LG ELECTRONICS BTS1 Bluetooth Stereo Headset User Manual

LG Electronics Inc. Bluetooth Stereo Headset

Contents

User Manual

OWNER’S MANUALTV & MOBILE Stereo HeadsetBTS1Please read this manual carefully before operating your set and retain it for future reference.ENGLISHRev 1.0 USAll rights reserved.LG Electronics Inc., 2013www.lg.com
1 Getting StartedGetting Started2Getting Started1Safety InformationDeclaration of ConfirmationFCC Notice to Users:This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.Important Note:To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.Federal Communication Commission Interference Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -Consult the dealer or an experienced Radio/TV technician for help.CE Notice to Users:Hereby, LG Electronics Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.FCC ID: SSNBTS1Additional Information1. Radio frequency exposureThis device is a radio transmitter and receiver. When in operation it communicates with a Bluetooth® equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic elds (microwaves) in the frequency range 2.4 to 2.4835 GHz. The output power of the radio transmitter is low (0.001 W). This device is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used any compatible LG Electronics mobile phone.2. Potentially explosive atmosphereTurn o your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.3. Emergency callsIMPORTANT!This device and the electronic device connected to the headset operate using radio signals, mobile and landline networks as well as user - programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e.g. medical emergencies). Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be switched on and in a service area with adequate mobile signal strength. Emergency calls may not be possible on all mobile phone networks or when certain network services and/or phone features are in use. Check with your local service provider.
Getting Started 3Getting Started14. Battery informationA rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the rst few times it is used. Do not expose the battery to extreme temperatures, never above +60 °C(+140 °F) or under -20 °C (-4 °F). For maximum battery capacity, use the battery at room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10 °C(+50 °F) and +45 °C (+113 °F). For your safety, do not remove the battery incorporated in the product. If you need to replace the battery, take it to the nearest authorised LG Electronics service point or dealer for assistance. 5. Recycling the battery in this deviceThe battery in this device must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner who removes the battery will dispose of it according to local regulations.6. Conditions -The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer. -If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics. -This Warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modication or adjustment, acts of God or damage resulting from liquid. -This warranty does not cover product failures due to improper repair installations, modications or service performed by a non- LG Electronics authorised person. Tampering with any of the seals on the product will void the warranty. -THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW. ySome countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not aect the consumer’s statutory rights under applicable national legislation in force, nor the consumer’s rights against the dealer arising from their sales/purchase contract.
Getting Started4Getting Started1Limited WarrantySubject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact centre to get further information.Important Safety InformationAvoiding hearing damagePermanent hearing loss may occur if you use your headset at a high volume. Set the volume to a safe level. Over time you can become accustomed to a higher volume that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or mued speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be aected. Hearing experts suggest that to protect your hearing: yLimit the amount of time you use the headset at high volume. yAvoid turning up the volume to block out noisy surroundings. yTurn the volume down if you can’t hear people speaking near you.Using Headsets safelyUse of headsets to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive whilst driving. Stop using this device if you nd it disruptive or distracting whilst operating any type of vehicle or performing any other activity that requires your full attention.Precautions yDo not drop the device. yDo not modify, repair, or disassemble. yDo not expose directly to water, alcohol, benzene, etc. for cleaning. yDo not expose directly to ammables. yDo not place or keep the device near ammables. yKeep the device away from excessive humidity and dust. yDo not place heavy objects on the device. yChanges or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Trademarks and Licenses© 2012 CSR plc and its group companies.The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
Table of Contents 5123Table of Contents1 Getting Started2 Safety Information2 – Declaration of Confirmation2 – Additional Information4 – Limited Warranty4 – Important Safety Information4 – Precautions4 – Trademarks and Licenses6 Introduction6 – Supplied Items6 – Product Overview7 Charging Battery7 Wearing the Headset7 Power On / Off2 Operating8 Basic Operating9 Advanced Operating9 – Handsfree10 – Voice Dialing10 – Using two Bluetooth devices10 – Listening to TV sound3 Appendix 12 LED Indications and Voice Information12 Troubleshooting13 Specifications
Getting Started6Getting Started1IntroductionSupplied ItemsDeviceTwo sets of ear tips(L)(S)EarphoneUSB cableQuick GuideProduct Overviewj kbac d fegiha LED indicator (Power/Pairing/Battery)b / : Volume button.c : Skips and scans backward.d : Skips and scans forward.e : Play / Pause / Call button.f Microphoneg : Power button.h Clipi Mode selection switch : Mobile mode : TV modej Earphone jackk Micro USB port
Getting Started 7Getting Started1Charging BatteryThis device uses built-in battery. yPlug the USB cable into the USB port at the bottom of the unit. And connect the adapter to charge. yLED lights on red while charging. LED lights on blue when charged. yThe device informs the battery status whenever the device is turned on. (Refer to page 11) yYou can check the battery status by pressing button twice while using the device. yBefore using it, charge the battery in full. yWhen the battery is completely discharged, charging time is approx. 2 hours. yOperating time is approx. 8 hours. It may vary depending on the battery status and operational conditions. yThe device's power is turned o automatically when the USB cable is plugged. , NoteWearing the HeadsetAttach the device to your clothing for more comfortable t.It is recommended to keep the distance within 20 cm between the microphone and user. , NotePower On / OffPower On yPress and hold button for approx. 2 seconds. y"Power on" voice information is heard, blue blinking four times.Power O yPress and hold button for approx. 3 seconds. y"Power o" voice information is heard, violet blinking four times. (Refer to page 11.)
2 OperatingOperating8Operating2Basic OperatingThis device can be used by pairing with a Bluetooth-enabled Blutooth devices.1. Slide up ı switch to (Mobile mode).2. Plug the earphone into the device.3. Press button for approx. 2 seconds to turn on the device. In 5 seconds, "Discovering" voice information is heard with blue light , the device is ready to pair.If repairing is not performed within 3 minutes under the "discovering" mode, the power is turned o automatically. , Note4. Turn on the Bluetooth function on your device's settings and select the “LG BTS1”. 132 When the pairing is completed, "Your device is connected" voice information is heard, violet blinking twice. yDepending on the Blutooth device, you need to enter the PIN code (0000). yList of settings may vary depending on the type of Blutooth device. yOnce the pairing is performed, the device is connected to Blutooth device last connected automatically. , Note 5. Run the music player or other audio content on your Blutooth device. Refer to below about controlling playback with the device. yPress to play / pause. yPress and hold to stop. yPress to play previous le. yPress and hold to rewind. yPress to play next le. yPress and hold to fast-forward.
Operating 9Operating2 yDepends on the Installed Ap, some features may be limited or not work. yKeep the distance less than 10 m between the Blutooth device and this device. Available distance may vary depending on usage conditions. yIf the device is out of the range, the pairing is disconnected. To reconnect, make the device be back in the range. If the device is not reconnected automatically, press button to make the device switch into "discovering" mode. Within 10 m , NoteTo connect to other deviceTo connect with other devices after disconnecting the previous device. Turn o the device and follow the instructions below.1. Press and hold button for more than 5 seconds when the device is turned on. 2. When you hear "Discovering" voice information, turn on the Bluetooth function on your Bluetooth device to select “LG BTS1”. When the pairing is completed, "Your device is connected" voice information is heard, violet blinking twice.Advanced OperatingHandsfreeThis device supports a handsfree function via Bluetooth. Before using this function, pair the device with your phone.Receiving a call: Press button to accept an incoming call.Rejecting a call: Press and hold button to ignore an incoming call.Switching the voice output: Press and hold button for more than 3 seconds during a call.Receiving a second call (During a call): Press and hold button to accept an incoming call. To return to the previous call, press and hold button again (Only when call waiting is set on your phone).Finishing a call: Press button.When you make a phone call: The voice output is connected to the device automatically. Depending on the phone, you need to press button for 3 seconds.To mute or unmute microphone: Press button for 3 seconds during a call.
Operating10Operating2Voice DialingPress and hold button for more than 3 seconds. Speak clearly saved name of the person to call.Voice Dialing Service may vary depending on the phone. , NoteUsing two Bluetooth devicesThis device supports Multi-Connecting via Bluetooth with two Bluetooth devices at the same time. (One Blutooth Media Player and one mobile phone)1. Pair the device with a mobile phone. (Refer to page 8)2. Turn off the device. 3. Press and hold button for more than 5 seconds. The device is ready to pair.4. Pair with the Blutooth media player . 5. While the device is paired with the media player, turn on the Bluetooth function on your mobile phone's settings. 6. Select the “LG BTS1” on the Bluetooth setting list. "Multi-Connection" voice information is heard. yIn case of multi-connetion, the operation of the device is connected to the media player. On your mobile phone, you can only make and receive calls. You can not play music or media les . yYour Blutooth Media Player must only support the A2DP/AVRCP proles, not the Headset/Hands-Free proles. yTwo handsets which support both the Headset/Hands-Free and A2DP/AVRCP proles cannot be connected to this device simultaneously. But one mobile phone supporting Headset/Hands-Free and a Blutooth Media Player supporting only A2DP/AVRCP can be connected. , NoteListening to TV soundThis device can be paired with LG smart TV. You can listen to the TV sound comfortably via Bluetooth using this device.1. Slide down ı switch to (TV mode).2. Plug the earphone into the device.3. Turn on the device. In 5 seconds, "Discovering" voice information is heard with blue light , the device is ready to pair.If repairing is not performed within 3 minutes under the "discovering" mode, the power is turned o automatically. , Note
Operating 11Operating24. Select the [SETTINGS] menu on your LG smart TV.5. Select the [SOUND] on the [Settings] menu.6. Select the [Sound out] on the list.7. Select the [LG Sound Sync. (Wireless)] to search the device to connect.8. When the search is complete, “LG BTS1” appears on the screen. When the pairing is complete, "Your device is connected" voice information is heard from the device, violet blinking twice. yOnce the pairing is performed, the device is connected to the latest TV automatically. yDepending on the type of LG Smart TV, Sound Sync settings menu may be dierent. yConnecting time is approx. 10 ~ 20 seconds. yKeep the distance less than 10 m between the TV and the device. Within 10 m , Note
3 Appendix Appendix12Appendix3LED Indications and Voice InformationPower LED indicator Voice informationOn Blue - Blinks four times. Power onO Red - Blinks four times. Power oPerformance LED indicator Voice informationReady to pair Blue - Turned on. DiscoveringConnected Violet - Blinks twice. Your device is connectedBattery LED indicator Voice informationHigh (more than 60%) Blue - Blinks. Battery highMedium (more than 20%) Violet - Blinks. Battery mediumLow (less than 20%) Red - Blinks. Battery lowCharging Red - Turned on. -Charged Blue - Turned on. -TroubleshootingSymptom Cause & SolutionNo power. yThe battery is discharged. Recharge the battery.Bluetooth pairing does not work well. yBe sure your Bluetooth device is on. yRemove the obstacle in the path of the Bluetooth device and the device. yDepending on the type of the Bluetooth device or surrounding environment, your device may not be paired with the device. yCheck ı switch selection switch.No sound or sound distortion. yThe volume of this device or your Bluetooth device is set to minimum. yWhen you use the other device at high volume, the sound quality may be deteriorated. Lower the volume of the devices. yIf you use this device for purposes other than listening to music, the sound quality may be lowered or the unit may not work properly.Can not connect a call with the device. yMake sure your phone supports the Bluetooth® prole. yCheck the battery status by pressing button twice.The device does not operate normally. yPlease contact customer service.
Appendix 13Appendix3SpecificationsGeneralPower Supply 5 V 0 2.0 A (USB cable) / Built-in rechargeable battery.Earphone jack Ø 3.5 mmCommunication yBluetooth® V 3.0 yRange of Frequency: 2.402 GHz — 2.480 GHzOperating time yStand by: Up to 10 days. yTalk and Music play: Up to 8 hrs. Charging time Less than 2 hrs.Dimensions (W x H x D) Approx. 35.9 mm x 50.2 mm x 19.2 mmNet Weight (Approx.) 18.4 gOperating temperature 5 °C — 45 °COperating humidity Less than 65 % yDesign and specications are subject to change without notice.

Navigation menu