LG Electronics USA P880G GSM/WCDMA BAND PHONE WITH BT, WLAN, AND NFC User Manual 1 LG P880g AVC UK 120717 indd

LG Electronics MobileComm USA, Inc. GSM/WCDMA BAND PHONE WITH BT, WLAN, AND NFC 1 LG P880g AVC UK 120717 indd

UserManual.wiki >

LG Electronics USA >

P880G User Manual

User Manual

Part 15.21 statement" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.

Part 15 Class B ComplianceThis device and its accessories comply with part15 of FCC rulesand ICES-003 Class B digital apparatus requirements for Industry Canada.Operation is subject to the following two conditions:(1) This device & its accessories may not cause harmful interference.(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.Body-worn OperationThis device was tested for typical use with the back of the phone kept 0.39 inches (1 cm) from the body. To comply with FCC/IC RF exposure requirements, a minimum separation distance of 0.39 inches (1 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters, and similar accessories containing metallic components may not be used. Avoid the use of accessories that cannot maintain 0.39 inches (1 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC/IC RF exposure limits.

26Getting to know your phonePlease check to see whether any problems you encountered with your phone are described in this section before taking the phone for service or calling a service representative.1. Phone memory When there is less than 10% of space available in your phone memory, your phone cannot receive new messages. You need to check your phone memory and delete some data, such as applications or messages, to make more memory available.To uninstall applications:Touch > Apps tab > Settings > Apps from the DEVICE category.Once all applications appear, scroll to and select the application you want to uninstall.Touch Uninstall.1 2 3 2. Optimising battery lifeExtend your battery's life between charges by turning off features that you don't need to having running constantly in the background. You can monitor how applications and system resources consume battery power. Extending your phone's battery life:Turn off radio communications you are not using. If you are not using Wi-Fi, Bluetooth or GPS, turn them off.Reduce screen brightness and set a shorter screen timeout.Turn off automatic syncing for Gmail, Calendar, Contacts and other applications.Some applications you have downloaded may reduce battery power.To check the battery power level:Touch > Apps tab > Settings > About phone from the SYSTEM > StatusThe battery status (charging or not charging) and battery level (percentage charged) is displayed at the top of the screen.•••••Before you start using the phone, please read this!

27To monitor and control how battery power is being used:Touch > Apps tab > Settings > Power saver from the DEVICE > Battery use from the BATTERY INFORMATIONBattery usage time is displayed at the top of the screen. It tells you how long it has been since you last connected your phone to a power source or, if currently connected, how long the phone was last running on battery power. The screen shows the applications or services using battery power, listed in order from the greatest to smallest amount used.3. Using foldersYou can combine several app icons in a folder. Drop one app icon over another on a home screen, and the two icons will be combined.•4. Before installing an open source application and OS WARNINGIf you install and use an OS other than the one provided by the manufacturer it may cause your phone to malfunction. In addition, your phone will no longer be covered by the warranty. WARNINGTo protect your phone and personal data, only download applications from trusted sources, such as Play Store™. If there are improperly installed applications on your phone, it may not work normally or a serious error may occur. You must uninstall those applications and all associated data and settings from the phone.

285. Using unlock patternSet unlock pattern to secure your phone. This opens a screen that guide you through how to draw a screen unlock pattern. You have to create a Backup PIN as a safety measure if you forgot pattern lock.Caution: Create a Google account before setting an unlock pattern and remember Backup PIN you created while creating Pattern lock. WARNINGPrecautions to take when using pattern lock.It is very important to remember the unlock pattern you set. You will not be able to access your phone if you use an incorrect pattern 5 times. You have 5 opportunities to enter your unlock pattern, PIN or password. If you have used all 5 opportunities, you can try again after 30 seconds.When you can’t recall your unlock Pattern, PIN, or Password:<If you have forgotten pattern>If you logged in to your Google account on the phone but failed to enter the correct pattern 5 times, tab the Forgot Pattern button on the bottom of the screen. You are then required to log in with your Google Account or you have to enter Backup PIN which you entered while creating Pattern Lock.If you have not created a Google account on the phone or you forgot Backup PIN, you have to perform a hard reset.<If you have forgotten PIN or Password> If you forgot your PIN or Password, you need to do hard reset.Caution: If you perform a hard reset, all user applications and user data are deleted.Note: If you have not logged in Google Account and forgot Unlock Pattern, you need to enter Backup PIN.Getting to know your phone

308. Installing PC Software (LG PC Suite)"LG PC Suite" PC Application is a program that helps you connect your device to a PC via a USB cable and Wi-Fi. Once connected, you can use the functions of your device from your PC.With your "LG PC Suite" PC Application, You Can...Manage and play your media contents (music, movie, pictures) on your PC.Send multimedia contents to your device.Synchronises data (schedules, contacts, bookmarks) in your device and PC.Backup the applications in your device.Update the softwares in your device.Backup and restore the device.Play multimedia contents of your PC from other device.NOTE: You can use the Help menu from the application to find out how to use your "LG PC Suite" PC application.•••••••Installing "LG PC Suite" PC Application"LG PC Suite" PC application can be downloaded from the webpage of LG.Go to www.lg.com and select a coun-try of your choice.Go to Support > Mobile Phone Sup-port > Select the Model (LG-P880g).Click PC Sync from Download, and click WINDOW PC Sync Download to download "LG PC Suite" PC software.System Requirements for "LG PC Suite" PC softwareOS: Windows XP 32 bit(Service pack 2), Windows Vista 32 bit/64 bit, Windows 7 32 bit/64 bitCPU: 1 GHz or higher processors Memory: 512 MB or higher RAMsGraphic card: 1024 x 768 resolution, 32 bit colour or higherHDD: 100 MB or more free hard disk space (More free hard disk space may be needed depending on the volume of data stored.)Required software: LG integrated drivers, Windows Media Player 10 or later1 2 3 ••••••Getting to know your phone

31NOTE: LG Integrated USB DriverLG integrated USB driver is required to connect an LG device and PC and installed automatically when you install "LG PC Suite" PC software.9. Synchronising your phone to a ComputerData from your device and PC can be synchronised easily with "LG PC Suite" PC application for your convenience. Contacts, schedules, and bookmarks can be synchronised. The procedure is as follows:Connect your device to PC. (Use a USB cable or Wi-Fi connection.)After connection, run the program and select the device section from the category on the left side of the screen.Click [Personal information] to select.Select the checkbox of contents to synchronise and click the Sync button.1 2 3 4 10. Synchronising your phone to a computer via USBNOTE: To synchronise your phone with your PC using the USB cable, you need to install LG PC Suite onto your PC. Please refer to previous pages to install LG PC Suite.Touch > Apps tab > Settings > Storage from the DEVICE to check out the storage media. (If you want to transfer ﬁ les from or to a memory card, insert a memory card into the phone.)Connect the phone to your PC using the USB cable.USB connection mode list will appear, and select Media sync (MTP) option.Open the removable memory folder on your PC. You can view the mass stor-age content on your PC and transfer the ﬁ les.Copy the ﬁ les from your PC to the drive folder.Select Charge only option to discon-nect the phone. 1 2 3 4 5 6

32TIP! To use the microSD card on your phone again, you need to open the notification drawer and touch > Charge only.To disconnect your phone from the computer:Open the notification drawer and touch > Charge only to disconnect your phone from the computer safely.11. Hold your phone uprightHold your mobile phone vertically, as you would a regular phone. The LG-P880g has an internal antenna. Be careful not to scratch or damage the back of the phone, as this may affect performance.While making/receiving calls or sending/receiving data, avoid holding the lower part of the phone where the antenna is located. Doing so may affect call quality.12. When the screen freezesIf the screen freezes or the phone does not respond when you try to operate it:Remove the battery, reinsert it, then turn the phone on. ORPress and hold the Power/Lock key for 10 seconds to turn it off.If it still does not work, please contact the service centre.Getting to know your phone

33Device componentsEarpieceCamera lensProximity sensorHome keyReturn to the home screen from any screen.Back key Return to the previous screen.Power/Lock keySwitch your phone on/off by pressing and holding this key.Short press to lock/unlock the screen.••Menu key Check what options are available.Go to Google Search™ by pressing and holding this key.••NOTE: Proximity sensor When receiving and making calls, the proximity sensor automatically turns the backlight off and locks the touch screen by sensing when the phone is near your ear. This extends battery life and prevents you from unintentionally activating the touch screen during calls. WARNINGPlacing a heavy object on the phone or sitting on it can damage the LCD and touch screen functions. Do not cover the LCD proximity sensor with protective film. This could cause the sensor to malfunction.

34Battery coverPower/Lock keyCharger/USB port/MHL portEarphone JackCamera lensSIM card slotmicroSD Card slotSpeakerBatteryMicrophoneTip! Once press the volume up and down keys simultaneously, you can use QuickMemo function.Volume keysIn the home screen: Control ringer volume.During a call: Control your earpiece volume.When playing a track: Control volume continuously.•••Getting to know your phone

35QuickMemoUse QuickMemo to practically and efficiently create memos during a call, with a saved picture or on the current phone screen.Enter the QuickMemo screen by pressing both the Volume Up and Volume Down Keys for one second on the screen you want to capture. 1 Or touch and slide the Status Bar downwards and touch .Select the desired menu option from Pen type, Colour, Eraser, and create a memo.2 Touch from the Edit menu and select to save the memo with the current screen.3 NOTE: Please use a fingertip while using the QuickMemo function. Do not use your fingernail.Using the QuickMemo optionsWhile using the QuickMemo function, you can easily use the QuickMenu options. – Select if you want to use the background screen or not. – Select the pen type and the colour. – Erase the memo that you created. – Set the location where you want to save the memo. – Save the memo with the current screen. – Send or share the current QuickMemo to others.Viewing the saved QuickMemo Touch Gallery and select the QuickMemo album.

36Installing the SIM card and batteryBefore you can start exploring your new phone, you'll need to set it up. To insert the SIM card and battery:To remove the battery cover, hold the phone ﬁ rmly in one hand. With your other hand, lift off the battery cover with your thumbnail as shown in ﬁ gure.1 Slide the SIM card into the SIM card slot. Make sure the gold contact area on the card is facing downwards.Insert the battery into place by aligning the gold contacts on the phone and the battery (1) and pressing it down until it clicks into place (2).2 3 Getting to know your phone

37Align the battery cover over the battery compartment (1) and press it down until it clicks into place (2).Charging your phoneThe charger connector is at the bottom of the phone. Insert the charger and plug it into an electrical outlet.4 NOTE • The battery must be fully charged initially to improve battery lifetime.• Do not open the battery cover during the charging your phone.Using the memory cardTo insert a memory card:Insert the memory card into the slot. Make sure the gold contact area is facing downwards.To remove the memory card safely: Touch > Apps tab > Settings > Storage from the DEVICE > Unmount SD card > OK.

38NOTE: The LG-P880g supports memory cards up to 64 GB. WARNINGDo not insert or remove the memory card when the phone is on. Doing so may damage the memory card as well as your phone, and the data stored on the memory card may get corrupted.To format the memory card: Your memory card may already be formatted. If it isn't, you must format it before you can use it.NOTE: All files on your memory card are deleted when it is formatted.On the home screen, touch > Apps tab to open the menu.Scroll and touch Settings > Storage.Touch Unmount SD card and touch OK to conﬁ rm it.Touch Erase SD card > Erase SD card > Erase everything, then conﬁ rm your choice.If you have set a pattern lock, input the pattern lock then select Erase everything.1 2 3 4 5 NOTE: If there is content on your memory card, the folder structure may be different after formatting as all the files will be deleted.Locking and unlocking the screenIf you do not use the phone for a while, the screen is turned off and locked automatically. This helps to prevent accidental touches and saves battery power.When you are not using the LG-P880g, press the Power/Lock key to lock your phone. If there are any programs running when you set lock screen, they may be still running in Lock mode. It is recommended that you exit all programs before entering Lock mode to avoid unnecessary charges (e.g. phone calls, web access and data communications).To wake up your phone, press the Power/Lock key . The lock screen will appear. Touch and slide the lock screen in any direction to unlock your home screen. The last screen you viewed will open.Getting to know your phone

39Secure your lock screenYou can lock your screen so that only you can unlock it to access your phone. To set an Unlock Pattern, PIN or Password for the first time:Touch > Apps tab > Settings > Lock screen > Select screen lock > None, Swipe, Face Unlock, Pattern, PIN or Password.NOTE: Precautions to take when using pattern lock.It is very important to remember the unlock pattern you set. You will not be able to access your phone if you use an incorrect pattern 5 times. You have 5 opportunities to enter your unlock pattern, PIN or password. If you have used all 5 opportunities, you can try again after 30 seconds.•When you cannot recall your unlock pattern:If you logged in to your Google account on the phone but failed to enter the correct pattern 5 times, tap the Forgot pattern button. You are then required to log in with your Google account to unlock your phone.If you have not created a Google account on the phone or you forgot it, you have to perform a hard reset.

40Your Home screenTouch screen tipsHere are some tips on how to navigate around your phone.Touch – To choose a menu/option or open an application, touch it.Touch and hold – To open an options menu or grab an object you want to move, touch and hold it.Drag – To scroll through a list or move slowly, drag across the touch screen.Flick – To scroll through a list or move quickly, flick across the touch screen (drag quickly and release).NOTE:• To select an item, touch the centre of the icon.• Do not press too hard; the touch screen is sensitive enough to pick up a light, firm touch.• Use the tip of your finger to touch the option you want. Be careful not to touch any other keys.HomeSimply swipe your finger to the left or right to view the panels. You can customise each panel with Apps, Downloads, Widgets and wallpapers.NOTE: Some screen images may be different depending on your phone provider.On your home screen, you can view menu icons at the bottom of the screen. Menu icons provide easy, one-touch access to the functions you use the most. Touch the Phone icon to bring up the touch screen dialpad to make a call. Touch the Contacts icon to open your contacts. Touch the Messaging icon to access the messaging menu. This is where you can create a new message. Touch the Apps icon at the bottom of the screen. You can then view all your installed applications. To open any application, simply touch the icon in the applications list.

42Viewing the status barThe status bar uses different icons to display phone information such as signal strength, new messages, battery life, active Bluetooth and data connections.Below is a table explaining the meaning of icons you're likely to see in the status bar.Icon DescriptionNo SIM cardNo signalAirplane modeConnected to a Wi-Fi networkWired headsetCall in progressCall holdSpeakerphonePhone microphone is mutedMissed callBluetooth is onIcon DescriptionSystem warningAlarm is setNew voicemailRinger is silencedNFC is onVibrate modeBattery fully chargedBattery is chargingPhone is connected to PC via USB cableDownloading dataUploading dataGPS is acquiringReceiving location data from GPSData is syncingNew GmailYour Home screen

43Icon DescriptionNew Google Talk messageNew messageSong is playingFM radio turned on in the backgroundUSB tethering is activePortable Wi-Fi hotspot is activeBoth USB tethering and portable hotspot are activeOnscreen keyboardYou can enter text using the onscreen keyboard. The onscreen keyboard appears automatically on the screen when you need to enter text. To manually display the keyboard, simply touch a text field where you want to enter text.Using the keypad & entering text Tap once to capitalise the next letter you type. Double-tap for all caps. Tap to switch to the numbers and symbols keyboard. You can also touch and hold this tab to view the Settings menu. Tap to enter a space. Tap to create a new line in the message field. Tap to delete the previous character.Entering accented lettersWhen you select French or Spanish as the text entry language, you can enter special French or Spanish characters (e.g. "á").For example, to input "á", touch and hold the "a" key until the zoom-in key grows bigger and displays characters from different languages. Then select the special character you want.

44Google account set upWhen you first turn on your phone, you have the opportunity to activate the network, to sign into your Google Account and how you want to use some Google services. To set up your Google account: Sign into a Google Account from the prompted set up screen. OR Touch > Apps tab > select a Google application, such as Gmail > select New to create a new account. If you have a Google account, touch Existing, enter your email address and password, then touch Sign in.Once you have set up your Google account on your phone, your phone automatically synchronises with your Google account on the web.Your contacts, Gmail messages, Calendar events and other information from these applications and services on the web are synchronised with your phone. (This depends on your synchronisation settings.)After signing in, you can use Gmail™ and take advantage of Google services on your phone.••

45Connecting to Networks and DevicesWi-FiWith Wi-Fi, you can use high-speed Internet access within the coverage of the wireless access point (AP). Enjoy wireless Internet using Wi-Fi, without extra charges. Connecting to Wi-Fi networksTo use Wi-Fi on your phone, you need to access a wireless access point or "hotspot". Some access points are open and you can simply connect to them. Others are hidden or use security features, you must configure your phone to be able to connect to them.Turn off Wi-Fi when you're not using it to extend the life of your battery. NOTE: If you are out of the Wi-Fi zone or set Wi-Fi to OFF, additional charges may be applied by your mobile operator for mobile data use. Turning Wi-Fi on and connecting to a Wi-Fi networkTouch > Apps tab > Settings > Wi-Fi from the WIRELESS & NETWORKSSet Wi-Fi to ON to turn it on and start scanning for available Wi-Fi networks.1 2 Tap Wi-Fi menu again to see a list of active and in-range Wi-Fi networks.Secured networks are indicated by a lock icon.Touch a network to connect to it.If the network is secured, you are prompted to enter a password or other credentials. (Ask your network administrator for details)After connecting to a Wi-Fi network,the status bar displays icon that indicate Wi-Fi status.BluetoothYou can use Bluetooth to send data by running a corresponding application as on most other mobile phones.TIP! With LG-P880g, you can enjoy Bluetooth high speed. If the device you want to share files which also supports high speed Bluetooth, the files will automatically be transferred via the high-speed network. To use Bluetooth high speed data transfer, please make sure the Wi-Fi is OFF on your devices before use. The settings for Bluetooth high speed may be different depends on the device. Please check the device's settings with their service provider.3 •4 •5

46Turning on Bluetooth and pairing up your phone with a Bluetooth deviceYou must pair your device with another device before you connect to it.Touch > Apps tab > Settings > Set Bluetooth to ON from the WIRELESS & NETWORKSTap Bluetooth menu again. Your phone will scan for and display the IDs of all available Bluetooth in-range devices. If the device you want to pair which isn’t on the list, make sure the target device is set to be discoverable, then tap Search for devices again.Choose the device you want to pair up with from the list.Once the paring is successful, your device will connect to the device. Sending pictures using BluetoothSelect a Picture > > BluetoothCheck whether Bluetooth is ON, then select Search for devices.Choose the device you want to send data to from the list. 1 2 3 1 2 3 Sharing your phone's data connectionUSB tethering and portable Wi-Fi hotspot are great features when there are no wireless connections available. You can share your phone's mobile data connection with a single computer via a USB cable (USB tethering). You can also share your phone's data connection with more than a single device at a time by turning your phone into a portable Wi-Fi hotspot.When your phone is sharing its data connection, an icon appears in the status bar and as an ongoing notification in the notifications drawer.For the latest information about tethering and portable hotspots, including supported operating systems and other details, visit http://www.android.com/tether.To change Portable Wi-Fi hotspot settings:Touch > Apps tab > Settings > More from the WIRELESS & NETWORKS > Portable Wi-Fi hotspot > Choose options that you want to adjust•Connecting to Networks and Devices

47TIP! If your computer is running Windows 7 or a recent distribution of some flavours of Linux (such as Ubuntu), you don't usually need to prepare your computer for tethering. But if you're running an earlier version of Windows or another operating system, you may need to prepare your computer to establish a network connection via USB. For the most current information about which operating systems support USB tethering and how to configure them, visit http://www.android.com/tether.To rename or secure your portable hotspotYou can change the name of your phone's Wi-Fi network name (SSID) and secure its Wi-Fi network.On the home screen, touch > Apps tab > SettingsTouch More from the WIRELESS & NETWORKS and select Portable Wi-Fi hotspot.Ensure Portable Wi-Fi hotspot is ticked.Touch Conﬁ gure Wi-Fi hotspot.1 2 3 4 The Configure Wi-Fi hotspot dialog box will open.You can change the network SSID (name) that other computers see when scanning for Wi-Fi networks.You can also touch the Security menu to configure the network with Wi-Fi Protected Access 2 (WPA2) security using a pre-shared key (PSK).If you touch the WPA2 PSK security option, a password field is added to the Configure Wi-Fi hotspot dialog. If you enter a password, you will need to enter that password when you connect to the phone's hotspot with a computer or other device. You can set Open in the Security menu to remove security from your Wi-Fi network.Touch Save.ATTENTION!If you set the security option as Open, you cannot prevent unauthorised usage of online services by other people and additional charges can be incurred. To avoid unauthorised usage, you are advised to keep the security option active.••••5

48Using the Wi-Fi CastYou can share your music, picture and video content between users who use Android Phones connected via the same Wi-Fi & Wi-Fi Direct network.Check your Wi-Fi & Wi-Fi Direct network in advance and make sure the users are connected to the same network.Touch > Apps tab > Settings > More from the WIRELESS & NETWORKS > Wi-Fi Direct Touch the Wi-Fi Direct checkbox to turn on.Select a device to connect from the scanned device list.Touch Connect.Enabling Wi-Fi Direct to share through SmartShareWi-Fi Direct automatically scans nearby Wi-Fi Direct devices and the searched devices are listed as they are found and you can select a specific device to share multimedia data through SmartShare.Wi-Fi Direct cannot be enabled while using other Wi-Fi functions.1 2 3 4 Touch > Apps tab > Settings > More from the WIRELESS & NETWORKS > Wi-Fi DirectSelect a device to connect from the scanned device list.CREATE GROUP – Touch to activate group owner mode, which enables the legacy Wi-Fi devices to connect by scanning your phone. In this case you must enter the password that is set in Password.NOTE: When your phone becomes a group owner, it will consume more battery power than when it is a client. Wi-Fi Direct connection does not provide Internet service. Additional costs may be incurred when connecting and using online services. Check data charges with your network provider.1 2 Connecting to Networks and Devices

49Using SmartShareSmartShare uses DLNA (Digital Living Network Alliance) technology to share digital content through a Wi-Fi network. Both devices must be DLNA certified to support this feature.To turn SmartShare on and allow sharing contentsTouch > Apps tab > SmartSharePress and select Settings.Touch Discoverable checkbox to turn off.Touch Always accept request to turn on if you would like to automatically accept sharing requests from other devices.Touch Receive files to turn on if you would like to automatically allow upload files to my phone from other devices.Under the Sharing contents section, touch to checkmark the types of con-tent you would like to share. Choose from Pictures, Videos and Music.SmartShare is now activated and ready to share contents.1 2 3 ••4 5 To share contents from remote content library to other devicesLet your renderer device (e.g. TV) play multimedia contents from your remote content library (e.g. PC).NOTE: Make sure that the DLNA functionality of your devices is properly configured (e.g. TV and PC).Touch the top right button to or select the device from renderer lists.Touch the top left button and select the device of the remote content library.You can browse the content library.Touch a content thumbnail or press the Menu key and select Play button.To share contents from your phone to your renderer device(e.g. TV) NOTE: Make sure that your renderer device is properly configured.While browsing your pictures or videos using the Gallery application, touch to select ﬁ les. Then you will be able to select multiple ﬁ les to be shared.1 2 3 4 1

50Touch Share on the menu and select the SmartShare.SmartShare is automatically launched with the selected ﬁ les.Select the device from renderer lists to play the ﬁ les.NOTE: Follow the similar steps to use the Music Player, Camera and Video player to share contents.Notice: Check that your device is connected with your home network using Wi-Fi connection to use this application. Some DLNA enabled devices (e.g. TV) support only the DMP feature of DLNA and will not appear in the renderer device list. Your device might not be able to play some contents.To download contents from remote content libraryTouch > Apps tab > SmartShareTouch the top left button and select the device of the remote content library.You can browse the content library.Touch and hold a content thumbnail then touch Download menu key.Notice: A few types of contents are not supported.2 3 4 1 2 3 4 To upload contents from my phone to remote content libraryNOTE: Mare sure that SD card is correctly mounted and the Receive files in settings menu is checked.Touch > Apps tab > SmartShareTouch the top left button and select My phone.You can browse the content library.Touch and hold a content thumbnail and then touch the Upload menu key.Select a device of remote content library to be uploaded.Notice: Some DLNA enabled devices do not support DMS upload functionality and will not be uploaded. A few types of contents are not supported.1 2 3 4 5 Connecting to Networks and Devices

51CallsMaking a callTouch to open the keypad.Enter the number using the keypad. To delete a digit, touch the .Touch to make a call.To end a call, touch the End icon .TIP! To enter "+" to make international calls, touch and hold .Calling your contactsTouch to open your contacts.Scroll through the contact list or enter the ﬁ rst few letters of the contact you want to call by touching Search contacts.In the list, touch the contact you want to call.Answering and rejecting a callWhen you receive a call in Lock state, hold and slide the to Answer incoming call.Hold and slide the to Decline an incoming call. 1 2 3 4 1 2 3 Hold and slide the Quick msg icon from the bottom if you want to send one. TIP! Quick msgYou can send a message quickly using this function. This is useful if you need to reply the message during a meeting.Adjusting call volumeTo adjust the in-call volume during a call, use the Volume up and down keys on the left-hand side of the phone.Making a second callDuring your ﬁ rst call, touch Menu > Add call and dial the number. Also, you can go recent dialled list by touching or can search contacts by touching and select the number you want to call.Touch to make the call.Both calls are displayed on the call screen. Your initial call is locked and put on hold.Touch the displayed number to toggle between calls. Or touch Merge call to make a conference call.1 2 3 4

52To end active calls, touch End or press Home Key and slide the notiﬁ cation bar down and select End call icon .NOTE: You are charged for each call you make.Viewing your call logsOn the home screen, touch and choose the Call logs tab .View a complete list of all dialled, received and missed calls.TIP! Touch any call log entry to view the date, time and duration of the call.TIP! Press the Menu key, then touch Delete all to delete all the recorded items.Call settingsYou can configure phone call settings such as call forwarding and other special features offered by your carrier. 5 On the home screen, touch .Touch Menu.Tap Call settings and choose the options that you want to adjust.Fixed dialing numbers – To turn on and compile a list of numbers that can be called from your phone. You’ll need your PIN2, which is available from your operator. Only numbers within the fixed dial list can be called from your phone.Voicemail service – Allows you to select your carrier’s voicemail service.Voicemail settings – If you are using your carrier’s voicemail service, this option allows you to enter the phone number to use for listening to and managing your voicemail.Save unknown numbers – Add unknown numbers to contacts after a call.Call reject – Allows you to set the call reject function. Choose from Disabled, Reject calls on list or Reject all calls.Quick messages – When you want to reject a call, you can send a quick message using this function. This is useful if you need to reject a call during a meeting.1 2 3 Calls

53Call forwarding – Choose whether to divert all calls, when the line is busy, when there is no answer or when you have no signal.Call barring – Select when you would like calls to be barred. Enter the call barring password. Please check with your network operator about this service.Call duration – View the duration of calls including all calls, dialled calls, received calls and last call.Call costs – View the charges applied to your calls. (This service is network dependent; some operators do not support this function)Additional settings – This lets you change the following settings: Caller ID: Choose whether to display your number on an outgoing call. Call waiting: If call waiting is activated, the handset will notify you of an incoming call while you are on the phone (depending on your network provider).

54ContactsAdd contacts to your phone and synchronise them with the contacts in your Google account or other accounts that support contact syncing.Searching for a contactIn the home screenTouch to open your contacts. Touch Search contacts and enter the contact name using the keyboard.Adding a new contactTouch , enter the new contact's number, then press the Menu key. Touch Add to Contacts > Create new contact. If you want to add a picture to the new contact, touch the image area. Choose from Take photo or Select from Gallery.Select the contact type by touching .Touch a category of contact informa-tion and enter the details about your contact.Touch Save.1 2 1 2 3 4 5 Favourite contactsYou can classify frequently called contacts as favourites.Adding a contact to your favouritesTouch to open your contacts.Touch a contact to view their details.Touch the star to the right of the contact's name. The star turns colourful.Removing a contact from your favourites listTouch to open your contacts.Touch the tab, select Favourites at the top of the list and choose a contact to view its details.Touch the colourful star to the right of the contact's name. The star turns grey and the contact is removed from your favourites.1 2 3 1 2 3

55Moving contacts from your Old Device to your New DeviceExport your contacts as a CSV file from your old device to your PC using a PC sync program.Install "LG PC Suite" on the PC ﬁ rst. Run the program and connect your Android mobile phone to the PC using a USB cable.On the top menu, select Device > Import to device > Import contacts. A popup window to select the ﬁ le type and a ﬁ le to import will appear. On the popup, click the Select a ﬁ le and Windows Explorer will appear. Select the contacts ﬁ le to import in Windows Explorer and click the Open. Click OK. A Field mapping popup to link the contacts in your device and new contacts data will appear.If there is a conﬂ ict between the data in your PC contacts and device con-tacts, make the necessary selections or modiﬁ cations in LG PC Suite. Click OK.1 2 3 4 5 6 7 8 9

56MessagingYour LG-P880g combines SMS and MMS into one intuitive, easy-to-use menu.Sending a messageTouch on the home screen, and touch to open a blank message.Enter a contact name or contact number in the To ﬁ eld. As you enter the contact name, matching contacts appear. You can touch a suggested re-cipient. You can add multiple contacts.NOTE: You will be charged for a text message for every person you send the message to.Touch Enter message ﬁ eld and start to compose your message.Press to open the Options menu. Choose from Add subject, Discard, Attach, Insert smiley and All messages. Touch Send to send your message.The message screen opens, with your message after Recipient Name/Num-ber. Responses appear on the screen. As you view and send additional mes-sages, a message thread is created.1 2 1 2 3 4 WARNING: The 160-character limit may vary from country to country depending on the language and how the SMS is coded. WARNING: If an image, video or audio file is added to an SMS message, it is automatically converted into an MMS message and you are charged accordingly.Threaded box Messages (SMS, MMS) exchanged with another party can be displayed in chronological order so that you can conveniently see an overview of your conversation.Using SmiliesLiven up your messages using Smilies.When writing a new message, press the Menu key, then choose Insert smiley.Changing your message settingsYour LG-P880g message settings are predefined, so you can send messages immediately. You can change the settings based on your preferences.

57EmailYou can use the Email application to read emails from services other than Gmail. The Email application supports the following account types: POP3, IMAP and Exchange.Your service provider or system administrator can provide the account settings you need.Managing an email accountThe first time you open the Email application, a setup wizard opens to help you to set up an email account.To add another email account:Touch > Apps tab > Email > in the account screen, touch > Add accountAfter the initial setup, Email displays the contents of your inbox. If you have added more than one account, you can switch among accounts. To change an email account's setting:Touch > Apps tab > E-mail > in the account screen, touch > Settings••To delete an email account:Touch > Apps tab > Email > in the account screen, touch > Remove account > touch an account you want to delete > DeleteEmail account screenYou can touch an account to view its Inbox.The account from which you send email by default is indicated with a tick. – Touch to open your Combined Inbox, with messages sent to all of your accounts. Messages in the Combined Inbox are colour coded on the left, by account, using the same colours used for your accounts in the Accounts screen. – Touch the folder icon to open the account folders.Only the most recent emails in your account are downloaded to your phone. To download more (earlier) email messages, touch Load more emails at the bottom of the emails list.•

58Working with account foldersEach account has an Inbox, Outbox, Sent and Drafts folder. Depending on the features supported by your account's service provider, you may have additional folders.Composing and sending emailTo compose and send a messageWhile in the Email application, touch the .Enter an address for the message's intended recipient. As you enter text, matching addresses are offered from your Contacts. Separate multiple ad-dresses with semicolon.Add Cc/Bcc and add attachment ﬁ les if required.Enter the text of the message. Touch the .If you aren't connected to a network, for example, if you're working in airplane mode, the messages that you send are stored in your Outbox folder until you're connected to a network again. If it contains any pending mes-sages, the Outbox is displayed on the Accounts screen.1 2 3 4 5 TIP! When a new email arrives in the inbox, you will receive a notification by sound or vibration. Tap the email notification to stop notifications.E-mail

59CameraGetting to know the viewfinder Switch lenses – Switch between the rear–facing camera lens and the front–facing camera lens. Zoom – Zoom in or zoom out. Alternatively you can use the zoom in or out by pinching in or out. Time machine shot – Touch this icon to capture the missing moment before pressing the shutter. Shot mode – Choose from Normal, HDR, Panorama or Continuous shot. Settings – Touch this icon to open the Settings menu. Video mode – Touch this icon to switch to video mode. Taking a photo Gallery – Touch to view the last photo you captured. This enables you to access your gallery and view saved photos within camera mode.

60Taking a quick photo Open the Camera application.Hold the phone, point the lens towards the subject you want to photograph.Touch the screen and a focus box will appear in the viewﬁ nder screen. When the focus box turns green, the camera has focused on your subject.Click on the to capture the photo.Once you've taken the photoTouch to view the last photo you captured. Touch to share your photo using Bluetooth, Email, Gmail, Google+, Memo, Messaging, Picasa, SmartShare and Social+.TIP! If you have an SNS account and set it up on your phone, you can share your photo with the SNS community.1 2 3 4 5 Touch to delete the photo.Touch to open the options.Set image as – Touch to use the photo as a Contact photo, Lockscreen Wallpaper or Wallpaper.Move – Touch to move the photo to other place.Rename – Touch to edit the name of the selected picture.Rotate left/right – To rotate left or right.Crop – Crop your photo. Move your finger across the screen to select the area.Edit – View and edit the picture. Select the photo resolution. If you choose the high resolution, the file size will increase, which means you will be able to store fewer photos in the memory. Improves colour qualities in different lighting conditions. Applies artistic effects to the pictures. Applies the additional options for pictures.Slideshow – Auto review automatically shows you the picture you just recorded.Details – Show the picture information.Camera

61Using the advanced settingsIn the viewfinder, touch to open all advanced options. – Allows you to turn on the flash when taking a photo in dark conditions. – This defines and controls the amount of sunlight entering the photo. – Focuses on the specific spot. – Select the photo resolution. If you choose the high resolution, the file size will increase, which means you will be able to store fewer photos in the memory. – Finds the colour and light settings appropriate for the current environment. Choose from Normal, Portrait, Landscape, Sports or Night. – The ISO rating determines the sensitivity of the camera's light sensor. The higher the ISO, the more sensitive the camera is. This is useful in darker conditions when you cannot use the flash. – Improves colour qualities in different lighting conditions. – Applies artistic effects to the pictures. – Set a delay after the capture button is pressed. This is ideal if you want to be in the photo. – Activate to use your phone's location-based services. Take pictures wherever you are and tag them with the location. If you upload tagged pictures to a blog that supports geotagging, you can see the pictures displayed on a map.NOTE: This function is only available when GPS is active. – Select one of some shutter sounds. – It automatically shows you the picture you just took. – Select storage to save photos. – Restore all camera default settings. – Touch whenever you want to know how this function operates. This provides you with a quick guide.TIP! When you exit the camera, some settings return to their defaults, such as white balance, colour tone, timer and scene mode. Check these before you take your next photo.TIP! The Settings menu is superimposed over the viewfinder so, when you change elements of the photo colour or quality, you see a preview of the image change behind the Settings menu.

62Video cameraGetting to know the viewfinder Switch lenses – Switch between the rear–facing camera lens and the front-facing camera lens. Zoom – Zoom in or zoom out. Alternatively you can use the zoom in or out by pinching in or out. Brightness – This defines and controls the amount of sunlight entering the video. Effects – Live effect provides various visual effects when taking a video. Settings – Touch this icon to open the settings menu. Camera mode – Touch this icon to switch to camera mode. Start recording Gallery – Touch to view the last video you recorded. This enables you to access your gallery and view your saved videos from within video mode.

63Shooting a quick videoTouch the Camera mode button. The video camera viewﬁ nder appears on the screen.Holding the phone, point the lens to-wards the subject you want to capture in your video.Press the Record button once to start recording.A red light appears at the top corner of the viewﬁ nder with a timer showing the length of the video.Tip! – Touch to capture image during recording a video.Touch on the screen to stop record-ing.After shooting a videoYour captured video will appear on the Gallery. Touch to view the last video you recorded. Touch to play the video. Touch to share the video Bluetooth, Email, Gmail, Google+, Messaging, SmartShare or YouTube. Touch to delete the video you just made. Confirm by touching OK. The viewfinder reappears.1 2 3 4 5 6 Touch to open the options. Move – Touch to move the video to other place.Rename – Tap to edit the name of the selected video.Details – Tap to see a detailed information, such as the name, date, time, size and type.Using the advanced settingsUsing the viewfinder, touch to open all the advanced options. – Allows you to turn on the flash when recording a video in dark conditions. – Touch to set the size (in pixels) of the video you are recording. – Improves colour qualities in different lighting conditions. – Choose a colour tone to use for your new view. – Activate to use your phone's location-based services. – Choose Off to record a video without sound. – Auto review automatically shows you the video you just recorded. – Select storage to save videos. – Restore all video camera default settings.

64 – Touch if you want to know how this function operates. This provides you with a quick guide.Adjusting the volume when viewing a videoTo adjust the volume of a video while it is playing, use the volume keys on the left-hand side of the phone.Video camera

65You can store multimedia files on a memory card for easy access to all your multimedia files.Video PlayerYour LG-P880g has a built-in video player that lets you play all your favourite videos. To access the video player, Touch > Apps tab > Video Player.Playing a videoIn the home screen, touch > Apps tab > Video Player. Select the video you want to play.Touch to pause playback a video.Touch to resume playback a video.Touch to go 10 seconds forward.Touch to go 10 seconds backward.Touch to manage the video volume.Touch to set Dolby audio effectwhen connected with headset jack.Touch Speed controller icon and drag the progress bar to control playback speed.Touch Preview frame icon and drag the handler of seek bar to explore the content with a preview screen.1 2 Touch to lock a video screen. Touch the direct list icon to see the list of videos. To change the volume while listening to music, press the up and down volume keys on the left-hand side of the phone.Touch and hold any song in the list. It displays SmartShare, Delete and Details as options.GalleryTouch > Apps tab > Gallery. Open a list of catalogue bars that store all your multimedia files.Music PlayerYour LG-P880g has a built-in music player that lets you play all your favourite tracks. To access the music player, Touch > Apps tab > Music Player.Transferring music files using USB mass storage devicesConnect the LG-P880g to a PC using a USB cable.If you haven't installed LG Android Platform Driver on your PC, you need to change the settings manually. Choose Settings > Connectivity > 1 2 Multimedia

66USB connection type, then select Media sync (MTP).You can view the mass storage con-tent on your PC and transfer the ﬁ les.Playing a songIn the Home screen, touch > Apps tab > Music Player. Touch Songs.Select the song you want to play.Touch to pause playback.Touch to resume playback.Touch to skip to the next track in the album, playlist.Touch to go back to the beginning of the song. Touch twice to return to the previous song.Touch to manage the music volume.Touch to set repeat mode.Touch to set shuffle mode.Touch to see the current playlist.Touch to see lyrics. This option is on only if the song includes the lyrics. 3 1 2 3 To change the volume while listening to music, press the up and down volume keys on the left-hand side of the phone.Touch and hold any song in the list. It displays Play, Add to playlist, Set as ringtone, Delete, Share, Search and Details.NOTE: Music file copyrights may be protected by international treaties and national copyright laws. Therefore, it may be necessary to obtain permission or a licence to reproduce or copy music. In some countries, national laws prohibit private copying of copyrighted material. Before downloading or copying the file, check the national laws of the relevant country concerning the use of such material.FM RadioYour LG-P880g has a built-in FM Radio so you can tune in to your favourite stations and listen on the go.NOTE: You need to use your headphones to listen to the radio. Insert it into the headphone jack.Multimedia

67Searching for stationsYou can tune in to radio stations by searching for them manually or automatically. They are then saved to specific channel numbers, so you don't have to find them again. You can store up to 48 channels on your phone.Tuning in automaticallyIn the home screen, touch > Apps tab > FM Radio.Touch , then select Scan.During auto scanning, touch Stop if you want to stop scanning. Only scanned channels are saved before you stop scanning.NOTE: You can also manually tune in to a station using the on-screen wheel.TIP! To improve radio reception, extend the headset cord as this also functions as the radio antenna.If you connect a headset not specifically made for radio reception, radio reception may be poor.1 2 3 LG Tag+What is LG Tag+LG Tag+ allows easy saving and loading to NFC tag, which can be customized to suit certain environments.Using Tag+ writingTouch > Apps tab > LG Tag+.Select the desired mode (Car mode/Ofﬁ ce mode/Sleep mode/User mode) and tap Write on tag.Touch the back of your device to a tag or a device to share, then launching application and changing settings can be set.Using Tag+ readingWhen touching the set tag or a device, mode will be activated right away.1 2 3

68Media HomeUsing media homeTouch > Apps tab > Media HomeSelect the desired funcion among of videos, photos, music.Setting media homeTouch > Apps tab > Media Home > SettingsYou can change the settings based on your preferences.Tip!Once you connect your device to a TV or monitor via a MHL cable, media home apps will be launch automatically.1 2 1 2 Multimedia

70Setting your alarmTouch > Apps tab > Alarm/Clock > After you set the time, the LG-P880g lets you know how much time is left before the alarm will sound.Set Repeat, Snooze duration, Vibration, Alarm sound, Puzzle lock and Memo. Touch Save.Using your calculatorTouch > Apps tab > CalculatorTouch the number keys to enter numbers.For simple calculations, touch the function you want (+, –, x or ÷) fol-lowed by =.For more complex calculations, touch , select the Advanced panel, then choose sin, cos, tan, log and so on.1 2 3 1 2 3 4 Adding an event to your calendarTouch > Apps tab > CalendarOn the middle of the screen, you can ﬁ nd the different view types of the Calendar (Day, Week, Agenda).Tap on the date you want to add event on and touch Touch Event name then enter the event name.Touch Location and enter the location. Check the date and enter the time you want your event to start and ﬁ nish.If you want to add a note to your event, touch Description and enter the details.If you want to repeat the alarm, set REPEAT, and set REMINDERS, if necessary.Touch Save to save the event in the calendar.1 2 3 4 5 6 7 8 Utilities

71Polaris OfficePolaris Office is a professional mobile office solution that lets users conveniently view various types of office documents, including Word, Excel and PowerPoint files, anywhere, anytime, using their mobile devices.Touch > Apps tab > Polaris Office.Managing filesPolaris Office provides mobile users with convenient file management features, including copying, moving and pasting, and deleting files and folders right on the device.Viewing filesMobile users can now easily view a wide variety of file types, including Microsoft Office documents and Adobe PDF, right on their mobile devices. When viewing documents using Polaris Office, the objects and layout remain the same as in their original documents.BackupAbout backing up and restoring smart phone dataIt recommends that you regularly create and save a backup file on the Storage card, especially before you update any software. Maintaining a current backup file on Storage memory might allow you to recover smart phone data if your smart phone is lost, stolen, or corrupted by an unforeseen issue.This Backup application support between LG smart phones, other S/W version or OS. And so, when you buy the new LG smart phone, you can back up the current LG-P880g smart phone data on your new one.If you have preloaded application Backup & Restore on your smart phone, you can back up and restore most of your smart phone data, Apps including unprotected applications, their settings, Applications (Downloaded), Applications (Pre-installed), Bookmarks, Calendar, Call log, Contacts, Home screen, Messages, and System settings using this application.To perform a manual backup of your smart phone data.•

72To schedule automatic backups of your smart phone data.To restore your smart phone data.Back up your smart phone dataInsert to the memory card into the slot and check out the storage status.Touch the Apps tab , and then select Backup > Backup > SD Card or Internal Storage.Touch the Add new to enter a name for your backup ﬁ le, and then select Continue.Select the check box next to the item you want to back up, and then select Continue to back up.When all selected ﬁ les backed up, you will see the message ‘Done’ and select Continue to ﬁ nish backing up data.Scheduling automatic backupsYou can also enable automatic backups of the data on your smart phone according to your schedule setting. To do this, complete the following steps:••1 2 3 4 5 Insert to the memory card into the slot and check out the storage status.Touch the Apps tab , and then select Backup > Schedule.On the Scheduled Backup Location screen, touch SD Card or Internal Storage.From the list, select how often you want to back up your device data and settings, and select Continue.Select the check box next to the data you want to back up, and then select Continue to ﬁ nish the schedule set.Restoring smart phone dataTo restore data that is in your on-board device memory, mass storage mode must be turned off.NOTE: All files that are stored on your smart phone are deleted before the backup file is restored.Insert to the memory card into the slot and check out the storage status.Touch the Apps tab , and then select Backup > Restore > SD Card or Internal Storage.On the Restore screen, select a backup ﬁ le that contains the data you want to restore. 1 2 3 4 5 1 2 3 Utilities

73Select the check box next to the item you want to restore, and then select Continue to restore to phone.NOTE: Please note that your phone data will be overwritten with the contents of your backup.If the backup ﬁ le is encrypted, type the password that you set to encrypt. When all selected ﬁ les restored, you will see the message ‘Done’ and select Yes to restart the phone.NOTE: • While in Mass storage mode, this Backup Application cannot be functioned. Select Charge only option when the USB cable is connected.• You can set Enable encryption to encrypt your backup files for extra protection.4 1 2 Press the Menu from the Backup screen, and select Settings > Security and select the check box. And after enabling encryption, To restore synchronised organizer data, you must have an activation password.NOTE: You can also enable automatic delete old backups and only keep the most recent backup. Press the Menu from the Backup screen, and select Settings > Scheduled backup > Auto delete old backups to select the number of scheduled backups to keep.

74The webBrowserBrowser gives you a fast, full-colour world of games, music, news, sport, entertainment and much more, right on your mobile phone. Wherever you are and whatever you enjoy.NOTE: Additional charges apply when connecting to these services and downloading content. Check data charges with your network provider.Using the web toolbar Touch to go back a page. Touch to go forwards a page, to the page you connected to after the current one. This is the opposite of what happens when you press the Back key, which goes to the previous page. While holding down the icon, tilt the device toward body to zoom in or reverse to zoom out. Touch to add a new window. Touch to access bookmarks.Using optionsPress to view options.Refresh – Update the current web page.Save to bookmarks – Add the current web page as bookmark.Go to Homepage – Allow you to go to a homepage.Share page – Allows you to share the web page with others.Find on page – Allows you to find letters or words on the current web page.Request desktop site – Allows you to view the web page as desktop.Save for offline reading – Save current page to read it during offline.Brightness – Modify viewing brightness for comfortable web browsing.Settings – Displays Browser settings.Exit – Exit from the menu list.

75SettingsIn the home screen, touch > Apps tab > Settings.WIRELESS & NETWORKSHere, you can manage Wi-Fi and Bluetooth. You can also set up mobile networks and switch to airplane mode.< Wi-Fi >Wi-Fi – Turns on Wi-Fi to connect to available Wi-Fi networks.TIP! How to obtain the MAC addressTo set up a connection in some wireless networks with MAC filters, you may need to enter the MAC address of your LG-P880g into the router.You can find the MAC address in the following user interface: Touch Apps tab > Settings > Wi-Fi > > Advanced > MAC address.< Bluetooth >Turns on Bluetooth to connect to Bluetooth devices.< Data usage >Displays the data usage and set mobile data limit.< Call >You can configure phone call settings such as call forwarding and other special features offered by your carrier.< More >Airplane mode – After switching to airplane mode, all wireless connections are disabled.Wi-Fi Direct – You can turn on or off.Portable Wi-Fi hotspot – You can configure the portable Wi-Fi hotspot settings.NFC – Your LG-P880g is NFC-enabled mobile phone. NFC (Near Field Communication) is a wireless connectivity technology that enables two-way communication between electronic devices. It operates over a distance of a few centimeters. You can share your contents with a NFC tag or another device via simple touch with your device. If you touch a NFC tag with your device, it will display the tag contents on your device.NOTE: Be careful not to scratch or damage the inside of the battery cover as this is the NFC antenna. To switch NFC on or off: From the home screen, touch and slide the

77< Display >Brightness – Adjust the screen brightness.Auto-rotate screen – Set to switch orientation automatically when you rotate the phone.Screen timeout – Set the time for screen timeout.Font type – Change the type of the display.Font size – Change the size of the display font.Front key light – Set the front key LED time.Motion sensor calibration – Improve the accuracy of the tilt and speed of the sensor.< Home screen >Set the Theme, Animation, Screen swipe effect or Wallpaper. Select the option to set Scroll wallpaper, Scroll screens circularly and Home backup & restore.< Lock screen >Select screen lock – Set a screen lock type to secure your phone. Opens a set of screens that guide you through drawing a screen unlock pattern. You can set among of None, Swipe, Face Unlock, Pattern, PIN, Password.When you turn on your phone or wake up the screen, you're asked to draw your unlock pattern to unlock the screen.Wallpaper – You can select the wallpaper lock from Wallpapers or Gallery.Owner info – Show owner info on lock screen.< Gesture >Move home screen items – Press and hold item and tilt device to move item within home screens or applications.Tilt sensitivity – Test and adjust sensitivity of tilt sensor for home screen and applications.Pending incoming calls – Flip device to mute incoming call.Snooze or stop alarm – Flip device to snooze or stop alarm.Pause video – Flip device to pause playing video.Help – Help for gesture functions.< Storage >INTERNAL STORAGE – View the internal storage usage.SD CARD – Check total available SD card space. Touch Unmount SD card for safe removal. Erase SD card if you want to delete all data from the SD card.

78< Power saver >Here, you can manage the battery and check the power saving items. Also, you can check the battery use.< Apps >You can view and manage the applications.PERSONAL< Accounts & sync >Permits applications to synchronise data in the background, whether or not you are actively working in them. Deselecting this setting can save battery power and lowers (but does not eliminate) data usage.< Location services >Google's location service – If you select Google's location service, your phone determines your approximate location using Wi-Fi and mobile networks. When you select this option, you're asked whether you consent to allowing Google to use your location when providing these services.GPS satellites – If you select GPS satellites, your phone determines your location to street level accuracy.Location & Google search – If you select google use your location to improve search results and other services.< Security >Set up SIM card lock – Set up SIM card lock or change the SIM PIN.Make passwords visible – Show password as you type.Device administrators – View or deactivate device administrators.Unknown sources – Default setting to install non-Market applications.Trusted credentials – Display trusted CA certificates.Install from storage – Choose to install encrypted certificates from your SD card.Clear credentials – Remoce all certificates.< Language & input >Use the Language & input settings to select the language for the text on your phone and for configuring the on-screen keyboard, including words you've added to its dictionary.< Backup & reset >Change the settings for managing your settings and data.Back up my data – Set to back up your settings and application data to the Google server.Backup account – Set to back up your account.Settings

79Automatic restore – Set to restore your settings and application data when the applications are reinstalled on your device.Factory data reset – Reset your settings to the factory default values and delete all your data. If you reset the phone in this way, you are prompted to reenter the same information as when you first started Android.SYSTEM< Date & time >Use Date & time settings to set how dates are displayed. You can also use these settings to set your own time and time zone rather than obtaining the current time from the mobile network.< Accessibility >Use the Accessibility settings to configure accessibility plug-ins you have installed on your phone.NOTE: Requires additional plug-ins.< Connectivity >USB connection type – You can set the desired mode (Charge only, Media sync (MTP), USB tethering, LG software or Camera (PTP).Ask on connection – Ask USB connection mode when connecting to a computer.Help – Help for connectivity.On-Screen Phone settings – Displaying screen and controlling phone from PC are available through USB, Bluetooth or Wi-Fi connection.PC Suite Wi-Fi connection – Check mark this to use LG PC Suite with Wi-Fi connection.Please note that Wi-Fi network should be connected for LG PC Suite via Wi-Fi connection from the WIRELESS & NETWORKS.< About phone >View legal information and check phone status and software version.Phone software updateLG Mobile phone software update from the InternetFor more information about using this function, please visit http://update.lgmobile.com or http://www.lg.com/common/index.jsp select country and language.

80This feature allows you to update the firmware on your phone to a newer version conveniently from the Internet without needing to visit a service centre. This feature will only be available if and when LG makes a newer firmware version available for your device.As the mobile phone firmware update requires the user's full attention for the duration of the update process, please make sure you check all instructions and notes that appear at each step before proceeding. Please note that removing the USB data cable or battery during the upgrade may seriously damage your mobile phone.NOTE: LG reserves the right to make firmware updates available only for selected models at its own discretion and does not guarantee the availability of the newer version of the firmware for all handset models.LG Mobile Phone software update via Over-the-Air (OTA)This feature allows you to update your phone's software to a newer version conveniently via OTA, without connecting with a USB data cable. This feature will only be available if and when LG makes a newer firmware version available for your device.First, you can check the software version on your mobile phone: Settings > About phone > Software update > Check now for update.You can also delay the update by 1 hour, 4 hours, 8 hours or One day. In this case, the application will notify you to update when the time is up. You can also rearrange an update manually.NOTE: Your personal data from internal phone storage—including information about your Google account and any other accounts, your system/application data and settings, any downloaded applications and your DRM licence—might be lost in the process of updating your phone's software.Therefore, LG recommends that you back up your personal data before updating your phone's software. LG does not take responsibility for any loss of personal data.Settings

81NOTE: This feature is dependent on your network service provider, region and country.DivX HD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.DivX Certified® to play DivX® video up to HD 720p, including premium contentDivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

82On-Screen Phone allows you to view your mobile phone screen from a PC via a USB or Bluetooth connection. You can also control your mobile phone from your PC, using the mouse or keyboard.On-Screen Phone icons Connects your mobile phone to your PC, or disconnects it. Changes the On-Screen Phone preferences. Exits the On-Screen Phone programme. Maximises the On-Screen Phone window. Minimize the On-Screen Phone window.On-Screen Phone featuresReal-time transfer and control: displays and controls your mobile phone screen when connected to your PC.Mouse control: allows you to control your mobile phone by using the mouse to click and drag on your PC screen.Text input with keyboard: allows you to compose a text message or note using your computer keyboard.•••File transfer (mobile phone to PC): sends files from your mobile phone (e.g. photos, videos, music and Polaris Office files) to your PC. Simply right-click on the file which you want to send to PC and click on "Save to PC". File transfer (PC to mobile phone): sends files from your PC to your mobile phone. Just select the files you wish to transfer and drag and drop them into the On-Screen Phone window. The files sent are stored in internal SD card.Real-time event notifications: prompts a pop-up to inform you of any incoming calls or text/multimedia messages.How to install On-Screen Phone on your PCVisit LG Home (www.lg.com) and select a country of your choice.Go to Support > Mobile Phone Sup-port > Select the Model (LG-P880g) > Click OSP ( On-Screen Phone ) to download. You can install the On-Screen Phone on your PC.•••1 2 LG On-Screen Phone

Navigation menu