LG Electronics USA P970H Cellular/PCS GSM/WCDMA/EDGE Phone with WLAN and Bluetooth User Manual 2011022309171913741 LG P970h
LG Electronics USA Cellular/PCS GSM/WCDMA/EDGE Phone with WLAN and Bluetooth 2011022309171913741 LG P970h
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2
Camera m Touch to set the image as Contact icon or Wallpaper. Touch to edit the name of the selected picture. Touch to delete the image. Touch to take another photo immediately. D Touch to view the last photo you captured. Using the advanced settings In the viewfinder, touch E to open all advanced options. You can change the camera setting by scrolling the wheel. After selecting the option, touch the Back key. Focus — Touch this icon to select the options menu. See Using the focus mode. Image size — Touch to set the size (in pixels) of the picture you are taking. Scene mode — Choose from Auto, Portrait, Landscape, Sports, Sunset and Night. ISO — The ISO rating determines the sensitivity of the camera‘s light sensor. The higher the ISO, the more sensitive the camera will be. This is useful under darker conditions when you cannot use the flash. White balance — Choose from Auto, Incandescent, Sunny, Fluorescent and Cloudy. Colour effect — Choose a colour tone for your new photo. Choose from None, Sepia, Black & white, Negative, Vivid, Negative sepia, Blue, Emboss and Solarise. Timer — The sell-timer allows you to set a delay before a picture is taken after the shutter is pressed. Shot mode — Select various shooting modes from the options. Image quality — Choose from Superfine, Fine and Normal. The finer the quality, the sharper the photo. However, the file size will increase as a result, which means you’ll be able to store fewer photos in the memory. Stabilisation — Select On to compensate for unsteady hands. Auto review — If you set Auto review to on, it will show you the picture you have just taken automatically. Shutter sound — Select one of the four shutter sounds. Tag location — Activate to use your phone’s location-based services. Take pictures wherever you are and tag them with the location. If you upload tagged pictures to a blog that supports geotagging, you can see the pictures displayed on a map. NOTE: This function is only available when GPS is active. Q Restore all camera default settings. 0 Touch whenever you want to know how this function operates. This is to provide you with a quick guide. TIP! When you exit the camera, all settings will return to their defaults, except image size and image quality. Any non- default settings must be reset, such as colour tone and ISO. Check these before you take your next photo. TIP! The settings menu is superimposed over the viewfinder, so when you change elements of the image colour or quality, you will see a preview of the image change behind the settings menu. Camera Viewing your saved photos TIP! In the thumbnail list you can move quickly by holding G-key and tilting right or left. a) TIP! Press the G-key to zoom ln/Out of the photo. Once you are zoomed into a photo, hold down the G-key and tilt the phone or use the grid to move around a photo. TIP! Tapping the left or right side of the phone while photo is viewing allows you to go to the previous/next photo. 1 You can access your saved photos from within the camera mode. Just touch E] and your gallery will appear on the screen. Touch the photo on the screen. You will then see Slideshow and Menu. I: Touch to see slide show. Touch Menu and select the options you want. a Touch to share the contents. Touch to delete a photo. [é] Touch More for more options below. Details — Find out more information about the contents. Set as — Set as contact icon or wallpaper. Crop - Crop your photo. Move your finger across the screen to select the area. Rotate — Rotate left or right. Edit — Touch to edit the image using various tools. Video camera Getting to know the viewfinder 7 Zoom — Zoom in or zoom out. Alternatively, you can use the side volume keys. Before starting to record a video, you can use the zoom function. You can't control the zoom function during recording. — Convert — You can convert to the internal camera from the external one. Camera mode — Slide up this icon to switch to camera mode. Start recording Gallery - Touch to view the video you recorded last. This enables you to access your gallery and view your saved Settings ' TOW“ this icon to videos from within the video open the settings menu. See mode. Using the advanced settings. — Flash - Allows you to turn on the flash when taking a photo in a dark place. 7 Brightness - This defines and controls the amount of sunlight entering the video. Slide the brightness indicator along the bar, towards to lower the brightness of the video or towards + to increase it. Video camera Shooting a quick video 1 Open the Camera application and slide the camera mode button down to the Video position. The shutter icon @ will change to Q. 2 The video camera viewfinder will appear on the screen. 3 Holding the phone horizontally, point the lens towards the subject of the video. 4 Touch the start video icon @. REC will appear at the bottom of the viewfinder with a timer showing the length of the video. 6 Touch the stop video icon @ to stop recording. TIP! Your LG-P970h features 468 video capability. 01 After shooting a video A still image representing your video will appear on the screen. Touch to play the video. m Touch to share your video via Bluetooth, Email, Gmail, Messaging or YouTube. NOTE: Additional charges may apply when MMS messages are downloaded while roaming. m Touch to edit the video you recorded. Rename Touch to edit the name of the selected video. Touch to delete the video you just made and confirm by touching Yes. The viewfinder will reappear. Q louch to shoot another video straight away. I] Touch to view the last video you recorded. Using the advanced settings Using the viewfinder, touch E to open all the advanced options. Adjust the video camera settings by scrolling the wheel. After selecting the option, touch the Back key. Video size — Touch to set the size (in pixels) of the video you record. Choose your video image size from HD (1280x720), TV (720x480), VGA (640x480), QVGA (320x240) or 0CIF (176x144). White balance — The white balance ensures that white areas in your video are realistic. To enable your camera to adjust the white balance correctly, you may need to determine the light conditions. Choose from Auto, Incandescent, Sunny, Fluorescent and Cloudy. Colour effect — Choose a colour tone to use for your new view. Choose from None, Sepia, BIack&White, Negative, Vivid, Negative sepia, Blue, Emboss and Solarize. Video quality — Choose from Super fine, Fine and Normal. Video duration — Set a duration limit for your video. Choose between Normal and MMS to limit the maximum size to send as an MMS message. Voice — Choose Mute to record a video without sound. Auto review — If you set this to On, it will automatically show you the video you have just recorded. Q Reset all the video camera settings. 0 Touch whenever you want to know how this function operates. This is to provide you with a quick guide. \/ideo camera Watching your saved videos 1 In the viewfinder, touch D. 2 Your gallery will appear on the screen. 3 Touch a video once to bring it to the front of the gallery. It will start to play automatically. TIP! Flip your phone to pause the playing video. Adjusting the volume when viewing a video To adjust the volume of a video while it is playing, use the volume keys on the left side of the phone. Multimedia Gallery You can also save your files to your external memory card. The advantage of using a memory card is that you can free up space on your phone memory. Touch Applications tab, then select Gallery. 1 You can access your saved photos from within the camera mode. Just touch E] and your gallery will appear on the screen. Touch the photo on the screen. You will then see Slideshow and Menu. Touch to see slide show. Touch Menu and select the options you want. i: Touch to share the contents. ‘fi Touch to delete a photo. @ Touch More for more options below. Details - Find out more information about the contents. Set as - Set as contact icon or wallpaper. Crop — Crop your photo. Move your finger across the screen to select the area. Rotate - Rotate left or right. Edit - Touch to edit the image using various tools. To change how the contents of an album are displayed You can view the images and videos in your albums in a chronological grid or in stacks, sorted by the date and the location where they were taken. m Drag the Album View switch to the left to view the album contents in a chronological grid. ' a Drag the Album View switch to the right to view the contents of the album in stacks. Multimedia Music Your LG-P970h has a built-in music player that lets you play all your favourite tracks. To access the music player, touch Applications tab, then select Music. Playing a song 1 On the home screen, touch Applications tab and select Music. Touch Songs. Select the song you want to play. Touch m to pause the song. Touch m] to skip to the next song. Touch to go back to the first part of the song. Touch twice to go back to the previous song. To change the volume while listening to music, touch the up and down volume keys on the left side of the phone. Touch and hold any song in the list. It will display Play, Add to playlist, Use 01-th 03 as ringtone, Delete, Share, Search and File info as options. KT TIP! Double tapping left side on the phone during playing music, you can go to the previous song. Single tapping right side on the phone during playing music, you can go to the next song. NOTE: Music file copyright may be protected by international treaties and national copyright laws. Therefore, it may be necessary to obtain permission or a licence to reproduce or copy music. In some countries, national laws prohibit private copying of copyrighted material. Before downloading or copying the file, please check the laws of the relevant country concerning the use of such material. Using the radio Your LG-P970h has a built-in FM radio so you can tune in to your favourite stations and listen on the go. NOTE: You must attach your headphone to listen to the radio. Insert that into the headphone jack. Searching for stations You can tune in to radio stations by searching for them manually or automatically. They will then be saved to specific channel numbers, so you don’t have to keep re—tuning it. 1 On the home screen, touch Applications tab and select FM Radio. 2 Touch the Scan FM radio stations. 3 If there are pre-set channels, you will see a pop—up with 'All channels will be reset. Continue?‘. If you choose 0K, all the pre—set channels will be deleted and auto scan will start. 4 During auto scanning, touch Stop scanning if you want to stop scanning. Only channels scanned before you stop scanning will be saved. NOTE: You can also manually tune in to a station using the Wheel displayed. Listening to the radio 1 On the home screen, touch Applications tab and select FM radio. 2 Touch the channel number of the station ou want to listen to. 3 Touch icon.You can listen to the radio via built-in speaker. Multimedia Transferring files using - After using USB mass storage USB mass storage function, if you want to synchronise devices your phone with your PC using To transfer files using USB devices: the LG PC suite, you need to touch Settings > Applications > Development > uncheck Connect the LG—P970h to a PC USB debugging, then touch the USiflQ a USB cable. checkmark to touch Turn on USB If you haven't installed LG Android storage. Platform Driver on your PC, you will need to change settings How to save music/ mam-13W; Choose Settings > video files to your phone Applications > Development 1 Connect your phone to the PC > uncheck USB debugging and using the USB cable connect your phone to your PC using the USB data cable. . Touch and drag down the status bar on the home screen. Select 3 TOUCh Turn 0“ USB storage. USB connected > Turn on USB 4 You can View the mass storage storage > Open folder to view contents on your PC and transfer files. the files. - If you haven't installed LG Android NOTE: . . Platform Driver on your PC, You need To lflSta” VOUF mrcroSD you Will need to set it manually. card first. Without a microSD card, For more information, refer to YOU CfiflflOt USB USB mass storage. 'Transferring files using mass storage devices'. 2 Save music or video files from your PC to the phone's removable storage. - You may copy or move files from your PC to the phone's removable storage using a card reader. - If there is a video file with a subtitle file (.smi or sit file with the same name as the video file), place them in the same folder to display the subtitle automatically when playing the video file. - When downloading music or video files, copyright must be secured. Please note that a corrupted file or file with a wrong extension may cause damage to your phone. How to move contacts from your old phone to your current phone Export your contacts as a CSV file from your old phone to your PC using a PC sync program. 1 Download Mobile Sync for Android at www.lg.com and install it on your PC. Run the program and connect your Android mobile phone to the PC using a USB cable. 2 Select the Contacts icon. Go to Menu > File > Import and select the CSV file saved in the PC. 3 If the fields in the imported CSV file are different from the ones in Mobile Sync for Android, you need to map the fields. After mapping the fields, click OK. Then the contacts are added in Mobile Sync for Android. 4 If the connection for the LG— P970h phone (using the USB cable) is detected by Mobile Sync for Android, click "Sync" or "Sync contacts" to synchronise the contacts saved in the PC to your phone and save them. Multimedia How to send data from your phone via Bluetooth You can send data via Bluetooth by running a corresponding application, rather than from the Bluetooth menu as with normal mobile phones. . Sending pictures: Run the Gallery application and select Picture > Menu. Click Share and select Bluetooth > Check if Bluetooth is turned on and select Scan for devices > Choose the device you want to send data from the list. . Exporting contacts: Run the Contacts application. Touch the address you want to export to. Touch the Menu and select Share > Bluetooth > Check if Bluetooth is turned on and select Scan for devices > Choose the device you want to send data from the list. Sending multi-selected contacts: Run the Contacts application. To select more than one contact touch the Menu key and touch the Menu key and touch Share. Select the contacts you want to send or touch Select all > Share(n) > Bluetooth > Check if Bluetooth is turned on and select Scan for devices > Choose the device you want to send data from the list. Connecting to FTP (Only the FTP server is supported on this handset): Settings > Wireless & networks > Bluetooth settings. Then, select the Discoverable checkbox and search for other devices. Find the service you want and connect to the FTP server. Google applications 1 First, set up a Google account. Enter your user name and password. 2 After signing in, your contacts, email and calendar in your Google account will automatically synchronise with your LG—P970h. Maps Check your current location and traffic and receive directions to your destination. Your phone must be connected to Wi-Fi or SG/GPRS. NOTE: Google Maps does not cover all cities and countries. Market Android Market lets you download useful applications and games. If you install applications and games from Android Market, they appear in the LG—P970h menu. You can check others' comments regarding an application or you can post your own comments. Gmail Gmail is configured when you first set up your phone. Depending on your synchronisation settings, Gmail on your phone is automatically synchronised with your Google account on the web.The inbox conversations list is your default Gmail view. Touch the Menu key, then touch Refresh to send or receive new emails and to synchronise your emails with your Google account on the web. With the Menu key, you can compose an email, add accounts, go to labels, search and so on. Utilities Setting your alarm On the home screen, touch Applications tab and select Alarm/Clock. 2 If you want to add a new alarm, touch New alarm. 3 Set the alarm and touch Save to turn on. TIP! Flip your phone to snooze the Alarm if you set the snooze duration or else it will stop. NOTE: To delete the alarm on alarm list screen, touch the Menu key and select Delete/Delete all. Using your calculator On the home screen, touch Applications tab and select Calculator. Touch the number keys to enter numbers. For simple calculations, touch the function you want (+, —, x or +), followed by z. 4 For more complex calculations, touch Advanced panel, then choose sin, cos, tan, log and so on. Adding an event to your calendar 1 On the home screen, touch Applications tab and select Calendar. 2 First, you must create a Google account to use Calendar. 3 To check the event, touch the date. Touch and hold if you want to add a new event. then touch New event. 4 Touch What, then enter the event name. Check the date and enter the time you want your event to begin and finish. 5 Also touch Where, then enter the location. 6 If you would like to add a note to your event, touch Description and enter the details. If you want to repeat the alarm, set Repetition and set Reminders if necessary. Touch Done to save the event in the calendar. A coloured square in the calendar will mark all days that have saved events. An alarm will sound at the event start time to help you stay organised. Recording a sound or voice Use the voice recorder to record voice memos or other audio files. ho.) On the home screen, touch Applications tab and select Voice Recorder. Touch a Record to begin recording. Touch n Stop to end recording. Touch P Play to listen to the recording. Touch List to access your album. You can listen to the saved recording. TIP! Touch Speaker button to set the speaker mode. Touch I to Rename and Set as. Go to the menus by touching long the record file. Notice: The available recording time may differ from the real time. Sending the voice recording 1 Once you have finished recording, you can send the audio clip by touching Share. 2 Choose from Bluetooth, Email, Gmail and Messaging. When you select Email, Gmail and Messaging, the voice recording will be added to the message that you write, and it will be sent normally. The Web Browser Browser gives you a fast, full-colour world of games, music, news, sports, entertainment and much more, right on your mobile phone. Wherever you are and whatever you’re into. NOTE: Additional charges apply when connecting to these services and downloading content. Check data charges with your network provider. TIP! Press the G—key to zoom in or out of the web pageWhen press long to zoom in, you can view the image with panning. Using options Touch the Menu key to view options. 6 New window: Open a new window. fi Bookmarks: Add/show bookmark, show most visited site and history. if Windows: Show all your open windows (3 Refresh: Touch to refresh the web page. » Fonivard: Goes to the page you connected to after the current page. The Back key takes you to the previous page. G More - Add bookmark: Add the current web page as a bookmark. - Find on page: If you enter a letter or word, it will mark all the letters you entered from the web page. - Select text: Touch and select the lines you want to copy. Long touch any input box then you can paste it. - Page info: Show the web page information. - Share page: Send the web page. . Downloads: Show downloaded history. - Settings: Change web browser settings. NOTE: To return the previous web page, touch Back key. Settings On the home screen, touch Applications tab then scroll and touch Settings. Wireless & networks Here you can manage Wi-Fi, SmartShare and Bluetooth. You can also set mobile networks and flight mode. Flight mode — After setting Flight mode, all wireless connections will be disabled. Wi-Fi — Touch to select: This turns on Wi—Fi to connect to available Wi—Fi networks. < Incoming calls > Phone ringtone — Allows you to set yOJI’ default incoming call ringtone. < Notifications > Notification ringtone — Allows yOJ to set your default notification rirgtone. < Feedback > Audible touch tones — Allows y0J to set the phone to play tones when using the dial keypad to dial numbers. Audible selection — Allows you to set your phone to play a sound when y0J touch buttons, icons and other onscreen items that react to your touch. Screen lock sounds — Allows you to set your phone to play a sound when locking and unlocking the screen. Haptic feedback — Allows you to set your phone to vibrate briefly when you touch the soft keys and perform other actions. Display Brightness — Adjust the brightness of the screen. Auto-rotate screen — Allows you to set the orientation to automatically switch to landscape mode or portrait mode when you turn the phone sideways or upright. Animation — Allows you to set animated transitions when navigating from screen to screen. Screen timeout — Allows you to adjust the delay time before the screen automatically turns off. For the best battery performance, use the shortest convenient timeout. Display font - Change the display font. Gesture Adjust the gesture settings for text input field, home screen, alarm, music, Video player, incoming call, Gallery, List, Camera and Browser. Settings Location & security < My Location > Use wireless networks — If you select Use wireless networks, your phone will determine your approximate location using Wi—Fi and mobile networks. Use GPS Satellites — If you select Use GPS satellites, your phone will be determine your location to street— level accuracy. < Screen unlock> Set up screen lock — Set unlock pattern to secure your phone. Opens a set of screens that guide you through drawing a screen unlock pattern. You can set a PIN or Password instead of a Pattern, or leave it as None. TIP! To look your screen by using the Pattern Lock 1 The first time you do this, a short tutorial about creating an unlock pattern appears. 2 You are prompted to draw and redraw your own pattern. The next time you turn on your phone or wake up the screen, you will be prompted to draw your unlock pattern to unlock the screen. < SIM card lock > Set up SIM card lock — Set up SIM card lock or change SIM PIN. < Passwords > Visible passwords — Select to show passwords as you type them or deselect to hide passwords as you type them. < Device administration > Select device administrators — Add or remove device administrators. < Credential storage > Use secure credentials — Select to allow applications to access your phone’s encrypted store of secure certificates and related passwords and other credentials. You use credential storage to establish some kinds of VPN and Wi-Fi connections. If you have not set a password for credential storage, this setting is dimmed. Install from SD card — Allows you to install encrypted certificates from a microSD card. Set password — Allows you to set or change the password for your secure credential storage. Your password must have at least eight characters. Clear storage — Deletes all secure certificates and related credentials and erases the secure storage’s own password. Applications Unknown sources — Permits installation of applications that you obtain from websites, email or other locations other than Android Market. A WARNING To protect your phone and personal data, download applications only from trusted sources, such as Android Market. Manage applications — Manage and remove installed applications. Running services — Allows you to view and control currently running services and applications. This option displays what processes each running service needs and how much memory it is using. Development — Allows you to set options for application development, such as USB debugging, Stay awake and Allow mock locations. Settings Accounts & syncBackground data — Permits applications to synchronise data in the background, whether or not you are actively working in them. Un—selecting this setting can save battery power and lowers (but does not eliminate) data use. Auto-sync — Permits applications to synchronise, send and receive data on their own schedule. < Manage accounts > List of all Google accounts and other accounts you’ve added to your phone. If you touch an account in this screen, its account screen opens. Privacy < Backup and restore > Back up my data — Activate to back up your application data and settings. If you activate Automatic restore, it will restore backed up settings when you reinstall it. < Personal data > Factory data reset — Erases all of your personal data from internal phone storage, including information about your Google account, any other accounts, your system/application data and settings, any downloaded applications and your DRM licence. Resetting the phone does not erase any system software updates you have downloaded or any files on your microSD card, such as music or photos. If you reset the phone in this way, you are prompted to re—enter the same information as when you first started Android. SD card & phone storage < SD card > Check total space and available space. Touch Unmount SD card for safe removal. Format SD card, if you want to delete all data from the microSD card. You must unmount a microSD card before you can format it. < Internal phone storage > Check the Available space. Language & keyboard Use the Language & keyboard settings to select the language and region for the text on your phone and for configuring the onscreen keyboard, including words that you’ ve added to its dictionary. Voice input & output < Voice input > Voice recogniser settings — Use the Voice recogniser settings to configure the Android voice input feature. - Language: Opens a screen where you can set the language you use when entering text by speaking. . SafeSearch: Opens a dialog where you can set whether you want Google SafeSearch filter to block some results. - Block offensive words: When un—selected, Google voice recognition will recognise and transcribe words many people consider offensive, when you enter text by speaking. When selected, Google voice recognition replaces those words in transcriptions with a place holder comprised of hash symbols (if). < Voice output > Text-to-speech settings — Use the Text-to-speech settings to configure the Android text-to-speech synthesiser for applications that can take advantage of it. NOTE: If you don't have speech synthesiser data installed, only the Install voice data setting is available. . Listen to an example: Plays a brief sample of the speech synthesiser using your current settings. Wi-Fi With Wi—Fi, you can use high—speed Internet access within the coverage of the wireless access point (AP). You can enjoy wireless internet with Wi—Fi, without extra charges. Turn on Wi-Fi From the home screen, open the notification drawer and touch '§ on Or touch Application > Settings > Wireless & networks, then turn Wi-Fi on. To connect to Wi-Fi Choose Wi—Fi network you want to connect to. If you see a , you need to enter password to connect. Settings When your phone is sharing its data connection, an icon appears 'n the status bar and as an ongoing notification in the notifications drawer. Icon Description Portable Wi-Fi hotspot is active For the latest information about tetherirg and portable hotspots, 'ncludirg supported operating systems and other details, visit Littp://www.androidcom/tether. NOTE: Additional costs may be ‘ncurred when connecting and using online services. Check data charges with your network provider. Portable Wi-Fi hotspot settings On the home screen, touch the Applications tab and select Settings. Touch Wireless & networks and select Portable hotspot. Choose options that you want to adjust. Portable Wi-Fi hotspot — Check to share your phone’s mobile network data connection as a portable Wi—Fi hotspot. Help — Opens a dialog with information about portable Wi-Fi hotspots as well as information about where to learn more. To share your phone’ 3 data connection as a portable Wi-Fi hotspot 1 On the home screen, touch the Applications tab and select Settings. 2 Touch Wireless & networks and select Portable hotspot. 3 Check Portable Wi-Fi hotspot. - After a moment, the phone starts broadcasting its Wi—Fi network name (SSID), so you can connect to it with up to five computers or other devices. An ongoing notification ? is added to the status bar an notifications drawer. - When Portable Wi-Fi hotspot is selected, you can change its network name or secure it. 4 Unselect Portable Wi-Fi hotspot to stop sharing your data connection via Wi—Fi. To rename or secure your portable hotspot You can change the name of your phone’s Wi-Fi network name (SSID) and secure its Wi—Fi network. 1 On the home screen, touch the Applications tab and select Settings. 2 Touch Wireless & networks and select Tethering & portable hotspot. 3 Ensure Portable Wi-Fi hotspot is selected. 4 Touch Portable Wi-Fi hotspot settings. 5 Touch Configure Wi-Fi hotspot. . The Configure Wi-Fi hotspot dialog opens. . You can change the network SSID (name) that other computers see when scanning for Wi—Fi networks. . You can also touch the Security menu to configure the network with Wi—Fi Protected Access 2 (WPA2) security with a pre-shared key (PSK). . If you touch the WPA2 PSK security option, a password field is added to the Configure Wi-Fi hotspot dialog. If you enter a password, you will need to enter that password when you connect to the phone’s hotspot with a computer or other device. Or touch Open in the Security menu to remove security from your Wi—Fi network. Settings On-Screen Phone icons lfil Connects or disconnects your mobile phone to/from your PC. {91 Rotates the On—Screen Phone window (only available at applications that support rotation). mi Changes the On—Screen Phone preferences. E Exits the On—Screen Phone program. 2] Minimises the On-Screen Phone window. On-Screen Phone features . Real-time transfer and control: displays and controls your mobile phone screen when connected to your PC. . Mouse control: allows you to control your mobile phone by using the mouse to click and drag on your PC screen. - Text input with keyboard: allows you to compose a text message or note using your computer keyboard. - F'le transfer (mobile phone to PC): sends files from your mobile phone (eg. photos, videos, music and Polaris Office files) to your PC. S'mply right-click and drag to send a file to your PC. F Ie transfer (PC to mobile phone): sends files from your PC to your rrobile phone. Simply select the files you wish to transfer and drag and drop into the On-Screen Pwone window. The files you send are stored on a micro SD card. - Real—time event notifications: prompts a pop—up to inform you of any incoming calls or text/ multimedia messages, as well as alarm and event notifications. Notice: The Camera preview and Video are not supported in OSP, so it is not available on the PC. How to install On-Screen Phone on your PC Visit LG Home (http://wwvv.|g.com) and go to Support > Mobile Phone Support > Download LG Mobile Support Tool to PC. If you download LG PC Suite IV, the On-Screen Phone program will also be downloaded on your PC. Then you can install the On-Screen Phone on your PC. How to connect your mobile phone to your PC USB connection: 1 Open Connection Wizard, select "USB Cable connection“ and click "Next“. 2 Connect your mobile phone to the PC using a USB cable and click "Next". 3 Enter the On-Screen Phone password and click “Next". The default password is "0000". You can change the password in Settings > Wireless & Networks > On-Screen Phone Settings. 4 Click "OK" to exit the window. Wireless connection with Bluetooth: 1 On your mobile phone, go to Settings > Wireless & networks > Bluetooth settings. Select Turn on Bluetooth and select Discoverable. 2 If you have previously connected using a cable, run the New Connection Wizard to create a new connection. 3 Run the Connection Wizard on the computer, select "Bluetooth connection", then "Next". 4 The wizard starts searching for Bluetooth-enabled mobile phones. When the mobile phone that you wish to connect to appears, click “Stop" to stop searching. 5 Select "LG—P970h" from the device list and click "Next". You can rename the device it you wish. Settings 6 Enter the PIN code (e.g. "OOOO") and click “Next". 7 On your mobile phone, accept the request and enter the same PIN code, then touch "OK". 8 Enter the On—Screen Phone password and click "Next" (the default password is "OOOO"). 9 Touch "0K" to exit. To check the phone to PC connection Once the devices have been connected, drag down the notification bar at the top of the home screen to check the On—Screen Phone connection status. To disconnect your phone from your PC Click -¢ inthe top left of the On—S n Phone window. Or drag down the notification bar at the top of the home screen and select "On—Screen Phone". Touch "Yes" in the Disconnect window. NOTE: You must restart your phone after shutting clown the On-Screen Phone service. Copyrights and trademarks Rights to all technologies and products that comprise this device are the property of their respective owners: - Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. . microSD and the microSD logo are Trademarks of the SD Card Association. . Google Search, Maps, Gmail, YouTube, Talk and Market are trademarks of Google, Inc. . Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc. mm- ~ADOBE FLASH' PLAVER Contains Adobe® Flash® Player or Adobe® AIR® technology by Adobe Systems Incorporated. - DivX Mobile DIV}(. HD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEIVIAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 720p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under Iicence.Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Notice! Open Source Software To obtain the corresponding source code under GPL, LGPL, MPL and other open source licences, please visit http:// opensource.lge.com/ All referred licence terms, disclaimers and notices are available for download with the source code. - Wi—Fi® and Wi—Fi Protected Access ® are registered trademarks of the Wi-Fi Alliance. Wi-Fi DirectT’V| and Wi-Fi Protected SetupTM are trademarks of the Wi—Fi Alliance. - DEW Manufactured under ”””””” license from Dolby Laboratories. Dolby and the double—D symbol are trademarks of Dolby Laboratories.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : subinh.kim Create Date : 2011:02:23 09:17:28+09:00 Modify Date : 2011:03:31 11:52:16-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2011:03:31 11:52:16-04:00 Format : application/pdf Title : 2011022309171913741_LG-P970h_User Manual.pdf Creator : subinh.kim Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:f352bf2d-5f03-4653-ac55-64e0316f5855 Instance ID : uuid:45ce2f86-f87a-47de-8adf-38eebf274786 Page Count : 31EXIF Metadata provided by EXIF.tools