LG Electronics USA VX8560 Cellular/PCS CDMA Phone with Bluetooth and FM Transmitter User Manual LG VX8560

LG Electronics USA Cellular/PCS CDMA Phone with Bluetooth and FM Transmitter LG VX8560

Users Manual

1    User Manual  VX8560                      Ver. 1.0 2008. 4. 7
Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void     the user's authority to operate the equipment. "   Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to   which the receiver is connected- Consult the dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY STATEMENT  1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product. (2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user. (3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada. (4) The external housing and cosmetic parts shall not be covered under these limited warranty terms. (5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase. (6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.  2. WHAT THIS WARRANTY DOES NOT COVER: (1) Defects or damages resulting from use of the product in other than its normal and customary manner. (2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid. (3) Breakage or damage to antennas unless caused directly by defects in material or workmanship. (4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period. (5) Products which have had the serial number removed or made illegible. (6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use. (7) Damage resulting from use of non-LG approved accessories. (8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (9) Products operated outside published maximum ratings. 3 (10) Products used or obtained in a rental program. (11) Consumables (such as fuses).  3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 4. HOW TO GET WARRANTY SERVICE: To obtain warranty service, please call the following web address: www.lgeservice.com
8For Your SafetyImportant InformationThis user guide contains important information on the use andoperation of this phone. Please read all the informationcarefully for optimal performance and to prevent any damageto or misuse of the phone. Any changes or modifications notexpressly approved in this user guide could void your warrantyfor this equipment.Before You StartSafety InstructionsWARNING! To reduce the possibility of electric shock, do notexpose your phone to high humidity areas, such as thebathroom, swimming pool, etc.Always store your phone away from heat. Never store yourphone in settings that may expose it to temperatures less than32°F or greater than 104°F, such as outside during extremeweather conditions or in your car on a hot day. Exposure toexcessive cold or heat will result in malfunction, damageand/or catastrophic failure.Be careful when using your phone near other electronicdevices. RF emissions from your mobile phone may affectnearby in adequately shielded electronic equipment. Youshould consult with manufacturers of any personal medicaldevices such as pacemakers and hearing aides to determine ifthey are susceptible to interference from your mobile phone.Turn off your phone in a medical facility or at a gas station.Never place your phone in a microwave oven as this willcause the battery to explode.IMPORTANT! Please read the TIA SAFETY INFORMATION onpage 78 before using your phone.Safety InformationRead these simple guidelines. Breaking the rules may bedangerous or illegal. Further detailed information is given in thisuser guide.]Never use an unapproved battery since this could damagethe phone and/or battery and could cause the battery toexplode.]Never place your phone in a microwave oven as it willcause the battery to explode.]Do not dispose of your battery by fire or with hazardous orflammable materials.]Make sure that no sharp-edged items come into contactwith the battery. There is a risk of this causing a fire.]Store the battery in a place out of reach of children.]Be careful that children do not swallow any parts such asrubber plugs (earphone, connection parts of the phone,etc.). This could cause asphyxiation or suffocation.
9For Your Safety]Unplug the power cord and charger during lightning stormsto avoid electric shock or fire.]When riding in a car, do not leave your phone or set up thehands-free kit near to the air bag. If wireless equipment isimproperly installed and the air bag is activated, you may beseriously injured.]Do not use a hand-held phone while driving.]Do not use the phone in areas where its use is prohibited.(For example: aircraft).]Do not expose the battery charger or adapter to directsunlight or use it in places with high humidity, such as abathroom.]Never store your phone in temperatures less than- 4°F orgreater than 122°F.]Do not use harsh chemicals (such as alcohol, benzene,thinners, etc.) or detergents to clean your phone. There is arisk of this causing a fire.]Do not drop, strike, or shake your phone severely. Suchactions may harm the internal circuit boards of the phone.]Do not use your phone in high explosive areas as the phonemay generate sparks.]Do not damage the power cord by bending, twisting, pulling,or heating. Do not use the plug if it is loose as it may causea fire or electric shock.]Do not place any heavy items on the power cord. Do notallow the power cord to be crimped as it may cause fire orelectric shock.]Do not handle the phone with wet hands while it is beingcharged. It may cause an electric shock or seriouslydamage your phone.]Do not disassemble the phone.]Do not place or answer calls while charging the phone as itmay short-circuit the phone and/or cause electric shock orfire.]Only use the batteries, antennas, and chargers provided byLG. The warranty will not be applied to products provided byother suppliers.]Only authorized personnel should service the phone and itsaccessories. Faulty installation or service may result inaccidents and consequently invalidate the warranty.]Do not hold or let the antenna come in contact with yourbody during a call.]An emergency call can be made only within a service area.For an emergency call, make sure that you are within aservice area and that the phone is turned on.
10For Your SafetyFCC RF Exposure InformationWARNING! Read this information before operating the phone.In August 1996, the Federal Communications (FCC) of he UnitedStates, with its action in Report and Order FCC 96-326, adoptedan updated safety standard for human exposure to radiofrequency (RF) electromagnetic energy emitted by FCCregulated transmitters. Those guidelines are consistent withthe safety standard previously set by both U.S. andinternational standards bodies.The design of this phone complies with the FCC guidelines andthese international standards.CAUTIONUse only the supplied and approved antenna. Use ofunauthorized antennas or modifications could impair callquality, damage the phone, void your warranty and/or result inviolation of FCC regulations. Do not use the phone with adamaged antenna. If a damaged antenna comes into contactwith skin, a minor burn may result. Contact your local dealerfor a replacement antenna.Body-worn OperationThis device was tested for typical body-worn operations withthe back of the phone kept 0.79 inches (2cm) between theuser’s body and the back of the phone. To comply with FCC RFexposure requirements, a minimum separation distance of 0.79inches(2cm) must be maintained between the user's bodyand the back of the phone. Third-party belt-clips, holsters, andsimilar accessories containing metallic components should notbe used. Body-worn accessories that cannot maintain 0.79inches(2cm) separation distance between the user's bodyand the back of the phone, and have not been tested for typicalbody-worn operations may not comply with FCC RF exposurelimits and should be avoided.
11For Your SafetyVehicle Mounted External Antenna(optional, if available)A minimum separation distance of 8 inches (20cm) must bemaintained between the user/bystander and the vehiclemounted external antenna to satisfy FCC RF exposurerequirements. For more information about RF exposure, visitthe FCC website at www.fcc.govFCC Part 15 Class B ComplianceThis device and its accessories comply with part 15 of FCCrules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmfulinterference, and (2) this device and its accessories mustaccept any interference received, including interference thatmay cause undesired operation.Cautions for Battery]Do not disassemble.]Do not short-circuit.]Do not expose to high temperature: 60°C (140°F).]]Do not incinerate.Battery Disposal]Please dispose of your battery properly or bring to yourlocal wireless carrier for recycling.]Do not dispose in fire or with hazardous or flammablematerials.Adapter (Charger) Cautions]Using the wrong battery charger could damage your phoneand void your warranty.]The adapter or battery charger is intended for indoor useonly.Do not expose the adapter or battery charger to direct sunlightor use it in places with high humidity, such as the bathroom.
2 LIMITED WARRANTY STATEMENT  1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product. (2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user. (3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada. (4) The external housing and cosmetic parts shall not be covered under these limited warranty terms. (5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase. (6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.  2. WHAT THIS WARRANTY DOES NOT COVER: (1) Defects or damages resulting from use of the product in other than its normal and customary manner. (2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid. (3) Breakage or damage to antennas unless caused directly by defects in material or workmanship. (4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period. (5) Products which have had the serial number removed or made illegible. (6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use. (7) Damage resulting from use of non-LG approved accessories. (8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (9) Products operated outside published maximum ratings.
3 (10) Products used or obtained in a rental program. (11) Consumables (such as fuses).  3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.  4. HOW TO GET WARRANTY SERVICE: To obtain warranty service, please call the following telephone number from anywhere in the continental United States:  LG Infocomm Inc. 201 James Record Road Huntsville, AL 35824 Tel. 1-800-793-8896 Fax. 1-800-448-4026 www.lgeservice.com  DO NOT RETURN YOUR PRODUCT TO THE ABOVE ADDRESS. Please call or write for the location of the LG Electronics, Inc authorized service center nearest you and for the procedures for obtaining warranty claims.
4 SUBJECT  The phone VX8560 has been designed to operate on the latest digital mobile communication technology, Code Division Multiple Access (CDMA). The phone VX8560 support fully Multimedia - Color LCD, 72 Poly Audio, 3.2M pixels Digital Camera, MPEG-4, Photo album, etc. This phone is the one of tri band Quad mode - 800Mhz CDMA, 1900Mhz PCS, 1500Mhz GPS.   CDMA Standard  Designator  Description Basic air interface  TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000 CDMA Dual-Mode Air Interface 14.4kbps radio link protocol and inter-band operations IS-95 adapted for PCS frequency band CDMA2000 1xRTT Air Interface Network TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124 MAS-BS PCSC-RS Intersystem operations Nom-signaling data comm. Service TIA/EIA/IS-96-B TIA/EIA/IS-99 TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 Speech CODEC Assign data and fax Short message service Packet data Position Determination Service (gpsOne) Performance TIA/EIA/IS-97 TIA/EIA/IS-98 ANSI J-STD-018 ANSI J-STD-019 TIA/EIA/IS-125 Cellular base station Cellular mobile station PCS personal station PCS base station Speech CODEC EVDO TIA/EIA/IS-856 TIA/EIA/IS-878  TIA/EIA/IS-866  TIA/EIA/IS-890 CDMA2000 High Rate Packet Data Air Interface   1xEV-DO Inter-Operability Specification for CDMA2000 Access Network Interfaces Recommended Minimum Performance Standards for CDMA2000 High Rate Packet Data Access Terminal Test Application Specification(TAS) for High Rate Packet Data Air Interface * TSB –74: Protocol between an IS-95A system and ANSI J-STD-008
11 Getting Started  Unlocking Your Phone  If you received your VX8560 in the mail, you may need to unlock it before making calls.    1. Press the END/PWR Switch for 2~3 seconds.  2. Press soft key Unlock.  3.    Enter your four-digit lock code. For security purposes, the code will not be visible as you type.       Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Phone Number or 0000.  View of Phone   1.   key : Lets you power the phone on or off.  2. Antenna: Internal antenna provides optimum reception for 800 MHz & 1900 MHz frequencies.  3. Power On Indicator: Illuminates red when the phone powers on with power on sound indicator.    4. Headset Jack: Provides connection for an optional headset.  5. Volume Control Keys: Adjust the Ring Volume in the Main Menu or the Voice Volume during a call. The keys also scroll through mouths in the Calendar or pages in the Mini Browser.  6. OK: select menu options.  7.   : Lets you clear an entry or back-up in the menu.  Installing and Removing the Battery
12 To install the battery, insert the bottom of the battery into the back of the phone. Then, push the battery down until the latch clicks.  To remove the battery, press up on the latch and remove the battery from the phone.  Turning Your Phone On and Off  To turn your phone on, push the On/Off Switch    for 2 ~3 seconds. Your phone performs a short self-test before letting you know it is operational.  If your phone does not turn on, make sure the battery is installed correctly and is adequately charged or has external power (via the AC Adapter, Cigarette Lighter Adapter).  To turn your phone off, push the On/Off Switch    for 2 ~3 seconds.  Main Menu  When your phone acquires Service, the Greeting (a banner of text), the current time and date and the Main Menu are displayed. If you are in authorized cellular provider’s service area, you are ready to send and receive calls.   Power Save Mode  When the phone is in an area without service for 15 minutes, it stops searching for service and enters into the power Save Mode. When your phone activates this feature, Power Save is displayed on your screen. The phone automatically checks for service periodically or you can check manually by pressing any key.
13 Menu Navigation    The Navigation Key lets you scroll circularly through menus quickly and easily    As you navigate through a menu, the options are highlighted (Highlighted Test Example ) . Select an option by highlighting it and pressing  . The scroll bar at the right of the menu keeps track of your position in the menu at all times.  For example, if you want to view your last incoming call:    1. From the Main Menu, select RECENT CALLS and press “2. Received“ (It may already be highlighted.)  2.   Press the OK Key down    to highlight and press .    If you have received any calls, they are displayed on the screen.  Entering Characters Using the Keypad(T9)  To enter a letter, punctuation or number when creating Phone Book or Scheduler entries, press the corresponding key until the desired character appears. By default, the first letter of a word is capitalized and following letters are lowercase. Characters in the following order:     1 . ? , ‘ & - @ ( ) / ~       P Q R S 7 p q r s     A B C 2 a b c 2                   T U V 8 t u v 8        D E F 3 d e f 3                     W X Y Z 9 w x y z 9        G H I 4 g h i 4           Next 0 Incoming Log 1
14     J K L 5 j k l 5           Shift     M N O 6 m n o 6           Space   After a character is entered, the cursor automatically advances to the next space after two seconds. You can also advance the cursor by pressing    or entering a character not on the same key.  If you make a mistake, press “Left Navigation Key” to move the cursor left or [CLR] to erase a character. To clear the entire entry, press and hold [CLR] for two seconds.
15 Display Icons     Display icons are the symbols your phone uses to communicate important information. They are as follows:  ICON                    DESCRIPTION  3G send  3G receive  3G send receive  Alarm  Battery  Antenna  In use  No service  Location  Location out        Voice  Voice Privacy  Vibrate  Roaming  TTY  SSI  Ringer  Ringer off  Text + voice
16  Antenna  The antenna on your VX8560 provides maximum reception by holding the phone upper position.   Signal Strength  The quality of each call you make or receive depends on the signal strength on your area. The number of bars in the Signal Strength icon informs you of the current strength. The more bars, the stronger the signal.   Battery Capacity  Your VX8560 is equipped with a Lithium Polymer battery. It allows you to recharge your battery before it is fully drained. The battery provides approximately 180 minuets of continuous digital talk time or approximately 110 hours of continuous digital standby time.  Note: Long backlight settings affect the battery’s talk and standby times.    When the battery reaches 5% of its capacity, the battery icon blinks. When there is about one minute of talk time left, the phone sounds an audible alert every 30 seconds and then powers down.  If the battery’s charge is completely run down, it takes 2 to 3 hours to fully recharge. It is not necessary to let the battery completely run down before recharging.  To charge your batteries, use only approved charging accessories. 3.25
17  Using the AC Adapter  To charge the battery, plug the AC Adapter into a standard wall outlet and connect it to the phone via the I/O Connector on the bottom of the phone. Alternatively, you can place the phone in the charging cradle provided with your phone and connect the AC Adapter to the back of the cradle.  The battery Charge Status icon flashes during charging. When the battery is fully charged, the battery icon stops flashing.     Using Your Phone   Placing a Call  When the phone is turned on, check the Signal Strength icon to see of you are in a Service Area or authorized PCS CDMA provider’s service area.  1. Flip  up the phone.  2.    Enter the phone number and press [SEND]  .     ☞Tip! When dialing long distance, it is not necessary to dial a “1” before the area code.  3. When you are finished with your call and press [END]  .  Roaming With Your Phone  Your Phone is you can use it to make and receive calls in many places.  Setting Your Phone’s Mode  Your Phone allows you to control your ability to roam. (See “Set Mode”)  Calling Experience
18 When you use your phone on other PCS CDMA networks, your calling experience and call quality will be quite similar to what you experience when making calls within the Network. Although certain calling features may not be available, your phone calls are still private and secure.  Correcting Dialing Mistakes  To delete one digit at a time, press  . To delete all digits, press and hold  .  Redialing Last Outgoing Number  Press and hold [SEND]   for 2 seconds.  Dialing Options (phone book – Not Functioning)  When you enter numbers in the Main Menu, dialing options are displayed. To display a Phone Book entry, enter its entry number. To select an option, highlight it and press [SEND]  .(Menu display only,  phone book – Not Functioning)  z Call – Dials the phone number.  z Save – Saves the phone number in your Phone Book. (See “Saving a Phone Number” on the following page.)  z Wait – Inserts a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses” )  z 2- Second pause – Inserts a two-second pause. (See “ Dialing and Saving Phone Numbers With Pauses” )  z End Key Press – Returns to the Main Menu.  z A Phone Book Entry – Displays the Phone Book entry. To dial the entry’s speed-dealing number, press and hold [SEND]  . To dial an alternate number, highlight it and press and hold [SEND] . ☞Tip! To speed dial a Phone Book entry from the Main Menu, press and hold the entry’s number.
19 If the entry number is two digits, enter the first digit, then press and hold the second digit. (This feature will not work when the Roam Confirm option is enabled.)   In Call Options  During a call, your phone displays menu options in addition to the Main Menu. To select an option, Highlight it and press [OK]  .( functions ‘Send’ and ‘End’ only)  z End Call - Ends the call  z Send Tones - Sends the next set of numbers after a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses “ on the previous page.)  z Mute or Unmute – Select Mute to mute your phone’s microphone. Select Unmute to reactivate the microphone.  z Dial 3-Way Call – Lets you dial another phone number.   . z Flash – Answers an incoming Call Waiting call or connects the third party for Three-Way Calling..  Incoming Call Notification  Depending on your settings, your phone notifies you of incoming calls in the following ways:  z The phone rings or vibrates  z The backlight illuminates  z The screen displays an incoming call message  z The phone number of the caller is displayed of the phone number is available  z The caller’s name is displayed if the phone number is in your Phone Book
20 The following options are also displayed. To select an option, highlight it and press [SEND]  .  z Send Key Press – answers the call.  z Silent Ringer – Mutes the ringer.  Note: You can also mute the ringer by pressing the up or down Volume Control key or [END] .  Answering Calls  To answer incoming calls, press [SEND]  .     Displaying Your Phone Number(phone book – not functioning)  To display your phone number:  1. From the Main Menu, select SETTINGS & TOOLS.    2. And go to 11.Phone Info and select 1.My Number.   Setting the Ring Volume to Vibrate   To set the phone to Vibrate Mode, press the down Volume Control key until Vibrate Only is displayed. The phone will vibrate and – Vibrate On- is displayed above the Main Menu.   To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume” .
21 Getting the Most From Service  <SMS-Pic1>  Retrieving Page/Text Messages  To retrieve page/text messages:  1. From the Messaging    2. Highlight Inbox and press [OK]. Highlight the message you want to display and press [OK]  .  To select an option, highlight it and press [OK]  .  Text Message options:  z    Reply  z    Reply With Copy  z    Forward
22  z    Lock    z    Add To Contacts  z    Erase Inbox  z    Manage Inbox  z    Message Info.   Erasing All Page/Text Messages  1. From the Messages Menu, Press [Options]  2. Highlight Erase All and press [OK]  . 3. Highlight    Yes and press [OK]  .  Page/Text Message Storage  Your VX8560 can store up to 200 page/text messages. When the message memory is 100% full, a warning message prompts you to erase messages to obtain more memory space.    Roaming on to Other Service Providers  Roaming occurs when you are in an area serviced by another authorized service provider. When this situation occurs, the R icon and Digital Roam of Analog Roam are displayed. If there is no service available, the  ☎ icon is displayed.
23 Page/Text Messages  For information on page/text messages, see “Retrieving Page/Text Messages” .   Sounds  Adjusting the Volume  1. From the SETTINGS & TOOLS , highlight Sounds Settings and press [OK]  .  2. Highlight Master Volume and press [OK].  .  3. Highlight Ringer or Key Beep and press [OK]  .  ☞Tip! You can use the Volume Control keys to adjust the Ring Volume in the Main Menu or the Voice Volume during a call.  4. Highlight High,  Medium High, Medium, Medium Low, Low, Vibrate Only, Alarm Only or All  Sounds Off (for Ringer only) and press [SET].  Note: When the phone is in Vibrate On Mode and attached to and accessory (Desktop Charger, Hands-Free Car Kit, etc.), it uses the Standard Ring Type to alert you of incoming calls, alarms or messages.  Selecting Ring Types for Voice Calls  To Select a Ring Type for Voice Calls:  1. From the Main Menu, highlight SETTINGS & TOOLS/Sounds Settings and press [OK]  .
24 2. Highlight Call Sounds and press [OK]  .  3. Highlight Call Ringtone and press [OK]  .  4. Highlight Caller ID, No Caller ID, Restrict Calls or All Calls and press [OK]  .  Note: If you select Roaming, the Ring Type is used for all incoming roaming calls.  5. Highlight a Ring Type and press [OK]  . You will hear a preview of the Ring Type when you highlight it.  ☞Tip! You can also assign different Ring Types to individual Phone Book entries.    Selecting Ring Types for Messages  To select a Ring Type for Messages:  1. From the SETTINGS & TOOLS menu, highlight Sounds Settings and press [OK]  .  2. Highlight Alert Sounds and press [OK]  .  3. Highlight TXT Message , Pic-Video Message , Voicemail and press [OK]  .  4. Highlight a Ring Type and press [OK]  .
25 Service Alert Notification  To enable of disable alert sounds:  1.    From the SETTINGS & TOOLS menu, highlight Sounds Settings and press [OK]  .  2.    Highlight Service Alerts and press [OK]  .  3.    Select an alert by highlighting it and pressing [OK]  .  z ERI Sounds.  z Minute Beep – Your phone beeps once a minute when you are on a call. (The beep is not audible to the other party.) z Call Connect z Charge Complete  4.    Highlight ON or Off and press [OK]  .     Display   For information on changing Backlight or Banner, Greeting or Contrast settings, see Handy Tips.  Display Menu  Security  Accessing the Security Menu
26 You must enter your lock code to view the Security menu. If you forget your lock code, try using the last four digits of your Social Security number, the last four digits of your Phone Number or 0000.   Security Menu  To access the Security menu:  1. From the SETTING & TOOLS, select Phone Settings and press Security.  2. Enter your lock code.  Locking Your Phone    When your phone is locked, you can only make calls to 911, Customer Care and Special Numbers or receive incoming calls.  To lock your phone:  1. From the Security menu, highlight Phone Lock and press [OK]  .  2. Highlight On Power up and press [OK]  . If you select On Power Up, the phone will be locked each time it power up.   Unlocking Your Phone  1. Highlight Phone Lock and press [OK]  . 2.    Highlight Unlocked, and press [OK].   Changing the Lock Code
27 To change your lock code:  1. From the Security menu, highlight Edit Code and press [OK]  .  2. From the Edit Code , highlight Phone Only and press [OK].  3. Enter your new lock code.  4.      Reenter your new lock code.    Selecting Answer Option  You can select different answering options.  To answer calls automatically or by pressing any key:  1. From the SETTING & TOOLS, select Call Settings and press Answer Options.  To select and option, highlight it and press [OK]  .  z Flip Open – You can answer incoming calls by flip open  z Any Key - You can answer calls by pressing any key (not including the [CLR] key, Mouse Key or Volume Control keys).  z Auto with Handsfree - Your phone answers incoming calls automatically after five seconds.
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices  On July 10, 2003,  the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids.  The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities.    While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.  The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices.  Not all phones have been rated.   Phones that are rated have the rating on their box or a label located on the box.   The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss.  If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully.  Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.  M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.  Hearing devices may also be rated.  Your hearing device manufacturer or hearing health professional may help you find this rating.  Higher ratings mean that the hearing device is relatively immune to interference noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use.  A sum of 6 is considered for best use.      In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5.  This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal quality that is acceptable for normal operation.   The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard.

Navigation menu