LG ELECTRONICS BTM900 Wireless Mouse User Manual

LG Electronics Inc. Wireless Mouse Users Manual

Users Manual

1AppearanceEnglish1. Right Button2. Scrolling Wheel3. Left Button4. Low-Power-Alert LED (Orange)5. Spare USB Power Supply Jack6. Sensor LED (Red)7. Upper Cover Lock8. Receiver Link Button9. Power SwitchBefore Using1. Install Batteries.2. Turn the power on.3. Pair the BTM-900 Bluetooth Mouse with your computer.Install Batteries Note: Please make sure that your Bluetooth software supports HID (Human Interface Device) profile before the pairing process.Un-lock the Upper Cover Lock.1.
2EnglishRemove the upper cover.Install two AAA batteries into the BTM-900 Bluetooth Piano Mouse’s battery slot (if you had installed the batteries, please remove the old one before install the new batteries).2.3.Pairing Process - For Windows XP SP2 Press the Pairing button on the bottom of the mouse for connection link.1.Open the Windows control panel, then select “Bluetooth devices”.Click “Add…”Select “My device is setup and ready to be found”, then click “Next”.In “Peripherals (keyboards, mice, joysticks)”, select BTM-900, then click “Next”.Select “Don’t use a passkey”, then click “Next”.The windows will start to connect BTM-900 automatically. Please press Finish button after the connection process completed.2.3.4.5.6.7.Once the connection between BTM-900 Bluetooth Mouse and your computer is established, the connection will keep permanently. That means the connection will re-establish automatically when the Windows runs.
3English- For Mac OS X 10.2.6 or laterPress the Pairing button on the bottom of the mouse for connection link.Click the Bluetooth icon n the task bar and select “Setup Bluetooth device”.Click “Continue” when the “Bluetooth Setup Assistant” shows up.Choose “Mouse” and then press “Continue” to the next step.The “Piano BTM-900 Mouse” is found by Bluetooth, please press “Continue” to the next step.Click “Continue” when the “Passkey exchange with your mouse” shows up.The process is finished successfully. The BTM-900 Piano Mouse is working now.1.2.3.4.5.6.7.Now you can use the BTM-900 Bluetooth Piano Mouse wirelessly with Bluetooth-enabled Apple computer. Afterward, the connection of the two Bluetooth-enabled devices will re-establish automatically when the Mac OS X runs.Button SwitchPress and hold both buttons for 3 seconds, then release buttons.1.The left button and right button had been functional reversed.2.
4EnglishIf you want to switch buttons back to its original functional definition, please repeat the above step 1 and step 2 for change.3.Spare USB Power SupplyInsert USB connector of spare USB power cable into your laptop.1.Insert DC power connector of spare USB power cable into your BTM-9002.Conserving powerDo not use your mouse for five minutes. After five minutes of inactivity, the mouse automatically enters Sleep mode to conserve batteries’ power.To wake up the mouse, just move the mouse or click either mouse buttons.1.2.When the mouse batteries are running low on power, the LED light on the Mouse turns orange, and blink.To use your mouse’s Sleep mode based on the below setps:
Table OF ContentsEnglish 1Español 5Italiano 9Deutsch 13Françai 17Russkey 21You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions(1)•This device may not cause harmful interference and (2)•This device must accept any interference received, including interference that may cause undesired operation 1.•This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu