fi"
Enter network SSID in the "Wi-Fi
name (SSID)" box
• Select the appropriate type from "None",
"WEP", "WPA/WPA2 PSK", and "802.1x
EAP".
• The setting method diﬀers depending on
the security settings.
Disconnecting a Wi-Fi® network
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
Tap the name of Wi-Fi® network that
you want to disconnect
"Disconnect"
Setting mobile data switch
Set whether to check availability of the
connected Wi-Fi® network and change to the
mobile network automatically if it is unavailable.
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
Turn on "Wi-Fi"
Place a check mark in "Switch to
mobile data"
Note
• When the Wi-Fi which is connected to
an access point that is not connected
to the Internet, such as wireless LAN
internal memory card, is disconnected
with a check mark in "Switch to mobile
data", remove the check mark in "Switch
to mobile data".
®
Using static IP address
You can set the terminal to connect to Wi-Fi®
network using the static IP address.
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
Turn on "Wi-Fi"
Tap a Wi-Fi® network to connect
X place a check mark in "Show
advanced options"
Tap "IP settings" ﬁeld X "Static"
"Connect"
Set required items
• To use static IP address, enter the
following items.
- IP address
- Gateway
- Network preﬁx length
- DNS 1
- DNS 2
Settings
161
Conﬁrming/Deleting the saved Wi-Fi®
network
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
Turn on "Wi-Fi"
X "Saved Wi-Fi"
• The Wi-Fi network list that was
connected to is displayed.
®
Tap a Wi-Fi® network name
• The network security information is
displayed.
"Forget"
Note
• On the "Wi-Fi" screen, tap a Wi-Fi® network
name to delete X "Forget" to delete from
the Wi-Fi® network list that was saved.
Using Wi-Fi Direct®
Devices support Wi-Fi Direct® are connected
without using access point.
■ Asking for connecting with another Wi-Fi
Direct® supported device
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
Turn on "Wi-Fi"
Tap the detected Wi-Fi Direct®
supported device
X "Advanced Wi-Fi" X "Wi-Fi Direct"
• Tap "Search" when the Wi-Fi Direct®
supported device you want to connect is
not displayed.
• Send a request to connect another
party's Wi-Fi Direct® supported device.
■ Disconnecting with another Wi-Fi Direct®
supported device
Tap the connected Wi-Fi Direct®
supported device X "OK"
■ Accepting request for connecting with
another Wi-Fi Direct® supported device
162
Settings
From the "Invitation to connect"
screen, "Accept"
Setting advanced Wi-Fi® settings
From the Home screen, "Apps" X
"Settings" X "Wi-Fi"
Turn on "Wi-Fi"
Passpoint
CONNECTION
X "Advanced Wi-Fi"
Change the settings in necessary
NOTIFICATIONS
Wi-Fi
notiﬁcation*1
Allow Wi-Fi
scanning
When Wi-Fi® is OFF, set to
allow the Google position
information service and
other applications scanning
the networks or not.
(P162)
Connect by
WPS button*1
Connect to WPS (WiFi® Protected Setup)
supported access point.
PERSONAL
Install
certiﬁcates
USEFUL SETTINGS
When the screen display of
this terminal is black out,
set to either disconnecting
Wi-Fi® or always maintaining
connection during charging.
Wi-Fi Direct*1
Connect by
WPS PIN*1
You will be automatically
notiﬁed when an open
network with no security
protection is detected.
Keep Wi-Fi on
when screen
is oﬀ
When Wi-Fi® is ON, set to
connect to the available
Passpoint supported
access point or not.
Install the network
certiﬁcate from the
internal storage.
INFORMATION
*1
*2
MAC address
MAC address is
displayed.
IP address*2
IP address is displayed.
When "Wi-Fi" is set to ON beforehand.
When Wi-Fi® network is connected
beforehand.
Settings
163
Mobile Data
Items such as whether or not use mobile data
communication, limit mobile data usage, data
usage cycle and the services being used are
displayed.
Displaying mobile data screen
Mobile data usage (rough number) is
displayed either term by term or application by
application.
From the Home screen, "Apps" X
"Settings" X "Mobile data"
Note
• When "Mobile data" is set to ON, Internet
access via mobile network is enabled.
• On the graph, you can set limit mobile
data usage and a warning for top usage
amount. Only when you place a check
mark in "Limit mobile data usage".
164
Settings
Setting mobile data
From the Home screen, "Apps" X
"Settings" X "Mobile data" X
Restrict
background
data
Restrict auto mobile
data communication.
Show Wi-Fi
usage
Set if display Wi-Fi®
usage or not.
Mobile
hotspots
Set to disable
specialized Wi-Fi®
network on background
applications.
Mobile
networks
(P165)
More...
Miracast
Set to share screen
display and sound on
video equipment that
supports Miracast via
Wi-Fi Direct®. When
available devices
are not found, tap
"Search for devices".
SmartShare Beam
(P213)
Media server
Use DLNA to share
the peripheral device
and media contents.
NFC/Osaifu-Keitai
settings
(P168)
VPN
(P169)
Mobile networks
Set if enable data
communication
and if enable data
roaming. Also set
access point names,
network mode and
network operators.
Set other network settings.
Airplane mode
Turn ON/OFF radio
wave emitting.
Tethering
USB
tethering
(P166)
Wi-Fi
tethering
(P167)
Conﬁgure
Wi-Fi
hotspot
(P167)
Timeout
Set the time
duration until Wi-Fi®
tethering turns oﬀ
automatically.
Bluetooth
tethering
(P168)
Help
Display Help.
Settings
165
Using Tethering
Tethering is a function which uses a mobile
device such as a smart phone as a modem to
connect wireless LAN devices, USB compatible
devices and Bluetooth® compatible devices to
Internet.
Enabling USB tethering
Use microUSB Cable 01 (optional) to connect
this terminal and a PC to access to the
Internet by using this terminal as a modem.
166
Use a microUSB cable to connect
this terminal and a PC (P211)
From the Home screen, "Apps" X
"Settings" X "More..." X "Tethering"
"USB tethering"
Settings
Note
• The operating environment on PC side
during USB tethering is as follows:
- OS*: Windows 8.1/Windows 8/
Windows 7/Windows Vista
* We do not guarantee operations
conducted in environment with
upgraded OS or in added/changed
environment.
• A driver for USB tethering is required. For
details, refer to the following website.
http://www.lg.com/jp/support/softwaremanuals (In Japanese only)
• You can install the driver through the
"Install PC programs" screen displayed
when this terminal is connected to a PC.
• USB tethering can be used together with
Wi-Fi® tethering and Bluetooth® tethering.
Enabling Wi-Fi® tethering
Up to eight wireless LAN compatible devices
can access to the Internet simultaneously by
using this terminal as a Wi-Fi® access point.
From the Home screen, "Apps" X
"Settings" X "More..." X "Tethering"
"Wi-Fi tethering"
Note
• Wi-Fi® tethering can be used together
with USB tethering and Bluetooth®
tethering.
Setting Wi-Fi® tethering
■ Setting Wi-Fi® access point
From the Home screen, "Apps" X
"Settings" X "More..." X "Tethering"
"Conﬁgure Wi-Fi hotspot"
Tap "Security" box
"Save"
Enter network SSID in "Wi-Fi name
(SSID)" box
• Select an appropriate one from "Open",
"WPA PSK" and "WPA2 PSK".
• A password is necessary when setting to
"WPA PSK" or "WPA2 PSK".
Note
• At the time of purchase, network SSID is
set to "KT1601_xxxx", and security is set
to "WPA2 PSK". Set security settings if
necessary.
Settings
167
Setting NFC/Osaifu-Keitai
Enabling Bluetooth® tethering
Up to ﬁve Bluetooth® devices can access
to the Internet simultaneously by using this
terminal as a modem.
From the Home screen, "Apps" X
"Settings" X "More..." X "Tethering"
"Bluetooth tethering"
Set and manage NFC/Osaifu-Keitai settings.
From the Home screen, "Apps"
X "Settings" X "More..." X "NFC/
Osaifu-Keitai settings"
NFC/OsaifuKeitai lock
Restrict Osaifu-Keitai
functions and its usage
services.
Reader/
Writer, P2P
Turn ON/OFF NFC
reader/writer and P2P
functions.
Android Beam
When "Reader/Writer,
P2P" is turned on, set
to beam app contents
to other NFC compatible
terminals or not. For
setting details, refer to
"Android Beam" (P208).
NFC Type
setting
Select an NFC Type to
use.
Note
• Pairing with this terminal is required to
use Bluetooth®.
For details, refer to "Pairing/Connecting
with Other Bluetooth® Device" (P205).
• Bluetooth® tethering can be used
together with USB tethering and Wi-Fi®
tethering.
LOCK PASSWORD SETTINGS
Lock password
change
168
Settings
Change the lock password
for NFC/Osaifu-Keitai.
Connecting to VPN (Virtual
Private Network)
VPN (Virtual Private Network) is a technique
to access to the information protected in local
network from other networks. VPN is generally
equipped in companies, schools or other
facilities. Users can access the local network
and view information outside the premise.
To set VPN access from this terminal, security
information from network administrator is
required.
Adding VPN
From the Home screen, "Apps" X
"Settings" X "More..." X "VPN"
• If an attention screen appears, tap
"Settings" and set screen unlock method
following the on-screen instructions.
"Add VPN network"
Follow instructions given by the
network administrator and set each
item X "Save"
Connecting to VPN
From the Home screen, "Apps" X
"Settings" X "More..." X "VPN"
Tap a VPN name to connect to
Enter the required authentication
information X "Connect"
Editing VPN
From the Home screen, "Apps" X
"Settings" X "More..." X "VPN"
Touch and hold down a VPN name to
edit
"Edit" X Add, delete or edit the
information X "Save"
Deleting VPN
From the Home screen, "Apps" X
"Settings" X "More..." X "VPN"
Touch and hold down a VPN name to
delete
"Delete" X "OK"
Settings
169
Always use VPN
From the Home screen, "Apps" X
"Settings" X "More..." X "VPN"
X "Always-on VPS"
Select a VPN proﬁle X "OK"
Setting Access Point
Access point for connecting the Internet (spmode) is already registered. You can add or
change it if necessary.
For details about sp-mode, refer to website.
When using mopera U or Business mopera
Internet, add access point manually.
For details on mopera U, refer to mopera U
website.
Checking the access point in use
170
From the Home screen, "Apps" X
"Settings" X "More..." X "Mobile
networks" X "Access Point Names"
Settings
Setting an additional access point
〈New APN〉
From the Home screen, "Apps" X
"Settings" X "More..." X "Mobile
networks" X "Access Point Names"
X "New APN"
"Name" X enter the network proﬁle
name you want to create X "OK"
"APN" X enter the access point
name X "OK"
Enter other items required by the
network operator
X "Save"
Note
• Do not change MCC to any value other
than 440, or change MNC to any value
other than 10. It may not be displayed.
• When MCC and MNC settings are not
displayed on the screen after being
changed, reset it to the initial settings or
set the access point manually.
Initializing access point
When initializing an access point, it returns to
the default settings.
From the Home screen, "Apps" X
"Settings" X "More..." X "Mobile
networks" X "Access Point Names"
X "Reset to default" X "Yes"
DEVICE
Sound
Set sound settings such as phone ringtone,
volumes and vibrate.
BASIC
Manner Mode
Select from "Sound &
Vibrate", "Vibrate only" or "Do
not disturb".
Volume
Set the volumes for
"Ringtone", "Notiﬁcation
sound", "Touch feedback &
system", and "Music, video,
games & other media".
RINGTONES & VIBRATIONS
Ringtone
Set a phone ringtone.
Notiﬁcation
sound
Set up a notiﬁcation sound.
Vibrate
Set to notify an incoming call
by vibration.
Vibration
type
Select a vibrate type.
Settings
171
NOTIFICATIONS
Do not
disturb
Set whether to ring when
there is an important
notiﬁcation such as an
incoming call, a new
message.
• The alarm always rings.
Lock screen
Set whether to display
contents (contents of
a received mail, etc.) or
notiﬁcations when the screen
is locked.
Apps
Allow/block the notiﬁcations
from each application.
ADVANCED SETTINGS
172
Vibrate on
tap
Set whether to vibrate when
tapping any home touch
button or dialpad (P54).
Sound
eﬀects
Set whether to enable
"Dialpad touch sounds",
"Touch sound" or "Screen
unlock sound".
Settings
Voice
notiﬁcations
Set whether to read out the
sender's information and
the message contents of
a received message (SMS)
automatically.
• In "Voice notiﬁcations
language", set preferred
engine, speech rate and
listen to an example.
Display
FONT
Set display settings such as screen brightness
or animations.
SCREEN
Brightness
Set screen brightness.
• If you place a check mark in
"Automatic brightness", the
screen brightness changes
automatically according to
the environment.
Screen
timeout
Set time duration before
screen turns oﬀ automatically.
Screenoﬀ eﬀect
Set eﬀect when turning oﬀ
screen.
Auto-rotate
screen
Set to switch the screen to
horizontal/portrait according
to the orientation of this
terminal.
Daydream
Set Daydream.
• Tap "Start now" to activate
Daydream.
• Set the timing to activate
the Daydream when tapping
"Startup settings".
Font type
Set the font displayed on the
screen.
Font size
Select from "Minimum",
"Small", "Medium", "Large",
"Very large", "Maximum".
ADVANCED SETTINGS
Smart screen
Set if screen stays on when
you are watching the screen.
Home touch
buttons
Select a layout and a color
for home touch buttons, or
set whether to display the
home touch buttons while
using an application.
Notiﬁcation
LED
Set whether to turn on the
Notiﬁcation LED light while
receiving calls or during
notiﬁcation.
• When receiving an Area
Mail, always notify by
Notiﬁcation LED light.
Settings
173
Home Screen
Set the Home screen settings.
Select Home
Switch home applications.
SCREEN
Wallpaper
Set a wallpaper.
Screen swipe
eﬀect
Select a screen eﬀect.
Allow Home
screen
looping
Set to go to the initial screen
or not when scrolling the
Home screen.
DATA
Home
backup &
restore
Back up or restore the
layout and wallpaper of the
applications.
TIPS
Help
174
Settings
Read Home screen related
Help.
Disney Character Settings
Select a Disney character to change the
window image, live wallpaper, ring tone, etc.
of the mickey window cover collectively or
individually.
• To use it, you need to download/update
"Disney マーケット (Disney Market)"
application, and set up an Google account
(P119, P187).
Collective settings
From the Home screen, "Apps" X
"Settings" X "Disney character
settings"
Tap a Disney character X " 一括設定
(Collective settings)" X "OK"
• The settings of live wallpaper or ring tone
are changed collectively.
Individual settings
From the Home screen, "Apps" X
"Settings" X "Disney character
settings"
Tap a Disney character X swipe
the screen to left/right to display
the items to be changed X " 個別設定
(Individual settings)" X "OK"
• The settings of the selected items are
changed.
Lock Screen
Set to lock screen or not. Set settings if
necessary.
• The display and setting items vary depending
on your selection from "None", "Touch",
"Swipe", "Knock Code", "Pattern", "PIN",
"Password" to unlock the screen.
SCREEN SECURITY
Select
screen
lock
None
Disable the security of
unlocking screen.
Touch
Tap to unlock screen.
Swipe
Swipe to unlock screen.
Knock
Code
Tap the pattern that you
set when the screen is OFF
to unlock it.
Pattern
Draw pattern to unlock
screen. You can set your
favorite pattern.
PIN
Enter a PIN to unlock
screen. Follow the onscreen instructions to
enter a 4 to 16-digit
number.
Settings
175
Select
screen
lock
Password
Smart Lock
176
Enter a password to
unlock screen. Follow the
on-screen instructions
to enter a 4 to 16-digit
password including
alphabets.
Set to unlock the touch
screen automatically by a
trusted terminal, location or
face that you have set up.
Randomize PIN
entry
Set whether the number
layout on keyboard is
random when inputting PIN.
Hidden
password
Set whether to display the
password input area when
tapping the screen.
CUSTOMIZE
Wallpaper
Set wallpaper when locking
screen.
Screen swipe
eﬀect
Set the screen eﬀect when
swiping the screen to
unlock.
Shortcuts
Customize the shortcut
displayed on the lock
screen.
Pattern eﬀect
Set pattern input screen
eﬀect.
Weather
animation
Hidden pattern
When tapping lock screen,
set if show pattern dots or
not.
Set if update weather
information for current
location or primary city and
display it by animation.
Make pattern
visible
Set to show pattern line or
not.
Contact info for
lost phone
Hidden PIN
Set whether to display
the PIN input area when
tapping the screen.
Set whether to display
contact information on
the lock screen when this
terminal is missing.
Settings
LOCK TIME
Lock timer
Set time duration from the
screen turns oﬀ till it is
locked.
Power button
instantly locks
Set to lock the screen
immediately or not after
pressing the power key.
Note
〈On-Screen Unlock〉
• If you entered an incorrect screen-unlock
patterns for ﬁve times, a message is
displayed to remind you to re-input the
pattern after 30 seconds. If you forgot
the screen-unlock pattern, tap "Forgot
pattern?" on the reentry screen and
enter your backup PIN or log in with your
Google account set up on your terminal
to unlock screen.
• If you entered an incorrect PIN for ﬁve
times, a message is displayed to remind
you to re-input the PIN after 30 seconds.
If you forget the PIN, tap "Forgot PIN?"
on the reentry screen and log in with your
Google account set up on your terminal
to unlock screen.
• If you entered an incorrect password for
ﬁve times, a message is displayed to
remind you to re-input the password after
30 seconds. If you forget the password,
tap "Forgot password?" on the reentry
screen and log in with your Google
account set up on your terminal to unlock
screen.
• Note that you cannot unlock the screen if
you forgot the PIN or the password when
Google account has not set up yet.

• When the screen lock is set to "Knock
Code"/"Pattern"/"PIN"/"Password", a
screen appears so that you can select
the notiﬁcation displayed on the lock
screen.
When "Hide sensitive only"/"Hide all
notiﬁcations" is selected, note that the
notiﬁcation icons, caller's name, phone
number, the number of missed calls/
voicemails may not be displayed on the
lock screen anymore.
Settings
177
Gestures
Enable or disable each gesture.
ANSWER ME
Silence
incoming
calls
When this terminal is ringing
or vibrating, ﬂip the terminal
over to make the display face
downwards to stop ringtone or
vibration.
OTHERS
178
Snooze or
stop alarm
Flip the terminal over to make
the display face downwards to
stop alarm.
• Snooze function works if you
have set "Snooze duration"
to "Oﬀ" in Alarm/Clock
application.
Cinderella
Moment*
Shake this terminal twice
with the Home screen being
displayed to play the special
animation.
Help
Display how to use the
Gestures functions.
Settings
SENSOR
Motion
sensor
calibration
Calibrate the accuracy of
sensor (the tilt and speed of
the sensor).
• Operate it when Gesture does
not work properly.
* Operate only when the Home selection is
"Home".
Storage
Battery
Display free space in internal storage and
microSD card, operate mount and format.
INTERNAL STORAGE
Total space
Total space of the internal
storage is displayed.
Available
Available space of the internal
storage is displayed.
Apps,
Audio etc.
Used space of the internal
storage is displayed.
SD CARD
Total space
Total space of the microSD
card is displayed.
Available
Available space of the microSD
card is displayed.
Unmount
SD card/
Mount SD
card
• Unmount the microSD card
to remove it safely.
• Mount the microSD card to
enable to use it.
Erase SD
card
Clean up all the data (music,
photos, etc.) inside the
microSD card.
Conﬁrm the remaining battery, set to restrict
the usage of each function when the battery is
getting less.
BATTERY INFORMATION
Remaining
battery icon
Battery levels are
displayed in percentages.
It displays whether the
battery is being charged,
the expected time to
charge fully/the usable
total time.
Battery usage
Conﬁrm the details of
battery consumption.
Battery
percentage on
status bar
Set whether to display
the remaining battery
on the status bar in
percentage.
BATTERY SAVER
Battery saver
(P180)
Help
Description related
to battery saver is
displayed.
Settings
179
Apps
Turn on battery saver
When the remaining battery is less than the
set value, etc. set the battery saver to restrict
the battery consumption by reducing the
screen brightness, etc.
• Conﬁrm the description related to battery
saver in Help.
180
From the Home screen, "Apps" X
"Settings" X "Battery" X "Battery
saver"
Turn on "Battery saver"
"Immediately"/"5% battery"/"15%
battery"
Settings
Manage or delete the installed applications.
Conﬁrming downloaded application/
all applications
From the Home screen, "Apps"
X "Settings" X "Apps" X tap an
application in "DOWNLOADED"
tab/"ALL" tab/"DISABLED"tab
Force stop
Force-quit an application
being activated.
Disable/
Enable/
Uninstall
Disable/enable
application or uninstall
application.
Show
notiﬁcations
Set if show notiﬁcation
of update or important
warning.
Clear data
Delete application data.
Clear cache
Clear application cache.
Clear defaults
Start Initializing when
it is set to start
activating in default.
Deleting an application
• Some preinstalled applications may not be
able to be deleted (uninstalled). Part of the
applications can be disabled (P181).
• It is recommended that the applications
purchased from Play Store be delete (P122)
from Google Play screen.
From the Home screen, "Apps" X
"Settings" X "Apps" X "ALL" tab
Tap an application to delete
"Uninstall" X "OK"
Disabling an application
Disabled application stops its operation and it
is not displayed on the Apps screen.
• It will not be uninstalled.
• It is available for some applications or
services that cannot be uninstalled.
From the Home screen, "Apps" X
"Settings" X "Apps" X "ALL" tab
Tap an application to disable
"Disable" X "Yes"
Note
• When an application is disabled, the
linked applications may not run properly.
In such case, enable it again to run
properly.
Settings
181
Enable an application again
From the Home screen, "Apps" X
"Settings" X "Apps" X "DISABLED"
tab
Tap the application you want to
enable again
"Enable"
Default Message App
Location
Set GPS settings, etc.
Mode
When there are applications that request the
latest location information, the list is displayed.
LOCATION SERVICES
Camera
Set whether to record the
location information in the
photos or videos taken by the
camera.
Google
Location
Reporting
Set whether to use Google
location information service
so that the application can
get the user location quicker.
Gather the anonymous
location information and send
it to Google.
• To use it, setting Google
account is required (P187).
GPS
notiﬁcation
Set if play back audio and
vibrate while GPS is searching
for location information.
Select a message application which is used
normally from "messaging" and "Hangouts".
182
From the Home screen, "Apps" X
"Settings" X "Default message app"
"Messaging"/"Hangouts"
Settings
(P147)
RECENT LOCATION REQUEST
Security
PASSWORDS
Set password settings.
Content
lock
Select a lock type when locking
a ﬁle in gallery.
ENCRYPTION
Encrypt
phone
Encrypt the system data saved
in the internal storage. After
that, PIN or password is required
every time when the power is
turned on to decode.
• To cancel the encryption,
from the Home screen "Apps"
X "Settings" X "Security" X
"Encrypt phone" and follow
the on-screen instructions.
• Reset this terminal to the
state after the purchase
to cancel the encryption
(P189).
SIM CARD LOCK
Set up SIM
card lock
(P186)
Password
typing
visible
Set if show the last character
of a hidden password or not as
you type.
PHONE ADMINISTRATION
Phone
administrators
Select a device administrator
to activate in this terminal.
Unknown
sources
Set if allow installation of
applications from sources other
than Google Play.
Verify apps
Disallow or warn before
installation of applications that
may cause harm.
CREDENTIAL STORAGE
Storage
type
Show the location for credential
storage backup.
Trusted
credentials
Trusted CA credential is
displayed.
Install from
storage
Install certiﬁcates from
storage.
Settings
183
Clear
credentials
Delete credential information
of all contents and VPN in
credential storage.
• To delete an installed
certiﬁcate, you need to
delete credential storage.
ADVANCED SETTINGS
184
Trust
agents
Set whether to execute the
selected operation when a
trusted terminal is connected.
Screen pin
Set whether to ﬁx a certain
application on the screen of
this terminal or not.
App usage
access
Set whether to access to a
certain application or not.
Settings
Security code on this terminal
Some functions provided for convenient use of
the terminal require the security code to use
them. Besides a password for screen lock of the
terminal, a network security code necessary
for the network services etc. are available.
Make use of the terminal using an appropriate
security code according to the purpose.
• Entered PIN/password for screen lock,
network security code, PIN code and PUK
code are shown as "•".
■ Cautions on using security codes
• Avoid using a number that is easy to
guess, such as "birth date", "part of your
phone number", "street address number or
room number", "1111", and "1234". Make
sure to make a note of the security code
you set lest you should forget it.
• Do not reveal your security codes to
others. XXX is not responsible for damage
caused by misuse of your security codes
by others.
• If you forget security codes, you should bring
your oﬃcial identiﬁcation (such as driver's
license), the terminal, and nano UIM card
with you to the nearest Shop. For details,
contact the "Information Center" on the last
page of this manual.
• The PUK code is written on the
subscription form (copy for customer)
handed at the subscription in the Shop. If
you have subscribed at other than Shop,
you should bring your oﬃcial identiﬁcation
(such as driver's license), the nano UIM
card with you to the nearest Shop or
contact "Information Center" on the last
page of this manual.
■ PIN/password for screen lock
The security code is used for lock function of
the terminal.
■ Network security code
The network security code is a 4-digit
number necessary for using the Network
Services or identiﬁcation at reception of your
request in Shop or at Information Center,
or when using " お客様サポート (customer
support)". It can be set to any number at
the subscription and also changed later by
yourself.
For details on Network security code, refer to
website.
■ PIN code
The nano UIM card can set security code
named PIN code. This code is set to "0000"
at the time of subscription, but you can
subsequently change it.
PIN is a 4- to 8-digit number (code) that
must be entered for user conﬁrmation to
prevent unauthorized use of nano UIM card
by a third party every time you insert the
nano UIM card into the terminal or when the
terminal is powered on. You can set entering
the PIN code enables making/receiving calls
and terminal operations.
• If you use a nano UIM card that has
been currently used when you buy a new
terminal, use the same PIN code that had
been set on the current terminal. The code
is "0000" if the default setting has not
been changed.
• If you enter incorrect PIN code three times
in a row, the code will be locked. In that
case, unlock with "PIN unblocking key".
Settings
185
■ PIN unblocking key (PUK)
The PIN unblocking key is an 8-digit number
used to unblock the PIN code. You cannot
change it by yourself.
• If you enter the PIN unblocking key
incorrectly ten times in a row, the nano UIM
card will be locked. If this happens, please
contact a Shop.
Setting PIN code
You can set to require the PIN code entry for
using the terminal when the power is turned
on.
186
From the Home screen, "Apps" X
"Settings" X "Security"
"Set up SIM card lock"
"Lock SIM card"
Enter PIN and tap "OK"
• Place a check mark in "Lock SIM card".
Settings
Changing PIN
Enable PIN beforehand.
From the Home screen, "Apps" X
"Settings" X "Security"
"Set up SIM card lock"
"Change SIM PIN"
Enter the current PIN, and tap "OK"
Enter a new PIN and tap "OK"
Enter the same PIN that you entered
in step 5 and tap "OK"
Accounts & sync
Entering PIN
Follow the operations below if you are asked to
enter the PIN when turning on this terminal.
Enter the PIN of the nano UIM card,
and tap "OK"
Unlocking PIN
Follow the operations below to unlock PIN
when you have entered PIN incorrectly for 3
times in a row.
From the PUK input screen, enter
PUK code and tap "OK"
Enter a new PIN and tap "OK"
Enter the same PIN as you entered
in step 2 and tap "OK"
Add or delete an account used in this terminal,
such as Google account. Set synchronization
settings.
Setting account
From the Home screen, "Apps" X
"Settings" X "Accounts & sync"
"Add account"
Tap an account type you want to add
Set according to the on-screen
instructions
Note
• The application automatically synchronizes
data if "Auto-sync data" is turned on.
Packet communication fee may be charged
when operating the above operations. Also
it consumes more battery than when "Autosync data" is turned oﬀ.
• When synchronizing manually, from the
Home screen "Apps" X "Settings" X
"Accounts & sync" X select an account
type X tap an account to synchronize X tap
the items to synchronize, or X "Sync now".
Settings
187
Removing account
From the Home screen, "Apps" X
"Settings" X "Accounts & sync"
Tap an account type to delete
Tap the account name to delete
X "Remove account" X "OK"
Language & input
Set language and keyboard settings in this
terminal. You can also set voice input and
output settings.
Language
Select a language you use in
this terminal.
KEYBOARD & INPUT METHODS
Default
Select default keyboard and
input method.
Google voice
typing
Tap to place a check mark
to use. Also tap
to set the
settings.
LG Japanese
keyboard
Tap
to set settings
(P62).
Moji-Henshu
Tap
to conﬁrm the application
information and open source
license information.
SPEECH
188
Settings
Voice Search
Set up a language to use in
voice recognition.
Text-tospeech
output
Set speech settings. You can
set preferred engine, speech
rate and listen to an example.
Initializing this terminal
MOUSE/TRACKPAD
Pointer
speed
Set pointer speed when this
terminal is connected a with
mouse or a trackpad.
Backup & reset
Initialize settings.
BACKUP & RESTORE
Backup my
data
Set to backup on the Google
server or not.
Backup
account
Set an account for backup.
Add an account to use as a
backup in "Add account".
Automatic
restore
Restore the backed up
settings and data when
installing an application again.
From the Home screen, "Apps"
"Settings" X "Backup & reset"
"Factory data reset" X "Reset
phone" X "Delete all" X "OK"
• When deleting the data saved in microSD
card, place a check mark in "Erase SD
card".
Note
• The battery level should be more than
30% for initializing this terminal.
• Backup your data such as images,
videos and music on PC. For details
about connection method, refer to "File
Management" (P197) and "External
Device Connection" (P210).
PERSONAL DATA
Factory data
reset
Delete all the data inside this
terminal.
Settings
189
SYSTEM
Set shortcut keys, date and time, accessibility,
mickey window cover, print and terminal
information.
Shortcut Key
Set whether to quickly access to QMemo+ or
camera when the screen is turned oﬀ or when
pressing and holding the volume key on the
lock screen.
Date & time
Set settings about date and time.
190
Auto-date &
time
Set the automatic retrieval of
date and time information via
the network.
Auto-time
zone
Set the automatic retrieval of
time zone information via the
network.
Set date
Set date manually.
• Set up the settings after
turn oﬀ "Auto-date & time".
Settings
Set time
Set time manually.
• Set up the settings after
turn oﬀ "Auto-date & time".
Select time
zone
Set time zone manually.
• Set up the settings after
turn oﬀ "Auto-time zone".
Use 24-hour
format
Set to display the time in 24hour or 12-hour format.
Select date
format
Set the date format.
Accessibility
Set application settings related to
accessibility.
Voice
notiﬁcations
Set whether to read out the
sender's information and
the message contents of
a received message (SMS)
automatically.
• Set preferred engine, adjust
speech rate and listen to
an example demonstration
in "Voice notiﬁcations
language".
Screen shade
Set the brightness to the
minimum to save battery.
Accessibility
shortcut
Set whether to enable the
start of accessibility function
from each of the screens.
Text-tospeech
output
Set speech settings. You can
set preferred engine, speech
rate and listen to an example.
VISION
TalkBack
Enable user assistance
services such as responding
to user operations via audio
and vibrations, reading out
text . Also set settings of
speech, other feedback,
touch exploration, etc.
Font size
Select from "Minimum",
"Small", "Medium", "Large",
"Very large", "Maximum".
Invert colors
The colors of screen and
contents are inverted.
Color
adjustment
Adjust the display color of
screen and contents.
Touch zoom
Zoom in or zoom out by tripletapping the screen.
HEARING
Audio type
Select an audio type from
"Mono"/"Stereo".
Sound
balance
Adjust the volume balance by
sliding to left or right.
Settings
191
Notiﬁcation
LED
Set to turning on the LED
light during an incoming call
or a notiﬁcation.
Flash
alerts
Set the camera ﬂash to blink
during an incoming call or a
notiﬁcation.
Turn oﬀ all
sounds
Set whether to turn oﬀ all the
sounds.
Captions
Customize the subtitle
settings for hard-of-hearing
people.
PHYSICAL AND MOTOR
192
Touch
feedback
time
Select a touch response
sensitivity from "Short",
"Medium" and "Long".
Touch
assistant
Display the touch board
to access to the physical
button functions or a gesture
quickly.
Screen
timeout
Set time duration
before screen turns oﬀ
automatically.
Settings
RECOGNITION
Touch
control
areas
Set the screen area where
the touch operation is not
allowed.
SYSTEM
Auto-rotate
screen
Automatically switch the
screen to portrait display/
landscape display when this
terminal is rotated.
Password
voice
conﬁrmation
Use TalkBack to read the
input password out loud.
Power key
ends call
Press the power button to
end a call.
• With a check mark, when
the backlight is black out
during talking on the phone
and the screen is locked,
press the power key twice
to end the call.
Accessibility
settings
shortcut
Triple-tap the home key to
toggle "TalkBack", "Invert colors"
and "Touch assistant". You
can also jump to "Accessibility
settings". When you choose
"Show all", you can select
functions to set at any time.
SERVICES
Switch
Access
The operations when
the back key, or home
key, etc. is pressed set
whether controlling is to be
substituted by physical key
combinations such as the
power key, etc.
Note
• You can download and set applications
compatible with user assistance services
from Google Play.
• If you authorize the usage of TalkBack, be
careful since personal information such
as credit card numbers, etc. might also be
recorded in exchanges via user interfaces.
If perchance, data and information which
were registered happen to be leaked,
please be forewarned that XXX shall not
bear any responsibility.
• If TalkBack is allowed to use, the Touch
guide function also becomes valid. The
Touch guide is a function which can read
aloud and display explanations of the items
where your ﬁnger is positioned. After you
once turn on the Touch guide functions, tap
items once to select them, after they are
selected, then double tapping and scrolling
become a two ﬁnger operation.
To turn oﬀ the Touch guide individually, from
the Home screen, "Apps" X "Settings" X
"Accessibility" X "TalkBack" X "Settings" X
remove check mark from "Explore by touch".
Settings
193
Mickey Window Cover
Set up the Mickey Window Cover L01 which is
in the package.
194
Select apps
Select applications used on the
Mickey Window Cover L01.
Preview
emails &
messages
When a mail (Email) or a
message is received, set
whether to display the
notiﬁcation on the mickey
window cover screen.
• When the screen lock is set
to "Knock Code"/"Pattern"/
"PIN"/"Password", the check
mark will be canceled
automatically. Even when the
screen lock is set to "Knock
Code"/"Pattern"/"PIN"/
"Password", you need to
place a check mark manually
to display the mail (Email)
and message notiﬁcation on
window screen.
Settings
Autounlock
When the screen lock is set to
"Touch" or "Swipe", the screen
lock is canceled automatically
when the ﬂip section is opened.
Help
Help is displayed.
Printing
Set or manage the printer which uses Google
cloud print.
From the Home screen, "Apps" X
"Settings" X "Printing" X "Cloud
Print"
Turn on "Cloud Print"
• Available printers are listed.
• Tap to add a printer or change the
settings.
Note
• To use cloud print, setting Google
account is required (P187).
About Phone
Hardware info
Model number (model
name), up time, WiFi® MAC address and
Bluetooth® address are
displayed.
Software info
Android version,
baseband version, kernel
version, build number and
software version being
used in this terminal are
displayed.
Legal info
Legal documents for LG
software, open source
license, Google legal are
displayed.
Information related to this terminal is displayed.
Phone name
Set phone name for
Bluetooth®, Wi-Fi Direct®,
etc.
Update
Center
App
Updates
(P245)
Software
Update
(P240)
Network
Network, mobile network
type, service state,
roaming, mobile network
state and IP address are
displayed.
Status
Your phone number and
IMEI are displayed.
Battery
The battery status,
remaining power and
the usage state are
displayed.
Checking your own phone number
From the Home screen, "Apps"
X "Settings" X "About phone" X
"Status"
• Your phone number is displayed in "My
phone number".
Settings
195
196
Settings
File Management
Storage Structure
This Terminal (Internal
Storage)
Main created folders in the phone (internal
storage) at the time of purchase are as
follows.
• Depending on operations on the terminal,
displayed folders may diﬀer.
Alarms
Save music data etc. for
alarm sound.
Android
Save setting data or
temporary ﬁles for the
system or applications.
DCIM
Save still image/video data
shot by the camera (when
the saving location is set to
the terminal).
Download
Save data downloaded by the
browser.
Movies
Save video data.
Music
Save music data.
Notiﬁcations
Saves music data etc. to be
set as notiﬁcation sound.
Pictures
The still image data is saved.
Podcasts
Podcast data is saved.
Preload
The data saved beforehand
after purchasing is saved.
Ringtones
Save music data etc. for
ringtone or alarm sound.
File Management
197
microSD card (External
Storage)
You can attach microSD card (including
microSDHC card and microSDXC card) to the
terminal and use it.
• This terminal supports a microSD card of up
to 2 GB, a microSDHC card of up to 32 GB,
and a microSDXC card of up to 128 GB (as
of May 2015).
• A microSDXC card can only be used with
SDXC compatible devices. Do not insert a
microSDXC card into a device incompatible
with SDXC since it may cause damage to the
data stored in the microSDXC card.
• To use microSDXC card again with damaged
data inside, you need to initialize the
microSDXC card with an SDXC compatible
device (all data will be deleted).
• To data copy with an SDXC incompatible
device, please use a card that meets the
standard of a copy destination/copy source
device such as microSDHC card or microSD
card.
• Consult each microSD card manufacturer for
information about the compatible microSD
card.
198
File Management
• The UHS speed class of microSD card
supported by this terminal is class 1.
• The speed class of microSD card supported
by this terminal is up to class 10.
Inserting microSD card
Detach the back cover (P36)
Remove the battery pack (P47)
With the metal contacts facing
down, insert the microSD card
into the microSD card slot in the
direction of arrow mark until it is
ﬁxed
Removing microSD card
When removing the microSD card, make sure
to unlock the SD card mount (safely remove)
before removing it (P179).
Detach the back cover (P36)
Remove the battery pack (P47)
Pull microSD card straight out in
direction of arrow mark
Formatting microSD card
Note that formatting microSD card erases all
data in the microSD card.
From the Home screen, "Apps" X
"Settings" X "Storage"
"Erase SD card" X "Erase SD card"
X "Erase everything"
• When the unlock screen appears, perform
unlocking method and then tap "Erase
everything".
File Management
199
Cloud storage
File Operations
File or Folder Operations
Use "File Manager" to display or manage the
data, such as the still images, videos, music or
documents, which were saved in this terminal
or in cloud storage.
From the Home screen, "Apps" X
"File Manager"
"Dropbox"
Creating a folder
Storage in this terminal
From the Home screen, "Apps" X
"File Manager"
From the Home screen, "Apps" X
"File Manager"
"All ﬁles"/"Music"/"Image"/"Video"/
"Document"
"All ﬁles" X "Internal storage"/"SD
card" X tap the folder if necessary
Tap a folder or ﬁle
X enter a folder name X "Save"
When the application selection
screen is displayed, select an
application to use X "OK"
• The ﬁle is displayed/played.
200
• To use Dropbox, you need to have a
Dropbox account. Follow the on-screen
instructions.
File Management
Note
• A folder can only be created in "Internal
storage" or "SD card" of "All ﬁles", or
inside "Dropbox".
Renaming a ﬁle or folder
Deleting a ﬁle or folder
From the Home screen, "Apps" X
"File Manager"
From the Home screen, "Apps" X
"File Manager"
"All ﬁles"/"Music"/"Image"/"Video"/
"Document" X tap a folder if
necessary
"All ﬁles"/"Music"/"Image"/"Video"/
"Document" X tap a folder if
necessary
Touch and hold a folder/ﬁle X
"Rename" X Enter a name X "Save"
Touch and hold a folder/ﬁle X
"Delete" X "Yes"
Note
Note
• When purchasing, some folders such as
"Android" or "DCIM" which were created in
this main unit (internal storage) cannot
be moved or copied.
• When purchasing, some folders such as
"Android" or "DCIM" which were created in
this main unit (internal storage) cannot
be moved or copied.
File Management
201
Searching Data
Moving/Copying a ﬁle or folder
From the Home screen, "Apps" X
"File Manager"
"All ﬁles" X tap the folder if
necessary
From the Home screen, "Apps" X
"File Manager"
Touch and hold a folder/ﬁle X
"Move"/"Copy"
"All ﬁles"/"Music"/"Image"/"Video"/
"Document"
Display the moving destination/copy
destination folder X "OK"
X enter keyword(s) you want to
search
Note
• When purchasing, some folders such as
"Android" or "DCIM" which were created in
this main unit (internal storage) cannot
be moved or copied.
202
File Management
Data Communication
Bluetooth® Communication
Connect this terminal to Bluetooth® devices
wirelessly, to exchange data.
• For Bluetooth® compatible version or proﬁle,
refer to "Main Speciﬁcations" (P246).
• For Bluetooth® setting and operation
procedure, refer to the manual of the
Bluetooth® devices being connected.
• We do not guarantee that this terminal can
be connected to all Bluetooth® devices
wirelessly.
■ Notes on using Bluetooth® function
• The distance between this terminal and
another Bluetooth® device should be
kept within approximately 10 m with no
obstructions in sight. The detectable
distance may be shorter than 10 m
when there are obstructions between
this terminal and a Bluetooth® device,
or depending on the conditions of the
surroundings (such as walls or furniture)
and the structure of a building. Especially
when there is a wall or ﬂoor of reinforced
concrete between them, they may be
unable to connect with each other. Note
the above mentioned distance is not
guaranteed.
• Make sure to keep this terminal 2 m or
more away from another device such as
home electric appliances, AV devices,
OA devices, etc. Microwave oven can
easily aﬀect Bluetooth® function, so keep
this terminal 3 m or more away from
the microwave oven. Otherwise, normal
connection cannot be performed when
nearby electric devices are powered on.
TVs and radios may receive noise or video
interference.
• Move the Bluetooth® device to a place
where connection is available when there
is a broadcast station or radio near the
Bluetooth® device or else this terminal
cannot be connected to the device. Strong
radio waves may prevent from connection
between this terminal and the Bluetooth®
device.
Data Communication
203
• Wireless connection is available when
Bluetooth® device is put in a bag or pocket.
However, lowering of communication
speed or noise may result when you are in
between the Bluetooth® device and this
terminal.
• The radio wave from Bluetooth® may aﬀect
the operation of medical electronics etc.
Bluetooth® communication in some cases
may result in an accident, so turn oﬀ this
terminal and other Bluetooth® devices in
the following places.
- On trains
- On airplanes
- In hospitals
- Near automatic doors or ﬁre alarms
- In places such as gas stations where
ﬂammable gas is generated
204
Data Communication
■ Reception interference caused by wireless
LAN devices
• As this terminal's Bluetooth® device
and wireless LAN devices use the same
frequency (2.4 GHz), reception interference
may occur or the communications speed
may lower if you use the Bluetooth® device
near the wireless LAN devices. Also, you
may hear noise or have a connection
problem. In these cases, do the following:
- Keep the Bluetooth® device over 10 m
away from a wireless LAN device.
- Within 10 m, turn oﬀ either the
Bluetooth® device or the wireless LAN
device.
■ Pass code (PIN) of Bluetooth® function
• Pass code (PIN) is an authentication
code to enter when accessing Bluetooth®
devices for the ﬁrst time to recognize and
permit the connection each other. Entering
the same pass code (PIN) (up to 16 single
byte alphanumeric characters) on each
sending/receiving device is required.
• On this terminal, pass code may
sometimes be displayed as "PIN".
Turning ON Bluetooth®
Function to Make this
Terminal Discoverable
From the Home screen, "Apps" X
"Settings" X "Bluetooth"
Turn on "Bluetooth"
Note
• When you do not use Bluetooth® function,
turn it oﬀ to save the battery.
• The setting of the Bluetooth® ON/OFF is not
changed even when the power is turned oﬀ.
Pairing/Connecting with
Other Bluetooth® Device
To transfer data by Bluetooth® communication,
perform pairing (pairing setting) with another
device in advance, and then register it to this
terminal.
• Depending on Bluetooth® devices, there are
devices with only pairing and those conduct
till connection.
From the Home screen, "Apps" X
"Settings" X "Bluetooth"
Turn on "Bluetooth"
Changing the name of this terminal
You can change the name of this terminal
displayed on another device when
communicating via Bluetooth® communication.
From the Home screen, "Apps" X
"Settings" X "Bluetooth"
Turn on "Bluetooth"
• Detected Bluetooth® devices are
displayed by list.
• If no Bluetooth® devices are displayed,
tap "Search" to re-search.
Tap a desired device to connect
with X "Pair"
• Pass key (PIN) may be required depending
on the Bluetooth® device to be connected
to.
X "Edit phone name"
Enter a name X "Save"
Data Communication
205
When answering pairing request from
another device
Note
• Even for devices requiring pass code
(PIN) when pairing, once pairing is
performed, it is not necessary to enter
the pass code (PIN) to reconnect after
disconnected as long as the paring is not
canceled.
• You can set pairing even if it is a
device unable to connect such as an
incompatible proﬁle. However, it cannot
be connected even if you tap the device.
• Tap
on the paired device X
"Connection access" to select whether to
always conﬁrm automatic connection or
not.
• Devices that are not compatible with
SCMS-T cannot play data such as music
data despite the types of audio related
data.
206
Data Communication
When a screen asking for pairing when
connecting Bluetooth® communication is
displayed, tap "Pair" or enter pass code (PIN) if
required, then tap "OK".
Disconnecting
Tap the device you want to
disconnect from "PAIRED DEVICES"
list X "OK"
Canceling pairing
Tap
beside the device that you
want to unpair from the "PAIRED
DEVICES" list X "Unpair"
Sending/Receiving Data via
Bluetooth® Function
• Turn on Bluetooth® function beforehand to
make this terminal detectable.
Sending data via Bluetooth® function
You can send data of phonebook (name card data
in vcf format), ﬁles such as photos or videos, etc.
to another Bluetooth® device (PC etc.).
• For sending, perform the operation from
the menu such as "Share"/"Send" of each
application.
Example: Sending a photo from Gallery
Pairing/connecting this terminal
with another Bluetooth® device
(P205)
From the Home screen, "Apps" X
"Gallery" X select and display the
photo you want to send
X "Bluetooth" X select a
Bluetooth® device
Receive the data by following the
on-screen instructions on the device
of the recipient
Receiving data via Bluetooth®
function
Pair/connect (P205) this terminal
with another Bluetooth® device
The data is sent from the other
Bluetooth® device
Tap "Accept" when Bluetooth®
authorization request screen is
displayed on this terminal
•
appears in the status bar, and data
reception starts.
• You can conﬁrm data reception on the
notiﬁcation panel.
• Message screen appears at the bottom
screen after receiving data.
Data Communication
207
NFC Communication
NFC is short for Near Field Communication.
It is an international standard proximity
wireless communication system determined
by ISO (International Organization for
Standardization). This terminal enables noncontact IC card function, Reader/writer
function, P2P function, etc.
Use NFC function to transfer data with other
compatible devices.
• For holding over the other device, see P124.
208
Data Communication
Android Beam
You can transmit and receive data with a
device equipped with Reader/Writer, P2P
functions.
• Enable the Reader/Writer, P2P function and
place a check mark in "Android Beam".
• If NFC/Osaifu-Keitai is set to lock, Android
beam cannot be used.
• Depending on the application, Android beam
may not be used.
• We do not guarantee any communication with
a terminal equipped with Reader/Writer, P2P
functions.
• If terms of use screen is displayed when
sending or receiving data, conﬁrm the contents
and follow the on-screen instructions.
Transmitting data
Transmit ﬁles of browser webpages, contacts,
images and video to other NFC compatible
terminals.
Example: To transmit images from Gallery
Enable the Android beam function on
the receiving end terminal
Enable the Reader/Writer, P2P
function on this terminal and place
a check mark in "Android Beam"
(P168)
From the Home screen, "Apps"
X "Gallery" X select an image to
transmit
Align the
mark on this terminal
and the receiving end terminal, and
bring them close together
Tap beam share screen
Sending data
Enable the Android beam function on
the receiving end terminal
Enable the Reader/Writer, P2P
function on this terminal and place
a check mark in "Android Beam"
(P168)
Align the
mark on this terminal
and the transmitting end terminal,
and bring them close together
• The beam receiving starts.
•
is displayed in the status bar.
• Reception status can be conﬁrmed via
the notiﬁcation panel.
• After reception ends, a message is
displayed on the status bar.
• The beam share screen is displayed.
• The beam receiving starts on the
receiving end terminal.
Data Communication
209
External Device Connection
Connecting with a PC
You can synchronize data, such as music,
with "Windows Media Player" on your PC by
connecting this terminal with your PC via the
microUSB Cable 01 (optional), and drag and
drop the data to transfer it between the PC
and this terminal.
• To recognize this terminal on your PC, a
dedicated driver and Windows Media Player
11 or later are required.
- For details about how to download and
operate the dedicated driver, refer to the
homepage below.
http://www.lg.com/jp/support/softwaremanuals (In Japanese only)
- You can download the latest Windows
Media Player on Microsoft website.
http://windows.microsoft.com/en-us/
windows/download-windows-media-player
• Some functions such as shooting and playing
a video may not work while this terminal is
being connected with a PC.
• Some data may not be available due to copyright.
210
External Device Connection
Note
• To operate a ﬁle, operating environment
on PC side is shown as follows:
- OS*: Windows 8.1/Windows 8/
Windows 7/Windows Vista
- Windows Media Player: Windows Media
Player 11 or later
* We do not guarantee operations
conducted in environment with
upgraded OS or in added/changed
environment.
• Use a PC to back up the client's data
saved in the internal storage of this
terminal and microSD card.
• The data saved in the internal storage of
this terminal or microSD card from other
devices such as PCs may not be able to
display on this terminal. Also, the data
saved in the PC from this terminal may
not be able to display on other devices.
Connecting this Terminal with a PC
Insert the microUSB plug of microUSB
Cable 01 (optional) in the microUSB
connection terminal of this terminal
• Insert the microUSB plug horizontally with
USB mark facing up.
Using as Media Device
Connect this terminal and a PC with microUSB
Cable 01 (optional). This terminal is recognized
as a media device (MTP) and you can transfer
media ﬁles such as images, music or videos.
Connect this terminal to PC via
microUSB Cable 01 (P211)
Open the Notiﬁcation panel X
Conﬁrm "Media device (MTP)" is
displayed
• When "Send images (PTP)" is displayed,
"Send images (PTP)" X "Media device
(MTP)".
• If the "Install PC programs" screen is
displayed on this terminal, tap "Cancel".
Insert the USB plug of microUSB
Cable 01 in the USB port on PC
Operate the PC to transfer data
between the terminal and the PC
• This terminal is recognized automatically
on a PC.
Note
• While reading or writing the data, do not
disconnect the power.
• Do not unplug microUSB cable during reading
or writing data. Loss of data may cause.
External Device Connection
211
Using as Camera Device
Connect this terminal and a PC with microUSB
cable 01 (optional) and turn to Send images
(PTP) mode. You can transfer still images and
videos to the PC.
• Use the Send images (PTP) mode to transfer
the data to the PCs which do not support
MTP.
Connect this terminal to PC via
microUSB cable 01 (P211)
Open the Notiﬁcation panel X "Media
device (MTP)" X place a check mark
in "Send images (PTP)"
Connecting with Printer
You can print browser images or pictures with
a Wi-Fi® supported printer.
• For operation method about Wi-Fi® supported
printer, check the instruction manual.
• This terminal and the printer need to be
connected with either the same Wi-Fi®
network or the same Wi-Fi Direct®.
• The following ﬁle formats are compatible to a
Wi-Fi® supported printer.
■ File formats available to print out
Image ﬁle
• When "Install PC programs" screen is
displayed on this terminal, tap "Cancel".
212
Operate PC to transfer data
between the terminal and the PC
External Device Connection
jpeg, jpg, png, tiﬀ, gif, bmp,
x-ms-bmp, webp, wbmp
Wireless Print
Example: Printing out pictures from Gallery
From the Home screen, "Apps" X
"Gallery"
Select a picture you want to print
out
Follow the on-screen instructions
X "Print"
Connecting with Other
Devices
Timeout
When SmartShare Beam
is not being used, set the
time duration before it
turns oﬀ automatically.
Using SmartShare Beam
File
transfer
history
Display the list of all the
ﬁles which were sent/
received by SmartShare
Beam.
Help
Display Help.
Use SmartShare Beam to send or receive
contents.
Setting SmartShare Beam
Set to publish the contents on this terminal on
other client devices.
From the Home screen, "Apps" X
"Settings" X "More..." X "SmartShare
Beam"
Turn on "SmartShare Beam"
(Device
name)
Change the name of this
terminal which is displayed
on another device.
Storage
Set a destination to save
the received data.
Autoaccept
requests
When there is an request
from other clients, set to
allow automatically or not.
External Device Connection
213
Sending ﬁles to client device via
SmartShare Beam
You can send contents in this terminal to other
client devices.
Example: Sending pictures from Gallery
214
From the Home screen, "Apps" X
"Gallery"
Select a picture you want to send
X "SmartShare Beam"
Tap a device to send the picture
• When it is sent by Wi-Fi Direct®, turn
on the SmartShare Beam on the client
receiving device in advance.
• When it is sent by Bluetooth®, pair with
the client receiving device in advance.
• When the device is not displayed, tap
"Rescan" to scan the device.
External Device Connection
Receiving ﬁles to client device via
SmartShare Beam
You can receive contents from other client
devices.
When "File transfer" screen is
displayed, "Yes"/"Accept"
is displayed on the status bar. Data
reception starts.
• You can conﬁrm the reception condition
from notiﬁcation panel.
• When data is received, a message screen
is displayed at the bottom of the screen.
•
Connecting with TV
You can connect this terminal with a TV to
display videos and pictures.
• To connect this terminal with a TV, use a
commercially available SlimPort supported
cable or SlimPort supported accessory.
• HDMI terminal, HDTV terminal, VGA terminal
or DisplayPort terminal is necessary on the
TV being connected with.
• Depending on TV, the required SlimPort
supported cable or SlimPort supported
accessory may diﬀer.
• We do not guarantee any operations with
SlimPort supported cables and SlimPort
supported accessories.
• Connect from TV side in order.
• To connect with a TV, refer to the instruction
manual of TV or SlimPort supported cable, or
the instruction manual of SlimPort supported
accessories.
• To connect a SlimPort supported accessory,
refer to the instruction manual of SlimPort
supported accessories.
• When connecting this terminal with a
SlimPort supported accessory, conﬁrm the
direction of the microUSB plug and insert it
horizontally.
Note

• Video or audio may not be output properly
when connecting with a TV which does
not support HDCP. Depending on the
contents, some may not allowed to output
from the content provider, some may be
checked on due to the functional issues.
• When starting outputting, images may
not be displayed properly due to output
mode switch problem depending on the
TV being connected with. In that case,
switch input mode by TV remote.
• Depending on the TV being connected
with, data output from this terminal may
not be able to show full size. Change the
TV display setting to adjust it.
• When connecting with a SlimPort
supported cable, hold the SlimPort
supported cable and do not lift this
terminal.
• When not displaying on TV, remove the
SlimPort supported cable or SlimPort
supported accessory.
• When connecting a cable, signal may get
inﬂuenced by your using environment.
External Device Connection
215
Displaying on Wi-Fi® Miracast
Supported Device via Wi-Fi®
Connection
Connect this terminal and a Wi-Fi® Miracast
supported device via Wi-Fi® connection to show
videos and pictures on TV or on a display.
• Turn on Wi-Fi® function beforehand.
216
From the Home screen, "Apps" X
"Settings" X "More..." X "Miracast"
Turn on "Miracast"
Tap a Wi-Fi® Miracast supported
device
• Tap "Search for devices" if the Wi-Fi®
Miracast supported device you want to
connect is not displayed.
External Device Connection
Disconnecting Wi-Fi® Miracast
supported device
Tap a device to disconnect X "OK"
Note
• Video or audio may not be output properly
when connecting with a device that does
not support HDCP. Depending on the
contents, some may not be allowed to
output from the content provider, some
may be checked on due to the functional
issues.
• When you have an incoming call during
connection, the incoming call screen is
also displayed in the connected device.
• For some applications, contents are
displayed in the connected device.
Operations such as playback in this
terminal are available.
Using Overseas
Overview of International
Roaming
The international roaming service allows you
to use your terminal in the service areas of
overseas operators aﬃliated with XXX, with
the same phone number and email address.
Calls and SMS can be used without changing
settings.
● Available network
This terminal is placed in class 5. You can
use it in LTE network, 3G network and GSM/
GPRS network service areas. It can also be
used in countries/regions supporting 3G
850MHz/GSM 850MHz networks. Please
check the information about the available
areas.
Note
• For country codes/international call
access codes/universal number
international preﬁx, supported countries/
areas and network operators, refer to
website.
Using Overseas
217
Available Service
Overseas
Before Using Overseas
Conﬁrming before Departure
Main
communication
service
3G
3G850
GSM
(GPRS)
LTE
Calls
○
○
○
×*2
SMS
○
○
○
○
Email*1
○
○
○
○
Browser*1
○
○
○
○
（○ : Available ×: Unavailable）
*1
*2
To use data communication when roaming,
turn ON the data roaming settings (P219).
Calls via 3G.
Note
• Some services are not available depending
on the overseas network operator or network.
• Conﬁrm the name of the network operator
being connected on the notiﬁcation panel
(P70).
218
Using Overseas
Before using this terminal overseas, check the
following information in Japan.
● Contract
• Check whether you have applied for
WORLD WING. For more details, contact
"General Inquiries" on the back cover of this
instruction manual.
● Battery Charge
• About charging, see website.
● Charges
• Fees are charged diﬀerently (call fee,
packet communication fee) for overseas
use from the charge in Japan. For details,
see website.
• Auto communication may start depending
on the applications you use, therefore
packet communication fees may become
high. Ask the supplier for operating
conditions of each application.
Pre-conﬁguring
● Network service conﬁguration
If you have subscribed Network service,
voice mail service, call forwarding service,
number notiﬁcation service, etc. are available
overseas. However, some network services
are unavailable.
• Starting "Remote operation settings"
service is required when using networks
service overseas. You also can set "Remote
operation settings" after arriving abroad.
- From Japan (P96)
- From overseas (P225)
• Network service may not be available to
use depending on the network operator
you are using abroad even if you can set or
cancel the settings.
Conﬁrming Overseas
When you arrive at overseas, this terminal
automatically connects to an available network
operator when it is powered on.
● About connections
Place a check mark in "Choose automatically"
of "Network operators" to select the optimum
network automatically.
Settings for Using Overseas
Setting data roaming
To perform packet communication overseas,
you need to turn on data roaming.
From the Home screen, "Apps" X
"Settings" X "More..." X "Mobile
networks"
"Data roaming" X conﬁrm notes
screen and tap“OK”
Setting a network operator
While purchasing, this terminal is set to detect
the available networks automatically and
switch to it. When setting up manually, set the
following settings.
From the Home screen, "Apps" X
"Settings" X "More..." X "Mobile
networks" X "Network operators" X
"Search networks"
• Search and display available networks.
• When an error occurs during the network
search, turn oﬀ "Data enabled" and
perform it again (P165).
Select a network of network operators
Using Overseas
219
Setting network mode
From the Home screen, "Apps", X
"Settings" X "More…" X "Mobile
networks" X "Preferred network
type"
"LTE/3G/GSM(Auto)"/"LTE/3G"/
"3G/GSM"/"3G"/"GSM"
About date & time
If you place a check mark in "Auto-date & time"
and "Auto-time zone" in "Date & time", the time
and time zone of this terminal's clock will be
automatically changed when information about
the local time and time zone is received from
the network of the overseas operator to which
you are connected.
• The automatic time/time zone setting may
not work properly depending on the overseas
operator. In that case, set the time zone
manually.
• The timing of these changes may diﬀer
depending on the overseas operators.
• "Date & time" → P190
220
Using Overseas
Inquiries
• If your terminal or nano UIM card is lost or
stolen overseas, contact XXX immediately
from your current location and carry out the
procedure to suspend usage. For contact
information, refer to the back cover of this
manual. Please note that you are liable for
any call or communication charges incurred
after the loss or theft of this terminal.
• You will need the country's "international
call access code" or "universal number
international preﬁx" if calling from a land-line
phone overseas.
How to Make and Receive
Calls at Your Location
• The country name set in "Country code"
of "International dial assist" is displayed in
the above . For example,
in case of "Japan" (+81), "Call to Japan"
is displayed.
Making Calls to Other
Countries (including Japan)
You can use the international roaming
service to make calls to other countries while
overseas.
• For information of available countries or
network operators, see website.
From the Home screen, "Phone" X
"Dial" tab
Enter "+" (touch and hold down "0" )
X country code X area code X other
party's phone number in order
X "Call to "/"Call without int'l preﬁx"
Tap "End call" to end the call
Note
• When placing a check mark in "Automatic
conversion function" of "International dial
assist", enter a number starts from area
code the same as when you call in Japan
X tap "Converted number".
• If the area code begins with "0", remove
the ﬁrst "0" when entering the number.
However, "0" may be required in some
countries and regions such as Italy.
Using Overseas
221
Making a Call Domestically
You can make a call to the other party's landline phone or a mobile phone in the same way
as in Japan.
From the Home screen, "Phone" X
"Dial" tab
Enter the other party's phone
number
• To make a call to a land-line phone, enter
the area code and the other party's phone
number.
222
Tap "End call" to end the call
Using Overseas
Making a Call to WORLD
WING Users
When the other party that you are making a
call to is a WORLD WING user, make a call as
if you are making an international call to Japan
even if the other party is in the country in
which you are staying.
• Dial "+" and "81" (country code of Japan)
ﬁrst and then dial the phone number omitting
the "0" at the beginning as if you are making
a call to Japan because the call is routed
through Japan regardless of the destination.
Receiving Calls Overseas
You can receive calls in the same way as in
Japan.
Note
• When you receive a call while using the
international roaming service, the call
is forwarded internationally from Japan,
regardless of the country from which
the call is made. The call is charged
the same as the call to Japan, and the
receiver is charged the incoming call
charge.
• Even if the other party has made a call
with notiﬁcation of the Caller ID set,
you may not be notiﬁed of the Caller ID
depending on the overseas operator.
Also, the number you are notiﬁed of may
diﬀer from the other party's Caller ID
depending on the network that the other
party is using.
• "Reject call setting" may not be declined
during use overseas (P96).
Making a Call from Other
Parties
● Having the other party call you overseas
from Japan
Have the other party call you by dialing your
phone number in the same way as you do
when you are in Japan.
● Having the other party call you overseas
from a country outside Japan
You need to have the other party dial the
international call access code and "81"
regardless of the destination because the
call is routed through Japan.
International call access code of the country
in which the caller is staying is -81- 90 (or
80, 70) -XXXX-XXXX
Using Overseas
223
Setting International
Roaming
International Automatic
dial assist
conversion
function
Setup to use the international roaming service
or international phone calls.
• Depending on the overseas network operator,
roaming cannot be setup in some cases.
224
From the Home screen, "Phone"
X X "Call settings" X "Roaming
settings"
Change the settings if necessary
Restricting incoming
calls
During the international
roaming, set to restrict
the incoming calls or not.
Incoming notiﬁcation
while roaming
During the international
roaming, set to notify the
incoming calls via SMS
or not when in places
out of service, etc.
Roaming guidance
During the international
roaming, the
notiﬁcation that you
are being overseas will
be sent to the caller.
Using Overseas
Set ON/OFF
of Automatic
conversions.
• When it is turned
on, an international
dial assist screen
appears for calls
with "+" entered at
the beginning of the
phone number. Tap
"International call"
to convert "+" to an
international access
code registered in
"International preﬁx".
Country
code
Add country code for
international call.
International
preﬁx
Add preﬁx
international access
code for international
call.
Network
service
Remote
operation
(charged)
Caller ID
notiﬁcation
request
service
(charged)
Roaming
call
notiﬁcation
(charged)
Roaming
guidance
(charged)
Voice
mail
(charged)
Set network services
such as voicemail
from overseas.
• Activate "Remote
operation settings"
beforehand.
• For operations
from overseas,
international call
fee to Japan in the
country you use is
charged.
• Depending on
overseas network
operators, you
cannot make the
settings.
After Returning to
Japan
When you return to Japan, this terminal
automatically connects to the network. If it
is unable to connect, change the following
settings.
• Set "Preferred network type" to "LTE/3G/GSM
(Auto)" (P220).
• Place a check mark in "Choose automatically"
of "Network operators" (P219).
Call
forwarding
(charged)
Using Overseas
225
Appendix/Index
Troubleshooting (FAQs)
Troubleshooting
• First, check whether software update is
required. If so, update the software (Software
Update → P240).
• If it does not improve after conﬁrming the
check items, contact "Repairs" (in Japanese
only) on the back cover of this manual or a
repair counter speciﬁed .
■ Power supply
Symptom
Power does
not turn on
226
Check item
• Is the battery pack installed
correctly? → P46
• Is the battery dead?
→ P47
Appendix/Index
■ Charging
Symptom
Check item
Cannot
charge
notiﬁcation
LED light
does not light
up or blink
• Is the battery pack installed
correctly? → P46
• Is the adapter plug and
cigar lighter plug properly
inserted into power outlet
or cigar lighter socket?
• Are the adapter and this
terminal set properly?
• When using the AC adapter
(optional), is the AC adapter
ﬁrmly connected to this
terminal?
• Any call or data
communication while
charging, or using other
functions for a long time
may result in this terminal
getting hot and Notiﬁcation
LED light may blink. In this
case, charge again after
this terminal cools down.
■ Terminal operations
Symptom
Check item
Becomes
hot during
operation or
charging
• While operating or
charging, or if you operate
applications or watch
TV for a long time while
charging, the terminal,
battery pack or adapter
may become hot. There is
no operation problems and
you can continue to use it.
Battery life is
short
• This terminal, internal
battery or adapter may
become hot during
operations or charging, or
when shooting videos or
using 1Seg for a long time
while charging. This is not
an operation hazard, so you
can continue using them.
• The operating time of
the battery pack varies
depending on the operating
environment and the
secular degradation of the
battery pack.
Symptom
Check item
Battery life is
short
• The battery pack is a
consumable accessory.
The usage duration of
the battery per 1 charge
decreases gradually
each time the battery
is recharged. When the
operation time is too short
even if the terminal is
fully charged, purchase a
new battery pack of the
speciﬁed type.
Power is
automatically
turned
oﬀ or the
terminal is
automatically
restarted.
• If the contacts of battery
pack are dirty, the contact
may become poor and the
power may shut oﬀ. When
it is dirty, clean the battery
pack with a dry cotton
swab etc.
No reaction
when tapping
the touch
screen or
pressing the
keys
• Has the screen been
locked? → P175
• Is the power oﬀ?
→ P50
Appendix/Index
227
228
Symptom
Check item
Slow reaction
when tapping
the touch
screen or
pressing the
keys
• It might occur if a large
amount of data is saved
in terminal or data with
extremely large size are
processed between this
terminal and microSD card.
The nano UIM
card is not
recognized
• Is the nano UIM card
inserted in the right
direction? → P45
Clock is
wrong
• Clock may become wrong if
the power has been turned
on for a long time.
Check if it is set to "Autodate & time", move to a
place with better reception
and power it on. → P190
Appendix/Index
Symptom
Terminal
operation is
unstable
Check item
• It may be caused by
applications installed to the
terminal after purchase. If
problems improve when you
start in Safe mode (a function
to activate the terminal in
a mode similar to default),
problems may be improved by
uninstalling the application.
- How to activate Safe mode
1. While in the power
OFF status, press and
hold the power key for
over two seconds.
2. After the logo
appears, press and
hold the volume key
(down) until the Home
screen appears.
* Press the power key
for over two seconds
with the power turned
on X touch and hold
down "Power oﬀ" X
"OK" to activate.
Symptom
Terminal
operation is
unstable
Application
does not
work properly
(cannot be
activated
or an error
occurs)
Check item
When Safe mode
starts, "Safe mode"
appears on the bottom
left of the screen.
* To stop Safe mode,
turn the power OFF
once and restart it.
- Before starting Safe
mode, backup necessary
data.
- Widgets that you have
created may be gone.
- Safe mode is not the
normal starting condition,
so stop Safe mode before
normal usage.
• Is there a disabled
application?
Try again after enabling the
disabled application.
→ P182
■ Calls
Symptom
Check item
Cannot make
a call even if
the call key
has been
tapped
• Is this terminal in Airplane
mode? → P165
The ringtone
does not
sound
• Is the ringtone volume set
to minimum? → P171
• Is it set to public mode
(power OFF) or manner
mode (Vibrate only, Do
not disturb)? → P96,
P171
• Has the unregistered call
reject been set? → P96
• Is the ring time for the
Voice Mail Service or Call
Forwarding Service set to
"0 sec."? → P95
Appendix/Index
229
230
Symptom
Check item
Calls are not
connected
( does not
disappear
when you
move, or
calls cannot
be made or
received even
when the
radio wave
is strong
enough)
• Turn the power oﬀ and on,
or remove and attach the
battery pack or nano UIM
card.
• Due to the radio wave
types, making/receiving
calls may be unavailable
even with state of "in the
service area" and even when
radio wave is indicated as
. Move to the other place
and call again.
• Has the unregistered call
reject been set? → P96
• Due to the crossing
of radio waves, at the
crowded public places,
calls/mails are crossed
and the connection status
may not be good. In that
case, "Please wait for
a while(Voice service)"
appears and calling sound
is played. Move to other
place or call again at other
time.
Appendix/Index
■ Screen
Symptom
Check item
The display is
dim
• Has the screen backlight
timeout been set?
→ P173
• Has the screen brightness
been adjusted? → P173
• Is the battery level low?
→ P47
• Has power safe been set?
→ P180
■ Sound
Symptom
During a
voice call,
the other
party's voice
is diﬃcult to
hear or is too
loud
Check item
• Has the call volume been
adjusted with the volume
key? → P90
■ TV (Full seg/1Seg)
■ Mail
Symptom
Check item
Symptom
Email is not
received
automatically
• Is there a check mark in
"Email" of "Account & sync"?
Place a check mark in it.
→ P111
• Do you set "Update
schedule" to "Manual"? Set
Sync schedule. → P110
Cannot watch
TV (Full
seg/1Seg)
• Are you at a location that
is outside of the digital
terrestrial broadcast
service area, or where the
broadcast wave is weak?
• Are the channels
conﬁgured? → P137
Can be
viewed
images, but
there is no
audio
• For devices that do not
support SCMS-T, the TV
sound cannot be heard (Full
seg/1Seg).
• Cannot
obtain
screenshots
on TV (Full
seg/1Seg)
• QMemo+
background
does not
show up in
the TV
• To protect the TV (Full
seg/1Seg) copyright, the
screenshot and QMemo+
function are restricted.
It is not an abnormal
performance.
■ Camera
Symptom
Photos and
videos shot
with the
camera are
blurred
Check item
• Check whether the lens are
cloudy or have dirt on it.
Check item
Appendix/Index
231
■ Osaifu-Keitai
232
■ Overseas use
Symptom
Check item
Symptom
Osaifu-Keitai
cannot be
used
• If you remove the battery
pack or activate Omakase
Lock, Osaifu-Keitai function
cannot be used regardless
of NFC/Osaifu-Keitai lock
settings.
• Is NFC/Osaifu-Keitai set to
lock? → P125
• Did you swipe the
mark
of this terminal over the
reader? → P124
This terminal
is not
available to
use overseas
Appendix/Index
Check item
■ Antenna mark appears
• Have you applied for
WORLD WING?
Check whether you have
applied for WORLD WING.
■ Icon which indicates out of
service area appears
• Are you at a location that is
outside of the international
roaming service area, or
where the signal is weak?
See website for whether it is
an available service areas or
overseas network operator.
• Try to change the settings
of network or overseas
network operator.
- Set "Preferred network
type" to "LTE/3G/GSM
(Auto)" → P220
- Place a check mark in "Choose
automatically" of "Network
operators". → P219
• Turn oﬀ this terminal and then
turn it on again. → P50
Symptom
Check item
Data
communication
is not available
overseas
• Set Data roaming to ON.
→ P219
This terminal
has become
unusable
suddenly
while using
overseas
• Has the approximate
limit of usage fee been
exceeded?
For "International roaming
service (WORLD WING)",
the approximate limit
of usage fee is set in
advance. If the limit is
exceeded, pay oﬀ the
usage fee to resume
services.
Symptom
Check item
The other
party's
number is not
displayed/
A diﬀerent
number is
displayed/
The
registered
Phonebook
or Caller ID
notiﬁcation
does not
operate
properly
• Even if the other party
has made a call with
notiﬁcation of the Caller
ID set, you may not be
notiﬁed of the Caller ID
depending on the network
or network operator. Also,
the number you are notiﬁed
may diﬀer from the other
party's Caller ID depending
on the network or network
operator you use.
Appendix/Index
233
■ Data management
234
■ Bluetooth® function
Symptom
Check item
Symptom
Data transfer
is not working
• Are you using a USB HUB?
If you use a USB HUB,
data transfer may not work
properly.
The data
saved on
a microSD
card is not
displayed
• Remove and attach
microSD card. → P198
This terminal
cannot
ﬁnd/be
connected to
a Bluetooth®
compatible
device
When trying
to view an
image,
appears or
appears in
preview
•
• Put the Bluetooth®
compatible device
(commercial) on standby
and register it on this
terminal. If you want to
delete a registered device
and register it again as
a new device, you must
delete the registered
device from both the
Bluetooth® compatible
device (commercial) and
this terminal before you
register it again. → P205
Cannot make
calls from this
terminal when
connected to
an external
device, such
as a car
navigation or
hands free
device
• If you attempt to call
somebody several times
when he or she does not
answer or is out of the
service area, calls to that
number may be disabled.
In this case, turn oﬀ this
terminal and then turn it
back on again.
may appear if image data
has been destroyed.
Appendix/Index
Check item
■ Map and GPS Function
Symptom
AUTO-GPS
service
information
cannot be
set.
Check item
• Check if the AUTO-GPS
function is deactivated due
to low battery power.
• Check if the AUTO-GPS
function is deactivated
due to low battery power.
If the AUTO-GPS function
is deactivated by the "Lowpower operation settings",
the AUTO-GPS service
information cannot be
set. In that case, change
the "Low-power operation
settings" to "Not suspend"
or charge the battery to set
it. → P182
• Check if the AUTO-GPS
operation setting is turned
OFF. → P182
Error Message
Error Message
Description
No SIM card
The nano UIM card is
not working properly.
If the problem is not
resolved by removing
and reinserting the
nano UIM card, contact
"Repairs" (in Japanese
only) on the back cover
of this manual.
No service
You cannot use this
terminal because it is
out of the service area
or it is in a place where
there is no signal
reception. Move to a
location where you can
get signal reception.
PIN1 code blocked
Enter PUK
Enter your PIN unblocking
key correctly. → P187
Appendix/Index
235
236
Error Message
Description
• Not enough
space on all
storage. To free
up space, delete
some ﬁles.
• If you keep using,
some functions
and applications
may not be
operated. Try to
free space by
deleting items,
such as apps or
media content.
It is displayed when
there is not enough
space to save a
ﬁle, application or
media contents, or to
operation part function
or application. You can
delete ﬁles or media
contents or uninstall
applications to ensure
the enough space.
→ P122, P201
• Please wait for
a while(Voice
service)
• Please wait for
a while(Data
service)
This is displayed when
audio/data services are
restricted due to heavy
traﬃc.
Re-operate after the
restrictions have been
cancelled.
Appendix/Index
Error Message
Description
Invalid recipient
The phone number
or contact entered
in SMS recipient is
invalid. The phone
number unavailable to
use as a recipient or a
contact has not been
registered in Contacts
is entered. Enter the
correct phone number
or contact.
Cannot enter more
recipients.
You cannot add more
than one recipient
in SMS. Only enter
one recipient to send
messages.
Cannot enter more
letters.
The message is over
the character number
limit. Unavailable to
input anymore. keep it
within the limit number.
Cannot send
message
Cannot send SMS due
to network problem.
Conﬁrm network ﬁrst.
Error Message
Description
Login information
incorrect. Try again
When setting up Email
account, an incorrect
Email address or
password has been
input. Input the correct
Email address or
password.
Network unavailable
When setting up Email
account, it cannot
access to the server
due to the abnormality
of the network. Conﬁrm
the network state.
Optimizing app XX
of XX .
This may take
longer depending
on apps. Please
do not remove
the battery until
complete.
This will display when
you are notiﬁed of the
application formats
up to kitkat being
converted into the
Lollipop application
format. Do not remove
the battery pack before
the work is ﬁnished.
Warranty and AfterSales Service
Warranty
• Be sure to receive a warranty at the time of
purchase of this terminal. Read contents of
the warranty and conﬁrm information such
as " 販売店名・お買い上げ日 (shop name and
date of purchase)" and keep it in a safe
place. If necessary items are not described,
immediately contact the shop of purchase.
The warranty for free repair is valid for one
year from the date of purchase.
* Back Cover L40, Battery Pack L24, TV
Antenna Cable L01 and Mickey Window
Cover L01 are excluded in the free repair
warranty.
• The speciﬁcation ｓ and appearance of this
terminal, including the accessories in this
package are subject to change for better
without notice.
• Data saved in Phonebook, etc. may be
modiﬁed or lost due to the malfunction, repair
or other handling of this terminal. You should
therefore make a copy of the Phonebook
data, etc. as a precautionary measure.
Appendix/Index
237
* Phonebook data can be saved on microSD
card in this terminal.
* Data such as phonebook entries can be
backed up using cloud.
After-Sales Service
When this terminal breaks down
Before repair, read "Troubleshooting" in this
manual for detailed information. If the problem
still persists, contact "Repairs" (in Japanese
only) on the back of this manual.
Repairs
Bring your terminal to a repair counter
speciﬁed Repairs are accepted during business
hours of a repair counter. Also, you must bring
the warranty. Note that it may take some
days to repair this terminal depending on the
malfunction state.
■ During the warranty period
• This terminal is repaired at no charge under
the conditions of the warranty.
• Make sure to bring the warranty for
repair. You will be charged even during
the warranty period if the warranty is not
presented or the trouble or damage is
238
Appendix/Index
caused by your inappropriate handling
(such as damage to external connection
terminals, earphone/microphone jack, LCD,
etc.), or when it is not repaired by a repair
counter speciﬁed.
• You will be charged even during the
warranty period if malfunction is caused by
the use of devices and consumables other
than those speciﬁed.
■ Repair may not be possible in the following
cases
• When, as the result of inspection,
corrosion is found due to exposure to
water, condensation or sweat, or any of the
internal boards are damaged or deformed
(damage to the external connection
terminals, earphone/microphone jack, LCD,
or cracked body could be the case as well).
• When it is not repaired by a repair counter
speciﬁed by.
* Since these conditions are outside the
scope of the warranty, any repairs, if at all
possible, will be charged.
■ After expiration of the warranty
All repairs that are requested are charged.
■ Replacement parts
Replacement parts (parts required to
maintain functions) will in principle be kept
in stock for 4 years after termination of
production. However, depending on the
malfunctioning part, repair may not be
possible due to a lack of replacement parts.
Even after the stock period has expired, the
repair of some malfunctioning parts may
be possible. Therefore contact "Repairs" (in
Japanese only) on the back of this manual.
Precautions
• Never modify this terminal or accessories.
- Doing so may result in ﬁre, injuries or malfunctions.
- The modiﬁed terminal may be repaired only
if the owner agrees on that all the modiﬁed
parts are restored to the original conditions.
However, repairs may be refused depending
on the modiﬁcations.
The following cases may be considered as
modiﬁcations.
・Put sticker on display or key
・Decorate this terminal by adhesive agent
・Exchange to parts such as cover other
than those speciﬁed
- Malfunction and damage due to
modiﬁcations will be repaired at the owner's
expense even during the warranty period.
• Note that the settings and other information
may be cleared (reset) as a result of
malfunction, repair or other handling. In this
case, make the settings again.
• When the repair is executed, MAC address
of Wi-Fi®/Bluetooth® address in this terminal
may be changed regardless of repaired part.
• Magnetic components are used in the parts that
are described below. Do not allow cash cards or
other devices that are vulnerable to magnetism
to come into contact with the phone.
Place: speaker, mouthpiece (receiver), vibrator
(left side of power key)
• Although this terminal is waterproofed, if the
inside of this terminal has gotten wet or moist,
immediately power oﬀ this terminal and remove
the battery pack, and bring it to speciﬁed repair
oﬃce as soon as possible. However, note that
it may not be repaired depending on the extent
of the damage.
Appendix/Index
239
Memory dial (Phonebook function)
and downloaded data
When you change the model or repair this
terminal, data that has been imported,
downloaded or created by you may be
changed or lost. XXX shall have no liability for
any change or loss of any kind. Under some
circumstances, XXX may replace your terminal
with its equivalent instead of repairing it. In this
case, most data from the old terminal cannot
be transferred to the replacement terminal.
240
Appendix/Index
Software Update
About Software Update
The software update is a function which you
can connect to the network and conﬁrm if an
update is required. It downloads the update ﬁle
as required and installs it.
When the update is necessary, follow the
(software update) on the
instructions from
status bar, or visit website.
The following contents are included in the
software update. In order to use this terminal
safely and comfortably, please make sure to
update to the latest version.
• Function improvement, new functions
• Easier to operate
• Quality improvement
• New security patch
Note
• The update can be run with the data saved
in this terminal. However, the data may not
be protected depending on your terminal
conditions (malfunction, damage, getting
wet, etc.). It is recommended to back up
necessary data beforehand. Please note that
some data cannot be backed up.
Precautions
• Once updating your terminal, you cannot
downgrade to any former software.
• When updating, the original information about
this terminal (type, built number, etc.) will be
sent to our server automatically. We do not
use the sent information for purposes other
than Android upgrade.
• When the packet communication is used via
XXX, communication fee does not occur while
downloading.
• To update via packet communication, a
contracted nano UIM card is necessary. Also
depending on the update contents, when
packet communication is used, subscription
to sp-mode is required.
• During the installation, you cannot make
a phone call, receive an incoming call, use
communication functions or other functions.
• All key operations are disabled during the
update. The update cannot be stopped either.
• After ﬁnishing the update, it will be restarted.
• Part of the settings may be initialized after
the update, set them up again.
• If a PIN has been set, the PIN entry screen
appears during the restart after rewriting and
you are required to enter your PIN.
• Consult a repair counter speciﬁed when
update fails and all operations are disabled.
• SMS sent during a software update are
stored at an SMS center.
• It may take time to update.
• The following situations make it unavailable
to update.
- When you are on a call
- When out of the service area is displayed
- When it is tethering as a main device
- When the date or time has not been set
correctly
- Remained battery is not enough
- Free space in this memory is not enough
- When the basic software is being changed
to an unauthorized one
• Exit all applications before updating.
Appendix/Index
241
• Make sure to upgrade with battery fully
remained.
• Do not power oﬀ or remove the battery pack
during update.
• It is recommended that this terminal be put in
a place with good reception and not be moved
while downloading. The update may stop
when it is put in a place with bad reception.
• When the download via Wi-Fi® starts, ﬁnish
the download without moving it out of
the Wi-Fi® environment. If the download is
discontinued due to the Wi-Fi® disconnection,
"Download stopped【Reason】・No Service"
may be displayed on the screen even when
the communication via XXX has been
connected. In that case, download it again
with Wi-Fi® environment.
• When it does not need to update, "No upgrade
is needed. Use it as it is." is displayed.
242
Appendix/Index
Updating Software
When this terminal needs to update, the update
ﬁle will be downloaded automatically, and the
(Software
installation will then be reserved.
Update) is displayed on the status bar.
When it is purchased, the setting of
automatically reserving installation is set to
"ON".
• Depending on the update contents, it needs
you to install it without installation being
reserved.
Drag or swipe the status bar downward
to open the notiﬁcation panel X tap a
notiﬁcation X "Install".
• When changing the auto update settings,
from the Home screen "Apps" X "Settings" X
"About phone" X "Update Center" X "Software
Update" X "ON"/"OFF" in "Auto Update".
• When "Auto Update" is "OFF", operate "When
the icon is not displayed on status bar"
(P243).
Changing installation reservation
time
When the icon is not displayed on
status bar
You can change the reserved time yourself.
Follow the procedures below to update.
■ Install immediately
Drag or swipe the status bar
downward to open the notiﬁcation
panel X tap a notiﬁcation
"Start Update" X "OK"
■ Changing the reserved time
Drag or swipe the status bar
downward to open the notiﬁcation
panel X tap a notiﬁcation
"Change start time" X enter the time
X "OK"
• When you do not change the reserved
time, tap "OK" to go back to the Home
screen.
From the Home screen, "Apps"
X "Settings" X "About phone"
X "Update Center" X "Software
Update" X "Start Update"
• When there is a update ﬁle, the update starts.
After the download ﬁnished, "Start
installing" X "OK"
• The installation starts.
• If the "OK" was not tapped, the installation
starts after 10 seconds.
• Depending on the update contents, a
conﬁrmation screen about the update
appears after tapping "Start Update".
• After the conﬁrmation screen appears,
follow the step a and b.
a Select an update method
• "Perform now(only via Wi-Fi)": Download
the update ﬁle immediately via Wi-Fi®.
• "Perform at scheduled time(via XXX)":
Download the update ﬁle at the reserved
time automatically via Wi-F® or XXX.
* When it cannot be downloaded via
XXX, "Perform at scheduled time(only
via Wi-Fi)" appears.
Appendix/Index
243
b Select "Download and install" or
"Download"
• "Download and install": After the
download is ﬁnished, the installation is
implemented automatically.
• "Download": Even after the update ﬁle
has been downloaded, the installation
is not implemented automatically. To
install, you need to implement the
installation yourself.
Note
• When the software in this terminal is the
latest one, "No upgrade is needed. Use it
as it is." appears.
• If the download is discontinued, the
downloaded data till then will be stored
for up to 14 days. To continue to
download, tap
(Downloading update ﬁle
stopped) on the notiﬁcation panel.
• When "Perform at scheduled time" is
selected, the download time is set up
automatically. The start time cannot
be changed. When you do not want to
download at the time automatically set,
"Software Update" X "Back" and select
"Perform now(only via Wi-Fi)" to download
the update ﬁle.
244
Appendix/Index
Application Update
■ After the update, check if there are any
application updates. If the applications are
not updated, the performance will not be
stable, or the functions are improper. Please
make sure to update to the latest version.
• Update from the notiﬁcation icon
After the update is ﬁnished, restart this
terminal and the notiﬁcation icon
(Updating has been completed) will appear.
Drag or swipe the status bar downward to
open the notiﬁcation panel X "Updating
has been completed" X "OK", update the
applications from the update list.
• Update from Play Store
From the Home screen, "Play Store" X
X "My apps" to update each application.
■ About OS version information of each
application, conﬁrm where the application is
provided.
Setting Updates
Application Update
Conﬁgures settings for download of
applications, update notiﬁcation cycles, and
automatic updates provided by LG Electronics
Inc. Application can be updated via LTE/3G
connections or via Wi-Fi® connections.
• For precautions on application update, refer
to "Precautions" (P241) of software update.
• For the latest software information, refer to
LG Electronics website.
http://www.lg.com/jp/support/softwaremanuals (In Japanese only)
Downloads
From the Home screen, "Apps"
X "Settings" X "About phone" X
"Update Center" X "App Updates"
From the Home screen, "Apps"
X "Settings" X "About phone" X
"Update Center" X "App Updates"
X "Settings"
Change settings if necessary
Update
notiﬁcation
cycle
Set to automatically check
whether there are updatable
apps, and set the notiﬁcation
cycles.
Autoupdate
apps
Set to automatically update
upgradeable apps or not.
• When "Legal Documents for LG Software"
screen is displayed, "Next" X conﬁrm
"Terms of Use for LG Software" and "LG
Software Privacy Policy", then place a
check mark X "Agree".
"Download"
Appendix/Index
245
Main Speciﬁcations
Terminal
Model name
KT1601
Size (H×W×D)
Approx. 144 mm×
Approx. 74 mm×
Approx. 9.6 mm
(Max. thickness:
Approx. 10.8 mm)
Weight
Approx. 149 g
Memory
ROM 16 GB*1
RAM 2 GB
LTE
Continuous
standby
time
Continuous
call time
246
Stationary (Automatic):
Approx. 550 hours
GSM
Stationary (Automatic):
Approx. 400 hours
3G
Approx. 950 minutes
GSM
Approx. 770 minutes
VoLTE
voice call
Approx. 990 minutes
AC adapter
05 (optional)
Approx. 140 minutes
DC adapter
04 (optional)
Approx. 140 minutes
Watch time
Approx. 340 minutes
1Seg
Record
time*2
Approx. 2640
minutes (saved in the
internal storage)
Watch time
Approx. 300 minutes
Full seg
Record
time
Approx. 70 minutes
(saved in the internal
storage)
Stationary (Automatic):
Approx. 460 hours
3G
Appendix/Index
Charging
time
Display
Type
TFT（Full HD IPS）
The number
of produced
colors
16,777,216 colors
Size
Approx. 5.2 inch
Resolution
Side 1080 pixels ×
Line1920 pixels
(Full HD)
Type
CMOS with ﬂash on
the back side
Size
Main camera: 1/3.0 inch
Front camera: 1/6.9 inch
Eﬀective pixels
Main camera: Approx.
13.2 million pixels
Front camera: Approx.
2.4 million pixels
Recorded pixels
(maximum)
Main camera: Approx.
13.1 million pixels
Front camera: Approx.
2.4 million pixels
Image
pickup
device
Zoom (Digital)
Up to approx. 8.0x
(90 levels)
(main camera only)
Wireless LAN
IEEE802.11 a/b/g/n
standard
(IEEE802.11n
frequency band: 2.4
GHz/5 GHz)
Bluetooth®
Compatible
version*3
Bluetooth® standard
Ver.4.0
Output
Bluetooth® standard
version Power Class 1
Bluetooth®
Earphone/
microphone
jack
*1
*2
*3
Line-of-sight
communication
distance*4
Within approx. 10
meters
Compatible
ﬁle*5
HFP, HSP, OPP, SPP,
HID, A2DP, AVRCP,
PBAP, PAN (PANNAP), PAN (PANU),
aptX, SBC
Terminal
diameter
3.5φ
Pole
number
4 poles
Since saving Android OS and preinstalled
applications requires memory space, the
amount does not indicate actual available
memory space.
For 1Seg, up to approximate 5 hours per
video can be recorded.
We conﬁrm that all Bluetooth® compatible
devices including this terminal are compliant
with Bluetooth® standards designated by
Bluetooth® SIG and are certiﬁed. However,
procedures may vary and data transfer
may not be possible, depending on the
characteristics and speciﬁcations of the
device that you connect to.
Appendix/Index
247
*4
*5
This varies depending on the obstacles
between the communicating devices and
the reception quality.
These are Bluetooth® standards that
provide speciﬁcations for communications
between Bluetooth® compatible device.
• Continuous call time is an estimate of the
battery life during a continuous call with
normal signal reception.
• Continuous standby time is an estimate
of the battery life during a continuous
standby with normal signal reception. In
certain circumstances, the standby time
may drop to as low as half the time shown
due to the battery charge, function settings,
temperature, or radio wave reception in the
area (no reception or weak).
• A use of the Internet reduces the actual
call (communication)/standby time. Even if
you do not perform communication or use
the Internet, composing emails, activating
application, using camera also reduces call
(communication)/standby time.
• Stationary continuous standby time is the
average battery life when you are stationary
with normal signal reception.
• Charging time is an estimate for charging an
empty battery pack with the terminal power
oﬀ. For charging with the terminal power on, it
takes longer.
Battery Pack L24
Battery type
Lithium-ion battery
Nominal voltage
3.8 V
Nominal capacity
2,920 mAh
TV Antenna Cable L01
Length
Approx. 140 mm
Weight
Approx. 8 g
Mickey Window Cover L01
Size
Flip
section
Vertical: Approx. 141 mm
Horizontal: Approx. 73 mm
Back cover
section
Vertical: Approx. 144 mm
Horizontal: Approx. 74 mm
Weight
248
Appendix/Index
Approx. 48 g
Languages compatible
■ Display languages
Japanese/English
* Azerbaijani/Indonesian/Malay/Bosnian/
Catalan/Czech/Danish/German/Estonian/
Spanish/Basque/French/Arabic/Croatian/
Icelandic/Italian/Swahili/Kurdish/Latvian/
Lithuanian/Hungarian/Dutch/Norwegian/
Uzbek/Polish/Portuguese/Romanian/
Slovak/Slovenian/Finnish/Swedish/
Vietnamese/Turkish/Greek/Bulgarian/
Kazakh/Serbian/Ukrainian/Georgian/
Armenian/Farsi/Nepalese/Marathi/Hindi/
Bengali/Punjabi/Gujarati/Tamil/Telugu/
Kannada/Malayalam/Sinhalese/Thai/
Burmese/Cambodian/Korean/Chinese
■ Input languages (enter a character)
Japanese/English/Korean
File format
This terminal supports the display or playback
of the following ﬁle formats.
Type
File formats
Audio
mp3, m4a, wav, ogg, amr, wma,
aac, mka, mid, ﬂac, isma, 3ga, xmf
Image
bmp, gif, jpeg, png, wbmp, webp
Video
mp4, 3gp, m4v, mkv, wmv, avi, ts,
ogm, webm, ismv, asf
Photos and videos are saved in the following
ﬁle formats.
Type
File formats
Photo
JPEG
Video
MP4
Appendix/Index
249
Estimate number of photos and video
■ Number of shooting photos (estimate)
Resolution
3120×3120
（9M）
KT1601
(main unit)*
Approx.1,900
microSD card
(1GB)
Max. approx.
250
The number of images when the ﬁle size is 4 MB.
* The number of saved images at the time of
purchase.
■ Video recording time (estimate)
Resolution
1920×1080
（FHD）
KT1601
(main unit)*
Max. approx.
28 minutes
(per video)
Max. approx.
54 minutes
(total)
microSD card
(1GB)
Max. approx.
7 minutes
* Estimate recording time at the time of purchase.
* The ﬁle size is restricted to 4 GB.
File size restriction is an auto support
function without being set by a customer.
250
Appendix/Index
Speciﬁc Absorption Rate
(SAR) of Mobile Phones
This model [KT1601] mobile phone complies
with Japanese technical regulations and
international guidelines regarding exposure to
radio waves.
This mobile phone was designed in observance
of Japanese technical regulations regarding
exposure to radio waves(*1) and limits to
exposure to radio waves recommended by a
set of equivalent international guidelines. This
set of international guidelines was set out by
the International Commission on Non-Ionizing
Radiation Protection (ICNIRP), which is in
collaboration with the World Health Organization
(WHO), and the permissible limits include a
substantial safety margin designed to assure
the safety of all persons, regardless of age and
health condition.
The technical regulations and international
guidelines set out limits for radio waves as the
Speciﬁc Absorption Rate, or SAR, which is the
value of absorbed energy in any 10 grams of
tissue over a 6-minute period. The SAR limit
for mobile phones is 2.0 W/kg. The highest
SAR value for this mobile phone when worn on
the body is XXX W/kg(*2). There may be slight
Radio Frequency (RF)
Signals
THIS MODEL PHONE MEETS THE U.S.
GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone contains a radio
transmitter and receiver.
Your phone is designed and manufactured not
to exceed the emission limits for exposure
to radio frequency (RF) energy set by the
Federal Communications Commission of
the U.S. Government. These limits are part
of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on
standards that were developed by independent
scientiﬁc organizations through periodic and
thorough evaluation of scientiﬁc studies.
The exposure standard for wireless mobile
phones employs a unit of measurement known
as the Speciﬁc Absorption Rate (SAR). The
SAR limit set by the FCC is 1.6W/kg.* Tests for
SAR are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certiﬁed power
level in all tested frequency bands. Although
the SAR is determined at the highest certiﬁed
252
Appendix/Index
power level, the actual SAR level of the phone
while operating can be well below the maximum
value. This is because the phone is designed to
operate at multiple power levels so as to use
only the power required to reach the network. In
general, the closer you are to a wireless base
station antenna, the lower the output.
Before a phone model is available for sale
to the public, it must be tested and certiﬁed
to the FCC that it does not exceed the limit
established by the U.S. government-adopted
requirement for safe exposure. The tests
are performed on position and locations (for
example, worn on the body) as required by FCC
for each model.
While there may be diﬀerences between the
SAR levels of various phones and at various
positions, they all meet the U.S. government
requirement.
The FCC has granted an Equipment
Authorization for this model phone with all
reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR
information on this model phone is on ﬁle with
the FCC and can be found under the Display
Grant section at http://transition.fcc.gov/oet/
ea/fccid/ after search on FCC ID ZNFNSO.
For body worn operation, this phone has
been tested and meets the FCC RF exposure
guidelines. Please use an accessory
designated for this product or an accessory
which contains no metal and which positions
the handset a minimum of 1.5
0 cm from the
body.
In the United States, the SAR limit for
wireless mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. SAR values may
vary depending upon national reporting
requirements and the network band.
Wi-Fi®
Caution
This device is capable of
operating in 802.11a/n mode.
For 802.11a/n devices operating
in the frequency range of 5.15 5.25 GHz, they are restricted for
indoor operations to reduce any
potential harmful interference for
Mobile Satellite Services (MSS) in
the US.
WIFI Access Points that are
capable of allowing your device to
operate in 802.11a/n mode(5.15
- 5.25 GHz band) are optimized for
indoor use only.
If your WIFI network is capable
of operating in this mode, please
restrict your WIFI use indoors to
not violate federal regulations to
protect Mobile Satellite Services.
Appendix/Index
253
FCC Statement for the
USA
This device complies with
part15 of FCC rules. Operation
is subject to the following two
conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Part 15.21 statement
Change or Modiﬁcations that are not expressly
approved by the manufacturer could void the
user's authority to operate the equipment.
Part 15.19 statement
This device complies with part15 of FCC rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
254
Appendix/Index
Part 15.105 statement
This equipment has been tested and found
to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. if this equipment
does cause harmful interference or television
reception, which can be determined by
turning the equipment oﬀ and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on
a circuit diﬀerent from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
European Union Directives
Conformance Statement
Hereby, LG Electronics Inc. declares that this
product is in compliance with:
• The essential requirements and other relevant
provisions of Directive 1999/5/EC
• All other relevant EU Directives
The above gives an example of a typical
Product Approval Number.
Wi-Fi®
(WLAN)
This device is intended for sale in
Japan only.
This equipment may be operated
in all European countries.
The 5150 - 5350 Mhz band is
restricted to indoor use only.
Regulatory information
(FCC ID number, etc.)
For regulatory details, go to "Settings" ▶ "About
tablet" ▶ "Regulatory & Safety" on your tablet.
256
Appendix/Index
Important Safety
Information
AIRCRAFT
Switch oﬀ your wireless device when boarding
an aircraft or whenever you are instructed to do
so by airline staﬀ. If your device oﬀers a 'ﬂight
mode' or similar feature consult airline staﬀ as
to whether it can be used on board.
DRIVING
Full attention should be given to driving at all
times and local laws and regulations restricting
the use of wireless devices while driving must
be observed.
HOSPITALS
Mobile phones should be switched oﬀ wherever
you are requested to do so in hospitals, clinics
or health care facilities. These requests are
designed to prevent possible interference with
sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use
of wireless devices or other radio equipment
in locations with ﬂammable material and
chemicals. Switch oﬀ your wireless device
whenever you are instructed to do so by
authorized staﬀ.
INTERFERENCE
Care must be taken when using the phone in
close proximity to personal medical devices,
such as pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a
minimum separation of 15cm be maintained
between a mobile phone and a pacemaker to
avoid potential interference with the pacemaker.
To achieve this use the phone on the opposite
ear to your pacemaker and do not carry it in a
breast pocket.
Hearing Aids
Some digital wireless phones may interfere
with some hearing aids. In the event of
such interference, you may want to consult
your hearing aid manufacturer to discuss
alternatives.
NOTE :
Excessive sound pressure from
earphones and headphones can cause
hearing loss.
To prevent possible hearing damage,
do not listen at high volume levels for
long periods.
For other Medical Devices:
Please consult your physician and the device
manufacturer to determine if operation of your
phone may interfere with the operation of your
medical device.
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Appendix/Index
257
Export Administration
Regulations
Japan Export Control Regulations ("Foreign
Exchange and Foreign Trade Law" and relevant
laws and regulations) may apply to this product
and its accessories. U.S. Re-export Regulations
(Export Administration Regulations) applies to
this product and its accessories. If you export
or re-export this product or its accessories,
please follow the necessary procedures at
your own risk and expense. For details on the
procedures, contact the Ministry of Economy,
Trade and Industry or the U.S. Department of
Commerce.
258
Appendix/Index
Intellectual Property
Right
Copyrights and Portrait
Rights
You have no right to copy, modify, or distribute
contents such as text, images, music, map
data, or software downloaded from websites
on the Internet, or photos shot by the camera
of this product without permission from the
copyright holder except when the copy or
quote is for personal use that is allowed under
Copyright Law. Note that it may be prohibited
to shoot or record live performances or
exhibitions even for personal use.
Refrain from taking portraits of other people
and uploading such portraits to websites using
this product without their consent, as this
violates portrait rights.
Trademarks
• "Catch Phone (Call waiting service)" is a
registered trademark of Nippon Telegraph and
Telephone Corporation.
• The microSD Logo, microSDHC Logo, and
microSDXC Logos are the trademarks of SD3C, LLC.
• The Bluetooth word mark and logos are
owned by the Bluetooth SIG, INC. and any use
of such marks by XXX, INC. is under license.
Other trademarks and trade names are those
of their respective owners.
• Wi-Fi Certiﬁed® and logos are trademarks or
registered trademarks of Wi-Fi Alliance.
• Microsoft®, Windows®, Windows Vista®, and
Windows Media® are trademarks or registered
trademarks of Microsoft Corporation in the
United States and/or other countries.
• Google and Google logo, Android, Google Play
and Google Play logo, Google Map, Google
Calendar, Google+ and Google+ logo, Gmail
and Gmail logo, YouTube and YouTube logo
are trademarks or registered trademarks of
Google, Inc.
• HDMI (High-Deﬁnition Multimedia Interface) is
trademarks or registered trademarks of HDMI
Licensing LLC.
• Analogix and SlimPort® are trademarks
or registered trademarks of Analogix
Semiconductor, Inc. All other trademarks
and trade names are the property of their
respective owners.
•
is a registered trademark of FeliCa
Networks, Inc.
• FeliCa is a contactless IC card technology
developed by Sony Corporation. FeliCa is a
registered trademark of Sony Corporation.
• iWnn of OMRON SOFTWARE Co., Ltd. is
used for conversion methods for Japanese
language.
iWnn © OMRON SOFTWARE Co., Ltd. 20082015 All Rights Reserved.
Appendix/Index
259
• Disney elements: © Disney
The terminal, accessories and the packages
may contain designs, contents and other
works that Walt Disney Company (Japan)
Ltd., its parent or their aﬃliates (collectively,
"Disney") own, co-own or license copyright
and other intellectual property rights. Please
read the applicable Terms of Use before use.
"Disney Mobile" is the registered trademark of
Disney.
• This terminal contains NetFront
Browser,NetFront Document Viewer and
NetFront Sync Client of ACCESS CO., LTD.
ACCESS, the ACCESS logo, and NetFront
are registered trademarks or trademarks
of ACCESS CO., LTD. in the United States,
Japan and/or other countries.
Copyright © 2015 ACCESS CO., LTD. All
rights reserved.
The module developed by Independent JPEG
Group is included in a part of this terminal.
• Other company names or product names
described in this manual are trademarks or
registered trademarks of those companies.
260
Appendix/Index
Others
• The abbreviations of operating systems
(Japanese versions) below are used in this
manual.
- Windows 8 stands for Microsoft® Windows®
8, Microsoft® Windows® 8 Pro, Microsoft®
Windows® 8 Enterprise.
- Windows 7 stands for Microsoft® Windows®
7 (Starter, Home Basic, Home Premium,
Professional, Enterprise and Ultimate).
- Windows Vista stands for Windows Vista®
(Home Basic, Home Premium, Business,
Enterprise and Ultimate).
• This product is licensed complying with the
MPEG-4 Patent Portfolio License. If you use
it for private purpose without any proﬁts, you
are allowed to use them only when:
- Recording videos that are compliant with
the standard of MPEG-4 Visual (hereinafter
referred to as MPEG-4 Video)
- Playing MPEG-4 Videos recorded personally
by consumers not engaged in proﬁt activities
- Playing MPEG-4 Video supplied from the
provider licensed from MPEG-LA
For details, contact MPEG LA, LLC of the U.S.
•
T-1520095
The Walt Disney Company (Japan) Ltd.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com .
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This oﬀer is valid for three (3) years from the
date on which you purchased the product.
Unlocking SIM
Unlocking SIM is available on this terminal.
Unlocking SIM enables a SIM card from other
makers to be used.
• The service and function may be limited. XXX
shall not be liable for performance.
• For details on unlocking SIM lock, refer to
website.
Insert a SIM card of other
manufacturers
Press the power key for 2 seconds
or longer
• "Network locked" appears on the lock
screen.
When the screen is locked, set a
method to unlock it
Input SIM unlock code in "SIM
network unlock PIN" ﬁeld X
"UNLOCK"
• After "SIM Network unlock successful."
appears, the Home screen will be
displayed in a while.
• After the SIM is unlocked, a SIM of other
manufacturers can be used.
Appendix/Index
261
Using mobile phones with your manners!
Please be considerate of others around you when using this terminal.
Always turn OFF your terminal in the following situations
■ In a place where the use of mobile phones is prohibited
Inside airplane or hospital, follow instructions of the airline company or medical facility. Power oﬀ
this terminal in places banning the use of it.
Set your terminal to Public mode in the following situations
■ While driving
Using this terminal in your hand while driving is subject to punishment.
However, this excludes situations when the use of a mobile phone is unavoidable, such as the
rescue of the sick and injured or the maintenance of public safety.
■ When you are in a public place such as a theater, movie theater, or museum
Using this terminal in a public place, where you need to be quiet, annoys people around you.
Be considerate of where you use your terminal and keep your voice and ringtone down
■ Keep your voice down when using this terminal in a quiet place such as a restaurant and hotel lobby.
■ If you are in an outdoor public place, make sure you do not disturb others.
Respect privacy
■ Please be considerate of the privacy of individuals around you when shooting and sending
photos using camera-equipped mobile phones.
Do not use smartphone while walking
■ Use of smartphone while walking on station platform or road makes your eyesight extremely
narrow. It may cause accident.
■ Stop in a safe place and then use smartphone.
271

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : heeju.an
Create Date                     : 2016:05:02 14:11:51+09:00
Modify Date                     : 2016:05:04 09:36:51-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : Adobe InDesign CS6 (Windows)
Metadata Date                   : 2016:05:04 09:36:51-04:00
Format                          : application/pdf
Title                           : UserGuide_ZNFNSO_20160502.pdf
Creator                         : heeju.an
Document ID                     : uuid:2848136e-a0e3-4430-ba9f-d826cfb4218a
Instance ID                     : uuid:db919ff6-6215-4c2a-aa24-e48137ea24a2
Page Count                      : 257

EXIF Metadata provided by EXIF.tools

LG Electronics USA NSO Tablet with WLAN and Bluetooth User Manual UserGuide ZNFNSO 20160502

LG Electronics MobileComm USA, Inc. Tablet with WLAN and Bluetooth UserGuide ZNFNSO 20160502

Users Manual

FCC ID Filing: ZNFNSO

Navigation menu

Namespaces

Views

Navigation