LG Electronics USA PA75UJE DLP PROJECTOR User Manual EMISSION TEST REPORT

LG Electronics USA DLP PROJECTOR EMISSION TEST REPORT

User Manual

Order Number : GETEC-C1-12-400 FCC Part 15 subpart B Test Report Number : GETEC-E3-12-150 Page 1 / 1 EUT Type: DLP PROJECTOR FCC ID.: BEJPA75UJE APPENDIX G : USER’S MANUAL
Owner's ManualDLP PROJECTORPA75UPlease read this manual carefully before operatingyour projector and retain it for future reference.www.lg.com
2LICENSESThis device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions.LICENSESSupported licenses may differ by model. For more information about licenses, visit www.lg.com.Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.ABOUT DIVX VIDEO: DivXr is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. . This is an official DivX Certifiedr device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifiedr device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. “DivX Certifiedr to play DivXr video up to HD 1080p, including premium content.”“DivXr, DivX Certifiedr and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. NOTEy Image shown may differ from your projector.y Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual.
3SAFETY INSTRUCTIONSRead these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Indoor Installation WARNINGy Do not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc. - This may cause a fire.y Do not place flammable materials such as aerosols near the projector. - This may cause a fire.y Do not allow your children to cling to or climb up to the projector. - The projector may fall down and cause personal injury or death.y Do not place the projector directly on a carpet, rug or place where ventila-tion is restricted such as a book shelf or closet. - This may cause the projector's in-ternal temperature to rise and cause a fire.y Do not place the projector close to sources of steam or oil such as a humidifier or kitchen counter. - This may cause a fire hazard or an electric shock.y Do not place the projector where it might be exposed to excessive dust. - This may cause a fire.SAFETY INSTRUCTIONSPlease take note of the safety instructions to prevent any potential accident or misuse of the projector.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.WARNING/CAUTION0 TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
4SAFETY INSTRUCTIONSy Do not use the projector in a damp place such as a bathroom where it is likely to get wet.- This may cause a fire or an electric shock.y Do not allow a tablecloth or curtain to block the vents. - This may cause the internal tem-perature of the projector to rise and cause a fire.y The distance between the projector and the wall should be more than 30 cm for ventilation purposes. - Otherwise, this may cause the inter-nal temperature of the projector to rise and cause a fire. CAUTIONy When installing the projector on a table, be careful not to place it near the edge. - The projector may fall causing injury to persons or damage to the projec-tor. Make sure that you use a stand suitable for the size of projector.y Turn off the projector, disconnect the power supply and remove all connec tions before moving the projector. - A damaged cord may cause a fire or an electric shock.y Do not install the projector on an unstable or vibrating surface such as a vibrating shelf or tilted surface. - It may fall and cause injury.y Be careful not to tip the projector over when connecting external devices to the projector. - This may cause injury to persons or damage to the projector.Power WARNINGy The earth wire should be connected. - Inappropriate earth grounding may cause damage to the projector or an electric shock when there is an electrical surge. If the projector must be installed at a place where earth grounding is not possible, purchase a circuit breaker and connect the projector to its wall outlet. Do not ground the projector to the gas pipe, water pipe, lightning rod, or telephone line, etc.y The power plug should be fully insert-ed into the wall outlet. - Unstable connection may cause a fire.y Do not place heavy objects on the power cord or place the cord under-neath the projector. - This may cause a fire or an electric shock.y Never touch the power plug with a wet hand. - This may cause an electric shock.y Do not connect too many devices to the same power extension. - Overheating may cause a fire.y Remove dust or contaminants around power plug pins or wall outlets. - This may cause a fire.y To turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation.
5SAFETY INSTRUCTIONS CAUTIONy Hold the plug firmly when unplug-ging. - A broken wire in the cord may cause a fire.y Ensure the power cord or plug is not damaged, modified, severely bent, twisted, pulled, sandwiched or heated. Do not use a loose wall outlet. - This may cause a fire or an electric shock.y Keep the power cord away from any heating devices. - The cord coating may melt and cause an electric shock.y Place the projector where people will not trip over or tread on the power cord or plug to protect the power cord and plug from any damage. - This may cause a fire hazard or an electric shock.y Do not turn the projector on or off by plugging in the power plug or un-plugging it from the wall outlet. (Do not use the power plug as a switch.) - This may cause an electric shock or damage to the projector.y Do not insert a conductor into the other side of the wall outlet while the power plug is inserted into the wall outlet. In addition, do not touch the power plug immediately after it is discon-nected from the wall outlet. - This may cause an electric shock.y Use only the official power cord which is provided by LG Electronics, Inc. Do not use other power cords. - This may cause a fire or an electric shock.When in Use WARNINGy Do not place anything containing liquid, such as a vase, flowerpot, cup, cosmetics, chemicals, decorations or candles, etc., on top of the projector. - Possible fire, electric shock, or fall-ing may cause physical injury.y In the event that there is a big im-pact to the projector or the cabinet is damaged, switch it off, unplug it from the wall outlet and contact an autho-rized service center. - Otherwise, this may cause a fire or an electric shock.y Do not insert pieces of metal such as coins, hairpins or metal debris, nor flammable materials such as paper or matches into the projector. - This may cause a fire or an electric shock.y In the event that liquid or a foreign object falls into the projector, please switch it off and unplug it from the wall outlet and contact an LG Elec-tronics Service Center. - Otherwise, this may cause a fire or an electric shock.y When replacing a battery of the re-mote control, make sure a child does not swallow the battery. Keep the bat-tery out of reach of children. - In the case of a battery being swal-lowed by a child, please consult a doctor immediately.y Do not remove any covers except for the lens cap. There is a high risk of electric shock.y Do not look directly into the lens
6SAFETY INSTRUCTIONSwhen the projector is in use. The strong light may damage your eyes.y When the lamp is on or has just been turned off, avoid touching the air vent or lamp because these will be very hot.y If there is a gas leak, do not touch the wall outlet. Open the window for ventilation. - A spark may cause a fire or burn.y Never touch the projector or power cord during thunder or lightning. - This may cause an electric shock.y Do not use the projector near an electronic device which generates a strong magnetic field.y Store the vinyl envelope used to pack the projector in a safe place away from children. - It could cause suffocation if used improperly.y Do not use 3D glasses if you do not watch 3D.y Do not keep your hand on the projec-tor for a long time when it is running.y When you play a game by connecting a game console to a projector, it is recommended that you maintain a distance of more than four times the diagonal length of the screen.y Make sure that the length of connecting cable is long enough. Otherwise, the product may fall causing personal injury or damage to the product. CAUTIONy Do not place a heavy object on the projector. - It may fall down and cause physical injury.y Be careful to prevent the lens from heavy impact during transportation.y Do not touch the lens. The lens may be damaged.y Do not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing.y In the event that no image appears on the screen, switch the projector off, unplug it from the wall outlet and contact an authorized service center. - Otherwise, this may cause a fire or an electric shock.y Do not drop an object onto the pro-jector or apply heavy pressure to it. - This may cause injury to persons or damage to the projector.y The distance between your eyes and the screen must be around 5 - 7 times the diagonal length of the screen. - If you watch the screen at a close distance for a long time, your eye sight may become worse.
7SAFETY INSTRUCTIONSCleaning WARNINGy Do not spray the projector with water when cleaning. Do not allow water to go into the projector or do not allow it to get wet. - This may cause a fire or an electric shock.y When there is smoke or a strange smell coming out from the projector or a foreign object falls into the pro-jector, please switch it off and unplug it from the power outlet and contact an LG Electronics Service Center. - If not, this may cause a fire or an electric shock.y Use an air spray or soft cloth or cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens. CAUTIONy Contact your seller or the Service Center once a year to clean the inter-nal parts of the projector. - If you do not clean the contaminat-ed interior of the projector for a long time, there may be a fire or damage to the projector.y When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. When cleaning the plastic parts, such as the projector case, do not use cleanser, automobile or industrial shiner, abrasive or wax, ben-zene, alcohol, etc., which can damage the product. - This can cause fire, electric shock or product damage (deformation, cor-rosion and damage).
8SAFETY INSTRUCTIONSOTHERS WARNINGy Only a qualified technician can disas-semble or modify the projector. For inspection, adjustment, or repair, con-tact your seller or the Service Center. - Otherwise, this may cause a fire or an electric shock.y Dispose of the used battery properly. - Otherwise, this may result in explosion or fire.y The correct method of disposal may vary depending on your country or region. Dispose of the battery pack according to the appropriate instructions.y Do not throw or disassemble the battery. - Otherwise, this may result in fire or explosion due to damage to the battery.y Always use batteries approved and certified by LG Electronics. - Otherwise, this may result in fire or explosion.y Store the battery away from metallic objects, such as keys and paper clips.y Excess current may cause a rapid increase in temperature, resulting in fire or burns.y Do not store the battery near any heat source, such as a heater. - This may result in fire or damage the product.y Do not store it at temperatures higher than 60 °C or in high humidity.y Keep the battery out of reach of chil-dren. - This may result in personal injury or damage to the product.y Make sure that the battery is installed correctly.y Incorrect battery replacement may cause fire. CAUTIONy Unplug the power cord if the projec-tor is not used for a long period. - Accumulated dust may cause overheating, an electric shock from corroded insulation and a fire from an electrical surge.y Only use the specified type of battery. - Otherwise, this may cause an elec-tric shock caused by overheating and leakage.
9SAFETY INSTRUCTIONSANTENNAOutdoor Antenna Groundingy If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70Antenna Lead in WireGrounding Conductor (NEC Section 810-21,Antenna Discharge Unit (NEC Section 810-20)Power Service GroundingElectrode System (NEC Art 250, Part H)NEC: National Electrical CodeGround ClampElectric Service EquipmentGround ClampFCC NOTICEWarning - Class B(b) For a Class B Digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
10 SAFETY INSTRUCTIONSDisposal of your old appliance1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.2. All electrical and electronic products should be disposed of separately from the municipal waste stream through designated collection facilities appointed by your government or your local authorities.3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.Disposal of waste batteries/accumulators1. When this crossed-out wheeled bin symbol is attached to batteries/accumulators of Your product it means they are covered by European Directive 2006/66/EC.2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005 % of mercury, 0.002 % of cadmium or 0.004 % of lead.3. All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.4. The correct disposal of Your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health.5. For more detailed information about disposal of Your old batteries/accumulators, please contact Your city office, waste disposal service or the shop where You purchased the product.For USANOTE TO CABLE/TV INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820 - 40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
11Contents ENTERTAINMENT 28MY MEDIA 28 Connecting USB Storage Devices 28 MOVIE LIST 30 PHOTO LIST 36 MUSIC LIST 38 FILE LIST 403D FUNCTION 42Before Watching 3D 42 While Watching 3D 42Requirements for Watching 3D Images 44 To Use DLP-LINK (DLP-Ready) Type Glasses 46Watching 3D Images 46CUSTOMIZING SETTINGS 47SETUP Menu 47PICTURE Settings 48AUDIO Settings 51CHANNEL Settings 52TIME Settings 53LOCK Settings 54OPTION Settings 56MAKING CONNECTIONS 59Connecting to an HD Receiver, DVD, or VCR Player 60 HDMI Connection 60Connecting to a PC 60 RGB Connection 60Connecting to the AV INPUT 61 Component Connection 62Connecting to Headphones 62LICENSES 2SAFETY INSTRUCTIONS 3PREPARATION 13Accessories 13Optional Extras 14Parts and Components 15Installation 16 Installation Precautions 16 Projection Distance per Screen Size 17 How to Install the Projector Using a Tripod 18 Kensington Security System 18REMOTE CONTROL 19USING THE PROJECTOR 21Connecting to an Antenna or Cable 21 Connecting an Antenna or Basic Cable 21 Connecting a Cable Box 21Watching Projector 22 Turning on the Projector 22 Focus and Position of the Screen Image 22 Watching Projector 22Managing Channels 23 Setting Up Channels 23Using Additional Options 25 Adjusting Aspect Ratio 25 Using the Keystone Function 26 Using the Input List 26 Blank Function 27Using the Quick Menu 27Contents
12 Contents MAINTENANCE 63Cleaning the Projector 63 Cleaning the Lens 63 Cleaning the Projector Case 63SPECIFICATIONS 64
13PREPARATIONPREPARATIONAccessoriesCheck enclosed accessories.The picture may be different from an actual product.y When connecting a cable to the HDMI or USB port, it may not be connected properly if the size of jack to the USB/HDMI port is too big. Use a standard sized jack.Remote Control Coin battery(CR 2032)Owner's Manual CD Owner's manual Computer Cable Composite Gender AC-DC AdaptorPower Cord Pouch
14 PREPARATIONOptional ExtrasTo purchase optional extras, visit an electronics store or online shopping site or contact the retail store where you purchased the product.Without prior notice, optional extras are subject to change in order to improve the per-formance of the product, and new accessories may be added.Screen for Projector Tripod HDMI CableVideo Cable Audio Cable3D glasses (DLP-LINK or DLP-Ready Type)RGB to Component cable Component Cable RF cable
15PREPARATIONParts and Components* The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. When powered on, the LED of the control panel turns on.SpeakerFocus ringLens2Button Description(Power) Turns the projector on or off.(Menu) Selects or closes menus.∧, ∨, ＜, ＞ Sets the function or moves the cursor.ᯙ(OK) Checks present mode and saves function changes.1 Due to the high temperature air coming out of the vents, do not get close to the vents.2 Do not touch the lens when using the projector. The lens may be damaged.Control PanelBackSpeakerVent1$9,1'&,1$17(11$,15*%,1HVOL -VOL +CHCH
16 PREPARATIONInstallationInstallation Precautionsy Place the projector in a well-ventilat-ed environment.- To prevent internal heat from build-ing up, install the projector in a well-ventilated place. Do not place anything near the pro-jector as this may block its air vents. If the air vents are blocked, the inter-nal temperature will increase.- Do not place the projector on a car-pet or rug. If a projector model has its inlet vent on its bottom, do not block the vent and use the projector on a leveled solid surface.- Be sure to prevent foreign objects such as paper debris from entering the projector.- Leave an adequate distance (30 cm or more) around the projector.y Do not place the projector in a hot or humid environment. - Do not place the projector in a hot, cold, or humid environment. (See64 Page regarding operating temperature and humidity.) y Do not place the projector in a place where it will easily attract dust. - This may cause a fire.y Do not remove any covers except for the lens cap. There is a high risk of electric shock.y The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction.y The remote control may not work in an environment where a lamp equipped with electronic ballasts or a three-wavelength fluorescent lamp is installed. Replace the lamp with an internationally standardized lamp for the remote control to work normally.
17PREPARATIONProjection Distance per Screen Size1 Place the projector on a sturdy, level surface, together with the PC or audio/video source.2 Place the projector at an appropriate distance from the screen. The distance be-tween the projector and the screen determines the actual size of the image.3 Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the image on the screen will be tilted and the image quality will be poor. If the screen image is crooked, use the Keystone function.(see page 26)4 Connect the power cords of the projector and the connected devices to the wall outlet.Ratio of upward projection: 100 %16:10 ScreenScreen Size (mm)Screen Width (Y) (mm)Screen Height (X) (mm)Projection Distance (D) (mm)635 538 337 803 762 646 404 966 889 754 471 1130 1016 861 539 1293 1143 969 606 1456 1270 1077 673 1619 1397 1185 741 1783 1524 1292 808 1946 1651 1400 875 2109 1778 1508 943 2272 1905 1615 1010 2436 2032 1723 1077 2599 2159 1831 1145 2762 2286 1938 1212 2925 2413 2046 1279 3089 2540 2154 1347 3252 Screen Height (X)[25[25Screen Width (Y)\25\25DISPLAYProjection distance (D)Projection distance (D)DISPLAY30 mm
18 PREPARATIONKensington Security Systemy This projector has a Kensington Security System Connector on the panel. Connect a Kensington Security System cable as below.y For detailed installation and use of the Kensington Security System, refer to the user’s guide included with the Kensington Security System set.y The Kensington Security System is an optional item.y What is Kensington? Kensington is a company that sells security systems that prevent expensive elec-tronic equipment such as a computer or laptop from being stolen. Internet Homepage: http://www.kensington.comHow to Install the Projector Using a Tripody You can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod.y When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may damage the projector.)+سThe projector is connected to this part.TripodBolt used to fix the projectorBottom side of the projector
19REMOTE CONTROLREMOTE CONTROLOpen the battery cover on the back of the remote control and insert the specified batteries as per instructions . The same type of batteries must be used.POWERTurns the projector on or off.INPUTChanges the input source.MUTEMutes all sounds.VOL +, -Adjusts the volume level.CH 󱛨, 󱛩Changes the channel or page..INFOViews the information of the current program and screen.BLANKTurns the projector screen on or off.Up/Down/Left/Right ButtonsSets the function or moves the cursor.OK ᯙChecks present mode and saves function changes..MARKAllows you to select optional functions.FAVAccesses your favorite channel list.廵Returns to the previous level.SETTINGSSelects or closes menus.Q.MENUAccesses the quick menu.①②
20 REMOTE CONTROL NOTEy When using the remote control, the optimal remote range is less than 3 meters (left/right) and within a 30 degree arc of the IR receiver.y For seamless operation, do not block the IR receiver.y When you carry the remote control in the portable bag, make sure that the buttons on the remote control are not pressed by the projector, cables, documents or any other accessories in the bag. Otherwise, it may significantly reduce the battery life.Alphanumeric buttonsEnters letters and numbers.Playback Control ButtonsControls playback of USB mode.LISTAccesses the saved channel list.- (Dash)Inserts a dash between numbers such as 2 - 1 and 2 - 2.FLASHBKTunes to the last channel viewed.3DShows 3D images.L/R Switches left and right in 3D mode.Color buttonsAccess special functions in some menus.$9,1'&,1$17(11$,15*%,1HVOL -VOL +CHCH63䮋#63䮋
21Using the PROJECTORUsing the PROJECTORConnecting to an Antenna or CableConnect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional.Connecting an Antenna or Basic CableConnect the projector to a wall antenna socket with an RF cable (75 Ω). NOTEy Use a signal splitter to use more than 2 projectors.y Visit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna.Connecting a Cable BoxConnect the projector to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 Ω).#CAUTIONy Make sure not to bend the copper wire of the RF cable.Copper wire Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your projector.
22 Using the PROJECTORWatching ProjectorTurning on the Projector1 Connect the power cord correctly.2 After waiting for a moment, press the POWER button on the remote control or the control panel. (The light on the control panel will be turned on.)3 In the Language Selection screen, select a language.4 Select an input signal by using the INPUT button on the remote control.Focus and Position of the Screen ImageWhen an image appears on the screen, check if it is in focus and fits the screen properly. Focus ringy To adjust the focus of the image, rotate the focus ring.Watching Projector1 In Standby mode, press the POWER button to turn the projector on.2 Press the INPUT button and select the input signal you want.3 Control the projector using the fol-lowing buttons while watching projec-tor.Button DescriptionCH 󱛨, 󱛩 Scrolls through saved channels.LIST Selects a channel on the saved or recent watched channel list.0 - 9 Selects a channel by entering numbers.VOL -, + Adjusts the volume level.MUTE Mutes all sounds.Q.MENU Accesses the quick menu. (see page 27)FLASHBK Alternates betweenthe last two channelsselected.4 To turn the projector off, press the POWER button.
23Using the PROJECTORManaging ChannelsSetting Up ChannelsStoring ChannelsTo store channels automatically,1 Press MENU to access the menu.2 Press the Navigation buttons to scroll to CHANNEL and press OK.3 Press the Navigation buttons to scroll to Auto Tuning and press OK.4 Select Start to start automatic tuning. The projector scans and saves available channels automatically.5 When you are finished, press SETTINGS.To store channels manually,1 Press MENU to access the menu.2 Press the Navigation buttons to scroll to CHANNEL and press OK.3 Press the Navigation buttons to scroll to Manual Tuning and press OK.4 Scroll through the channel types, and then add or delete channels.5 When you are finished, press SETTINGS.#NOTEy If the projector scans a blocked channel, you will be prompted to enter your password to keep the channel scanned.y You can store up to 1000 channels. The number of channels that you can store differs depending on the broadcasting signal environment.y The channels are stored in the order of DTV, TV, Cable DTV and Cable TV.
24 Using the PROJECTOREditing Your Channel List1 Press MENU to access the menu.2 Press the Navigation buttons to scroll to CHANNEL and press OK.3 Press the Navigation buttons to scroll to Channel Edit and press OK.4 Edit channels using the following buttons.&KDQQHO(GLW )DYRULWH*URXS $3DJH  '79 79 &DEOH'79 &DEOH79ᯙ&K&KDQJHᯒ1DYLJDWLRQ᱆)DYRULWH&K᱇3DJH&KDQJHᱭ)DYRULWH&K*URXSᯕ%ORFN8QEORFNᰳ3URYLRXVᯕ$GG'HOHWHButton DescriptionOK Selects the highlighted channel to view.∧, ∨, ＜, ＞ Scrolls through channel types or channels.FAV Adds a favorite channel list.CH Moves to the previous or next page.Q.MENU Changes the favorite group.Yellow Block or unblock a channel.Blue Adds or deletes a channel. The deleted channel displays in blue.5 When you are finished, press SETTINGS.Favorite Channel Setup1 Press CH or Number buttons to access to select your desired channel.2 Press FAV. to access the Favorite List.3 Press the 󱛦/#󱛧#buttons to scrolls through channel group.4 Press the Yellow button.Favorite Channel List1 Press FAV. to access the Favorite List.2 Press the Navigation buttons to scroll to a channel.and press OK.)DYRULWH/LVW ᰳ([LWᯑ)DYRULWH&K*URXS܁*URXS $۽᯦᯦ᯕ&K5HJ ᯕ&K(GLWᯱᯙButton Description∧, ∨ Scrolls through channels.＜, ＞ Scrolls through channel group.CH Moves to the previous or next pageYellow Register or cancel the current channel in favorite channel list.Blue Go to the “CHANNEL menu - Channel Edit”.
25Using the PROJECTORUsing Additional OptionsAdjusting Aspect RatioYou can also change the image size by pressing Q.MENU or SETTINGS. NOTEy Some options may not be available depending on input signals.- FULL: Changes to the full screen regardless of the aspect ratio.- 16:9: Resizes images to fit the screen width.- Just Scan: Displays video images in the original size without cutting off the edges. NOTEy If you select Just Scan, you may see image noises at the edge or edges of the screen.- Set By Program: Displays images in the same aspect ratio as the original image.- 4:3: Resizes images to the 4:3 aspect ratio.- Zoom: Enlarges an image to fit the screen width. The top and bottom of the image may be truncated.y Press the 󱛦 or 󱛧 button to zoom in or out of the image.y Press the 󱛨 or 󱛩 button to move the image.- Cinema Zoom: Formats an image to the cinemascope ratio, 2.35:1. It ranges from 1 to 16.y Press the 󱛦 or 󱛧 button to zoom in or out of the image.y Press the 󱛨 or 󱛩 button to move the image. NOTEy If you enlarge or reduce an image, the image may be distorted.
26 Using the PROJECTORUsing the Keystone FunctionTo prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen.Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector at an optimal angle. ؒ.H\VWRQH  ܁  ۽ᯙ2.1 Press the SETTINGS button.2 Press the 󱛨, 󱛩, 󱛦 or 󱛧 button to select OPTION and press the OK button.3 Press the 󱛨, 󱛩, 󱛦 or 󱛧 button to select Keystone and press the OK button.4 Press the 󱛦 or 󱛧 button to adjusted Keystone.y Keystone can be adjusted from -40 to 40.5 Press the OK button after adjustment.Using the Input ListUsing the Input List1 Press the INPUT button to access the input sources.- The connected input mode appears first. However, AV / Component input is always activated. ,1387 ᯒ0RYHᯙ2.([LW,QSXW/DEHO2 Select an input signal using the INPUT button and the projector is switched only to the connected input mode. You can use the 󱛨, 󱛩, 󱛦 or 󱛧 button to switch between all the input modes.Adding an Input LabelDisplays which devices are connected to which input ports. ,QSXW/DEHO,1387 ܁۽&RPSRQHQW ܁۽5*%3& ܁۽+'0, ܁۽&ORVH1 Press the INPUT button to access the input sources.2 Press the BLUE button.3 Use the 󱛨 or 󱛩 button to scroll to one of the input sources.4 Use the 󱛦 or 󱛧 button to select one of the input labels.79 $9 5*%3& 86% &RPSRQHQW +'0,
27Using the PROJECTORBlank FunctionUsing the Blank FunctionThis function may be effective when you need to draw attention during a meeting or training.1 Press the BLANK button, and the screen is covered by the background color. You can change the background color by referring to "Selecting a Blank Image".2 Press any button to clear the blank function.To cover the screen temporarily, press the BLANK button on the remote control. Do not block the lens with any object while the projector is running. It may become overheated and de-formed or even cause a fire.Selecting a Blank Image1 Press the SETTINGS button.2 Press the 󱛨, 󱛩, 󱛦 or 󱛧 button to select OPTION and press the OK button.3 Press the 󱛨, 󱛩, 󱛦 or 󱛧 button to select Blank Image and press the OK button.4 Use the 󱛨, 󱛩 button to move to the setting or option you want and press the OK button.Using the Quick MenuYou can customize frequently used menus.1 Press Q.MENU to access the quick menus.2 Press the 󱛦 or 󱛧 button to scroll through the following menus and press OK.Menu DescriptionAspect RatioResizes an image. (see page 25)PJT Mode Turns the projected image upside down or flips it horizontally.Picture ModeChanges the picture mode. (see page 48)Multi AudioChanges the audio language (Digital signal)SAP Changes the MTS sound (Analog signal)Sleep TimerThe projector is turned off at the preset time.Clear Voice IIMakes the voice from the projector crisp and clear.Del/Add Edits the channels to add or delete the channel.USB DeviceEject a USB device. The menu is displayed only when the USB device is connected.3 Press the 󱛨, 󱛩, 󱛦, or 󱛧 button to scroll through the following menus.
28 ENTERTAINMENTENTERTAINMENTMY MEDIAConnecting USB Storage DevicesConnect a USB memory stick as shown below.When a USB storage device is connect-ed, the USB adjustment screen appears. You cannot write or delete data on the USB storage device. USB memory stickTo disconnect the USB storage device,1 Press the Q.MENU button.2 Use the 󱛦 or 󱛧 button to move to USB Device and press the OK button.3 Remove the USB device. NOTEy After the USB storage device is disconnected, it cannot be read. Remove the USB storage device and connect it again.
29ENTERTAINMENTTips for Using USB Devicesy Only a USB storage device is recog-nizable.y USB hubs are not supported.y A USB storage device which uses its own driver may not be recognized.y The recognition speed of a USB storage device will depend on each device.y If a normal USB device does not work, disconnect and reconnect it. Please do not turn off the projector or unplug the USB device when the connected USB device is working. The USB device or stored files may be damaged.y Please do not connect the USB stor-age device that has been manipu-lated on the PC. The projector may not operate properly or fail to play files. Use a USB storage device which contains normal music, photo, video, or document files.y Please only use a USB storage device formatted as a FAT16, FAT32, or NTFS file system provided by Win-dows. In case a storage device for-matted as a different utility program is not supported by Windows, it may not be recognized.y Please connect power to a USB stor-age device which requires an external power supply. If not, the device may not be recognized.y Please connect a USB storage device with a cable provided by the USB manufacturer. When you use a cable that is not provided by a USB manu-facturer or an excessively long cable, the device may not be recognized.y Some USB devices may not be sup-ported or will not work properly.y If the length of a folder or file is too long, the folder or file may not be recognized properly.y The files in a USB storage device are sorted in the same way as Windows XP. Up to 100 English characters for a file name are allowed.y The data of a USB device may be damaged, so it is recommended to backup any important files. Because a user is responsible for data man-agement, the manufacturer is not responsible.y It is recommended to use a USB memory stick which is 32 GB or less and a USB hard disk which is 1 TB or less. Any device with more than the recommended capacity may not work properly.y If a USB storage device is not working properly, disconnect it and connect it again.y If a USB external hard disk with the power saving function does not work, turn the hard disk off and on again to make it work properly.y USB storage devices below USB 2.0 are supported as well. However, they may not work properly in the movie list.
30 ENTERTAINMENTMOVIE LISTIn the Movie List, you can watch movies stored on the connected USB device.Tips for Playing Video Filesy Some subtitles created by a user may not work.y Some special characters are not sup-ported in subtitles.y HTML tags are not supported in sub-titles.y Time information in a subtitle file should be arranged in ascending order to play the subtitle properly.y Changing font and color in subtitles is not supported.y A language which is not specified in the subtitle languages is not supported. (see page 34)y Subtitle files of 1 MB or larger are not supported.y The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio lan-guage is changed.y A damaged video file may not be played properly, or some functions may not be available.y Video files created with some encod-ers may not be played properly.y Either audio or video may only be supported depending on the video or audio packet structure of a video file.y Video files with higher resolution than the maximum supported for each frame may not be played properly.y Video files in formats other than the ones specified above may not be played properly.y Streaming files which include GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation) is not supported.y Up to 10,000 sync blocks are sup-ported in the subtitle file.y Seamless playback is not guaranteed for files encoded level 4.1 or higher in H.264/AVC.y DTS audio codec is not supported.y Video files larger than 30 GB (Giga-bytes) are not supported.y Playing a video via a USB connection that does not support high speed may not work properly.y A video file and its subtitle file must be located in the same folder. A video file name and its subtitle file name must be identical in order to display the subtitle properly.y While watching a video using the movie list function, you cannot adjust the picture mode.y Trick Mode does not support other functions than ᰩif video files do not have index information.y When playing a video file using net-work, the Trick mode is limited to 2X speed.y Video file names that contain special characters may not be playable.
31ENTERTAINMENTSupported Video FormatsFile ExtensionsAudio/Video Codec Profile/Level Support.asf.wmvVideoVC-1 Advanced ProfileAdvanced Profile @ Level 3 (e.g.720p60, 1080i60, 1080p30)Only streams compliant to SMPTE 421M VC-1 standard are supported.VC-1 Simpleand Main ProfilesSimple Profile @ Medium Level (e.g.CIF,QVGA)Main Profile @ High Level (e.g.1080p30)Only streams compliant to SMPTE 421M VC-1 standard are supported.Audio WMA StandardWMA 9 Professional.divx.aviVideoDivx3.11Divx4Divx5Divx6Advanced Simple Profile(720p/ 1080i)XViD Advanced Simple Profile(720p/ 1080i)AudioMPEG-1 Layer I,IIMPEG-1 Layer III (MP3)Dolby DigitalWMA StandardWMA 9 ProfessionalDTS Korea only.mp4.m4vVideo H.264 /AVC Main Profile @Level 4.1High Profile @Level 4.1 (e.g.720p60, 1080i60, 1080p30)MPEG-4 Part 2 Advanced Simple Profile(720p/ 1080i)Audio HE-AAC HE-AAC-LC and HE-AAC.mkvVideo H.264 /AVC Main Profile @Level 4.1High Profile @Level 4.1 (e.g.720p60, 1080i60, 1080p30)AudioHE-AAC HE-AAC-LC and HE-AACDolby DigitalDTS Korea only.ts.trp.tpVideo H.264 /AVC Main Profile @Level 4.1High Profile @Level 4.1 (e.g.720p60, 1080i60, 1080p30)MPEG-2 Main Profile @High Level (e.g.720p60, 1080i60)AudioMPEG-1 Layer I,IIMPEG-1 Layer III (MP3)Dolby DigitalHE-AAC HE-AAC-LC and HE-AAC.vobVideo MPEG-1MPEG-2 Main Profile @High Level (e.g.720p60, 1080i60)AudioDolby DigitalLPCMMPEG-1 Layer I,II.mpg.mpeg.mpeVideo MPEG-1Audio MPEG-1 Layer I,II Only streams compliant configured properly for TS, PS or ES
32 ENTERTAINMENTSupported Audio FilesNo Audio Codec Bit rate Sampling rateRemark1 MP3 32 kbps - 320 kbps 32 kHz - 48 kHzDTS Audio codec is Korea only.2 AC3 32 kbps - 640 kbps 32 kHz, 44.1 kHz, 48 kHz3 MPEG 32 kbps - 448 kbps 32 kHz - 48 kHz4 AAC,HEAAC 24 kbps - 3844 kbps 8 kHz - 96 kHz5 CDDA 1.44 kbps 44.1 kHz6 LPCM 1.41 Mbps - 9.6 MbpsMulti-channel : 44.1 kHz, 88.2 kHz/ 48 kHz, 96 kHz Stereo : 176.4 kHz, 192 kHz
33ENTERTAINMENTBrowsing Movie ListPlay a video file stored in the connected device.1 Connect a USB storage device.2 Press the SETTINGS button.3 Accesses the MY MEDIA.4 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select Movie List and press the OK button.5 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select the file you want and press the OK button. 0RYLH/LVW86%6725$*('(9,&(#########%XWWHUIO\BGERRN GRF SLF YLGᯕ*RWRURRWIROGHU ᯕ*RWRXSSHUIROGHUᰳ([LW3DJH3DJH᱇3DJH&KDQJH❹❶❺❷❻❼❽❸Description❶ThumbnailsAbnormal fileFile not supported❷File List❸Moves to the upper level folder.❹Current page/Total no. of folder pages❺Current page/Total no. of file pages❻Moves to the top level folder.❼Moves to the upper level folder.❽Exit Movie List.6 Control playback by using the follow-ing buttons.ᯚᯛ2SWLRQ +LGH ([LWSetting Description◀▶ Shows the current playing position. Use ＜, ＞ buttons to move forward or backward.ᰧStops playing and returns to Movie List.ᰦReturns to normal playback.ᰨPauses the media player.If no button is pressed on the remote control for 10 minutes after pausing, the playback is restarted.ᰨᰩDisplays in slow motion.ᰞWhenever this button is pressed, the playback speed is changed. : x2, x4, x8, x16, x32You can use the Energy Sav-ing mode.Option A pop-up window will appear.+LGH Hides the playback bar. Press the OK button to make it appear.([LWReturns to the Movie List screen.
34 ENTERTAINMENTOptions for Movie List1 Press the Q.MENU button.2 Use the 󱛨 or 󱛩 button to move to a desired option and press the OK button. 3 Use 󱛨, 󱛩, 󱛦 or 󱛧 button to set up each item.Set Video PlaySetting DescriptionPicture SizeSelects the size of a playback screen.y Full: Files are played in full screen mode accord-ing to the aspect ratio of video.y 16:9: Displays the video with the aspect ratio of 16:9.y Just Scan: Displays the video in the original as-pect ratio. Audio Lan-guageAllows you to select the lan-guage you want for the file with multiple audio tracks. This option is not available if the file has only one audio track.Subtitle Lan-guageThe subtitle can be turned on or off.y Language: One of any of the available languages can be selected.y Code Page: A character set used for a subtitle can be selected. By default, the subtitle is displayed in a language configured in OPTION ނ Menu Language.Setting DescriptionSubtitle Lan-guagey Speed: If a subtitle is not synchronized with its video, you can adjust its speed at 0.5 sec unit.y Position: Moves the loca-tion of a subtitle.y Size: Changes the sub-title font size.RepeatTurns the repeat function on or off.When it is set to off, the next file can be played sequentially if the file name is similar.y Subtitle LanguageSubtitle Lan-guageLanguageLatin1 English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan, ValencianKorean KoreanPICTURE SettingsYou can change video settings.(Refer to "PICTURE Settings" on page 48.)AUDIO SettingsYou can change audio settings.(Refer to "AUDIO Settings" on page 51.)
35ENTERTAINMENTRegistering the DivX codePlease check your DivX code. For more information on the registration process, visit www.divx.com/vod. After registra-tion, your can enjoy DivX VOD content protected by the DivX DRM code.1 Press SETTINGS button to enter Setup menu.2 Move to OPTION and press DivX(R) VOD.5HJLVWUDWLRQ'HUHJLVWUDWLRQ&ORVH3 Press the 󱛨 or 󱛩 button to move to Registration and press the OK but-ton.&ORVH<RXPXVWUHJLVWHU\RXUGHYLFHWRSOD\'LY;5SURWHFWHGYLGHRV5HJLVWUDWLRQ&RGH;;;;;;;;;;5HJLVWHUDWKWWSYRGGLY[FRPL4 Check the DivX registration code. NOTEy You cannot use DivX registration codes assigned to other devices. Make sure to use the DivX registra-tion code assigned to your device.y The video or audio files that are not converted by the standard DivX codec may be corrupted or not be played.To deregister the DivX codeUse the DivX deregistration code to deactivate the DivX DRM function.1 Press SETTINGS button to enter Setup menu.2 Move to OPTION and press DivX(R) VOD.3 Use the 󱛨 or 󱛩 button to go to Deregistration and press the OK button.<HV 1R<RXUGHYLFHLVDOUHDG\UHJLVWHUHG$UH\RXVXUH\RXZLVKWRGHUHJLVWHU" ➡<HV 1R'HUHJLVWUDWLRQFRGH'HUHJLVWHUDWKWWSYRGGLY[FRP&RQWLQXHZLWKUHJLVWUDWLRQ"L4 Select Yes . NOTEy What is DRM [Digital Rights Management]? This is a technology and service that prevents the illegal use of digital contents to protect the benefits and rights of the copyright owner. Files can be played after the license is veri-fied through an online method, etc.
36 ENTERTAINMENTPHOTO LISTYou can see the photos stored on a con-nected device.Supported Photo FilesPHOTO (*.JPEG)Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x 8640-pixel (height)Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x 1440-pix-el (height)y Only JPEG files are supported.y Non-supported files are displayed in the form of an icon.y An error message is displayed for corrupted files or file formats that cannot be played.y Corrupted files may not be displayed properly.y It may take some time to view high-resolution images in full screen.Browsing Photo List1 Connect a USB storage device.2 Press the SETTINGS button.3 Accesses the MY MEDIA.4 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select Photo List and press the OK button.5 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select the file you want and press the OK button. 3KRWR/LVW86%6725$*('(9,&(#########%XWWHUIO\BGERRN GRF SLF YLGᯕ*RWRURRWIROGHU ᯕ*RWRXSSHUIROGHUᰳ([LW3DJH3DJH᱇3DJH&KDQJH❹❶❺❷❻❼❽❸Description❶ThumbnailsAbnormal fileFile not supported❷File List❸Moves to the upper level folder.❹Current page/Total no. of folder pages❺Current page/Total no. of file pages❻Moves to the top level folder.❼Moves to the upper level folder.❽Exit
37ENTERTAINMENT6 Control playback by using the follow-ing buttons. BDMSJ[.%>@2SWLRQ6OLGHVKRZ %*0 +LGH ([LWSetting DescriptionSelects the previous or next photo.Slide-showAll photos are displayed during slide show.y Set the time interval of the slide show in Option ނ Set Photo View menu.BGM You can listen to music while viewing photos in full size.y Set the BGM in Option ނ Set Photo View menu.ᱨRotates photos.y Rotates a photo 90°, 180°, 270°, 360° clock-wise.y Photos cannot be rotated if their width is greater than the height of the max. supported resolu-tion.᯶You can move between screens using the navigation buttons.Press the blue button to enlarge the image.You can use the Energy Sav-ing mode.Option A pop-up window will ap-pear.Setting DescriptionHide Hides the menu on the full size screen.y To see the menu, press the OK button on the remote control.Exit Exit from full screen photo view.
38 ENTERTAINMENTOptions for Photo List1 Press the Q.MENU button.2 Use the 󱛨 or 󱛩 button to move to a desired option and press the OK but-ton. 3 Use 󱛨, 󱛩, 󱛦 or 󱛧 button to set up each item.Set Photo ViewSetting DescriptionSlide speedSelects a slideshow speed.BGM (Back-ground Music)Selects a music folder for the background music.y You cannot change the music folder while the background music is playing.y For background music, only the folder from the same device can be se-lected.PICTURE SettingsYou can change video settings.(Refer to "PICTURE Settings" on page 48.)AUDIO SettingsYou can change audio settings.(Refer to "AUDIO Settings" on page 51.)MUSIC LISTYou can play audio files stored on the connected device.Supported Music Files*.MP3Bit rate range 32 Kbps - 320 Kbpsy Sampling rate MPEG 1 Layer 3: 32 kHz, 44.1 kHz, 48 kHzy Sampling rate MPEG 2 Layer 3: 16 kHz, 22.05 kHz, 24 kHzBrowsing Music List1 Connect a USB storage device.2 Press the SETTINGS button.3 Accesses the MY MEDIA.4 Use the 󱛨, 󱛩, 󱛦, 󱛧 button to select Music List and press the OK button.5 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select the file you want and press the OK button. 0XVLF/LVW86%6725$*('(9,&(#########%XWWHUIO\BG'ULYHᯕ*RWRURRWIROGHU ᯕ*RWRXSSHUIROGHUᰳ([LW3DJH3DJH᱇3DJH&KDQJH❹❶❺❷❻❼❽❸
39ENTERTAINMENTSetting Description+LGH Hides the playback bar.y Press the OK button to make the playback bar appear.([LW Returns to the Music List screen.Options for Music List1 Press the Q.MENU button.2 Use the 󱛨 or 󱛩 button to move to a desired option and press the OK but-ton. 3 Use 󱛨, 󱛩, 󱛦 or 󱛧 button to set up each item.Set Audio PlaySetting DescriptionRepeat Selects repeat play.Random Selects random play.AUDIO SettingsYou can change audio settings.(Refer to "AUDIO Settings" on page 51.)Description❶ThumbnailsAbnormal fileFile not supported❷File List❸Moves to the upper level folder.❹Current page/Total no. of folder pages❺Current page/Total no. of file pages❻Moves to the top level folder.❼Moves to the upper level folder.❽Exit6 Control playback by using the follow-ing buttons. 0XVLF/LVW86%6725$*('(9,&(#########%XWWHUIO\BG'ULYH3DJH3DJH᱇3DJH&KDQJHᰦ%PSᯚᯛ2SWLRQ +LGH ([LWSetting Description◀▶ Changes the playing position.ᰧStops playing.ᰦReturns to normal playback.ᰨPauses the media player.ᰞPlays the previous/next file.You can use the Energy Sav-ing mode.2SWLRQ Sets up the options of Music List.
40 ENTERTAINMENTFILE LISTYou can see document files stored on a connected device.Supported File FormatsXLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF, Microsoft Office 97/ 2000/ 2002/ 2003/ 2007 Adobe PDF 1.0/ 1.1/ 1.2/ 1.3/ 1.4y File Viewer realigns a document, so it may look different from what is displayed on a PC.y For documents that include images, the resolution may look lower during the realigning process.y If the document volume is big or it has many pages, it may take longer to load the document.y Unsupported fonts may be replaced by other fonts.Browsing File List1 Connect a USB storage device.2 Press the SETTINGS button.3 Accesses the MY MEDIA.4 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select File List and press the OK but-ton.5 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select the file you want and press the OK button. )LOH/LVW86%6725$*('(9,&(#########%XWWHUIO\BG'ULYHᯕ*RWRURRWIROGHU ᯕ*RWRXSSHUIROGHUᰳ([LW3DJH3DJH᱇3DJH&KDQJH❸❹❶❺❻❼❷Description❶File List❷Moves to the upper level folder.❸Current page/Total no. of folder pages❹Current page/Total no. of file pages❺Moves to the top level folder.❻Moves to the upper level folder.❼Exit
41ENTERTAINMENT6 Control playback by using the follow-ing buttons.y Click Go Page then the pop-up window for selecting the number of page appears.y Input the page to move to the page you want.y Press the volume button to zoom in or zoom out.1. Press OK.2. Press the Up/Down/Left/Right buttons to move to Go Page or Zoom. *R3DJH =RRP 2SWLRQ +LGH ([LWSetting DescriptionGo PageMoves to the page you want.Use the Up/Down/Left/Right buttons to select a page and press the OK button.Zoom Views the photo in full mode or original mode.Option Sets up the options of File Viewer.Hide Hides the menu.y Press the SETTINGS but-ton to make it appear.Exit Returns to the File Viewer screen.Set FileViewer OptionSetting DescriptionSingle Page LoadingOn Loads and displays pages one by one. The initial loading time is short but a content-heavy page may be displayed slowly.Off Loads all pages of a file to memory before it starts to display them. The initial loading time is long but you can navigate pages quickly after loading is complete. If a file is too large, it may fail to load all the pages.Image QuaIityYou can set the quality of the image included in the document. The following three options are available for the image quality: High, Medium, Low. Higher the image quality, lower the display time.Docu-ment AlignSelects initial document align method.File View settings are default, so close the currently opened document to apply changes to the new document, if any.
42 3D FUNCTION3D FUNCTION3D technology uses different video frames for each eye to add depth to the video.y Warning about photosensitivity sei-zures- Some users may experience a seizure or other abnormal symptoms when they are exposed to a flash-ing light or particular pattern from a video game or movie. If anyone in your family has a history of epilepsy or has ever experienced any kind of seizure, please consult your doctor before viewing 3D images. If you experience one of the follow-ing symptoms while watching a 3D video, stop watching the 3D video immediately and take a rest. - Dizziness, twitching of the eye or facial muscles, involuntary move-ments, cramp, loss of consciousness, confusion, loss of sense of direction, or nausea. If the symptom does not disappear, please consult your doctor.y You can reduce the risk of photosen-sitive seizures by taking the following preventive measures. - Take a rest of 5 - 15 mins. for every 1 hour of viewing. - If vision varies between each eye, correct the variation before beginning to watch a 3D video. - Ensure that the 3D video is directly in front of you, at eye level. - You should stop watching if you experience a headache, fatigue or dizziness. - Do not view 3D images when you are tired or ill.Before Watching 3DWhile Watching 3D WARNINGy If you view 3D images too closely for a long period of time, it may cause blurred vision.y If you watch the projector or game screen for a long time with 3D glass-es on, you may experience dizziness or eye fatigue.y If you are pregnant, a senior citizen, intoxicated, have heart problems, or easily feel motion sickness, we rec-ommend that you do not watch 3D images.y Because 3D images can be recog-nized as real, some viewers may get surprised or overexcited.y Do not watch 3D images near fragile objects or any objects that can be knocked over easily.y Take care not to injure yourself as you may subconsciously try to move away from the life-like 3D images.y Prevent children of 5 years or young-er from watching a 3D video. It may impair the development of their eyes.
433D FUNCTION CAUTIONy Extra special care is required for chil-dren watching a 3D video.When Watching 3D Videoy Watch 3D images within the optimum viewing angle and distance.y If you are outside the viewing angle or distance, you may not be able to watch 3D images. You cannot view 3D images when you lie down.y You may see left and right images overlapped during projector initializa-tion after it is powered on. It may take some time for optimization.y It may take some time for the 3D image look normal after you turn your eyes away from the screen and look back at the 3D image.y It may flicker slightly while watching 3D images under a 3 wavelength lamp fluorescent light (50 Hz - 60 Hz) or near windows. If so, it is rec-ommended to block the sun light with a curtain and to dim the lights.y The 3D glasses must be DLP-LINK (DLP Ready) type.y You may not be able to watch 3D properly if there is an obstacle be-tween the projector and 3D glasses.y Install the 3D projector as far as pos-sible from other devices.Please check the following when using 3D glasses.y Do not use 3D glasses as ordinary glasses, sunglasses or protective goggles. - If you do so, this may cause injury.y Do not store 3D glasses in very hot or very cold conditions. If you do, this may cause them to become distort-ed. Do not use distorted glasses.y Do not drop 3D glasses or allow them to come into contact with other ob-jects. - This can result in damage to the product.y The lenses of 3D glasses are eas-ily scratched. Use a soft clean cloth when cleaning them. - Foreign particles on the cloth may cause scratches.y Do not scratch the surface of the 3D glasses' lenses with sharp objects or wipe them with chemicals. - If the lenses get scratched, images may not look normal when viewing 3D.y Please use 3D glasses certified by LG Electronics.
44 3D FUNCTIONRequirements for Watching 3D Images* Basically, Watching 3D videos should be done in dark room environments only. * For 3D watching, set the energy saving mode to Minimum.* Optimum viewing angle: Top/Bottom/Left/Right 9°Optimum viewing distance: Between 3 m and 5 mRecommended screen size: 101 cm NOTEy The pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen. Therefore, the pairing with DLP-LINK glasses may not work properly if the light reflected from the screen is not bright enough, such as when the surrounding area is bright, the screen is big, or the maximum energy saving mode is enabled.y Some menus may not work while playing a 3D video.y You can only watch a 3D video properly when the 3D video format option has been selected on the projector.
453D FUNCTION1 Please check the minimum system requirements for your computer. Minimum re-quirements are as follows: Microsoft® Windows® XP, Vista 32/64 bit ,Windows 7 32/64 bit Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higherMore than 1GB of system memory (2GB recommended)Free space of 100MB or moreDirectX 9 or higher Video card should support 120 vertical frequency (Hz). Recommended video card requirements - Graphic Processor speed 700 MHz higher - Memory 512 MB highery A laptop equipped with the chipsets above can be used but it may not work properly.2 Set the video output to XGA 120 Hz and play a video file using a video player that supports 3D output.The following video players support 3D output: Stereoscopic Player, nVidia 3D Vision, and TriDef 3D. For more information on the players above, please visit their websites at:www.3dtv.comwww.nvidia.co.krwww.tridef.com
46 3D FUNCTIONTo Use DLP-LINK (DLP-Ready) Type Glasses1 While watching 3D images from the projector, press buttons on the glasses.2 When you press the button, the glasses flicker to be synchronized with the 3D im-ages. (The flickering is a unique operation method of DLP-LINK type glasses. It may be different depending on the glasses type.) 3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to make the room darker. Contact your projector seller for queries about the glasses. Supported 3D input formatsInput Signal Resolution Vertical Frequency (Hz) Supported 3D FormatsHDMI XGA 1024 x 768 120 Frame Sequential / Frame AlternativeRGB-PC XGA 1024 x 768 120 Frame Sequential / Frame Alternativey The resolution supporting 3D mode is 1024 x 768 for HDMI and RGB input.y Some menus may not work in 120 Hz input.Watching 3D Images1 Play supported 3D video titles. 2 For RGB-PC, you must press “SETTINGS PICTURE  Screen Display (RGB-PC)  Auto Config." on the remote control before watching 3D. 3 Press the 3D button. 4 While watching 3D images from the projector, press buttons on the glasses.5 Press the L/R button to switch the playing direction of an image. Select a screen with better 3D display quality.y If you press the 3D button during viewing, it returns to 2D. 6 If a 2D image is displayed on the 16:9 screen, a 3D image is also displayed at the aspect ratio of 16:9. For ratios other than 16:9, a 3D image is displayed in 4:3.y You cannot change the screen size for 3D images.
47CUSTOMIZING SETTINGSCUSTOMIZING SETTINGSSETUP Menu1 Press the SETTINGS button.2 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select a desired item and press the OK button.3 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to set up a desired item and press the OK button.4 When you finished, press SETTINGS.Menu DescriptionPICTURE Adjusts the image quality for optimal viewing.AUDIO Adjusts the sound quality and volume level.TIME Sets the time and time-related features.CHANNEL Sets up and edit channels.LOCK Locks or unlocks channels and programs.OPTION Customizes the general settings.INPUT Selects the desired input source.MY MEDIA Accesses photo, music, movie, and document files.
48 CUSTOMIZING SETTINGSPICTURE Settings1 Press the SETTINGS button.2 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select PICTURE and press the OK button.3 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to set up a desired item and press the OK button.- To return to the previous menu, press the ᰳ button.4 When you finished, press SETTINGS.The available picture settings are described as follows.Setting DescriptionEnergy SavingReduces the power consumption by adjusting the screen brightness.Picture ModeSelects one of the preset images or customizes options in each mode for the best screen performance. You are also able to customize advanced options of each mode.ModeVivid Maximizes the visual effect of video. Displays a crystal clear picture by enhancing contrast, brightness, and sharpness. Standard Has the contrast, brightness and sharpness at normal levels.Cinema Optimizes the image for movie.Sport Optimizes the image for sports by emphasizing primary colors and dynamic actions.GAME Optimizes the image for playing games on fast-moving screens.Expert Adjusts the detailed image settings.CON-TRASTIncreases or decreases the gradient of the video signal.BRIGHT-NESSAdjusts the base level of the video signal to make the image brighter or darker.Sharpness Adjusts the level of sharpness in the edge between the light and dark areas of the picture. The lower the level is, the softer the image looks.Color Adjusts the intensity of all colors.Tint Adjusts the balance between red and green levels.Advanced ControlCustomizes the advanced settings.ᯒ0RYHᯙ2.3,&785(ؒ (QHUJ\6DYLQJ 0HGLXPؒ 3LFWXUH0RGH 6WDQGDUGؒ &RQWUDVW ؒ %ULJKWQHVV ؒ 6KDUSQHVV ؒ &RORU ؒ 7LQW  5*ؒ $GYDQFHG&RQWUROؒ 3LFWXUH5HVHW
49CUSTOMIZING SETTINGSSetting DescriptionPicture ResetRestores the options of each mode to the factory default.Aspect RatioChanges the image size to view images at its optimal size. (See p.25)Picture Wizard IIBy following the instructions, using the remote control, you can eas-ily adjust the picture quality to technical standards without needing an expensive pattern device or a picture quality expert.Screen (RGB-PC)Adjusts the picture quality of RGB-PC input.OptionResolution Available resolutions are 768 resolution (1024 x 768/ 1280 x 768/ 1360 x 768, 60 Hz) and 1050 resolution (1400 x 1050/ 1680 x 1050, 60 Hz).Auto Config.Provides optimized picture quality by automatically calibrat-ing the mismatch of horizontal width and picture shake caused by clashes between the internal settings of the pro-jector and various PC graphic signals.y You can also use the AUTO button on the remote control.Position Moves the image up/down/left/right.Size Changes the screen size.Phase Makes the picture look clear by removing horizontal noise.ResetRestores all the settings to the factory default.Advanced ControlSetting DescriptionDynamic Con-trastAdjusts the contrast to keep it at the best level according to the brightness of the screen.Dynamic Color Adjusts screen colors so that they look natural.Clear White Makes the white area of screen look brighter and whiter.Skin Color Detects the skin area of image and adjusts it to render a natural skin color.Noise Reduc-tionReduces image noise.Digital Noise ReductionThis option reduces the noise produced while creating digital video signals.GAMMA Sets a gradation curve between video input and output signal.Black Level Compensates the brightness and contrast of a screen to balance with the black level of the video input.Not available for RGB-PC.
50 CUSTOMIZING SETTINGSSetting DescriptionReal Cinema Provides the optimal picture quality for watching a movie.Color Gamut Selects the range of colors to display.y Standard: Displays the original colors of an input signal regardless of the display features.y Wide: Sets to use the rich colors of the display.Edge En-hancerProvides much sharper and clearer edges to the picture.Expert Pattern This is a pattern used for expert adjustment.Color Filter Accurately adjusts color and tint by filtering a specific color area of RGB space.White Peaking Adjust white color brightness. White peaking can be adjusted from 0 to 10. Adjust to higher setting to achieve brighter picture. Adjust to lower setting for darker picture.Color Tem-peratureAdjusts the overall color of the screen to suit your preference.Select Warm, Cool or Medium.In Expert mode, you can customize the options of each mode.Gamma: Select 1.9, 2.2,or 2.4.a. Method: 2 points- Pattern: Inner, Outer- Contrast Red/Green/Blue, Brightness Red/Green/Blue:Adjustable range -50 - +50.b. Method: 10 points IRE- Pattern: Inner, Outer- IRE (Institute of Radio Engineers) is the unit that indicates the size of the video signal and can be set as either 10, 20, 30 - 90, or 100. You can fine-tune for each setting as shown below.- Luminance: If you set up luminance for 100 IRE, a luminance value satisfying each gamma is automatically calcu-lated for each step from 10 IRE to 90 IRE.- Red/Green/Blue: The adjustment range is -50 - +50.Color Manage-mentAdjusts Red/Green/Blue/Yellow/Cyan/Magenta colors. Allows an expert to adjust the tint using a test pattern. Six colors (Red/Green/Blue/Cyan/Magenta/Yellow) can be selectively adjusted without af-fecting other colors.You may not see colors change on a normal picture even after ad-justment.- Chroma Red/Green/Blue/Yellow/Cyan/Magenta, Tone Red/Green/Blue/Yellow/Cyan, Magenta: The adjustment range is -30 - +30 each.
51CUSTOMIZING SETTINGSAUDIO Settings1 Press the SETTINGS button.2 Use the 󱛨, 󱛩, 󱛦, 󱛧 buttons to select AUDIO and press the OK button.3 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to set up a desired item and press the OK button.- To return to the previous menu, press the ᰳ button.4 When you finished, press SETTINGS.The available audio settings are described as follows.Setting DescriptionAuto Volume Automatically adjusts the volume level.Clear Voice II Makes the voice from the projector crisp and clear.Balance Adjusts the balance of the left and right speakers.Sound Mode Adjusts sound.OptionStandard Select when you want standard-quality sound.Music Select when you listen to music.Cinema Select when you watch movies.Sport Select when you watch sports events.Game Select when you play games.Infinite SurroundLG's unique sound option provides 5.1 channel stereo sound from two speakers.Treble Adjusts the treble sound.Bass Adjusts the base sound.RESET Resets all the sound settings to the factory default.ᯒ0RYHᯙ2.$8',2ؒ $XWR9ROXPH 2Qؒ &OHDU9RLFH,, 2IIᰕؒ %DODQFH   / 5ؒ 6RXQG0RGH 6WDQGDUGؒ ,QILQLWH6XUURXQG2IIؒ 7UHEOH ؒ %DVV ؒ 5HVHW
52 CUSTOMIZING SETTINGSCHANNEL Settings1 Press the SETTINGS button.2 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select CHAN-NEL and press the OK button.3 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to set up a desired item and press the OK button.- To return to the previous menu, press the ᰳ button.4 When you finished, press SETTINGS.The available channel settings are described in the following.Setting DescriptionAuto Tuning Tunes and stores all available channels through antennas or cable inputs. Manual Tuning Tunes and stores the channels you want manually.Channel Edit Adds or deletes channels. ᯒ0RYHᯙ2.&+$11(/ؒ $XWR7XQLQJؒ 0DQXDO7XQLQJؒ &KDQQHO(GLW
53CUSTOMIZING SETTINGSTIME Settings1 Press the SETTINGS button.2 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select TIME and press the OK button.3 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to set up a desired item and press the OK button.- To return to the previous menu, press the ᰳ button.4 When you finished, press SETTINGS.The available time settings are described as follows.Setting DescriptionClock Sets the time, date, or Timer feature.Off Time/On TimeSets the time to turn on or off the projector automatically. To use this function, you should set the current time and date in advance. NOTEy If you set both Off time and On time features to the same time, the Off time feature overrides the On time feature.y If you do not press any button within 2 hours after the projector turns on by the On Time feature, the projector enters the Standby mode automatically.Sleep TimerSets the length of time until the projector turns off. Auto Off If there is no signal, the projector automatically turns off after the preset time has elapsed.Automatic StandbyIf there is no press any button when Automatic Standby function is on, the Projector automatically switches to the standby mode.ᯒ0RYHᯙ2.7,0(ؒ &ORFNؒ 2II7LPH 2IIؒ 2Q7LPH 2IIؒ 6OHHS7LPHU 2IIؒ $XWR2II PLQؒ $XWRPDWLF6WDQGE\ KRXUV
54 CUSTOMIZING SETTINGSLOCK Settings1 Press MENU to access the menu.2 Press the Navigation buttons to scroll to LOCK and press OK.3 Press the Navigation buttons to scroll to the setting or option you want and press OK.- To return to the previous level, press BACK.4 When you finished, press SETTINGS.The available lock settings are described in the following.Setting DescriptionSet Password Changes the 4-digit password. The default PIN is “0 0 0 0”.If you forget your password, press “0-3-2-5” on the remote control.Lock System Activates or deactivates the lock system.OptionBlock ChannelLocks the selected channel. When you enter the password for a locked channel, the channel is unlocked temporarily.Input Block Locks the selected input.Block ChannelBlocks the channels that contain inappropriate contents for children. The channels can be selected but the screen blank and the audio is muted.To watch a locked channel, enter the password.Movie rating Blocks the movies that are only broadcasted on the projector and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating.RatingGGeneral audiences – All ages admittedPG Parental guidance suggested – Some material may not be suitable for childrenPG-13 Patents strongly cautioned – Some material may be inappropriate for children under 13RRestricted – Under 17 requires accompanying parent or adult guardianNC-17 No one 17 and under admitted.XAdults onlyBlocking Off Permits all programsᯒ0RYHᯙ2./2&.ؒ 6HW3DVVZRUGؒ /RFN6\VWHP 2IIؒ %ORFN&KDQQHOؒ 0RYLHUDWLQJؒ 795DWLQJ&KLOGUHQؒ 795DWLQJ*HQHUDOؒ 'RZQORDGDEOH5DWLQJؒ ,QSXW%ORFNؒ .H\/RFN 2II
55CUSTOMIZING SETTINGSSetting DescriptionTV Rating-ChildrenBlocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature.RatingAge Applies to TV-Y, TV-Y7Fantasy Violence Applies to TV-Y7TV Rating-GeneralBlocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). NOTEy The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children.RatingAge applies to TV-G, TV-PG, TV-14, TV-MADialogue (sexual dialogue) applies to TV-PG, TV-14Language (adult language) applies to TV-PG, TV-14, TV-MASex (sexual situations) applies to TV-PG, TV-14, TV-MAViolence applies to TV-PG, TV-14, TV-MADownloadable RatingThis function operates only when projector has received Region5 Rating data. The name of the rating option may differ. NOTEy This feature is available only for digital channels.Input Block Block the input sources.Key Lock This feature can be used to prevent unauthorized viewing by locking out the panel controls, so that it can only be used with the remote control.In Key Lock 'On', if the projector is turned off, press the Power button.With the Key Lock 'On', the display 'Key Lock' appears on the screen if any button on the panel is pressed while viewing the projector.
56 CUSTOMIZING SETTINGSOPTION Settings1 Press the SETTINGS button.2 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to select OPTION and press the OK button.3 Use the 󱛨, 󱛩, 󱛦 or 󱛧 button to set up a desired item and press the OK button.- To return to the previous menu, press the ᰳ button.4 When you finished, press SETTINGS.The available option settings are described as follows.Setting DescriptionLanguage Selects a desired Menu Language.PJT Mode This function turns the projected image upside down or flips horizon-tal.y Select Rear when projecting from the back of the transparent screen purchased separately.y Select Ceiling when installing the product on the ceiling.y When PJT Mode is Rear/Front Ceiling, the left/right of the speaker changes automatically.Auto KeystoneAuto Keystone provides a rectangular screen image by automatically adjusting the Keystone number when there is a trapezoidal screen im-age caused by tilting of the projector.OptionON Automatically adjusts the Keystone number.Off Manually adjusts the Keystone number.Keystone To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen.Blank ImageSelects a background for blank Image. (see page 27)3D Mode Selects 3D mode.Auto Input SearchAutomatically searches and displays an input signal type when it is received.ᯒ0RYHᯙ2.237,21ؒ /DQJXDJHؒ 3-70RGH )URQWؒ $XWR.H\VWRQH 2Qؒ .H\6WRQH  ؒ %ODQN,PDJH %OXHؒ '0RGHؒ $XWR,QSXW6HDUFK 2IIؒ $XWR3RZHU 2IIؒ +LJK$OWLWXGH 2IIؒ &DSWLRQ 2IIؒ 6WDQGE\/LJKW 2IIؒ 'LY;592'ؒ ,QLWLDO6HWWLQJ
57CUSTOMIZING SETTINGSSetting DescriptionAuto Power Makes the projector turn on automatically when the adaptor plug is inserted.OptionOn When the DC plug is connected to the projector, it turns on automatically.Off When the DC plug is connected to the projector, it goes into standby mode.High Altitude If the projector is used at an altitude higher than 1200 meters, turn this on. Otherwise, the projector may overheat or its protection function may be activated. If this happens, turn the projector off and then on again after waiting for several minutes. Caption Sets whether to display captions and customize your option in each mode.ModeCC 1-4 (Closed Captioning)Displays the audio portion of a TV program as text on the screen. CC1 is the most common mode in use.- Field 1 data channels: two Captions (CC1, CC2) and two Text (T1, T2).- Field 2 data channels: two Captions (CC3, CC4) and two Text (T3, T4).Text 1-4Service 1-6 This is only available for the digital broadcasting system.Option (For Digital Broadcasting)Size Selects the wordsize.Font Selects a typeface for the text.Text Color Selects a color for the text.Text Opacity Adjusts the opacity for the text color.Bg Color Adjusts the opacity for the text color.Bg Opacity Adjusts the opacity for the background color.Edge Type Selects an edge type.Edge Color Selects a color for the edges.
58 CUSTOMIZING SETTINGSSetting DescriptionStandby Light Adjusts the LED button indicator.OptionOn When the buttons are touched, their indicators are all turned on at maximum brightness. In standby mode, all LED indicators are turned on at 20 % of the maximum brightness.Off When the buttons are touched, their indicators are all turned on at maximum brightness. In standby mode, all LED indicators are turned off.DivX(R) VOD sets DivX related settings.Initial Setting Resets all the projector settings to the factory default.
59MAKING CONNECTIONSMAKING CONNECTIONSYou can connect various external devices to the ports on the projector.HDMI - 60 PageComponent - 62 PageINPUT (AV) - 61 PageRGB - 60 PageMemory - 28 PageHeadphones - 62 PageComputer/Notebook VideoDVDDigital DeviceUSBHeadphones Game Console
60 MAKING CONNECTIONSConnecting to an HD Receiver, DVD, or VCR PlayerConnect an HD receiver, DVD, or VCR player to the projector and select an ap-propriate input mode.HDMI ConnectionWith an HDMI cable, you can enjoy high quality picture and sound. Press the INPUT button on the remote control to select HDMI. $9,1'&,1$17(11$,15*%,1HVOL -VOL +CHCH+'0,Connecting to a PCThe projector supports Plug & Play. A PC will automatically recognize the projector and requires no driver to be installed.RGB ConnectionConnect the PC output and the PC video input port of the projector with the RGB cable. For audio signal, connect the PC and the projector with an optional audio cable. $9,1'&,1$17(11$,15*%,1$9,15*%,1$8',22875*%2873&AccessoriesOptional Extras
61MAKING CONNECTIONSConnecting to the AV INPUTConnect the output ports of an external device and the AV INPUT port of the projector. Press the INPUT button to select AV.$9287/HIW 5LJKW$8',2287$9,1'&,1$17(11$,15*%,1$9,1 $9,1'&,1$17(11$,15*%,1VOL +CHCH$9,15*%,1AUDIO OUTRGB OUT (PC)You can connect the audio cable without using a gender as shown in the illustra-tion above.
62 MAKING CONNECTIONSComponent ConnectionYou can enjoy vivid images when you connect an external device with a RGB IN port to the component port of the projector. Press the INPUT button on the remote control to select Component.$9287/HIW<3%355LJKW$8',2287$9,1'&,1$17(11$,15*%,1VOL +CHCH$9,15*%,1Connecting to HeadphonesYou can listen to the audio through a headphone.$9,1'&,1$17(11$,15*%,1HVOL -VOL +CHCHVOL +CH
63MAINTENANCEMAINTENANCEClean your projector to keep it in opti-mum condition.Cleaning the ProjectorCleaning the LensIf there is any dust or staining on the lens surface, you must clean the lens.Use an air spray or a cleaning cloth to clean the lens.To remove dust or stains, use an air spray or apply a small amount of clean-ing agent onto a swab or soft cloth to lightly rub the lens.Please be aware that liquid may flow onto the lens if the product is sprayed directly onto the lens.Cleaning the Projector CaseTo clean the projector case, first unplug the power cord.To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish the lens.Do not use alcohol, benzene, thinners or other chemicals, which may damage the case.
64 SPECIFICATIONSSPECIFICATIONSMODELS PA75U (PA75U-JE)Resolution (Pixel) 1280 (Horizontal) × 800 (Vertical)Aspect ratio 16:10 (Horizontal:Vertical)Panel size (mm) 11.623Projection distance (Video size) 0.90 m-3.06 m (76.2 cm - 254.0 cm)Ratio of upward projection 100 %Working range of the remote control 6 mVideo input NTSC, ATSCAC-DC Adaptor 19.5 V , 4.62 A (Adaptor Input 100 ~ 240 @ 50 Hz/60 Hz)Audio Output 1 W + 1 WTelevision System DTV-ATSC / TV-NTSCProgram Coverage VHF 2 - 13, UHF 14 - 69, CATV 01 - 135, DTV 2 - 69, DTV 1 - 135 External AntennaImpedance 75 Ω (VHF/ UHF)Height (mm) Front 56.5 (without foot), 60.0 (with foot)Back 44.0 (without foot), 47.5 (with foot)Width (mm) 230.0Depth (mm) 170.0Weight (g) 1350USB Device 5 V, 0.5 A (Max.)Operation environ-mentTemperatureOperation 0 °C - 40 °CStorage -20 °C - 60 °CRelative HumidityOperation 0 % - 80 % Storage 0 % - 85 %
65SPECIFICATIONSHDMI/DVI-DTV supported modeResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)720*480 31.46931.559.9460720*576 31.25 501280*720 37.544.96455059.94601920*1080 33.7233.7528.12526.972733.71633.7556.2567.4367.559.94605023.972429.97630.005059.9460Component port connecting informationSignal Component480i / 576i o480p / 576p o720p / 1080i o1080p o (50 Hz / 60 Hz only)y If an invalid signal is input into the projector, it will not be displayed properly on the screen or a message such as “No Signal” or “Invalid Mode” will be displayed.y The projector supports the DDC1/2B type as the Plug & Play function (Auto-recog-nition of PC monitor).y PC synchronization signal types sup-ported: Separate type synchronization.y In PC mode, 1280 x 800 is recommend-ed for the best picture quality.Supported Monitor DisplayResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)640*350 31.468 70.09720*400 31.469 70.08640*480 31.469 59.94800*600 37.879 60.311024*768 48.363 60.00119.991152*864 54.348 60.0531280*800 49.68 601360*768 47.712 60.0151280*1024 63.981 60.0201400*1050 65.317 59.9791680*1050 65.3 60
66 SPECIFICATIONSOpen Source Software InformationTo obtain the source code under the GPL, LGPL, MPL and other open source licenses, which is contained in this prod-uct, please visit http://opensource.lge.com.In addition to the source code, all re-ferred license terms, warranty disclaim-ers and copyright notices are available for download.If you send an email to opensource@lge.com to request for the software’s open source code installed into the projector within three years of purchase, we will send you a CD-ROM. You will only be charged a minimum for packaging and delivery.
The model and serial number of the projec-tor are located on the back or on the side of the projector. Record them below should you ever need service.MODELSERIAL

Navigation menu