LG Electronics USA W2061TQV LCD MONITOR User Manual W2600V ENG

LG Electronics USA LCD MONITOR W2600V ENG

Users Manual

Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference.See the label attached on the product and give the information to yourdealer when you ask for service.W2061TQUser’s Guide
A1This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation, use, and servicing.On SafetyUse only the power cord supplied with the unit. In case you use another powercord, make sure that it is certified by the applicable national standards if not beingprovided by the supplier. If the power cable is faulty in any way, please contact themanufacturer or the nearest authorized repair service provider for a replacement.The power supply cord is used as the main disconnection device. Ensure that thesocket-outlet is easily accessible after installation.Operate the display only from a power source indicated in the specifications ofthis manual or listed on the display. If you are not sure what type of power supplyyou have in your home, consult with your dealer.Overloaded AC outlets and extension cords are dangerous. So are frayed powercords and broken plugs. They may result in a shock or fire hazard. Call your servicetechnician for replacement.Do not Open the Display:There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly.To Avoid Personal Injury :Do not place the display on a sloping shelf unless properly secured.Use only a stand recommended by the manufacturer.Do not drop an object on or apply impact to the product. Do not throw any toysor objects on the product screen. It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards:Always turn the display OFF if you leave the room for more than a short periodof time. Never leave the display ON when leaving the house.Keep children from dropping or pushing objects into the display's cabinetopenings. Some internal parts carry hazardous voltages.Do not add accessories that have not been designed for this display.When the display is to be left unattended for an extended period of time, unplugit from the wall outlet.In the presence of thunder and lightning, never touch the power cord and signalcable because it can be very dangerous. It can cause electric shock. On InstallationDo not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage.Important Precautions
Important PrecautionsNOTETHE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY NOTEThis epuipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequencycause harmful interference to radio communications.However,there is noguarantee that interference will not occur in a particular installation.If this which can be determined by turning the equipment off and on,the user isencouraged to try to correct the interference by one or more of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and the receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.energy and,if not installed and used in accordance with the instructions,may equipment does cause harmful interference to radio or television reception,TO OPERATE THE EQUIPMENT. -Consult the dealer or an experienced radio/TV technician for help.A3
A2Important PrecautionsDo not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings are blocked, built-up heatcan cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.Place the display in a built-in enclosure unless proper ventilation is provided.Cover the openings with cloth or other material.Place the display near or over a radiator or heat source.Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,mar, or damage the Active Matrix LCD permanently.Do not press the LCD screen with your finger for a long time as this may causesome afterimages.Some dot defects may appear as Red, Green or Blue spots on the screen.However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality foryour LCD display. If used under any mode except the recommended resolution,some scaled or processed images may appear on the screen. However, this ischaracteristic of the fixed-resolution LCD panel.Leaving a fixed image on the screen for a long time may cause damage to thescreen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen. On CleaningUnplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the displayscreen because over-spraying may cause electrical shock.On RepackingDo not throw away the carton and packing materials. They make an idealcontainer in which to transport the unit. When shipping the unit to anotherlocation, repack it in its original material.On DisposalThe fluorescent lamp used in this product contains a small amount of mercury.Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regulations ofyour local authority.
A3Disassembling the stand1. Place the monitor face down on the cushion or soft cloth.2. Loosen the screw which is attached to the stand base, then take off the stand basefrom stand body.Connecting the DisplayImportantThis illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot.Connecting the stand 1.Place the monitor with its front facing downward on a soft cloth.2.Assemble the stand base into stand body in the correct direction as shown inthe picture, then tighten the screw which is attached to the stand base.Stand BaseStand Body3.Once assembled take the monitor up carefully and face the front side.ScrewStand BaseStand Body Screw
A4A4Connecting the DisplayBefore setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display1. Adjust the position of the panel in various ways for maximum comfort.Tilt Range: -5˚~17˚ ErgonomicIt is recommended that in order to maintain an ergonomic and comfortable viewingposition, the forward tilt angle of the monitor should not exceed 5 degrees.
A5A5Using the Computer1. Make sure to turn off the computer and product. Connect the cable as below sketch mapform to .12Connecting the DisplayWall-outlet typeHeadphone/Earphone InputPower CordABCConnect DVI-D CableConnect D-sub Cable (PC)Connect D-sub Cable (Mac)Mac adapterFor Apple Macintosh use, a separate plug adapter is neededto change the 15 pin high density (3 row) D-sub VGAconnector on the supplied cable to a 15 pin 2 row connector.DVI-D(This feature is not available in all countries.)Signal CableNOTEThis is a simplified representation of the rear view.This rear view represents a general model; your display may differ from the view as shown.User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite coresto maintain standard compliance for the product. DVI-D
A6Connecting the Display2. Touch the power button on the front of panel to turnthe power on. When monitor power is turned on, the 'Self Image Setting Function' is executedautomatically. (Only to the D-sub signal cable input)NOTE'Self Image Setting Function'? This function provides the user with optimal display settings.When the userconnects the monitor for the first time, this function automatically adjusts the display to optimal settings forindividual input signals. 'AUTO/SET Function'?When you encounter problems such as blurry screen, blurred letters, screen flickeror tilted screen while using the device or after changing screen resolution, touch the AUTO/SET function buttonto improve resolution.Power button
A7Control FunctionControl Panel FunctionsMENU ButtonUse this button to enter or exit from the On Screen Display.FUN ButtonUse this button to enter EZ ZOOMING, 4:3 IN WIDE,PHOTO EFFECT, CINEMA MODE, TIME CONTROLitems, for more information, refer to page A15-A16.OSD LOCKED/UNLOCKEDThis function allows you to lock the current control settings, sothat these settings are not inadvertently changed. To lock theOSD settings, press and hold the MENU button for severalseconds. The message "OSD LOCKED" appears.You can unlock the OSD settings at any time bypushing the MENU button for several seconds. Themessage "OSD UNLOCKED" appears.Front Panel Controls
A8Control Panel FunctionsThis Indicator lights up as red when the display isoperating normally(On Mode). If the display is inSleep Mode (Energy Saving), this indicator colorchanges to flicker.Use this button to turn the display on or off.Operate key up to Red decoration area aroundbutton even back side.Power ButtonPower IndicatorUse this button to select an icon in the On ScreenDisplay.AUTO/SETButtonAUTO IMAGE ADJUSTMENTWhen adjusting your display settings, always pressthe AUTO/SET button prior to entering the OnScreen Display(OSD). This will automatically adjustyour display image to the ideal settings for thecurrent screen resolution size (display mode).The best display mode is: 1600 x 900ButtonsUse these buttons to select or adjust functions in the OnScreen Display.For more information, refer to page A17.Use this button to make DSUB, DVI connectoractive. This feature is used when two computers areconnected to the display. Button()Button(SOURCE)Control Function
A9On Screen Display (OSD) Control AdjustmentScreen AdjustmentMaking adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The following section is an outline of the available adjustments and selectionsyou can make using the OSD.To make adjustments in the On Screen Display, follow these steps:Press the MENU Button, then the main menu of the OSD appears.To access a control, use the or Buttons. When the icon you wantbecomes highlighted, press the AUTO/SET Button.Use the / Buttons to adjust the image to the desired level. Use theAUTO/SET Button to select other sub-menu items.Push the MENU Button once to return to the main menu to select anotherfunction. Push the MENU Button twice to exit from the OSD.NOTEAllow the display to stabilize for at least 30 minutes before making image adjustments.
A10NOTEThe order of icons may differ depending on the model (A10~A17 ).On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus.To adjust the resolutionMain menu Sub-menu A D ReferenceTo adjust screen color modePRESETOSDPOSITIONLANGUAGETo adjust the image sizeTo adjust the brightness, contrast andgamma of the screenTo customize the color of the screenTo adjust the position of the screenTo customize the screen status for auser's operating environmentTo improve the clarity and stability of thescreenTo select or customize desired imagesettingsNORMALGAUSSIAN BLURSEPIAMONOCHROMEBRIGHTNESSCONTRASTGAMMAsRGB6500K9300KREDGREENBLUEHORIZONTALVERTICALCLOCKPHASESHARPNESSHORIZONTALVERTICALWHITE BALANCERTCPOWER INDICATORFACTORY RESETMOVIEINTERNETUSERNORMALDEMOTo focus on the moving picture selectedTo mind user using time: AdjustableA : Analog InputD : Digital InputFLATRONF-ENGINESETUPTRACKINGCOLORPICTURETIME CONTROLPHOTO EFFECT4:3 IN WIDEEZ ZOOMINGCINEMA MODE
A11Sub-menusOn Screen Display(OSD) Selection and Adjustment NOTEOSD (On Screen Display) menu languages on the monitor may differ from the manual.You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu.Press the MENU Button, then the main menu of the OSD appears.Menu NameIconsMain MenuButton TipMENU : Exit: Adjust (Decrease/Increase)SET : Enter: Select another sub-menu: Restart to select sub-menu
A12On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionBRIGHTNESSCONTRAST GAMMATo adjust the brightness of the screen. To adjust the contrast of the screen.Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues display high contrast images.PICTUREPRESETREDGREENBLUE• sRGB: Set the screen color to fit theSRGB standard colorspecification.• 6500K: Slightly reddish white.• 9300K: Slightly bluish white.Set your own red color levels.Set your own green color levels.Set your own blue color levels.COLORPICTURECOLORMENU : Exit: Decrease: IncreaseSET : Select another sub-menuMENU : Exit: Decrease: IncreaseSET : Select another sub-menu
A13On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionCLOCKPHASESHARPNESSTo minimize any vertical bars orstripes visible on the screenbackground.The horizontal screen size will alsochange.To adjust the focus of the display. This item allows you to removeany horizontal noise and clear orsharpen the image of characters.To adjust the clearness of thescreen.TRACKINGTRACKINGMENU : Exit: Decrease: IncreaseSET : Select another sub-menuHORIZONTALVERTICALTo move image left and right.To move image up and down.
A14Restore all factory default settings except"LANGUAGE." Press the , buttons to reset immediately.On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionIf this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only whenthe input signal is an analog signal. SETUPTo choose the language in which thecontrol names are displayed.To adjust position of the OSD windowon the screen.LANGUAGEOSDPOSITIONWHITEBALANCEFACTORYRESETIf the output of the video card is differentthe required specifications, the colorlevel may deteriorate due to videosignal distortion. Using this function, thesignal level is adjusted to fit into thestandard output level of the video cardin order to provide the optimal image.Activate this function when white andblack colors are present in the screen.(only for DSUB input) POWERINDICATORSETUPMENU : Exit: Adjust: AdjustSET : Select another sub-menuUse this function to set the powerindicator on the front side of the monitorto ON or OFF.If you set OFF, it will go off. If you set ON at any time, the powerindicator will automatically be turned on.RTCIf you set ON, you enable the ResponseTime Control function.If you set OFF, you disable theResponse Time Control function.
A15A15On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionEZ ZOOMINGThe OSD screen will appear when you touch the FUN button on the left bottom of themonitor.EZ Zoom lowers the display’s resolution insingle-step increments. Depressing the buttononce lowers the resolution by one step; while asecond button-press returns the resolution tothe original display settings. *This function is operated only if theforteManager is installed to PC. 4:3 IN WIDE To select the image size of the screen.• WIDE : Switch to full screen mode according to input image signal. • 4 : 3 : Change the image signal ratio into 4:3. WIDE 4:3
A16On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionPHOTOEFFECT•NORMAL :The PhotoEffect function is disabled.•GAUSSIAN BLUR :This option is to add the effect to the screen thatthe dark and sharp image becomes brighter andmore blurred.•SEPIA :This option changes the screen to be Sepia tone.The Sepia tone is brown color tone.•MONOCHROME :This option changed the screen to be Gray tone.The screen image is displayed with just white,black, gray colors.To select the color of the screen.MONOCHROMENORMALGAUSSIAN BLURSEPIACINEMAMODEIt focuses better on the moving picture inselected area.*This function is operated only if thefortmanager is installed to pc.Remind user using time by showing alarm OSD andflickering power LED.Selection:OFF/1HR/2HRTIMECONTROL
A17On Screen Display(OSD) Selection and Adjustment IconsMenu NameSub-menu NameMain menu Sub menu DescriptionMOVIEINTERNETNORMALDEMOUSERThe OSD screen will appear when you touch the button on the right bottom ofthe monitor.INTERNET: For text images (Word processing etc.)MOVIE: For animation images in videos or movies This is under normal operating conditions.* Normal mode is when f-ENGINE is turned off.This is just for advertising to customer in theshops. It’s setting is same with Movie mode andscreen is divided by half.To adjust the USER sub-menufunction,press the AUTO/SET Button.This feature lets you easily select the best desiredimage condition optimized to the environment(ambient illumination, image types etc).UserYou can manually adjust ACE or RCM. You can save or restore the adjusted value even when using a different environment. ...ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.Not appliedGreen enhance Flesh toneColor Enhance0123MENU : Exit: MoveSET : SelectMENU : Exit: Decrease: IncreaseSET : Select another sub-menu
A18TroubleshootingNo image appearsCheck the following before calling for service.No image appearsDo you see a "OSD LOCKED" message on the screen?• You can secure the current control settings,so that they cannot be inadvertently changed.You can unlock the OSD controls at any timeby pushing the MENU button for severalseconds: the message “OSD UNLOCKED” will appear.●Do you see “OSDLOCKED” when youpush MENU button?●Is the power cord of thedisplay connected?●Is the power indicatorlight on?●Is the power indicatorflickering?●Do you see an "OUT OFRANGE" message onthe screen?●Do you see a "CHECKSIGNAL CABLE"message on thescreen?• Check and see if the power cord is connectedproperly to the power outlet.• Press the Power button.• If the display is in power saving mode, try movingthe mouse or pressing any key on the keyboard tobring up the screen.• Try to turn on the PC.• This message appears when the signal from thePC (video card) is out of horizontal or verticalfrequency range of the display. See the'Specifications' section of this manual andconfigure your display again.• This message appears when the signal cablebetween your PC and your display is notconnected. Check the signal cable and try again.
A19A19TroubleshootingDisplay image is incorrect●Display Position isincorrect.●On the screenbackground, verticalbars or stripes arevisible.●Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed.• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting. If the results are unsatisfactory, adjust the imageposition using the H position and V position iconin the on screen display.• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease thevertical bars or stripes using the CLOCK icon inthe on screen display.• Press the AUTO/SET button to automaticallyadjust your display image to the ideal setting.If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.• Check Control Panel --> Display --> Settingsand adjust the display to the recommendedresolution or adjust the display image to the idealsetting. Set the color setting higher than 24 bits(true color).ImportantCheck Control Panel --> Display --> Settings and see if the frequency or theresolution were changed. If yes, readjust the video card to the recommendresolution.If the recommended resolution (optimal resolution) is not selected, letters may beblurred and the screen may be dimmed, truncated or biased. Make sure to selectthe recommend resolution.The setting method can differ by computer and O/S (Operation System), andresolution mentioned above may not be supported by the video cardperformance. In this case, please ask to the computer or the video cardmanufacturer.
A20A20TroubleshootingHave you installed the display driver?●Have you installed thedisplay driver?●Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message?• Be sure to install the display driver from the displaydriver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver fromour web site: http://www.lge.com.• Make sure to check if the video card supportsPlug&Play function.Display image is incorrect●The screen color ismono or abnormal.●The screen blinks.• Check if the signal cable is properly connectedand use a screwdriver to fasten if necessary.• Make sure the video card is properly inserted inthe slot.• Set the color setting higher than 24 bits (true color)at Control Panel - Settings.• Check if the screen is set to interlace mode and ifyes, change it to the recommend resolution.• Please select factory reset menu and then check again.
A21A21A21Specifications NOTEInformation in this document is subject to change without notice.DisplaySync InputVideo InputResolutionPlug&PlayPowerConsumptionDimensions&WeightTilt RangePower InputEnvironmentalConditionsStand BaseSignal cablePower cord 20 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coatingVisible diagonal size: 50.8 cm0.2766*0.2766 mm pixel pitchHorizontal Freq. Analog : 30 - 83 kHz (Automatic)Digital : 30 - 83 kHz (Automatic)Vertical Freq. Analog,Digital: 56 - 75 Hz (Automatic)Input Form Separate TTL, Positive/NegativeSOG (Sync On Green) Digital (HDCP)Signal Input 15 pin D-Sub ConnectorDVI - D connector (Digital)Input FormRGB Analog (0.7 Vp-p/ 75 ohm), DigitalMax Analog : VESA 1600 x 900 @60 HzDigital : VESA 1600 x 900 @60 HzRecommend VESA 1600 x 900 @60 HzDDC 2B (Digital), DDC 2AB (Analog)On Mode : 42 W(Typ.)Sleep Mode ≤1 WOff Mode ≤1 WWith Stand Without StandWidth 48.85 cm / 19.23 inches 48.85 cm / 19.23 inchesHeight 36.57 cm / 14.40 inches 31.48 cm / 12.39 inchesDepth 19.32 cm / 7.61 inches 6.68 cm / 2.63 inchesNet 3.5 kg (7.93 lbs)Tilt -5˚~17˚AC 100-240V~ 50/60Hz 1.0A Operating ConditionsTemperature 10˚C to 35 ˚CHumidity 10 % to 80 % non-CondensingStorage ConditionsTemperature -20˚C to 60 ˚CHumidity 5 % to 90 % non-CondensingAttached( ), Detached ( O )Attached( ), Detached ( O )Wall-outlet type
A22SpecificationsIndicatorOn ModeSleep ModeOff ModeRedFlickerOffLED ColorMODEPreset Modes (Resolution)Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)* Recommend Mode12345678*9720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681152 x 8641600 x 90031.46831.46937.50037.87946.87548.36360.12367.50060.000706075607560757560
Digitally yours

Navigation menu