LG ELECTRONICS MNC4U1106 Wireless Mouse User Manual

LG Electronics Inc. Wireless Mouse Users Manual

Users Manual

CM-400 User Manual English Exterior 1) Mouse Body 1 Right-click Button 5 Sensor 2 Scroll Wheel 6 Upper Cover（Battery Insertion Cover） 3 Left-click Button 7 Power button/Bind button 4 Lower Power indicator LED(Blue) 8 Upper Cover Knob 2) Receiver 1. USB Receiver
CM-400 User Manual English To use the product 1) Insert the batteries. 2) Connect the receiver to the PC. 3) Establish communication line between the mouse and the receive. Inserting Batteries 1) At the bottom of the mouse, follow the direction of the arrow to push gently, at the same time, to pull out the battery cover in opposite direction, to pull out the battery cover. 2) Follow the arrow where how to put the batteries in the right direction ※ Electricity of the enclosed batteries begins to be discharged little by little immediately after production. Therefore, according to when the products are opened, battery life could be shorter than expected. The company requests users’ understanding of such electricity discharge.
CM-400 User Manual English Connecting the receiver to the PC Connect the USB receiver to an unused USB port on your computer 1) Turn on the computer power, mouse will working normally. 2) If computer on, your PC will recognize the receiver and automatically install a basic driver. ※ Important: Please wait until a message or a window appears and then follow the instructions to the completion of the driver installation. ON To readily carry the mouse 1) Open the battery case. 2) Insert nano wireless receiver inside the compartment by the direction of the arrow 3) Close the battery case back.
CM-400 User Manual English To establish a wireless connection, please follow the instructions If the mouse LED is blinking blue, please replace the batteries. If the mouse is not working 1) Make sure the mouse power is on(turn-on/working) 2) Check the battery capacity and installation. 3) Click bind button one time shortly. 4) Check receiver installation. 5) Try another USB port. Battery Power Saving When not using the mouse, press the power button on the bottom of mouse for 3~5 seconds to shut down the mouse power for battery power saving. Then, press the power button for 1 to 3 seconds to re-start the mouse power. Battery replacement indicator LED and low power mode of the mouse for prolonged use After being used for quite a while, the battery voltage drops. The lower power indicator LED (located on the upper area of the mouse) also turns on blue at about 80% of battery power used. When the LED is turned on, replace the battery as soon as possible. If the batteries are not replaced, the mouse cursor movement slows down. (Mouse may not work until batteries are replaced)

Navigation menu