LG Electronics USA W1952TQT LCD MONITOR User Manual IP0753 L226WT Eng 05 1022 OK

LG Electronics USA LCD MONITOR IP0753 L226WT Eng 05 1022 OK

USERS MANUAL

Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference.See the label attached on the product and give the information to yourdealer when you ask for service.W1952S W2252SUser’s Guide
A1This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential electrical  shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, use, and servicing.On SafetyUse only the power cord supplied with the unit. In case you use another powercord, make sure that it is certified by the applicable national standards if not beingprovided by the supplier. If the power cable is faulty in any way, please contact themanufacturer or the nearest authorized repair service provider for a replacement.The power supply cord is used as the main disconnection device. Ensure that thesocket-outlet is easily accessible after installation.Operate the display only from a power source indicated in the specifications ofthis manual or listed on the display. If you are not sure what type of power supplyyou have in your home, consult with your dealer.Overloaded AC outlets and extension cords are dangerous. So are frayed powercords and broken plugs. They may result in a shock or fire hazard. Call your servicetechnician for replacement.Do not Open the Display.There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly.To Avoid Personal Injury :Do not place the display on a sloping shelf unless properly secured.Use only a stand recommended by the manufacturer.Do not drop an object on or apply impact to the product. Do not throw any toysor objects on the product screen. It can cause injury to human, problem to product and damage the display.  To Prevent Fire or Hazards:Always turn the display OFF if you leave the room for more than a short periodof time. Never leave the display ON when leaving the house.Keep children from dropping or pushing objects into the display's cabinetopenings. Some internal parts carry hazardous voltages.Do not add accessories that have not been designed for this display.When the display is to be left unattended for an extended period of time, unplugit from the wall outlet.In the presence of thunder and lightning, never touch the power cord and signalcable because it can be very dangerous. It can cause electric shock. Important Precautions
A2Important PrecautionsOn InstallationDo not allow anything to rest upon or roll over the power cord, and do not place thedisplay where the power cord is subject to damage.Do not use this display near water such as near a bathtub, washbowl, kitchen sink,laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the release ofheat generated during operation. If these openings are blocked, built-up heat cancause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.Place the display in a built-in enclosure unless proper ventilation is provided.Cover the openings with cloth or other material.Place the display near or over a radiator or heat source.Main power breaker is the power cord and this breaking device must be located ata location where it is easy to operate.  Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,mar, or damage the Active Matrix LCD permanently.Do not press the LCD screen with your finger for a long time as this may causesome afterimages.Some dot defects may appear as Red, Green or Blue spots on the screen.However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality foryour LCD display. If used under any mode except the recommended resolution,some scaled or processed images may appear on the screen. However, this ischaracteristic of the fixed-resolution LCD panel.On CleaningUnplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the displayscreen because over-spraying may cause electrical shock.On RepackingDo not throw away the carton and packing materials. They make an idealcontainer in which to transport the unit. When shipping the unit to anotherlocation, repack it in its original material.On DisposalThe fluorescent lamp used in this product contains a small amount of mercury.Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regulations ofyour local authority.
Important PrecautionsNOTETHE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY NOTEThis epuipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of  the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequencycause harmful interference to radio communications.However,there is noguarantee that interference will not occur in a particular installation.If this which can be determined by turning the equipment off and on,the user isencouraged to try to correct the interference by one or more of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and the receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.energy and,if not installed and used in accordance with the instructions,may equipment does cause harmful interference to radio or television reception,TO OPERATE THE EQUIPMENT. -Consult the dealer or an experienced radio/TV technician for help.A3
3.Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.Stand BodyStand BaseStand Body Hinge Body5.Once assembled take the monitor up carefully and face the front side4.Insert the Cable Deco Cover in the Stand Body in the correct direction.Stand BodyStand Base Cable Deco Cover Cable Deco CoverBefore setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off.Connecting the stand 1.Place the monitor with its front facing downward on a soft cloth.2.Assemble the Stand Body into the product in the correct direction as shown in the picture. A3Connecting the DisplayImportantThis illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot.
A4Disassembling the stand1.Put a cushion or soft cloth on a flat surface.4.Press the knob, Take off the stand base from stand body5.Please pull the stand body lightly to separate it from the hinge body. 2.Place the monitor face down on the cushion or soft cloth.3.Slide the Cable Deco Cover out from the stand body.Connecting the Display
Connecting the DisplayA5Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display1. Adjust the position of the panel in various ways for maximum comfort.Tilt Range: -5˚~20˚ ErgonomicIt is recommended that in order to maintain an ergonomic and comfortable viewingposition, the forward tilt angle of the monitor should not exceed 5 degrees.
Fix the power cord & signal cable as shown in the picture.A6Using the Computer1.Make sure to turn off the computer and  product. Connect the cable as below sketch mapform to .13. Press        button on the front switch panel to turn the power on.When monitor power is turned on, the  'Self Image SettingFunction' is executed automatically.(Only Analog Mode)NOTE‘ Self Image Setting Function’?  This function provides the user with optimal display settings.When the user connects themonitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function?  When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screenwhile using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 2Connecting the DisplayWall-outlet typePower Cord Analog signalD-subAC-INABConnect Dsub Cable (PC)Connect Dsub Cable (Mac)PC-outlet typeMac adapterFor Apple Macintosh use, a  separate plug adapter is needed tochange the 15 pin high density (3 row) D-sub VGA connector onthe supplied cable to a 15 pin  2 row connector.2. Insert the Cable Deco Cover in the Stand Body in the correct direction.
Control Panel FunctionsMENU ButtonUse this button to enter or exit from the On Screen Display.Control FunctionOSD LOCKED/UNLOCKEDThis function allows you to lock the current controlsettings, so that these settings are not inadvertentlychanged. To lock the OSD settings, press and hold theMENU button for several seconds. The message "OSDLOCKED" appears.You can unlock the OSD settings at any time by pushingthe MENU button for several seconds. The message"OSD UNLOCKED" appears.Front Panel ControlsUse this button to enter EZ ZOOMING,4:3 IN WIDE,PHOTO EFFECT,JINGLE item,for more information,refer to page A15-A16.FUN Button1Use this button to enter On Screen Display Sub-menu to adjust the BRIGHTNESS directly.231 2 3 4 567A7
Control Panel FunctionsA8This Indicator lights up as blue when the display isoperating normally(On Mode). If the display is inSleep Mode (Energy Saving), this indicator color willchanges to amber.Use this button to turn the display on or off.Power ButtonPower IndicatorUse this button to selection an icon in the On Screen Display.AUTO/SETButtonAUTO IMAGE ADJUSTMENTWhen adjusting your display settings, always pressthe AUTO/SET button prior to entering the OnScreen Display(OSD). This will automatically adjustyour display image to the ideal settings for thecurrent screen resolution size (display mode).The best display mode isW1952S : 1440 x 900W2252S : 1680 x 1050Control FunctionButtonsUse these buttons to select or adjust functions in theOn Screen Display.For more information, refer to page A17.6547MOVIESET MENUXXENGINE,
On Screen Display (OSD) Control AdjustmentScreen AdjustmentMaking adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The following section is an outline of the available adjustments and selectionsyou can make using the OSD.To make adjustments in the On Screen Display, follow these steps:Press the MENU Button, then the main menu of the OSD appears.To access a control, use the   or     Buttons. When the icon you wantbecomes highlighted, press the AUTO/SET Button.Use the     /     Buttons to adjust the image to the desired level. Use theAUTO/SET Button to select other sub-menu items.Push the MENU Button once to return to the main menu to select anotherfunction. Push the MENU Button twice to exit from the OSD.NOTEAllow the display to stabilize for at least 30 minutes before making image adjustments.A9
NOTEThe order of icons may differ depending on the model (A10~A17 ).On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus.A10To adjust the brightness,contrast and gamma of thescreenPICTURECOLORTRACKINGSETUP Main menu Sub-menu A                       ReferencePRESETREDGREENBLUETo adjust the position of thescreen To customize the color ofthe screenTo customize the screenstatus for a user's operatingenvironmentBRIGHTNESSCONTRASTGAMMALANGUAGEOSD         HORIZONTALPOSITION  VERTICALsRGB6500K9300K: AdjustableA : Analog InputTo select or customize desired image settingsFLATRON F-ENGINEMOVIE / INTERNETUSERNORMALDEMOEZ ZOOMING 4:3 IN WIDEPHOTO EFFECTJINGLETo adjust the image sizeTo adjust the resolutionTo adjust screen colorTo select or turn off the soundNORMALGAUSSIAN BLURSEPIAMONOCHROMEHORIZONTALVERTICALCLOCKPHASESHARPNESSWHITE BALANCERTCPOWER INDICATORFACTORY RESET
On Screen Display(OSD) Selection and Adjustment NOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.Sub-menusButton TipIconsYou were introduced to the procedure of selecting and adjusting an itemusing the OSD system.  Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.Press the MENU Button, then the main menu of the OSD appears.Menu NamMain MenueMENU        : Exit: Adjust (Decrease/Increase)SET        : Enter: Select another sub-menu+-A11PICTURE COLOR TRACKING SETUP
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionBRIGHTNESSCONTRAST GAMMATo adjust the brightness of the screen. To adjust the contrast of the screen.Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues display high contrast images.PICTUREPRESETREDGREENBLUE• sRGB: Set the screen color to fit theSRGB standard colorspecification.• 6500K: Slightly reddish white.• 9300K: Slightly bluish white.Set your own red color levels.Set your own green color levels.Set your own blue color levels.COLORMENU : Exit: Decrease: IncreaseSET     : Select another sub-menu-+MENU : Exit: Decrease: IncreaseSET    : Select another sub-menu-+ PICTURECOLORA12Main menu Sub menu Description
MENU : Exit: Decrease: IncreaseSET     : Select another sub-menuHORIZONTALVERTICALTo move image left and right.To move image up and down.POSITION-+CLOCK To minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange.PHASE To adjust the focus of the display. This item allows you to remove anyhorizontal noise and clear or sharpenthe image of characters.SHARPNESSTo adjust the clearness of the screen.TRACKINGOn Screen Display(OSD) Selection and Adjustment A13Main menu Sub menu Description
Press the             button to reset immediately.If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only whenthe input signal is an analog signal. SETUPTo choose the language in which thecontrol names are displayed.To adjust position of the OSD windowon the screen.LANGUAGEOSDPOSITIONWHITEBALANCEFACTORYRESETIf the output of the video card is differentthe required specifications, the colorlevel may deteriorate due to videosignal distortion. Using this function, thesignal level is adjusted to fit into thestandard output level of the video cardin order to provide the optimal image.Activate this function when white andblack colors are present in the screen.   POWERINDICATORRestore all factory default settings except"LANGUAGE." Use this function to set the powerindicator on the front side of the monitorto ON or OFF.If you set OFF, it will go off. If you set ON at any time, the powerindicator will automatically be turned on.,SETUPMENU : Exit: Adjust: AdjustSET     : Select another sub-menuMain menu Sub menu Description-+On Screen Display(OSD) Selection and Adjustment A14
A15On Screen Display (OSD) Selection and Adjustment Main menu Sub menu DescriptionEZ   ZOOMING 4:3   INWIDEPHOTOEFFECTJINGLEON  A++The OSD screen will appear when you touch the FUN button on the left bottom of the monitor.*This function is operated only if the forteManager is installed to PC.EZ ZOOMING4:3 IN WIDEEZ   ZOOMING4:3   INWIDE++To select the image size of the screen.WIDE 4:34:3*4:3 :Depending on the input video signal ratio,it is automatically changed to an   optimized screen ratio.  At the current display, select ‘EZ ZOOMING', then the display resolution is transferred to the one step low resolution.Select 'EZ ZOOMING' one more, the display is back to the original display.*Only one touch of ez-zoom, you can fine the best resolution you want and it is possible to magnify the size of characters and pictures for the old not having good eye sight, housewives not dealing with computer well and children.
A16On Screen Display (OSD) Selection and Adjustment Main menu Sub menu DescriptionTo turn the Buzzer sound on or off.DC power OnDC power OffMain Button Menu OnFun Button Menu OnMenu OffThe Buzzer sound operates in below Use ‘AUTO/SET’ button to select sound (four kinds of Buzzer sound) or turn off the sound,and use ‘MENU’ button to save the selection and exit the OSD menu. cases:NORMAL:The PhotoEffect function is disabled.PHOTO EFFECTJINGLEGAUSSIAN BLUR:This option is to add the effect to the screen that the dark and sharp image becomes brighter and more blurred.SEPIA:This option changes the screen to be Sephia tone. The Sephia tone is brown color tone.MONOCHROME:This option changed the screen to be Gray tone.The screen is displayed by white, black, gray.JINGLEON  APHOTOEFFECT----PHOTO  EFFECTNORMALSET MENU
On Screen Display(OSD) Selection and Adjustment A17Main menu Sub menu DescriptionThe OSD screen will appear when you touch the                    button on the left bottom of the monitor.MOVIEINTERNETNORMALDEMOUSERMOVIESET MENUXXENGINEMOVIESET MENUXXENGINENORMALSET MENUXXENGINEUSERSET MENUXXENGINEBRIGHTNESSACERCMSAVE NOSET MENUXXENGINE5012Menu NameIconsSub-menu NameINTERNET: For text images (Word   processing etc.)MOVIE: For animation images in videos   or movies This feature lets you easily select the best desired image condition optimized to the environment(ambient illumination, image types etc).UserYou can manually adjust brightness, ACE or RCM.You can save or restore the adjusted value even when using a different environment.   ...(Brightness): ...ACE(Adaptive Clarity Enhancer):Selects the clarity mode....RCM(Real Color Management):Selects the color mode.Not appliedGreen enhance Flesh toneColor Enhance0123Select the          sub-menu using the AUTO/SET button and save the YESvalue using the  buttons.SAVEThis is under normal operating conditions.This is just for advertising to customer in the shops. It’s setting is same with Movie mode and screen is divided by half.Adjusts screen brightness.,
TroubleshootingNo image appearsCheck the following before calling for service.No image appearsDo you see a "OSD LOCKED" message on the screen?●Is the power cord of thedisplay connected?●Is the power indicatorlight on?●Is the power on and thepower indicator blue orgreen?●Is the power indicatoramber?●Do you see an "OUT OFRANGE" message onthe screen?●Do you see a "CHECKSIGNAL CABLE"message on thescreen?• Check and see if the power cord is connectedproperly to the power outlet.• Press the Power button.• Adjust the brightness and the contrast.• If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboard tobring up the screen.• Try to turn on the PC.• This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.• This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.• You can secure the current control settings,so that they cannot be inadvertently changed.You can unlock the OSD controls at any timeby pushing the MENU button for severalseconds: the message “OSD UNLOCKED” will appear.●Do you see “OSDLOCKED” when youpush MENU button?A18
A19TroubleshootingDisplay image is incorrect●Display Position isincorrect.●On the screenbackground, verticalbars or stripes arevisible.●Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.• Press the AUTO button to automatically adjustyour display image to the ideal setting. If the results are unsatisfactory, adjust the imageposition using the H position and V position iconin the on screen display.• Press the AUTO button to automatically adjustyour display image to the ideal setting.If the results are unsatisfactory, decrease thevertical bars or stripes using the CLOCK icon inthe on screen display.• Press the AUTO button to automatically adjustyour display image to the ideal setting.If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.• Check Control Panel --> Display --> Settingsand adjust the display to the recommendedresolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits(true color).ImportantCheck Control Panel --> Display --> Settings and see if the frequency or theresolution were changed. If yes, readjust the video card to the recommendresolution.Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10. If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounterproblems such as blurred letters, blurry screen, cut-off screen display or tilted screen.The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card    performance. In this case, please ask to the computer or the video card  manufacturer.
A20TroubleshootingHave you installed the display driver?●Have you installed thedisplay driver?●Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message?• Be sure to install the display driver from the displaydriver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver fromour web site: http://www.lge.com.• Make sure to check if the video card supportsPlug&Play function.Display image is incorrect●The screen color ismono or abnormal.●The screen blinks.• Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.• Make sure the video card is properly inserted inthe slot.• Set the color setting higher than 24 bits (true color)at Control Panel - Settings.• Check if the screen is set to interlace mode and ifyes, change it to the recommend resolution.
Specifications W1952SNOTEInformation in this document is subject to change without notice.DisplaySync InputVideo InputResolutionPlug&PlayPowerConsumptionDimensions& WeightTilt RangePower InputEnvironmentalConditionsStand BasePower cord 19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating19 inches viewable0.285*0.285 mm pixel pitchHorizontal Freq. Analog : 30 - 83 kHz (Automatic)Vertical Freq. 56 - 75 Hz (Automatic)Input Form Separate TTL, Positive/NegativeSOG (Sync On Green) Signal Input 15 pin D-Sub ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm)Max Analog : VESA 1440 x 900 @ 75 HzRecommend VESA 1440 x 900 @60 HzDDC2ABOn Mode : 36W(Typ.)Sleep Mode ≤ 1 WOff Mode ≤ 1 WWith Stand Without StandNet 3.9 kg (8.6 lbs)Tilt -5˚~20˚AC 100-240V~ 50/60Hz 0.8A Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 90 % non-CondensingAttached (     ), Detached ( O )Wall-outlet type or PC-outlet typeWidth 45.15 cm / 17.78 inches 45.15 cm / 17.78 inchesHeight 38.60 cm / 15.20 inches 35.30 cm / 13.90 inches Depth 22.00 cm /   8.66 inches 7.80 cm /   3.07 inchesA21
Specifications        W2252SDisplaySync InputVideo InputResolutionPlug&PlayPowerConsumption(without speaker)Dimensions&WeightTilt RangePower InputEnvironmentalConditionsStand Base Signal cablePower cord 22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating22 inches viewable0.282*0.282 mm pixel pitchHorizontal Freq. Analog : 30 - 83 kHz (Automatic)Vertical Freq. 56 - 75 Hz (Automatic)Input Form Separate TTL, Positive/NegativeSOG (Sync On Green) Signal Input 15 pin D-Sub ConnectorInput Form RGB Analog (0.7 Vp-p/ 75 ohm)Max Analog : VESA 1680 x 1050 @60 HzRecommend VESA 1680 x 1050 @60 HzDDC2AB On Mode :        40W(Typ.)Sleep Mode ≤ 1 WOff Mode ≤ 1 WWith Stand Without StandNet 4.4 kg (9.7 lbs)Tilt -5˚~20˚AC 100-240V~ 50/60Hz 1.0A Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 90 % non-CondensingAttached (     ), Detached ( O )Attached (     ), Detached ( O )Wall-outlet type or PC-outlet typeWidth 51.90 cm / 20.43 inches 51.90 cm / 20.43 inchesHeight 42.70 cm / 16.81 inches 39.60 cm / 15.59 inches Depth 22.00 cm /   8.66 inches 7.90 cm /   3.11 inchesNOTEInformation in this document is subject to change without notice.A22
SpecificationsPreset Modes (Resolution)Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)1234567891011121314*15**16640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 6241024 x 7681024 x 7681152 x 8701152 x 9001280 x 10241280 x 10241440 x 9001440 x 9001440 x 90031.46931.46831.46937.50037.87946.87549.72548.36360.12368.68161.80563.98179.97655.50055.93570.63570706075607575607575656075606075*Recommend Mode**Only Analog ModeDisplay Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)*Recommend Mode19 inch monitor22 inch monitor1234567891011*12720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681152 x 8641280 x 10241280 x 10241680 x 10501680 x 105031.46831.46937.50037.87946.87548.36360.12367.50063.98179.97664.67465.290706075607560757560756060IndicatorOn ModeSleep ModeOff ModeblueamberOffLED ColorMODEIndicatorA23
Digitally yours

Navigation menu