LG Electronics USA V32 Cellular/PCS GSM/GPRS/EDGE/WCDMA and LTE phone with Bluetooth, WLAN and RFID User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2594332
Application ID	zdgWPNxmLyw2CeQzkPOLlA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.12kB (476497 bits)
Date Submitted	2015-04-23 00:00:00
Date Available	2015-07-20 00:00:00
Creation Date	2015-04-03 13:15:56
Document Lastmod	2015-04-09 17:23:04
Document Title	Manual

■■ These instructions are divided into the following categories.
This symbol indicates the potential and imminent danger of death or
serious injury*1 to a person.
This symbol indicates "the possibility of death or serious injury to a
person".
This symbol indicates the possibility of personal minor injury
or physical damage*3.
*2
LGV32
Notes on Usage
・ "Setting Guide", "Basic Manual", "Notes on Usage", etc. are collectively referred to as
"Instruction Manual".
・ In this manual, isai xxx (LGV32) is usually referred to as the "product".
・ In this manual, "microSD™ memory card", "microSDHC™ memory card" and
"microSDXC™ memory card" are abbreviated as "microSD memory card" or "microSD".
to a person
*1 Serious injury : This refers to loss of sight, injury, burns (high- and low-temperature),
electric shock, broken bones, injuries with residual aftereffects from poisoning,
etc., and injuries requiring hospital admission for treatment or long term hospital
attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock,
etc. that do not require hospital admission for treatment or long-term hospital
attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock, or
pets.
Not liquids
If the wet main unit is charged, electric shock, short circuit, or corrosion may
occur and overheating may cause fire or malfunction or burns.
No
wet hands
Do not splash with water or other liquids. Also, never use in places subject to
direct splashing with water or pet urine, etc. or in humid places such as bath
Not liquids areas, or use with wet hands. Doing so might cause electric shock, fault from
short-circuiting, or corrosion of electronic circuits. In the event that the product is
splashed with liquid, immediately disconnect the AC adapter's power plug. Faults
caused by wetting with water or humidity are not covered by the warranty and
No
wet hands charges will be incurred for repair.
Although this product model has waterproof property, stop using it if liquid such
as water gets inside the main unit from the back cover. Continued use of the
Not liquids product in this state might cause overheating, fire, or a fault.
■■ Explanation of graphic symbols used in this manual
April 2015, 1st Edition
Indicates an action
that is not allowed.
MFLxxxxxxxx
Don’t
For inquiries, call:
Customer Service Center
For general, charge, operations (toll free)
Keitai Guarantee Service Center
For loss, theft or damage (toll free)
From fixed-line phones:
From fixed-line phones/au cell phones,
Business hours 9:00～20:00 (7 days a week)
0077-7-111
From au cell phones:
157 area code not required
For service canceling procedure in case of loss or theft
(toll free)
Business hours 24-hour (7 days a week)
0077-7-113
0120- 925- 919
Cell phone and PHS operators collect and
recycle unused telephones, batteries and
battery chargers at stores bearing the
logo regardless of brand and manufacturer
to protect the environment and reuse
valuable resources.
Not
disassembly
Do
In case above numbers are not available,
Do
KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan Inc.
Manufactured by: LG Electronics Inc.
Be sure to use only the specified peripheral devices. Use of other devices might
cause overheating, ignition, rupture, fault, or leakage of liquid.
• The Company is not liable for any incidental damages (change/disappearance of
described content, loss of business income, disruption of business, etc.) arising from
use or inability to use the product.
Don’t
Do not put the product in a cooking apparatus such as a microwave oven or a
pressure vessel. Doing so might cause ignition, rupture, fault, fire or injury.
Do not throw the product into a fire or heat it. Doing so might cause fire, rupture or
fire.
Do not short-circuit the connection terminal, earphone terminal, etc. Do not allow
conductive foreign objects (metal fragments, pencil leads, etc.) to come into
Don’t contact with or get inside the connection terminal, earphone terminal, etc. Doing
so might cause a fire, burns, a fault due to heat generation.
When using metal accessories, etc., make sure not to allow the metal part come
in contact with the connection terminals, earphone terminal or power outlet. Doing
Don’t so might cause electric shock, ignition, injury or a fault.
Don’t
Do not expose the camera lens to direct sunlight for an extended period. Doing so
might cause ignition, rupture or fire by the light-collecting mechanism of the lens.
The customer is not allowed to disassemble, modify or repair the product.
Doing so might cause a fault, ignition, electric shock, or injury. The Company
Not
is not liable even in the event of any non-conformities arising on the product or
disassembly
peripheral devices as a result of modification, etc. Modification of the product is in
violation of the Wireless Telegraphy Act.
Be sure to read the following cautions before use.
Safety Precautions (Observe Strictly)
Don’t
Don’t
■■ Before using the product, thoroughly read these safety precautions for proper
use. After reading, store the precautions in a safe place.
●● These "Safety Precautions" describe instructions that should be observed to prevent
damage to property or injury to the customer or others using the product.
●● These instructions are divided into the following categories.
Don’t
Do not drop or subject to strong impact, such as throwing. Doing so might cause
rupture, overheating, ignition, or a fault.
If the product is damaged because it is dropped or something, and its display
is cracked or internal parts are exposed, do not touch the cracked display or
Don’t exposed parts with your hands. Doing so might cause electric shock or injury from
damaged parts. Contact au shop or Keitai Guarantee Service Center.
Do
Don’t
Do
Do
Be careful not to have the product bitten by your pet. It might cause liquid
leakage, overheating, rupture, fire, injure or ignition of the internal battery.
Do not use the product while you are aboard an airplane. Use of electric devices
transmitting radio waves in airplane is prohibited by law. Some airline companies,
Don’t however, allow their passengers to use cell phones. For details, contact the airline
company you use.
Do
Do
This product sometimes affects high-precision electronic devices. So, turn it off
near such devices. (Examples of electronic devices that might be affected by
the product include cardiac pacemakers, hearing aids, other electronic medical
devices, fire alarms, and automatic doors. If you are using an electronic medical
device, contact the device manufacturer or retailer for information about the
possible affect of radio waves.)
When using the product near an implanted pacemaker, implanted cardioverterdefibrillator or other electronic medical device, radio waves might affect these
units and devices. So, please observe the following.
1. Those with an implanted pacemaker or implanted cardioverter-defibrillator
should carry or use the product at least 15 cm away from the pacemaker or
cardioverter-defibrillator applied part.
2. Set the product to airplane mode or turn off the power in advance in places
where you cannot move freely or where you cannot secure a distance of more
than 15 cm with one another, since there may be people with a implanted
cardiac pacemaker or implanted cardioverter-defibrillator nearby.
3. Pay attention to the following points when using the product inside medical
institutions.
• Do not bring the product into operating theaters, intensive-care units (ICU) and
coronary care units (CCU).
• Turn the product off in hospital wards.
Do not use the product with the back cover removed.
Don’t
Do not disassemble, modify or directly solder the product. Doing so might cause
spilling of the battery liquid resulting in an accident such as loss of eyesight if it
gets into the eyes, or cause overheating, injure, fire or rupture.
Do not use a cell phone while driving a car or riding a motorbike or bicycle. It might
cause a traffic accident. Use of a cell phone while driving a car or motorbike is
Don’t prohibited by law. Use of a cell phone while riding a bicycle may be punishable by
some regulations.
• When a medical institution has laid down designated areas where use of
the product is prohibited or is not allowed to be brought in, abide by the
instructions of that medical institution.
4. When using electronic medical devices other than an implanted pacemaker
and implanted cardioverter-defibrillator outside a medical institution (e.g. home
medical treatment), check individually with the manufacturer of the electronic
medical device regarding the influence of radio waves.
Do not place near corrosive chemicals or in places where corrosive gas is
generated. Doing so might cause a fault or loss of internal data.
Do not leave or store with the back cover removed from the main unit. Doing so
might allow dust or other foreign objects to get inside and cause a fault.
Do not use the product if there is smoke, abnormal odor or noise, excessive
overheating, or other abnormalities. If an abnormality occurs, disconnect the
specified charging equipment (sold separately) from the power outlet, make sure
that the product is not overheating before turning the power off, and contact an
au shop or Keitai Guarantee Service Center. Also, if you have dropped or damaged
the product, do not continue to use it in that state, and contact an au shop or
Keitai Guarantee Service Center.
When inserting an earphone, etc. into the product, adjust the volume to the proper
level. Setting too loud a volume or using the earphone continuously for a long
period of time might adversely affect your ears.
Also, raising the volume too high might prevent you from hearing sounds around
you, which might in turn lead to a traffic accident at a railroad crossing or
pedestrian crossing.
Do
When adjusting the volume with an earphone, etc. inserted into the product, raise
the volume a little at a time. If you raise the volume too much from the outset,
sudden loud noise from the earphone, etc. might adversely affect your ears.
Do
When using an charging equipment or external device, insert/remove the
connector straight to/from the terminal. Unless it's correct, it may cause damage
or a fault.
Do
Stay alert to your surroundings when calling, messaging, browsing the Internet,
shooting photos, playing games, watching TV or listening to music. Failure to do
so might cause a fall or traffic accident.
Do not send data by infrared communication with the infrared port pointing
toward eyes. Doing so might affect eyes. Also, sending data with the infrared port
Don’t pointing toward some other infrared device might cause false operation, etc.
When using the photo light, do not lighten in front of person's eye. Do not gaze
at the light emitting part when the photo light is lighted. Doing so may cause
Don’t impairment of eyesight, etc. Be especially careful not to take pictures of small
children from a very close distance.
Do not lighten the photo light toward a person who drives an automobile,
motorized bicycle or a bicycle. If dazzled by the light, the driver might become
Don’t unable to drive and cause an accident.
Do
Sometimes, very rarely some people demonstrate symptoms such as temporary
muscle spasms, loss of consciousness, etc. by watching repeatedly flickering
screens. Those with a past history of this should consult with a physician
beforehand.
Do
If you feel any abnormality with your skin, immediately consult a dermatologist.
Itching, rashes, eczema, etc. sometimes occurs depending on your physical
constitution and condition.
■■ The materials of parts used on the product are as follows.
Part
Material
Surface treatment
Outer case (display frame part)
PC resin
NCVM
Outer case (side)
PC resin
Surface treatment
PC+TPE resin
Back cover
PC resin
UV coating
Blue, Pink
White
Volume key
Blue, Pink
PC+TPU resin
White
UV coating
PC+TPU resin
NCVM
Display
Hardened glass
Easy cleaning coating
Earpiece
Stainless steel
PVD coating
Lens for the camera
Soda-lime glass
AR, AF coating
Camera lens decoration
AL
Anodic oxide
Photo light, infrared port
PC resin
Do not bring the product close to magnetized objects such as cash cards, floppy
disks, credit cards, and prepaid cards. Doing so might result in loss of recorded
Don’t information.
Do not allow liquids, metal objects, burnable items, and other foreign matter to get
inside the microSD memory card slot or earphone terminal. Failure to do so might
Don’t cause fire, electric shock, injure or a fault.
Don’t
Do
Do
Do
Don’t
Do
Do
Unplug
Be careful when setting vibrator (vibration) or ringtone if you heart is weak. Doing
so might result in bad effect to heart.
Pay attention to items stuck to the main unit. The speaker uses magnets, and
so thumbtacks and pins, craft knife blades, staples, and other metal objects
sometimes become stuck to the main unit, and cause unexpected injury. Before
using the product, be sure to check that there are no foreign objects on the
speaker or other parts.
Do not place the product directly on sand at a beach, etc. Sand or other small
particles might get inside the earpiece (receiver), microphone (microphone), or
Don’t speaker, causing the volume to drop. If sand gets inside main unit, it might cause
overheating or a fault.
When using the product for calling or data communication, be careful not to keep
the product in direct contact with your skin for a prolonged period, or not to cover
Don’t the product with paper, cloth, bedding, etc. The main unit might get hot, causing
fire, injure, burns or a fault.
Li-ion00
Do
Do
The battery pack is a consumable item. If the performance of a battery does not
recover (e.g. the usable time after each charge has become extremely short), the
battery is at the end of service life, so stop its use. Failure to do so might cause
overheating, fire, rupture, or leakage. Because the battery is a built-in type, an au
shop will accept holding over and repair for a charge. You may not use the product
for a certain period. Please be forewarned. Note that the length of service life
varies depending on the usage condition, etc.
■■ Charging equipment
Not liquids
Do
Don’t • AC adapter (sold separately): 100 VAC to 240 VAC
• Common DC adapter 03 (sold separately) : 12/24 VDC (for negative grounded
vehicles only)
Do
Do
Firmly insert the plug of the specified charging equipment (sold separately)
into the power outlet or cigarette lighter socket down to the base of its pins.
Incomplete insertion of the power plug might result in electric shock, overheating,
ignition, injure and fire. Do not use the damaged specified charger, power outlet or
cigarette lighter socket with loose insertion connector.
If the fuse in the common DC adapter 03 (sold separately) blows, replace it with
a fuse of the specified type (250 V, 1A). Replacing with a different type of fuse
might cause overheating or fire. (For information about fuse replacement, carefully
read the manual for the common DC adapter 03 (sold separately).)
Do not damage, modify, twist, pull, or place a heavy object on the power cord of
the specified charging equipment (sold separately). Do not use a damaged cord.
Don’t Doing so might cause an electric shock, injyure, short circuit or fire.
Don’t
Do not let your hands, fingers and other parts of the body touch the connection
terminals. Doing so might cause electric shock, injury or a fault.
LG TV antenna cable 01 is not waterproof. Do not splash with water or other
liquids. Also, never use in places subject to direct splashing with water or pet
Not liquids urine, etc. or in humid places such as bath areas, or use with wet hands. Doing so
might cause electric shock, fault from overheating, fire, electric shock or corrosion
of electronic circuits.
No
wet hands
Be sure to read the following cautions before use.
Do
Don’t
Do
When unplugging the plug of the specified charging equipment (sold separately)
from the power outlet, hold and pull the power plug. Pulling on the cable might
damage it.
Do not use the common DC adapter 03 (sold separately) with the car engine
stopped. Doing so might result in draining of the car battery.
■■ au Nano IC Card (LTE)
Be sure to read the following warnings before use.
Do not put the au Nano IC Card (LTE) in a cooking apparatus such as a microwave
oven or a pressure vessel. Doing so might cause melting, overheating, fuming,
Don’t loss of data or a fault.
Be sure to read the following cautions before use.
Do
Do
Not
disassembly
Be careful when attaching/removing the au Nano IC Card (LTE). Doing so might
injure your hands or fingers.
Use only the devices specified by the Company to insert the au Nano IC Card
(LTE) in. Using a device not specified by the Company might cause loss of data or
a fault. For the specified devices, contact an au shop or Customer Service Center.
Do not disassemble or modify the au Nano IC Card (LTE). Doing so might cause
loss of data or a fault.
Do not use or leave the au Nano IC Card (LTE) in hot places such as by the fire
or a heater. Doing so might cause melting, overheating, fuming, loss of data or a
Don’t fault.
Don’t
Don’t
Don’t
Don’t
Do not throw the au Nano IC Card (LTE) into a fire or heat it. Doing so might cause
melting, overheating, fuming, loss of data or a fault.
Do not touch the IC (metal) part of the au Nano IC Card (LTE) or short-circuit it.
Doing so might cause loss of data or a fault.
Do not drop the au Nano IC Card (LTE) or subject it to strong impact. Doing so
may cause a fault.
Do not fold, bend or place a heavy object on the au Nano IC Card (LTE). Doing so
may cause a fault.
Do not wet the au Nano IC Card (LTE). Doing so may cause a fault.
Not liquids
Don’t
Do not scratch the IC (metal) part of the au Nano IC Card (LTE). Doing so may
cause a fault.
Do not store the au Nano IC Card (LTE) in dusty places. Doing so may cause a fault.
Don’t
Store the au Nano IC Card (LTE) out of reach of small children. Accidental swallow
might cause suffocation, injury, etc.
Be sure to read the following warnings before use.
Do
Charge the battery in a stable place. If placed on an inclined surface or wobbly
stand, the product might fall causing injury or damage. Pay careful attention while
vibrator is set. In addition, do not cover or wrap the product with a cloth or bedding.
Doing so might cause a fire, injure or a fault.
Do not store the au Nano IC Card (LTE) in places exposed to direct sunlight or hot
and humid places. Doing so may cause a fault.
■■ LG TV antenna cable 01
Do not use in humid places such as bath areas, or connect/disconnect the AC
adapter with wet hands. Doing so might cause electric shock, injure or a fault.
No
wet hands
Be sure to read the following warnings before use.
Do not use at other voltages than the specified power supply voltage. Doing so
might cause ignition, fire, overheating, injure or electric shock.
When the AC adapter is not to be used for a long time, disconnect the AC
adapter's power plug from the power outlet. Doing so might cause fire or a fault
Do
Do
Be sure to read the following hazards before use.
If the leaked liquid gets on your skin or clothes, immediately rinse it off with water
to avoid injury. If the liquid gets into your eyes, do not rub, but after wash your
eyes with water, and immediately consult a doctor to avoid the risk of losing your
eyesight. If the liquid gets on a device, wipe it off without touching it.
Install and position in-car devices where they do not hinder driving or safety
equipment such as airbags. It might cause a traffic accident. Install in-car devices
following the instructions of their manuals.
Don’t
Be sure to read the following warnings before use.
■■ Battery pack
(The battery pack of the product is a lithium polymer battery.)
When you purchase your cell phone, it is not fully charged.
Charge the battery before using the product.
Wipe off the dust on the power plug. Failure to do so might cause a fire, burns, or
electric shock.
Do not use in places subject to direct splashing with water, pet urine, or other
liquids. Doing so might result in faults and injure resulting from overheating, fire,
Not liquids electric shock, or short-circuiting of electronic circuits. In the event that the
product is splashed with liquid, immediately disconnect the AC adapter's power
plug.
Do not swing the product around by holding earphones, LG TV antenna cable 01,
etc. Doing so might cause an accident or damage.
Do not use it with microSD memory card slot cover closed. Doing so might result
in malfunction due to dust and water getting in.
If you hear thunder, do not touch the power plug. Doing so might cause an electric
shock as a result of a lightning strike.
Before cleaning the specified charging equipment (sold separately), unplug its
power plug from the outlet or cigarette lighter socket. If the plug remains plugged
Unplug in when you clean the equipment, it might cause an electric shock or short circuit.
Power key
Be sure to read the following cautions before use.
Use of the main unit in an automobile sometimes affects on-vehicle electronic
devices, though this rarely happens. If this happens, stop use since this may
Don’t impair safe travel.
Material
Exterior case (microSD memory card
slot/periphery cover)
• Even if you are in a lobby, etc., be sure to turn the product off when there are
electronic medical devices nearby.
Do not use power outlets or wiring apparatus beyond its rating. Also, exceeding
rating, for example, by connecting multiple devices to a single power strip might
Don’t cause overheating and fire.
Don’t
Do not puncture the product with a nail, hit with a hammer or step on the product.
Doing so might cause fire or damage.
Be sure to read the following warnings before use.
Be careful when using this product in a high temperature place for a long time. It
might become hot. Use of it with your skin touching the product for a long time
Don’t might cause low-temperature burns.
Do not use outside when you can hear thunder. Doing so might risk lightning
strikes and electric shock.
Do not let your hands, fingers and other parts of the body touch the connection
terminals. Doing so might cause electric shock, injury or a fault.
Not
disassembly
Do not touch the main unit of the product and the specified AC adapter (sold
separately) for a long time while power is being supplied from an external source.
Don’t Doing so might cause low-temperature burns.
Be sure to read the following warnings before use.
• The content of this manual is subject to change without notice.
Don’t
Do not store the product in places subject to direct sunlight (e.g. in cars), places
that get hot, places that get extremely cold, and in humid or dusty places. Doing
Don’t so might cause overheating, fire, deformation or a fault.
Don’t
Part
Be sure to read the following hazards before use.
Do not leave in places within the reach of small children. Small children might
swallow small parts, etc. by mistake and choke on them, or might drop them by
Don’t mistake and cause accidents or injury.
memo
• Reproduction of the content of this manual in part or in whole is prohibited.
• Every effort has been made in the preparation of this manual. Should you notice any
unclear points, omissions, etc., feel free to contact us.
If charging is not completed after the specified charging time, stop charging.
Failure to do so might cause leakage of liquid, overheating, rupture or ignition.
Do not cover or wrap this product with bedding, etc. while using or charging the
product. Doing so might cause fire, fault or injury.
Don’t
• It is recommended you keep a copy of important data on your PC's hard disk, etc.
Whatever the cause of the defect or malfunction may be, the Company assumes no
responsibility for alteration or loss of saved data.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan, Inc.
Manufactured by: LG Electronics Inc.
Don’t
Before entering an area where flammable gas is generated such as a gas station,
be sure to turn off this product. Do not charge the battery. Failure to observe
these precautions might cause the gas to catch fire. In addition, when using
Osaifu-Keitai® at a gas station, be sure to turn off the power in advance. (If NFC/
Osaifu-Keitai® lock has been set, cancel the lock before turning off the power.)
• The Company is not liable for any damages arising from earthquakes, lightning, storms,
floods or other natural disasters, as well as fires, actions by third parties, other
accidents, intentional or mistaken misoperation by the customer, or use under other
unusual conditions outside the responsibility of the Company.
• Captured image data or downloaded data may sometimes be altered or lost due
to faults, repair or other handling of the product. The Company is not liable for any
damage or lost income resulting from recovery of these data.
Don’t
Do not operate the product while driving a car or motorbike, riding a bicycle, or
walking. Doing so may compromise traffic safety and cause an accident.
Do not leave on unstable places such as rocky stands or tilting surfaces.
Dropping the product may cause injury or damage. Pay sufficient attention while
Don’t vibrator is set to ON. Also, pay sufficient attention to impact, etc.
Exemptions
• The Company is not liable for any damages arising, for example, from malfunction
caused by combination with connected devices or software not related to the
Company.
Don’t
When removing the back cover, do not exert more than necessary force. Doing so
might cause injury or a fault.
Do not use, store or leave the product in hot places (e.g. by the fire, near a heater,
under a kotatsu, in direct sunlight, in a car in the hot sun). Doing so might cause
Don’t ignition, rupture, fault, fire or injury.
Do
• The Company is not liable for any damages arising from failure to observe the
described content of the "Instruction Manual".
Unplug
Indicates that the power
plug must be disconnected
from the power outlet.
No
wet hands
Be sure to read the following hazards before use.
113 area code not required
Sold by:
Indicates that disassembly
is not allowed.
Indicates an action
that must be done.
■■ Precautions common to the main unit, battery pack, charging equipment, au
Nano IC Card (LTE), peripheral devices
From au cell phones:
0120- 977- 033 (except Okinawa)
0120- 977- 699 (Okinawa)
Indicates that handling with
wet hands is not allowed.
Business hours 9:00 – 21:00 (7 days a week)
PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR
AFTER CALLING 157 ON YOUR au CELL PHONE
From fixed-line phones:
No
wet hands
Indicates that use in a
place where the product
is likely to get wet or
Not liquids allowing the product to
get wet is not allowed.
■■ Main unit
Do not make the connecting plug of LG TV antenna cable 01 dirty. Doing so may
cause a fault.
Insert or remove the connecting plug of LG TV antenna cable 01 into/from the
earphone jack straightly.
If you feel any abnormality with your skin, immediately consult a dermatologist.
Itching, rashes, eczema, etc. sometimes occurs depending on your physical
constitution and condition.
■■ The materials of parts used on the LG TV antenna cable 01 are as follows.
Part
Material
Surface treatment
Earphone jack (body)
TPE resin
Cable
TPE resin
Connecting plug (body)
TPE resin
Connecting plug (metal
parts)
Brass
Gold plating
Handling Precautions
These precautions are provided to ensure that performance can be fully
demonstrated.
Thoroughly read these precautions to ensure correct use.
■■ Precautions common to the main unit, battery pack, charging equipment, au
Nano IC Card (LTE), peripheral devices
●● Do not apply excessive force to the product during use. Be sure not to put the product
into a tightly packed bag or place a heavy object on the product in a bag. Sitting on
the product in your pocket might damage the display or internal circuit board resulting
in a malfunction. 
Keeping an external device connected to the external connector or earphone jack
might damage the connector resulting in a malfunction. Such damage and malfunction
are not covered by the warranty, even if there is no external damage.
●● To ensure waterproof property (equivalent to IPX5 and IPX7) of this product, use the
product with the cover tightly closed. 
Note that the waterproof property is not guaranteed in every usage condition. Do not
allow water to get inside the product or splash water on the charging equipment or
optional accessories. Do not attach/remove the back cover in the rain or with water
drops on the surface of the product. Doing so might cause water intrusion resulting in
internal corrosion.
Malfunctions determined to be caused by water intrusion are not covered by the
warranty.
●● Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and humidity range of 35%
to 85%.)
●● Do not use in places subject to lots of dust or vibration.
●● Clean the connection terminals and earphone terminal with dry cotton swabs, etc.
every now and then. Soiled terminals might cause poor connection. Do not exert a
strong force to clean the connection terminals to prevent deformation.
●● Clean the product with a soft dry cloth (such as the type used for eyeglasses). Forceful
rubbing with a dry cloth may scratch the display. The display may be stained if splash or
smear is left attached to the surface. Wiping the product using alcohol, thinner, benzene,
detergent, etc. might erase the printing on the outer casing or cause discoloration.
●● Use as far away as possible from land-line phones, TVs, and radios. Use nearby might
affect them.
●● The product may become warm while charging etc., depending on the situations, but
this is not abnormal.
●● When the product is used by a child, parents or guardians should thoroughly read
"Instruction Manual" and teach the child how to use it.
■■ Main unit
●● Do not forcefully press, tap, or intentionally subject the display to strong impact. Doing
so might cause scratching or damage.
●● Do not forcefully press your fingernails, sharp objects, or hard objects against keys or
display surface. Doing so might cause scratching or damage. 
The touch panel is designed to be lightly touched by fingers. Do not apply strong
pressure with your fingers or sharp-pointed objects (such as fingernails, ballpoint pens,
and pins) on the touch panel.
In the following cases, the touch panel may not work even if you touch it. Note that it
may cause malfunction.
•
•
•
•
•
•
•
Operation
Operation
Operation
Operation
Operation
Operation
Operation
with gloved hands
with fingernails
with a foreign object placed on the touch panel
with a protective sheet or sticker on the touch panel
with water drops left or frozen on the surface
with wet or sweaty fingers
under water
●● Do not remove the stickers printed with the IMEI that can be seen when the back pack is
removed. These stickers prove that the product and the communication module you are
using comply with the Wireless Telegraphy Act and Telecommunications Operations Act.
●● Never use modified au cell phones. Use of a modified device violates the Radio Law.
The product has acquired the certification of conformity with technical regulations
for the specified radio station based on the Radio Law, and the "Technical Conformity
Mark " is printed on the nameplate of the product as a certificate. Confirm nameplate
following the operations below. 
Home screen u Touch and hold "
"u "System settings" u "General" tab u "About
phone" u "Regulatory and Safety"
If the product is modified by turning the screw to the left to disassemble, technical
standard compliance becomes invalid. Never use the product without the valid
certification. Doing so violates the Radio Law
●● To prevent unlawful modification, the product has been designed so that it cannot be
easily disassembled. Modifying the product is prohibited by the Radio Law.
■■ Touch Panel
■■ Backup content on the product
●● Use your finger to operate the touch panel. Do not use ballpoint pens, pencils, or other
sharp-pointed objects. Using such objects does not only hinder correct operation of
the touch panel, but also might cause scratching or damage to the display.
●● Please back up* important content recorded or downloaded for the product to an
outside source. Content recorded to memory on the product sometimes disappears
or is altered by unexpected factors, such as static electricity or a fault, repair,
mishandling, etc.
●● Do not put stickers or sheets (e.g. commercially available protective films, peep
prevention sheets) on the display. Doing so might cause improper reaction of touch
panel.
●● Do not operate the touch panel with fingernails. Doing so might result in split nails or
jammed fingers.
●● If the display surface is dirty or wet with sweat or water, it may not function correctly.
In such case, wipe the display surface with a dry, soft cloth.
●● When carrying the product in your pocket or bag, take care not to put the touch panel
close to metals or other conductive materials, as it might cause false operation of the
touch panel.
■■ Battery pack
●● Use in very hot or cold environments, for example, when left in a car with the windows
closed in summer, will cause the battery pack capacity to drop and shorten the
available battery usage time. This will also shorten the battery pack service life. Try to
use the battery pack as far as possible at room temperature.
●● Charge the battery before using the product for the first time after purchase, or if you
have not used the product for a long time.
●● The battery pack is a consumable item. If the performance does not recover after
charge, the built-in is at the end of its service life, so stop using it. Because the
battery is a built-in type, an au shop will accept holding over and repair for a charge.
You may not use the product for a certain period. Please be forewarned. The life time
of the internal battery depends on the usage etc.
●● Contents saved in the product, such as contacts, mails and favorites, might be altered
or lost in an accident, fault, repair or mishandling. Be sure to keep a copy of important
contents. Note that Company assumes no responsibility for any damages or lost
profits resulting from altered or lost contents.
●● The built-in batteries sometimes swell up as they approach the end of their service
life. This is due to the properties of lithium polymer batteries, and is not a problem in
terms of safety.
●● Note that contents (both charged or free content) saved with the product cannot be
returned to the customer when it is replaced for repair of a fault, for example.
●● When not using the specified charging equipment (sold separately), remove the AC
adapter's power plug from the power outlet or cigarette lighter socket.
●● The product uses liquid crystal for its display. The display response speed may
become slow when the ambient temperature is low, which is due to the property of
liquid crystal and not a malfunction. The display response speed will return to normal
at room temperature.
●● Do not wrap the cord of the specified charging equipment (sold separately) around the
adapter itself. Doing so might cause electric shock, fault, injure, overheating or fire.
●● Although the display used on the product is made using high-precision technology,
some pixels (dots) might be lit or out at all times. Note that this is not a malfunction.
●● Take care not to inconvenience people around you when you use the product in a
public place.
●● You are recommended to store copies of individual data such as photos you took,
videos and music on your PC by sending each file as mail attachment, etc. Note,
however, that you may not be able to make copies of any copyrighted data even by the
above mentioned means.
●● Take care not to place magnetized items such as magnetic cards, speakers and TV
sets near the product, as it might cause malfunction.
Putting a strong magnetism close to the product might cause false operation.
●● When you put the product in your pocket or bag, take care so that the display does
not come in contact with metal objects or other hard objects. Doing so might cause
scratching or damage. Also, be careful not to scratch or damage the display by using a
strap whose metal or other hard part comes in contact with the display.
●● When suddenly brought into a warm place from a cold place, or when in a humid
location, or when used where temperature suddenly changes such as near the air
discharge port of an air conditioner, water droplets (i.e. condensation) sometimes form
inside the product. Note that when used under conditions such as this, the humidity
might cause corrosion or a fault.
●● When wiping the display, wipe with a soft, dry cloth. Use of a moistened cloth, glass
cleaner or other similar liquid might cause a fault.
●● When connecting/disconnecting the external device to/from the connection terminal
or the earphone terminal, make sure that the connector of external device is straight
with the connection terminal.
●● Note that applying unnecessary force with the connection terminal or the earphone
terminal connected to the external device might cause damage.
●● Do not discard this product together with regular trash. Please cooperate in the
collection of the product when it is no longer needed to protect the environment and
effectively use resources. Old product are collected at au shops and other places.
●● Do not insert a card other than microSD memory card into the microSD memory card
slot on this product.
●● Do not exert excessive force when attaching/removing a microSD memory card. Doing
so might injure your hands or fingers.
●● While writing/reading data to/from a microSD memory card, do not subject the product
to vibration or impact or turn off the power. Doing so might cause loss of data or a
fault.
●● When hearing the other party's voice, make sure that the earpiece is placed at the
center of your ear. If the earpiece (audio output port) is closed by the ear lobe, it may
be hard to hear the voice.
●● Even if you cover the microphone to make your voice inaudible to the other party, the
other party can hear your voice.
●● Sound from speaker may be very loud when you use hands-free calling. Keep it away
from your ear when using it.
●● Do not peel off the black sheet on the back cover (the back part you can see when
removing the back cover). Doing so might make it impossible for NFC/FeliCa data
recognition.
●● When you put a sticker, etc. on the proximity sensor, the sensor will malfunction and
indications on the display will turn off at all times while receiving or making a call. In
this case, note that you may not be able to operate the product.
■■ Charging equipment
●● Do not forcibly bend the charging equipment's plug or the connection between
the connector and power cord. Doing so might cause electric shock, fault, injure,
overheating or fire.
■■ au Nano IC Card (LTE)
●● The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage, the card will
be replaced at your expense. When a malfunction is suspected, or in case of theft or
loss, contact an au shop or PiPit.
●● Do not forcibly remove or insert the au Nano IC Card (LTE). Be careful not to exert
excessive force when inserting the card into your au cell phone.
●● You are responsible for any damage caused by inserting your au Nano IC Card (LTE)
into some other IC card reader/writer, etc.
●● Keep the IC (metal) part of your au Nano IC Card (LTE) clean. Wipe the card with a dry,
soft cloth (such as for cleaning eyeglasses) for cleaning.
●● Do not put stickers, etc. on the au Nano IC Card (LTE).
■■ LG TV antenna cable 01
●● LG TV antenna cable 01 is not covered by the warranty.
■■ Camera
●● When using the camera, follow common rules of etiquette regarding camera use.
●● Image data might be altered or lost due to malfunction, repair or mishandling of the
product. The Company takes no responsibility for the recovery of altered or lost data,
the damages resulting from altered or lost data, and lost profits.
●● When photographing important occasions (such as a wedding), take a trial shot and
check the shot image make sure it is correctly shot.
●● Do not use the camera for recording commercially available books or information of
which photographing is not allowed.
●● Do not leave the camera lens exposed to direct sunlight. Imaging elements might be
discolored or burnt.
■■ Music, videos and TV
●● Do not listen to music or watch videos or TV while driving a car or motorbike, or riding
a bicycle. Use of cell phones while driving a car or motorbike is prohibited by law. (Use
of cell phones while riding a bicycle may also be punishable by law.) In addition, stay
alert to the traffic around you even when walking. Surrounding sounds may not be heard
clearly, and gazing at the screen might distract your attention causing a traffic accident.
Be especially careful at railroad crossings, on a platform, and at pedestrian crossings.
●● Take care not to listen at ear-splitting volume for a long time, as it might affect
hearing.
●● Be careful of sound leakage from earphones in trains or other places with many people
around you.
■■ Copyrights and rights of portrait
●● You are not allowed to copy, distribute, publish, modify or edit the data you shot,
recorded or downloaded using the product without the consent of the copyright holder,
except for personal use, under the copyright law.
In addition, do not use or modify portraits or names of other individuals without their
consent, as it might infringe on rights of portrait.
Note that shooting and recording may be restricted at some live performances, shows
and exhibitions even for personal use.
●● Be careful about the copyright and portrait right when posting photos you shot, etc.
on Internet homepages.
* How to make backups: Store important data such as contacts data, music,
shot photos and videos on microSD memory cards. You can also send
files as mail attachment or transfer to your PC. Note, however, that there
are some data that cannot be copied by using these means. Please be
forewarned.
Available Security Codes
*3 IP6X equivalent means that the product will securely maintain its function of no grit
and dust getting inside the main unit even after it has been placed in an apparatus
with grit and dust of diameters of 75 μm or less and shaken for 8 hours.
Since operation of the product on each usage scene was confirmed based
on the above assumption, proper operation of the product in every possible
condition during actual use is not guaranteed. Malfunctions determined to be
caused by mishandling by the customer are not covered by the warranty.
■■ Important items to remember before use
●●For waterproof/dustproof, close the back cover tightly by pressing
the cover along the lines below. And, close au Nano IC Card (LTE)
tray and microSD memory card slot cover tightly too.
The product has various security codes that you can use.
The available security codes are as follows. Do not forget the various security codes that
are set as they are necessary for various operations and contracts.
a To do remote operation of voice mail and call forwarding
services from a landline phone
b To use Customer Service Center and to do various inquiries,
applications, and modifications on the au homepage
Initial value A four digit number chosen by the customer and noted on the application
form
Example of
usage
To prevent unauthorized use of the au Nano IC Card (LTE) by third parties
Initial value 1234
• Waterproofness/dustproofness is only effective when the covers are securely closed.
• Just a small particle (a hair, etc.) on the seals can cause water leak.
●●Do not immerse the product in water with soap, detergent or bath
salts in it.
Soap/Detergent/Bath salts
●●Do not immerse the product in seawater, a swimming pool or hot
spring.
Privacy Protected Function
The function shown below is installed in the product to protect the privacy of the saved data.
Function
Screen lock
Description
Set Swipe, Face Unlock, Knock Code, Pattern, PIN, or Password to secure
data when turning on the phone or when unlocking the screen.
PIN Code
■■ PIN code
To prevent unauthorized use of the au Nano IC Card (LTE) by a third party, you can set
the product to require PIN code entry every time the power is turned on. You also need to
enter PIN code when setting whether the PIN code entry is required.
If the PIN code is incorrectly entered three times consecutively, the PIN code will be
locked. You can unlock the PIN code using PUK code.
• Entering PIN code is not required by default state. In "Lock SIM card", however, you can
change the setting requiring to enter PIN code. 
Also, PIN is required when setting "Lock SIM card".
• The preinstalled PIN was set to "1234". You can change PIN code to any four- to eightdigit number in "Change SIM PIN" if necessary.
■■ PUK code
In case the PIN code is locked, you can unlock it by entering the PUK code.
• PUK code is an eight-digit number given at the time of purchase, which is printed on
the back side of the plastic card on which your au Nano IC Card (LTE) is attached.
• After entering the PUK code, you need to set a new PIN code in "Change SIM PIN".
• If the PUK code is incorrectly entered 10 times consecutively, contact an au shop,
PiPit or Customer Service Center.
memo
• If PIN is locked, the product may restart to protect its security.
• "PIN code" is not reset by Factory data reset.
Notes on waterproof and dustproof properties
This product has a waterproof property equivalent to IPX5*1 and IPX7*2,
as well as a dustproof property equivalent to IP6X*3 on the condition
that the back cover, au Nano IC Card (LTE) tray and microSD memory
card slot cover are securely attached (based on in-house testing).
Specifically, you can make calls holding the product with wet hands in the
rain (less than 20 mm per hour) without an umbrella, as well as use the
product in a place with water such as a bathroom or kitchen. Before using
the product, thoroughly read“Important items to remember before use”and
“Tips for comfortable use”to ensure correct use. Failure to follow the contents
described in these sections may cause the intrusion of water, sand or other
foreign material, resulting in overheating, fire, electric shock, injury or a fault.
*1 IPX5 equivalent means that the product will maintain its operability as a phone even
if it is sprayed with water from a 6.3mm diameter nozzle at a distance of about 3
meters for more than 3 minutes at a rate of about 12.5 liters per minute from any
direction.
*2 IPX7 equivalent means that the product will maintain its operability as a phone with
no water getting inside the main unit even if it is gently submerged in a tank of still
tap water at room temperature to a depth of 1 meter for about 30 minutes.
• If condensation occurs inside the display, leave the product at room temperature for a
while until the condensation is cleared.
c Cover the power key and volume key with a towel, cloth, etc. and
press each key two to three times.
d Wipe the moisture coming out from inside with a dry towel, cloth,
etc.
• Do not splash the product with hot water. The product is not resistant to hot
temperatures.
Seawater
Hot spring
●●Do not immerse the product in any liquid (alcohol, etc.) other than
water.
●●Do not place the product directly on the sand at a beach, etc. Sand
or other small particles might get inside the earpiece, microphone
or speaker, causing the volume to drop. If sand gets inside the
product’s main unit, it might cause overheating or a fault.
Sand/Mud
●●Do not use the product underwater.
●●Do not leave the product in a humid place such as a bathroom or
kitchen for an extended period of time.
■■ Tips for comfortable use
• Once the product gets wet, water may remain in gaps of the main unit. Shake the
product well to drain water. Especially make sure to drain water remaining in the hinge
part, back cover and key parts.
• Even after water is drained, the inner parts might be still wet. Although you can use the
product, do not place it near things that must not get wet. Take care not to wet your
clothes, bag or contents of the bag.
• Drain water if it becomes temporarily hard to hear the sound due to water remaining in
the microphone or earpiece.
■■ Notes on various usage scenes
In the rain: You can make calls holding the product with wet hands in the rain without an
umbrella.
• The rain in this case means a moderately-heavy rain (less than 20 mm per hour).
• Water drops on the display might cause errors in the touch panel operation.
• Never open/close the external connection terminal cover or back cover if the product
is exposed to rain, or your hands are wet.
In the shower: You can make calls holding the product with wet hands while taking a
shower.
• Avoid spraying the product with high-pressure water, as the product is not designed to
withstand high water pressure.
Washing: You can wash the product under a mild flow (up to 6 liters per minute) of tap
water at room temperature (5℃ to 35℃ ) at a distance of about 10 cm from the faucet or
showerhead.
• Do not spray the product with high-pressure water or submerge it in water for extended
periods of time, as the product is not designed to withstand high water pressure.
• Make sure that the back cover is tightly closed, and holding the external connection
terminal cover so that it does not open, wash the product with your hands. Do not use
a brush or sponge.
• Do not wash the product in a washing machine or ultrasound bath.
• Do not splash the product with or immerse it in soap water, detergent water, etc. other
than tap water.
• Do not immerse the product in or splash it with boiling water. The product is not
resistant to hot temperatures.
• Do not place the product where it gets extremely hot or cold such as near a stove or in
a refrigerator.
■■ Common precautions
• Back cover
Make sure that the back cover is securely attached. Just a small particle (a hair, etc.)
on the seals can cause water leak.
Do not attach/remove the back cover with gloved hands. Just a small particle (a hair,
etc.) on the seals can cause water leaks. Wipe off any minuscule droplets of water or
dirt with a clean dry cloth before closing the covers.
If the back cover is deteriorated or damaged, the waterproof/dustproof property
becomes ineffective. In such case, contact an au shop near you or Keitai Guarantee
Service Center.
• If any liquid other than plain water gets on the product
If any liquid other than plain water (e.g. seawater, detergent, alcohol) gets on the
product, immediately rinse it with plain water.
You can wash the product under a mild flow (up to 6 liters per minute) of tap water
at room temperature (5 ℃ to 35 ℃ ) at a distance of about 10 cm from the faucet or
showerhead.
If the product gets dirty, instead of using a brush, wash it with your hands holding the
back cover and external connection terminal cover so that they do not open.
• After the product gets wet
After the product gets wet, drain water, and wipe the main unit and the back cover with
a clean dry cloth without removing the back cover.
In cold climates, water on the main unit may turn to frost. Using the product with
frost may cause a fault. Do not leave the product without wiping off water. (No special
measures against condensation have been implemented in this product.)
• Rubber seals
Rubber seal in au Nano IC Card (LTE) tray and microSD memory card slot cover plays
an important part in waterproof/dustproof property.
Do not damage or remove the rubber seals. Take care not to get the rubber seals
caught when closing au Nano IC Card (LTE) tray and microSD memory card slot cover.
Forcibly closing the cover with the rubber seals caught may damage them resulting in
loss of waterproof/dustproof property. Just a small particle (a hair, etc.) on the seals
can cause water leak. If any liquid other than plain water (e.g. alcohol) gets on the
rubber seals, it may cause deterioration in durability.
Do not insert the sharp pointed object in au Nano IC Card (LTE) tray or microSD
memory card slot cover. Doing so might damage or deform the product or damage the
rubber seals, causing water leak.
When attaching back cover, confirm if au Nano IC Card (LTE) tray and microSD memory
card slot cover are attached firmly.
It is recommended to replace the parts for maintaining waterproof/dustproof property
once every two years regardless of whether any abnormality is present. For information
on part replacement, contact an au shop nearby.
• Charging
Never charge the battery if the main unit is wet.
The supplied and optional accessories are not waterproof/dustproof.
• Waterproof property
Do not use the product in places where it may be sprayed with high-pressure water (e.g.
near a faucet or showerhead) or submerge it in water for extended periods of time, as
the product is not designed to withstand high water pressure. Also, do not expose the
product to a water flow stronger than the specified flow rate (i.e. 6 liters per minute
from a faucet or showerhead, at which you might even feel pain in the skin). Doing so
might cause a fault, even though the product has a waterproof property equivalent to
IPX5. Do not wash the product in a washing machine or ultrasound bath.
This product does not float on water.
• Heat resistance
Do not use the product in places where boiling water may splash on it, in saunas or
near hot air (e.g. hairdryer). The product is not resistant to high temperatures.
• Shock
This product is not resistant to shock. Do not drop the product or subject it to shock.
Also, do not jab the earpiece, microphone or speaker with a cotton swab or any sharp
object. Doing so might damage or deform the main unit causing water leak.
■■ Draining water after wetting the product  
As some parts of this product are not watertight, if you use the product after it gets wet,
water remaining in those parts might wet your clothes or bag, or the sound might become
hard to hear.
Follow the steps below to drain water.
a Carefully wipe the moisture off the main unit with a dry towel, cloth,
etc.
• Wireless LAN (Wi-Fi®) has the advantage that it can be freely connected anywhere
within the radio wave range, as it uses radio waves for exchanging information. At the
same time, there is a risk that a malicious third party may obtain unauthorized access
if security settings have not been configured. You are recommended to configure
security settings before using wireless LAN at your decision and responsibility.
• The Company assumes no responsibility for leakage of data or information that may
occur during Bluetooth®/wireless LAN (Wi-Fi®) communication.
• Since Bluetooth® and wireless LAN (Wi-Fi®) functions use the same frequency band,
using the both functions at the same may cause radio wave interference resulting in
decreased communication speed or disconnection from the network. If connection fails,
stop using either of the Bluetooth® and wireless LAN (Wi-Fi®) functions.
Bluetooth® and wireless LAN (Wi-Fi®) functions of this product use frequencies in the 2.4
GHz band.
2.4FH1/DS4/OF4
• Bluetooth® function: 2.4FH1
This product uses the 2.4 GHz band. FH-SS is used as the modulation scheme. The
interference distance is about 10 m or less.
• Do not splash the product with or immerse it in soap water, detergent water,
seasonings, juices, etc. other than tap water.
●●Lock No. (NFC/Osaifu-Keitai lock)
Lock No. (NFC/Osaifu-Keitai lock)
• Extreme changes in temperature cause condensation. Wait until the main unit reaches
room temperature before you bring the product from a cold place into a warm bathroom.
When shaking the product, confirm the safety around you and hold it firmly so
as not to drop it.
In the kitchen: You can use the product in the kitchen and other places where water is
used.
Initial value 1234
Example of
usage
• Do not immerse the product in hot spring water, soap water, detergent water, or water
with bath salts in it. Also, do not use the product underwater. Doing so may cause a
fault.
of the arrow shown in the figure until water drops no longer fly off.
• Do not bring LG TV antenna cable 01 into a bathroom.
• Do not open/close the external connection terminal cover or back cover if the main unit or your
hands are wet.
●●PIN code
• Do not use the product in a bathroom for an extended period of time. The product is
not moistureproof.
b Hold the product firmly and shake it about 20 times in the direction
• Do not bring the Smart phone Cradle (sold separately) into a bathroom.
●●Security code
Example of
usage
In the bath: You can use the product in a bathroom. Although you can make calls with
wet hands, do not immerse the product into a bathtub. The product is not resistant to hot
temperatures.
• Wireless LAN (Wi-Fi®) function: 2.4DS/OF4
This product uses the 2.4 GHz band. DS-SS and OFDM are used as the modulation
schemes. The interference distance is about 40 m or less.
e Place it on a dry towel, cloth, etc. and let it dry at ambient
temperature. (Around 30 minutes)
If it is not fully dried, the sound may become hard to hear. Let it fully dry before
use.
■■ Precautions on charging
The supplied and optional accessories are not waterproof/dustproof. Be sure to check the
following points before and after charging.
• Never charge the battery if the main unit is wet. Doing so might cause electric shock
or short circuit resulting in a fire, burns or a fault.
• Check that the main unit is not wet. If you are charging the battery just after the product
gets wet, drain water well and wipe remaining water off with a clean dry cloth before
connecting it to the specified charging equipment (sold separately).
• Do not touch the specified charging equipment (sold separately) with wet hands. Doing
so might cause electric shock.
• Do not splash water over the specified charging equipment (sold separately) when
using them. Do not use them near water such, as in a bathroom, shower room, kitchen
or washroom. Failure to do so might cause fire, electric shock, injure or a fault. Do not
bring them into a bathroom, etc. even when you are not charging with them. Failure to
do so might cause fire, electric shock, injure or a fault.
• Available channels differ depending on the country.
• For use in an airplane, check with the airline company in advance.
5GHz Frequency Band Precautions
Wireless LAN (Wi-Fi®) function of this product uses 5 GHz band.
Using the 5.2 GHz band and 5.3 GHz band outdoors is prohibited
by the Radio Law.
The channels used on the product are as follows.
■■ HT20
IEEE802.11 b/g/n
IEEE802.11 a/n/ac
W52
W53
W56
W52 (5.2 GHz band/36, 40, 44, 48 ch)
W53 (5.3 GHz band/52, 56, 60, 64 ch)
W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch)
■■ HT40
W52 (5.2 GHz band/38, 46 ch)
W53 (5.3 GHz band/54, 62 ch)
W56 (5.6 GHz band/102, 110, 118, 126, 134 ch)
■■ HT80
W52 (5.2 GHz band/42 ch)
W53 (5.3 GHz band/58 ch)
W56 (5.6 GHz band/106, 122 ch)
Notes on Packet Communication Charge
Bluetooth®/Wireless LAN (Wi-Fi®) Function
• The Bluetooth function and the wireless LAN (Wi-Fi ) function of this product
conforms to the domestic standards of Japan, FCC standards, and EC directives, and
has been certified.
®
• Bandwidth to use: Full band
This means that full band can be used, and that band of mobile unit identification devices
can be avoided.
®
• The 2.4 GHz band used by wireless LAN (Wi-Fi®) and Bluetooth® devices is shared
by various other devices. For this reason, the communication speed and connectable
range may be decreased, or disconnection may occur, due to interference from other
devices.
• Do not use this product in places where electromagnetic waves are generated or near
electric products, AV and OA equipment, or other magnetized devices.
• Subjecting this product to magnetic or electrical noise might increase noise and
prevent it from performing communications. (This product is particularly susceptible to
noise when it used near a microwave oven.)
• Using this product near a TV, radio or similar appliance might cause reception
interference and disrupt TV images.
• The searching might not be successful if there are multiple wireless LAN (Wi-Fi )
access points near to the product or the same channel is being used.
®
• The wireless LAN function cannot be used in airplane. Be sure to turn off the power even
in a wireless LAN (Wi-Fi®) compliant airplane. Some airline companies, however, allow their
passengers to use cell phones. For details, contact the airline company you use.
• The communication speed and connectable range vary depending on the distance
between communication devices, obstacles and the devices to connect.
2.4 GHz Frequency Band Precautions
The frequencies used by the Bluetooth® and/or wireless LAN (Wi-Fi®) function of this
product are in the 2.4 GHz band. In this frequency band, other similar wireless stations,
in-plant wireless stations for mobile unit identification that require a license to use, such
as factory production lines, specific small power wireless stations that do not require
licenses, amateur wireless stations (collectively called "other wireless stations" from
here on) are operated in addition to home electrical appliances such as microwave ovens,
devices for industrial, scientific and medical devices.
1. Before using the product, make sure that "other wireless stations" are not in
operation nearby.
2. In the event that instances of radio wave interference have occurred between this
product and "other wireless stations", immediately either relocate this product or
stop operation of the device (stop the emission of radio waves).
3. If you are unclear on any points or are troubled by anything, contact an au shop
or Customer Service Center.
memo
• The connections between this product and all other Bluetooth® and wireless LAN (WiFi®) devices have not been confirmed. Therefore, connections with all Bluetooth® and
wireless LAN (Wi-Fi®) devices have not been confirmed.
• This product supports security features for wireless communications that are compliant
with the Bluetooth® and wireless LAN (Wi-Fi®) standard specifications, but the security
may not be sufficient depending on the usage environment and configuration. Be careful
when making data communication using Bluetooth® or wireless LAN (Wi-Fi®) function.
• Since a constant Internet connection is possible with the product, packet
communication may be performed automatically by some applications, resulting in high
packet communication charges.
Therefore, subscription to a packet communication charge discount service or flat late
plan is recommended.
• On the product to browse websites, download applications, communicate using
applications, send/receive e-mails, and configure various settings, connection to the
Internet is required, to which packet communication charge applies.
* Packet communication charge does not apply to wireless LAN (Wi-Fi®) connection.
Applications
• Be sure to check the security of the application, then install it at your own risk. Some
applications might cause virus infection, damage various data, and send out your
location information, usage history or personal information stored in your cell phone via
the Internet.
• The Company assumes no responsibility for any operation problems that might be
caused by the applications you have installed. In such case, you may be charged a
repair fee even during the warranty period.
• The Company assumes no responsibility for any disadvantage brought to you or any
third party by applications you have installed.
• Depending on applications, microSD memory card is required when using the
application.
• Some applications prohibit the product from entering sleep mode while they are active,
or rapidly drain the battery while running in the background.
• Operational procedures and screen appearances of the applications preinstalled in the
product and those installed by you are subject to change without notice as a result of
version upgrade. In addition, operating procedures described in this manual may differ
from the actual procedures.
Specific Absorption Rate (SAR) of Cell Phones
This model LGV32 mobile phone complies with Japanese technical regulations and
international guidelines regarding exposure to radio waves.
This mobile phone was designed in observance of Japanese technical regulations
regarding exposure to radio waves* and limits to exposure to radio waves recommended
by a set of equivalent international guidelines. These international guidelines were set out
by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), which is in
collaboration with the World Health Organization (WHO), and the permissible limits include
a substantial safety margin designed to assure the safety of all persons, regardless of
age and health condition.
The Japanese technical regulations and international guidelines define the limits using
a unit of measurement known as the Specific Absorption Rate (SAR), which represents
the average amount of radio frequency energy absorbed by the human. The SAR limit for
mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone when tested for
use at the ear is X.XXXW/kg. The highest SAR value for this mobile phone when tested
for use on the body is X.XXXW/kg. There may be slight differences in SAR levels among
individual products, but they all satisfy the limit.
The actual SAR of this mobile phone while talking on the phone can be well below that
indicated above. This is due to automatic changes in the power level of the mobile phone
to ensure it only outputs the minimum power required to communicate with a base
station. Therefore in general, the closer you are to a base station, the lower the power
output of the mobile phone.
This mobile phone can be used in positions other than against your ear. Use an accessory
such as a carrying case, etc. so that you can hold the product at least 1.5 cm away
from your body and also do not contain metal parts between the product and your body.
By doing this, this mobile phone complies with Japanese technical regulations and
international guidelines regarding exposure to radio waves.
The World Health Organization has stated that present scientific information does not
indicate that use of mobile devices has any harmful effects on the human body. They
recommend that if you are still worried about your exposure then you can limit your talk
time or use a handsfree kit to keep the mobile phone away from your head and body.
If you would like to know more detailed information, please refer to the WHO website.
http://www.who.int/docstore/peh-emf/publications/facts_press/fact_english.htm
Please refer to the websites listed below if you would like to know more detailed
information regarding SAR.
○ Ministry of Internal Affairs and Communications Website:
http://www.tele.soumu.go.jp/j/ele/index.htm
○ Association of Radio Industries and Businesses Website:
http://www.arib-emf.org/index02.html (in Japanese only)
○ au Website:
http://www.au.kddi.com/
○ LG Electronics Inc. Website:
Refer to "Specifications" page of this product.
http://www.lg.com/jp/mobile-phone (in Japanese only)
(URL are subject to change without notice.)
* Technical regulations are defined by the Ministerial Ordinance Related to Radio Law
(Article 14-2 of Radio Equipment Regulations).
Declaration of Conformity
The product "LGV32" is declared to conform with the essential requirements of European
Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive
3.1(a), 3.1(b) and 3.2.
This mobile phone complies with the EU requirements for exposure to radio waves.
Your mobile phone is a radio transceiver, designed and manufactured not to exceed the
SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested
for compliance against the standard was X.XXX W/kg at the ear, and X.XXX W/kg when
worn on the body. To comply with the RF Exposure limits a distance of greater than 1.5
cm must be maintained from the user's body.
While there may be differences between the SAR* levels of various phones and at various
positions, they all meet*** the EU requirements for RF exposure.
*The exposure standard for mobile phones employs a unit of measurement known as the
Specific Absorption Rate, or SAR.
**The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg)
averaged over ten grams of tissue, recommended by The Council of the European Union.
The limit incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
***Tests for SAR have been conducted using standard operating positions with the phone
transmitting at its highest certified power level in all tested frequency bands. Although
the SAR is determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is because the phone
is designed to operate at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a base station antenna, the lower
the power output.
European Union Directives Conformance Statement
Hereby, LG Electronics Inc. declares that this product is in compliance with:
• The essential requirements and other relevant provisions of Directive 1999/5/EC
• All other relevant EU Directives
The above gives an example of a typical Product Approval Number.
Wi-Fi(WLAN) This device is intended for sale in Japan only.
This equipment may be operated in all European countries.
The 5150 - 5350 MHz band is restricted to indoor use only.
Important Safety Information
AIRCRAFT
Switch off your wireless device when boarding an aircraft or whenever you are instructed
to do so by airline staff. If your device offers a 'flight mode' or similar feature consult airline
staff as to whether it can be used on board.
DRIVING
Full attention should be given to driving at all times and local laws and regulations
restricting the use of wireless devices while driving must be observed.
HOSPITALS
Mobile phones should be switched off wherever you are requested to do so in hospitals,
clinics or health care facilities. These requests are designed to prevent possible
interference with sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use of wireless devices or other radio equipment
in locations with flammable material and chemicals. Switch off your wireless device
whenever you are instructed to do so by authorized staff.
INTERFERENCE
Care must be taken when using the phone in close proximity to personal medical devices,
such as pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 15 cm be
maintained between a mobile phone and a pacemaker to avoid potential interference with
the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and
do not carry it in a breast pocket.
Hearing Aids
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA) website at http://ctia.org/.
Export Administration
Regulations This product and its accessories may fall under the category of application of
Japan Export Control Regulations ("Foreign Exchange and Foreign Trade Law" and relevant
laws and regulations). U.S. Re-export Regulations (Export Administration Regulations) is
applied to this product and its accessories. If you export or re-export this product or its
accessories, please follow the necessary procedures at your own risk and expense. For
details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S.
Department of Commerce.
Trademarks
• This product has been granted the licenses which code (i) AVC standard compliant
video (hereinafter stated as AVC video) based upon the AVC Portfolio License for
the individual use of customers, and non-commercial use, and/or the licenses which
decode (ii) VC-1 video. (this is restricted to the AVC video that has been coded
by customers who are not engaged in individual, and commercial activities, and/
or pertains to the provision of coded AVC video from video providers who have been
granted the licenses). For any other purposes, licence is not permitted even for the
implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to
http://www.mpegla.com
All company names and product names in this manual are
either trade marks or registered trade marks.
• The microSD logo, microSDHC logo, and microSDXC
logo are trademarks of SD-3C, LLC.
NOTE :
• Wi-Fi is registered trademark of Wi-Fi Alliance .
For other Medical Devices :
Please consult your physician and the device manufacturer to determine if operation of
your phone may interfere with the operation of your medical device.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:  (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help and for additional
suggestions.
Warning
The user is cautioned that changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
FCC RF Exposure Information
This model phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests
are performed in positions and locations (e.g., at the ear and worn on the body) as required
by the FCC for each model.
The SAR value for this model handset when tested for use at the ear is X.XX W/kg and
when worn on the body, as described in this user guide, is X.XX W/kg.
Body-worn Operation
This phone was tested for typical body-worn operations with the back of the phone kept
at a distance of 10 mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 10 mm separation distance between your
body and the back of the phone. The use of belt clips, holsters and similar accessories
should not contain metallic components.
The use of accessories that do not satisfy these requirements may not comply with FCC
RF exposure requirements, and should be avoided.
The FCC has granted an Equipment Authorization for this model handset with all reported
SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR
information on this model handset is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID
ZNFV32.
• Playing MPEG-4 Videos recorded personally by consumers not engaged in profit
activities
• Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA
• Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth® SIG, INC. LG Electronics Inc. have the rights of using
the above trademarks.
 o prevent possible hearing damage, do not listen at high volume levels for
long periods.
• Recording videos that are compliant with the standard of MPEG-4 Visual (hereinafter
referred to as MPEG-4 Video)
Intellectual Property Right
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid manufacturer to discuss
alternatives.
Excessive sound pressure from earphones and headphones can cause
hearing loss.
Others
For software installed in this product or part of the installed software,
you are not allowed to change, translate or adapt, reverse, engineering,
decompile, reverse assemble them, or do anything related to the above.
This product is licensed complying with the MPEG-4 Visual
Patent Portfolio License. If you use it for private purpose without
any profits, you are allowed to use them only when:
®
®
• Google, the Google logo, Android, the Android logo, Google Play, the Google Play logo,
Google Talk, Gmail are trademarks of Google, Inc.
• iWnn of OMRON SOFTWARE CO., Ltd. is used for conversion methods for Japanese
language.
iWnn© OMRON SOFTWARE Co., Ltd. 2008-2014 All Rights Reserved.
• "Jibe" is a trademark of Jibe Mobile K.K.
• FeliCa is a contactless IC card technology developed by Sony Corporation.
FeliCa is a registered trademark of Sony Corporation.
•
is a registered trademark of FeliCa Networks, Inc.
• GREE and the GREE logo are registered trademarks of GREE, Inc. in Japan. All other
trademarks are the property of their respective owners.
• Rovi, G-GUIDE, G-GUIDE MOBILE and G-Guide related logos are trademarks registered
trademarks of Rovi Corporation and/or its subsidiaries in Japan.
• Copyright © 2010- Three Laws of Mobility. All Rights Reserved.
• Twitter is a trademark of Twitter, Inc., and is used under license.
• Facebook and Facebook logo are trade marks or registered of Facebook, Inc.
• "mixi" and "mymixi" are trademark and/or registered trademark of mixi, Inc.
• "TRENDMICRO", " ウイルスバスター " Copyright © 1989-2011 Trend Micro Incorporated.
All rights reserved.
• The product includes pictograms licensed by NTT DOCOMO, INC.
• Manufactured under license from DTS, Inc. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks & DTS 2.0 is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
• All other company names and product names are trademarks or registered trademarks
of respective companies referred to in this manual.
OpenSSL License
【OpenSSL License】
Copyright © 1998-2011 The OpenSSL Project. All rights reserved.
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/)
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ''AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
【Original SSLeay License】
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
For further utilizing such as promotion, in-house use or profitmaking business, please contact MPEG LA, LLC in U.S.
• This product has been granted the licenses which code (i) VC-1 standard compliant
video (hereinafter stated as VC-1 video) based upon the VC-1 Patent Portfolio License
for the individual use of customers, and non-commercial use, and/or the licenses
which decode (ii) VC-1 video. (this is restricted to the VC-1 video that has been coded
by customers who are not engaged in individual, and commercial activities, and/or
pertains to the provision of coded VC-1 video from video providers who have been
granted the licenses). For any other purposes, licence is not permitted even for the
implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to
http://www.mpegla.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:04:03 13:15:56+09:00
Modify Date                     : 2015:04:09 17:23:04+09:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:04:09 17:23:04+09:00
Format                          : application/pdf
Document ID                     : uuid:bb1275f2-c905-4c0f-91b3-1837badf1856
Instance ID                     : uuid:6be79848-5209-4913-a8dc-969de1c749a6
Page Count                      : 3

EXIF Metadata provided by EXIF.tools