LG Electronics USA NT-14Z970 Notebook Computer User Manual TempConfidential 2
LG Electronics USA Notebook Computer TempConfidential 2
Contents
- 1. TempConfidential_User Manual-1
- 2. TempConfidential_User Manual-2
TempConfidential_User Manual-2
Using the PC 91 Wired LAN Using Wired LAN Wired LAN is installed with an automatic IP (DHCP) as default value. Please refer to the following instructions for details on setting up an automatic IP (DHCP) or manual IP. 1 Connect the LAN adapter to the USB Type-C™ port on the PC. TIP The recommended network cable for the optimal network environment is CAT5 or higher. The network (LAN) cable may be connected when the LAN adapter is used. The LAN adapter may be separately purchased at LG Service Center. ENGLISH LAN is the network environment that users can connect to by using a cable to connect to their internet providers or the company's network. 92 Using the PC 2 Connect the wired LAN cable to the LAN port. ENGLISH Using the PC 3 Press the [ ] button and select the Settings menu. ] key or [Ctrl] + [Esc] to display the Start menu. ENGLISH TIP Press the [ 93 94 Using the PC 4 Select [Network & Internet] > [Status] > [Change adapter options]. ENGLISH Using the PC 95 5 Right-click [Ethernet] and select the [Properties] menu. ENGLISH 96 Using the PC 6 Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. ENGLISH Using the PC 97 7 To use an automatic IP(DHCP), select [Obtain an IP address automatically]. If you wish to use a 8 Press [OK] to complete the network setup. 9 Click the Internet Browser icon to check whether the internet is operating normally. ENGLISH static IP, select [Use following IP address] to enter the address. Contact the network service provider or administrator to use a static IP. 98 Using the PC Wireless LAN ENGLISH The wireless network (Wireless LAN) is the network environment that connects a PC with the internet provider or company network through an Access Point (wireless or regular router). OPTION Wireless LAN is optional. Hence, it may not be installed in some models. Turning On/Off Airplane Mode Prior to using the wireless LAN, press [Fn] + [F6] to turn off Airplane mode. Pressing [Fn] + [F6] keys will turn on or off the Airplane mode. If you are not going to use the product for a while, keep the Airplane mode turned on to reduce the battery power consumption. Using the Wireless LAN If an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless LAN can easily be accessed. During the search for a wireless network (Wireless LAN), various Access Point may be found according to the location where the PC is used. In case no accessible wireless network (Wireless LAN) is near the PC, no Access Point might be found. A password protected Access Point cannot be accessed without the correct password. Using the PC 1 Press the Action Center [ 99 ] icon on the right side of the taskbar. ENGLISH 100 Using the PC 2 Press the [Network] tile to search for a nearby Access Point. ENGLISH TIP If Wi-Fi is turned off, press the [Wi-Fi] tile. Using the PC 101 ENGLISH 3 Select the Access Point you want to connect to and press [Connect]. 102 Using the PC 4 If a connection is established, [Connected] appears below the Access Point name. ENGLISH 5 click the Internet Browser icon to check whether the internet is operating normally. Using the PC 103 Using a Wired/Wireless Router A wireless / regular router has to be bought separately. Refer to the manual provided by the manufacturer for instructions. Connecting a Wireless or Regular Router If one internet line is used with a wired / wireless router and several devices are connected, this may result in a slower connection. In case of a wireless LAN, it is recommended to change the network name and security settings for a more secure connection. Network speed can differ according to operation environment and specifications. 1 Connect the internet cable of the modem that was provided by your internet provider to the router's WAN port. 2 Connect all devices (PC, IPTV, internet phone, etc.) with a LAN cable to LAN ports 1 to 4 of the router. The number of LAN ports can vary for each router model. 3 Please refer to the manual provided by the router manufacturer for setup of the network and internet. ENGLISH A wireless / regular router connects several PCs and mobile devices to one internet line and enables the use of internet and the network. 104 Using the PC Micro SD Slot ENGLISH Checking Available Memory Card This model supports Micro SD memory cards. • Directly applicable memory cards Mounting and Using Memory Card This product supports one Micro SD slot. Check the direction and insert the Micro SD into the multi-card slot until it is locked in place as shown in the following figure. Using the PC 105 ENGLISH TIP • When the memory card is formatted, the data stored in the memory card will be deleted. Check whether there are important data before formatting the memory stick. • To format a memory card, right-click the memory card drive and select Format. When the Format window appears, press Start to continue. • If the write protection tab of memory card is locked, the user cannot format the memory stick nor write or delete the data. • SD™, MMC™ memory cards can be used only as storage devices and do not support the copyright protection feature. Removing Memory Card Push the card with your finger to make the card spring out of the slot. Remove the memory card. 106 Using the PC TIP To safely remove a memory card: ENGLISH The figures herein may differ by language selection and are subject to change without prior notice. 1 Click Safely Remove Hardware and other Media icon on the right side of the taskbar. 2 Select Remove Multi-Card USB Device to safely remove hardware. Using Software 107 Using Software LG Control Center is a software that helps you to change PC Settings, Power Settings, Windows Security Settings, etc. as well as viewing system information. TIP The figures herein are subject to change without prior notice. The menus displayed in LG Control Center and its supported functions may differ depending on the model. Running LG Control Center Select the [ ] button > [LG Software] to run [LG Control Center]. 1 Minimize/Exit Button: Minimizes the size of the window, or exits the software. 2 help/info: Runs Help or displays information about the software. ENGLISH LG Control Center 108 Using Software 3 System Settings: Sets up the screen brightness / resolution, external display, sound and other various devices. ENGLISH 4 Power Management: Sets up USB charging, battery status and battery life extension. 5 Windows Security: Sets User Account Control settings and Firewall settings. 6 Instant Booting: You can set the system to automatically boot whenever you open the notebook PC. 7 System Information: Displays the PC OS in use, processor information and other system information. System Settings Screen You can use this screen to configure various devices in your PC. Using Software 109 1 Screen: Allows you to set the brightness and resolution of the screen. (This function is not supported in a model that does not provide the brightness settings in Windows.) to the PC. 3 Keyboard Backlight: Allows you to configure the Keyboard backlight. 4 Hot Key Settings: Allows you to set the hot keys so that you can use them without pressing the Fn key. Sound: Allows you to adjust the volume of the sound or use the mute function. Airplane Mode: Allows you to set the Airplane Mode. (It turns off the wireless LAN). Silent Mode: Allows you to set the fan to the low-speed mode. Touchpad: Allows you to set whether to use the touchpad. (If you select Automatic, the touchpad is automatically set to "Do Not Use" when you connect a mouse to your PC.) 9 Touch Screen: Allows you to set whether to use the touch screen. Power Management Screen: You can check or change the settings related to USB charging or battery. 1 USB Charge Setting: Allows you to set the USB port so that you can perform charging using the USB port even when the PC is turned off. 2 Battery State: Allows you to measure the battery lifespan so that you can replace it timely. ENGLISH 2 External Display: Allows you to configure the connection mode of an external display connected 110 Using Software 3 Extend Battery Life: Allows you to increase the battery lifespan by lowering the battery charging level to 80% of the battery capacity. ENGLISH Windows Security Screen You can change the User Account Control and firewall settings in Windows. 1 User Account Control Settings: Allows you to change the User Account Control settings in Windows. 2 Firewall: Turns on/off the Windows firewall. (It may not work if other vaccine software is installed in the PC.) Instant Booting You can set the system to automatically boot whenever you open the notebook PC. Using Software 111 ENGLISH FAQ Q: Battery status displays “Warning”. • The battery is a consumable item and its lifespan may decrease depending on the usage frequency and environment. It is recommended that you visit the LG Electronics service center to have the battery replaced. 112 Using Software LG Update Center ENGLISH LG Update Center allows you to install various PC drivers, applications and Windows patches easily. TIP It may not work properly depending on user preferences (security tools, etc.) and the network status. You can use the LG Update Center to quickly install the latest drivers, or reinstall any deleted drivers. Use LG Update Center to keep your system current and optimized. The figures herein are subject to change without prior notice. Running LG Update Center Select the [ ] button > [LG Software] to run [LG Update Center]. 1 Minimize/Exit Button: Minimizes the size of the window, or exits the software. 2 help/info: Runs Help or displays information about the software. 3 Required Update: Installs critical items that must be applied to the system. Using Software Required Update You can install essential updates and drivers that are necessary for the system. 1 Select the [Required Update] menu. ENGLISH 4 All List: Displays and installs all required items for the system. 5 Notification Setting: Sets up notifications for online updates for installed items. 113 114 Using Software 2 When the Required Update list appears, select the updates to install and press the [Installation] button. ENGLISH TIP All items are selected by default. All List You can install all updates and drivers that can be installed in the system. Using Software 115 1 Select the [All List] menu. ENGLISH 116 Using Software 2 When the list appears, select the updates to install and press the [Installation] button. ENGLISH TIP All items are selected by default. Notification Settings You can check the critical updates to set whether to display the notifications for update installation. TIP The Auto Update Search function is set to [ON] by default. If you set it to [OFF], the notifications are not displayed. Using Software 117 1 Select the [Notification Setting] menu. ENGLISH 2 Set [Auto Update Search] to [ON] or [OFF]. 118 Using Software 3 Set the [Notification Frequency]. ENGLISH 4 Select [Notification List Setup] menu to turn on/off the notification for each item. FAQ Q: Is there a way that I can install the drivers and applications easily? • You can select [Required Update] or [All List] menu in LG Update Center to automatically install the drivers and applications that you want. Q: The server connection status is not displayed in the program. • Check if your PC is properly connected to the wired or wireless LAN. • Check if Internet connection works properly. Q: I want to hide the update notifications. • Select the [Notification Settings] menu and set the [Auto Update Search] to [OFF]. • Select [Notification List Settings] menu to turn on/off the notification for each item. Q: How can I update the items that are excluded from the notification list? • You can also install the items that are excluded from the notification list by using the [Required Update] or [All Lists] menu. Using Software 119 LG Power Manager TIP If LG Power Manager is not installed, visit LG Update Center to have it installed. The menus displayed in LG Power Manager and its supported functions may differ depending on the model. The figures herein are subject to change without prior notice. LG Power Manager Tour Select the [ ] button > [LG Software] to run [LG Power Manager]. 1 Minimize/Exit Button: Minimizes the size of the window or closes the window. 2 help/info: Runs Help or displays information about the software. ENGLISH LG Power Manager allows you to configure the power settings according to the usage environment to manage the battery efficiently. 120 Using Software 3 PC Settings: Allows you to change the PC settings, such as LG Hibernate, LG All-day (Recommended), Sleep, Balanced, High Performance, and Customized. ENGLISH 4 Settings information: Displays the PC settings, such as System Performance, Energy Saving, Sharp Screen, Put the Computer to Sleep, Turn off the Display, and Battery Charging. (A touchscreen model does not support the HD Technology.) Using LG Power Manager Drag the icon on the left of the screen to select the desired PC settings. Then, press the [Apply] button to apply the PC settings. 1 LG Hibernate: Configures the system settings so that you can use the battery for the longest duration. 2 LG All-day (Recommended): Changes the system settings so that you can optimize the system performance and use the battery as long as possible. (In the case of a model with standard battery, Recommended is displayed.) 3 Power saver: Saves the energy as much as possible by lowering the system performance. 4 Balanced: Maintain the balance between energy consumption and performance automatically. Using Software 121 5 High Performance: Puts emphasis on the performance, but may consume significant amount of energy. ENGLISH TIP When you connect/disconnect an AC adaptor to the system In LG Hibernate or LG All-day (or Recommended) mode, screen brightness is reduced to save the battery. 122 Using Software LG Reader Mode ENGLISH LG Reader Mode allows you to change the screen to Reader Mode or Daylight Mode according to the user's needs. The figures herein is subject to change for performance improvements without prior notice and the functions supported by LG Reader Mode may vary from models. Using LG Reader Mode 1 Press the [ ] icon on the taskbar. Using Software 123 2 Select the [Reader Mode On] or [Daylight Mode On] menu. Daylight Mode: The screen changes to appear brighter. (A touchscreen model does not support the Daylight Mode.) Select [Mode Off] to turn off the mode. ENGLISH TIP Reader Mode: The screen outputs like printed paper to prevent eyestrain. 124 Using Software Using Advanced Settings ENGLISH 1 Select the Advanced Settings menu as shown in the figure. TIP The Advanced Settings menu is activated when Reader Mode is on. 2 The [Advanced Settings] window appears as shown below. Using Software 125 ENGLISH a SYSTEM BRIGHTINESS: System brightness can be adjusted. b Color Adjustment:Color and its Brightness, Contrast and Gamma can be adjusted. c Reset: Settings are reset to the default settings. 126 Using Software DTS Headphone:X/DTS Studio Sound ENGLISH DTS Headphone:X/DTS Studio Sound provides rich, sonorous sound when you listen to music, watch videos or play games in the PC. DTS Headphone:X/DTS Studio Sound may not be applied depending on the model. The figures herein are subject to change without prior notice. Running DTS Headphone:X/DTS Studio Sound Program 1 Press [ ] icon on the right side of the task bar to run [DTS Audio]. 2 Default is DTS Studio Sound and DTS Headphone:X operates when the earphone is connected. Using Software 127 DTS Headphone:X Tour ENGLISH 1 Power: DTS Headphone:X Turns the power on/off. 2 Earbuds: Allows you to select the connected earphone. 3 Content Mode: Allows you to select entertainment/game/sport and provides optimum setting for each content. 4 Stereo Default Settings: Provides settings for stereo including wide/front/traditional. 128 Using Software DTS Studio Sound Tour ENGLISH Power: DTS Studio Sound Turns the power on/off. Bass Boost: Boosts the lowest frequencies for enhanced bass sound. Volume Leveling: Increases audio level without distortion of sound. Surround: Sets up surround sound effects through the PC's embedded speakers. 3D: Sets up 3D sound effects through the PC's embedded speakers. Equalizer: Sets the equalizer. Advanced Level: DTS Studio Sound Provides advanced options menu. TIP If you want to remove Audio Driver or DTS Headphone:X/DTS Studio Sound, remove [DTS Audio] and [Conexant High Definition Audio Driver] in the order specified and restart the system. If you want to reinstall Audio Driver or DTS Headphone:X/DTS Studio Sound, remove [DTS Audio] and [Conexant High Definition Audio Driver] in the order specified and install [Conexant High Definition Audio Driver]. Then restart and install [DTS Audio]. • If you do not remove or install them in the order specified, an error may occur. Restoring the System 129 Restoring the System If the system has an error, you can use Windows 10's recovery function to recover or restore the system to its initial pre-purchase state. CAUTION If you have deleted the restoration data in the protected area of the disk, or have arbitrarily installed another operating system, the restore function may not work. To recover the system, the AC adapter must be connected. 1 Click the [ ] button and select the Settings menu. ENGLISH Restoring the System 130 Restoring the System 2 When the [Settings] screen appears, select [Update & security]. ENGLISH 3 Select the [Recovery] menu and press [Get started] in the Reset this PC menu. Restoring the System 131 4 If the following screen appears, select a desired option to proceed with recovery. ENGLISH • Keep my files: Recovers the PC without losing any personal files. • Remove everything: Removes all items from the system and restores the system to its initial pre-purchase state. When the following screen appears, select [Yes]. 132 Restoring the System Select the options you want to proceed with the recovery. ENGLISH - Just remove my files: Factory-resets the drive where Windows is installed (for example: Drive C). - Remove files and clean the drive: Resets all partitions and drives in the system. CAUTION All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions. Restoring the System 133 LG Recovery Center RE TIP It is recommended that you create a recovery drive in case a serious error occurs in the system. CAUTION If you have deleted the restoration data in the protected area of the hard disk, the restore function may not work. All data is lost during the initialization, so you must backup all critical data in advance. 1 Turn on the PC and press [F11]. 2 When the following screen appears, select a language you want to use and then press [Next]. ENGLISH If booting is impossible due to an error with the system, you can recover the system using LG Recovery Center RE. 134 Restoring the System 3 When the following screen appears, select the [I Agree] button and then click the Next button. ENGLISH For recovery, the power adapter must be connected. Connect the system power and then recover the system. Restoring the System 135 4 When the factory reset has been completed as shown in the following figure, click the [Complete] button and then restart the system. ENGLISH 136 Restoring the System Recovery Drive ENGLISH Creating Recovery Drive Create a recovery drive in case LG Recovery Center RE is unable to recover the system. TIP This process may delete all data on the storage device designated as the recovery drive. Make sure to back up all important data in advance. 1 Right-click the [ ] button and select [Control Panel] menu. Restoring the System 137 2 Press [Recovery] in the control panel and select [Create Recovery Drive]. ENGLISH 3 When the following screen appears, select [Back up the system files to the recovery drive.] and press [Next]. 138 Restoring the System 4 Select the USB flash drive to use and press [Next] to create a recovery drive. ENGLISH 5 Once the storage device is ready, press [Finish] to complete the creation of the recovery drive. Using Recovery Drive In case LG Recovery Center RE is unable to recover the system, you can use the recovery drive to recover the system. CAUTION All data may be lost depending on the user settings during the system recovery. 1 Connect the recovery drive to the USB port of the PC. 2 Turn on the PC and press [F10] several times. 3 When the screen for selecting the boot device appears, select the connected recovery drive and press [Enter]. 4 Set the language and select the [Troubleshooting] menu. 5 Select the item you want and recover the system by following the instructions. Setup and Upgrade 139 Setup and Upgrade The figures herein may differ by language selection and are subject to change without prior notice. Using LG Update Center to install the Driver 1 Select the [ ] button > [LG Software] to run [LG Update Center]. 2 Select [Required Update] or [All List] to install the driver. TIP You can use the LG Update Center to quickly install the latest drivers, or reinstall any deleted drivers. Use LG Update Center to keep your system current and optimized. ENGLISH Installing the Driver 140 Setup and Upgrade How to Download LG Update Center ENGLISH You can install LG Update Center by downloading it from the LG Electronics Service Center (www.lg. com). Setup and Upgrade 141 Starting System Setup You setup the system when you set passwords, change the boot order, and add new peripheral devices to the machine. Items displayed on the Setup screen may differ by model type and specification. Refer to • Refer to . • Refer to . • Refer to . TIP To use the system setup (F2), booting device selection (F10), or recovery (F11), you need to restart the system (click [Restart] in the system power menu) and then immediately press the corresponding function key due to the fast booting speed. CAUTION • Do not change the system setup unless necessary. Incorrect system setup may cause errors during system operation. Use caution when changing the system setup. • For performance improvement, the system setup menu configuration and the initial setup status may be changed and may become different from images included in the user manual. ENGLISH System setup means storing the hardware configuration information of the PC in the flash memory. Through system setup, the PC retrieves various information including current date and time, memory capacity, and hard disk capacity and type. 142 Setup and Upgrade 1 Reboot the system and press [F2]. ENGLISH 2 In a few moments, the system setup screen appears. Setup and Upgrade 143 Keys Used in System Setup Function Enter Selects the current item. Esc To deselect the current item or to move to the previous screen. ▲, ▼, ◄, ► (Arrow keys) Moves the cursor up, down, left, and right. +, — Increases or decreases the item value. F10 Saves the new settings or exits the system setup. ENGLISH Keys 144 Setup and Upgrade Setting the Password ENGLISH This process is to set a password so that other people cannot use the PC or change the settings. The user can set a password while booting the system or setting up the system. The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice. CAUTION • Without the registered password, access to the system will be denied. Write down and keep the password in a safe place. Set Supervisor Password The password prevents unauthorized people from accessing the PC. By default, no password is set for the machine. If an unauthorized person changes the password in the System Setup, you will be unable to access the system. 1 After opening the system setup screen, use the arrow keys to move to [Security]. 2 When the following screen shows up, click [Set Supervisor Password] by using the arrow keys and press [Enter]. Setup and Upgrade 145 3 When the following message shows up on the screen, enter the password and press [Enter]. The 4 When the following message appears, select and press [Enter]. 5 To save the changes in the system setup, press [F10]. 6 When the following message appears, select [Yes] and press [Enter]. The PC will restart. ENGLISH password must not exceed 8 characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both. 146 Setup and Upgrade TIP • With Supervisor Password, you are authorized to set all items in the System Setup and ENGLISH to set Password on boot. In case other people also use the PC, it is recommended to set the Set User Password. Set User Password The password set by the Set User Password process is lower in level than that set by the [Set Supervisor Password] process, and so the user can use theSet User Password only after setting a password in the [Set Supervisor Password] menu. 1 After opening the system setup screen, use the arrow keys to move to [Security]. 2 When the following screen appears, press [Enter] in the [Set User Password] menu. Setup and Upgrade 147 3 When the following message shows up on the screen, enter the password and press [Enter]. The 4 When the following message appears, select and press [Enter]. 5 To save the changes in the system setup, press [F10]. 6 When the following message appears, select [Yes] and press [Enter]. The PC will restart. TIP • [User Password] allows limited access to the items in the System Setup compared to the [Supervisor Password] item. ENGLISH password must not exceed 8 total characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both. 148 Setup and Upgrade Password on boot ENGLISH Password on boot protects the system by requesting [Set Supervisor Password] or [Set User Password] during boot up. 1 After opening the system setup screen, use the arrow keys to move to [Security]. 2 When the following screen appears, set [Set Supervisor Password] only or both [Set Supervisor Password] and [Set User Password]. Setup and Upgrade 149 3 The popup screen will show up, after selecting [Password on boot] and press [Enter]. After selecting [Enable] and press [Enter], [Password on boot]will be complete. ENGLISH Set HDD Password / Set SSD Password HDD / SSD Password is used to set a password in the HDD and SSD separately from the Supervisor Password. If you set both HDD Password and SSD Password, the password input screen appears twice during system booting. If you set both HDD Password and SSD Password, the password input screen appears according to the order of [Boot Priority order] under the [Boot] menu. 1 After opening the system setup screen, use the arrow keys to move to [Security]. 150 Setup and Upgrade 2 When the following screen appears, select [Set Hard Disk Password] or [Set SSD Password] with the arrow keys and press [Enter]. ENGLISH 3 When the following message appears on the screen, enter the password and press [Enter]. The password must not exceed 8 characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both. Setup and Upgrade 151 4 When the following message appears, select and press [Enter]. ENGLISH 5 To save the changes in the system setup, press [F10]. 6 When the following message appears, select [Yes] and press [Enter]. The PC will restart. CAUTION If you forget HDD / SSD Password, you cannot restore the HDD / SSD. • The replacement of HDD / SSD due to a forgotten HDD / SSD Password is not covered by warranty. 152 Setup and Upgrade Changing or Deleting the Password ENGLISH You can delete or change the password only after entering the current password. The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice. Changing the Password 1 Execute System Setup, enter the password, and click [Enter]. 2 Change the password in the same way as setting one. Deleting the Password Execute System Setup, enter the password, and press [Enter]. Setup and Upgrade 153 2 After moving to the Security menu by using the arrow keys from the System Setup screen, select [Set Supervisor Password] and press [Enter]. ENGLISH 3 When the following message appears, enter the current password in the [Enter Current Password] field. 154 Setup and Upgrade 4 Press [Enter] in [Enter New Password] and [Confirm New Password]. ENGLISH 5 When the following message appears, select and press [Enter]. 6 To save the changes in the system setup, press [F10]. 7 When the following message appears, select [Yes] and press [Enter]. The PC will restart. Setup and Upgrade 155 Deleting the Password (Set HDD Password / Set SSD Password) 2 After moving to the [Security] menu by using the arrow keys from the System Setup screen, select [Set Hard Disk Password] or [Set SSD Password] and press [Enter]. ENGLISH 1 Execute System Setup, enter the password, and press [Enter]. 156 Setup and Upgrade 3 When the following message appears, enter the current password in the [Enter Current Password] field. ENGLISH 4 Press [Enter] in [Enter New Password] and [Confirm New Password]. 5 When the following message appears, select and press [Enter]. 6 To save the changes in the system setup, press [F10]. Setup and Upgrade 157 7 When the following message appears, select [Yes] and press [Enter]. The PC will restart. ENGLISH 158 Setup and Upgrade Restoring the Factory Default Settings ENGLISH If you have changed the system setup by mistake, you can restore the default settings. The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice. 1 After opening the system setup screen, use the arrow keys to move to [Exit]. 2 Click [Load Setup Defaults] by using the arrow keys and pressing [Enter]. 3 When the following message appears, select [Yes] and press [Enter]. The settings will be reset to the factory default. 4 To save the changes in system setup, press [F10]. Setup and Upgrade 159 5 When the following message appears, select [Yes] and press [Enter]. The PC will restart. ENGLISH TIP • When you press [F9], you can use [Load Setup Defaults]. 160 Setup and Upgrade Changing the Boot Order ENGLISH The user can change the boot order according to his or her needs, or select a boot device The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice. TIP To use the system setup (F2), booting device selection (F10), or recovery (F11), you need to restart the system (click [Restart] in the system power menu) and then immediately press the corresponding function key due to the fast booting speed. Changing Boot Order 1 Reboot the system and press [F2]. 2 Move to the [Boot] menu when the system setup screen appears. Setup and Upgrade 161 3 Go to [Boot Priority Order] and press [F5] or [F6] to change the booting order. ENGLISH 4 When you press [F10] and the following screen appears, select [Yes] and press [Enter]. 5 The changes are saved and the system reboots. 162 Setup and Upgrade Selecting a Booting Device to Use ENGLISH 1 Reboot the system and press [F10]. 2 When the Select Booting Device screen appears, select the device. Setup and Upgrade 163 3 Boots using the selected device. ENGLISH 164 Setup and Upgrade Windows 10 Auto Scaling ENGLISH The Windows 10 Auto Scaling feature for user's convenience may partially blur the screen or display some icons and texts larger. Refer to the following information to change the DPI scaling to suit your needs. 1 Press the [ ] button and select the [Settings] menu. TIP Press the [ ] key or [Ctrl] + [Esc] to display the Start menu. Setup and Upgrade 165 2 Select [System] > [Display]. ENGLISH 166 Setup and Upgrade 3 [Change the size of text, apps and other items.]Changing the item value changes the auto scaling settings. ENGLISH TIP After changing the auto scaling settings, it is recommended that you click [Sign out now] and log on to Windows again. Setup and Upgrade 167 Using Instant Booting 1 Select the [ ] button > [LG Software] to run [LG Control Center]. 2 On LG Control Center screen, set the [Instant Booting] to [ON]. 3 Shutdown the system and close the notebook PC cover. 4 When the cover is opened, the notebook PC turns on and the system starts to boot automatically. ENGLISH Instant Booting allows the system to boot automatically when the notebook PC cover is opened, so that you can use the system without pressing the power button. 168 FAQ FAQ ENGLISH FAQ Content LG Recovery Center RE If booting is impossible due to an error with the system, you can recover the system using LG Recovery Center RE. TIP It is recommended that you create a recovery drive in case a serious error occurs in the system. CAUTION If you have deleted the restoration data in the protected area of the hard disk, the restore function may not work. All data is lost during the initialization, so you must backup all critical data in advance. 1 Turn on the PC and press [F11]. 2 When the following screen appears, select a language you want to use and then press [Next]. FAQ 169 3 When the following screen appears, select the [I Agree] button and then click the Next button. ENGLISH For recovery, the power adapter must be connected. Connect the system power and then recover the system. 170 FAQ 4 When the factory reset has been completed as shown in the following figure, click the [Complete] button and then restart the system. ENGLISH FAQ 171 Using Instant Booting 1 Select the [ ] button > [LG Software] to run [LG Control Center]. 2 On LG Control Center screen, set the [Instant Booting] to [ON]. 3 Shutdown the system and close the notebook PC cover. 4 When the cover is opened, the notebook PC turns on and the system starts to boot automatically. ENGLISH Instant Booting allows the system to boot automatically when the notebook PC cover is opened, so that you can use the system without pressing the power button. 172 FAQ Windows 10 Auto Scaling ENGLISH The Windows 10 Auto Scaling feature for user's convenience may partially blur the screen or display some icons and texts larger. Refer to the following information to change the DPI scaling to suit your needs. 1 Press the [ ] button and select the [Settings] menu. TIP Press the [ ] key or [Ctrl] + [Esc] to display the Start menu. FAQ 173 2 Select [System] > [Display]. ENGLISH 174 FAQ 3 [Change the size of text, apps and other items.]Changing the item value changes the auto scaling settings. ENGLISH TIP After changing the auto scaling settings, it is recommended that you click [Sign out now] and log on to Windows again. FAQ 175 Restoring the System CAUTION If you have deleted the restoration data in the protected area of the disk, or have arbitrarily installed another operating system, the restore function may not work. To recover the system, the AC adapter must be connected. 1 Click the [ ] button and select the Settings menu. ENGLISH If the system has an error, you can use Windows 10's recovery function to recover or restore the system to its initial pre-purchase state. 176 FAQ 2 When the [Settings] screen appears, select [Update & security]. ENGLISH 3 Select the [Recovery] menu and press [Get started] in the Reset this PC menu. FAQ 177 4 If the following screen appears, select a desired option to proceed with recovery. ENGLISH • Keep my files: Recovers the PC without losing any personal files. • Remove everything: Removes all items from the system and restores the system to its initial pre-purchase state. When the following screen appears, select [Yes]. 178 FAQ Select the options you want to proceed with the recovery. ENGLISH - Just remove my files: Factory-resets the drive where Windows is installed (for example: Drive C). - Remove files and clean the drive: Resets all partitions and drives in the system. CAUTION All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions. FAQ 179 Connecting to External Display HDMI is a high-speed multimedia interface that can transfer uncompressed full digital audio and video signals. When LG Notebook PC supports SPDIF, HDMI is not supported. In some models, DTS Audio may not work when you use HDMI. TIP Ensure the monitor power is off before connecting the external monitor to the PC. Use ‘HDMI to VGA Gender' to connect to VGA port. HDMI to VGA Gender is available at LG Service Center. It supports HDCP 1.4 specifications. 1 Connect the HDMI cable to the PC and the external device (TV, monitor) that supports HDMI. 2 HDMI port transfers both video and audio simultaneously. Hence, there is no need for a separate audio connection. 3 On the PC, press [Fn] + [F7] to display monitor (projector) toggling screen. Select the desired screen output. ENGLISH Connecting to the HDMI Port 180 FAQ TIP ENGLISH • Every time [ ] + P keys are pressed, the screen output option changes. Release the keys to display the selected screen output. CAUTION • If you do not set Speaker as the default value after disconnecting the HDMI cable, the system may not produce any sound. • If a program was running already, you need to exit and restart the program for it to produce sound. FAQ 181 Using a Wired/Wireless Router A wireless / regular router has to be bought separately. Refer to the manual provided by the manufacturer for instructions. Connecting a Wireless or Regular Router If one internet line is used with a wired / wireless router and several devices are connected, this may result in a slower connection. In case of a wireless LAN, it is recommended to change the network name and security settings for a more secure connection. Network speed can differ according to operation environment and specifications. 1 Connect the internet cable of the modem that was provided by your internet provider to the router's WAN port. 2 Connect all devices (PC, IPTV, internet phone, etc.) with a LAN cable to LAN ports 1 to 4 of the router. The number of LAN ports can vary for each router model. 3 Please refer to the manual provided by the router manufacturer for setup of the network and internet. ENGLISH A wireless / regular router connects several PCs and mobile devices to one internet line and enables the use of internet and the network. 182 FAQ Wireless LAN ENGLISH The wireless network (Wireless LAN) is the network environment that connects a PC with the internet provider or company network through an Access Point (wireless or regular router). OPTION Wireless LAN is optional. Hence, it may not be installed in some models. Turning On/Off Airplane Mode Prior to using the wireless LAN, press [Fn] + [F6] to turn off Airplane mode. Pressing [Fn] + [F6] keys will turn on or off the Airplane mode. If you are not going to use the product for a while, keep the Airplane mode turned on to reduce the battery power consumption. Using the Wireless LAN If an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless LAN can easily be accessed. During the search for a wireless network (Wireless LAN), various Access Point may be found according to the location where the PC is used. In case no accessible wireless network (Wireless LAN) is near the PC, no Access Point might be found. A password protected Access Point cannot be accessed without the correct password. FAQ 1 Press the Action Center [ 183 ] icon on the right side of the taskbar. ENGLISH 184 FAQ 2 Press the [Network] tile to search for a nearby Access Point. ENGLISH TIP If Wi-Fi is turned off, press the [Wi-Fi] tile. FAQ 185 ENGLISH 3 Select the Access Point you want to connect to and press [Connect]. 186 FAQ 4 If a connection is established, [Connected] appears below the Access Point name. ENGLISH 5 click the Internet Browser icon to check whether the internet is operating normally. FAQ 187 Wired LAN Using Wired LAN Wired LAN is installed with an automatic IP (DHCP) as default value. Please refer to the following instructions for details on setting up an automatic IP (DHCP) or manual IP. 1 Connect the LAN adapter to the USB Type-C™ port on the PC. TIP The recommended network cable for the optimal network environment is CAT5 or higher. The network (LAN) cable may be connected when the LAN adapter is used. The LAN adapter may be separately purchased at LG Service Center. ENGLISH LAN is the network environment that users can connect to by using a cable to connect to their internet providers or the company's network. 188 FAQ 2 Connect the wired LAN cable to the LAN port. ENGLISH FAQ 3 Press the [ ] button and select the Settings menu. ] key or [Ctrl] + [Esc] to display the Start menu. ENGLISH TIP Press the [ 189 190 FAQ 4 Select [Network & Internet] > [Status] > [Change adapter options]. ENGLISH FAQ 191 5 Right-click [Ethernet] and select the [Properties] menu. ENGLISH 192 FAQ 6 Select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. ENGLISH FAQ 193 7 To use an automatic IP(DHCP), select [Obtain an IP address automatically]. If you wish to use a 8 Press [OK] to complete the network setup. 9 Click the Internet Browser icon to check whether the internet is operating normally. ENGLISH static IP, select [Use following IP address] to enter the address. Contact the network service provider or administrator to use a static IP. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada RSS-210 . Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5150-5250MHz is limited to use indoor only RF Exposure Information (SAR) The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This device have been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules(<1.6W/kg). Cet appareil radio est conforme au CNR‐210 d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. 5150‐5250MHz est limitée à une utilisation en intérieur uniquement
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Modify Date : 2016:11:30 20:57:22+08:00 Create Date : 2016:11:30 20:57:18+08:00 Metadata Date : 2016:11:30 20:57:22+08:00 Creator Tool : Arbortext Editor with Styler R54M080-348 Format : application/pdf Document ID : uuid:47807591-7a55-4ffb-907b-67c7e882cdc6 Instance ID : uuid:f3120772-d13c-493d-8bd1-73b7ddadf6c1 Producer : Arbortext Advanced Print Publisher 10.0.1345/W Library Has XFA : No Page Count : 104 Creator : Arbortext Editor with Styler R54M080-348EXIF Metadata provided by EXIF.tools