LG Electronics USA W3000S 1900MHz GSM Cellular Phone User Manual
LG Electronics USA 1900MHz GSM Cellular Phone
UserManual.wiki
>
LG Electronics USA
>
W3000S User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![ENGLISH7Accessing the MenuPhonebook ........................................................................... 25• Search [Names 1] ............................................................. 26• Add new [Names 2] ........................................................... 27• Speed dial [Names 3] ........................................................ 29• Voice list [Names 4] .......................................................... 29• Caller groups [Names 5] ................................................... 30• Copy all [Names 6] ............................................................ 31• Delete all [Names 7] .......................................................... 31• Settings [Names 8] ............................................................ 32• Information [Names 9] ....................................................... 33Menu Tree ............................................................................ 35Messages [Menu 1] ............................................................. 38• Write message [Menu 1-1] ................................................ 38• Inbox [Menu 1-2] ............................................................... 43• Outbox [Menu 1-3] .............................................................44• Info Service [Menu 1-4] ..................................................... 45• Voice messages [Menu 1-5] ............................................. 47• Namecard [Menu 1-6] ....................................................... 48• Templates [Menu 1-7] ....................................................... 48• Settings [Menu 1-8] ........................................................... 48• Check memory [Menu 1-9] ................................................ 49Call Register [Menu 2] ........................................................ 50• Missed calls [Menu 2-1] .................................................... 50• Received calls [Menu 2-2] ................................................. 50• Dialled calls [Menu 2-3] ..................................................... 50• Clear recent calls [Menu 2-4] ............................................ 51• Call charge [Menu 2-5] ...................................................... 51](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-7.png)
![ENGLISH8Profiles [Menu 3] ................................................................. 54• Vibrate only [Menu 3-1] ..................................................... 55• Quiet [Menu 3-2] ............................................................... 55• General [Menu 3-3] ........................................................... 55• Loud [Menu 3-4] ................................................................ 55• Headset [Menu 3-5] .......................................................... 55• Car [Menu 3-6] .................................................................. 56Settings [Menu 4] ................................................................ 58• Alarm clock [Menu 4-1] ..................................................... 58• Date & Time [Menu 4-2] .................................................... 59• Phone settings [Menu 4-3] ................................................ 61• Call settings [Menu 4-4] .................................................... 62• Security settings [Menu 4-5] ............................................. 64• Network settings [Menu 4-6] ............................................. 68• Restore factory settings [Menu 4-7] .................................. 69Call Divert [Menu 5] ............................................................. 70• All voice calls [Menu 5-1] .................................................. 70• If busy [Menu 5-2] ............................................................. 70• If no reply [Menu 5-3] ........................................................ 70• If unreachable [Menu 5-4] ................................................. 70• All data calls [Menu 5-5] .................................................... 71• All fax calls [Menu 5-6] ...................................................... 71• Cancel all [Menu 5-7] ........................................................ 72Scheduler [Menu 6] ............................................................. 73• Add new [Menu 6-1] .......................................................... 74• View day [Menu 6-2] ......................................................... 75• View all [Menu 6-3] ........................................................... 75• Delete passed [Menu 6-4] ................................................. 75• Delete all [Menu 6-5] ......................................................... 75](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-8.png)
![ENGLISH9Fun & Tools [Menu 7] .......................................................... 76• Game [Menu 7-1] .............................................................. 76• Unit convert [Menu 7-2] ..................................................... 77• Calculator [Menu 7-3] ........................................................ 78• World time [Menu 7-4] ....................................................... 78Internet [Menu 8] ................................................................. 79• Home [Menu 8-1] .............................................................. 79• Bookmarks [Menu 8-2] ...................................................... 79• Profiles [Menu 8-3] ............................................................ 80• Go to URL [Menu 8-4] ....................................................... 82• Cache settings [Menu 8-5] ................................................ 83• Security certifications [Menu 8-6] ...................................... 83• Reset profiles [Menu 8-7] .................................................. 83Internet On-line menu ......................................................... 84Additional FunctionsHow to Use Data and Fax call ............................................ 85• Sending Data or Fax Calls ................................................ 85• Receiving Data or Fax Calls ............................................. 85In call Menu .......................................................................... 87• 1 During a call ................................................................... 87• 2 Multiparty or Conference Calls ....................................... 89Care and Maintenance ........................................................ 92Technical Data ..................................................................... 95](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-9.png)
![OverviewENGLISH15Alphanumeric KeysThe alphabet and numerical keypad mapping relation are listed asthe following table.Key Description. , ' ? ! - & 1A B C 2 Ä À Á Â Ã Æ Ç a b c ä à á â ã ç D E F 3 È É Ë Ê d e f è é ë ê G H I 4 Î Ï Ì Í g h i î ï ì íJ K L 5 j k lM N O 6 Ö Ô Ò Ó Ø Ñ m n o ö ô ò ó ø ñ P Q R S 7 p q r sT U V 8 Ü Ù Û Ú t u v ü ù û ú W X Y Z 9 w x y z0 [Space Key]](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-15.png)
![Powering On SequenceGetting StartedENGLISH22To get started with the phone1. Press and hold key until youhear a tone.2. Depending on setting PIN Code[Menu 4-5-1], you can enter PINcode or not.3. If your phone connects to anetwork, the network name will bedisplayed shortly.To turn off the phoneIn stand by mode, press and hold key until you hear a tone.➊ ➋](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-22.png)
![ENGLISH23Access Codes Getting StartedYou can use the access codes described in this section to avoidunauthorized use of your phone. The access codes (except PUK andPUK2 codes) can be changed by using [Menu 4-5-6]. PIN code (4 to 8 digits)The PIN (Personal Identification Number) code protects your SIMcard against unauthorized use. The PIN code is usually supplied withthe SIM card. When PIN code is set Enable, your phone will requestthe PIN code every time it is switched on. On the contrary, when PINcode is set Disable, your phone connects to the network directlywithout the request PIN code.PIN2 code (4 to 8 digits)The PIN2 code, supplied with some SIM cards, is required to accesssome functions such as Advice of call charge, Fixed Dial number.These functions are only available if supported by your SIM card.PUK code (4 to 8 digits)The PUK(Personal Unblocking Key) code is required to change ablocked PIN code. The PUK code may be supplied with the SIMcard. If not, contact your local service provider for the code. If youlose the code, also contact your service provider.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-23.png)
![ENGLISH25PhonebookAccessing the MenuTo select a menu in phonebook, press[Names] in standby mode andthen scroll to a desired item.Name Description1 Search Allows you to search for a specific name,number. 2 Add new Allows you to add new names and numbers.3 Speed dial Allows you to assign up to 8(2-9) one- touchdial allocations.4 Voice list Allows you to list phone numbers whichis attached voice.5 Caller groups Allows you to show group list. 6 Copy all Allows you to copy entries from your Phonememory to SIM card or from SIM card toPhone memory.7 Delete all Allows you to erase all the data in either yourphonebook or the SIM card to the phonememory. 8 Settings Allows you to set the memory and to searchitem by Variable, name and number.9 Information Allows you to check the status of memory,SDN(Service Dial Number), and Ownnumber.Name Description](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-25.png)
![PhonebookAccessing the MenuENGLISH26Search [Names 1] (Calling from phonebook) 1. Open the phonebook first by pressing [Names] in a standbymode.2. Search by Pressing [Select] to enter.3. Depending on setting Search by, the below menu may notappear.• Name• Number4. You can find an entry by name and number.5. Select [Search]. 6. You can check the names and numbers by pressing [List].7. If you want to edit, delete, copy an entry, or to add the voice toone, select [Options]. The below menu will be displayed.• Edit : You can edit the name, number, E-mail, and faxby pressing [OK].• Delete : You can delete an entry.• Copy : You can copy a entry from SIM to phone or fromphone to SIM.• Call : You can call thru the chosen entry.• Voice : You can add the voice to the entry or changethe voice tag.• Main number : You can select the one out of mobile, home,office that you often use. The main number willbe displayed first, if you set this.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-26.png)
![Accessing the MenuENGLISH27Add new [Names 2]You can add phonebook entry by using this function. Phone memory capacity is 200 entries. SIM card memory capacitydepends on the service provider. You can also save 20 characters of name in the Phone memory, andyou can save characters in the SIM card. the number of character isSIM dependent feature.1. Open the phonebook first by pressing [Names] in standbymode.2. Scroll to highlight Add new, and press [Select] to enter.3. Select the memory you want to save: SIM or Phone.• SIM : You can add name and number for entry.a. Write a name to add.b. Press [OK], then you can input a number.c. Press [OK].d. If you want to add the voice, press [Yes].• Phone : You can add name, mobile, home, office, fax no. andE-mail address.a. Write a name to add.b. Press [OK].c. Enter the numbers following as mobile, home, office,and fax by pressing [OK]. Also you can input E-mail address.d. If you want to add the voice, press [Yes].](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-27.png)
![Accessing the MenuENGLISH29Speed dial [Names 3] You can associate any of the keys 2 to 9 with a Name list entry. Youcan call directly by pressing this key for 2-3 seconds. 1. Open the phonebook first by pressing [Names] in a standbymode.2. Scroll to Speed dial, then press [Select] to enter this menu.3. Every Speed dial will be displayed.4. If you want to add Speed dial, select <Is Empty>. Then, you cansearch the name in phonebook.5. If you select allocated name by speed dial, you can view followingthe submenus.• Change : You can change the allocation of speed dialnumber. • Undo : You can delete the allocated speed dial number.speed dialVoice list [Names 4]You can see all phone numbers which contain voice. You can alsocall directly by pressing [Send]. After selecting phone numberby using and and press [Options], you can seefollowing the submenus.• Play : You can play voice which is attached to phone number.• Change : You can change voice which is attached to phonenumber.• Delete : You can delete voice which is attached to phonenumber.• Call : You can call by selecting this menu.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-29.png)
![ENGLISH30Caller groups [Names 5]You can list up to 20 members per one group. There are 7 groupsyou can make lists to.1. Press [Names] to enter into the phonebook in standby mode.2. Scroll to Caller groups then press [Select] to enter this menu.3. Every Group list will be displayed.: Family, Friend, Colleague,VIP, etc.4. Select Group name that you want to manage by pressing[Select].5. Then submenus below will be displayed.• Add member You can add the number in Caller groups.• View member-You can view the number list in Caller groups.-You can select the member you want by pressing[Options] then you can enable the submenu such as Edit,Delete.• Group ring tone-You can set the ring tone depending on Group.• Group icon-You can set icon depending on Group.• Change name-You can change and edit the Group name.PhonebookAccessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-30.png)
![Accessing the MenuENGLISH31Copy all [Names 6]You can copy/move entries from SIM card memory to Phonememory or from Phone memory to SIM card memory.1. Open the phonebook first by pressing [Names] in standbymode.2. Scroll to Copy all, then press [Select] to enter this menu.3. Then submenus below will be displayed.• SIM to Phone : You can copy the entry from SIM Card toPhone memory. • Phone to SIM : You can copy the entry from Phone memory toSIM Card.Delete all [Names 7] You can delete all entries in SIM, Phone, and Voice. This functionrequires security code.1. Press [Names] to enter into the phonebook in standby mode.2. Scroll to Delete all, then press [Select].3. Then select a memory to erase: SIM, Phone, Voice.4. And then you will be requested to enter Security code.5. Press [OK] or, press [Back] to cancel.Note• This menu "Change name" will be displayed only when youselect "Empty".](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-31.png)
![ENGLISH32Settings [Names 8] You can set preferred memory which includes Variable, SIM orPhone and preferred search which includes Variable, Name andNumber.1. Open the phonebook first by pressing [Names] in a standbymode.2. Scroll to Settings, then Press [Select] to enter.3. Then submenus below will be displayed.• Set memory1. Scroll to highlight Set memory, then press [Select] toenter. 2. The three submenus are displayed.- Variable : If you select Variable, the phone asks youwhere to store whenever you add entries inPhonebook.- SIM : If you select SIM, the phone stores entries toSIM directly without asking you where to store.- Phone : If you select Phone, the phone stores entries toPhone directly without asking you where tostore.PhonebookAccessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-32.png)
![Accessing the MenuENGLISH33• Search by1. Scroll to highlight Search by,then press [Select] to enter.2. The three submenus are displayed. - Variable : If you select Variable, the phone asks you howto search the entries.- Name : If you select Name, the phone searches entriesby name.- Number : If you select Number, the phone searchesentries by number.Information [Names 9]SDN (Service Dial Number)Use this function to access a particular list of services provided byyour network operator (if supported by the SIM card).1. Open the phonebook first by pressing [Names] in a standbymode.2. Scroll to SDN, then Press [Select] to enter.3. The names of the available services will be shown.4. Use and to select a service. Press [Send].](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-33.png)
![ENGLISH34Check memory This feature allows you to see how many freeand in-use are in your phonebook.1. Open the phonebook first by pressing[Names] in standby mode. SelectInformation by pressing [Select].2. Scroll to Check memory, then press[Select] to enter this menu.Own number (SIM dependent)You can check your own number in SIM card.BackHandset 0/200SIM Card 0/250PhonebookAccessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-34.png)
![ENGLISH38This menu includes functions related to SMS (Short MessageService), voice mail, as well as the network’s service messages.Write message [Menu 1-1]You can write and edit text message up to 1024 characters. Also,you can check the number of characters.1. Enter the Message menu by pressing [Select].2. If you want to write a new message, select Write message in themenu.3. Input the message by using eZi text. For details, see eZi text(Page 41).4. When you finish writing your message, press [Options]. Thenfollowing option menu will be displayed.Messages [Menu 1]Accessing the MenuSelect BackMessages](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-38.png)
![ENGLISH40Add dictionaryIf you add a word you use often, you can input it by pressing a keyonce for each character.1. Enter the menu.2. Scroll to highlight Add dictionary, and then press [Select].3. Input a word, and then press [Add].List dictionaryYou can view the list you already saved words in a dictionary. 1. Enter the menu.2. Scroll to highlight List dictionary, and then press [Select].3. You can check the word list.4. If you want to delete a word, press [Delete].5. If you want to delete all words in a list, select Delete all at thebottom of the list by pressing [Select]. Messages [Menu 1]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-40.png)
![ENGLISH42Messages [Menu 1]Accessing the Menu• How to use in Numeric modeTo input a number in Numeric mode,you press a number key displayed onthe keypad. • How to use in Capital modeTo input Capital letter, you press acharacter key displayed on thekeypad.• How to use in Small modeTo input Small letter, you press acharacter key displayed on thekeypad.1024/1 123BackOptions1024/1BackOptions1024/1 abcBackOptionsNote• If you want to input a symbolic character, presskey in each mode.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-42.png)
![Accessing the MenuENGLISH43Inbox [Menu 1-2]When you receive a text message, your phone shows the symboland stores it in the incoming message lists. Scroll to the desiredmessage by using , . In addition, you can see Delete allfor deleting all incoming messages at the bottom of the list. Whilereading the message, press [Options] to access the availableoptions.DeleteThe selected message is deleted.EditYou can edit an incoming message and send or save the editedmessage. ForwardYou can forward the selected message to the other party.Get numberIf the selected message has the phone number, you can extract andsave it in a phonebook. Also, you can call by this number. ReplyYou can reply to the sender by message. Return callYou can call back to the sender who sent the messageautomatically.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-43.png)
![ENGLISH44Outbox [Menu 1-3]When you enter this menu, you can see the message(s). Scroll tothe desired message by using , and press to see themessage. And if you want to exit Outbox menu, press . And if you want to exit outbox menu, press . In addition, you cansee Delete all for deleting all outgoing messages at the bottom ofthe list. After reading message, press [Options] to access the followingsubmenus.DeleteThe selected message is deleted.EditYou can edit an outgoing message and send or save it. ForwardYou can forward the selected message to the other party. Get numberIf the selected message has the phone number, you can extract andsave it in a phonebook. Also, you can call by this number. Messages [Menu 1]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-44.png)
Cell Broadcast messages (CB Message) are text messages by thenetwork to GSM phone users. They provide general information suchas weather reports, traffic news, taxis, pharmacies, and stock prices.Each type of information has the number; therefore, you can contactservice provider. When you receive CB message, you can read itfollowing sequence:Read [Menu 1-4-1]1. When you receive CB message, it will be displayed on thescreen. You can read the message by scrolling , .2. After reading the message, press to return to the standbymode. In addition, you can save it until another message isreached. Receive CB [Menu 1-4-2]• YesIf you select this menu, your phone will receive the Cell Broadcastmessage.• NoIf you select this menu, your phone will not receive the CellBroadcast message any more.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-45.png)
![ENGLISH46Alert [Menu 1-4-3]• YesIf you select this menu, your phone will beep when Cell broadcastmessage is received.• NoIf you select this menu, your phone will not beep despite Cellbroadcast message is received.Language [Menu 1-4-4]You can select the language you want. Then your phone will receivethe cell broadcast message in the language selected by you.You can select Cell broadcast language pressing [Select]. Thelanguage list which you selected already will be displayed with checkbox.Topics(Dependent to network and subscription) [Menu 1-4-5]• Add [Menu 1-4-5-1]If you select this menu, you will add the CB message category inPhone memory.• View list [Menu 1-4-5-2]If you select this menu, you can see CB message category. If youpress [Options], you can edit and delete it.• Active list [Menu 1-4-5-3]You can select the CB message category in active list by pressing[Select].Messages [Menu 1]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-46.png)
![Accessing the MenuENGLISH47Voice messages [Menu 1-5]You can listen to your voice message(s) and get the voicemail centrenumber.Listen to voice message [Menu 1-5-1]You can call voicemail centre if you want to listen to voice message.Voice mailbox number [Menu 1-5-2]You can get the voicemail if this feature is supported by the networkservice provider. When new voicemail is arrived, the symbol will bedisplayed on the screen. Please check with your network serviceprovider for details of their service in order to configure the handsetaccordingly. 1. Press key for a long time in standby mode.2. You can check the following submenus.• Home [Menu 1-5-2-1]The number dialed on the home network to listen to voicemail.• Roam [Menu 1-5-2-2]The number dialed when other networks to listen to voicemail.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-47.png)
![ENGLISH48Namecard [Menu 1-6]It’s for editing the namecard. The items of the namecard are a name,mobile, office, and memo.• Edit : You can edit a namecard.• Delete : You can delete a namecard.Templates [Menu 1-7]It’s for editing pre-defined messages. You can see 11 pre-definedmessages in the list. You can save 6 templates before you edit.But you can change them. The others are <Empty>.• Edit : You can edit a template.• Delete : You can delete the template.Settings [Menu 1-8]Message type [Menu 1-8-1]Text, Voice, Fax, Natl. paging, X400, E-mail, ERMESUsually, the type of message is set to Text. You can convert yourtext into alternative formats, which are suitable for the device that willbe received the message. Contact your service provider for theavailability of this function.Messages [Menu 1]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-48.png)
![ENGLISH49Validity period [Menu 1-8-2]This network service allows you to set how long your text messageswill be stored at the message center while attempts are made todeliver them to you.Status report [Menu 1-8-3]If you set Yes in this menu, you can check whether your message issent successfully or not. Remaining cost [Menu 1-8-4]When a message is sent, it allows the person to whom you sent themessage to reply and charges the cost of the reply to your telephonebill.SMS centre [Menu 1-8-5]If you want to send the text message, you can get the address ofSMS center thru this menu.Check memory [Menu 1-9] If you select this menu, the phone shows an used memory and totalamount of memory. The total memory is the sum of SIM and Phonememory.Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-49.png)
![ENGLISH50Missed calls [Menu 2-1]This menu shows recent missed call number(s). You can call by thisnumber, save it or view date and time in this menu.Received calls [Menu 2-2]You can check the recent received numbers. You can call by thisnumber, save it or view date and time in this menu. Dialled calls [Menu 2-3]You can check the recent dialled numbers. You can call by thisnumber, save it or view date and time in this menu. Call Register [Menu 2]Accessing the MenuSelect Back<Press once>Call Register](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-50.png)
![Accessing the MenuENGLISH51Clear recent calls [Menu 2-4]You can delete all call records.1. Press [Menu] in standby mode.2. Press for direct access or use and to enter Callregister.3. Scroll to highlight Clear recent calls and press [Select] toenter.4. The following four submenus : Missed calls, Received calls,Dialled calls, All calls.5. Delete all message will be displayed and then press [Select],then, press one more time [Yes] to confirm.Call charge [Menu 2-5]Within these submenus, you can view the duration and the call cost. Call duration [Menu 2-5-1]This function allows you to view the duration of your Last Call, AllCalls, Incoming Calls and Outgoing Calls in hours, minutes andseconds. You can also reset the call timers.1. Press [Menu] in standby mode.2. Press for direct access or use and to enter Callregister.3. Scroll to highlight Call duration and press [Select].The following 5 submenus: Last call, All calls, Received calls,Dialled calls and Reset all.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-51.png)
![ENGLISH52Show call costs [Menu 2-5-2] This function allows you to check the cost of your last call, all calls,remaining and reset the costs. To reset the cost, you need the PIN2code.1. Press [Menu] in standby mode.2. Press for direct access or use and to enter Callregister.3. Scroll to highlight Show call costs and Press [Select] toenter. The following 4 submenus: Last call, All calls, Remaining andReset all.Cost settings [Menu 2-5-3] [SIM Dependent]• Set tariff [Menu 2-5-3-1]You can set the currency type and the unit price. Contact yourservices providers to obtain charging unit prices. To select thecurrency or unit in this menu, you need the PIN2 code. 1. Press [Menu] in standby mode.2. Press for direct access or Use and to enter Callregister.3. Scroll to highlight Cost settings and Press [Select] toenter.4. Select Set tariff.Call Register [Menu 2]Accessing the MenuNote• The actual call cost may be different depending on networkfeatures, billing, and tax.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-52.png)
![ENGLISH53• Set credit [Menu 2-5-3-2]This network service allows you to limit the costs of your calls byselected charging units. If you select Read, the number ofremaining unit is shown. If you select Change, you can changeyour charge limit. 1. Press [Menu] in a standby mode.2. Press for direct access or use and to enter Call register.3. Scroll to highlight Cost settings and press [Select] to enter.4. Select Set credit.• Auto display [Menu 2-5-3-3]This network service allows you to see automatically cost of yourlast call. If you select Yes in Auto display menu, you can see thelast cost when the call is released. 1. Press [Menu] in standby mode.2. Press for direct access or use and to enter Call register.3. Scroll to highlight Cost settings and press [Select] to enter.4. Select Auto display.Accessing the MenuNote• When all units have been used, no calls can be madeexcept emergency calls. Depending on SIM card, you needthe PIN2 code to set a call cost limit.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-53.png)
![ENGLISH54In this menu, you can adjust and customize the phone tones fordifferent events, environments and caller’s group. (e.g. When yourphone is connected to the Handsfree kit, it'll be automatically set tothe Car profiles menu and when your phone is connected to theEarmic, it'll be automatically set to Headset profiles menu.)1. Press [Menu] in standby mode.2. Press for direct access or use and to enterProfiles.Profiles [Menu 3]Accessing the MenuNote• In case that your phone is connected to Accessories suchas Earmic and Handsfree, you cannot enable Profiles menumanually.• Profiles menu has “Enable” submenu except Headset andCar so that you can set Profiles menu at any time exceptabove case.Select Back<Press twice>Profiles](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-54.png)
![Accessing the MenuENGLISH55Vibrate only [Menu 3-1]• Enable : You can adjust the Profiles as Vibration if you needvibration mode.Quiet [Menu 3-2]• Enable : You can adjust the Profiles as Quiet if you are in Silentplace. • Change : You can change the values of Profiles submenus.General [Menu 3-3]• Enable : You can adjust the Profiles as General• Change : You can change the values of Profiles submenus. Loud [Menu 3-4]• Enable : You can adjust the Profiles as Loud if you are in a noisyenvironment.• Change : You can change the values of Profiles submenus.Headset [Menu 3-5]• Enable : You can adjust the Profiles as Headset when you put ona headset.• Change : You can change the values of Profiles submenus.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-55.png)
![Profiles [Menu 4]Accessing the MenuENGLISH56Profiles [Menu 3]Accessing the MenuCar [Menu 3-6]• Enable : You can adjust the Profiles as Car when you activateHandsfree Kit.• Change : You can change the values of Profiles submenus.A Group of Profiles submenus [Menu 3-x-x]Profiles menu have the submenus as shown below.Incoming alert type [Menu 3-x-1]Allows to set alert type for the incoming call for adjustingenvironment.Ringing tone [Menu 3-x-2]Allows to set the ringing tone for adjusting environment.Ringing volume [Menu 3-x-3]Allows to set the ringing volume for adjusting environment. Message alert [Menu 3-x-4]Allows to alert when receiving a message for adjusting environment.:Beep, Vibrator, and No alert.Key volume [Menu 3-x-5]Allows to set the keypad volume for adjusting environment.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-56.png)
![ENGLISH57Automatic answer [Menu 3-x-6] Allows to set to answer automatically for adjusting environment.Please note that only Car and Headset has this sub menu so thatyou can activate this function.• DisableEven though your phone is ringing, your phone will not answerautomatically.• After 5 secAfter 5 seconds your phone will answer automatically.• After 10 secAfter 10 seconds your phone will answer automatically.Accessing the MenuNote• If you set the Handsfree kit to the phone, you can’t activatethe vibration related with Incoming alert type or Message alertmenu. Therefore, in Car menu, you can view the followingsubmenus;- Incoming alert : Ring, Silent- Message alert : Beep, No alert](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-57.png)
![ENGLISH58You can set the following menus for your convenience andpreferences.1. Press [Menu] in standby mode.2. Press for direct access to enter Setting.Alarm clock [Menu 4-1]You can set the phone to alarm at a specified within this menu. Enable [Menu 4-1-1]You can set the time (Hour and Minute) for raising the alarm.1. Enter the menu.2. Select Enable by pressing [Select], and then enter the alarmtime you want.3. Press [OK].4. Select the repeat period: Once, Daily, Weekly, and Monthly. 5. If you set in Power off alarm, the alarm signal sounds at the timeyou set even if the phone is turned off.Settings [Menu 4]Accessing the MenuSelect Back<Press threetimes>Settings](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-58.png)
![ENGLISH59Disable [Menu 4-1-2]You can cancel setting the alarm time.1. Enter the menu.2. Select Disable by pressing [Select].3. Clear alarm message will be displayed when the phone is set toalarm before.4. If you want to cancel, press [Yes]. If not, press [No]. Date & Time [Menu 4-2]Date [Menu 4-2-1]• Set dateIn this menu, you can set the date of your phone.1. Enter the menu.2. Select Set date by pressing [Select].3. Enter the number you want to set the date.4. Press [OK].• Date formatYou can set the Date format in this menu. Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-59.png)
![ENGLISH60Time [Menu 4-2-2]The phone has its own clock. In this menu you can set the time andselect between the 12-hour or 24-hour time formats. 1. Enter the menu.2. Scroll to highlight Time by pressing [Select].• Set time: You can set time of your phone in this menu. 1. Select Set time by pressing [Select].2. Enter the number you want to set the time.3. Select the am/pm you want to set the time format by longpressing , key.4. Press [OK].• Time format: Your can select time format between 12-hour or 24-hour.1. Scroll to highlight Time format by pressing [Select].2. Select 12 hour or 24 hour you want by pressing [Select].Settings [Menu 4]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-60.png)
![Accessing the MenuENGLISH61Phone settings [Menu 4-3]You can set the phone setting you want. Scroll to highlight Phonesettings menu, and then press [Select]. Display [Menu 4-3-1]• Screen saver [Menu 4-3-1-1]If you don't activate any function for 20 seconds, the picture will bedisplayed in a standby mode. • Welcome note [Menu 4-3-1-2]This menu allows you to set the message, which is shown brieflywhen the phone is switched on. 1. Select Settings - Phone settings - Display - Welcome note.2. Your own text can be displayed. If you select this item, yourphone asks you to edit the message.• Backlight [Menu 4-3-1-3]You can set the light-up duration you want whenever you press akey.• LCD contrast [Menu 4-3-1-4]You can set the brightness of LCD you want by pressing ,.Language [Menu 4-3-2]You can select the language that will be displayed on the phone.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-61.png)
![ENGLISH62Call settings [Menu 4-4]You can set the menu relevant to a call by pressing [Select] inSetting menu.Minute minder [Menu 4-4-1] If you select Yes, you can check the call duration by beep soundevery minute during a call.Any key answer [Menu 4-4-2]• Yes [Menu 4-4-2-1]If you select this menu, you can receive an incoming call bypressing any key except key and key.• No [Menu 4-4-2-2]If you select this menu, you can receive an incoming call by[Answer] or .Send number [Menu 4-4-3](network and subscription dependent)• Yes [Menu 4-4-3-1]If you select this, you can send your phone number to the otherparty. That is, your phone number will be displayed on receiver’sphone. • No [Menu 4-4-3-2]If you select this, you can’t send your phone number.• Default [Menu 4-4-3-3]If you select this menu, this phone will be set to the default value.Settings [Menu 4]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-62.png)
If this service is available, you can accept a waiting (incoming) call.• Enable [Menu 4-4-4-1]Activating the corresponding service.• Disable [Menu 4-4-4-2]Deactivating the corresponding service.• Check status [Menu 4-4-4-3]Checking the Status of the service.Auto redial [Menu 4-4-5]• Yes [Menu 4-4-5-1]When this function is set on, your phone will make up to 10attempts for a call after not connecting.• No [Menu 4-4-5-2]Your phone will not make any attempts to connect the call after notconnecting.Next incoming [Menu 4-4-6](network dependent) In case of Single Numbering Service, you can use the phone and aconnected PC to send and receive fax, data, and voice. If you selectthe mode, you can receive data, fax, or voice each mode. Once youenter this menu, you following options are displayed.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-63.png)
![ENGLISH64• VoiceYou can receive the voice call.• DataYou can receive the data call.• FaxYou can receive the fax call.Security settings [Menu 4-5] PIN code [Menu 4-5-1]In this menu, you can set the phone to ask for the PIN code of yourSIM card when the pone is switched on. If this function is activated,you’ll be requested to enter the PIN code.1. Press [Menu] in standby mode.2. Press key for direct access or use and to enterSettings.3. Scroll to highlight Security settings menu.4. Select PIN code by pressing [Select].5. You can view the following submenus. • Enable : Enable PIN code request.• Disable : Disable PIN code request.Settings [Menu 4]Accessing the MenuNote• Single numbering service means that the number of fax ordata service is identical with the number of voice service.And, these modes depend on network feature.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-64.png)
![Accessing the MenuENGLISH65Phone lock [Menu 4-5-2]You can use security code to avoid unauthorized use of your phone.When you switch on your phone, Your phone will request securitycode always if you set phone lock to "Enable". if you set phone lockto "Automatic". Your phone will request security code only when youchange your SIM card.• Enable • Disable • Automatic Automatic key lock [Menu 4-5-3]When you enable Automatic key lock, keypad will be lockautomatically on a idle screen after 25 seconds without any keyrequesting.• Enable • Disable Note• If you want to lock your phone keypad manually, enter Topmenu and press key. • If you want to unlock your phone keypad, press [unlock] keyand then press key. But if you enabled Automatic keylock before, your phone keypad will be unlock and then after25 seconds the keypad will be lock up again automatically.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-65.png)
![ENGLISH66Settings [Menu 4]Accessing the MenuCall barring [Menu 4-5-4]The Call barring service prevents your phone from making orreceiving certain category of calls. This function requires the callbarring password. You can view the following submenus. • All outgoing: The barring service of all outgoing calls.• Outgoing Intl:The barring service of all outgoing international calls.• Outg. intl roam: The barring service of all international outgoing calls except homenetwork.• All incoming: The barring service of all incoming calls• Inc when roam: The barring service of all incoming calls when roaming• Cancel all: You can cancel all barring service.• Change passwd: You can change the password for Call Barring Service.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-66.png)
![Accessing the MenuENGLISH67Fixed dial num. [Menu 4-5-5] (SIM dependent)You can restrict your outgoing calls to selected phone number. Thenumbers are protected by your PIN2 code.1. Press [Menu] in standby mode.2. Press key for direct access or use and to enterSettings.3. Scroll to highlight Security settings menu.4. Select PIN code by pressing [Select].5. If the PIN 2 code is correct, you can view the following submenus.• On : You can restrict your outgoing calls to selectedphone number.• Off : you can call without restricting phone number. • Number list : You can view the number list saved as Fixeddial number.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-67.png)
![ENGLISH68Settings [Menu 4]Accessing the MenuChange code [Menu 4-5-6]You can change the access codes: PIN code, PIN 2 code andSecurity code.1. Press [Menu] in standby mode.2. Press key for direct access or use and to enterSettings.3. Scroll to highlight Security settings menu.4. Select Change code by pressing [Select].5. If you want to change the PIN/PIN2/Security code, input youroriginal code, and then press [OK].6. Input new PIN/PIN2/Security code, and verify the them.Network settings [Menu 4-6]You can select the network which you will be registered eitherautomatically or manually. Usually, the selection of the network usedby the handset is automatic. Automatic [Menu 4-6-1]The phone automatically selects network which is available in theyour area.Manual [Menu 4-6-2]The phone will find the list of available networks and show you them.Then you can select the network which you want to use if thisnetwork has a roaming agreement with your home network operator.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-68.png)
![Accessing the MenuENGLISH69Preferred [Menu 4-6-3]You can set a list of preferred networks the handset should attemptto register with first, before attempting to register to any othernetworks. This list is created from the handset’s predefined list ofknown networks. User define [Menu 4-6-4]You can add entries or delete new ones from the network list. Thiscan even include new networks whose network codes are not knownto the handset. To do this, select and then enter the network code,country code and network name.Restore factory settings [Menu 4-7]You can set the handset to the default configuration by selecting theSettings/Restore factory settings option, and then confirming thisselection.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-69.png)
![ENGLISH70Call Divert [Menu 5]Accessing the Menu(network and subscription dependent)The Call divert service allows to divert incoming voice calls, fax calls,and data calls to another number. For details, contact your serviceprovider.1. Press [Menu] in standby mode.2. Press for direct access or use and to enter Call Divert.All voice calls [Menu 5-1]Diverts voice calls unconditionally. If busy [Menu 5-2]Diverts voice calls when the phone is in progress.If no reply [Menu 5-3]Diverts voice calls which you do not answer.If unreachable [Menu 5-4]Diverts voice calls when the phone is switched off or out of range.Select Back<Press fourtimes>Call Divert](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-70.png)
![ENGLISH71Accessing the MenuAll data calls [Menu 5-5]Diverts to a number with a PC connection unconditionally. All fax calls [Menu 5-6] Diverts to a number with a fax connection unconditionally.The submenus [Menu 5-x-x]Call Divert menus have the submenus as shown below.Enable [Menu 5-x-1]Activating the corresponding service.• Voicemail box [Menu 5-x-x-1]Forwards to message center. This function is not included in Alldata calls and All fax calls menus.• Other number [Menu 5-x-x-2]Inputs the number for diverting.• Favorite [Menu 5-x-x-3]Shows the list of 5 diverting numbers. Note• You can select the number you want in Favorite menu.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-71.png)
![ENGLISH72Call Divert [Menu 5]Accessing the Menu(network and subscription dependent)Disable [Menu 5-x-2] Deactivating the corresponding service.Check status [Menu 5-x-3] Checking the Status of the corresponding service.Cancel all [Menu 5-7]Cancels all call divert service.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-72.png)
![ENGLISH73When you enter this menu a Calendar will show up. On top of thescreen there are sections for date and icons. Whenever you changethe date, the calendar will be updated according to the date. Andsquare cursor will be used to locate the certain day. If you see underbar on the calendar, it means that there is a schedule that day. Thisfunction helps to remind you of your schedule and memo. The phonewill sound an alarm tone if you set alarm for the note.For changing the day, month, and year.YearlyMonthlyIf you press these keys shortly, you can set thealarm daily. In case of pressing for a long time, you can set it weekly. Key DescriptionSelect Back<Press fivetimes>SchedulerScheduler [Menu 6]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-73.png)
![ENGLISH74Add new [Menu 6-1]You can edit maximum 30 characters. You can take a note. You canchoose the following types of note. You can make up to maximum 20notes. Schedule [Menu 6-1-1]Input the subject, the schedule time, the repeat time, alarm time bypressing [Select].• Repeat [Menu 6-1-1-1]- Once : no repeat.- Daily : repeat schedule daily for 5 days.- Weekly : repeat schedule weekly for 5 weeks.- Monthly : repeat schedule monthly for 5 months.- Yearly : repeat schedule yearly for 5 years.• Alarm time [Menu 6-1-1-1-1]- On time : alarm on time you set already.- 10 min before : alarm before 10 minutes from the schedule youset already.- 30 min before : alarm before 30 minutes from the schedule youset already.- 1 hour before : alarm before 1 hour from the schedule you setalready.- 1 day before : alarm before 1 day from the schedule you setalready.Scheduler [Menu 6]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-74.png)
![Accessing the MenuENGLISH75Memo [Menu 6-1-2]1. Select Add new by pressing [Select].2. Scroll to highlight Memo.3. Press [Select].4. Input the memo and then press [Select].View day [Menu 6-2]Shows the note for the chosen day. Use , to browsethrough the note lists. If you set alarm for the note, Alarm watch isdisplayed. Press [Options] to delete, edit the note you selected. View all [Menu 6-3]Shows the notes that are set for all days. Use , to browsethrough the note lists. Pressing [Options] allows access to thesame menu as in 'View day'.Delete passed [Menu 6-4]You can delete for the last schedule already is notified you.Delete all [Menu 6-5]You can delete for the all note(s).](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-75.png)
![ENGLISH76Fun & Tools [Menu 7]Accessing the MenuGame [Menu 7-1]Your phone offers you enjoyable games to play with.NoteThe Control keys are different for each game. But each gamehas screens to explain the main control key. Other commoncontrol keys are below. [Common Key Function]• [Soft 1 Key] : Start Game• [CLR] : Pause• [Soft 2 Key] : Back• [END] : Exit• [Star Key] : Backlight• [Soft 1 Key] : Save score• , , ~ : Level control[Up/Down, numeric key] Select Back<Press sixtimes>Fun & Tools](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-76.png)
![ENGLISH77Accessing the MenuUnit convert [Menu 7-2]This converts any measurement into a unityou want. There are 4 types that can beconverted into units: Length, Area, Weight,and Volume.1. You can select one of four unit types bypressing [Select] key.2. Select the unit you want to convert by pressing and . 3. You can change unit by pressing [Change] key.4. You can input the prime number after the decimal place bypressing key.5. You can delete the number you want by pressing .6. Press key or [Back] key if you want to end the processfor converting the value.0.00 cm0.000 cmChangeBack](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-77.png)
![Calculator [Menu 7-3]This contains the standard functions such as +, -, *, ÷: Add,Subtract, Multiply, Divide. 1. Input the numbers by pressing numeric keys.2. Press [Options] to select menu you want such as Add,Subtract, Multiply, Divide, Negative, Decimal point, Equals.3. You can view the result by pressing [Options] key and selectequals.4. If you want to continue the calculation, repeat the process.5. You can delete the number or sign you want by pressing .6. Press key if you want to end the calculation process.World time [Menu 7-4]You can view the time for each city around the world.when you press , shortly, you can view the city belonged tothe different time zone and when you press , long, you canview the all of city on the same time zone. If you want to select the country you want, press [set] key.ENGLISH78Fun & Tools [Menu 7]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-78.png)
![ENGLISH79Internet [Menu 8]Accessing the MenuSelect Back<Press seventimes>InternetYour phone supports services based on Wireless ApplicationProtocol(WAP). You can access services supported by your network.The services menu allows you to get the information such as news,weather reports, and flight times.Home [Menu 8-1]You can connect to the configured homepage of the activated profile.Bookmarks [Menu 8-2]When you enter this menu, you can see the bookmarks. Then pressbutton to access available option, or press to exit it.• Connect : Connect to selected bookmark.• Add new : Add a new bookmark manually.• Edit : Edit the title and the address of the selected bookmark.• Delete : Delete the selected bookmark from the bookmark list.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-79.png)
![ENGLISH80Profiles [Menu 8-3]You can make up to 5 profiles and activate only one of them. Scrollto the desired profile and press to access available options.• Activate [Menu 8-3-1-1]You can activate the selected profile.• Settings [Menu 8-3-1-2]You can edit and change WAP settings of the selected profile.- Homepage [Menu 8-3-1-2-1] This setting allows you to enter the address (URL) of the site youwant to use as homepage. You do not need to type “"http://" infront of each URL as the WAP Browser will automatically add it.- Display image [Menu 8-3-1-2-2] You can select whether images on WAP cards are displayed ornot. - Conn. type [Menu 8-3-1-2-3] The options for connection type are Continuous or Temporaryand depend on the gateway.Continuous [Menu 8-3-1-2-3-1] A confirmed delivery mechanism but generates more networktraffic.Temporary [Menu 8-3-1-2-3-2]A non-confirmed (connectionless) service. Internet [Menu 8]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-80.png)
![Accessing the MenuENGLISH81- Secure setting [Menu 8-3-1-2-4]The options are On and Off depend on the gateway you areusing.- Gateway info. [Menu 8-3-1-2-5]Most of WAP gateways do not require a User ID and Password. If your gateway need them to connect to it, then your networkshould provide them, and you must set them up correctly beforetrying to browse a WAP site.- Data setting [Menu 8-3-1-2-6]These values of setting are provided by your network.IP address : Enter the IP address of the WAP gateway you areusing to access.Dial number : Enter the telephone number to dial to access yourWAP gateway.Call type : Select the type of data call.: Analogue or ISDN(Digital).Call speed : The speed of your data connection.User ID : The user identity for your dial-up server (and NOTthe WAP gateway). Password : The password required by your dial-up server(and NOT the WAP gateway) to identify you. - Linger time [Menu 8-3-1-2-7] You need to select one of 5 timeout periods. After selecting oneof them, the service will be unavailable if any data wasn't input ortransferred.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-81.png)
![ENGLISH82• Rename [Menu 8-3-1-3]Edit the Profile Name.• E-mail server [Menu 8-3-1-4]Save the URL of the E-mail server that you frequently use.- Connect [Menu 8-3-1-4-1]Connect to the E-mail server that you configured.- Edit address [Menu 8-3-1-4-2]Edit the URL of the E-mail server. Go to URL [Menu 8-4]You can directly connect to the site that you want. You need to enterthe specific URL that you want to directly connect.Internet [Menu 8]Accessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-82.png)
![Accessing the MenuENGLISH83Cache settings [Menu 8-5]You can remove the contents of Cache memory and change theCache check mode.Clear cache [Menu 8-5-1]The contents of Cache memory will be removed.Cache check [Menu 8-5-2]You can change the time for checking the Cache memory.• Always [Menu 8-5-2-1]The cache is always checked whenever URL is loaded ornavigated.• Start only [Menu 8-5-2-2]The cache is only checked when the WAP is started.• Off [Menu 8-5-2-3]The cache is never checked.Security certifications [Menu 8-6]A list of the available certificates is shown.Reset profiles [Menu 8-7]You can reset all the current settings of profiles to the factory default.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-83.png)
![ENGLISH84If you are on line, you can see the following menus.❏ HomeThis is the same as [Menu 8-1].❏ ReloadThis reloads the current page.❏ BookmarksThis is the same as [Menu 8-2].❏ Save as bookmarksSave the current URL as a bookmark. You can also edit thebookmark title.❏ Go to URLSame as [Menu 8-4].❏ Go to e-mail serverConnect to the E-mail server that you configured.❏ Set as e-mail serverSave the current URL as an E-mail server.Internet On-line menuAccessing the Menu](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-84.png)
![ENGLISH85To be able to data or fax service, you need the communicatesoftware such as a data or a fax program. Before using thesefunctions, you need to connect your phone to a computer or makesure that your phone is in connection with a compatible device.Sending Data or Fax Calls1. Connect your computer to the phone.2. After starting the communicate software, make a call and transmita data or fax.3. After the data or fax transmission, you can end the call by justending of the communicate software, pressing [End] .Receiving Data or Fax CallsIf you have separate numbers for voice, data and fax calls, yourphone recognizes the type of call.Receiving Data or Fax Calls – Separate numbers(Multi-numbers)To use a data or a fax service, the display shows which type of callyou are receiving.To receive a data or fax call1. Connect your computer to the phone.2. After starting the communicate software, accept a call and receivea data or fax (if it is not answered automatically).3. After the data or fax reception, you can end the call by just endingof the communicate software, pressing [End].How to Use Data and Fax callAdditional Functions](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-85.png)
![ENGLISH86Receiving Data or Fax Calls – Single numberIf you have a SIM card that does not support separate voice, dataand fax numbers, the phone does not recognize the type of incomingcall.To use a data or a fax service, make sure that you want to receive adata or fax call mode. You first have to set the phone to one of theseoptions in the call mode (Settings ➝ Call Setting ➝ Next Incoming)sub menu.To receive a data or fax call1. Press [Menu] in standby mode.2. Select the Settings ➝ Call setting ➝ Next Incoming.3. Select the call type you want (Voice, Data or Fax) and press [Select].4. Connect your computer to the phone.5. After starting the communicate software, accept a call and receivea data or fax (if it is not answered automatically).6. After the data or fax reception, you can end the call by just endingof the communicate software, pressing [End].Once you have set your phone for a specific incoming call, it remainsset until you change it.How to Use Data and Fax callAdditional Functions](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-86.png)
![ENGLISH87In call Menu Additional FunctionsDuring a call, the following menus will be displayed, not in a standbymode.1 During a call1-1 Putting a Call on HoldYou can place a call on hold or retrieve by just pressing the[Send] key. When a call is made or answered, press the [Send]key to place it on hold. When a call is held, press the [Send] keyto make it active.1-2 Making a Second CallYou can get a dial number from phonebook to make a second call.Press [Names] key then select Search. To save the dial numberinto phonebook during call, press [Names] key then select Addnew.1-3 Swapping Between Two CallsTo switch between two calls, select the [Options] key, then selectSwap or just press [Send] key.You can make one of two calls focused by pressing up/down arrowkey. If you want to end one of two calls, make the call you want toend focused, then press [End] key when the call you want toend is focused.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-87.png)
![ENGLISH88In call Menu Additional Functions1-4 Answering an Incoming CallTo answer an incoming call, simply press the [Send] key.The handset is also able to warn you of an incoming call while youare already in a call. A tone sounds in the earpiece, and the displaywill show that a second call is waiting. If Call Waiting is on, you can put the first call on hold and answer thesecond, by pressing [Send] or by selecting the [Answer]key, then Hold & Answer.You can end the current call and answer the waiting call by selectingthe [Menu] key, then End & Answer.1-5 Rejecting an Incoming CallYou can reject an incoming call without answering by simplypressing the [End] key.When in a call you can reject an incoming call by pressing the[Menu] key and selecting Multiparty/Reject or by pressing[End] key.1-6 Controlling the volume during a callYou can control the volume during a call by pressing [Options]key and selecting Volume.1-7 Muting the MicrophoneYou can mute the microphone during a call by pressing the[Options] key then selecting Mute. The handset can be unmuted bypressing the [Unmute] .When the handset is muted, the caller cannot hear you, but you canstill hear them.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-88.png)
![Additional FunctionsENGLISH891-8 Switching DTMF Tones on During a CallTo turn DTMF tones on during a call, for example, to allow yourhandset to make use of an automated switchboard, select the [Options] key, then DTMF On. DTMF tones can be turned off thesame way.1-9 Calling up the Main MenuThe Messages and SIM Tool kit main menu options can be reachedfrom the in-call menu by selecting the [Options] key, then MainMenu. SIM Tool kit menu is shown only when SIM in the handsetsupports SIM Tool kit service.2 Multiparty or Conference CallsThe multiparty or conference service provides you with the ability tohave a simultaneous conversation with more than one caller, if yournetwork service provider supports this feature.A multiparty call can only be set up when you have one active calland one call on hold, both calls having been answered. Once amultiparty call is set up, calls may be added, disconnected orseparated (that is, removed from the multiparty call but stillconnected to you) by the person who set up the multiparty call.These options are all available from the in-call menu and are listed inSection.The maximum callers in a multiparty call is five. Once started, youare in control of the multiparty call, and only you can add calls to themultiparty call.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-89.png)
![ENGLISH90In call Menu Additional Functions2-1 Making a Second CallYou can make a second call while you are already in a call. To dothis, enter the second number and press [Send]. When you getsecond call the first call is automatically put on hold. You can swapbetween calls by selecting the [Options] key then Swap.2-2 Setting up a Multiparty CallYou can connect a call on hold to the currently active call to form amultiparty call by selecting the [Options] key thenMultiparty/Join all.2-3 Putting the Multiparty Call on HoldTo put a multiparty call on hold, select the [Options] key thenMultiparty/Hold all.2-4 Activate the Multiparty Call on HoldTo make a multiparty call on hold active, select the [Options] keythen Multiparty/Join all.2-5 Adding Calls to the Multiparty CallTo join an active call to the held multiparty call, select the[Options] key then Multiparty/Join all.2-6 Displaying Callers in a Multiparty CallTo scroll through the numbers of the callers who make up amultiparty call on the handset screen, press and keys.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-90.png)
![ENGLISH91Additional Functions2-7 Putting a Member of a Multiparty Call on HoldTo place one selected caller (whose number is currently displayedon-screen) of a multiparty call on hold, select the [Options] keythen Multiparty/Exclude.2-8 A Private Call in a Multiparty CallTo have a private call with one caller of a multiparty call, display thenumber of the caller you wish to talk to on the screen, then select the [Options] key and Multiparty/Private to put all the other callerson hold.2-9 Ending a Multiparty CallThe currently displayed caller of a multiparty call can bedisconnected by pressing the [End] key. To end a multiparty call,press the [Options] key then select Multiparty/End multiparty.Selecting the [Options] key then Multiparty/End all, will end allthe active and held calls.2-10 Explicit Call Transfer (ECT)If you have one caller on hold and another active call, you mayconnect one call party to another call party and then leave the call.This is done by selecting the Multiparty/Transfer option from the in-call menu.](https://usermanual.wiki/LG-Electronics-USA/W3000S/User-Guide-324042-Page-91.png)
