LG Electronics USA Z32LC6DUM LCD TV User Manual Zenith
LG Electronics USA LCD TV Zenith
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
Users Manual 2
Zenith.book Page 39 Wednesday, April 2, 2008 11:46 AM KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. or button Press the button and then use select Key Lock. or button to Press the button and then use select On or Off. or button to Language : English Input Label Key Lock : Off Caption : Off Set ID :1 Language Input Label Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Key Lock Off Caption On WATCHING TV / CHANNEL CONTROL Press the MENU button and then use to select the OPTION menu. Set ID 39 Zenith.book Page 40 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio. ! NOTE If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watching video that did not fill the screen, any afterimage from the black bars will normally dissipate after a few minutes. Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the PICTURE menu. PICTURE CONTROL Set by program Selects the proper picture proportion to match the source’s image. (4:3 4:3) (16:9 16:9) Zoom 1 Zoom 2 Set by program Set by program 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. Zoom 2 4:3 Just Scan 16:9 Adjust the picture horizontally, in a linear pro-portion to fill the entire screen. 16:9 Set By Program Following selection will lead you to view the picture of best quality without loss of original picture in high resolution image. Notes: If there are noise in original picture, you can see the noise at the edge. Just Scan operates only in DTV/CADTV (720p/1080i/1080p), HDMI-DTV, DVI-DTV input source. Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. 40 Just Scan Zenith.book Page 41 Wednesday, April 2, 2008 11:46 AM PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor. Dynamic, Standard, Mild Settings are preset for the optimum picture quality at the factory and are not adjustable. In the User1 and User2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint, backlight. PICTURE CONTROL Press the PICTURE button repeatedly to select the picture appearance setup option as below : Dynamic, Standard, Mild, User1 (your own settings), and User2 (your own settings). Press the RETURN button to save and return to TV viewing. You can also use the PICTURE menu to adjust Picture Mode. Picture Mode : User1 Picture Mode Dynamic Color Temperature : Cool Color Temperature Standard DB DB Mild Advanced Advanced User1 Aspect Ratio User2 Aspect Ratio : 16:9 Picture Reset Picture Reset Screen Screen 41 Zenith.book Page 42 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL Color Tone - Preset Choose one of three automatic color adjustments. Set to Warm to enhance hotter colors such as red, or set to Cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), Color Temperature is automatically changed. When selecting Picture Mode options (User1 and User2), you can choose the Color Temperature. PICTURE CONTROL Press the MENU button and then use to select the PICTURE menu. or button Picture Mode : User1 Color Temperature : Cool DB Advanced Aspect Ratio Press the button and then use select Color Temperature. or button to Press the button and then use or button to select either Cool, Medium, Warm or User. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Screen Picture Mode Color Temperature Cool DB Medium Advanced Warm Aspect Ratio User Picture Reset Screen 42 : 16:9 Picture Reset Zenith.book Page 43 Wednesday, April 2, 2008 11:46 AM MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. or button Picture Mode : User1 Color Temperature : Cool DB Advanced Aspect Ratio Press the button and then use select Picture Mode. or button to Press the button and then use select User1 or User2. or button to Press the button and then use or button to select the desired picture option (Contrast, Brightness, Color, Sharpness, Tint, or Back Light). Back Light To control the brightness of the screen, adjust the brightness of LCD panel. Press the button and then use make appropriate adjustments. or button to Screen Picture Mode Dynamic Color Temperature Standard DB Mild Advanced User1 Aspect Ratio User2 Picture Reset Screen Selection (X or ) leads you to the detailed setting screen. User1 Contrast 85 Brightness 50 Color 50 Sharpness 50 Tint Back Light Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. : 16:9 Picture Reset PICTURE CONTROL Press the MENU button and then use to select the PICTURE menu. 100 Press MENU to confirm. Contrast 85 43 Zenith.book Page 44 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL Color Tone - User Mode You can also adjust the detailed settings (Red, Green, Blue) by selecting the Color Temperature-User menu. When selecting Picture Mode options (User1 and User2), you can choose the Color Temperature. PICTURE CONTROL Press the MENU button and then use to select the PICTURE menu. or button Picture Mode : User1 Color Temperature : Cool DB Advanced Aspect Ratio Press the button and then use select Color Temperature. or button to Press the button and then use select User. or button to Press the button and then use select Red, Green, or Blue. or button to : 16:9 Picture Reset Screen Picture Mode Color Temperature Cool DB Medium Advanced Warm Aspect Ratio User Picture Reset Screen Selection (X or ) leads you to the detailed setting screen. Press the button and then use appropriate adjustments. or button to make The adjustment range of Red, Green, or Blue is -20~ +20. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. User Red Green Blue Press Red 44 MENU to confirm. Zenith.book Page 45 Wednesday, April 2, 2008 11:46 AM DB - PICTURE IMPROVEMENT TECHNOLOGY DB is Zenith’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard, and Mild), DB is automatically changed to Auto. When selecting Picture Mode options (User1 and User2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the DB Contrast, DB Color and DB Noise. It’s not available to use this function in RGB-PC input source. or button Picture Mode : User1 Color Temperature : Cool PICTURE CONTROL Press the MENU button and then use to select the PICTURE menu. DB Advanced Aspect Ratio Press the select DB. button and then use or button to Press the button and then use select either Auto or Manual. or button to : 16:9 Picture Reset Screen Picture Mode Selecting the Manual 1. Press the button and then use or button to select DB Contrast, DB Color or DB Noise. DB Contrast: Optimizing the contrast automatically according to the brightness of the reflection. DB Color: Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors. DB Noise: Removing the noise up to the point where it does not damage the original picture. 2. Use the or Color Temperature DB Manual Advanced Aspect Ratio DB Contrast On Picture Reset DB Color On Screen DB Noise On button to select On or Off. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 45 Zenith.book Page 46 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL ADVANCED - CINEMA 3:2 PULL DOWN MODE Set up the TV for the best picture appearance for viewing movies. When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. PICTURE CONTROL Press the MENU button and then use to select the PICTURE menu. or button Picture Mode : User1 Color Temperature : Cool DB Advanced Aspect Ratio Press the button and then use select Advanced. or button to Press the button and then use select Cinema 3:2 Mode. or button to : 16:9 Picture Reset Screen Picture Mode Color Temperature Use or button to select On or Off. DB Advanced Cinema 3:2 Mode Off Aspect Ratio Black Level Picture Reset Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 46 Screen Low Zenith.book Page 47 Wednesday, April 2, 2008 11:46 AM ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV 1, AV 2, HDMI1, or HDMI2 mode. or button Picture Mode : User1 Color Temperature : Cool PICTURE CONTROL Press the MENU button and then use to select the PICTURE menu. DB Advanced Aspect Ratio Press the button and then use select Advanced. or button to Press the button and then use select Black Level. or button to : 16:9 Picture Reset Screen Picture Mode Color Temperature Use or button to select Low or High. Low The screen gets darker. High The screen gets brighter. DB Advanced Cinema 3:2 Mode Off Aspect Ratio Black Level Low Picture Reset Screen Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 47 Zenith.book Page 48 Wednesday, April 2, 2008 11:46 AM PICTURE CONTROL PICTURE RESET Use to quickly reset all the Picture menu options to their original factory preset values. PICTURE CONTROL Press the MENU button and then use to select the PICTURE menu. or button Picture Mode : User1 Color Temperature : Cool DB Advanced Aspect Ratio Press the button and then use select Picture Reset. or button to Press the button to reset the PICTURE menu options to original values. : 16:9 Picture Reset Screen Picture Mode Color Temperature DB Advanced Aspect Ratio Picture Reset Screen 48 Selection (X or ) resets to the factory settings(defaults). Zenith.book Page 49 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Press the MENU button and then use to select the AUDIO menu. or button or button to Press the button and then use select On or Off. or button to Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. : Standard Auto Volume : On Balance :0 TV Speaker : On Sound Mode Auto Volume Off Balance On TV Speaker SOUND & LANGUAGE CONTROL Press the button and then use select Auto Volume. Sound Mode 49 Zenith.book Page 50 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, and Sports are preset for good sound quality at the factory and are not adjustable. SOUND & LANGUAGE CONTROL Press the SOUND button repeatedly to select the appropriate sound setup as below: Standard, Music, Movie, Sports, and User (your own settings). Press RETURN button to return to TV viewing. You can also adjust Sound Mode in the AUDIO menu. Sound Mode : Standard Auto Volume : On Balance :0 TV Speaker : On Sound Mode Standard Auto Volume Music Balance Movie TV Speaker Sports User 50 Zenith.book Page 51 Wednesday, April 2, 2008 11:46 AM SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Press the MENU button and then use to select the AUDIO menu. or button Press the button and then use select Sound Mode. or button to Press the button and then use select User. or button to : Standard Auto Volume : On Balance :0 TV Speaker : On Sound Mode Standard Auto Volume Music Balance Movie TV Speaker Sports User Selection (X or ) leads you to the detailed setting screen. Press the button and then use appropriate adjustments. or button to make Selecting the Front Surround Press the button and then use or button to select Off, 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. 3D EchoSound System Creates a stunning simulated stereo effect from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage. User Treble 50 Bass 50 Front Surround Off SOUND & LANGUAGE CONTROL Press the button and then use or button to select the desired sound option (Treble, Bass, or Front Surround). Sound Mode Press MENU to confirm. Front Surround 3D EchoSound System 51 Zenith.book Page 52 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Press the MENU button and then use to select the AUDIO menu. SOUND & LANGUAGE CONTROL Press the button and then use select Balance. Press the button and then use appropriate adjustments. or or or button Sound Mode : Standard Auto Volume : On Balance :0 TV Speaker : On button to button to make Sound Mode Auto Volume Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Balance Balance 52 TV Speaker Zenith.book Page 53 Wednesday, April 2, 2008 11:46 AM TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. Press the MENU button and then use to select the AUDIO menu. or button or button to Press the button and then use select On or Off. or button to : Standard Auto Volume : On Balance :0 TV Speaker : On Sound Mode Auto Volume Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Balance TV Speaker Off On SOUND & LANGUAGE CONTROL Press the button and then use select TV Speaker. Sound Mode 53 Zenith.book Page 54 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL STEREO/SAP BROADCASTS SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono, Stereo, or SAP appear in turn. SOUND & LANGUAGE CONTROL 54 If other languages available on the digital signal, select them with the SAP button. Press RETURN button to save and return to TV viewing. Zenith.book Page 55 Wednesday, April 2, 2008 11:46 AM AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. Press the MENU button and then use to select the OPTION menu. or Press the button and then use select Audio. or button Language Key Lock : Off Caption : Off Set ID : Off : Orbiter button to : Off :1 button to Language Input Label Use or French. : English Input Label button to select: English, Spanish, or Key Lock Menu English Audio English Menu English Audio English Caption Set ID SOUND & LANGUAGE CONTROL Press the button and then use select Language. or Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Language Input Label Key Lock Caption Set ID 55 Zenith.book Page 56 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. Press the MENU button and then use to select the OPTION menu. or button SOUND & LANGUAGE CONTROL Press the button and then use select Language. or button to Press the button and then use select Menu. or button to Language Key Lock : Off Caption : Off Set ID :1 Language Input Label Use or button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. : English Input Label Key Lock Menu English Audio English Menu English Audio English Caption Set ID Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. Language Input Label Key Lock Caption Set ID 56 Zenith.book Page 57 Wednesday, April 2, 2008 11:46 AM CAPTION MODE Caption must be provided to help people with hearing loss watch TV. Press RETURN to save and return to TV viewing. You can also adjust Caption in the OPTION menu. Language : English Input Label Language Input Label Key Lock : Off Key Lock Caption : Off Caption Mode Set ID :1 Set ID Analog Text1 Digital Service3 On SOUND & LANGUAGE CONTROL Use the CC button to select Caption On or Off. When selecting Off, Sub-menus for Analog, Digital, and Digital Option become disabled. Digital Option 57 Zenith.book Page 58 Wednesday, April 2, 2008 11:46 AM SOUND & LANGUAGE CONTROL Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when Caption Mode is set On. SOUND & LANGUAGE CONTROL Press the MENU button and then use to select the OPTION menu. or button Press the button and then use select Caption. or button to Press the button and then use select Analog. or button to : English Input Label Key Lock : Off Caption : Off Set ID :1 Language Input Label Use or button to select CC1, CC2, CC3, CC4, Text1, Text2, Text3 or Text4. CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. Press RETURN button to return to TV viewing or press MENU button to return to the previous menu. 58 Language Key Lock Caption Mode Set ID Analog Text1 Digital Service3 On Digital Option
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2008:04:02 12:46:11+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:06:10 11:04:04+08:00 Metadata Date : 2008:06:10 11:04:04+08:00 Document ID : uuid:7912fc11-db3a-47db-be6a-3391ff58dc33 Instance ID : uuid:43adfd92-e389-4b31-9fb9-9f425c7822d3 Format : application/pdf Title : Zenith.book Creator : Kenny.Hu Has XFA : No Page Count : 20 Author : Kenny.HuEXIF Metadata provided by EXIF.tools