LG Electronics USA VX7100 Cellular/PCS CDMA Phone with Bluetooth User Manual Layout 1
LG Electronics USA Cellular/PCS CDMA Phone with Bluetooth Layout 1
Users Manual
Read these simple guidelines. Breaking the rules may be dangerous
or illegal. Further detailed information is given in this user guide.
Violation of the instructions may cause serious injury or death.
●Never use an unapproved battery since this could
damage the phone and/or battery and could cause
the battery to explode.
●Never place your phone in a microwave oven as it will
cause the battery to explode.
●Never store your phone in temperatu res less than
-4°F or greater than 122°F.
●Do not dispose of your battery near fire or with
hazardous or flammable materials.
●When riding in a car,do not leave your phone or set
up the hands-free kit near the air bag. If wireless
equipment is improperly installed and the air bag is
deployed, you may be seriously injured.
●Do not use a hand-held phone while driving.
●Do not use the phone in areas where its use is
prohibited. (For example: aircraft)
Important Safety Precautions
VX7100 1
Important Safety Precautions
●Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as
abathroom.
●Do not use harsh chemicals (such as alcohol,
benzene, thinners, etc.) or detergents to clean your
phone. This could cause a fire.
●Do not drop, strike, or shake your phone severely. It
may harm the internal circuit boards of the phone.
●Do not use your phone in high explosive areas as the
phone may generate sparks.
●Do not damage the power cord by bending, twisting,
pulling, or heating. Do not use the plug if it is loose as
it may cause electric shock or fire.
●Do not place any heavy items on the power cord. Do
not allow the power cord to be crimped as it may
cause electric shock or fire.
●Do not handle the phone with wet hands while it is
being charged. It may cause an electric shock or
seriously damage your phone.
●Do not disassemble the phone.
2 VX7100
●Do not place or answer calls while charging the
phone as it may short-circuit the phone and/or cause
electric shock or fire.
●Do not hold or let the antenna come in contact with
your body during a call.
●Make sure that no sharp-edged items, such as
animal’s teeth or nails, come into contact with the
battery. This could cause a fire.
●Store the battery out of reach of children.
●Be careful that children do not swallow any parts
(such as earphone, connection parts of the phone,
etc.) This could cause asphyxiation or suffocation
resulting in serious injury or death.
●Unplug the power cord and charger during lightning
storms to avoid electric shock or fire.
●Only use the batteries and chargers provided by LG.
The warranty will not be applied to products provided
by other suppliers.
●Only authorized personnel should service the phone
and its accessories. Faulty installation or service may
result in accidents and consequently invalidate the
warranty.
●An emergency call can be made only within a service
area. For an emergency call, make sure that you are
within a service area and that the phone is turned on.
VX7100 3
Table of Contents
Important Safety Precautions .1
Welcome . . . . . . . . . . . . . . . . . . . .8
Technical Details . . . . . . . . . . . . .9
Important Information . . . . . . . . . . . .9
Phone Overview . . . . . . . . . . . .12
Installing the Battery . . . . . . . . . . . . .14
Removing the Battery . . . . . . . . . . .14
Menus Overview . . . . . . . . . . . .15
Getting Started with Your
Phone . . . . . . . . . . . . . . . . . . . . . .18
Charging the Battery . . . . . . . . . . . .18
Charging with USB . . . . . . . . . . . . . .18
Battery Temperature Protection . . .18
Battery Charge Level . . . . . . . . . . . .19
Signal Strength . . . . . . . . . . . . . . . . .19
Turning the Phone On and Off . . . .19
Turning the Phone On . . . . . . . . . .19
Turning the Phone Off . . . . . . . . . .19
Making Calls . . . . . . . . . . . . . . . . . . .19
Correcting Dialing Mistakes . . . . . .19
Redialing Calls . . . . . . . . . . . . . . . . . .19
Receiving Calls . . . . . . . . . . . . . . . . . .20
Screen Icons . . . . . . . . . . . . . . . . . . . .20
Quick Access to Convenient
Features . . . . . . . . . . . . . . . . . . . .21
Vibrate Mode . . . . . . . . . . . . . . . . . . .21
Sounds Off . . . . . . . . . . . . . . . . . . . . . .21
Mute Function . . . . . . . . . . . . . . . . . . .21
Volume Quick Adjustment . . . . . . . .21
Call Waiting . . . . . . . . . . . . . . . . . . . . .21
Caller ID . . . . . . . . . . . . . . . . . . . . . . . .21
Voice Commands . . . . . . . . . . . . . . . .21
Entering and Editing
Information . . . . . . . . . . . . . . . . .22
Text Input . . . . . . . . . . . . . . . . . . . . . . .22
Contacts in Your Phone’s
Memory . . . . . . . . . . . . . . . . . . . .23
Storing Basics . . . . . . . . . . . . . . . . . .23
Customizing Individual Entries . . . .23
Speed Dial . . . . . . . . . . . . . . . . . . . . . .23
Storing a Number with Pauses . . .24
Adding Another Phone Number . .24
Changing the Default Number . . . .25
Deleting . . . . . . . . . . . . . . . . . . . . . . . .25
Speed Dialing . . . . . . . . . . . . . . . . . . .26
CONTACTS . . . . . . . . . . . . . . . . . . . .27
1. New Contact . . . . . . . . . . . . . . . . . .27
2. Contact List . . . . . . . . . . . . . . . . . . .27
3. Groups . . . . . . . . . . . . . . . . . . . . . . .27
4. Speed Dials . . . . . . . . . . . . . . . . . . .28
5. In Case of Emergency (ICE) . . . .28
6. My Name Card . . . . . . . . . . . . . . . .29
7. Favorites . . . . . . . . . . . . . . . . . . . . . .30
MESSAGING . . . . . . . . . . . . . . . . . .31
1. New Message . . . . . . . . . . . . . . . .31
1.1 TXT Message . . . . . . . . . . . . . . .32
1.2 Picture Message . . . . . . . . . . . .34
1.3 Voice Message . . . . . . . . . . . . . .36
2. Inbox . . . . . . . . . . . . . . . . . . . . . . . .36
3. Sent . . . . . . . . . . . . . . . . . . . . . . . . .38
4. Drafts . . . . . . . . . . . . . . . . . . . . . . . .39
4 VX7100
5. Voicemail . . . . . . . . . . . . . . . . . . . .39
6. Wireless Sync Email . . . . . . . . . . .40
7. Mobile IM . . . . . . . . . . . . . . . . . . . .40
8. Email . . . . . . . . . . . . . . . . . . . . . . . . .40
9. Chat . . . . . . . . . . . . . . . . . . . . . . . . .40
Messaging Settings . . . . . . . . . . . . .40
1. Entry Mode (T9 Word/ Abc/ ABC/
123/ T9 Palabra) . . . . . . . . . . . . . . .41
2. Auto Save Sent (On/ Off/
Prompt) . . . . . . . . . . . . . . . . . . . . . .41
3. Auto Erase Inbox (On/ Off) . . . .41
4. Messaging Font Size . . . . . . . . .41
5. TXT Auto View (On/Off) . . . . . . .41
6. TXT Auto Scroll (On/Off) . . . . . .41
7. Multimedia Auto Receive
(On/Off) . . . . . . . . . . . . . . . . . . . . . .41
8. Quick Text . . . . . . . . . . . . . . . . .41
9. Voicemail # . . . . . . . . . . . . . . . . .41
0. Callback # . . . . . . . . . . . . . . . . . .41
*. Signature(None/ Custom) . . . . .41
Erasing Messages . . . . . . . . . . . . . . .42
RECENT CALLS . . . . . . . . . . . . . . . .43
1. Missed . . . . . . . . . . . . . . . . . . . . . . .43
2. Received . . . . . . . . . . . . . . . . . . . . .43
3. Dialed . . . . . . . . . . . . . . . . . . . . . . . .44
4. All . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
5. View Timers . . . . . . . . . . . . . . . . . . .45
MY RINGTONES . . . . . . . . . . . . . . .46
MEDIA CENTER . . . . . . . . . . . . . . . .47
1. Tunes & Tones . . . . . . . . . . . . . . . .47
1.1 Get New Ringtones . . . . . . . . . .47
1.2 My Ringtones . . . . . . . . . . . . . . .48
1.3 My Sounds . . . . . . . . . . . . . . . . .48
2. Pictures . . . . . . . . . . . . . . . . . . . . . .49
2.1 Get New Pictures . . . . . . . . . . . .49
2.2 My Pictures . . . . . . . . . . . . . . . .49
2.3 Take Picture . . . . . . . . . . . . . . . .50
2.4 Online Album . . . . . . . . . . . . . . .51
3. Games . . . . . . . . . . . . . . . . . . . . . . . .51
4. Mobile Web . . . . . . . . . . . . . . . . . .52
5. Browse & Download . . . . . . . . . .54
6. Extras . . . . . . . . . . . . . . . . . . . . . . . .54
MY PICTURES . . . . . . . . . . . . . . . . .55
VZ NAVIGATOR . . . . . . . . . . . . . . . .56
BLUETOOTH . . . . . . . . . . . . . . . . . . .57
SETTINGS & TOOLS . . . . . . . . . . . .58
1. My Verizon . . . . . . . . . . . . . . . . . . . .58
2. Tools . . . . . . . . . . . . . . . . . . . . . . . . .58
2.1 Voice Commands . . . . . . . . . . . .58
2.1.1 Call <Name or Number> . . .59
2.1.2 Send Msg to <Name or
Number> . . . . . . . . . . . . . . . . . . . . .59
2.1.3 Go to <Menu> . . . . . . . . . . .59
2.1.4 Check <Item> . . . . . . . . . . . .59
2.1.5 Contacts <Name> . . . . . . . .60
2.1.6 My Verizon . . . . . . . . . . . . . . .60
2.1.7 Help . . . . . . . . . . . . . . . . . . . .60
2.2 Calculator . . . . . . . . . . . . . . . . . .60
2.3 Ez Tip Calculator . . . . . . . . . . . . .60
2.4 Calendar . . . . . . . . . . . . . . . . . . .61
2.5 AlarmClock . . . . . . . . . . . . . . . .62
2.6 Stopwatch . . . . . . . . . . . . . . . . . .62
VX7100 5
Table of Contents
2.7 World Clock . . . . . . . . . . . . . . . .62
2.8 Notepad . . . . . . . . . . . . . . . . . . .63
2.9 USB Mass Storage . . . . . . . . . .63
3. Bluetooth® Menu . . . . . . . . . . . .63
3.1 Add New Device . . . . . . . . . . . .64
Turn On . . . . . . . . . . . . . . . . . . . . . . .65
My Device Info . . . . . . . . . . . . . . . . .66
Discovery Mode . . . . . . . . . . . . . . . .66
Supported Profiles . . . . . . . . . . . . . .67
Auto Pair Handsfree . . . . . . . . . . . . .67
4. Sounds Settings . . . . . . . . . . . . . . .68
4.1 Easy Set-up . . . . . . . . . . . . . . . . .68
4.2 Master Volume . . . . . . . . . . . . .68
4.3 Call Sounds . . . . . . . . . . . . . . . .68
4.3.1 Call Ringtone . . . . . . . . . . .69
4.3.2 Call Vibrate . . . . . . . . . . . . .69
4.4 Alert Sounds . . . . . . . . . . . . . . . .69
4.5 Keypad Volume . . . . . . . . . . . . .70
4.6 Digit Dial Readout . . . . . . . . . . .70
4.7 Service Alerts . . . . . . . . . . . . . .70
4.8 Power On/Off..............70
4.9 Voice Clarity . . . . . . . . . . . . . . . .71
5. Display Settings . . . . . . . . . . . . . . .71
5.1 Easy Set-up . . . . . . . . . . . . . . . . .71
5.2 Banner . . . . . . . . . . . . . . . . . . .71
5.2.1 Personal Banner . . . . . . . . .72
5.2.2 ERI Banner . . . . . . . . . . . . .72
5.3 Backlight . . . . . . . . . . . . . . . . . .72
5.4 Wallpaper . . . . . . . . . . . . . . . . . .73
5.5 Display Themes . . . . . . . . . . . . .73
5.6 Main Menu Settings . . . . . . . . .73
5.7 Font Size . . . . . . . . . . . . . . . . . . .74
5.8 Menu Fonts . . . . . . . . . . . . . . . .74
5.9 Clock Format . . . . . . . . . . . . . . .75
6. Phone Settings . . . . . . . . . . . . . . .75
6.1 Airplane Mode . . . . . . . . . . . . . .75
6.2 Set Shortcuts . . . . . . . . . . . . . . .76
6.2.1 Set My Shortcuts . . . . . . . . .76
6.2.2 Set Directional Keys . . . . . . .76
6.3 Voice Commands . . . . . . . . . . . .77
6.4 Language . . . . . . . . . . . . . . . . . .77
6.5 Location . . . . . . . . . . . . . . . . . . .77
6.6 Current Country . . . . . . . . . . . . .78
6.7 Security . . . . . . . . . . . . . . . . . . .78
6.7.1 Edit Codes . . . . . . . . . . . . .78
6.7.2 Restrictions . . . . . . . . . . . .79
6.7.3 Phone Lock . . . . . . . . . . . .79
6.7.4 Lock Phone Now . . . . . . . .80
6.7.5 Reset Default . . . . . . . . . .80
6.7.6 RestorePhone . . . . . . . . . .80
6.8 System Select . . . . . . . . . . . . . .81
6.9 NAM Select . . . . . . . . . . . . . . . .81
6.0 CDG2 . . . . . . . . . . . . . . . . . . . . .81
7. Call Settings . . . . . . . . . . . . . . . . . .81
7.1 Answer Options . . . . . . . . . . . . .81
7.2 Auto Retry . . . . . . . . . . . . . . . . . .82
7.3 TTY Mode . . . . . . . . . . . . . . . . .82
7.4 One Touch Dial . . . . . . . . . . . . .84
7.5 Voice Privacy . . . . . . . . . . . . . . . .84
7.6 DTMF Tones . . . . . . . . . . . . . . . .84
7.7 Assisted Dialing . . . . . . . . . . . . .84
8. Memory . . . . . . . . . . . . . . . . . . . . . .85
6 VX7100
9. Phone Info . . . . . . . . . . . . . . . . . . . .85
9.1 My Number . . . . . . . . . . . . . . . . . .86
9.3 Icon Glossary . . . . . . . . . . . . . . .86
9.4 Software Update . . . . . . . . . . . .86
Safety . . . . . . . . . . . . . . . . . . . . . .88
TIA Safety Information . . . . . . . . . .88
Exposure to Radio Frequency
Signal . . . . . . . . . . . . . . . . . . . . . . . .88
Antenna Care . . . . . . . . . . . . . . . . .88
Phone Operation . . . . . . . . . . . . . . .88
Tips on Efficient Operation . . . . . . .89
Driving . . . . . . . . . . . . . . . . . . . . . . .89
Electronic Devices . . . . . . . . . . . . .89
Pacemakers . . . . . . . . . . . . . . . . . .89
Hearing Aids . . . . . . . . . . . . . . . . . .90
Other Medical Devices . . . . . . . . . .90
Health Care Facilities . . . . . . . . . . .90
Vehicles . . . . . . . . . . . . . . . . . . . . . .90
Posted Facilities . . . . . . . . . . . . . . .90
Aircraft . . . . . . . . . . . . . . . . . . . . . . .90
Blasting Areas . . . . . . . . . . . . . . . . .90
Potentially Explosive Atmosphere.90
For Vehicles Equipped with an Air
Bag . . . . . . . . . . . . . . . . . . . . . . . . . .91
Safety Information . . . . . . . . . . . . .91
Charger and Adapter Safety . . . . . .92
Battery Information and Care . . . . .92
Explosion, Shock, and Fire Hazards93
General Notice . . . . . . . . . . . . . . . .93
Caution: Avoid potential hearing
loss. . . . . . . . . . . . . . . . . . . . . . . . . . . .95
FDA Consumer Update . . . . . . . . .97
10 Driver Safety Tips . . . . . . . . . . .104
Consumer Information on SAR .107
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices . . . . . . . . . . . . . . . . . . . . . .108
Accessories . . . . . . . . . . . . . . .111
LIMITED WARRANTY
STATEMENT . . . . . . . . . . . . . .112
Glossary . . . . . . . . . . . . . . . . . . .115
Terminology . . . . . . . . . . . . . . . . . .115
Acronyms and Abbreviations . .115
Glossary . . . . . . . . . . . . . . . . . . .117
VX7100 7
Welcome
Thank you for choosing the VX7100
cellular phone designed to operate
with the latest digital mobile
communication technology, Code
Division Multiple Access (CDMA).
Along with the many advanced
features of the CDMA system, such
as greatly enhanced voice clarity,
this compact phone offers:
●Built-in VGA Camera
●Mobile Web 2.0
●Sleek and Compact Design
●Large, easy-to-read, 8-line
backlit LCD with status icons
●Media Center capable for game,
wallpaper and ringtone
downloads
●23-key keypad and Directional
Key
●Long battery standby and talk
time
●Easy operation using menu-
driven interface with prompts
●Paging, messaging, Voicemail,
caller ID, IM and chat
●Advanced Voice Recognition
●Quick calling functions including,
auto answer, auto retry, 999
speed dials, and voice
commands
●Flash Wallpaper with fun
animations
●Bilingual (English and Spanish)
Capability
●Bluetooth®wireless technology
(for certain profiles)
NOTE
The Bluetooth®word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by LG
Electronics is under license. Other
trademarks and trade names are
those of their respective owners.
NOTE
Find the interactive user guide on the
web for your convenience where you
can freely surf and interactively learn
how to use your phone step-by-step.
Go to http://www.verizonwireless.com
->
Support
->
Phones & Devices
->
then choose your phone model
->
then select Equipment Guide.
8 VX7100
Important Information
This user’s guide provides important
information on the use and
operation of your phone. Please
read this guide carefully prior to
using the phone to be able to use
your phone to its greatest
advantage and to prevent any
accidental damage or misuse. Any
unapproved changes or
modifications will void your
warranty.
FCC Part 15 Class B Compliance
This device and its accessories
comply with part 15 of FCC rules.
Operation is subject to the following
two conditions: (1) This device and
its accessories may not cause
harmful interference, and (2) this
device and its accessories must
accept any interference received,
including interference that causes
undesired operation.
Information to User
This equipment has been tested
and found to comply with the limits
for a Class B digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation.
This equipment generates, uses
and can radiate radio frequency
energy and, if not installed and
used in accordance with the
instructions, may cause harmful
interference to radio
communications.
However, there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
-Reorient or relocate the receiving
antenna
-Increase the separation between
the equipment and receiver
-Connect the equipment into an
outlet on a circuit different from
that which the receiver is
connected.
-Consult the dealer or an
experienced radio/TV technician
for help.
Modifications not expressly
approved by the manufacturer
could void the user’sauthority to
operated the equipment under FCC
rules.
Technical Details
The VX7100 is an all digital phone
that operates on both Code Division
Multiple Access (CDMA)
frequencies: Cellular services at 800
MHz and Personal Communication
Services (PCS) at 1.9 GHz.
CDMA technology uses a feature
called DSSS (Direct Sequence
Spread Spectrum) that enables the
phone to keep communication from
Technical Details
VX7100 9
Technical Details
being crossed and to use one
frequency channel by multiple
users in the same specific area.
This results in a 10-fold capacity
increase when compared with
analog mode. In addition, features
such as soft / softer handoff, hard
handoff, and dynamic RF power
control technologies combine to
reduce call interruptions.
The Cellular and PCS CDMA
networks consist of MSO (Mobile
Switching Office), BSC (Base
Station Controller), BTS (Base
Station Transmission System), and
MS (Mobile Station).
*TSB -74: Protocol between an IS-
95A system and ANSI J-STD-008
1xRTT system receives twice as
many subscribers in the wireless
section as IS-95. Its battery life is
twice as long as IS-95.
The following table lists some major
CDMA standards.
FCC RF Exposure Information
WARNING! Read this information
before operating the phone.
In August 1996, the Federal
Communications Commission (FCC)
of the United States, with its action
in Report and Order FCC 96-326,
adopted an updated safety standard
for human exposure to Radio
Frequency (RF) electromagnetic
energy emitted by FCC regulated
transmitters. Those guidelines are
consistent with the safety standard
previously set by both U.S. and
10 VX710010
CDMA Standard
Designator Description
Basic Air
Interface
TIA/EIA-95A
TSB-74
ANSI J-STD-008
TIA/EIA-IS2000
CDMA Dual-Mode Air Interface
14.4kbps radio link protocol and
inter-band operations
IS-95adapted for PCS frequency band CDMA2000
1xRTT Air Interface
Network
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-1
24
MAS-BS
PCSC-RS
Intersystem operations
Non-signaling data comm.
Service
TIA/EIA/IS-96-B
TIA/EIA/IS-637
TIA/EIA/IS-657
IS-801
TIA/EIA/IS-707-A
Speech CODEC
Short Message Service
PacketData
Position Determination Service (gpsOne)
High Speed PacketData
VX7100 11
international standards bodies. The
design of this phone complies with
the FCC guidelines and these
international standards.
Bodily Contact During Operation
This device was tested for typical
use with the back of the phone kept
0.78 inches (2 cm) from the body. To
comply with FCC RF exposure
requirements, a minimum
separation distance of 0.78 inches
(2 cm) must be maintained between
the user’s body and the back of the
phone, including the antenna,
whether extended or retracted.
Third-party belt-clips, holsters, and
similar accessories containing
metallic components should not be
used. Avoid the use of accessories
that cannot maintain 0.78 inches (2
cm) distance between the user’s
body and the back of the phone and
have not been tested for
compliance with FCC RF exposure
limits.
Vehicle-Mounted External Antenna
(Optional, if available.)
To satisfy FCC RF exposure
requirements, keep 8 inches (20 cm)
between the user / bystander and
vehicle-mounted external antenna.
For more information about RF
exposure, visit the FCC website at
www.fcc.gov.
Caution
Use only the supplied antenna. Use
of unauthorized antennas (or
modifications to the antenna) could
impair call quality, damage the
phone, void your warranty and/or
violate FCC regulations.
Don't use the phone with a
damaged antenna. A damaged
antenna could cause a minor skin
burn.
Contact your local dealer for a
replacement antenna.
Phone Overview
1. Earpiece Lets you hear the caller and
automated prompts.
2. LCD Screen Displays messages and indicator
icons.
3. OK Key / Directional Key Use the OK Key
to select the function displayed at the bottom
of the LCD between the Left and Right Soft Key
functions. Use the Directional Key to
scroll through the menu items and highlight a
specific field or object by moving up, down, left
or right.
4. Left Soft Key Use to access Messaging menu.
5. SEND Key Use to make and answer calls.
6. Alphanumeric Keypad Use to enter numbers
and characters and select menu items.
7. International Call Prefix Key To make an
international call, press and hold for
2or 3 seconds. + is the international calling
code.
8. Camera Lens Used to take a photo. Keep it
clean for optimal photo quality.
12 VX7100
15. Side Keys /
Volume Keys
Up/Down
9. Right Soft Key
2. LCD Screen
3. OK Key /
Directional Key
16. Speakerphone
Key
4. Left Soft Key
17. Accessory
Charger
Port
1. Earpiece
5. SEND Key
12. Vibrate Mode Key
11. CLR / Voice Commands Key
10. PWR/END Key
6. Alphanumeric Keypad
18. Camera
Key
14. 2.5 mm
Headset
Jack
7. International Call Prefix Key
13. Microphone
8. Camera Lens
VX7100 13
Battery
Battery Cover
NOTES •
It’s important to fully charge the battery before using the phone for the first time.
•
Battery life and signal strength are significant factors (among others) that affect your
phone’s ability to send/receive calls.
Rear view
9. Right Soft Key Use to access Contact List.
10. PWR / END Key Use to turn the power on/off
and to end a call. Also returns to standby
mode.
11. CLR / Voice Commands Key Deletes single
spaces or characters with a quick press, but
press and hold to delete entire words. Also
backs out of menus, one level at a time.
Use for quick access to Voice Commands.
12. Vibrate Mode Key Use to set Vibrate mode
(from standby mode press and hold for about
3seconds).
13. Microphone Allows other callers to hear you
clearly when you are speaking to them.
14. 2.5 mm Headset Jack Allows you to plug in an
optional headset for convenient, hands-free
conversations.
15. Side Keys / Volume Keys Up/Down Use to
adjust the Master Volume in standby mode*
and the Earpiece Volume during a call.
16. Speakerphone Key Use to change to
speakerphone mode.
17. Accessory Charger Port Connects the phone
to the battery charger, or other compatible
accessory.
18. Camera Key Use for quick access to Camera
function. Press the camera key turns the
handset in to camera mode to take pictures.
*Standby mode is when the phone is waiting for input from you.
No menu is displayed and the phone isn’t performing any
action. It’s the starting point for all of the instruction steps.
This User Manual gives navigation instructions according to the
default "list" Main Menu Layout in the Display Settings menu.
If other themes or menus are set, navigating the phone's menus
may be different.
Phone Overview
14 VX7100
Installing the Battery
1. Insert the bottom of the battery into the
opening on the back of the phone.
2. Push the battery down until it clicks
into place.
3. Place the battery cover over the
opening on the back of the phone,
then slide it upward until it clicks
into place.
Removing the Battery
1. Turn the phone off, then slide the
battery cover downward to remove
it.
2. Remove the battery from the battery
compartment by lifting the top of the
battery.
Contacts
Contacts
1. New Contact
2. Contact List
3. Groups
4. Speed Dials
5. In Case of Emergency
6. My Name Card
7. Favorites
Messaging
Messaging
1. New Message
1. TXT Message
2. PictureMessage
3. Voice Message
2. Inbox
3. Sent
4. Drafts
5. Voicemail
6. Wireless Sync Email
7. Mobile IM
8. Email
9. Chat
Recent Calls
Recent Calls
1. Missed
2. Received
3. Dialed
4. All
5. View Timers
My Ringtones
My Ringtones
Media Center
Media Center
1. Tunes & Tones
1. Get New Ringtones
2. My Ringtones
3. My Sounds
2. Pictures
1. Get New Pictures
2. My Pictures
3. Take Picture
4. Online Album
3. Games
4. Mobile Web
5. Browse & Download
6. Extras
My Pictur
My Pictures
es
Menus Overview
VX7100 15
Menus Overview
VZ Navigator
VZ Navigator
Bluetooth
Bluetooth
Settings & T
Settings & Tools
ools
1. My Verizon
2. Tools
1. Voice Commands
2. Calculator
3. Ez Tip Calculator
4. Calendar
5. Alarm Clock
1. Alarm 1
2. Alarm 2
3. Alarm 3
6. Stopwatch
7. World Clock
8. Notepad
9. USB Mass Storage
3. Bluetooth Menu
1. Add New Device
4. Sounds Settings
1. Easy Set-up
2. Master Volume
3. Call Sounds
1. Call Ringtone
2. Call Vibrate
3. Call Alert
4. Alert Sounds
1. TXT Message
2. Multimedia Message
3. Voicemail
4. Emergency Tone
5. Missed Call
5. Keypad Volume
6. Digit Dial Readout
7. Service Alerts
1. ERI
2. Minute Beep
3. Call Connect
4. Charge Complete
8. Power On/Off
1. Power On
2. Power Off
9. Voice Clarity
5. Display Settings
1. Easy Set-up
2. Banner
1. Personal Banner
2. ERI Banner
3. Backlight
1. Display
2. Keypad
4. Wallpaper
1. My Pictures
2. Fun Animations
5. Display Themes
6. Main Menu Settings
7. Font Size
8. Menu Font
9. Clock Format
6. Phone Settings
1. Airplane Mode
2. Set Shortcuts
3. Voice Commands
4. Language
5. Location
6. Current Country
7. Security
16 VX7100
1. Edit Codes
2. Restrictions
3. Phone Lock
4. Lock Phone Now
5. Reset Default
6. Restore Phone
8. System Select
9. NAM Select
10. CDG2
7. Call Settings
1. Answer Options
2. Auto Retry
3. TTY Mode
4. One Touch Dial
5. Voice Privacy
6. DTMF Tones
7. Assisted Dialing
8. Memory
9. Phone Info
1. My Number
2. SW/HW Version
3. Icon Glossary
4. Software Update
10. Set-up Wizard
VX7100 17
Some content in this user guide
may differ from your phone
depending on the phone
software. Features and
specifications are subject to
change without prior notice.
Charging the Battery
To use the charger provided with your
phone:
NOTICE
Please use only an approved
charging accessory to charge your
LG phone. Improper handling of the
charging port, as well as the use of
an incompatible charger, may cause
damage to your phone and void the
warranty.
1. Plug the end of the AC adapter
into the phone’s charger port and
the other end into an electrical
outlet.
2. The charge time varies depending
upon the battery level.
Charging with USB
You can use your computer to
charge your phone. Connect one
end of the USB cable to the
charging accessory port on your
phone and the other end to a
highpower USB port on your PC.
But prior to do these steps, you
need to have proper USB drivers.
LG USB Driver is downloadable
below site; http://us.lge.com > Click
SUPPORT > Click DOWNLOAD and
search for LG USB Driver.
NOTE
Low power USB port is not supported,
such as the USB port on your
keyboard or bus-powered USB hub.
USB driver should be installed before
charging with USB.
BatteryTemperature Protection
If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on,
amessage pops up alerting you
that the phone was powered off for
your safety.
Getting Started with Your Phone
18 VX7100
NOTICE
Please make sure that the LG logo
faces down before inserting a
charger or data cable into the
charger port of your phone.
Battery Charge Level
You can find the battery charge
level at the top right of the
LCD screen. When the charge level
becomes low, the battery sensor
sounds a warning tone, blinks the
battery icon, and displays a
warning message. As the charge
level approaches empty,the phone
automatically switches off without
saving.
Signal Strength
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon: the
more bars, the stronger the signal.
If you’re having problems with
signal quality,move to an open area
or, when inside a building, try
moving near a window.
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an external
power source.
2. Press (located above the
key on the keypad) until the
LCD screen lights up.
Turning the Phone Off
Press and hold until the
display turns off.
Making Calls
1. Make sure the phone is turned
on.
If not, open the flip and press
for about three seconds.
If necessary, enter the lock code.
2. Enter the phone number.
3. Press .
4. Press to end the call.
NOTE
Your phone has a Voice Commands
feature that also lets you make calls
by saying a phone number, name, or
location.
Correcting Dialing Mistakes
Press once to erase the last
digit entered, or hold it down for at
least two seconds to delete all the
digits.
Redialing Calls
Press twice to redial the last
number dialed.
VX7100 19
Getting Started with Your Phone
Receiving Calls
1. When the phone rings or
vibrates, you can answer the call
by simply opening the flip.
NOTE
If the Answer Options setting is set to
Any Key, you can:
●
Open the flip and press the Left Soft
Key [Quiet] to mute the
ringing or vibration for that call.
●
Open the flip and press the Right
Soft Key [Ignore] to end the
call or send it directly to Voicemail.
2. Press to end the call, or
simply close the flip.
Screen Icons
When the phone is on, the top line
of the LCD screen displays phone
status icons.
Tosee the icon glossary, with the
flip open, go to MENU -> Settings &
Tools -> Phone Info -> Icon
Glossary on your phone.
20 VX7100
Vibrate Mode
Sets the phone to vibrate instead of
ring ( is displayed). To set
Vibrate Mode, Press and hold .
To return to Normal Mode, press
and hold .
Sounds Off
Quickly deactivate your phone's
sounds when you're in a place
where phone sounds would be
disruptive.
From standby mode Press and hold
the lower side volume key for 3
seconds. To return to normal
sounds mode, press and hold the
upper side key.
Mute Function
The Mute Function prevents the
transmission of your voice to the
caller.Toquickly activate Mute
while in a call, press the Left Soft
Key [Mute],then to unmute
press the Left Soft Key
[Unmute].
Volume Quick Adjustment
Quickly adjust ringer and earpiece
volumes by pressing the upper side
volume key on the left side of the
phone to increase and lower
volume side key to decrease.
NOTE
The earpiece volume can only be
adjusted during a call and Key Beep
volume can only be adjusted through
the Menu.
Call Waiting
During a call, one beep indicates
another incoming call.
Press to answer it and put the
first call on hold. Press again
to return to the first call.
Caller ID
Caller ID displays the number
and/or name and/or picture if
applicable of the person calling
when your phone rings.
Voice Commands
Voice Commands allow you to do
things by verbal command (e.g.,
make calls, confirm Voicemail, etc.).
Press the Voice Commands Key
(on the left side of the phone) and
follow the prompts.
NOTE
Voice Commands can also be started
with the designated key on your
Bluetooth®device. Please check the
manual of the Bluetooth®device for
further instructions.
Quick Access to Convenient Features
VX7100 21
Entering and Editing Information
Text Input
The following key functions are
available to help with text entry:
Left Soft Key:Press to
change text input mode.
Shift:Press to change
capitalization (initial cap,
caps lock, lowercase).
Next:Press to display other
matching words in the
database in T9 word mode.
Space:Press to complete a
word and insert a space.
Clear:Press to delete a
single space or character.
Hold to delete words.
Punctuation:Press to
insert punctuation.
Text Input Modes
In a text field, press the Left Soft
Key to display text modes.
T9 Word/ Abc/ ABC/ 123/ Symbols/
Quick Text/ T9 Palabra
22 VX7100
Storing Basics
1. With the flip open, enter a
number (max. 48 digits), then
press the Left Soft Key
[Save].
2. Use the Directional Key to
highlight Add New Contact/
Update Existing,then press .
3. Use the Directional Key to
highlight Mobile 1/ Home/ Work/
Mobile 2/ Fax,then press .
4. Enter a name (max. 32
characters), then press .
5. Press to exit, to call, or
the Right Soft Key [Options].
Customizing Individual
Entries
1. Press the Right Soft Key
[Contacts],then use the
Directional Key to highlight
an entry.
2. Press the Left Soft Key [Edit].
3. Use the Directional Key to
highlight the information to
customize.
4. Change the entry as you want,
then press to save your
changes.
Speed Dial
Allows you to set up your Speed
Dials.
1. Press the Right Soft Key
[Contacts],then use the
Directional Key to highlight
an entry.
2. Press the Left Soft Key
[Edit].
3. Use the Directional Key to
highlight a phone number,then
press the Right Soft Key
[Options].
4. Use the Directional Key to
highlight Set Speed Dial,then
press .
5. Enter a Speed Dial digit.
●Use the keypad, then press
.
●Use the Directional Key to
highlight the Speed Dial digit,
then press .
6. Press Yes to confirm, then
press to save.
Contacts in Your Phone’s Memory
VX7100 23
Contacts in Your Phone’s Memory
Storing a Number with
Pauses
Pauses allow you to enter
additional series of numbers to
access automated systems such as
Voicemail or credit billing numbers.
Pause types are: Wait (W) The
phone stops dialing until you press
the Left Soft Key [Release] to
advance to the next number. 2-Sec
Pause (P) The phone waits two
seconds before sending the next
string of digits.
1. With the flip open, enter the
number, then press the Right Soft
Key [Options].
2. Use the Directional Key to
highlight 2-Sec Pause or Wait,
then press .
3. Enter additional number(s) (e.g., pin
number,credit card number,etc.).
4. Press the Left Soft Key
[Save].
5. Choose Add New
Contact/Update Existing.
6. Choose Mobile
1/Home/Work/Mobile 2/Fax.
7. Continue entering information for
the Contact entry as necessary.
Adding Another Phone
Number
From standby mode
1. With the flip open, enter a phone
number, then press the Left Soft
Key [Save].
2. Use the Directional Key to
highlight Update Existing,then
press .
3. Use the Directional Key to
highlight an existing entry,then
press .
4. Use the Directional Key to
highlight Mobile 1/ Home/ Work/
Mobile 2/ Fax,then press to
save.
From the Contact List Screen
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key to
highlight an entry, then press the
Left Soft Key [Edit].
3. Use the Directional Key to
highlight the phone number field
to add, then enter the number
and press to save.
24 VX7100
Changing Saved Information
To edit any information you stored,
access the Edit Contacts screen:
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key to
highlight a Contact entry, then
press the Left Soft Key [Edit].
3. Use the Directional Key to
highlight the field you want to
change.
4. Make the changes, then press
.
Adding a Pause to a Contact Entry
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key to
highlight a Contact entry, then
press the Left Soft Key [Edit].
3. Use the Directional Key to
highlight the number,then press
the Right Soft Key [Options].
4. Press Wait or 2-Sec
Pause.
5. Enter additional number(s), then
press .
Changing the Default
Number
The Default Number is the phone
number you entered when you
created the Contact. Another
number can be saved as the
Default Number.
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key to
highlight an entry.
3.
Press the Left Soft Key [Edit].
4. Use the Directional Key to
highlight a phone number,then
press the Right Soft Key
[Options].
5. Use the Directional Key to
highlight Set As Default,then
press .
6. Press Yes to set the new
number as the default.
Aconfirmation message is
displayed.
7. Press again to save.
Deleting
Deleting a Contact Entry
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key to
highlight an entry.
VX7100 25
Contacts in Your Phone’s Memory
3. Press the Right Soft Key
[Options].
4. Press Erase.
5. Press Yes to confirm.
Deleting a Speed Dial
1. Press the Right Soft Key
[Contacts].
2. Use the Directional Key to
highlight a Contact entry to edit
and press [VIEW].
3. Select the phone number with
the Speed Dial, then press
[EDIT].
4. Press the Right Soft Key
[Options].
5. Press Remove Speed Dial.
6. Press Yes to confirm.
7. Press again to save.
Speed Dialing
Allows you to make phone calls
quickly and easily to numbers
stored in Contacts.
NOTE
Speed Dial 1 is for Voicemail.
Speed Dial 411 is for Directory
Assistance.
Single Digit Speed Dials
Press and hold the Speed Dial digit.
Your phone recalls the phone
number from your Contacts,
displays it, and dials it for you.
Multiple Digit Speed Dials
When you press and hold a number
key, it signals the phone to attempt
aSpeed Dial transmission. To dial
Speed Dials with multiple digits,
press the first digit(s) as necessary,
then press and hold the last digit.
For example, to Speed Dial 25,
press ,then press and hold
.
NOTE
You can also enter the Speed Dial
digit(s), then press .
Speed Dials 95, 96, 97, 98, and 99
Speed Dials 95, 96, 97, 98, and 99
are preset to access certain phone
account information: 95 (#Warranty
Center), 96(#Data), 97 (#BAL), 98
(#MIN), and 99 (#PMT). Unlike
Speed Dial 1, these can be changed
if you want.
NOTE
411is not available for
Set
or
Remove
.
26 VX7100
CONTACTS
C
CO
ON
NT
TA
AC
CT
TS
S
The Contacts Menu allows you to
store names, phone numbers and
other information in your phone’s
memory.
SHORTCUT
Pressing the Right Soft Key
is a hot key to Contact List.
1. New Contact
Allows you to add a new number to
your Contact List.
NOTE
Using this submenu, the number is
saved as a new Contact, not into an
existing Contact.
1. Press [MENU].
2. Press Contacts.
3. Press New Contact.
4. Enter the name and press the
Directional Key downward.
5. Use the Directional Key to
highlight the phone number type.
6. Enter the number and press .
NOTE
For more detailed information, see
page 23.
2. Contact List
Allows you to view your Contact
List.
1. Press [MENU].
2. Press Contacts.
3. Press Contact List.
4. Use the Directional Key to
scroll through your Contacts
alphabetically.
●Press the Right Soft Key
[Options] to select one of the
following:
New Contact/ Erase/ New
TXT Message/ New Picture
Message/ New Voice
Message/ Set As ICE Contact/
Call/ Erase All/ Send Name
Card
●Press the Left Soft Key
[Edit] to edit.
●Press to view the entry
details.
TIP
Use the Go To field, for quick access
to an entry without scrolling. For
example, to go to "Vet", enter the
letter V
.
VX7100 27
CONTACTS
3. Groups
Allows you to view your grouped
Contacts, add a new group, change
the name of a group, delete a
group, or send a message to
everyone in the selected group.
1. Press [MENU].
2. Press Contacts.
3. Press Groups.
4. View a Group
Use the Directional Key to
highlight a group, then press .
Add a New Group
Press the Left Soft Key
[New] to add a new group to the
list.
Options Using a Group
Press the Right Soft Key
[Options] to select one of the
following:
New TXT Message/ New
Picture Message/ New Voice
Message/ Rename/ Erase/ Add/
Send Name Card
4. Speed Dials
Allows you to view your list of
Speed Dials or designate Speed
Dials for numbers entered in your
Contacts.
1. Press [MENU].
2. Press Contacts.
3. Press Speed Dials.
4. Use the Directional Key to
highlight the Speed Dial position,
or enter the Speed Dial digit and
press [SET].
5. Use the Directional Key to
highlight the Contact then press
. (For Contacts with multiple
numbers, highlight the number
for the Speed Dial, then press
.)
6. Press Yes to confirm.
A confirmation message is
displayed.
28 VX7100
5. In Case of Emergency
(ICE)
This menu allows you to store
names, phone numbers and other
information, which will be very
helpful in case of emergency. Also,
it allows you to add, read, edit, or
erase the notes about yourself as
necessary in case an emergency
takes place.
1. Press [MENU].
2. Press Contacts.
3. Press In Case of
Emergency.
4. Use the Directional Key to
highlight Contact 1, 2, or 3, then
press [ADD].
5. Press to add Contact from
your Contact List.
Highlight the Contact, then press
.
ICE CONTACT ASSIGNED is
displayed.
OR
Press to enter information
not stored in your Contact List.
6. The generic Contact label
changes to the specified name.
Entering Your ICE Personal Info
1. Press [MENU].
2. Press Contacts.
3. Press In Case of
Emergency.
4. Use the Directional Key to
highlight Personal Info, then
press .
5. Use the Directional Key to
highlight one of the Note entries,
then press .
6. Enter information that would be
helpful in an emergency (e.g.,
your medical record number),
then press .
TIP
When you've assigned ICE Contacts
and your phone is locked, the Left
Soft Key appears as [ICE]
allowing the emergency information to
be viewed without unlocking the
phone.
VX7100 29
CONTACTS
6. My Name Card
Allows you to view all of your
personal Contact information
including name, phone numbers,
and email address in one entry.
1. Press [MENU].
2. Press Contacts.
3. Press My Name Card.
4. Press [EDIT] to enter your
personal Contact information.
5. Use the Directional Key to
scroll to the information you
want to enter.
6. Enter your information as
necessary, then press .
NOTE
Press the Right Soft Key
[Options]
to send your name card.
7. Favorites
Allows you to view all of your
personal Contact information
including name, phone numbers,
and email address in one entry.
1. Press [MENU].
2. Press Contacts.
3. Press Favorites.
4. Press [ADD]
30 VX7100
M
ME
ES
SS
SA
AG
GI
IN
NG
G
SHORTCUT
From standby mode, pressing the Left Soft Key
is a hot key to your MESSAGING.
Text messages, Picture messages,
and the Voicemail box become
available as soon as the phone is
powered on.
●Check types of messages by
pressing the Left Soft Key
[Messaging].
●Make a call to the callback
number (in Inbox) by pressing
during a message check.
Depending on the content and size
of your messages, the phone can
store well over 540 messages. The
information stored in the message
is determined by phone model and
service capability. Other limits to
available characters per message
may exist. Please check with your
service provider for system features
and capabilities.
New Message Alert
Your phone will alert you when you
have new messages.
1. The phone displays a message
on the screen.
2. The message icon ( ) is
displayed on the display screen.
In the case of a high priority
message, the icon will blink.
1. New Message
Allows you to send messages (Text,
Picture, and Voice). Each message
has a destination (Address) and
information (Message). These are
dependent upon the type of
message you want to send. You can
also attach files to your messages
including pictures, sounds, and
name cards.
MESSAGING
VX7100 31
MESSAGING
1.1 TXT Message
The Basics of Sending a Text
Message
1. Press the Left Soft Key
[Message].
2. Press New Message.
3. Press TXT Message.
4. Enter the phone number of the
recipient or the email address for
an email message. You can enter
up to 10 addresses for a single
message.
5. Press the Directional Key
downward.
6. Type your message in the text
field.
7. Press [SEND].
Customizing the Message Using
Options
●Editing the To: field
1. With the To field highlighted,
press the Right Soft Key
[Add].
2. Select the option(s) to customize.
From Contacts/ Recent Calls/
Groups
●Editing Text
1. With the Text field highlighted,
press the Right Soft Key
[Options].
2. Select the option(s) to customize.
Insert Quick Text Allows you to
add Quick Text.
Save As Draft Saves the
message into the Drafts folder.
Add Allows you to add Graphic,
Animation, Sound, Signature,
Name Card, or Address From
Contacts .
Copy Text Allows you to copy
text.
Paste Allows you to paste the
text you last copied into a text
field.
32 VX7100
Format Text Allows you to
change the look of the text.
Alignment/ Font Size/ Font Style/
Text Color/ Background
Priority Level Gives priority to
the message.
High/ Normal
Callback # Inserts a pre-
programmed callback number
with your message.
On/ Off/ Edit
Save Quick Text Allows you to
save the message as a Quick
Text.
Cancel Message Cancels
message editing and goes to the
previous menu.
3. Complete and then send the
message.
Using Contacts to Send a Message
You can designate an entry saved
in your Contacts as the address
instead of manually entering the
destination.
1. Press the Left Soft Key
[Message].
2. Press New Message.
3. Press TXT Message.
4. Press the Right Soft Key
[Add].
5. Use the Directional Key to
highlight From Contacts and
press .
6. Use the Directional Key to
highlight the Contact entry
containing the destination and
press to mark the contact.
7. Press the Left Soft Key
[Done].
NOTE
The Address feature allows multi-
sending of up to 10 total addresses.
8. Complete the message as
necessary.
VX7100 33
MESSAGING
1.2 Picture Message
The Basics of Sending a Picture
Message
1. Press the Left Soft Key
[Message].
2. Press New Message.
3. Press Picture Message.
4. Enter the cellular phone number
or email address of the recipient.
5. Press the Directional Key
downward.
6. Type your message in the text
field.
7. Use the Directional Key to
highlight Pictureand press the
Left Soft Key [My Pics]. Use
the Directional Key to
select the image you want to
send, then press .
8. Use the Directional Key to
highlight Sound, then press the
Left Soft Key [Sounds]. Use
the Directional Key to
highlight the audio file you want
to send then press .
9. Use the Directional Key to
highlight Name Card, then press
the Left Soft Key
[Contacts]. Use the Directional
Key to choose My Name
Card/ From Contacts.
10. Use the Directional Key to
highlight Subject and enter the
subject.
11. Press [SEND].
A confirmation message is
displayed.
● Editing the To: field
1. With the To field highlighted,
press the Right Soft Key
[Add].
2. Select the option(s) to customize.
From Contacts/ From Recent
Calls/ Groups/ To Online Album/
To Contacts
●Editing Text
1. With the Text field highlighted,
press the Right Soft Key
[Options].
2. Select the option(s) to customize.
Preview Displays the Picture
message as it would be seen by
the recipient.
34 VX7100
Save As Draft Saves the
message into the Drafts folder.
Insert Quick Text Allows you to
add Quick Text.
Copy Text Allows you to copy
the input text.
Paste Allows you to paste the
text you last copied into a text
field.
Add Slide Insert multiple
pictures into a picture message.
Priority Level Gives priority to
the message.
High/ Normal
Cancel Message Cancels
message editing and goes to
Messaging menu.
●Editing Picture
1. With the Picture field highlighted,
press the Right Soft Key
[Options].
2. Select the option(s) to customize.
Preview/ Save As Draft/ Add
Slide/ Priority Level/ Remove
Picture/ Cancel Message
●Editing Sound
1. With the Sound field highlighted,
press the Right Soft Key
[Options].
2. Select the option(s) to customize.
Preview/ Save As Draft/ Add
Slide/ Priority Level/ Remove
Sound/ Cancel Message
●Editing Name Card
1. With the Name Card field
highlighted, press the Right Soft
Key [Options].
2. Select the option(s) to customize.
Preview/ Save As Draft/ Add
Slide/ Priority Level/ Remove
Name Card/ Cancel Message
●Editing a Subject
1. With the Subject field
highlighted, press the Right Soft
Key [Options].
2. Select the option(s) to customize.
Preview/ Save As Draft/ Insert
Quick Text/ Add Slide/ Priority
Level/ Cancel Message
VX7100 35
MESSAGING
1.3 Voice Message
The Basics of Sending a Voice
Message
1. Press the Left Soft Key
[Message].
2. Press New Message.
3. Press Voice Message.
4. Press to start recording.
5. Record your voice message.
6. Press to end recording.
7. Enter the cellular phone number
or email address of the recipient.
8. Press the Directional Key
downward.
9. Type your message.
10. Use the Directional Key to
highlight Name Card, then press
the Left Soft Key
[Contacts]. Use the Directional
Key to choose My Name
Card/ From Contacts.
11. Use the Directional Key to
highlight Subject and enter the
subject.
12. Press [SEND].
After a connecting display,
message is transmitted.
2. Inbox
The phone alerts you in 3 ways
when you receive a new message:
●By displaying a notification
message on the screen.
●By sounding a sound or
vibration, if set.
●By displaying . (The icon will
blink when you get a high priority
message.)
Viewing Your Inbox
1. Press the Left Soft Key
[Message].
2. Press Inbox.
3. Options from here with a
message highlighted:
●Press [OPEN] to view the
message.
●Press the Left Soft Key
[Erase] to erase the
highlighted message.
●Press the Right Soft Key
[Options] to access the
options.
Reply Replies to the origination
address of the received message.
Reply With Copy Replies to the
origination address with a copy of
the original message attached.
36 VX7100
Forward Forwards a received
message to other destination
address(es).
Add To Contacts Stores the
callback number, email address,
and numbers from the address of
the received message into your
Contacts.
Extract Addresses Allows you to
extract addresses.
Sort By Sender/Time Allows you
to sort messages alphabetically
by sender's name or by time
received.
Manage Inbox Allows you to
manage (lock or erase) message
list.
Message Info Allows you to
check the received message
information.
Message Icon Reference
New/ Unread TXT
Messages
Opened/ Read TXT
Messages
Priority High
Locked
New/ Unread Multimedia
Message
Open/ Read Multimedia
Message
New/Unread Browser
Messages
Opened/Read Browser
Messages
New/Unread Notification
Messages
Open/Read Notification
Messages
* Multimedia Message indicates Picture/ Voice
Message.
VX7100 37
MESSAGING
3. Sent
Depending on the content and size
of your messages, you can save up
to 100 Sent messages. This menu
lists your Sent messages. Use it to
verify whether the transmission
was successful or not and view
message contents.
1. Press the Left Soft Key
[Message].
2. Press Sent.
3. Options from here with a
message highlighted:
●Press [OPEN] to view the
message.
●Press the Left Soft Key
[Erase] to erase highlighted
message.
●Press the Right Soft Key
[Options].
Forward Forwards a sent
message to other destination
address(es).
Send Allows you to retransmit
the selected message.
Add To Contacts Stores the
callback number, email address,
and numbers from the address of
the message into your Contacts.
Sort By Recipient/Time Allows
you to sort alphabetically by
recipient's name or by time sent.
Manage Sent Allows you to
manage (erase or lock) message
list.
Message Info Allows you to
check the sent message
information.
Message Icon Reference
Text/Picture/Voice
Messages sent
Message delivered
Text/Picture/Voice
Messages failed
Multiple Messages sent
Multiple Messages
delivered
Multiple Messages failed
Multiple Messages
incomplete
Priority High
Locked
38 VX7100
4. Drafts
Displays draft messages.
1. Press the Left Soft Key
[Message].
2. Press Drafts.
3. Options from here with a
message highlighted:
●Press [EDIT] to continue
editing the message.
●Press the Left Soft Key
[Erase].
●Press the Right Soft Key
[Options].
Send Sends the selected
message.
Add To Contacts Stores the
callback number, email address,
and numbers from the address
included in the message into
your Contacts.
Manage Drafts Allows you to
manage (erase or lock)
messages.
Message Icon Reference
Draft TXT
Draft Multimedia Message
5. Voicemail
Allows you to view the number of
new voice messages recorded in
the Voicemail box. Once you
exceed the storage limit, old
messages are overwritten. When
you have a new voice message,
your phone will alert you.
Checking Your Voicemail Box
1. Press the Left Soft Key
[Message].
2. Press Voicemail.
3. Options from here :
●Press the Left Soft Key
[Clear] to delete information, and
then press [Yes].
●Press or [CALL] to
listen to the message(s).
OR
1. Dial 86 (VM) from your
phone or dial your wireless
phone number from any touch-
tone phone.
2. When the recorded
announcement begins, press
to interrupt (if applicable).
3. When prompted, enter your
password, then .
VX7100 39
MESSAGING
6. Wireless Sync Email
1. Press the Left Soft Key
[Message].
2. Press Wireless Sync
Email.
7. Mobile IM
Allows you to send and receive an
Instant Message at any time.
1. Press the Left Soft Key
[Message].
2. Press Mobile IM.
8. Email
Allows you to send an email via
Mobile Web.
1. Press the Left Soft Key
[Message].
2. Press Email.
3. A Mobile Web Browser session
starts.
4. Highlight an email provider and
press .
5. Login or enter your email
address and password.
9. Chat
Allows you to chat with Internet
Messenger users.
1. Press the Left Soft Key
[Message].
2. Press Chat.
3. A Mobile Web Browser session
starts.
4. Highlight a Chat provider and
press .
NOTE
This feature may require a
subscription to a Chat service
provider.
Messaging Settings
Allows you to configure settings for
your messages.
1. Press the Left Soft Key
[Message].
2. Press the Left Soft Key
[Settings].
3.
Use the Directional Key to
highlight one of the settings and
press to select it.
40 VX7100
Message Settings Sub-Menu
Descriptions
1. Entry Mode (T9 Word/ Abc/ ABC/
123/ T9 Palabra)
Allows you to select the default
input mode including Word, Abc,
ABC, 123,T9 Palabra.
2. Auto Save Sent (On/ Off/ Prompt)
With this feature on, messages are
automatically saved in the Sent
folder when transmitted.
3. Auto Erase Inbox (On/ Off)
With this feature on, read
messages are automatically
deleted when you exceed the
storage limit.
4. Messaging Font Size
Allows you to set the message font
size. Choose Normal or Large.
5. TXT Auto View (On/Off)
Allows the phone to directly display
the content when receiving a
message.
6. TXT Auto Scroll (On/Off)
Allows the display to automatically
scroll while viewing messages.
7. Multimedia Auto Receive(On/Off)
Allows you to directly download the
content when receiving a Picture,
or Voice message.
8. Quick Text
Allows you to display, edit, and add
text phrases. These text strings
allow you to reduce manual text
input into messages.
9. Voicemail #
Allows you to manually enter the
access number for Voicemail
Service. This feature should be only
used when a VMS (Voicemail
Service) access number is not
provided from the network.
0. Callback #
Allows you to automatically send a
designated callback number when
you send a message.
*. Signature (None/ Custom)
Allows you make/edit a signature to
automatically send with your
messages.
VX7100 41
MESSAGING
Erasing Messages
Allows you to erase messages
stored in your Inbox, Sent, or Drafts
folders. You can also erase all
messages at the same time.
1. Press the Left Soft Key
[Message].
2. Press the Right Soft Key
[Options] then select one of the
following:
Erase Inbox/ Erase Sent/ Erase
Drafts/ Erase All
3. Press to erase the
messages selected.
4. Press to confirm the
deletion.
A confirmation message is
displayed.
42 VX7100
R
RE
EC
CE
EN
NT
T C
CA
AL
LL
LS
S
The Recent Calls Menu is a list of
the last phone numbers or Contact
entries for calls you placed,
accepted, or missed. It's continually
updated as new numbers are
added to the beginning of the list
and the oldest entries are removed
from the bottom of the list.
1. Missed
Allows you to view the list of
missed calls; up to 90 entries.
1. Press [MENU].
2. Press Recent Calls.
3. Press Missed.
4. Use the Directional Key to
highlight an entry, then
●Press to open the entry.
●Press to place a call to
the number.
●Press the Right Soft Key
[Options] to select:
Save To Contacts (Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
●Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Voice Message
2. Received
Allows you to view the list of
incoming calls; up to 90 entries.
1. Press [MENU].
2. Press Recent Calls.
3. Press Received.
4. Use the Directional Key to
highlight an entry, then
●Press to open the entry.
●Press to place a call to
the number.
●Press the Right Soft Key
[Options] to select:
Save To Contacts (Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
●Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Voice Message
RECENT CALLS
VX7100 43
RECENT CALLS
3. Dialed
Allows you to view the list of
outgoing calls; up to 90 entries.
1. Press [MENU].
2. Press Recent Calls.
3. Press Dialed.
4. Use the Directional Key to
highlight an entry, then
●Press to open the entry.
●Press to place a call to
the number.
●Press the Right Soft Key
[Options] to select:
Save to Contacts(Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
●Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Voice Message
4. All
Allows you to view the list of all
calls; up to 270 entries.
1. Press [MENU].
2. Press Recent Calls.
3. Press All.
4. Use the Directional Key to
highlight an entry, then
●Press to open the entry.
●Press to place a call to
the number.
●Press the Right Soft Key
[Options] to select:
Save to Contacts(Details)/
Erase/ Lock(Unlock)/ Erase
All/ View Timers
●Press the Left Soft Key
[Message] to select:
TXT Message/ Picture
Message/ Voice Message
SHORTCUT
To view a quick list of all your
recent calls, press
from standby mode.
44 VX7100
5. View Timers
Allows you to view the duration of
selected calls.
1. Press [MENU].
2. Press Recent Calls.
3. Press View Timers.
4. Use the Directional Key to
highlight a call list.
Last Call/ All Calls/ Received
Calls/ Dialed Calls/ Roaming
Calls/ Transmit Data/ Received
Data/ Total Data/ Last Reset/
Lifetime Calls/ Lifetime Data
5. Press the Left Soft Key
[Reset] to reset the highlighted
timer.
6. Reset all the recorded timers by
pressing the Right Soft Key
[Reset All].
NOTE
Lifetime Calls and Lifetime Data
cannot be reset.
VX7100 45
MY RINGTONES
M
MY
Y R
RI
IN
NG
GT
TO
ON
NE
ES
S
46 VX7100
M
ME
ED
DI
IA
A C
CE
EN
NT
TE
ER
R
MEDIA CENTER allows you to do
more than just talk on your phone.
MEDIA CENTER is a technology
and service that allows you to
download and use applications on
your phone. With MEDIA CENTER,
it’s quick and easy to personalize
your phone to your lifestyle and
tastes. Just download the
applications that appeal to you.
With a wide range of software
available, you can be assured that
you can find something useful,
practical, or entertaining.
Anything Unclear?
From the MEDIA CENTER menu,
press the Right Soft Key [Info]
to see your memory status, activity
log, help text, and MEDIA CENTER
status. Use the Help option to view
information from buying new
applications to expired applications.
1. Tunes & Tones
Personalize your phone with
ringtones. A wide variety of
choices are available, such as
current hits, pop, hip-hop, and
more.
Access and Options
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Tunes & Tones.
4. Select a submenu by pressing
the number that corresponds
with the submenu.
1.1 Get New Ringtones
Allows you to connect to MEDIA
CENTER and download various
ringtones.
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Tunes & Tones.
4. Press Get New Ringtones.
MEDIA CENTER
VX7100 47
MEDIA CENTER
1.2 My Ringtones
Allows you to select a desired
ringtone, or download a new
ringtone.
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Tunes & Tones.
4. Press My Ringtones.
5. Use the Directional Key to
highlight a ringtone and press
the Left Soft Key [Set As].
You can press [PLAY] to play
the ringtone.
●Ringtone
●Contact ID: Highlight and
select the Contact to be
identified by the ringtone you
selected.
●Alert Sounds: Press the
corresponding number key to set
the ringtone for one of the
following:
All Messages/ TXT Message/
Multimedia Message/ Voicemail
1.3 My Sounds
Allows you to record a new sound
or select a desired sound.
How to record a new sound
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Tunes & Tones.
4. Press My Sounds.
5. Press Record New and
press to start recording,
then press again to stop.
How to select a sound
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Tunes & Tones.
4. Press My Sounds.
5. Use the Directional Key to
scroll and highlight a preloaded
sound.
Options with a sound file
highlighted:
●Press the Left Soft Key
[Erase].
●Press [PLAY].
48 VX7100
●Press the Right Soft Key
[Options] to select:
Send/ To Online Album/
Rename/ Lock(Unlock)/ Erase
All/ File Info
2. Pictures
View, take, and trade digital
pictures right from your wireless
phone.
Access and Options
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Pictures.
4. Select a submenu.
2.1 Get New Pictures
Allows you to connect to MEDIA
CENTER and download a variety of
images for My Pictures.
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Pictures.
4. Press Get New Pictures.
5. Press Get New Applications.
2.2 My Pictures
Allows you to view and manage
photos stored in the phone.
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Pictures.
4. Press My Pictures.
5. Highlight a picture with the
Directional Key and press
the Right Soft Key [Options]
for options.
6. Select one of the following
options:
Send Picture Message/ To
Online Album
Set As Main Wallpaper/ Front
Wallpaper/ Picture ID
Take Picture Turns on the
camera function.
Get New Pictures Download
various pictures.
Manage My Pics Allows you to
mark multiple pictures to be
erased, moved or locked/
unlocked.
Rename Allows you to change
the file name.
VX7100 49
MEDIA CENTER
Lock (Unlock) Allows you to lock
or unlock. Locked files can't be
erased accidentally.
File Info Name/ Date/ Time/
Resolution/ Size
* Only appears when the picture is
stored on the phone.
Editing a Picture
Access My Pictures, then use the
Directional Key to highlight a
picture. Press [VIEW] then
press the Right Soft Key
[Options] to access additional Edit
options like:
Edit Allows you to zoom, rotate and
crop the photo.
2.3 Take Picture
Lets you to take
digital pictures.
1. Press
[MENU].
2. Press
MEDIA CENTER.
3. Press Pictures.
4. Press Take Picture.
5. Set the brightness by pressing
the Directional Key up and down
, zoom by pressing the
Directional Key left and right ,
and press the Right Soft Key
[Options] to change other
settings.
NOTE
Zooming is not available on the
highest resolution.
●Select the option(s) to customize.
RESOLUTION 640x480 / 320x240
/160x120
SELF TIMER Off/ 3 Seconds/
5 Seconds/ 10 Seconds
WHITE BALANCE Auto/ Sunny/
Cloudy/ Fluorescent/ Glow
SHUTTER SOUND Shutter/ No
Sound /Say “Cheese”/
Ready! 1 2 3
50 VX7100
COLOR EFFECTS Normal/
Negative/ Aqua/ Sepia/
Black&White
NIGHT MODE On/ Off
PHOTOMETRY Average/ Spot/
Spot Multiple
PREVIEW Actual view/ Full
screen
6. Take a picture by pressing
[TAKE].
7. Press the Left Soft Key
[Save]. The picture is stored in
My Pictures.
TIP
Taking pictures with the flip closed.
Press and hold the side camera key
on the right side of the phone. And
then press the side volume keys on
the left side of the phone.
2.4 Online Album
Use to access the Online Album
(PIX Place).
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Pictures.
4. Press Online Album.
5. Login your mobile number and
password, as applicable.
3. Games
Allows you to download games and
applications from the MEDIA
CENTER server. Choose the
software you want from the list
displayed on the screen.
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Games.
4. Press Get New
Applications.
VX7100 51
MEDIA CENTER
4. Mobile Web
Mobile Web feature allows you to
access news, sports, weather and
email from your Verizon Wireless
device. Access and selections
within this feature are dependent
upon your service provider. For
specific information on Mobile Web
through your phone, contact your
service provider.
SHORTCUT
Pressing the Directional Key is the shortcut
to accessing Mobile Web 2.0 by default.
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Mobile Web.
Ending a Browser Session
End a Browser session by pressing
.
Navigating Through the Browser
On-screen items appear in one of
the following ways:
●Numbered options
You can use your numeric keypad
or you can select the items by
moving the cursor and pressing
the appropriate Soft Keys.
●Links embedded in content
You can act on the options or the
links using the Soft Keys just
below the display screen.
●Text or numbers
You can select the items by
moving the cursor and pressing
the appropriate Soft Keys.
Scrolling
Use the Directional Key .
A cursor lets you know which item
is currently selected.
Fast Scrolling
Press and hold the Directional Key
to quickly move the cursor up
and down on the current screen.
Scrolling by Page
Press the Side Keys to move up and
down a page at a time.
52 VX7100
Home Page
Press Right Soft Key [Menu]
and select 1. VZW Home or press
and hold to go to the Home
Page.
View Browser Menu
Press Voice Commands key to
display the Browser menu.
Soft Keys
To navigate to different screens or
select special functions, use the
Soft Keys. The function associated
with the Soft Keys can change for
each page and depends on each
highlighted item.
Left Soft Key
Left Soft Key is used primarily
for options or selecting an item but
its function may change, depending
on the content displayed.
Right Soft Key
Right Soft Key is used primarily
for secondary options or a menu of
secondary options.
Entering Text, Numbers, or Symbols
When prompted to enter text, the
current text entry method appears
above the Right Soft Key as
Word, Abc, ABC, 123 or Symbols.
To change the input mode, press
the Right Soft Key . To create an
upper case character, press .
Deleting Text/Number Entered
When entering text or numbers,
press to clear the last
number, letter, or symbol. Press and
hold to clear the input field
completely.
Initiating a Phone Call From the
Browser
You can make a phone call from the
Browser if the site you are using
supports the feature (the phone
number may be highlighted and the
Left Soft Key appears as Call).
The browser connection is
terminated when you initiate the
call. After you end the call, your
phone returns to the screen from
which you initiated the call.
VX7100 53
MEDIA CENTER
5. Browse & Download
Everything you need to know while
you’re on the go.
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Browse &
Download.
4. Press Get New Applications
or select VZ Navigator using the
Directional Key then press .
VZ NavigatorSM
Now you can find the address of a
great restaurant or the nearest
ATM. Check movie times. Discover
the latest hot spots. And know
exactly how to get where you’re
going. VZ Navigator puts all the
advanced features of the latest GPS
devices and systems on your
wireless device — at a fraction of
the price.
NOTES ●
To use VZ Navigator, you must
turn location on. (See page 73)
●
Download, subscription and
airtime required for use; only in
National Enhanced Service
Coverage Area: accuracy and
completeness of information is
not guaranteed; information
about location of device will be
used to deliver service.
6. Extras
1. Press [MENU].
2. Press MEDIA CENTER.
3. Press Extras.
4. Press Get New
Applications.
54 VX7100
M
MY
YP
PI
IC
CT
TU
UR
RE
ES
S
MY PICTURES
VX7100 55
VZ NAVIGATOR
V
VZ
Z N
NA
AV
VI
IG
GA
AT
TO
OR
R
56 VX7100
B
BL
LU
UE
ET
TO
OO
OT
TH
H
BLUETOOTH
VX7100 57
SETTINGS & TOOLS
58 VX7100
S
SE
ET
TT
TI
IN
NG
GS
S &
& T
TO
OO
OL
LS
S
1. My Verizon
Check your subscription
information ranging from your
payment plan to your software
upgrade or other available service.
1. Press [MENU].
2. Press Settings & Tools.
3. Press My Verizon.
2. Tools
Your phone tools include Voice
Commands, Calculator, Ez Tip
Calculator, Calendar, Alarm Clock,
Stopwatch, World Clock, and
Notepad.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
2.1 Voice Commands
This feature provides you with the
following options equipped with
AVR (Advanced Voice Recognition)
technology. Each option has its
detailed information on the phone
and you can check it out by
pressing the Left Soft Key
[Info].
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Voice Commands.
Access and Options
1. Press the Voice Command Key
(on the left side of the phone).
The Voice Commands feature has
several settings which allow you to
customize how you want to use it.
Access Voice Commands, then
press the Right Soft Key
[Settings].
Digit Dial Readout On/ Off
Choice List Automatic/ Always Off
VX7100 59
Sensitivity Control the sensitivity as
Reject More/ Automatic/ Reject
Less.
Train Voice If the phone often asks
you to repeat voice command, train
the phone to recognize your voice
patterns.
Train Words/ Train Digits
Prompts Mode/ Audio Playback/
Timeout
For Mode, set Prompts/ Readout +
Alerts/ Readout/ Tones Only. For
Audio Playback, set Speakerphone
or Earpiece.
For Timeout, set 5seconds or
10 seconds.
Call Alert Ring Only/ Caller ID +
Ring/ Name Repeat
2.1.1 Call <Name or Number>
Say "Call" and then call someone
simply by saying the name or phone
number. Please speak clearly and
say the name or number exactly as
it is entered in your Contact List.
When you have more than one
contact number, you can state the
name and number type of the
contact (for example, 'Call John
Work').
2.1.2 Send Msg to <Name or
Number>
Say "Send Message" and the
command will prompt you for the
type of message. After choosing the
message type, you will be prompted
for the contact name, number or
group. It will automatically start a
message. If you say a full-sentence
command, such as 'Send Message
to Bob', it will automatically start a
text message without asking for the
message type. When using 'Send
Message' command, speak clearly
and say the name, number or group
exactly as it is entered in your
Contact List.
2.1.3 Go to <Menu>
The 'Go to' command allows you to
access a menu within the phone
(for example, 'Go to Calendar').
If no menu option is stated, a list of
options will be provided.
2.1.4 Check <Item>
The ‘Check’ command allows you to
check out a wide range of items
such as Phone Status, Voicemail,
Messages, Missed Calls, Time,
Signal Strength, Battery and
Volume.
SETTINGS & TOOLS
60 VX7100
2.1.5 Contacts <Name>
You can look up names in your
Contacts (for example, 'Contacts
John') as well as manage your
Contact List including creating,
erasing or modifying.
Read out/ Create New/ Erase/
Modify
2.1.6 My Verizon
The 'My Verizon' command
provides you with direct access to
your Verizon Wireless account
information.
2.1.7 Help
Provides a general guideline to
using Voice Commands.
2.2 Calculator
Allows you to perform simple
mathematical calculations. You can
enter numbers up to eight digits and
the sixth decimal place.
Calculations can be made with up
to 4 lines at one time.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Calculator.
5. Enter the numbers to get the
value you want. To cancel a
number, press the Left Soft Key
[Clear].
6. Use the Right Soft Key
[Operators] to add parenthesis or
power among numbers for
calculation.
7. Use the Directional Key to
enter operation between
numbers and press [ = ] for
the result.
NOTE
To insert a decimal, press . To
insert ±, press .
2.3 Ez Tip Calculator
Allows you to quickly and easily
calculate bill amounts using the bill
total, tip % and number of people as
variables.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Ez Tip Calculator.
VX7100 61
5. Enter the variable fields (Total
bill, Tip (%), Split) and the
corresponding calculation fields
(tip and total for each person)
appear automatically.
6. Press the Left Soft Key
[Reset] for another calculation.
2.4 Calendar
Allows you to keep your agenda
convenient and easy to access.
Simply store your appointments and
your phone will alert you with a
reminder you set.
SHORTCUT
Pressing the Directional Key
downward from standby
mode is a hot key to Calendar
by default.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Calendar.
5. Use the Directional Key to
highlight the scheduled day.
Left : Previous Day
Right : Next Day
Up : Previous Week
Down : Next Week
6. Press the Left Soft Key [Add].
7. Enter Subject, then scroll down
to set remaining settings.
8. Highlight a Calendar setting field,
then press the Left Soft Key
[Set]. For each Calendar event
you can set:
●Start Date & Time
●End Date & Time
●Repeat ●Until
●Alerts ●Tones
●Vibrate
9. Use the Directional Key to
highlight the setting you want,
then press .
10. Press [SAVE] when
Calendar information is
complete.
SETTINGS & TOOLS
62 VX7100
2.5 Alarm Clock
Allows you to set up to three
alarms. At the alarm time, Alarm 1
(or 2 or 3) will be displayed on the
LCD screen and the alarm will
sound.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Alarm Clock.
5. Use the Directional Key to
highlight an Alarm (1, 2, or 3),
then press .
6. Enter the alarm information
including:
●Turn On/Off ●Set Time
●Repeat ●Ringtone
7. Use the Directional Key to
highlight the information you
want to set, then press the Left
Soft Key [Set] to view your
setting choices.
8. Press [SAVE] after setting all
of the Alarm fields as necessary.
NOTE
You can also open the flip and choose
Snooze or Dismiss.
2.6 Stopwatch
Allows you to use your phone as a
typical stopwatch. Pressing will
start and stop Stopwatch time.
While measuring time, press the
Left Soft Key to lap. After time
has stopped, press the Right Soft
Key [Reset].
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Stopwatch.
2.7 World Clock
Allows you to determine the current
time in another time zone or country
by navigating with the Directional
Key to the right or left.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press World Clock.
5. Press the Right Soft Key
[Cities] for a list of available
cities.
VX7100 63
6. Select a city from the list, then
press .
The display shows the position of
the city on a global map.
7. Press again to zoom in on
the city and view its date and
time infomation.
NOTE
With the Left Soft Key
[Set DST]
,
set to daylight saving time.
2.8 Notepad
Allows you to add, read, edit, and
erase notes to yourself.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Notepad.
5. Press the Left Soft Key
[Add] to write a new note.
6. Press the Left Soft Key to
change the entry mode.
7. After filling in the note, press
to save it.
2.9 USB Mass Storage
1. Press [MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press USB Mass Storage .
5. Press the Left Soft Key
[Add] to write a new note.
6. Press the Left Soft Key to
change the entry mode.
7. After filling in the note, press
to save it.
3. Bluetooth®Menu
The VX7100 is compatible with
devices that support the Headset,
Handsfree, Phonebook Access and
Object Push for vCard & vCal.
You may create and store 20
pairings within the VX7100 and
connect to one device.
The approximate communication
range for Bluetooth®wireless
technology is up to 30 feet (10
meters).
Bluetooth®QD ID B014472
NOTE
Read the user guide of each
Bluetooth®accessory that you are
trying to pair with your phone because
the instructions may be different.
NOTE
Your phone is based on the Bluetooth®
specification, but it is not guaranteed
to work with all devices enabled with
Bluetooth®wireless technology.
Phone does not support ALL
Bluetooth®OBEX Profiles.
* For vehicle/accessory compatibility go to
www.verizonwireless.com/bluetoothchart.
SETTINGS & TOOLS
64 VX7100
TIPS ●
HEADSET: Supports use of a
compatible bluetooth®headset for
mono voice.
●
HANDSFREE: Supports Bluetooth®
headsets, and may also support other
installed compatible Bluetooth®
devices with speakerphone
capabilities, such as car kits or a
conference room device. For
Handsfree Car Kit Compatibility, refer
to
www.verizonwireless.com/bluetoothchart
on the Verizon Wireless website.
●
PHONEBOOK ACCESS: Allows
sharing of your name card,
phonebook entries, and call history
with a compatible Bluetooth®device.
●
OBJECT PUSH: Allows sending and
receiving of contact name cards and
calendar events.
3.1 Add New Device
Pairing is the process that allows
the handset to locate, establish,
and register 1-to-1 connection with
the target device.
3.1.1 For pairing with a new
Bluetooth®device
1. Follow the Bluetooth®accessory
instructions to set the device to
pairing mode.
2. Press [MENU].
3. Press Settings & Tools.
4. Press Bluetooth Menu.
5. Press Add New Device.
Set the desired device to pairing.
6. If Bluetooth®power is set to off,
you will be prompted to turn
power on. Highlight Yes and
press .
7. The device will appear in Add
New Device menu once it has
been located. Highlight the
device and press .
8. The handset will prompt you for
the passcode. Consult the
Bluetooth®accessory
instructions for the appropriate
passcode (typically “0000” - 4
zeroes). Enter the passcode and
press . When Auto Pair
Handsfree is set to On, the
device will try to autopair for
headset.
9. When pairing with the Computer,
PC or PDA is successful,
highlight either Always Ask or
Always Connect and press
to connect with the device.
10. Once connected, you will see
the device listed in the
Bluetooth®Menu and
Bluetooth®indicator will change
to the will show up on your
screen when connected to the
VX7100 65
Bluetooth®device. You can also
check out the connection with a
blue icon on the list.
3.1.2 Icon Reference in Adding
New Device
When the Bluetooth®wireless
connection is built and paired
devices are found, the following
icons are displayed.
●Icon References When a
Bluetooth®Wireless Connection
is Searched (neither connected
nor paired).
● Icon References When
Successfully Connected
Turn On
Allows you to set the phone's
Bluetooth®power On/Off.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Bluetooth Menu.
4. Press the Left Soft Key
[Turn On].
NOTE
By default, your device’s Bluetooth®
functionality is turned off.
When an audio device is
found by your VX7100 device
When a PC is found by your
VX7100 device
When a PDA is found by your
VX7100 device
When another phone device
is found by your VX7100
device
When a printer is found by
your VX7100 device
When other undefined
devices are found by your
VX7100 device
When a carkit device is found
by your VX7100 device
When an only mono headset
is connected with your
VX7100 device
SETTINGS & TOOLS
66 VX7100
My Device Info
Allows you to edit the name of the
Bluetooth®device when Add New
Device menu is highlighted.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Bluetooth Menu.
4. Press the Right Soft Key
[Options].
5. Press My Device Info.
6. Press to clear the existing
name.
7. Use the Alphanumeric Keypad to
enter a new custom name.
8. Press to save and exit.
Discovery Mode
Allows you to set whether your
device is able to be searched by
other Bluetooth devices in the area.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Bluetooth Menu.
4. Press the Right Soft Key
[Options].
5. Press Discovery Mode.
6. Use the Directional Key to
highlight a setting, then press .
On / Off
NOTE
If you choose On for Discovery Mode,
your device is able to be searched by
other in-range Bluetooth®devices.
VX7100 67
Supported Profiles
Allows you to see profiles that your
VX7100 phone can support.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Bluetooth Menu.
4. Press the Right Soft Key
[Options].
5. Press Supported Profiles.
Auto Pair Handsfree
Allows Bluetooth pairing with an
audio device to be tried
automatically with a default PIN
code- 0000.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Bluetooth Menu.
4. Press the Right Soft Key
[Options].
5. Press Auto Pair Handsfree.
On / Off
The following options are available
in the paired device.
For headset devices:
1. Remove Device: You can remove
the device from the pairing list.
2. Rename Device: You can rename
the paired device.
3. Incoming Security: Allows you to
set permission before
connecting an incoming device.
4. Service Discovery: Allows you to
search for the services that the
selected device supports.
5. Device Info: Shows the device
information.
NOTE
When the device is connected to
SETTINGS & TOOLS
68 VX7100
another handset the following extra
options where found:
Send Name Card/ Get Name Card/
Exchange Name Card/ Send
Calendar Event
NOTES
In the pairing list, you can disconnect the
connected device with the Left Soft Key
[Turn Off]
. Reversely, you can turn it
on by pressing the Left Soft Key
[Turn
On]
again.
When an audio device is connected, then
you select another device and press ,
both devices are connected.
When connected with Phone or PC
supporting OPP, the following menus are
possible:
●
Send name card: Allows my contact data
to send other device up to 1000 Contacts.
●
Get name card: Allows you to pull name
card of other device.
●
Exchange name card: Allows you to
exchange my name card with other
device. Send Calendar Event: Allows you
to send up to 300 Calendar events to
other device.
4. Sounds Settings
Provides options to customize the
phone’s sounds.
4.1 Easy Set-up
Allows you to set volume settings.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Easy Set-up.
4.2 Master Volume
Allows you to set volume settings.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Master Volume.
5. Adjust the volume with the
Directional Key then press
to save the setting.
4.3 Call Sounds
Allows you to set how the phone
alerts you for types of incoming
calls.
1. Press [MENU].
2. Press Settings & Tools.
VX7100 69
3. Press Sounds Settings.
4. Press Call Sounds.
4.3.1 Call Ringtone
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Call Sounds.
5. Press Call Ringtone.
6. Use the Directional Key
to highlight a ringtone then
press to save the sound.
TIP
To hear a ringtone before you set it,
press the Left Soft Key
[[PPllaayy]].
4.3.2 Call Vibrate
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Call Sounds.
5. Press Call Vibrate.
6. Use the Directional Key
to highlight a setting, then
press .
On/ Off
4.4 Alert Sounds
Allows you to select the alert type
for a new message.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Alert Sounds.
5. Select TXT Message/
Multimedia Message/
Voicemail/Emergency Tone
6. The Alert Sounds menu has
these options:
Tone/ Vibrate/ Reminder
The exception for this is the
Emergency Tone menu. This
menu has these options:
Alert/ Vibrate/ Off
SETTINGS & TOOLS
70 VX7100
4.5 Keypad Volume
Allows you to set the keypad
volume.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Keypad Volume.
5. Adjust the volume with the
Directional Key then press
to save the setting.
4.6 Digit Dial Readout
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Digit Dial Readout.
4.7 Service Alerts
Allows you to set any of the four
Alert options to either On or Off.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Service Alerts.
5. Select an alert option.
ERI Alerts you to the status of
cellular service.
ERI: Enhanced Roaming
Indicator
Minute Beep Alerts you 10
seconds before the end of every
minute during a call.
Call Connect Alerts you when
the call is connected.
Charge Complete Alerts you
when the battery is completely
charged.
6. Use the Directional Key to
highlight a setting, then press .
On/ Off
4.8 Power On/Off
Allows you to set the phone to
sound a tone when the phone is
powered on/off.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Power On/Off.
5. Select Power On/ Power Off.
6. Use the Directional Key to
highlight a setting, then press .
On/ Off
4.9 Voice Clarity
Allows you to set the phone to
automatically adapt to noisy
environments by adjusting the
listening level and improving
speech intelligibility.
NOTE
The Voice Clarity feature is
automatically disabled when you use
the speakerphone or the hands-free
devices.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Sounds Settings.
4. Press Voice Clarity.
5. Use the Directional Key to
scroll to a setting, then press .
On/ Off
5. Display Settings
Provides options to customize the
phone’s display screen.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
5.1 Easy Set-up
Allows you to set volume settings.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Easy Set-up.
5.2 Banner
Allows you to enter a string of up to
23 characters which displays on the
LCD screen.
1. Press [MENU].
2. Use the Directional Key to
scroll to SETTINGS & TOOLS,
then perss .
3. Press Display Settings.
4. Press Banner.
VX7100 71
SETTINGS & TOOLS
5.2.1 Personal Banner
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Banner.
5. Press Personal Banner.
6. Enter your own banner text.
NOTE
Press the Directional Key to
change the color of the text. Use the
to select the color you want.
Black/ White/ Yellow/ Orange/ Red/
Brown/ Blue/ Green/ Sky Blue
7. Press .
5.2.2 ERI Banner
If you use ERI Service, ERI Text is
shown on the sub banner.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Banner.
5. Press ERI Banner.
6. Use the Directional Key
to highlight a setting, then
press .
On/ Off
5.3 Backlight
Allows you to set the duration for
illuminating the backlight. Display
and Keypad are set separately.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Backlight.
5. Highlight a Backlight submenu
and press .
Display/ Keypad
1. Display
Main Backlight: 7 Seconds/
15 Seconds/ 30 Seconds/
Always On/ Always Off
Front Backlight: 7 Seconds/
15 Seconds/ 30 Seconds
2. Keypad: 7 Seconds/ 15
Seconds/ 30 Seconds/
Always On/ Always Off
72 VX7100
5.4 Wallpaper
Allows you to choose the kind of
background to be displayed on the
phone's LCD in standby mode.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Wallpaper.
5. Highlight a Wallpaper submenu
and press .
Main Wallpaper/ Front
Wallpaper
1. Main Wallpaper
My Pictures/ Fun Animations
2. Front Wallpaper
Highlight the desired picture
and press to select.
6. Zoom in or out is available by
Soft Keys and press to set.
5.5 Display Themes
Allows you to choose the color of
the background screen.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Display Themes.
5. Use the Directional Key to
highlight a setting, then press .
Classic/Urban/Black
NOTE
Press the Left Soft Key
[Preview] to preview the selected
display theme.
5.6 Main Menu Settings
Allows you to choose how the Main
Menu displays for menu selection.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Main Menu
Settings.
VX7100 73
SETTINGS & TOOLS
5. Use the Directional Key to
highlight a setting, then press .
Tab/ List/ Grid
NOTE
This User Guide gives navigation
instructions according to the default
"List" Main Menu Layout in the
Display Settings menu. If other menus
are set, navigating the phone's menus
may be different.
NOTE
Press the Left Soft Key
[Preview] to preview the selected
menu setting.
5.7 Font Size
Allows you to set the Dial Digits font
size, Menu & Lists font size, and
Message font size. This setting is
helpful for those who need the text
to display a little bit larger.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Font Size.
5. Use the Directional Key to
select Dial Digits/
Menu & Lists/ Message.
6. Press the Left Soft Key [Set].
7. Use the Directional Key to
highlight a setting, then
press
Dial Digits: Normal/Large
Menu & Lists: Normal/ Large
Message: Normal/ Large
5.8 Menu Fonts
Allows you to set the font type.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Menu Fonts.
5. Use the Directional Key to
scroll to a setting, then press .
VZW Font/ LG Edge/ LG Script
NOTE
The selected font can be previewed
at the bottom left side of the LCD
74 VX7100
5.9 Clock Format
Allows you to choose the kind of
clock to be displayed on the front
and main LCD screens.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Display Settings.
4. Press Clock Format.
5. Highlight a Clock Format
submenu and press .
Main Clock/ Front Clock
1. Main Clock
Normal/ Analog/ Digital 12/
Large Digital 12/ Digital 24/
Large Digital 24/ Dual / Off
2. Front Clock
Digital 12/ Large Digital 12/ Off
6. Use the Directional Key to
highlight a setting, then press .
NOTE
Press the Left Soft Key
[Preview] to preview the selected clock
format.
6. Phone Settings
The Phone Settings Menu allows
you to designate specific settings to
customize how you use your phone.
6.1 Airplane Mode
Turning on Airplane Mode will
disable all wireless
communications.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Airplane Mode.
5. Use the Directional Key to
highlight a setting, then press .
On/ Off
VX7100 75
SETTINGS & TOOLS
6.2 Set Shortcuts
Allows you to set shortcuts to
phone menus using the down, up,
left and right Directional Key.
6.2.1 Set My Shortcuts
To access these shortcuts open the
flip, then press the Directional Key
to the right from standby mode (by
default) to display your four
shortcuts.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Set Shortcuts.
5. Press Set My Shortcuts.
6. Use the Directional Key to
highlight a shortcut key you want
to set.
Shortcut 1/ Shortcut 2/ Shortcut
3/ Shortcut 4
7. Press to display the
available shortcuts. Use the
Directional Key to select
one, then press .
6.2.2 Set Directional Keys
To access these shortcuts open the
flip, then press the Directional Key
to access the option that you
configured for that specific
directional key.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Set Shortcuts.
5. Press Set Directional Keys.
6. Use the Directional Key to
highlight a shortcut key you want
to set.
Up Directional Key/ Left
Directional Key/ Down
Directional Key
7. Press to display the
available shortcuts. Use the
Directional Key to select
one, then press .
76 VX7100
6.3 Voice Commands
Using the Internal Keypad
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Voice Commands.
Prompts Mode/ Audio
Playback/ Timeout
For Mode, set Prompts/ Readout
+Alerts/ Readout/ Tones Only.
For Audio Playback, set
Speakerphone/ Earpiece. For
Timeout, set 5 seconds or 10
seconds.
Call Alert Ring Only/ Caller ID +
Ring/ Name Repeat
6.4 Language
Allows you to set the bilingual
(English or Spanish) feature
according to your preference.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Language.
5. Use the Directional Key to
highlight a setting, then press .
English/ Español
6.5 Location
Allows you to set GPS (Global
Positioning System: Satellite
assisted location information
system) mode.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Location.
5. Use the Directional Key to
highlight a setting, then press .
Location On/ E911 Only
VX7100 77
SETTINGS & TOOLS
NOTES ●
GPS satellite signals are not
always received by the phone,
especially under bad atmospheric
and environmental conditions,
indoors, etc.
●
When a Location Setting
Restriction is activated in the
Security Menu, the lock code is
required when you enter location
menu. The lock code is the same 4
digits you use as your device lock
code; initially the last 4 digits of
your phone number.
●
When in Airplane Mode, services
supporting Location On
functionality (such as Chaperone)
will be suspended.
6.6 Current Country
The Current Country menu allow to
select your current location.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Current Country.
5. Use the Directional Key to
highlight a setting, then press .
NOTE
To assure that your phone works
properly while you travel, please verify
the country of your current location, so
the correct Country Code can be
applied.
6.7 Security
The Security menu allows you to
secure the phone electronically.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Security.
5. Enter the four-digit lock code.
The lock code is the last 4 digits
of your mobile phone number if it
is set.
The lock code is the last 4 digits
of your MEID if your mobile
phone number is not set.
6.7.1 Edit Codes
Allows you to enter a new four-
digit lock code.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Security.
5. Enter the four-digit lock code.
6. Press Edit Codes.
7. Select Phone Only or Calls &
Services.
8. Enter your new four-digit lock
78 VX7100
code.
9. For confirmation, it will ask
you to enter the new lock
code again.
6.7.2 Restrictions
Allows you to set separate
restrictions for Location Setting,
Calls and Messages.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Security.
5. Enter the four-digit lock code.
6. Press Restrictions.
7. Enter the four-digit PIN code.
8. Select a Restrictions menu
then press .
Location Setting/ Calls/
Messages
9. Use the Directional Key
to highlight the restriction
then press .
Location Setting Lock Setting/
Unlock Setting
Calls: Incoming Calls Allow
All / Contacts Only / Block All
Calls: Outgoing Calls Allow All
/ Contacts Only / Block All
Messages: Incoming
Messages Allow All / Block
All
Messages: Outgoing
Messages Allow All / Block
All
6.7.3 Phone Lock
Keeps your phone from
unauthorized use. Once the
phone is locked, it's in restricted
mode until the lock code is
entered. You can still receive
phone calls and make
emergency calls. You can modify
the lock code using Edit Codes
submenu within the Security
menu.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Security.
VX7100 79
SETTINGS & TOOLS
5. Enter the four-digit lock code.
6. Press
Phone Lock.
7. Highlight an option then press
.
Unlocked The phone is never
locked (Lock mode can still
be used).
On Power Up The phone is
locked when it is turned on.
6.7.4 Lock Phone Now
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Security.
5. Enter the four-digit lock code.
6. Press Lock Phone Now.
6.7.5 Reset Default
Allows you to reset your phone
to the factory default settings.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Security.
5. Enter the four-digit lock code.
6. Press Reset Default.
7. Press after reading the
warning message.
8. Select
Revert by pressing .
A confirmation message is
displayed briefly before the
phone resets itself.
6.7.6 Restore Phone
Allows you to erase all user data
and Contact information you've
entered in the phone's memory
so it's as if it just left the factory.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press Security.
5. Enter the four-digit lock code.
6. Press Restore Phone.
7. Press after reading the
warning message.
8. Enter the four-digit lock code.
80 VX7100
6.8 System Select
Allows you to set up the phone
management environment. Leave
this setting as the default unless
you want to alter system selection
as instructed by your service
provider.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press System Select.
5. Use the Directional Key to
highlight a setting, then press .
Home Only/ Automatic
6.9 NAM Select
Allows you to select the phone’s
NAM (Number Assignment
Module) if the phone is registered
with multiple service providers.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press NAM Select.
5. Use the Directional Key to
highlight a setting, then press .
NAM1/ NAM2
6.0 CDG2
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Settings.
4. Press CDG2.
7. Call Settings
The Call Settings Menu allows you
to designate how the phone
handles both incoming and
outgoing calls.
7.1 Answer Options
Allows you to determine how the
phone will answer an incoming call.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press Answer Options.
5. Use the Directional Key to
to mark the setting(s) you want to
use, then press .
Flip Open/ Any Key/ Auto with
Handsfree
VX7100 81
SETTINGS & TOOLS
6. Press the Left Soft Key [Done]
when you have marked the
setting(s) you want.
NOTE
Auto with Handsfree is available
when any external device is
connected to your phone or
speaker is set to on.
When the following settings are set,
Ringer is not activated.
●When Sounds Off / Alarm Only is
set or individual Contact Ringer
ID is set to No Ring/ Silence.
●When Ringer is set to Sounds Off
with side key or "Quiet".
7.2 Auto Retry
Allows you to set the length of time
the phone waits before
automatically redialing a number
when the attempted call fails.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press Auto Retry.
5. Use the Directional Key to
highlight a setting, then press .
Off/ Every 10 Seconds/ Every 30
Seconds/ Every 60 Seconds
7.3 TTY Mode
Allows you to attach a TTY device
enabling you to communicate with
parties also using a TTY device. A
phone with TTY support is able to
translate typed characters to voice.
Voice can also be translated into
characters and then displayed on
the TTY.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press TTY Mode.
An explanation message is
displayed.
5. Press to continue.
6. Use the Directional Key to
highlight a setting, then press .
TTY Full/ TTY + Talk/ TTY + Hear/
TTY Off
82 VX7100
TTY Full: Users who cannot talk or
hear send and receive a text
message through TTY equipment.
TTY + Talk: Users who can talk but
cannot hear receive a text message
and send voice through TTY
equipment.
TTY + Hear: Users who can hear
but cannot talk send a text
message and receive voice through
TTY equipment.
TTY Off: Users send and receive
without TTY equipment.
Connecting TTY Equipment and a
Terminal
1. Connect a TTY cable to TTY
connection on the terminal (TTY
connection location is the same
as a headset jack).
2. Enter the phone menu and set
the desired TTY mode.
3. After setting a TTY mode, check
the LCD screen of the phone for
the TTY icon.
4. Connect the TTY equipment to
the power source and turn it on.
5. Make a phone connection to the
desired number.
6. When connection is made, use
the TTY equipment to type in and
send a text message or send
voice.
VX7100 83
Menu User Feature
Transmission/
Receiving Mode
When making
communications with a
normal terminal
TTY Full
For hearing-/
verbally-
impaired
text message transmission,
text message receiving
Operator
required
TTY +
Talk
For hearing-
impaired able to talk voice transmission, text
message receiving
Operator
required
TTY +
Hear
For verbally-
impaired audible text message transmission,
voice receiving
Operator
required
TTY Off
voice transmission, voice
receiving
TTY Mode (Tele Type writer)
SETTINGS & TOOLS
7. The voice or text message from
the receiver end displays on the
TTY equipment display.
7.4 One Touch Dial
Allows you to initiate a speed dial
call by pressing and holding the
speed dial digit. If set to Off, Speed
Dial numbers designated in your
Contacts will not function.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press One Touch Dial.
5. Use the Directional Key to
highlight a setting, then press .
On/ Off
7.5 Voice Privacy
Allows you to set the voice privacy
feature for CDMA calls. CDMA
offers inherent voice privacy. Check
with your service provider for
availability.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press Voice Privacy.
5. Use the Directional Key to
highlight a setting, then press .
On/ Off
7.6 DTMF Tones
Allows you to set the DTMF tone
length.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press DTMF Tones.
5. Use the Directional Key to
highlight a setting, then press .
Short/ Long
7.7 Assisted Dialing
Allows you to allows easy dialing of
international calls while roaming in
another country. If Set to On,
Assisted Dialing is displayed in
calling screen.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press Assisted Dialing.
84 VX7100
5. Use the Directional Key to
highlight a setting, then press .
On/ Off
6. Highlight the Reference Country
and press Left Soft Key Set
to select country.
7. Use the Directional Key to
scroll to the desired country.
8. Press Left Soft Key Details
to edit and save the country
code, IDD Prefix(International
Direct Dial), NDD Prefix(National
Direct Dial), Area/City Code and
Length(Length of Phone
Number), then press to set.
NOTE
Ex.> A device in a China is trying to
reach a U.S. number, 201-555-5555
(Reference Country is U.S.A.)
replace '+' code with IDD prefix for
China.
User Enters: +1-201-555-5555 ,
Assisted Dialing : 00-1-201-555-5555
8. Memory
Allows you to check your VX7100
internal phone memory.
Shows the memory information
saved in your phone.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Memory.
4. Use the Directional Key to
select file storage type in the
VX7100, then press to view
the memory used.
Memory Usage / My Pictures /
My Sounds
9. Phone Info
Allows you to view the information
specific to your phone and software.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Info.
VX7100 85
SETTINGS & TOOLS
9.1 My Number
Allows you to view your phone
number.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Info.
4. Press My Number.
9.2 SW/HW Version
Allows you to view the versions of
various applications such as SW,
PRL, ERI, Browser, Media Center,
AVR, MMS, Bluetooth®, OTADM
Version, MSUI, HW, MEID Version,
and Warranty Date Code.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Info.
4. Press SW/HW Version.
9.3 Icon Glossary
Allows you to view all the icons and
their meanings.
1. Press [MENU].
2. Press Settings & Tools.
3. Press Phone Info.
4. Press Icon Glossary.
9.4 Software Update
This feature gives your phone the
ability to upgrade to the latest
software and keeps your phone
operating with the latest features
without visiting a Verizon Wireless
Communications Store for the
upgrade. You can either be notified
automatically that there is an
updated version of software
available for your phone, or you can
manually check to see if there are
any updates available for you to
download.
86 VX7100
Automatic Update
Your phone will receive a
notification that there is an updated
version of software available to be
downloaded. You can press
when notified that a download is
available or it can happen
automatically. Once the download
is complete you may, depending on
the nature of the update, have three
options available: Accept the
update, Defer the update, or Reject
the update.
NOTE
During the update you cannot make
or receive phone calls, including 911
calls, or text messages.
Manual Update
1.
Press
[MENU].
2. Press Settings & Tools.
3. Press Phone Info.
4. Press
Software Update
.
The two options shown will be
Status and Check New.
Press Status to see the
status of a download or update
and see information on the last
successful update. If updates have
not yet been performed, status
information will be unavailable.
Press Check New to check
if any new software updates are
available to download. If a newer
software version is available, it will
automatically begin downloading
after 30 seconds or you can begin
the download immediately by
pressing . To stop the software
download press the Right Soft Key
[Quit].
VX7100 87
Safety
T
TI
IA
A S
Sa
af
fe
et
ty
y
I
In
nf
fo
or
rm
ma
at
ti
io
on
n
The following is the complete TIA
Safety Information for wireless
handheld phones.
Exposure to Radio Frequency
Signal
Your wireless handheld portable
phone is a low power radio
transmitter and receiver. When ON,
it receives and sends out Radio
Frequency (RF) signals.
In August, 1996, the Federal
Communications Commissions
(FCC) adopted RF exposure
guidelines with safety levels for
handheld wireless phones. Those
guidelines are consistent with the
safety standards previously set by
both U.S. and international
standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
* American National Standards
Institute; National Council on
Radiation Protection and
Measurements; International
Commission on Non-Ionizing
Radiation Protection
Those standards were based on
comprehensive and periodic
evaluations of the relevant
scientific literature. For example,
over 120 scientists, engineers, and
physicians from universities,
government health agencies, and
industry reviewed the available
body of research to develop the
ANSI Standard (C95.1).
The design of your phone
complies with the FCC
guidelines (and those
standards).
Antenna Care
Use only the supplied or an
approved replacement antenna.
Unauthorized antennas,
modifications, or attachments could
damage the phone and may violate
FCC regulations.
Phone Operation
NORMAL POSITION: Hold the
phone as you would any other
telephone with the antenna pointed
up and over your shoulder.
88 VX7100
Tips on Efficient Operation
For your phone to operate most
efficiently:
Don’t touch the antenna
unnecessarily when the phone is in
use. Contact with the antenna
affects call quality and may cause
the phone to operate at a higher
power level than otherwise needed.
Driving
Check the laws and regulations on
the use of wireless phones in the
areas where you drive and always
obey them. Also, if using your
phone while driving, please observe
the following:
●Give full attention to driving --
driving safely is your first
responsibility;
●Use hands-free operation, if
available;
●Pull off the road and park before
making or answering a call if
driving conditions or the law
require it.
Electronic Devices
Most modern electronic equipment
is shielded from RF signals.
However, certain electronic
equipment may not be shielded
against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers
Association recommends that a
minimum separation of six (6)
inches be maintained between a
handheld wireless phone and a
pacemaker to avoid potential
interference with the pacemaker.
These recommendations are
consistent with the independent
research by and recommendations
of Wireless Technology Research.
Persons with pacemakers:
●Should ALWAYS keep the phone
more than six (6) inches from
their pacemaker when the phone
is turned ON;
●Should not carry the phone in a
breast pocket;
●Should use the ear opposite the
pacemaker to minimize the
potential for interference;
●Should turn the phone OFF
immediately if there is any
reason to suspect that
interference is taking place.
VX7100 89
Safety
Hearing Aids
Some digital wireless phones may
interfere with some hearing aids. In
the event of such interference, you
may want to consult your service
provider (or call the customer
service line to discuss alternatives).
Other Medical Devices
If you use any other personal
medical device, consult the
manufacturer of your device to
determine if it is adequately
shielded from external RF energy.
Your physician may be able to
assist you in obtaining this
information.
Health Care Facilities
Turn your phone OFF in health care
facilities when any regulations
posted in these areas instruct you
to do so. Hospitals or health care
facilities may use equipment that
could be sensitive to external RF
energy.
Vehicles
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor
vehicles. Check with the
manufacturer or its representative
regarding your vehicle. You should
also consult the manufacturer of
any equipment that has been added
to your vehicle.
Posted Facilities
Turn your phone OFF in any facility
where posted notices so require.
Aircraft
FCC regulations prohibit using your
phone while in the air. Switch OFF
your phone before boarding an
aircraft.
Blasting Areas
To avoid interfering with blasting
operations, turn your phone OFF
when in a “blasting area” or in
areas posted: “Turn off two-way
radio”. Obey all signs and
instructions.
Potentially Explosive Atmosphere
Turn your phone OFF when in any
area with a potentially explosive
atmosphere and obey all signs and
instructions. Sparks in such areas
could cause an explosion or fire
resulting in bodily injury or even
death.
Areas with a potentially explosive
atmosphere are often, but not
90 VX7100
always marked clearly. Potential
areas may include: fueling areas
(such as gasoline stations); below
deck on boats; fuel or chemical
transfer or storage facilities;
vehicles using liquefied petroleum
gas (such as propane or butane);
areas where the air contains
chemicals or particles (such as
grain, dust, or metal powders); and
any other area where you would
normally be advised to turn off your
vehicle engine.
For Vehicles Equipped with an Air
Bag
An air bag inflates with great force.
DO NOT place objects, including
either installed or portable wireless
equipment, in the area over the air
bag or in the air bag deployment
area. If in-vehicle wireless
equipment is improperly installed
and the air bag inflates, serious
injury could result.
S
Sa
af
fe
et
ty
y I
In
nf
fo
or
rm
ma
at
ti
io
on
n
Please read and observe the
following information for safe and
proper use of your phone and to
prevent damage. Also, keep the
user guide in an accessible place at
all times after reading it.
Violation of the
instructions may
cause minor or serious damage to
the product.
●Do not disassemble or open
crush, bend or deform, puncture
or shred.
●Do not modify or remanufacture,
attempt to insert foreign objects
into the battery, immerse or
expose to water or other liquids,
expose to fire, explosion or other
hazard.
●Only use the battery for the
system for which it is specified.
●Only use the battery with a
charging system that has been
qualified with the system per
IEEE-Std-1725-2006. Use of an
unqualified battery or charger
may present a risk of fire,
explosion, leakage, or other
hazard.
Caution
VX7100 91
Safety
●Do not short circuit a battery or
allow metallic conductive
objects to contact battery
terminals.
●Replace the battery only with
another battery that has been
qualified with the system per this
standard, IEEE-Std-1725-2006.
Use of an unqualified battery
may present a risk of fire,
explosion, leakage or other
hazard.
●Promptly dispose of used
batteries in accordance with
local regulations.
●Battery usage by children should
be supervised.
●Avoid dropping the phone or
battery. If the phone or battery is
dropped, especially on a hard
surface, and the user suspects
damage, take it to a service
center for inspection.
●At least, one of the
Authentication methods may be
implemented. (e.g. H/W, S/W,
Mechanical, Hologram, etc.)
●Improper battery use may result
in a fire, explosion or other
hazard.
Charger and Adapter Safety
●The charger and adapter are
intended for indoor use only.
●Insert the battery pack charger
vertically into the wall power
socket.
●Only use the approved battery
charger. Otherwise, you may
cause serious damage to your
phone.
●Use the correct adapter for your
phone when using the battery
pack charger abroad.
Battery Information and Care
●Please dispose of your battery
properly or take it to your local
wireless carrier for recycling.
●The battery doesn’t need to be
empty before recharging.
●Use only LG-approved chargers
specific to your phone model
since they are designed to
maximize battery life.
●Do not disassemble or short-
circuit the battery.
●Keep the battery’s metal
contacts clean.
●Replace the battery when it no
longer provides acceptable
92 VX7100
performance. The battery can be
recharged several hundred times
before replacement.
●Recharge the battery after long
periods of non-use to maximize
battery life.
●Battery life will vary due to
usage patterns and
environmental conditions.
●Use of extended backlighting,
Browser, and data connectivity
kits affect battery life and talk/
standby times.
●The self-protection function of
the battery cuts the power of the
phone when its operation is in an
abnormal state. In this case,
remove the battery from the
phone, reinstall it, and turn the
phone on.
Explosion, Shock, and Fire Hazards
●Do not put your phone in a place
subject to excessive dust and
keep the minimum required
distance between the power
cord and heat sources.
●Unplug the power cord prior to
cleaning your phone, and clean
the power plug pin when it’s
dirty.
●When using the power plug,
ensure that it’s firmly connected.
If not, it may cause excessive
heat or fire.
●If you put your phone in a pocket
or bag without covering the
receptacle of the phone (power
plug pin), metallic articles (such
as a coin, paperclip or pen) may
short-circuit the phone. Always
cover the receptacle when not in
use.
●Don’t short-circuit the battery.
Metallic articles such as a coin,
paperclip or pen in your pocket
or bag may short-circuit the +
and – terminals of the battery
(metal strips on the battery) upon
moving. Short-circuit of the
terminal may damage the battery
and cause an explosion.
General Notice
●Using a damaged battery or
placing a battery in your mouth
may cause serious injury.
●Do not place items containing
magnetic components such as a
credit card, phone card, bank
book, or subway ticket near your
phone. The magnetism of the
phone may damage the data
stored in the magnetic strip.
VX7100 93
Safety
●Talking on your phone for a long
period of time may reduce call
quality due to heat generated
during use.
●When the phone is not used for
a long period time, store it in a
safe place with the power cord
unplugged.
●Using the phone in proximity to
receiving equipment (i.e., TV or
radio) may cause interference to
the phone.
●Do not use the phone if the
antenna is damaged. If a
damaged antenna contacts skin,
it may cause a slight burn.
Please contact an LG Authorized
Service Center to replace the
damaged antenna.
●Do not immerse your phone in
water. If this happens, turn it off
immediately and remove the
battery. If the phone does not
work, take it to an LG Authorized
Service Center.
●Do not paint your phone.
●The data saved in your phone
might be deleted due to careless
use, repair of the phone, or
upgrade of the software. Please
backup your important phone
numbers. (Ringtones, text
messages, voice messages,
pictures, and videos could also
be deleted.) The manufacturer is
not liable for damage due to the
loss of data.
●When you use the phone in
public places, set the ringtone to
vibration so you don't disturb
others.
●Do not turn your phone on or off
when putting it to your ear.
●Use accessories, such as
earphones and headsets, with
caution. Ensure that cables are
tucked away safely and do not
touch the antenna unnecessarily.
94 VX7100
C
Ca
au
ut
ti
io
on
n:
:
A
Av
vo
oi
id
d p
po
ot
te
en
nt
ti
ia
al
l
h
he
ea
ar
ri
in
ng
g l
lo
os
ss
s.
.
Prolonged exposure to loud sounds
(including music) is the most
common cause of preventable
hearing loss. Some scientific
research suggests that using
portable audio devices, such as
portable music players and cellular
telephones, at high volume settings
for long durations may lead to
permanent noise induced hearing
loss. This includes the use of
headphones (including headsets,
earbuds and Bluetooth®or other
wireless devices). Exposure to very
loud sound has also been
associated in some studies with
tinnitus (a ringing in the ear),
hypersensitivity to sound and
distorted hearing. Individual
susceptibility to noise-induced
hearing loss and other potential
hearing problems varies.
The amount of sound produced by
a portable audio device varies
depending on the nature of the
sound, the device, the device
settings and the headphones. You
should follow some commonsense
recommendations when using any
portable audio device:
●Set the volume in a quiet
environment and select the
lowest volume at which you can
hear adequately.
●When using headphones, turn
the volume down if you cannot
hear the people speaking near
you or if the person sitting next
to you can hear what you are
listening to.
●Do not turn the volume up to
block out noisy surroundings. If
you choose to listen to your
portable device in a noisy
environment, use noise-
cancelling headphones to block
out background environmental
noise.
●Limit the amount of time you
listen. As the volume increases,
less time is required before your
hearing could be affected.
●Avoid using headphones after
exposure to extremely loud
noises, such as rock concerts,
that might cause temporary
hearing loss. Temporary hearing
loss might cause unsafe volumes
to sound normal.
●Do not listen at any volume that
causes you discomfort. If you
experience ringing in your ears,
VX7100 95
Safety
hear muffled speech or
experience any temporary
hearing difficulty after listening
to your portable audio device,
discontinue use and consult your
doctor.
You can obtain additional
information on this subject from the
following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite
300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: www.audiology.org
National Institute on Deafness and
Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD USA 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet:
http://www.nidcd.nih.gov/health/he
aring
National Institute for Occupational
Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-
4674)
Internet:
http://www.cdc.gov/niosh/topics/no
ise/default.html
96 VX7100
F
FD
DA
A C
Co
on
ns
su
um
me
er
r
U
Up
pd
da
at
te
e
The U.S. Food and Drug
Administration’s Center
for Devices and
Radiological Health Consumer
Update on Mobile Phones:
1. Do wireless phones pose a
health hazard?
The available scientific evidence
does not show that any health
problems are associated with using
wireless phones. There is no proof,
however, that wireless phones are
absolutely safe. Wireless phones
emit low levels of Radio Frequency
(RF) energy in the microwave range
while being used. They also emit
very low levels of RF when in
standby mode. Whereas high levels
of RF can produce health effects
(by heating tissue), exposure to low
level RF that does not produce
heating effects causes no known
adverse health effects. Many
studies of low level RF exposures
have not found any biological
effects. Some studies have
suggested that some biological
effects may occur, but such
findings have not been confirmed
by additional research. In some
cases, other researchers have had
difficulty in reproducing those
studies, or in determining the
reasons for inconsistent results.
2. What is the FDA's role
concerning the safety of wireless
phones?
Under the law, the FDA does not
review the safety of radiation-
emitting consumer products such
as wireless phones before they can
be sold, as it does with new drugs
or medical devices. However, the
agency has authority to take action
if wireless phones are shown to
emit Radio Frequency (RF) energy
at a level that is hazardous to the
user. In such a case, the FDA could
require the manufacturers of
wireless phones to notify users of
the health hazard and to repair,
replace, or recall the phones so
that the hazard no longer exists.
Although the existing scientific data
does not justify FDA regulatory
actions, the FDA has urged the
wireless phone industry to take a
number of steps, including the
following:
●Support needed research into
possible biological effects of RF
of the type emitted by wireless
phones;
VX7100 97
Safety
●Design wireless phones in a way
that minimizes any RF exposure
to the user that is not necessary
for device function; and
●Cooperate in providing users of
wireless phones with the best
possible information on possible
effects of wireless phone use on
human health.
The FDA belongs to an interagency
working group of the federal
agencies that have responsibility
for different aspects of RF safety to
ensure coordinated efforts at the
federal level. The following
agencies belong to this working
group:
●National Institute for
Occupational Safety and Health
●Environmental Protection
Agency
●Occupational Safety and Health
Administration
●National Telecommunications
and Information Administration
The National Institutes of Health
participates in some interagency
working group activities, as well.
The FDA shares regulatory
responsibilities for wireless phones
with the Federal Communications
Commission (FCC). All phones that
are sold in the United States must
comply with FCC safety guidelines
that limit RF exposure. The FCC
relies on the FDA and other health
agencies for safety questions about
wireless phones.
The FCC also regulates the base
stations that the wireless phone
networks rely upon. While these
base stations operate at higher
power than do the wireless phones
themselves, the RF exposures that
people get from these base stations
are typically thousands of times
lower than those they can get from
wireless phones. Base stations are
thus not the subject of the safety
questions discussed in this
document.
3. What kinds of phones are the
subject of this update?
The term “wireless phone” refers
here to handheld wireless phones
with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones.
These types of wireless phones can
expose the user to measurable
Radio Frequency (RF) energy
because of the short distance
between the phone and the user’s
head.
These RF exposures are limited by
FCC safety guidelines that were
98 VX7100
developed with the advice of the
FDA and other federal health and
safety agencies. When the phone is
located at greater distances from
the user, the exposure to RF is
drastically lower because a
person's RF exposure decreases
rapidly with increasing distance
from the source. The so-called
“cordless phones,” which have a
base unit connected to the
telephone wiring in a house,
typically operate at far lower power
levels, and thus produce RF
exposures far below the FCC safety
limits.
4. What are the results of the
research done already?
The research done thus far has
produced conflicting results, and
many studies have suffered from
flaws in their research methods.
Animal experiments investigating
the effects of Radio Frequency (RF)
energy exposures characteristic of
wireless phones have yielded
conflicting results that often cannot
be repeated in other laboratories. A
few animal studies, however, have
suggested that low levels of RF
could accelerate the development
of cancer in laboratory animals.
However, many of the studies that
showed increased tumor
development used animals that had
been genetically engineered or
treated with cancer-causing
chemicals so as to be pre-disposed
to develop cancer in the absence of
RF exposure. Other studies exposed
the animals to RF for up to 22 hours
per day. These conditions are not
similar to the conditions under
which people use wireless phones,
so we do not know with certainty
what the results of such studies
mean for human health. Three large
epidemiology studies have been
published since December 2000.
Between them, the studies
investigated any possible
association between the use of
wireless phones and primary brain
cancer, glioma, meningioma, or
acoustic neuroma, tumors of the
brain or salivary gland, leukemia, or
other cancers. None of the studies
demonstrated the existence of any
harmful health effects from
wireless phone RF exposures.
However, none of the studies can
answer questions about long-term
exposures, since the average
period of phone use in these
studies was around three years.
VX7100 99
Safety
5. What research is needed to
decide whether RF exposure from
wireless phones poses a health
risk?
A combination of laboratory studies
and epidemiological studies of
people actually using wireless
phones would provide some of the
data that are needed. Lifetime
animal exposure studies could be
completed in a few years. However,
very large numbers of animals
would be needed to provide reliable
proof of a cancer promoting effect,
if one exists. Epidemiological
studies can provide data that is
directly applicable to human
populations, but ten or more years
follow-up may be needed to provide
answers about some health effects,
such as cancer. This is because the
interval between the time of
exposure to a cancer-causing
agent and the time tumors develop
— if they do — may be many, many
years. The interpretation of
epidemiological studies is
hampered by difficulties in
measuring actual RF exposure
during day-to-day use of wireless
phones. Many factors affect this
measurement, such as the angle at
which the phone is held, or which
model of phone is used.
6. What is the FDA doing to find out
more about the possible health
effects of wireless phone RF?
The FDA is working with the U.S.
National Toxicology Program and
with groups of investigators around
the world to ensure that high
priority animal studies are
conducted to address important
questions about the effects of
exposure to Radio Frequency (RF)
energy.
The FDA has been a leading
participant in the World Health
Organization International Electro
Magnetic Fields (EMF) Project
since its inception in 1996. An
influential result of this work has
been the development of a detailed
agenda of research needs that has
driven the establishment of new
research programs around the
world. The project has also helped
develop a series of public
information documents on EMF
issues.
The FDA and the Cellular
Telecommunications & Internet
Association (CTIA) have a formal
Cooperative Research And
Development Agreement (CRADA)
to do research on wireless phone
safety. The FDA provides the
scientific oversight, obtaining input
100 VX7100
from experts in government,
industry, and academic
organizations. CTIA-funded
research is conducted through
contracts with independent
investigators. The initial research
will include both laboratory studies
and studies of wireless phone
users. The CRADA will also include
a broad assessment of additional
research needs in the context of
the latest research developments
around the world.
7. How can I find out how much
Radio Frequency energy exposure I
can get by using my wireless
phone?
All phones sold in the United States
must comply with Federal
Communications Commission (FCC)
guidelines that limit Radio
Frequency (RF) energy exposures.
The FCC established these
guidelines in consultation with the
FDA and the other federal health
and safety agencies. The FCC limit
for RF exposure from wireless
phones is set at a Specific
Absorption Rate (SAR) of 1.6 watts
per kilogram (1.6 W/kg). The FCC
limit is consistent with the safety
standards developed by the
Institute of Electrical and Electronic
Engineering (IEEE) and the National
Council on Radiation Protection and
Measurement. The exposure limit
takes into consideration the body’s
ability to remove heat from the
tissues that absorb energy from the
wireless phone and is set well
below levels known to have effects.
Manufacturers of wireless phones
must report the RF exposure level
for each model of phone to the FCC.
The FCC website
(http://www.fcc.gov/oet/rfsafety)
gives directions for locating the FCC
identification number on your
phone so you can find your phone’s
RF exposure level in the online
listing.
8. What has the FDA done to
measure the Radio Frequency
energy coming from wireless
phones?
The Institute of Electrical and
Electronic Engineers (IEEE) is
developing a technical standard for
measuring the Radio Frequency
(RF) energy exposure from wireless
phones and other wireless
handsets with the participation and
leadership of FDA scientists and
engineers. The standard,
“Recommended Practice for
Determining the Spatial-Peak
VX7100 101
Safety
Specific Absorption Rate (SAR) in
the Human Body Due to Wireless
Communications Devices:
Experimental Techniques”, sets
forth the first consistent test
methodology for measuring the rate
at which RF is deposited in the
heads of wireless phone users. The
test method uses a tissue-
simulating model of the human
head. Standardized SAR test
methodology is expected to greatly
improve the consistency of
measurements made at different
laboratories on the same phone.
SAR is the measurement of the
amount of energy absorbed in
tissue, either by the whole body or
a small part of the body. It is
measured in watts/kg (or
milliwatts/g) of matter. This
measurement is used to determine
whether a wireless phone complies
with safety guidelines.
9. What steps can I take to reduce
my exposure to Radio Frequency
energy from my wireless phone?
If there is a risk from these
products — and at this point we do
not know that there is — it is
probably very small. But if you are
concerned about avoiding even
potential risks, you can take a few
simple steps to minimize your
exposure to Radio Frequency (RF)
energy. Since time is a key factor in
how much exposure a person
receives, reducing the amount of
time spent using a wireless phone
will reduce RF exposure. If you
must conduct extended
conversations by wireless phone
every day, you could place more
distance between your body and
the source of the RF, since the
exposure level drops off
dramatically with distance. For
example, you could use a headset
and carry the wireless phone away
from your body or use a wireless
phone connected to a remote
antenna. Again, the scientific data
does not demonstrate that wireless
phones are harmful. But if you are
concerned about the RF exposure
from these products, you can use
measures like those described
above to reduce your RF exposure
from wireless phone use.
10. What about children using
wireless phones?
The scientific evidence does not
show a danger to users of wireless
phones, including children and
teenagers. If you want to take steps
to lower exposure to Radio
102 VX7100
Frequency (RF) energy, the
measures described above would
apply to children and teenagers
using wireless phones. Reducing
the time of wireless phone use and
increasing the distance between
the user and the RF source will
reduce RF exposure.
Some groups sponsored by other
national governments have advised
that children be discouraged from
using wireless phones at all. For
example, the government in the
United Kingdom distributed leaflets
containing such a recommendation
in December 2000. They noted that
no evidence exists that using a
wireless phone causes brain
tumors or other ill effects. Their
recommendation to limit wireless
phone use by children was strictly
precautionary; it was not based on
scientific evidence that any health
hazard exists.
11. What about wireless phone
interference with medical
equipment?
Radio Frequency (RF) energy from
wireless phones can interact with
some electronic devices. For this
reason, the FDA helped develop a
detailed test method to measure
Electro Magnetic Interference
(EMI) of implanted cardiac
pacemakers and defibrillators from
wireless telephones. This test
method is now part of a standard
sponsored by the Association for
the Advancement of Medical
Instrumentation (AAMI). The final
draft, a joint effort by the FDA,
medical device manufacturers, and
many other groups, was completed
in late 2000. This standard will allow
manufacturers to ensure that
cardiac pacemakers and
defibrillators are safe from wireless
phone EMI.
The FDA has tested hearing aids for
interference from handheld
wireless phones and helped
develop a voluntary standard
sponsored by the Institute of
Electrical and Electronic Engineers
(IEEE). This standard specifies test
methods and performance
requirements for hearing aids and
wireless phones so that no
interference occurs when a person
uses a “compatible” phone and a
“compatible” hearing aid at the
same time. This standard was
approved by the IEEE in 2000.
The FDA continues to monitor the
use of wireless phones for possible
interactions with other medical
devices. Should harmful
VX7100 103
Safety
interference be found to occur, the
FDA will conduct testing to assess
the interference and work to
resolve the problem.
12. Where can I find additional
information?
For additional information, please
refer to the following resources:
FDA web page on wireless phones
(http://www.fda.gov/cellphones/)
Federal Communications
Commission (FCC) RF Safety
Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-
lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO)
International EMF Project
(http://www.who.int/emf)
National Radiological Protection
Board (UK)
(http://www.nrpb.org.uk/)
1
10
0 D
Dr
ri
iv
ve
er
r S
Sa
af
fe
et
ty
y T
Ti
ip
ps
s
Your wireless phone gives you the
powerful ability to communicate by
voice almost anywhere, anytime.
An important responsibility
accompanies the benefits of
wireless phones, one that every
user must uphold.
When operating a car, driving is
your first responsibility. When using
your wireless phone behind the
wheel of a car, practice good
common sense and remember the
following tips:
1. Get to know your wireless phone
and its features such as speed
dial and redial. Carefully read
your instruction manual and
learn to take advantage of
valuable features most phones
offer, including automatic redial
and memory. Also, work to
memorize the phone keypad so
you can use the speed dial
function without taking your
attention off the road.
2. When available, use a hands-
free device. A number of hands-
free wireless phone accessories
are readily available today.
Whether you choose an installed
mounted device for your
104 VX7100
wireless phone or a speaker
phone accessory, take
advantage of these devices if
available to you.
3. Make sure you place your
wireless phone within easy
reach and where you can reach
it without removing your eyes
from the road. If you get an
incoming call at an inconvenient
time, if possible, let your
voicemail answer it for you.
4. Suspend conversations during
hazardous driving conditions or
situations. Let the person you are
speaking with know you are
driving; if necessary, suspend
the call in heavy traffic or
hazardous weather conditions.
Rain, sleet, snow, and ice can be
hazardous, but so is heavy
traffic. As a driver, your first
responsibility is to pay attention
to the road.
5. Don’t take notes or look up
phone numbers while driving. If
you are reading an address book
or business card, or writing a
“to-do” list while driving a car,
you are not watching where you
are going. It is common sense.
Do not get caught in a
dangerous situation because you
are reading or writing and not
paying attention to the road or
nearby vehicles.
6. Dial sensibly and assess the
traffic; if possible, place calls
when you are not moving or
before pulling into traffic. Try to
plan your calls before you begin
your trip or attempt to coincide
your calls with times you may be
stopped at a stop sign, red light,
or otherwise stationary. But if
you need to dial while driving,
follow this simple tip -- dial only a
few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or
emotional conversations that
may be distracting. Stressful or
emotional conversations and
driving do not mix; they are
distracting and even dangerous
when you are behind the wheel
of a car. Make people you are
talking with aware you are
driving and if necessary,
suspend conversations which
have the potential to divert your
attention from the road.
8. Use your wireless phone to call
for help. Your wireless phone is
one of the greatest tools you can
own to protect yourself and your
VX7100 105
Safety
family in dangerous situations --
with your phone at your side,
help is only three numbers away.
Dial 911 or other local
emergency number in the case
of fire, traffic accident, road
hazard, or medical emergency.
Remember, it’s a free call on your
wireless phone!
9. Use your wireless phone to help
others in emergencies. Your
wireless phone provides you a
perfect opportunity to be a
“Good Samaritan” in your
community. If you see an auto
accident, crime in progress or
other serious emergency where
lives are in danger, call 911 or
other local emergency number,
as you would want others to do
for you.
10. Call roadside assistance or a
special wireless non-emergency
assistance number when
necessary. Certain situations you
encounter while driving may
require attention, but are not
urgent enough to merit a call for
emergency services. But you
can still use your wireless
phone to lend a hand. If you see
a broken-down vehicle posing
no serious hazard, a broken
traffic signal, a minor traffic
accident where no one appears
injured or a vehicle you know to
be stolen, call roadside
assistance or other special non-
emergency wireless number.
The above tips are meant as
general guidelines. Before deciding
to use your mobile device while
operating a vehicle, it is
recommended that you consult
your applicable jurisdiction’s local
laws or other regulations regarding
such use. Such laws or other
regulations may prohibit or
otherwise restrict the manner in
which a driver may use his or her
phone while operating a vehicle.
106 VX7100
C
Co
on
ns
su
um
me
er
r
I
In
nf
fo
or
rm
ma
at
ti
io
on
n o
on
n S
SA
AR
R
(Specific Absorption Rate)
This model phone meets the
government's requirements for
exposure to radio waves. Your
wireless phone is a radio
transmitter and receiver. It is
designed and manufactured not to
exceed the emission limits for
exposure to Radio Frequency (RF)
energy set by the Federal
Communications Commission of the
U.S. Government. These limits are
part of comprehensive guidelines
and establish permitted levels of RF
energy for the general population.
The guidelines are based on
standards that were developed by
independent scientific
organizations through periodic and
thorough evaluation of scientific
studies. The standards include a
substantial safety margin designed
to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless
mobile phones employs a unit of
measurement known as the
Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6
W/kg. Tests for SAR are conducted
using standard operating positions
specified by the FCC with the phone
transmitting at its highest certified
power level in all tested frequency
bands. Although SAR is determined
at the highest certified power level,
the actual SAR level of the phone
while operating can be well below
the maximum value. Because the
phone is designed to operate at
multiple power levels to use only
the power required to reach the
network, in general, the closer you
are to a wireless base station
antenna, the lower the power
output.
Before a phone model is available
for sale to the public, it must be
tested and certified to the FCC that
it does not exceed the limit
established by the government-
adopted requirement for safe
exposure. The tests are performed
in positions and locations (e.g., at
the ear and worn on the body) as
required by the FCC for each model.
The highest SAR value for this
model phone when tested for use at
the ear is 1.26 W/kg and when
worn on the body, as described in
this user guide, is 0.473 W/kg (body-
worn measurements differ among
phone models, depending upon
available accessories and FCC
VX7100 107
Safety
requirements). While there may be
differences between SAR levels of
various phones and at various
positions, they all meet the
government requirement for safe
exposure.
The FCC has granted an Equipment
Authorization for this model phone
with all reported SAR levels
evaluated as in compliance with the
FCC RF emission guidelines. SAR
information on this model phone is
on file with the FCC and can be
found under the Display Grant
section of
http://www.fcc.gov/oet/fccid after
searching on FCC ID BEJVX7100.
Additional information on Specific
Absorption Rates (SAR) can be
found on the Cellular
Telecommunications Industry
Association (CTIA) website at
http://www.ctia.org.
* In the United States and Canada,
the SAR limit for mobile phones
used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of
tissue. The standard incorporates a
substantial margin of safety to give
additional protection for the public
and to account for any variations in
measurements.
F
FC
CC
C H
He
ea
ar
ri
in
ng
g-
-A
Ai
id
d
C
Co
om
mp
pa
at
ti
ib
bi
il
li
it
ty
y (
(H
HA
AC
C)
)
R
Re
eg
gu
ul
la
at
ti
io
on
ns
s f
fo
or
r
W
Wi
ir
re
el
le
es
ss
s D
De
ev
vi
ic
ce
es
s
On July 10, 2003, the U.S. Federal
Communications Commission (FCC)
Report and Order in WT Docket 01-
309 modified the exception of
wireless phones under the Hearing
Aid Compatibility Act of 1988 (HAC
Act) to require digital wireless
phones be compatible with hearing-
aids. The intent of the HAC Act is to
ensure reasonable access to
telecommunications services for
persons with hearing disabilities.
While some wireless phones are
used near some hearing devices
(hearing aids and cochlear
implants), users may detect a
buzzing, humming, or whining noise.
Some hearing devices are more
immune than others to this
interference noise, and phones also
vary in the amount of interference
they generate.
The wireless telephone industry
has developed a rating system for
wireless phones, to assist hearing
device users to find phones that
may be compatible with their
hearing devices. Not all phones
108 VX7100
have been rated. Phones that are
rated have the rating on their box or
a label located on the box.
The ratings are not guarantees.
Results will vary depending on the
user's hearing device and hearing
loss. If your hearing device
happens to be vulnerable to
interference, you may not be able to
use a rated phone successfully.
Trying out the phone with your
hearing device is the best way to
evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4
meet FCC requirements and are
likely to generate less interference
to hearing devices than phones that
are not labeled. M4 is the
better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4
meet FCC requirements and are
likely to generate less interference
to hearing devices than phones that
are not labeled. T4 is the better/
higher of the two ratings.
Hearing devices may also be rated.
Your hearing device manufacturer
or hearing health professional may
help you find this rating. Higher
ratings mean that the hearing
device is relatively immune to
interference noise. The hearing aid
and wireless phone rating values
are then added together. A sum of 5
is considered acceptable for
normal use. A sum of 6 is
considered for best use.
In the above example, if a hearing
aid meets the M2 level rating and
the wireless phone meets the M3
level rating, the sum of the two
values equal M5. This should
provide the hearing aid user with
“normal usage” while using their
hearing aid with the particular
wireless phone. “Normal usage” in
this context is defined as a signal
quality that’s acceptable for normal
operation.
The M mark is intended to be
synonymous with the U mark. The T
mark is intended to be synonymous
with the UT mark. The M and T
marks are recommended by the
Alliance for Telecommunications
Industries Solutions (ATIS). The U
and UT marks are referenced in
Section 20.19 of the FCC Rules. The
HAC rating and measurement
procedure are described in the
VX7100 109
Safety
American National Standards
Institute (ANSI) C63.19 standard.
When you're talking over the cell
phone, it's recommended you'd turn
the BT (Bluetooth) mode off for
HAC.
110 VX7100
For information about hearing aids
and digital wireless phones
FCC Hearing Aid Compatibility and
Volume Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/
DigWireless.htm
HLAA (Hearing Loss Association of
America)
http://www.hearingloss.org/learn/cellph
onetech.asp
The Hearing Aid Compatibility FCC
Order
http://hraunfoss.fcc.gov/edocs_public/at
tachmatch/FCC-03-168A1.pdf
Accessories
VX7100 111
There are a variety of accessories available for your phone and three easy
ways to purchase them: shop online anytime at www.verizonwireless.com,
call us at 1866 VZ GOT IT (894 6848) or visit one of our Verizon Wireless
Communication Stores.
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY
COVERS:
LG offers you a limited warranty
that the enclosed subscriber unit
and its enclosed accessories will
be free from defects in material and
workmanship, according to the
following terms and conditions:
(1) The limited warranty for the
product extends for TWELVE (12)
MONTHS beginning on the date
of purchase of the product with
valid proof of purchase, or
absent valid proof of purchase,
FIFTEEN (15) MONTHS from date
of manufacture as determined by
the unit's manufacture date
code.
(2) The limited warranty extends
only to the original purchaser of
the product and is not assignable
or transferable to any
subsequent purchaser/end user.
(3) This warranty is good only to the
original purchaser of the product
during the warranty period as
long as it is in the U.S., including
Alaska, Hawaii, U.S. Territories
and Canada.
(4) The external housing and
cosmetic parts shall be free of
defects at the time of shipment
and, therefore, shall not be
covered under these limited
warranty terms.
(5) Upon request from LG, the
consumer must provide
information to reasonably prove
the date of purchase.
(6) The customer shall bear the cost
of shipping the product to the
Customer Service Department of
LG. LG shall bear the cost of
shipping the product back to the
consumer after the completion of
service under this limited
warranty.
2. WHAT THIS WARRANTY DOES
NOT COVER:
(1) Defects or damages resulting
from use of the product in other
than its normal and customary
manner.
(2) Defects or damages from
abnormal use, abnormal
conditions, improper storage,
exposure to moisture or
dampness, unauthorized
modifications, unauthorized
connections, unauthorized
repair, misuse, neglect, abuse,
accident, alteration, improper
installation, or other acts which
112 VX7100
are not the fault of LG, including
damage caused by shipping,
blown fuses, spills of food or
liquid.
(3) Breakage or damage to
antennas unless caused directly
by defects in material or
workmanship.
(4) That the Customer Service
Department at LG was not
notified by consumer of the
alleged defect or malfunction of
the product during the applicable
limited warranty period.
(5) Products which have had the
serial number removed or made
illegible.
(6) This limited warranty is in lieu of
all other warranties, express or
implied either in fact or by
operations of law, statutory or
otherwise, including, but not
limited to any implied warranty of
marketability or fitness for a
particular use.
(7) Damage resulting from use of
non LG approved accessories.
(8) All plastic surfaces and all other
externally exposed parts that are
scratched or damaged due to
normal customer use.
(9) Products operated outside
published maximum ratings.
(10) Products used or obtained in a
rental program.
(11) Consumables (such as fuses).
3. WHAT LG WILL DO:
LG will, at its sole option, either
repair, replace or refund the
purchase price of any unit that does
not conform to this limited warranty.
LG may choose at its option to use
functionally equivalent re-
conditioned, refurbished or new
units or parts or any units. In
addition, LG will not re-install or
back-up any data, applications or
software that you have added to
your phone. It is therefore
recommended that you back-up
any such data or information prior
to sending the unit to LG to avoid
the permanent loss of such
information.
4. STATE LAW RIGHTS:
No other express warranty is
applicable to this product. THE
DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE
IMPLIED WARRANTY OF
MARKETABILITY, IS LIMITED TO
VX7100 113
LIMITED WARRANTY STATEMENT
THE DURATION OF THE EXPRESS
WARRANTY HEREIN. LG SHALL
NOT BE LIABLE FOR THE LOSS OF
THE USE OF THE PRODUCT,
INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT
OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY
BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING
THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO
THIS PRODUCT.
Some states do not allow the
exclusive limitation of incidental or
consequential damages or
limitations on how long an implied
warranty lasts; so these limitations
or exclusions may not apply to you.
This warranty gives you specific
legal rights and you may also have
other rights which vary from state
to state.
5. HOW TO GET WARRANTY
SERVICE:
If you experience any problems
with either the Bluetooth headset or
the mobile handset, in each case as
may be covered by this limited
warranty, you need only return the
affected device. For example, if a
problem exists with the Bluetooth
headset, please DO NOT return
your mobile handset with the
headset. Likewise, if a problem
exists with the mobile handset,
please DO NOT return the
Bluetooth Headset with the
handset.
To obtain warranty service, please
call or fax to the following
telephone numbers from anywhere
in the continental United States:
Tel. 1-800-793-8896 or Fax. 1-800-
448-4026
Or visit http://us.lgservice.com.
Correspondence may also be
mailed to:
LG Electronics Service- Mobile
Handsets, P.O. Box 240007,
Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT
TO THE ABOVE ADDRESS. Please
call or write for the location of the
LG authorized service center
nearest you and for the procedures
for obtaining warranty claims.
114 VX7100
T
Te
er
rm
mi
in
no
ol
lo
og
gy
y
EZ Tip Calculator
Feature for easy bill calculation using the
total cost, tip, and number of people as
variables.
Advanced Voice Recognition
Feature that allows you to perform a
wide range of verbal commands by
training the phone to recognize your
individual speech patterns.
Bluetooth® wireless technology
Technology used to allow mobile phones,
computers, and other personal devices
to be easily coordinated and
interconnected using a short-range
wireless connection.
MEDIA CENTER
Feature that accesses the Internet to
provide the ability to access and even
download a wide variety of software,
information, and more right on your LG
Verizon wireless phone.
A
Ac
cr
ro
on
ny
ym
ms
s a
an
nd
d
A
Ab
bb
br
re
ev
vi
ia
at
ti
io
on
ns
s
DTMF
Dual-Tone Multi Frequency (or “touch-
tone”) is a method used to communicate
keys pressed on the phone. Pressing a
key generates two simultaneous tones,
one for the row and one for the column
to determine which key was pressed.
Glossary
VX7100 115
Glossary
ERI
Enhanced Roaming Indicator is a
feature to indicate whether a mobile
phone is on its home system, a partner
network, or a roaming network. Many
phones indicate home vs. roaming as an
icon, but ERI capable phones can clearly
indicate third “partner network” status.
GPS
Global Positioning System is a system of
satellites, computers, and receivers able
to determine the latitude and longitude of
a specific receiver on Earth. Position is
calculated using time and distance.
IS 2000
Type of digital signaling. It's the second
generation of CDMA digital cellular, an
extension of IS-95. Differences between
signaling types have to do with pilot
signal and links to provide more traffic
channels, and control protocols.
NAM
Number Assignment Module is how the
phone stores the phone number and its
electronic serial number.
SSL
Secure Sockets Layer Protocol used to
encrypt data sent over the air.
TTY
Teletypewriter. An electromechanical
typewriter that either transmits or
receives messages coded in electrical
signals. A phone with TTY support is able
to translate typed characters to voice or
translate voice into characters to display
on the TTY.
116 VX7100
10 Driver Safety Tips 104
A
Accessories 111
Add New Device 64
Airplane Mode 75
Alarm Clock 62
Alert 69
Answer Options 81
Assisted Dialing 84
Auto Pair Handsfree 67
Auto Retry 82
B
Backlight 72
Banner 71
Battery Charge Level 19
Battery Temperature
Protection 18
Bluetooth® Menu 63
C
Calculator 60
Calendar 61
Call Settings 81
Call Sounds 68
Call Waiting 21
Caller ID 21
CDG2 81
Charging the Battery 18
Charging with USB 18
Chat 40
Clock Format 75
Consumer Information on
SAR 107
Contact List 27
CONTACTS 27
Current Country 78
D
Dialed 44
Display Settings 71
Display Themes 73
Drafts 39
E
Email 40
Erasing Messages 42
Ez Tip Calculator 60
F
FCC Hearing-Aid
Compatibility (HAC)
Regulations for Wireless
Devices 108
FDA Consumer Update 97
Font Size 74
G
Games 51
Get New Ringtones 47
Glossary 115
Groups 28
I
Icon Glossary 86
Important Safety
Precautions 1
In Case of Emergency (ICE)
29
Inbox 36
L
Language 77
LIMITED WARRANTY
STATEMENT 112
Location 77
M
Main Menu Settings 73
Making Calls 19
Master Volume 68
Memory 85
Menu Fonts 74
Menus Overview 15
Messaging Settings 40
Missed 43
Mobile IM 40
Mobile Web 52
Music & Tones 47
Mute Function 21
My Device Info 66
My Name Card 30
My Number 86
N
NAM Select 81
New Contact 27
New Message 31
Notepad 63
O
One Touch Dial 84
Online Album 51
P
Phone Info 85
Phone Overview 12
Phone Settings 75
Picture Message 34
Pictures 49
Power On/Off 70
Index
VX7100 117
R
Received 43
Receiving Calls 20
S
Safety Information 91
Screen Icons 20
Security 78
Sent 38
Service Alerts 70
Set Shortcuts 76
Signal Strength 19
Sounds Settings 68
Speed Dials 28
Stopwatch 62
Supported Profiles 67
SW/HW Version 86
T
Take Picture 50
Technical Details 9
Text Input 22
TIA Safety Information 88
Tools 58
TTY Mode 82
V
Vibrate Mode 21
View Timers 45
Voice Commands 21, 58
Voice Message 36
Voicemail 39
Volume Quick Adjustment
21
W
Wallpaper 73
Wireless Sync Email 40
World Clock 62
Index
118 VX7100
MEMO
MEMO
MEMO