LG Electronics USA VX3300 Tri-Mode Quad-Band Analog/ PCS Phone User Manual
LG Electronics USA Tri-Mode Quad-Band Analog/ PCS Phone Users Manual
UserManual.wiki
>
LG Electronics USA
>
VX3300 User Manual
>
Users Manual
Contents
1.
Users Manual
2.
Users Manual Supplement
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![- 3 - (10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 4. HOW TO GET WARRANTY SERVICE: To obtain warranty service, please call the following telephone number from anywhere in the continental United States: LG Infocomm Inc. 201 James Record Road Huntsville, AL 35824 Tel. 1-800-793-8896 Fax. 1-800-448-4026 www.lgeservice.com DO NOT RETURN YOUR PRODUCT TO THE ABOVE ADDRESS. Please call or write for the location of the LGIC authorized service center nearest you and for the procedures for obtaining warranty claims. ]](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-3.png)
![- 19 - numbers are sent when you press . If you select a 2-Second Pause, your phone automatically sends the next set of numbers after two seconds. To dial or save a phone number with pauses: 1.Enter the phone number. 2.Highlight or and press . Hard Pauses are displayed as a “P” and 2- Second Pauses as a “T.” 3.Enter additional numbers. 4.Highlight or and press . If you enter a Hard Pause, highlight Send Tones and press [OK] to send the next set of numbers. 4-Digit Dialing Enter four digits to display the 4-Digit Dialing option. If you select 4-Digit Dial, your phone dials the phone number in your Phone Book that ends with the four digits you entered. To use 4-Digit Dialing: 1.Dial the last four digits of an entry’s phone number. 2.Highlight 4-Digit Dial and press [OK]. Note: 4-Digit Dialing dials the first number in your Phone Book matching the four digits. In Call Options During a call, your phone displays menu options in addition to the Main Menu. Call 2- Second PauseHard Pause OKSave OK](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-19.png)
![- 20 - To select an option, Highlight it and press [OK].( functions ‘Send’ and ‘End’ only) End Call - Ends the call Send Tones - Sends the next set of numbers after a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses “ on the previous page.) Mute or Unmute – Select Mute to mute your phone’s microphone. Select Unmute to reactivate the microphone. Dial 3-Way Call – Lets you dial another phone number. Flash – Answers an incoming Call Waiting call or connects the third party for Three-Way Calling. Incoming Call Notification Depending on your settings, your phone notifies you of incoming calls in the following ways: The phone rings or vibrates The LED flashes green The backlight illuminates The screen displays an incoming call message The phone number of the caller is displayed of the phone number is available The caller’s name is displayed if the phone number is in your Phone Book The following options are also displayed. To select an option, highlight it and press [SEND]. Answer – answers the call. Silent Ringer – Mutes the ringer.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-20.png)
![- 21 - Note: You can also mute the ringer by pressing the up or down Volume Control key or [CLR]. Answering Calls To answer incoming Verizon Wireless calls, open the Flip (in Active Flip Mode) or press [SEND]. Note: If you open the Flip (in Active Flip Mode) and then press [SEND], you will hang up on the caller. To answer incoming roam calls, highlight Answer and press [SEND]. Missed Call Notification When an incoming call is not answered, the Missed Log and Caller ID information are displayed on your screen. To return to the Main Menu, press and hold [CLR]. To dial the number, press and hold [OK]. Note: You cannot dial phone numbers identified as No ID, Restricted, Data or Fax calls. End of Call Options After receiving or making a call to a phone number not in your Phone Book, the phone number (if the number is available), the duration of the call and End of Call menu options are displayed. To select an option, highlight it and press [OK]. OK – Returns to the Main Menu. (You can also press [CLR].) Call – Dials the number again. Save Phone # - Saves the phone number in your Phone Book. (See “Adding a New Entry” on page 43.) After receiving of making a call to a phone number in your Phone Book, the other party’s name and phone number, the duration of the call and the following menu options are displayed. To select an option, highlight it and press [OK]. OK – Returns to the Main Menu.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-21.png)
![- 22 - Call – Dials the number again Alternate #s – Displays the Phone Book entry (if the entry has alternate phone numbers). To dial an alternate number, highlight the phone number and press and hold [OK]. Data/Fax Calls The Sprint PCS SP-510 can send and receive data or fax transmissions using the optional Data Connectivity Kit. To purchase this accessory, visit a Sprint PCS Center, Dial [ # ] [A] [C] [C] from your Sprint PCS SP-510 , or dial 1-800-974-2221. For information on receiving data or faxes, see page 72. Internet Access For information on accessing the Internet from your phone, see “MiniBrowser” on page 61. Handy Tips Adjusting the Volume To adjusting the Ring Volume, press the up of down Volume Control keys in the Main Menu. The current Volume setting is displayed. To adjust the incoming Voice Volume, press the Volume Control keys up or down during a call. The current Volume setting is displayed. Displaying Your Phone Number(phone book – not functioning) To display your phone number: 1. From the Main Menu, highlight Phone Book and press [SEND]. 2. Highlight Phone # and press [SEND].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-22.png)
![- 23 - Changing the Backlight Setting The backlight illuminates when you press a key or receive an phone call. To change the backlight setting: 1.From the Main Menu, highlight Display and press [OK]. 2.Highlight Backlight and press [OK]. 3.Highlight 8 Seconds, 15 Seconds, 30 Seconds, Off or Always On and press [OK]. Note: Long backlight settings affect the battery’s talk and standby times. Editing the Greeting The Greeting is displayed above the time and date on the display screen (except during PCS CDMA of Analog Cellular Roaming). To edit the Greeting: 1.From the Main Menu, highlight Display and press [OK]. 2.Highlight Greeting and press [OK]. 3.Highlight Change and press [OK]. 4.To delete one character at a time, press [CLR]. To delete all characters, press and hold [CLR]. 5.Enter your new Greeting using the keypad. (See “Entering Characters Using the Keypad” on page 6.) 6.Highlight Save and press [OK]. Adjusting the Contrast To adjust the contrast setting:](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-23.png)
![- 24 - 1.From the Main Menu, highlight Display and press [OK]. 2.Highlight Contrast and press [OK]. 3.Highlight Highest, High, Medium, Low of Lowest and press [OK]. When you highlight an option, a preview of the Contrast setting is displayed. Creating a Phone Book Entry Your Sprint PCS SP-510 provides multiple ways to add phone numbers to your Phone Book. (For alternative ways, see “Saving a Phone Number” on page 14 or “Saving Phone Numbers From the Call Log” on page 35.) 1.From the Main Menu, highlight Phone Book and press [OK]. 2.Highlight Add New Entry and press [OK]. 3.Enter a name for the entry or highlight Save w/o Name and press [OK]. (See “Entering Characters Using the Keypad” on page 6.) 4.Enter the phone number and press [OK]. ☞Tip! If you save phone numbers with their area codes, you can still dial them from your Phone Book when you travel outside your Sprint PCS Home Service Area. 5.Select a label by highlighting Home, Work, Mobile, Pager, Fax, Data or No Label and pressing [OK]. Note: Phone numbers labeled Fax of Data can only be dialed through a personal computer. 6.Press [OK] to save the entry in the next available memory location. (You can also enter an entry number or highlight an empty location and press [OK]. Calling a Phone Number in Your Phone Book To Dial a phone number in your Phone Book: 1.Display a Phone Book entry. (See “Finding a Name” on page 40 or “Finding an Entry Number” on page](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-24.png)
![- 25 - 41.) 2.To speed dial the entry’s default number, press and hold [OK]. To dial an alternate number, highlight the number and press and hold [OK]. ☞Tip! To speed dial a Phone Book entry from the Main Menu, press and hold the entry’s number. If the entry number is two digits, enter the first digit, then press and hold the second digit. Setting the Ring Volume to Vibrate The vibrating ringer lets you receive incoming calls without disturbing others. To set the phone to Vibrate Mode, press the down Volume Control key until Ring Volume Vibrate is displayed. The phone will vibrate and – Vibrate On- is displayed above the Main Menu. Note: When the phone is in Vibrate Mode and attached to an accessory (Desktop Charger, Hands-Free Car Kit, etc.), it uses the Standard Ring Type to alert you of incoming calls. To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume” . Setting the FCC Test items 1. Press [Menu] + 0 + 0 + “000000” 2. Press ‘8’ key for entering FCC Test menu 3. Select one of 3 sub-menus (PCS FCC / CDMA FCC / AMPS FCC) 4. You can see ”Set Channel”, “AGC Control” 5. Select “Set Channel” and press OK. You can input Channel Number 6. Select “AGC Control” and press OK You can input AGC Control value](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-25.png)
![- 26 - Getting the Most From Service Accessing Sprint PCS Voicemail To speed dial your voicemail, press and hold [ 1 ]. Note: The phone number for your Sprint PCS Voicemail box is stored in the first Phone Book entry. If you edit the entry, this option may not work. To dial your voicemail from the Main, Menu, highlight Messages and press and hold [OK]. To access your voicemail from a phone other than your Sprint PCS : 1.Deal your Sprint PCS Phone Number. 2.When the voicemail system answers, press [ * ] and enter your pass code. Note: You are charged for air time when accessing your voicemail box. Setting Up Your Sprint PCS Voicemail Sprint PCS Voicemail allows callers to leave a message when you don’t answer your Sprint PCS SP-510. We suggest you set up your voicemail box soon after your phone is activated. The first time you access the voicemail system (see “Accessing Sprint PCS Voicemail” above) from your Sprint PCS SP-510, it prompts you to:](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-26.png)
![- 27 - 1.Create your own personal pass code. Make sure that you pick a number that is easy to remember. 2.Record your name announcement. 3.Create the greeting callers hear when they reach your voicemail. 4.Choose whether of not to activate One-Touch Message Access. If you select One-Touch Message Access, you do not have to enter your pass code to access voicemail messages. Note: One-Touch Message Access is available when you call from your Sprint PCS SP-510 in your sprint PCS Home Service Area. New Massage Alerts When you receive new voicemail, page/text or Browser messages, your phone rings briefly, the LED flashes red and the icon is displayed. If it is a voicemail message, the following options are displayed. To select an option, highlight it and press [SEND]. SEND – clears the message. (You can also press [CLR].)Call – Dials your voicemail box. If it is a page/test message, the following options are displayed. To select an option, highlight it and press [SEND]. Read – Displays the message. Exit – Returns to the Main Menu. (You can also press [CLR].) Retrieving Page/Text Messages To retrieve page/text messages: 1. From the Main Menu, highlight Messages and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-27.png)
![- 28 - 2. Highlight Page/Text and press [OK]. ☞Tip! You can also access page/text messages from the Main Menu by pressing the Mouse Key left 3. Highlight the message you want to display and press [OK]. Press the Mouse Key down to display additional text. ☞Tip! You can view the next or previous message by pressing the Mouse Key left (previous) or right (next) 4. Press [OK] to display message options. To select an option, highlight it and press [OK]. Page Message options: Call – Dials the phone number of the sender (if applicable). Alternate #s – Displays the Phone Book entry (if the sender’s phone number is in your Phone Book and the entry has alternate phone numbers). To dial an alternate number, highlight the phone number and press and hold [OK]. Save Phone # - Saves the phone number in your Phone Book (if applicable). Prepend – Prepends the phone number (if applicable). (See “Prepend Dialing” on page 36.) Erase Message – Deletes the message. Read – Displays the message again. Exit – Returns to the Main Menu. Text Message options: Call – Dials the phone number of the sender (if applicable). Alternate #s – Displays the Phone Book entry (if the sender’s phone number is in your Phone Book and the entry has alternate phone numbers). To dial an alternate number, highlight the phone number and press and hold [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-28.png)
![- 29 - Save Phone # - Saves the sender’s phone number in your Phone Book (if applicable). Extract #s – Extracts phone numbers (if there are numbers contained in the text message).(See the following chapter.) Prepend – Prepends the phone number (if applicable). (See “Prepend Dialing” on page 36.) Erase Message – Deletes the message. Read – Displays the message again. Exit – Returns to the Main Menu. Extracting Phone Numbers From Text Messages To extract a phone number from a text message: 1. While displaying a text message, press [OK] to view the Text Message options. 2. Highlight Extract #s and press [OK]. All the phone numbers contained in the message are displayed. Note: If there are no phone numbers to extract from the message, the option does not display. 3.Highlight the number you want to call or save and press. 4.Highlight Call, Next (to display the following number), Save Phone # or Prepend and press [OK]. Erasing All Page/Text Messages 1. From the Main Menu, highlight Messages and press [OK]. 2. Highlight Erase Page/Text and press [OK]. 3. Highlight Yes and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-29.png)
![- 30 - Sending a Page or Text Message to Your Phone Callers have the option to send a page message when they reach your voicemail box. A page/text message can also be sent to your phone via e-mail. Your address is Yourphonenumber@messaging.sprintpcs.com. Page/Text Message Storage Your VX3300 can store up to 50 page/text messages. When the message memory is 90% full, a warning message prompts you to erase messages to obtain more memory space. Caller ID Caller ID displays the phone number of the person calling you (if the number is available). When you receive a call from a phone number stored in your Phone Book, the entry’s name is also displayed. If you call someone from your Sprint PCS SP-510 who has Caller ID, your phone number is displayed on their phone. To block your phone number for a particular outgoing call, press [ * ] [ 6 ] [ 7 ] before dialing the phone number. Call Waiting If you receive an incoming call while you are on another call, you hear a beep and the person’s Caller ID information is displayed. To answer the call, highlight Flash and press [OK]. To toggle between the two callers, highlight Flash again and press [OK]. If you do not want to be interrupted during a call, you can temporarily disable Call Waiting by pressing [ * ] [ 7 ] [ 0 ] before dialing the phone number. When the call is finished, Call Waiting automatically reactivates. To permanently disable Call Waiting for all calls, contact Sprint PCS Customer Care. Three-Way Calling Three-Way Calling lets you talk to two people at the same time.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-30.png)
![- 31 - To conference in a third caller when you are on a call: 1.Highlight Dial 3-Way Call and press [OK]. 2.Enter the phone number, highlight 3-Way Call and press [OK]. 3.When the call is answered, highlight Flash and press [OK] to begin your Three-Way Call. Note: You can also initiate a Three-Way Call during a Call by dialing a phone number from your Phone Book, Call Logs or Page/Text messages. Dialing Sprint PCS Customer Care A Sprint PCS Customer Advocate is available to assist you 24 hours a day by dialing [ * ] [ 2 ] [OK] (in Southern California dial [ * ] [ 6 ] [ 1 ] [ 1 ] [OK] ) from your Sprint PCS SP-510. An Advocate can help you with questions regarding your phone, billing, Sprint PCS Services and air time usage. You can also reach Sprint PCS Customer Care By dialing 1-888-211-4PCS (4727) (To dial Sprint PCS Services from your Phone Book, see “Dialing Sprint PCS Services” on page 44.) Dialing Sprint PCS Directory Assistance To obtain residential, business and government listings; to get help completing local – or long – distance calls; or to obtain movie listings, hotel, shopping and local event information, contact Sprint PCS Directory Assistance by dialing [ 4 ] [ 1 ] [ 1 ] [OK]. Sprint PCS will connect your call at no additional charge. (To dial Sprint PCS Services from your Phone Book, see “Dialing Sprint PCs Serviced” on page 44.) Dialing Sprint PCS Operator Services For assistance with placing collect calls or using a calling card, dial [ 0 ] and press [OK]. Roadside Assistance Contact Sprint PCS Customer Care for information on the Roadside Assistance program.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-31.png)
![- 32 - Making Emergency Calls You can place calls to 911, Customer Care ( [ * ] [ 2 ] [OK] or [ * ] [ 6 ] [ 1 ] [ 1 ] [OK] in Southern California) or the Special Numbers even when your phone is locked. To call 911, dial [ 9 ] [ 1 ] [ 1 ] and press [OK]. To dial a Special Number, dial the phone number and press [OK]. (See “Using Special Numbers” on page 70.) Roaming on to Other Service Providers Roaming occurs when you are in an area serviced by another authorized service provider. When this situation occurs, the icon and Digital Roam of Analog Roam are displayed. If there is no service available, the iconisdisplayed.Getting the Most From Your Phone Main Menu The Main Menu is displayed when your phone is in a Sprint PCS or authorized PCS CDMA or analog cellular provider’s service area (or below the In Call Options when you are on a call). To return to the Main Menu from another menu, press and hold [CLR]. Main Menu Options Call Logs Scheduler Security Messages MiniBrowser Setup Phone Book Sounds Calculator Roaming Display Games KeyGuard To select a Main Menu option, highlight it and press [OK]. For a complete description of each menu, see the appropriate chapter. Call Logs (Call History- not functioning) Your Sprint PCS SP-510 stores your last ten incoming, ten outgoing and ten missed calls in the Call Logs menu. Viewing Call Logs](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-32.png)
![- 33 - To view the last ten incoming, ten outgoing or ten missed calls. 1.From the Main Menu, highlight Call Logs and press [OK]. 2.Highlight either Outgoing Log, Incoming Log or Missed Log and press [OK]. Note: When you receive a call from or dial a phone number in the Missed Log, the entry is removed from the Missed Log. A new entry will be stored in either the Outgoing or Incoming Log. The Outgoing and Incoming Logs also remove duplicate entries. 3.To view a Call Log entry, highlight the entry and press [OK]. The phone number, Phone Book entry name (if the number is in your Phone Book) and following menu options are displayed. To select an option, highlight it and press [OK]. Call – Dials the phone number. Alternate #s – If the phone number is in your Phone Book and the entry has alternate numbers, they are displayed. To dial an alternate number, highlight it and press and hold [OK]. Save Phone # - If the phone number is not in your Phone Book, an entry is created. Time/Date – Displays the time, date and duration of the call. Prepend –Prepends the phone number. (See “Prepend Dialing” on the following page. Erase – Deletes the Call Log entry. Next – Displays the next Call log entry. Previous – Displays the previous Call log entry.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-33.png)
![- 34 - ☞Tip! You can also view the next or previous entry by pressing the Mouse Key left (previous ) or right(next). Dialing Phone Numbers From the Call Log. 1. From the Main Menu, highlight Call Long and press [OK]. 2. Highlight Outgoing Log, Incoming Log or Missed Log and press [OK]. 3. Highlight the phone number you want to call and press and hold [OK]. Note: You cannot dial phone numbers identified as No ID, Restricted, Data or Fax calls. Saving Phone Numbers From the Call Log. 1. From the Main Menu, highlight Call Longs and press [OK]. 2. Highlight Outgoing Log, Incoming Log or Missed Log and calls. 3. Highlight the phone number you want to save and press [OK]. Note: You cannot save phone numbers identified as No ID or Restricted Call. 4. Highlight Save Phone # and press [OK]. 5. Select a label by highlighting Home, Work, Mobile, Pager, Fax, Data or No Label and pressing [OK]. Note: Phone numbers labeled Fax or Data can only be dialed through a personal computer. 6. Enter a name or highlight Save w/o Name and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-34.png)
![- 35 - 7. Press [OK] to save the entry in the next available memory location. (You can also enter an entry number or highlight an empty location and press [OK].) Prepend Dialing You can add an area code, pauses or additional number before a phone number by using the Prepend option. To prepend digits to a phone number: 1.Select a phone number from the Call Logs, Phone Book of page/text message. 2.Highlight Prepend and press [OK]. 3.Enter the numbers you want dialed before the phone number. To select an option, highlight it and press [OK]. Call – Dials the current phone number. Save Phone # - Creates a Phone Book entry using the current number. Hard Pauses – Inserts a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 15.) Exit – Returns to the previous screen. Erasing Multiple Call Logs To erase multiple Call Logs: 1.From the Main Menu, highlight Call Logs and press [OK]. 2.Highlight Erase Logs and press [OK]. 3.Highlight Outgoing Log, Incoming Log, Missed Log or All Logs and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-35.png)
![- 36 - 4.Highlight Yes and press [OK]. Viewing and Resetting Air Time Air Time displays MiniBrowser access and Sprint PCS, PCS CDMA and analog cellular air time (rounded to the nearest minute), as well as the number of calls made to or from your phone. To view Air Time: 1.Highlight Call Logs and press [OK]. 2.Highlight Air Time and press [OK]. To reset the Air Time, highlight Reset and press [OK]. Note: Air Time is not intended for billing purposes. Messages ======page 38 그림==== Voicemail For information on voicemail messages, see “Accessing Sprint PCS Voicemail” on page 24. Page/Text Messages For information on page/text messages, see “Retrieving Page/Text Messages” . Clearing the Message Icon Your phone may temporarily continue to display the icon after you have checked your new voicemail messages.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-36.png)
![- 37 - To clear the icon from the display screen: 1. From the Main Menu, highlight Messages and press [OK]. 2. Highlight Voicemail and press [OK]. 3. Highlight Clear Count and press [OK] 4. Highlight Yes and press [OK]. Browser Messages To access Browser messages from the Messages menu: 1. From the Main Menu, highlight Messages and press [OK]. 2. Highlight Browser Msgs and press [OK]. Erasing Page/Text Messages To erase all page/text messages: 1. From the Main Menu, highlight Messages and press [OK]. 2. Highlight Erase Page/Text and press [OK] 3. Highlight yes and press [OK]. Phone Book Your Sprint PCS SP-510 can store 99 personal entries. Each Phone Book entry can store up to nine phone numbers, so you can save a person’s home and work number in the same location in the same location. The Phone Book can store a total of 300 numbers. Phone Book Menu](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-37.png)
![- 38 - ===== page 40 그림추가========== Finding a Name 1. From the Main Menu, highlight Phone Book and press [OK]. 2. Highlight Find Name and press [OK]. Phone Book entries are listed in alphabetical order. ☞Tip! You can also access the Rind Name feature by pressing the Mouse Key right in the Main Menu. 4.Scroll through the Phone Book with the Mouse Key (up/down) or enter letters to narrow the search. The Phone Book displays all entries containing the letters you enter. 5.To display an entry, highlight it and press [OK]. To speed dial the entry, press and hold [OK]. To deal alternate numbers, press the Mouse Key left or right and press and hold [OK]. (See “Phone Book Entry Options” on page 42.) Finding an Entry Number 1.From the Main Menu, highlight Phone Book and press [OK]. 2.Highlight Find Entry and press [OK]. Phone Book entries are listed in numerical order. 3.Scroll through the Phone Book with the Mouse Key (up/down) or enter the two-digit entry number to find the entry. 4.To display an entry, highlight it and press [OK]. To speed dial the entry, press and hold [OK]. To dial alternate numbers, press the Mouse Key left or right and press and hold [OK]. (See “Phone Book Entry Options” on page 42.) Phone Book Entry Options To Display a Phone Book entry, see “Finding a Name” or “Finding an Entry” on the previous pages. To select an option, highlight it and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-38.png)
![- 39 - Call – Dials the entry’s speed-dialing number. Roam Confirm – Reminds you that you are making a call on an analog network. (See “Disabling Roam confirm” on page 76.) Roam Call – Dials the phone number using the current PCS CDMA or analog cellular network. Alternate Numbers – Press and hold [OK] to dial an alternate phone number (if the entry has more than one phone number). Call Alarm – Creates a Call Alarm. (See “Adding Call Alarms From the Phone Book” on page 45.) Add Phone # - Adds a phone number to the entry. (See “Adding Phone Numbers to a Phone Book Entry” on page 46.) Set ID Ringer – Assigns a Ring Type to the entry. (See “Selecting an ID Ringer” on page 46.) Prepend – Inserts numbers or pauses before the phone number. (See “Prepend Dialing” on page 36.) Edit – Edits the entry. (See “Editing a Phone Book Entry” on page 47.) Erase Number – To delete the selected phone number, press [OK] again. Erase Entry – To delete the entry, press [OK] again. Next – Displays the next Phone Book entry. Previous – Displays the previous Phone Book entry. ☞Tip! You can also view the next or previous entry by pressing the Mouse Key left (previous) or right (next). Adding a New Entry To add a new entry:](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-39.png)
![- 40 - 1.From the Main Menu, highlight Phone Book and press [OK]. ☞Tip! You can also add an entry from the Main Menu by entering a phone number, highlighting Save and pressing [OK]. 2.Highlight Add New Entry and press [OK]. 3.Enter a name for the entry or highlight Save w/o Name and press [OK]. (See “Entering Characters Using the Keypad” on page 6.) 4.Enter the phone number and press [OK]. ☞Tip! If you save phone numbers with their area codes, you can still dial them from your Phone Book when you travel outside your Sprint PCS Home Service Area. 5.Select a label by highlighting Home, Work, Mobile, Pager, Fax, Data or No Label and pressing [OK]. Note: Phone numbers labeled Fax of Data can only be dialed through a personal computer. 6.Press [OK] to save the entry in the next available memory location. (You can also enter an entry number or highlight an empty location and press [OK].) My Sprint PCS Phone Number To display your phone number: 1.From the Main Menu, highlight Phone Book and press [OK]. 2.Highlight My Phone # and press [OK]. Dialing Sprint PCS Services You must be in Digital Mode to access Sprint PCS Services. To dial Sprint PCS Services: 1.From the Main Menu, highlight Phone Book and press [OK]. 2.Highlight Services and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-40.png)
![- 41 - Highlight Call and press [OK]. For information on Sprint PCS Services, see pages 30-31. Adding Call Alarms From the Phone Book Schedule a Call Alarm to remind you to remind you to make an important call. To add a Call Alarm from the Phone Book: 1.Display a Phone Book entry. 2.Highlight Call Alarm and press [OK]. 3.Enter the time and date using your keypad. (Fields must be two digits, for example “05:07a 01/01/99.”) To toggle between AM and PM, highlight AM/PM and press [OK]. 4.To schedule the Call Alarm, highlight Done and press [OK]. To repeat the alarm, highlight Set Repeating and press [OK]. Set Repeating – To repeat the Call Alarm, highlight Daily, Weekly, Monthly or Yearly and press [OK]. ☞Tip! You can also add a Call Alarm from the Scheduler menu. (See “Adding Call Alarms From the Scheduler” on page 53.) Call Alarm Notification If your phone is powered on when a Call Alarm is scheduled, the phone displays the Phone Book entry name or phone number, the time and date of the alarm and the following menu options. To select an option, highlight it and press [OK]. OK – Displays the Call or Roam Call option. To dial the number, press [OK] again. To dial an alternate phone number, highlight the number and press and hold [OK]. Snooze – Repeats the alarm in ten minutes.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-41.png)
![- 42 - Erase – Deletes the alarm. Edit Time/Date – Lets you reschedule the time, date and frequency of the alarm. Exit – Returns to the Main Menu (or press [CLR]) If your phone is powered off when a Call Alarm is scheduled, the alarm is displayed the next time your phone powers on. Adding Phone Numbers to a Phone Book Entry To add a phone number to a Phone Book Entry 1. Display a Phone Book entry. 2. Highlight Add Phone # and press [OK]. 3. Enter the phone number and press [OK]. 4. Select a label by highlighting Home, Work, Mobile, pager, Fax, Data or No Label and pressing ok. Note: Phone numbers labeled Fax or Data can only be dialed through a personal computer. ☞Tip! You can also add a phone number by entering the number and selecting Save.(See “Saving a Phone Number”Selecting an ID Ringer You can assign twenty-five ringer tones(plus a vibrating ringer)to a Phone Book entry so you can identify the caller by the sound of the ringer. To select an ID Ringer: 1. Display a Phone Book entry. 2. Highlight Set ID Ringer and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-42.png)
![- 43 - 3. Highlight a Ring Type and press [OK] You will hear a preview of the Ring Type when you highlight it. Prepending a Phone Book Entry For information on prepending phone numbers, see “Prepend Dialing” on page 36. Editing a Phone Book Entry To edit a Phone Book entry’s phone number, name or entry number: 1. Display a Phone Book entry. 2. Highlight Edit and press [OK]. To select an option, highlight it and press [OK]. Phone # - Highlight the phone number you want to edit and press [OK]. Press the Mouse Key left or [CLR] to delete digits. Use the keypad to enter new digits. Name – Press the Mouse Key left to move the cursor, or press CLR to delete characters. Use the keypad to enter new characters. Press ok to save the change. Entry # - To change the entry number, highlight an empty location and press OK. To make a Phone Book entry secret or change the speed-dialing number, see the following chapters. Secret Phone Book Entries You can hide an entry’s phone number by making it secret . The entry name is still displayed, but the number is replaced by (secret) To make a Phone Book entry secret : 1. Display a Phone Book entry.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-43.png)
![- 44 - 2. Highlight Edit and press [OK]. 3. Highlight Make Secret and press [OK]. 4. Highlight Yes and press [OK]. To make a secret Phone Book entry not secret: 1. Display a Phone Book entry. 2. Highlight Edit and press [OK]. 3. Enter your lock code. 4. Highlight Make Secret and press OK. 5.Highlight No and press OK. Changing Speed-Dialing Numbers The first phone number you enter when creating a Phone Book entry is used as the default speed-dialing number. To change the default speed-dialing number for a Phone Book entry: 1. Display a Phone Book entry. 2. Highlight Edit and press [OK]. 3. Highlight Set Speed Dial and press [OK]. 4. Highlight the number you want to make the speed-dialing number and press [OK]. Roaming =====page49 그림추가=======](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-44.png)
![- 45 - To operate your phone on either the Sprint PCS Nationwide Network, authorized PCS CDMA or analog cellular network(the phone will search for the Sprint PCS network first): 1. From the Main Menu, highlight Roaming and press [OK]. 2. Highlight Set Mode and press [OK]. To operate your phone on the Sprint PCS Nationwide Network or PCS CDMA network only, or an authorized analog cellular network only(the phone will not use the alternate available network even if your phone is in that network’s coverage area): 1.From the Main Menu, highlight Roaming and press [OK]. 2.Highlight Set Mode and press [OK]. 3.Highlight Sprint PCS or Analog Only and press [OK]. When switching between Sprint PCS and Analog Only, the Battery Charge Status icon may vary due to different transmission power requirements. Note: The Analog Only setting is not saved the next time the phone powers up. To disable the extra step required to make or answer a roaming call: 1.From the Main Menu, highlight Roaming and press [OK]. 2.Highlight Call Guard and press [OK]. 3.Highlight No and press [OK]. Scheduler Use the Scheduler to remind you of events or important calls you need to make. You can schedule up to 100 events, 15 Call Alarms and 20 To Do Items. Scheduler Menu](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-45.png)
![- 46 - Adding Meetings, Special Occasions, General Events and Dining Appointments 1.From the Main Menu, highlight Scheduler and press [OK]. 2.Highlight the day you want to add an event to by pressing the Mouse Key left (previous day) or right (next day) and press [OK]. ☞Tip! Press the Mouse Key up or down to scroll through the previous (up) or next (down) week’s events. Press the up or down Volume Control keys to scroll through the week’s events for the previous (up) or next (down) month. 3.Highlight Add Event and press [OK]. 4.Highlight Meeting, Spcl Occasion , Event or Dining Appt. and press [OK]. 5.Enter a description and press [OK]. 6.Enter the time, date and duration using your keypad. (Fides must be two digits, for example “05:07a 01/01/ 99.”) To toggle between AM and PM, highlight AM/PM and press [OK]. 7.To schedule the event, highlight Done and press [OK]. To further edit the event, highlight Edit Alarm, Edit Repeat of Set End Time and press [OK]. Edit Alarm – Enter the number of hours or minutes before the event you want the alarm to sound and press [OK]. If you do not want to be reminded, highlight No Alarm and press [OK]. The icon is displayed next to your event if an alarm is scheduled with the event. Note: Default alarm times are 10 minutes for Meetings, Events and Dining Appointments, 24 hours for Special Occasion and 0 minutes for Call Alarms. Edit Repeat – To repeat the event, highlight Daily, Weekly, Monthly or Yearly and press [OK]. The icon is displayed next to your event if the event if scheduled to repeat. Note : Default alarm times are 10 minutes for Meetings, Events and Dining Appointments, 24 hours for Special Occasions and 0 minutes for Call Alarms. Edit Repeat – To repeat the event, highlight Daily, Weekly, Monthly or Yearly and press icon is](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-46.png)
![- 47 - displayed next to your event if event is scheduled to repeat. Set End Time – If the duration is longer than 99 hours 99 minutes, you can schedule an end time by entering the time and date and pressing [OK]. Event Notification When an event alarm is scheduled, the event description, time and date and following menu options are displayed. To select an option, highlight it and press [OK]. View Details – Displays the event time, date, duration and description. Snooze – Repeats the alarm in ten minutes. Erase – Deletes the event, even if it is a repeating event. Edit – Lets you edit the time and date of the event. Exit – Returns to the Main Menu (or press and hold [CLR]). If your phone is powered off when an event alarm is scheduled, the same menu options are displayed the next time your phone powers on. Adding Call Alarms From the Scheduler Schedule a Call Alarm to remind you to make an important call. To add a Call Alarm from the Scheduler. 1.From the Main Menu, highlight Scheduler and press [OK]. 2.Highlight the day you want to schedule a Call Alarm for by pressing the Mouse Key left (previous day) or right (next day) and press [OK]. ☞Tip! Press the Mouse Key up or down to scroll through the previous (up) or next (down) week’s events. Press the up or down Volume Control keys to scroll through the week’s events for the](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-47.png)
![- 48 - previous (up) or next (down) month. 3.Highlight Add Event and press [OK]. 4.Highlight Call Alarm and press [OK]. 5.Highlight the Phone Book entry you want to be reminded to call, or highlight Number Only and press [OK]. If you select Number Only, enter the phone number and press [OK]. 6.Enter the time and date using your keypad. (Fields must be two digits, for example “05:07a 01/01/99.”) To toggle between AM and PM, highlight AM/PM and press [OK]. To repeat the alarm, highlight Set Repeating and press [OK]. Set Repeating – To repeat the event, highlight Daily, Weekly, Monthly or Yearly and press [OK]. 7.Highlight Done and press [OK]. ☞Tip! You can also add a Call Alarm from the Phone Book menu. (See “Adding Call Alarms From the Phone Book” on page 45.) Call Alarm Notification See “ Call Alarm Notification” on page 45. Viewing Events and Call Alarms 1.From the Main Menu, highlight Scheduler and press [OK]. 2.A “*” is displayed next to days with events or Call Alarms scheduled. When you highlight a day with an “*”, Event Type icons are displayed at the bottom of the screen. Icons are not displayed in chronological order and only one icon appears per event type. (See “Event Type Icons” on the following page.) ☞Tip! Press the Mouse Key up or down to scroll through the previous (up) or next (down) week’s events. Press the up of down Volume Control keys to scroll through the week’s events for the previous (up ) or next (down) month.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-48.png)
![- 49 - 3.To View an individual day, highlight the day by pressing the Mouse Key left (previous day) or right (next day) and press [OK]. Events are displayed in chronological order. 4.To display an event, highlight it and press [OK]. ☞Tip! To view the day’s next or previous event or Call Alarm, press the Mouse Key left (previous) or right (next). 5.To display event options, press [OK]. (See “Event Options” on page 56) To view a future or past day’s scheduled events: 1. From the Main Menu, highlight Scheduler and press [OK]. 2. Press [OK] to display the Scheduler menu. 3. Highlight Go To Date and press [OK]. 4. Enter the date using your keypad. (Fields must be two digits, for example “01/01/99.”) 5. Highlight Go and press [OK]. Press [OK] again to view the day’s events. Event Type Icons When you create events, icons are displayed that indicate that event type. ICON DESCRIPTION Meeting Dining Event Call Alarm Special Occasion Generic Event](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-49.png)
![- 50 - Repeation Event Alarm Event Options To edit an event, display an event and press [OK]. To select an option, highlight it and press [OK] Erase – Deletes the event. Edit Descript – Edits the event description. Edit Time/Date – Edits the time, date and duration of the event. Next – Displays the next scheduled event for the selected day. Previous – Displays the previous scheduled event for the selected day: ☞Tip! You can also view the next or previous event by pressing the Mouse Key left (previous) or right (next). Exit – Returns to the Scheduler menu. Editing Call Alarms To edit a Call Alarm, highlight the alarm and press [OK]. The time, date and phone number (or Phone Book entry) are displayed with the following options. To select an option, highlight it and press [OK]. Erase – Deletes the Call Alarm. Edit Time/Date – Edits the time and date of the Call Alarm.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-50.png)
![- 51 - Next – Displays the next scheduled event or Call Alarm for the selected day. Previous – Displays the previous scheduled event or Call Alarm for the selected day. ☞Tip! You can also view the next or previous event or Call Alarm by pressing the Mouse Key left (previous) or right (next). Exit – Returns to the Scheduler menu. Adding To-Do’s To add an entry to your To-Do List: 1.From the Main Menu, highlight Scheduler and press [OK]. 2.Press [OK] again to display the Scheduler menu. 3.Highlight To Do List and press [OK]. 4.Highlight Add I tem and press [OK]. 5.Enter a description and press [OK]. 6.Highlight Low or High and press [OK]. Low priority To-Do’s are indicated by a “*” , high priority To-Do’s by a “!” . When you complete a To-Do, you can identify it as Done. (See “Editing To-Do’s” on page 59). Viewing To-Do’s To view your To-Do List: 1.From the Main Menu, highlight Scheduler and press [OK]. 2.Press [OK] to display the Scheduler menu. 3.Highlight To Do List and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-51.png)
![- 52 - Editing To-Do’s To edit a To-Do, Highlight the To-Do and press [OK]. To select an option, highlight it and press [OK]. Erase Item – Deletes the To-Do. Edit Priority – Edits the To-Do’s priority or identifies it as Done. A check mark identifies To-Do’s as Done. Edit Descript – Edits the To-Do’s description. Add to Schedule – Removes the To-Do from the To-Do List and makes it a scheduled event. To schedule the To-Do to as an event, enter a time and date with your keypad. To select an option, highlight it and press [OK]. Done – Schedules the To-Do as an event. AM/PM – Toggles the event time between AM and PM. Edit Alarm – Edits the number of hours or minutes an alarm sounds before the event. Edit Repeat – Lets you schedule the event to repeat. Set End Time – Edits the event’s end time. Exit – Returns to the Scheduler menu. Next – Displays the next scheduled To-Do. Previous – Displays the previous scheduled To-Do. ☞Tip! You can also view the next or previous To-Do by pressing the Mouse Key](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-52.png)
![- 53 - left (previous) or right (next) Exit – Returns to the scheduler menu. Erasing Multiple Events, Call Alarms of To-Do’s To erase old events, Call Alarms and To-Do’s: 1.From the Main Menu, highlight Scheduler and press [OK]. 2.Press [OK] to display the Scheduler menu. 3.Highlight Memory and press [OK]. 4.Highlight Erase Old and press [OK]. ☞Tip! To erase all events, Call Alarms and To-Do’s, highlight Erase All and press [OK] 5.Highlight Yes and press [OK]. Viewing Scheduler, Call Alarm and To-Do Memory To view memory space: 1. From the Main Menu, highlight Scheduler and press [OK]. 2. Press [OK] to display the Scheduler menu. 3. Highlight Memory and press [OK]. 4. Highlight View Details and press [OK]. 5. Highlight Schedule, Call Alarm or To-Do List and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-53.png)
![- 54 - MiniBrowser MiniBrowser Menu ===page 61 그림추가==== Using the MiniBrowser The phone must be on a Sprint PCS or digital network to use the MiniBrowser, but you can view saved (cached) pages in Analog Mode. When you are viewing cached pages, there is no network activity and you are not billed for air time. Wen you access the Internet and view new Web sites, a data call is initiated. If there is no network activity within a specific time, the data call is automatically dropped. Note: Signal strength affects your phone’s ability to access the Internet. To activate the MiniBrowser: 1.From the Main Menu, highlight MiniBrowser and press [OK]. Note: The first time you log on the MiniBrowser, you may be prompted to enable security encryption by pressing [OK]. 2.What appears on the display when accessing the MiniBrowser is dependent on the service provider content. To view additional text, press the Mouse Key up or down to scroll by line, or press the up or down Volume Control keys to scroll by page 3.To select a menu option at the bottom of the screen, highlight the option by pressing the Mouse Key left or right and press [OK]. Depending on the site you are viewing, the following options may be displayed. Home –Displays the Home page. Exit – Returns to the Main Menu. (You can also press and hold [CLR]) Help – Displays the Help menu.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-54.png)
![- 55 - Link – Accesses a linked Web page. Links are identified by brackets “ [Web link].” Back – Backs up to the previously viewed page. (You can also press [CLR]) Sounds Adjusting the Volume 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Volume and press [OK]. 3. Highlight Ringer or Key Beep and press [OK]. ☞Tip! You can use the Volume Control keys to adjust the Ring Volume in the Main Menu or the Voice Volume during a call. 4. Highlight High, Medium, Low, Off or Vibrate (for Ringer only) and press [OK]. Note: When the phone is in Vibrate Mode and attached to and accessory (Desktop Charger, Hands-Free Car Kit, etc.), it uses the Standard Ring Type to alert you of incoming calls, alarms or messages. Selecting Ring Types for Voice Calls To Select a Ring Type for Voice Calls: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Ring Type and press [OK]. 3. Highlight Voice Calls and press [OK]. 4. Highlight With Caller ID, No Caller ID or Roaming and press [OK]. Note: If you select Roaming, the Ring Type is used for all incoming roaming calls.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-55.png)
![- 56 - 5. Highlight a Ring Type and press [OK]. You will hear a preview of the Ring Type when you highlight it. ☞Tip! You can also assign different Ring Types to individual Phone Book entries. (See “Selecting an ID Finger” on page 46.) Selecting Ring Types for Messages To select a Ring Type for Messages: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Ring Type and press [OK]. 3. Highlight Messages and press [OK]. 4. Highlight Voicemail, Page/Text of MiniBrowser and press [OK]. 5. Highlight a Ring Type and press [OK]. You will hear a preview of the Ring Type when you highlight it. Tone LengthSelecting Ring Types for Alarms, Data Calls and Fax calls To select a Ring Type for Alarms, Data Calls or Fax Calls: 1.From the Main Menu, highlight Sounds and press [OK]. 2.Highlight Ring Type and press [OK]. 3.Highlight Alarms, Data Calls or Fax Calls and press [OK]. 4.Highlight a Ring Type and press [OK]. You will hear a preview of the Ring Type when you highlight it.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-56.png)
![- 57 - Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems. To select a tone length: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Key Tone and press [OK]. 3. Highlight Short of Long and press [OK]. Alert Notification To enable of disable alert sounds: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Alerts and press [OK]. 3. Select an alert by highlighting it and pressing [OK]. Services – An alert sounds when you exit or enter PCS CDMA or cellular coverage. Messages – An alert sounds when you receive a voicemail or page/text message. Minute Minder – Your phone beeps once a minute when you are on a call. (The beep is not audible to the other party.) Flip – An alert sounds when you open or close the Flip (in Active Flip Mode). 4. Highlight ON or Off and press [OK]. Display Menu For information on changing Backlight, Greeting or Contrast settings, see Handy Tips. Security](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-57.png)
![- 58 - Accessing the Security Menu You must enter your lock code to view the Security menu. If you forget your lock code, try using the last four digits of your Social Security number, the last four digits of your Phone Number or 0000. To access the Security menu: 1. From the Min Menu, highlight Security and press [OK]. 2. Enter your lock code. Locking Your Phone When your phone is locked, you can only make calls to 911, Customer Care and Special Numbers or receive incoming calls. To lock your phone: 1. From the Security menu, highlight Lock Phone and press [OK]. 2. Highlight Lock Now or On Power up and press [OK]. If you select On Power Up, the phone will be locked each time it power up. Unlocking Your Phone 1. Highlight Unlock and press [OK]. 2. Enter your lock code. Changing the Lock Code To change your lock code: 1. From the Security menu, highlight Change Lock and press [OK]. 2. Enter your new lock code.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-58.png)
![- 59 - 3. Reenter your new lock code. Restricting Calls You can restrict which phone numbers you can receive calls from or dial. 1.From the Security menu, highlight Restrict Calls and press [OK]. 2.Highlight Outgoing or Incoming and press [OK]. To select an option, highlight it and press [OK] Phone Book Only – You Unrestricting Calls : 1.From the Security menu, highlight Restrict Calls and press [OK]. 2.Highlight Off and press [OK]. To unrestrict incoming or outgoing calls: 1. From the Security menu, highlight Restrict Calls and press [OK]. 2. Highlight Outgoing or Incoming and press [OK]. 3. Highlight Allow All and press [OK]. Using Special Numbers You can save three Special Numbers that can be dialed even when the phone is locked. You can also restrict your phone to dial or receive calls from Special Numbers only. (See “Restricting Calls” on the previous page.) To add or replace a Special Number. 1. From the Security menu, highlight Special #s and press [OK].](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-59.png)
![- 60 - 2. Highlight and entry location and press [OK]. 3. Enter or replace the phone number. 4. Highlight OK and press [OK]. Note: There are no speed dialing options associated with Special Numbers. Erasing the Phone Book To erase all the names and phone numbers in your Phone Book: 1. From the Security menu, highlight Erase PhoneBook and press [OK]. 2. If you are certain you want to erase the entire contents of the Phone Book, highlight Yes and press [OK]. Resetting Your Phone Resetting the phone restores all the factory defaults, including the Ringer Types and Display settings. The Phone Book, Call Logs, Scheduler, Messages and Call Alarms are not affected. To reset your phone: 1. From the Security menu, highlight Reset Phone and press [OK]. 2. If you are certain you want to reset your phone, highlight Yes and press [OK]. Setup Setup Menu =====page 72 그림추가====== Data/Fax Mode The Sprint PCS SP-510 can send and receive data or fax transmissions through a](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-60.png)
![- 61 - personal computer using the optional Data Connectivity Kit. Visit a Sprint PCS Center or dial [ # ] [ A ] [ C ] [ C ] or 1-800-974-2221 to obtain optional accessories. Note: The phone must be on a digital network to send or receive data and faxes. Receiving a Fax To receive a fax with your phone: 1.From the Main Menu, highlight Setup and press [OK]. Note: The Data Cable must be connected to your phone to view Data/Fax menu options. 2. Highlight Data/Fax (In) and press [OK]. 3. Highlight Incoming Fax and press [OK]. Note: When the phone is in Data/Fax (In) Mode, you cannot make or receive voice calls. Receiving Data To receive data with your phone: 1.From the Main Menu, highlight Setup and press [OK]. Note: The Data Cable must be connected to your phone to view Data/Fax menu options 2.Highlight Data/Fax (In) and press (OK). 3.Highlight Incoming Data and press (OK). Note: When the phone is in Data/Fax (In) Mode, you cannot make or receive voice calls.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-61.png)
![- 62 - Returning to Voice Mode To return to Voice Mode at the end of a data or fax transmission, highlight Exit Data Mode or Exit Fax Mode and press [OK]. To return to Voice Mode from Data/Fax Mode: 1.From the Main Menu, highlight Setup and press [OK]. 2.Highlight Data/Fax (In) and press [OK]. 3. Highlight Disable and press [OK]. Note: The phone powers up in Voice Mode, even if it was in Data/Fax Mode when it was powered down. The phone also returns to Voice Mode if the Data Cable is disconnected. Answering Your Phone with the Hands-Free Car Kit You can select different answering options when your phone is connected to the Hands-Free Car Kit. To answer calls automatically or by pressing any key: 1. From the Main Menu, highlight Setup and press [OK]. 2. Highlight Car Use and press [OK]. To select and option, highlight it and press [OK]. Any Key Answer - You can answer calls by pressing any key (not including the [CLR] key, Mouse Key or Volume Control keys). Auto Answer - Your phone answers incoming calls automatically after five seconds. 3. Highlight On and press [OK]. To disable an option, follow steps 1 and 2 and select Off.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-62.png)
![- 65 - • If you have any reason to suspect that interference is taking place, turn your phone OFF immediately Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider [or call the customer service line to discuss alternatives.] Optional for each phone manufacturer. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Turn your phone OFF in any facility where posted notices so require. AIRCRAFT FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. BLASTING AREAS To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and instructions. POTENTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-65.png)
![- 75 - Consumer Information on SAR (Specific Absorption Rate) THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications ‘Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that ist does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body)as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.140 W/kg and when worn on the body, as described in this user guide, is 1.040 W/kg, (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). [Labeling Committee note : if applicable, if body-worn SARs are required]. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Gant section of http://www.fcc.gov/oet/fccid after searching on FCC ID BEJVX3300.](https://usermanual.wiki/LG-Electronics-USA/VX3300.Users-Manual/User-Guide-470966-Page-75.png)
