LG Electronics USA NSPDP5009 PLASMA TV/MONITOR User Manual 2 of 2
LG Electronics USA PLASMA TV/MONITOR 2 of 2
Contents
- 1. User manual 1 of 2
- 2. User manual 2 of 2
User manual 2 of 2
Insignia NS-PDP42/50-09 42" and 50" Plasma TV Note to reviewers: The source document left out step 3 (above). Does the user need to select the Picture Mode before selecting Advanced Control? 4 Press or to select Advanced Control. The Advanced Control sub-menu opens. 5 Press or to select Color Temperature, then press or to cycle through the various presets. Selections include Cool, Medium, and Warm. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. To manually adjust the picture settings using Expert control: 1 Press MENU on the remote control, then press or or or to select PICTURE. The PICTURE menu opens. 2 Press ENTER to enter the PICTURE menu. 3 Press or to select Picture Mode, then press ENTER. 4 Press or to select Expert1 or Expert2, then press ENTER. The Expert Control sub-menu opens. Manually adjusting the picture settings To manually adjust the picture settings: 1 Press MENU on the remote control, then press or or or to select PICTURE. The PICTURE menu opens. 2 Press ENTER to enter the PICTURE menu. 3 Press or to select Picture Mode, then press ENTER. 4 Press or to select Vivid, Standard, Cinema, Sport, or Game, then press ENTER. 5 Press or to select Contrast, Brightness, Sharpness, Color, or Tint, then press ENTER. 6 Press or to adjust the selected picture setting. 7 Repeat Steps 5 and 6 to adjust the other picture settings, as needed. 8 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Reviewers: Please verify the above procedure. 22 5 Press or to select Expert Control, then press ENTER. 6 Press or to select the picture setting to adjust, then press ENTER. 7 Press or to adjust the selected picture setting. 8 Repeat Steps 6 and 7 to adjust the other picture settings, as needed. 9 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Reviewers: Please verify the above procedure. www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV Adjusting the picture settings with Advanced Control To manually adjust the picture settings using Advanced Control: 1 Press MENU on the remote control, then press or or or to select PICTURE. The PICTURE menu opens. 2 Press ENTER to enter the PICTURE menu. 3 Press or to select Picture Mode, then press ENTER. Note to reviewers: The source document left out step 3 (above). Does the user need to select the Picture Mode before selecting Advanced Control? 4 Press or to select Advanced Control, then press ENTER. The Advanced Control sub-menu opens. 8 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Reviewers: Please verify the above procedure. Resetting your TV to factory default picture settings To reset your TV to factory settings: 1 Press MENU on the remote control, then press or or or to select PICTURE. The PICTURE menu opens. 2 Press ENTER to enter the PICTURE menu. 3 Press or to select Picture Mode, then press ENTER. Note to reviewers: The source document left out step 3 (above). Does the user need to select the Picture Mode before selecting Advanced Control? 4 Press or to select Reset, then press ENTER. Your TV resets all picture settings to factory default. 5 Press MENU to return to normal viewing. Preventing ghost images on your TV 5 Press or to select an advanced control picture setting. Choices include: • Fresh Contrast—Optimizes the contrast automatically, based on the brightness of the reflection. • Fresh Color—Adjusts the color of the reflection automatically to produce natural colors. • Noise Reduction—Removes interference so that it does not damage the original picture. • Gamma—High gamma values display whitish images and low gamma values display high-contrast images. • Black Level—Settings include Low, High, or Auto. Not available in DTV and RGB-PC modes. • Film Mode—Choose On or Off. Best for viewing movies. The TV adjusts the 24 fps video from movies to 30 fps video for display. Only available in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i modes. 6 Press or to adjust the selected advanced control picture setting. 7 Repeat Steps 5 and 6 to adjust the other advanced control picture settings, as needed. A still picture from a PC video game displayed on the screen for prolonged periods can result in a ghost image on your TV screen. You can use the Orbiter setting to help prevent these ghost images. The other two functions are for removing ghost images. To prevent or remove ghost images: 1 Press MENU on the remote control, then press or or or to select OPTION. The OPTION menu opens. 2 Press ENTER to enter the OPTION menu. www.insignia-products.com 23 Insignia NS-PDP42/50-09 42" and 50" Plasma TV 3 Press or to select ISM Method, then press ENTER. The ISM Method sub-menu opens. 4 Press or to select the ISM method you want to use. Choices include: • Normal—If image sticking is never a problem, ISM is not necessary. Set to Normal. • Orbiter—Orbiter may help prevent ghost images by moving the image every two minutes. However, we recommend that you do not allow any fixed image to remain on the screen for an extended period of time. • Inversion—Inversion automatically inverts the plasma display color image every 30 minutes. • White Wash—White Wash removes ghost images from the screen. Use sparingly. Watch TV normally for a while before using this feature to see if the ghost image disappears on its own. A bad ghost image may be impossible to clear entirely with White Wash. 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Reducing your TV’s power consumption To save power: 1 Press MENU on the remote control, then press or or or to select OPTION. The OPTION menu opens. 4 Press or to select the power saving setting you want. Settings include Level 0 (the brightest), Level 1, Level 2, Level 3, and Level 4 (the least bright). 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Note You can also change the Power Saving settings by using the Q.MENU. Controlling the sound and language Setting the automatic volume leveler Auto Volume ensures that the volume level remains consistent, whether you are watching a commercial or a regular TV program. To set the automatic volume leveler: 1 Press MENU on the remote control, then press or or or to select AUDIO. The AUDIO menu opens. 2 Press ENTER to enter the AUDIO menu. 3 Press or to select Auto Volume, then press ENTER. 4 Press or to select On or Off. 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Improving voice clarity By differentiating the human sound range from others, Clear Voice improves the sound quality of voices. To set Clear Voice: 1 Press MENU on the remote control, then press or or or to select AUDIO. The AUDIO menu opens. 2 Press ENTER to enter the OPTION menu. 3 Press or to select Power Saving, then press ENTER. The Power Saving sub-menu opens. 2 Press ENTER to enter the AUDIO menu. 3 Press or to select Clear Voice, then press ENTER. 4 Press or to select On or Off. 24 www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Notes • Clear Voice disables the SRS TruSurround XT feature. • You can also set Clear Voice in the Q.MENU. 4 Press or to select Standard, Music, Cinema, Sport, or Game, then press ENTER. 5 Press or to select Treble, Bass, SRS TruSurround XT, or Reset, then press ENTER. Note If you select Reset, press ENTER to reset audio settings to the factory default. Selecting preset sound settings To directly select the preset sound settings: 1 Press SOUND on the remote control repeatedly to cycle through the various presets. Choices include Standard, Music, Cinema, Sport, or Game. 2 When you have made your selection, press RETURN to resume normal viewing. To select the preset sound setting from the Q.MENU: 1 Press Q.MENU on the remote control. The Q.MENU opens. 6 Press or to adjust the selected setting (Treble or Bass), then turn SRS TruSurround XT On or Off. Note SRS TruSurround XT takes advantage of any multi-channel format without adding extra speakers or equipment. Dialog clarity, bass enrichment, and stereo audio enhancement produces an immersive sound experience from standard stereo material. 7 Repeat Steps 5 and 6 to adjust the other audio settings, as needed. 8 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Adjusting the sound balance To adjust the sound balance: 1 Press MENU on the remote control, then press or or or to select AUDIO. The AUDIO menu opens. 2 Press or to select Sound Mode, then press or to cycle through the various presets. Choices include Standard, Music, Cinema, Sport, or Game. 3 Press or to select Close, then press ENTER to return to normal viewing. Adjusting the audio settings individually To individually adjust the audio settings: 1 Press MENU on the remote control, then press or or or to select AUDIO. The AUDIO menu opens. 2 Press ENTER to enter the AUDIO menu. 3 Press or to select Balance, then press ENTER. 4 Press or to adjust the sound balance (left/right to suit your preference and your location). 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. 2 Press ENTER to enter the AUDIO menu. 3 Press or to select Sound Mode, then press ENTER. www.insignia-products.com 25 Insignia NS-PDP42/50-09 42" and 50" Plasma TV Turning your TV speakers on or off Selecting the audio and menu languages To turn you TV speakers on or off: 1 Press MENU on the remote control, then press or or or to select AUDIO. The AUDIO menu opens. 2 Press ENTER to enter the AUDIO menu. 3 Press or to select TV Speaker, then press ENTER. 4 Press or to select On or Off. 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Selecting your audio source programming This TV can receive MTS stereo programs and any SAP (secondary audio program) that accompanies the stereo program if the station transmits an additional sound signal (analog TV only). Mono sound is automatically used if the broadcast is only in mono. For digital broadcasts, you can select a variety of audio languages (if available). To select your audio source programming from the Q.MENU: 1 Press Q.MENU on the remote control. The Q.MENU opens. To select the audio and menu languages: 1 Press MENU on the remote control, then press or or or to select OPTION. The OPTION menu opens. 2 Press ENTER to enter the OPTION menu. 3 Press or to select Language, then press ENTER. 4 Press or to select Audio, then press or to select the language you want. Selections include English, Spanish, or French. - OR Press or to select Menu, then press or to select the language you want. Selections include English, Spanish, or French. Note As soon as you select the menu language, the on-screen menus are shown in the selected language. 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Setting up Closed Captioning 2 Press or to select SAP, then press or to cycle through the presets. Choices include Mono, Stereo, or SAP (analog TV only). - ORPress or to select Multi Audio, then press or to cycle through the various languages available (digital TV only). 3 Press or to select Close, then press ENTER to return to normal viewing. 26 Closed captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information (if available). Caption text, if provided by the broadcaster, is available for both digital and analog channels on the antenna/cable. This TV is programmed to memorize the caption or text mode which was last set when you turned the power off. This function is only available when Caption Mode is set to On. For digital broadcasts, you can also choose the language for the captions, if multiple language captions are included in the program. This is also only available when Caption Mode is set to On. www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV To set up Closed Captioning (analog TV): 1 Press MENU on the remote control, then press or or or to select OPTION. The OPTION menu opens. 2 Press ENTER to enter the OPTION menu. 3 Press or to select Caption, then press ENTER. 4 Press or to select On. 5 Press , then press or to select the caption mode you want. Selections include CC1 ~ CC4 and Text1 ~ Text4. Note • • Captions scroll across the bottom of the screen and show the audio portion of the program. Text appears in a large black frame that can cover a portion of the screen and show messages provided by the broadcaster. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. To set up digital options with Closed Captioning (digital TV): 1 Press MENU on the remote control, then press or or or to select OPTION. The OPTION menu opens. 2 Press ENTER to enter the OPTION menu. 3 Press or to select Caption, then press ENTER. 4 Press or to select On, then press or to select Digital Option, then press ENTER. 5 Press or to select Custom. The Custom menu opens. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. To set up Closed Captioning (digital TV): 1 Press MENU on the remote control, then press or or or to select OPTION. The OPTION menu opens. 2 Press ENTER to enter the OPTION menu. 3 Press or to select Caption, then press ENTER. 4 Press or to select On. 5 Press , then press or to select the caption mode you want. Selections include CC1 ~ CC4, Text1 ~ Text4, or Service1 ~ Service6. Note • • Captions scroll across the bottom of the screen and show the audio portion of the program. Text appears in a large black frame that can cover a portion of the screen and show messages provided by the broadcaster. 6 Press or to select the option and or to make adjustments to those options. Options include: • Size—Set the word size. • Font—Select a typeface for the text. • Text Color—Choose a color for the text. • Text Opacity—Specify the opacity of the text color. • Bg Color—Select a background color. • Bg Opacity—Select the opacity for the background color. 7 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Setting the clock Setting the clock automatically When you choose this option, the time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. www.insignia-products.com 27 Insignia NS-PDP42/50-09 42" and 50" Plasma TV To set the clock automatically: 1 Press MENU on the remote control, then press or or or to select TIME. The TIME menu opens. 3 Press or to select Clock, then press ENTER. The Clock sub-menu opens. 2 Press ENTER to enter the TIME menu. 3 Press or to select Clock, then press ENTER. The Clock sub-menu opens. 4 Press or to select Manual. 5 Press or to select the setting to change, then press or to change the setting. 6 Repeat Step 5 to change additional settings. 7 Press or to select On, Off, or Auto. 8 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Setting the auto on/off timer 4 Press or to select Auto, then press to select Time Zone. 5 Press or to select your time zone, then press to select Daylight Saving. 6 Press or to select On, Off, or Auto. 7 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Notes • This feature operates only if the current time has been set. • The Off Time feature overrides the On Time function if they are both set to the same time. • The TV must be in standby mode for the On Time to work. • If you do not press any button within two hours after the TV turns on with the On Time function, the TV automatically reverts to standby mode. To set the auto on/off timer: 1 Press MENU on the remote control, then press or or or to select TIME. The TIME menu opens. To set the clock manually: 1 Press MENU on the remote control, then press or or or to select TIME. The TIME menu opens. 2 Press ENTER to enter the TIME menu. 2 Press ENTER to enter the TIME menu. 28 www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV 3 Press or to select Off Time or On Time, then press ENTER. The Auto On/Off sub-menu opens. Setting the auto shut-off feature This feature automatically turns the TV off if it receives no signal for 10 minutes. To set the auto shut-off feature: 1 Press MENU on the remote control, then press or or or to select TIME. The TIME menu opens. 4 Press or to select Repeat, then press or to select Off, Once, Everyday, Mon~Fri, Mon~Sat, Weekend, or Sunday. 5 Press or to select Hour or Minute, then press or to change the setting. If you selected On Time, you can also change the settings for Input and Volume. If you selected TV for Input, you can also set the channel to view when the TV turns on. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Setting the sleep timer To directly set the sleep timer: 1 Press SLEEP on the remote control repeatedly to cycle through the various times. Choices include Off, 10, 20, 30, 60, 90, 120, 180, and 240. 2 When you have made your selection, press RETURN to resume normal viewing. To set the sleep timer from the Q.MENU: 1 Press Q.MENU on the remote control. The Q.MENU opens. 2 Press ENTER to enter the TIME menu. 3 Press or to select Auto Sleep, then press ENTER. 4 Press or to select On or Off. 5 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Setting locks and parental controls The Parental Control feature (V-Chip) of this TV can be used to block specific channels, ratings, and other viewing sources. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of program and the categories to be blocked. It is also possible to block all program viewing for a period of time. To use this function, you must do the following: 1 Set ratings and categories to be blocked. 2 Specify a password 3 Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV rating or Individual Categories. Movies that have been shown in theaters or direct-to-video movies use the movie rating system (MPAA) only. TV parental guidelines ratings 2 Press or to select Sleep Timer, then press or to cycle through the various times. Choices include Off, 10, 20, 30, 60, 90, 120, 180, and 240. 3 Press or to select Close, then press ENTER to return to normal viewing. Rating Description TV-Y All children TV-Y7 Children over seven years of age TV-G General audiences TV-PG Parental guidance suggested TV-14 Parents strongly cautioned TV-MA Mature audiences only www.insignia-products.com 29 Insignia NS-PDP42/50-09 42" and 50" Plasma TV Some of the age-based TV parental guidelines ratings also have content-based ratings. Rating Description FV Fantasy violence Adult language Sexual situations Violence Sexually suggestive dialog Setting the password and locks Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. To enter the password: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. USA Menu US MPAA ratings Rating Description General audiences PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parental guidance strongly suggested. Some material may not be suitable for children under 13 years of age. Restricted. Not suitable for children under 17 years of age unless accompanied by a parent or guardian. NC-17 Not suitable for children under 17 years of age. Adults only N/A Not rated Canada Menu Canadian English ratings Rating Description Children C8+ Children 8 years and above General audience PG Parental guidance suggested 14+ 14 years old and above 18+ Adult programming Exempt - Not rated Canadian French ratings Rating Description Children 8ans+ Children 8 years and above 13ans+ Children 13 years and above 16ans+ Children 16 years and above 18ans+ Adult programming EXEMPT Not rated 2 Press ENTER. The Enter Password dialog box opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). To change the password: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. 2 Press ENTER. The Enter Password dialog box opens. 30 www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select Set Password, then press ENTER. The Set Password dialog box opens. 5 Press the number buttons (9~0) to enter the new password, then enter it again to confirm. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Setting up blocks based on movie (MPAA) ratings Use this feature to block movies according to the movie ratings limit specified, so children cannot view certain movies. You can set the ratings limit by blocking all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. To set up blocks for movies: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. Setting up channel block Use this feature to block channels that you do not want to watch or that you do not want your children to watch. To set channel blocking: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. 2 Press ENTER. The Enter Password dialog box opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select Movie Rating, then press ENTER. The Movie Rating sub-menu opens. 2 Press ENTER. The Enter Password dialog box opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select Block Channel, then press ENTER. The Block Channel menu opens. 5 Press or to select the movie rating to block or unblock. Choices include G, PG, PG-13, R, NC-17, X, or Blocking Off. See “US MPAA ratings” on page 30 for an explanation of the ratings. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. 5 Press or or or to select the channel to block or unblock. Repeat for each channel you want to block or unblock. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. www.insignia-products.com 31 Insignia NS-PDP42/50-09 42" and 50" Plasma TV Setting up blocks for children’s programs based on TV ratings Use this feature to prevent children from watching certain TV children’s programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating sub-menu, your children can view those programs. Setting up blocks based on TV ratings (USA only) Use this feature to block certain TV programs that you and your family do not want to view, based on their ratings. To set up blocks for TV programs: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. To set up blocks for children’s TV programs: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. 2 Press ENTER. The Enter Password dialog box opens. 2 Press ENTER. The Enter Password dialog box opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select TV Rating-General, then press ENTER. The TV Rating-General sub-menu opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select TV Rating-Children, then press ENTER. The TV Rating-Children sub-menu opens. 5 Press or to select the rating to block or unblock, then press ENTER. Choices include Age (TV-Y and TV-Y7) and Fantasy Violence (TV-Y7). 6 Press or to select block options. 7 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. 32 5 Press or to select the rating to block or unblock, then press ENTER. Choices include: • Age (applies to TV-G, TV-PG, TV-14, and TV-MA) • Dialog (applies to TV-PG and TV-14) • Language (applies to TV-PG, TV-14, and TV-MA) • Sex (applies to TV-G, TV-14, and TV-MA) • Violence (applies to TV-PG, TV-14, and TV-MA). 6 Press or to select block options. 7 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV Setting up blocks based on TV ratings (Canada English only) Setting up blocks based on TV ratings (Canada French only) Use this feature to block certain Canadian English TV programs that you and your family do not want to view, based on their ratings. Use this feature to block certain Canadian French TV programs that you and your family do not want to view, based on their ratings. To set up blocks for TV programs: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. To set up blocks for TV programs: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. 2 Press ENTER. The Enter Password dialog box opens. 2 Press ENTER. The Enter Password dialog box opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select TV Rating-English, then press ENTER. The TV Rating-English sub-menu opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select TV Rating-French, then press ENTER. The TV Rating-French sub-menu opens. 5 Press or to select the rating to block or unblock, then press ENTER. Choices include E, C, C8+, G, PG, 14+, 18+, and Blocking Off. See “Canadian English ratings” on page 30 for an explanation of the ratings. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. 5 Press or to select the rating to block or unblock, then press ENTER. Choices include E, G, 8ans+, 13ans+, 16ans+, 18ans+, and Blocking Off. See “Canadian French ratings” on page 30 for an explanation of the ratings. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. www.insignia-products.com 33 Insignia NS-PDP42/50-09 42" and 50" Plasma TV Setting up blocks based on downloadable ratings This function may become available in the future and will be available only for digital channels. This function operates only when the TV has received Region 5 Rating data. Setting up blocks for specific input sources To set up blocks for specific input sources: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. To set up blocks for downloadable ratings: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. 2 Press ENTER. The Enter Password dialog box opens. 2 Press ENTER. The Enter Password dialog box opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select Downloadable Rating, then press ENTER. The TV Downloadable Rating sub-menu opens. 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select Input Block, then press ENTER. The Input Block sub-menu opens. Note The downloadable rating table may differ from the one shown in the illustration. Note The downloadable rating table may differ from the one shown in the illustration. 5 Press or to select the rating to block or unblock, then press ENTER. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. 34 5 Press or to select an input source to block or unblock, then press ENTER. 6 Press or to select On or Off for the selected source. Repeat for additional sources. 7 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV Cleaning the cabinet Enabling the lock system This enables or disables the blocking scheme you set up. To set up the lock system: 1 Press MENU on the remote control, then press or or or to select LOCK. The LOCK menu opens. Wipe the front panel and other exterior surfaces of your TV with a soft, dry, lint-free cloth. Never use a solvent or alcohol to clean your TV. Do not spray insecticide near your TV. Such chemicals may cause damage and discoloration to the exposed surfaces. Troubleshooting Operation Problem 2 Press ENTER. The Enter Password dialog box opens. Remote control does not work • Remove obstacles between the remote control and the player. • Point the remote control at your TV’s IR sensor. Install fresh batteries. Power turns off suddenly • Make sure that the sleep timer is not set. • Check the power control settings. Video problems Problem 3 Press the number buttons (9~0) to enter the password (the initial password is “0000”). 4 Press or to select Lock System, then press ENTER. The Lock System sub-menu opens. • Check all cable connections. • Make sure that your TV is turned on. • Try another channel. It may be a broadcast problem. • Check your antenna connection, location, or direction. • Make sure that the power connection is okay. Check the wall power outlet. Picture appears slowly when your TV is turned on • It is normal for the image to be muted during the startup process. If the picture does not appear after five minutes, call your Insignia service center. Picture is satisfactory, but no sound • Check the volume level and mute setting. No color, poor color, or poor picture • Check the picture control and adjust color. • Make sure you have provided a sufficient distance between the TV and VCR. • Try another channel. The problem may be the broadcast. • Make sure the video cables are connected correctly. • Check the power saving feature and restore the brightness of your TV. • Check the program's color features. The problem may be that it is a black and white movie. Poor reception on some channels • Check the antenna and its connection. If there are problems, correct them. If all connections are tight, the problem may be with a faulty antenna or cable. • The station or your cable TV provider may be experiencing problems. • Check for sources of interference. • Re-orient your antenna for better reception. Stripes or bars on picture • Check for interference from other electronic devices, such as radios and televisions, and keep magnetic or electronic devices away from your TV. • Check your antenna connection, location, or direction. Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution Make sure that you turn the power off and unplug the power cord before you begin any cleaning. Solution No picture or sound 5 Press or to select On or Off. 6 Press RETURN to return to the previous menu, or press MENU to return to normal viewing. Maintaining your TV Solution Cleaning the screen Wet a soft cloth in a mixture of luke warm water and a little fabric softener or dishwashing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air dry before you turn on your TV. www.insignia-products.com 35 Insignia NS-PDP42/50-09 42" and 50" Plasma TV Specifications Audio problems Problem Picture okay, but no sound Solution • Press the volume control to increase the volume. • Press MUTE to make sure that your TV is not muted. • Try another channel. The problem may be with the broadcast. • Make sure that the audio cables are installed correctly. No output from one of the speakers • Adjust the balance in the AUDIO menu. Unusual sound from inside the TV • A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off. This does not indicate a fault with the product. No color, poor color, or poor picture Poor reception on some channels Stripes or bars on picture • Check the picture control and adjust color. • Make sure you have provided a sufficient distance between the TV and VCR. • Try another channel. The problem may be the broadcast. • Make sure the video cables are connected correctly. • Check the power saving feature and restore the brightness of your TV. • Check the program’s color features because it may be a black and white movie. • Check the antenna and its connection. If there are problems, correct them. If all connections are tight, the problem may be with a faulty antenna or cable. • The station or your cable TV provider may be experiencing problems. • Check for sources of interference. • Reorient your antenna for better reception. • Check for interference from other electronic devices, such as radios and televisions, and keep magnetic or electronic devices away from your TV. • Check your antenna connection, location, or direction. PC mode problems Problem Solution The signal is out of range • Adjust the resolution, horizontal frequency, or vertical frequency. • Check the input source. Vertical bar or stripe on the background, horizontal noise, or incorrect position • Adjust the clock, phase, or horizontal/vertical position, or try Auto to configure these options. The screen color is unstable or a single color • Check the signal cable to make sure that it is connected correctly. • Reinstall your PC’s video card. 36 Dimensions NS-PDP42-09 With stand 40.9 × 28.7 × 12.1 inches (1040 × 729 × 3080 mm) Without stand 40.9 × 26.6 × 3.2 inches (1040 × 677 × 83.6 mm) With stand 48.2 × 33.4 × 14.3 inches (1224.7 × 849 × 364 mm) Without stand 48.2 × 31.1 × 3.2 inches (1224.7 × 790 × 83.6 mm) Weight NS-PDP42-09 With stand Without stand 57.3 lbs. (26 kg) 52.9 lbs. (24 kg) Weight NS-PDP50-09 With stand Without stand 91.4 lbs. (41.5 kg) 83.9 lbs. (38.1 kg) Power requirement TV system NS-PDP42-09 AC100-120V ~ 50/60 Hz NS-PDP50-09 AC100-240V ~ 50/60 Hz NTSC-M, ATSC 64 and 256 QAM Program coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1.135 External antenna impedance 75 ohms Environment Operating temp. 32~104°F (0~40°C) Operating humidity Less than 80% Dimensions NS-PDP50-09 Storage temp. -4~140°F (-20~60°C) Storage humidity Less than 85% Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced technician for help. www.insignia-products.com Insignia NS-PDP42/50-09 42" and 50" Plasma TV One-year limited warranty Insignia Products (“Insignia”) warrants to you, the original purchaser of this new NS-42/50PDP-09 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement. This warranty does not cover refurbished Product. If you notify Insignia during the Warranty Period of a defect covered by this warranty that requires service, terms of this warranty apply. How long does the coverage last? The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. The purchase date is printed on the receipt you received with the Product. What does this warranty cover? During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product. How to obtain warranty service? If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. To obtain in-home warranty service for a television with a screen 25 inches or larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have an Insignia-approved repair person dispatched to your home. • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Insignia to service the Product • Products sold as is or with all faults • Consumables, such as fuses or batteries • Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. Contact Insignia: For customer service please call 1-877-467-4289 www.insignia-products.com Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645 © 2008 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. Where is the warranty valid? This warranty is valid only to the original purchaser of the product in the United States and Canada. What does the warranty not cover? This warranty does not cover: • Customer instruction • Installation • Set up adjustments • Cosmetic damage • Damage due to acts of God, such as lightning strikes • Accident • Misuse • Abuse • Negligence • Commercial use • Modification of any part of the Product, including the antenna • Plasma display panel damaged by static (non-moving) images applied for lengthy periods (burn-in). This warranty also does not cover: • Damage due to incorrect operation or maintenance www.insignia-products.com 37 WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product TM www.insignia-products.com (877) 467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 © 2008 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a registered trademark of Best Buy Enterprise Services, Inc. All other products and brand names are trademarks of their respective owners. Distribuido por Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 © 2008 Best Buy Enterprise Services, Inc. Todos los derechos reservados. INSIGNIA es una marca registrada de Best Buy Enterprise Services, Inc. Todos los demás productos y marcas son marcas comerciales de sus respectivos dueños. 08-1050
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 18 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6d066887-9aa4-40c9-8c84-318cf8df89f0 Modify Date : 2008:02:15 10:38:30+09:00 Create Date : 2008:02:15 09:43:08+09:00 Metadata Date : 2008:02:15 10:38:30+09:00 Document ID : uuid:27625faf-650a-4c7c-9771-9b19c1193d4e Format : application/pdf Producer : Creo Normalizer JTPEXIF Metadata provided by EXIF.tools