LG Electronics USA NT-LG14Z95 Notebook Computer User Manual Part 2

LG Electronics USA Notebook Computer Users Manual Part 2

Contents

Users Manual_Part 2

Using the PC 1013On the [PC Settings] screen, as shown below, click [PC and Device] >[Bluetooth].4When [Bluetooth] appears, search other connectible devices.ENGLISH
102 Using the PC5When a device is found, click the device to connect.ENGLISH
Using the PC 1036When the passwords are matched, click [Yes] to complete the connection.ENGLISH
104 Using the PCWired LANLAN is the network environment that users can connect to by using a cable to connect totheir internet providers or the company's network.Using Wired LANLAN is installed with an automatic IP (DHCP) as default value.Please refer to the following instructions to find out more about setting up an automatic IP(DHCP) or manual IP.1Connect the LAN adaptor to the micro USB port on the PC.TIPThe recommended network cable for the optimal network environment is CAT5 orhigher.The network (LAN) cable may be connected when the LAN adaptor is used.The LAN adaptor may be separately purchased at LG Service Center.ENGLISH
Using the PC 1052Connect LAN cable to the LAN port.3On the Start Screen, click the Desktop tile to convert to the Desktop screen.ENGLISH
106 Using the PC4Run [Charms] on the Desktop.ENGLISH
Using the PC 1075In the Charm Menu, click [Settings] >[Control Panel] >[View By] >[Small Icon] >[Network and Sharing Center].ENGLISH
108 Using the PC6Click [Change Adapter Settings].ENGLISH
Using the PC 1097Right-click [Ethernet] and select [Properties].ENGLISH
110 Using the PC8Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].ENGLISH
Using the PC 1119If you want to use an automatic IP(DHCP), select [Obtain an IP AddressAutomatically]. If you want to use a manual IP, select [Use Following IP Address] toenter the address.Please ask the network administrator about obtaining a manual IP.10 Press [OK] to complete the network setup.11 Click the [Internet Explorer] icon in the taskbar to check whether the internet is operatingnormally.ENGLISH
112 Using the PCWireless NetworkThe wireless network (Wireless LAN) is the network environment that connects a PC withthe internet provider or company network through an Access Point (wireless or regularrouter).Wireless network is optional, and so it may not be installed in some models.Turning On/Off Airplane ModePrior to using the wireless network, press [Fn] + [F6] to turn off Airplane Mode.Pressing [Fn] + [F6]keys will turn on or off. If you are not going to use the mode, keep themode turned on to reduce the battery power consumption.Using the Wireless NetworkIf an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless networkcan easily be accessed.During the search for a wireless network (Wireless LAN), various Access Point maybe found according to the location where the PC is used.In case no accessible wireless network (Wireless LAN) is near the PC, no AccessPoint might be found.A password protected Access Point cannot be accessed without knowing the rightpassword.ENGLISH
Using the PC 1131Run [Charms] on the Desktop or the Start screen.2In the Charm Menu, click [Settings] >[Wireless Network Icon].ENGLISH
114 Using the PC3Near available Access Point(wireless network) is automatically searched.ENGLISH
Using the PC 1154Select the Access Point (wireless network) you want to use and click [Connect] toconnect to the Access Point.If a password is set for the wireless network, the Enter Password windowappears.5When the connection is established, [Connected] is displayed in the connected AccessPoint(wireless network).6Click the [Internet Explorer] icon in the taskbar to check whether the internet is operatingnormally.ENGLISH
116 Using the PCUsing a Wireless or Regular RouterA wireless / regular router connects several PCs and mobile devices etc. to one internet lineand enables the use of internet and the network.A wireless / regular router has to be bought separately. Refer to the manual providedby the manufacturer for instructions.Connecting a Wireless or Regular RouterIf one internet line is used with a wireless / regular router and several devices areconnected, this may result in a slower connection.In case of a wireless network, it is recommended to change the network name and securitysettings for a more secure connection.Network speed can differ according to operation environment and specifications.1Connect the internet cable of the modem that was provided by your internet provider tothe router's WAN port.2Connect all devices (PC, IPTV, internet phone, etc.) with a LAN cable to LAN ports 1 to4 of the router.The number of LAN ports can vary for each router model.3Please refer to the manual provided by the router manufacturer for setup of the networkand Internet.ENGLISH
Using the PC 117Micro SD SlotChecking Available Memory CardThis model supports Micro SD memory cards.Directly applicablememory cards(The available memory type and capacity may differ by the PC model type.)Check availability before buying a memory card.Mounting and Using Memory CardThis product supports one Micro SD slot.Insert the card into the multi-card slot to the fullest in the right direction as shown in thefollowing figure.ENGLISH
118 Using the PCTIP•When the memory card is formatted, the data stored in the memory card will bedeleted. Check whether there are important data before formatting the memory stick.•To format a memory card, right-click the memory card drive and select Format.When Format window appears, click Start to continue.•Windows The format feature may not be available on those Windows whose versionis lower than Vista®. Format the card on other digital devices or format it afterinstalling Memory Stick Formatter.•If the writing prevention tab of memory card is locked, the user cannot format thememory stick nor write or delete the data.•SD™, MMC™memory cards can be used only as storage devices and do notsupport the copyright protection function.Removing memory cardPush the card with your finger to make the card spring out of the slot. Remove the memorycard.ENGLISH
Using the PC 119TIPTo safely removing a memory card:The figures herein may differ by language selection and is subject to change forperformance improvements without prior notice.1Click Safely Remove Hardware and other Media icon on the right side of thetaskbar.2Select Remove Multi-Card USB Device to safely remove hardware.ENGLISH
120 Using SoftwareUsing SoftwareLG Network ShareLG Network Share is software that allows you to configure and use Virtual AP and FileSharing.TIPLG Network ShareFor more details about how to use , refer to the correspondinghelp.The figures herein are subject to change without prior notice.It may not work properly depending on user preferences (security tools, etc.) and thenetwork status.If it is not a built-in communication device, you cannot use Network Share to use thevirtual AP function.LG Network Share Using the Program1Click the [] tile from the Start screen to run LG Network Share.ENGLISH
Using Software 121aVirtual AP function ON/OFF: Turn on or off the virtual AP function.bVirtual AP setup menu: You can modify the SSID, password, and the downloadfolder of the virtual AP.cConnected Device Information Tile : It provides information on all connecteddevices to the AP. Click to send a file and display the status of the transfer.ENGLISH
122 Using SoftwareLG Reader ModeLG Reader Mode prevents the users from eyestrain and helps them to read the PC screencomfortably by displaying the screen just like a printed paper.Using LG Reader ModeTIPThe user cannot arbitrarily adjust the brightness in reader mode. To adjust the screenbrightness, turn reader mode off.You can use hot keys to use the reader mode more conveniently.•Press [Fn]+[F9] keys to switch the PC screen to reader mode and press again toturn off the reader mode.1Click the [] icon on the task bar.ENGLISH
Using Software 1232Select the [Reader Mode On] menu to switch to Reader Mode as shown in the figure.TIPSelect [Reader Mode Off] to turn off the reader mode.ENGLISH
124 Using SoftwareLG Control CenterLG Control Center is software that help you to change PC Settings, Power Settings,Windows Security Settings, etc. as well as viewing system information.TIPLG Control Center For more details about how to use , refer to the correspondinghelp.The figures herein is subject to change for performance improvements without priornotice and the functions supported by LG Control Center may vary from models.Using LG Control Center1Click the [] tile on the Start screen, or the [ ] icon in Desktop to run LGControl Center.aMinimize/Exit Button: Minimizes the size of the window, or exits the software.bHelp/Information Button: Runs Help or displays information about the software.cSystem Settings : Sets up the screen brightness / resolution, external display, soundand other various devices.ENGLISH
Using Software 125dPower Management Settings : Sets up power management option, USB charging,battery status and battery life extension.eWindows Security Settings : Sets User Account Control settings and Firewallsettings.fInstant Booting: You can set the system to be automatically booted whenever youopen the LCD panel.gSystem Information : Displays the PC OS in use, processor information and othersystem information.ENGLISH
126 Using SoftwareLG Update CenterLG Update Center allows you to install various PC drivers, applications and Windowspatches easily.TIPThe illustrated images are subject to change without prior notice.It may not work properly depending on user preferences (security tools, etc.) and thenetwork status.For more information on LG Update Center, refer to [Help].Using LG Update Center1Click the [] tile on the Start screen, or the [ ] icon in Desktop mode to run LGUpdate Center.aRequired Update : Installs critical items that must be applied to the system.bAll List : Displays and installs all required items for the system.cNotification Setting : Sets up notifications for online updates for installed items.ENGLISH
Using Software 127TIPYou can use LG Update Center to install deleted drivers or latest drivers easily andquickly.Use LG Update Center to keep your system current and optimized.ENGLISH
128 Using SoftwareDTS Sound™DTS Sound™provides rich, sonorous sound when you listen to music, watch videos or playgames in the PC.DTS Sound™may not be available depending on the model.The figures herein are subject to change without prior notice.Running DTS Sound Program1On the Start Screen, click the [Desktop tile] to convert to the Desktop.2Press [Fn] + [F8] and run [DTS Sound].3When [DTS Sound] window appears, select function or device.TIPEarphone/headphone selection is available only when the device is connected.DTS Sound Tour1Power:DTS Sound Turns the power on/off.2Advanced:DTS Sound Provides advanced options menu.3Surround: Sets up surround sound effects through the PC's embedded speakers andheadphone.4Volume Max: Increases audio level without distortion of sound.ENGLISH
Using Software 1295Bass Boost: Boosts the lowest frequencies for enhanced bass sound.6Change Output Device: Changes the sound output device.TIPIf you want to remove Audio Driver or DTS Sound, remove [DTS Sound] and[Conexant HD Audio] in the order specified and restart the system.If you want to reinstall Audio Driver or DTS Sound, remove [DTS Sound] and[Conexant HD Audio] in the order specified and install [Conexant HD Audio]. Thenrestart and install [DTS Sound].•If you do not remove or install them in the order specified, an error may occur.ENGLISH
130 Using SoftwareCyberLink YouCamCyberlink YouCam is the program that can take picture or moving images through the webcamera.The figures herein are subject to change without prior notice.The web camera is optional, and so it may not be installed in some models.For more information on how to use CyberLink YouCam, refer to Help.TIPYou can change the web camera resolution on Setup menu.Using Cyberlink YouCam1Switch to the Desktop mode after clicking the [Desktop tile] in the Start screen. Andthen, click the [] icon to run the CyberLink YouCam.2CyberLink YouCam Home Page appears as follows.aViewer : Displays the Webcam screen.ENGLISH
Using Software 131bImage Gallery: Use to record pictures and moving images, play back or delete thoseimages.cFrame / Animation Effect menu: Can add a frame and animation effect on thescreen.Major ButtonsTakes pictures.Records movie clips.Takes the picture of Desktop.Configures the user preferences.Switches to the full screen view.Starts the video monitoring function.Allows you to use the Album and the Animation Effect.Allows you to use the Drawing function.Allows you to use the Zoom and Face Recognitionfunctions.Deletes the picture created using the Drawing function orclears the Animation Effect.Displays information about CyberLink YouCam.ENGLISH
132 Using SoftwareDisplays the Help.Uploads movie clips to YouTube.Uploads pictures or movie clips to facebook.Sends pictures or movie clips via e-mail.Deletes the selected picture or movie clip.ENGLISH
Restoring the System 133Restoring the SystemLG Recovery CenterIf the system has an error, you can use LG Recovery Center to use Windows 8.1 recoveryfunction to recover or restore the system to its initial pre-purchase state.TIPLG Recovery Center uses the Windows 8.1 recovery function.For more information about Windows 8.1 recovery, refer to [Windows Help and Support].CAUTIONIf you have deleted the restoration data in the protected area of the disk, or havearbitrarily installed another operating system, the restore function may not work.Click the [] icon in Desktop to run [LG Recovery Center].ENGLISH
134 Restoring the System1PC Refresh: Recovers the PC without losing any personal files.CAUTIONPC settings are reset to default and any user-installed software will be deleted.2PC Reset: Removes all items from the system and restores the system to its initial pre-purchase state.CAUTIONAll data is lost during the initialization, so you must backup all critical data in advance.It may take about 5 hours or longer depending on the system conditions.3Create Recovery Drive: You can create a recovery drive in Windows as a precautionagainst a system failure that prevents you from entering the operating system, or anyother severe system issues.a When the following screen appears, select [Copy the recovery partition from the PCto the recovery drive.] and click [Next].b When the following screen appears, select the USB flash drive and click [Next].CAUTIONThis process deletes all the data on the storage device designated as a recoverydrive. Make sure to back up its data in advance.ENGLISH
Restoring the System 135c Once the storage device is ready, click [Finish] to create a recovery drive.CAUTIONSelect [Delete the recovery partition] while creating a recovery drive to remove therecovery partition in the PC.Once the recovery partition is removed, you cannot use the recovery function ofthe PC. You can only recover the system using the recovery media.ENGLISH
136 Restoring the SystemENGLISH
Restoring the System 137Recovering from a Boot FailureIf booting is impossible due to a serious error with the system, you can recover the systemusing LG Recovery Center RE.CAUTIONIf you have deleted the restoration data in the protected area of the disk, the restorefunction may not work.Using the LG Recovery Center RECAUTIONAll data is lost during the initialization, so you must backup all critical data inadvance.1Turn on the PC and press [F11].2When the following screen appears, select a language you want to use and then click[Next].ENGLISH
138 Restoring the System3When the following screen appears, select the [Agree] button and then click the [Next]button.ENGLISH
Restoring the System 1394When the factory reset has been completed as shown in the following figure, click the[Complete] button and then restart the system.Recover by Using a Recovery DriveIf it is impossible to recover by using [F11], you can recover the system through a recoverydrive.TIPTo recover by using a recovery drive, you must have the recovery drive made through LGRecovery Center's [Create Recovery Drive].1Connect the recovery drive to the USB port of the PC.2Turn on the PC and press [F10].3When the screen for selecting the boot device appears, select the connected recoverydrive and click [Enter].4Select the [Troubleshooting] menu.5Select the item you want and recover the system following the instructions.ENGLISH
140 Setup and UpgradeSetup and UpgradeInstalling the DriverThe figures herein may differ by language selection and is subject to change forperformance improvements without prior notice.Using LG Update Center to install the Driver1Click the [] tile on the Start screen, or the [ ] icon in Desktop mode to run LGUpdate Center.2Select [Required Update] or [All List] to install the driver.For more information on LG Update Center, refer to [Help].TIPYou can use LG Update Center to install deleted drivers or latest drivers easily andquickly.For the system optimization, use LG Update Center to keep up-to-date.ENGLISH
Setup and Upgrade 141How to download LG Update CenterYou can download LG Update Center from LG Electronics Cyber Service Center (www.lg.com).ENGLISH
142 Setup and UpgradeStarting System SetupSystem setup means storing the hardware configuration information of the PC in the flashmemory. Through system setup, the PC retrieves various information including current dateand time, memory capacity, and storage device (HDD, SSD, eMMC) capacity and type.You setup the system when you set passwords, change the boot order, and add newperipheral devices to the machine.Items displayed on the Setup screen may differ by model type and spec.•Refer to .•Refer to .•Refer to .TIPTo use the system setup (F2), booting device selection (F10), or recovery (F11), you needto restart the system (click [Restart] in the system power menu) and then immediatelypress the corresponding function key due to the fast booting speed.CAUTION•Do not change the system setup unless necessary. Incorrect system setup maycause errors during system operation. Use caution when changing the systemsetup.•For performance improvement, the system setup menu configuration and the initialsetup status may be changed and may become different from images included in theuser manual.ENGLISH
Setup and Upgrade 1431Press the [F2] key after re-booting the system.ENGLISH
144 Setup and Upgrade2In a few moments, the system setup screen appears.Keys Used in System SetupKeys FunctionEnter Selects the current item.Esc To deselect the current item or to move to the previous screen.▲,▼,◄,►(Arrowkeys)Moves the cursor up, down, left, and right.F10 Stores new settings or ends the system setup.ENGLISH
Setup and Upgrade 145Setting the PasswordThis process is to set a password so that other people cannot use the PC or change thesettings.The user can set a password while booting the system or setting up the system.CAUTION•Without the registered password, access to the system will be denied. Write downand keep the password in a safe place.Set Supervisor PasswordThe password prevents unauthorized people from accessing the PC. By default, nopassword is set for the machine. If an unauthorized person changes the password in theSystem Setup, you will be unable to access the system.1After opening the system setup screen, click the [Security] button.ENGLISH
146 Setup and Upgrade2When the following screen appears, click [Enter] in the [Set Supervisor Password]menu.ENGLISH
Setup and Upgrade 1473When the following message appears, enter the password and click [OK]. Thepassword must not exceed 8 total characters consisting of letters (A - Z), numbers (0 -9), or a combination of both.ENGLISH
148 Setup and Upgrade4When the following message appears, click [OK].5To save the changes in system setup, press [F10].ENGLISH
Setup and Upgrade 1496When the following message appears, click [YES]. The PC will restart.TIP•With Supervisor Password, you are authorized to set all items in the System Setupand to set Password on boot. In case other people also use the notebook PC, it isrecommended to set the Set User Password.Set User PasswordThe password set by the [Set User Password] process is lower than that set by the [SetSupervisor Password] process, and so the user can use the[Set User Password] onlyafter setting a password in the [Set Supervisor Password] menu.ENGLISH
150 Setup and Upgrade1After opening the system setup screen, click the [Security] button.ENGLISH
Setup and Upgrade 1512When the following screen appears, click [Enter] in the [Set User Password] menu.ENGLISH
152 Setup and Upgrade3When the following message appears, enter the password and click [OK]. Thepassword must not exceed 8 total characters consisting of letters (A - Z), numbers (0 -9), or a combination of both.ENGLISH
Setup and Upgrade 1534When the following message appears, click [OK].5To save the changes in system setup, press [F10].ENGLISH
154 Setup and Upgrade6When the following message appears, click [YES]. The PC will restart.TIP•[User Password] allows limited access to the items in the System Setup comparedto the [Supervisor Password] item.Password on boot[Password on boot] menu protects the system by requesting [Set Supervisor Password]or [Set User Password] during boot up.ENGLISH
Setup and Upgrade 1551After opening the system setup screen, click the [Security] button.ENGLISH
156 Setup and Upgrade2When the following screen appears, set [Set Supervisor Password] only or both [SetSupervisor Password] and [Set User Password].ENGLISH
Setup and Upgrade 1573Click the [Off] button in the [Password on boot] menu as shown in the following figure.The button changes to [On] and the [Password on boot] setting is completed.Set SSD PasswordSSD Password is to set a password in the SSD separate from the Supervisor Password.If you set the SSD Password, the password input window appears during booting.ENGLISH
158 Setup and Upgrade1After opening the system setup screen, click the [Security] button.2When the [Security] menu appears, click the [HDD Security Status] button.ENGLISH
Setup and Upgrade 1593When the following screen appears, click [Enter] in the [Set SSD User Password]menu.ENGLISH
160 Setup and Upgrade4When the following message appears, enter the password and click [OK]. Thepassword must not exceed 8 total characters consisting of letters (A - Z), numbers (0 -9), or a combination of both.ENGLISH
Setup and Upgrade 1615When the following message appears, click [OK].6To save the changes in system setup, press [F10].ENGLISH
162 Setup and Upgrade7When the following message appears, click [YES]. The PC will restart.CAUTIONWithout the SSD Password, it is impossible to recover the SSD.•Replacement of the SSD due to a forgotten SSD Password is not covered by thewarranty.ENGLISH
Setup and Upgrade 163Changing or Deleting the PasswordYou can delete or change the password only after inputting the current password.Changing the Password1Execute System Setup, enter the password, and press [Enter].2Change the password the same way as setting one.ENGLISH
164 Setup and UpgradeDeleting the Password1Execute System Setup, enter the password, and press the [Security] button.ENGLISH
Setup and Upgrade 1652When the following screen appears, click [Enter] in the [Set Supervisor Password]menu.ENGLISH
166 Setup and Upgrade3When the following message appears, enter the current password in the [Enter CurrentPassword] field.ENGLISH
Setup and Upgrade 1674Press [Enter] in [Enter New Password] and [Confirm New Password].ENGLISH
168 Setup and Upgrade5When the following message appears, click [OK].6To save the changes in system setup, press [F10].ENGLISH
Setup and Upgrade 1697When the following message appears, click [YES]. The PC will restart.ENGLISH
170 Setup and UpgradeDeleting the Password (Set SSD Password)1Execute System Setup, enter the password, and press the [Security] button.2When the [Security] menu appears, click the [HDD Security Status] button.ENGLISH
Setup and Upgrade 1713When the following screen appears, click [Enter] in the [Set SSD User Password]menu.ENGLISH
172 Setup and Upgrade4When the following message appears, enter the current password in the [Enter CurrentPassword] field.ENGLISH
Setup and Upgrade 1735Press [Enter] in [Enter New Password] and [Confirm New Password].ENGLISH
174 Setup and Upgrade6When the following message appears, click [OK].7To save the changes in system setup, press [F10].ENGLISH
Setup and Upgrade 1758When the following message appears, click [YES]. The PC will restart.ENGLISH
176 Setup and UpgradeRestoring the Factory Default SettingsIf you have changed the system setup by mistake, you can restore the system defaultsettings.1After opening the system setup screen, click the [Save & Exit] button.ENGLISH
Setup and Upgrade 1772When the [Exit] menu appears, click [Load Setup defaults].ENGLISH
178 Setup and Upgrade3When the following message appears, click [Yes]. The settings will be reset to thefactory default.4To save the changes in system setup, press [F10].ENGLISH
Setup and Upgrade 1795When the following message appears, click [YES]. The PC will restart.TIP•You may press [F9] to use the [Load Setup defaults] menu.ENGLISH
180 Setup and UpgradeChanging Boot OrderThe user can change the boot order according to his or her needs, or select a boot deviceThe model in the example can differ from actual models and is subject to change forperformance improvements, without prior notice.TIPTo use the system setup (F2), booting device selection (F10), or recovery (F11), you needto restart the system (click [Restart] in the system power menu) and then immediatelypress the corresponding function key due to the fast booting speed.Changing Boot Order1Press the [F2] key after re-booting the system.ENGLISH
Setup and Upgrade 1812When the system setup screen appears, click the [Boot] button.ENGLISH
182 Setup and Upgrade3Drag the icon of the device to change the booting order in the [Edit Boot Order] menuto change the booting order.4To save the changes in system setup, press [F10].ENGLISH
Setup and Upgrade 1835When the following message appears, click [YES].6The changes are saved and the system reboots.ENGLISH
184 Setup and UpgradeSelecting a Boot Device to Use1Press the [F10] key after re-booting the system.ENGLISH
Setup and Upgrade 1852When the Select Boot Device screen appears. select the device.3Boots using the selected device.ENGLISH
186 Setup and UpgradeWindows 8.1 Auto ScalingWindows 8.1 Auto Scaling feature may blur the screen or display some icons and textslarger.Change the DPI scaling to fit for you as follows:1On the Start screen, click the [Desktop] tile to convert the screen to the Desktopscreen.2Right-click with the mouse on the desktop and select [Personal Settings] >[Display],and then check [Select the same size adjustment for all displayed items].ENGLISH
Setup and Upgrade 1873Select an item size to proceed as instructed.ENGLISH
188 Setup and UpgradeUsing Instant BootingInstant Booting allows the system to boot automatically when the notebook PC cover isopened, so that you can use the system without pressing the power button.1On the Start screen, press the [] tile, or on the Desktop, press the [ ] icon torun [LG Control Center].2On LG Control Center screen, set the [Instant Booting] to [ON].3Shutdown the system and close the notebook PC cover.4When the cover is opened, the PC turns on and the system starts to boot automatically.ENGLISH
FAQ 189FAQFAQ ContentRecovering from a Boot FailureIf booting is impossible due to a serious error with the system, you can recover the systemusing LG Recovery Center RE.CAUTIONIf you have deleted the restoration data in the protected area of the disk, the restorefunction may not work.Using the LG Recovery Center RECAUTIONAll data is lost during the initialization, so you must backup all critical data inadvance.1Turn on the PC and press [F11].ENGLISH
190 FAQ2When the following screen appears, select a language you want to use and then click[Next].ENGLISH
FAQ 1913When the following screen appears, select the [Agree] button and then click the [Next]button.ENGLISH
192 FAQ4When the factory reset has been completed as shown in the following figure, click the[Complete] button and then restart the system.Recover by Using a Recovery DriveIf it is impossible to recover by using [F11], you can recover the system through a recoverydrive.TIPTo recover by using a recovery drive, you must have the recovery drive made through LGRecovery Center's [Create Recovery Drive].1Connect the recovery drive to the USB port of the PC.2Turn on the PC and press [F10].3When the screen for selecting the boot device appears, select the connected recoverydrive and click [Enter].4Select the [Troubleshooting] menu.5Select the item you want and recover the system following the instructions.ENGLISH
FAQ 193Using Instant BootingInstant Booting allows the system to boot automatically when the notebook PC cover isopened, so that you can use the system without pressing the power button.1On the Start screen, press the [] tile, or on the Desktop, press the [ ] icon torun [LG Control Center].2On LG Control Center screen, set the [Instant Booting] to [ON].3Shutdown the system and close the notebook PC cover.4When the cover is opened, the PC turns on and the system starts to boot automatically.ENGLISH
194 FAQWindows 8.1 Auto ScalingWindows 8.1 Auto Scaling feature may blur the screen or display some icons and textslarger.Change the DPI scaling to fit for you as follows:1On the Start screen, click the [Desktop] tile to convert the screen to the Desktopscreen.2Right-click with the mouse on the desktop and select [Personal Settings] >[Display],and then check [Select the same size adjustment for all displayed items].ENGLISH
FAQ 1953Select an item size to proceed as instructed.ENGLISH
196 FAQLG Recovery CenterIf the system has an error, you can use LG Recovery Center to use Windows 8.1 recoveryfunction to recover or restore the system to its initial pre-purchase state.TIPLG Recovery Center uses the Windows 8.1 recovery function.For more information about Windows 8.1 recovery, refer to [Windows Help and Support].CAUTIONIf you have deleted the restoration data in the protected area of the disk, or havearbitrarily installed another operating system, the restore function may not work.Click the [] icon in Desktop to run LG Recovery Center.1PC Refresh : Recovers the PC without losing any personal files.CAUTIONPC settings are reset to default and any user-installed software will be deleted.ENGLISH
FAQ 1972PC Reset : Removes all items from the system and restores the system to its initial pre-purchase state.CAUTIONAll data is lost during the initialization, so you must backup all critical data in advance.It may take about 5 hours or longer depending on the system conditions.3Create Recovery Drive : You can create a recovery drive in Windows as a precautionagainst a system failure that prevents you from entering the operating system, or anyother severe system issues.a When the following screen appears, select [Copy the recovery partition from the PCto the recovery drive.] and click [Next].b When the following screen appears, select the USB flash drive and click [Next].CAUTIONThis process deletes all the data on the storage device designated as a recoverydrive. Make sure to back up its data in advance.ENGLISH
198 FAQc Once the storage device is ready, click [Finish] to create a recovery drive.CAUTIONSelect [Delete the recovery partition] while creating a recovery drive to remove therecovery partition in the PC.Once the recovery partition is removed, you cannot use the recovery function ofthe PC. You can only recover the system using the recovery media.ENGLISH
FAQ 199ENGLISH
200 FAQConnecting a Monitor / TVTIP•Ensure the monitor power is off before connecting the external monitor to the PC.Connecting to the HDMI PortHDMI is a high-speed multimedia interface that can transfer uncompressed full digital audioand video signals.LG Notebook PC supports either HDMI or SPDIF.In some models, DTS Sound may not work when you use HDMI.1Connect the HDMI cable to the PC and the external device (TV, monitor) that supportsHDMI.2HDMI port transfers both video and audio simultaneously. So you don't need a separateaudio connection.3Press [Fn]+[F7] to redirect the video output to the external device.ENGLISH
FAQ 201TIPSwitching screen output device by pressing [Fn]+[F7]•[Press [Fn] + [F7] to display the Toggle Screen menu. Then select the screen modeyou want and press [Enter].CAUTION•If you do not set Speaker as the default value after disconnecting the HDMI cable,the system may not produce any sound.•If a program was running already, you need to exit and restart the program for it toproduce sound.ENGLISH
202 FAQUsing a Wireless or Regular RouterA wireless / regular router connects several PCs and mobile devices etc. to one internet lineand enables the use of internet and the network.A wireless / regular router has to be bought separately. Refer to the manual providedby the manufacturer for instructions.Connecting a Wireless or Regular RouterIf one internet line is used with a wireless / regular router and several devices areconnected, this may result in a slower connection.In case of a wireless network, it is recommended to change the network name and securitysettings for a more secure connection.Network speed can differ according to operation environment and specifications.1Connect the internet cable of the modem that was provided by your internet provider tothe router's WAN port.2Connect all devices (PC, IPTV, internet phone, etc.) with a LAN cable to LAN ports 1 to4 of the router.The number of LAN ports can vary for each router model.3Please refer to the manual provided by the router manufacturer for setup of the networkand Internet.ENGLISH
FAQ 203Wireless NetworkThe wireless network (Wireless LAN) is the network environment that connects a PC withthe internet provider or company network through an Access Point (wireless or regularrouter).Wireless network is optional, and so it may not be installed in some models.Turning On/Off Airplane ModePrior to using the wireless network, press [Fn] + [F6] to turn off Airplane Mode.Pressing [Fn] + [F6]keys will turn on or off. If you are not going to use the mode, keep themode turned on to reduce the battery power consumption.Using the Wireless NetworkIf an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless networkcan easily be accessed.During the search for a wireless network (Wireless LAN), various Access Point maybe found according to the location where the PC is used.In case no accessible wireless network (Wireless LAN) is near the PC, no AccessPoint might be found.A password protected Access Point cannot be accessed without knowing the rightpassword.ENGLISH
204 FAQ1Run [Charms] on the Desktop or the Start screen.2In the Charms, click [Settings] >[Wireless Network Icon].ENGLISH
FAQ 2053Near available Access Point(wireless network) is automatically searched.ENGLISH
206 FAQ4Select the Access Point (wireless network) you want to use and click [Connect] toconnect to the Access Point.If a password is set for the wireless network, the Enter Password windowappears.5When the connection is established, [Connected] is displayed in the connected AccessPoint(wireless network).6Click the [Internet Explorer] icon in the taskbar to check whether the internet is operatingnormally.ENGLISH
FAQ 207Wired LANLAN is the network environment that users can connect to by using a cable to connect totheir internet providers or the company's network.Using Wired LANLAN is installed with an automatic IP (DHCP) as default value.Please refer to the following instructions to find out more about setting up an automatic IP(DHCP) or manual IP.1Connect the LAN adaptor to the micro USB port on the PC.TIPThe recommended network cable for the optimal network environment is CAT5 orhigher.The network (LAN) cable may be connected when the LAN adaptor is used.The LAN adaptor may be separately purchased at LG Service Center.ENGLISH
208 FAQ2Connect LAN cable to the LAN port.3On the Start Screen, click the Desktop tile to convert to the Desktop screen.ENGLISH
FAQ 2094Run [Charms] on the Desktop.ENGLISH
210 FAQ5In the Charm Menu, click [Settings] >[Control Panel] >[View By] >[Small Icon] >[Network and Sharing Center].ENGLISH
FAQ 2116Click [Change Adapter Settings].ENGLISH
212 FAQ7Right-click [Ethernet] and select [Properties].ENGLISH
FAQ 2138Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].ENGLISH
214 FAQ9If you want to use an automatic IP(DHCP), select [Obtain an IP AddressAutomatically]. If you want to use a manual IP, select [Use Following IP Address] toenter the address.Please ask the network administrator about obtaining a manual IP.10 Press [OK] to complete the network setup.11 Click the [Internet Explorer] icon in the taskbar to check whether the internet is operatingnormally.ENGLISH

Navigation menu