LG Innotek RBHAT223A Wi-Fi + BT Combo module User Manual

LG Innotek Co., Ltd. Wi-Fi + BT Combo module

User manual

TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (4 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 40211. ApplicationThis specification is applied to LG Innotek Bluetooth v4.1 and WLAN(IEEE 802.11.b/g/n) Module RBHA-T223A which includes WL1833Q.2. QualityQuality should meet each condition which mentioned on this specification. However, the items which are not mentioned on this specification follow the inspection agreements and standards which are agree with both companies.3. Appearance and Characteristics1) AppearanceAppearance should not contaminated by harmful materials and should not have cracks etc. Mechanical dimensions should meet the contents of clause 8.2) CharacteristicsElectrical characteristics should meet the contents of clause 10.4. Application of Bluetooth v4.1 and WLAN(IEEE 802.11 b/g/n) module1) Automotive5. Maximum RatingNo Item Rating Unit1 Operating Temperature Range -40 ~ +85 ℃2 Storage Temperature Range -40 ~ +105 ℃3 VBAT_3V3 Voltage Range 3.1~ 3.6 V4 VIO_1V8 Voltage Range 1.62 ~ 1.95 V
TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (5 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 40216. TestElectrical characteristics are tested for every products. However, if there are any objection in judgments, it should be treated with agreements of companies.7. Labeling InformationNo. Index①PRODUCT NAME②MODEL PART NO.③COMPANY④MANUFACTURED YEAR (0~9)⑤MANUFACTURED MONTH(1,2, …9, A,B,C)⑥MANUFACTURED DATE (1~31)⑦Manufactured Serial Number : SMT Line no⑧Manufactured Serial Number : Shift no(A,B,C)⑨Manufactured Serial Number : (001~999)⑩FCC ID⑪CE Logo⑫Certification Number②④ ⑤①③⑥⑦⑧RBHA-T223ALGIT x x xxx x xxxVESPUCCIRBHA-T223ALG 55211A 001 FCC ID:YZP-RBHAT223A0678VESPUCCIFCC ID:YZP-RBHAT223A⑨⑩⑪ ⑫0678
TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (6 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 40218. Mechanical DimensionLWa1 a2 a5b3a3c1c2c3b2a4b1Mark Dimension Mark Dimension Mark Dimension Mark Dimension Mark DimensionW 21.2±0.2 L 22±0.2 a1 1.2±0.1 a2 0.6±0.1 a3 1.2±0.1a4 1.15±0.1 a5 0.15±0.1 b1 1.2±0.1 b2 2.75±0.1 b3 1.2±0.1c1 4.85±0.1 c2 4.85±0.1 c3 0.3±0.1 T 2.9 Max C 0.08 MaxUnit : mm
TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (7 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 40219. General Features 1) Module Features • Intended for Automotive infotainment applications (-40℃to +85℃)• Operating Voltage is 3.3V Power Rail and 1.8V IO Level • WLAN, BT, BLE on a single chip provides a unique scalable platformcatering to all connectivity needs in vehicle infotainment • Shared HCI transport for BT/BLE over UART and SDIO for WLAN.• Automotive Module. -. WL1833Q : AEC-Q100 Qualified-. Diplexer / TCXO : AEC-Q200 Qualified• BT 4.0 BLE and all audio processing features work in parallel • Support 1-Antenna (BT and WLAN 2.4GHz)• Integrated Bluetooth RF Filter.• RoHS Compliant2) Package information• Module package is QFN (Quad Flat No-Lead) type .Notice) If the module attached to the set board is flipped during the reflow process, shieldcase of the module may detach or fall apart.3) JEDEC MSL (Moisture Sensitivity Level) Test• MSL 3 Level (Floor Life Time : 168Hrs. / Condition : ≤30℃, 60% RH)• Standard : IPC / JEDEC J-STD-020C9.1 BT(v4.1) + WLAN(IEEE 802.11 b/g/n) Module BakeSoakReflow24Hrs. / 125℃40Hrs. / 60℃, 60% RH3 times / 240℃4.1
TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (8 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 40219. General Features 1) Bluetooth Features• Bluetooth Power Class 2 • Support Bluetooth 4.1 BLE• Includes concurrent operation and built-in coexisting prioritization handling of BT,BLE, ANT audio processing and WLAN• Embedded Fully Bluetooth v4.1(BLE) System Compliant• Dedicated Audio processor supporting on chip SBC encoding +A2DP;- Assisted A2DP(A3DP) support- SBC encoding implemented internally - Assisted WB-Speech(AWBS) support- modified SBC codec implemented internally • Support High-speed UART up to 4Mbps 2) BLE Features • Fully compliant with BT 4.1 BLE dual mode standard• Support for all roles and role- combinations, mandatory as well as optional • Supports up to 10 BLE connections• Independent buffering for LE allows having large number of multiple connectionswithout affecting BR/EDR performance • Packet boundary flags• Encryption• Extended inquiry response9.2 Bluetooth
TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (9 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 40219. General Features1) WLAN Features• Support for IEEE 802.11b/g/n• Support for IEEE 802.11n(20/40MHz) partial streams 2.4GHz• WLAN MAC Baseband Processor and RF transceiver• Supports 4bits SDIO host interface , including high speed (HS) and V3 modes• Medium Access Controller (MAC)– Hardware-Based Encryption/Decryption using 64-, 128-, and 256-Bit WEP, TKIPor AES Keys,– Supports requirements for Wi-Fi Protected Access (WPA and WPA2.0) and IEEEStd 802.11i [includes hardware-accelerated Advanced Encryption Standard (AES)]– Designed to work with IEEE Std 802.1x• IEEE Std 802.11d,e,h,i,k,r PICS compliant• Supports Concurrent operation in multiple networks• Client of AP, AP, Wi-Fi Direct9.3 WLAN2) Functionality Key Features : Encryption• Hardware encryption according to IEEE 802.11-2007 and IEEE 802.11w-2009:• WEP40/64• WEP104/128• CCMP (AES)• TKIP• BIP• Hardware encryption support for Cisco® CKIP
TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (26 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 402111. Pin Configuration<Top Through View>No Pin Name Description1GND Ground2GPIO4 GPIO43UART_DBG_WL WLAN logger 4IRQ_WL SDIO available, interrupt out. Active High Needs to force to 1 at power up to use WL_RS232_TX/RX5GND Ground6RTC_CLK Slow Clock / RTC clock (Real Time Crystal )7N.C N.C8WL_RS232_TX WL_RS232_TX9GND Ground10 GND Ground11 GPIO9 General purpose IO/LTE12 GPIO10 General purpose IO/LTE13 GPIO11 General purpose IO/LTE14 GPIO12 General purpose IO/LTE15 GND Ground 16 N.C N.C17 GND Ground18 UART_DBG_BT BT debug (logger)19 1V8_VIO Connect to 1.8V external VIO / Requires 0.uF cap to GND20 N.C. N.C21 HCI_TX_BT UART TX HOST 22 HCI_RX_BT UART RX HOST
TITLE : Specifications for approval (RBHA-T223A)(CUSTOMER P/NO : )REV 0.1 (27 / 39)REVAPPDCHKDDSGDDOCUMENT NO.RBHA-T223ALG Innotek Co., Ltd(30) - 4021No Pin Name Description23 HCI_RTS_BT UART RTS to Host24 HCI_CTS_BT UART CTS from Host25 GND Ground26 N.C. N.C.27 GND Ground28 GND Ground29 N.C(2.4GHz_Atenna_Ready) N.C(2.4GHz_Atenna_Ready)30 GND Ground31 AUD_FSYNC_BT BT PCM/AUDIO Frame sync32 AUD_IN_BT BT PCM/AUDIO DATA in33 AUD_OUT_BT BT PCM/AUDIO DATA Out34 AUD_CLK_BT BT PCM/AUDIO Clock35 SDIO_D3_WL WLAN SDIO Data bit 336 SDIO_D2_WL WLAN SDIO Data bit 237 SDIO_D1_WL WLAN SDIO Data bit 138 SDIO_D0_WL WLAN SDIO Data bit 039 SDIO_CMD_WL WLAN SDIO Command in40 SDIO_CLK_WL WLAN SDIO Clock41 GND Ground42 RF Antenna(2.4GHz_ANT) 2.4GHz_ANT(Wi-Fi/BT)43 GND Ground44 GND Ground45 GND Ground46 GND Ground47 GND Ground48 GND Ground49 WL_RS232_RX WL_RS232_RX50 WL_EN WL Enable High 51 BT_EN BT Enable High 52 GND Ground53 VBAT_3V3 Connect to 3.3V54 VBAT_3V3 Connect to 3.3V55 GND Ground56 GND Ground57 GND Ground58 GND Ground59 GND Ground60 GND Ground
1. APPLICATION SCORPETHIS PRODUCT CAN BE USED IN RADIO TELECOMMUNICATION SYSTEMWITH 2.4~2.5Ghz LIKE WIFI SYSTEM.2. OPERATING CONDITIONSNO. ITEMS SPECIFICATIONS 2-1 OPERATING ENVIRONMENT TEMPERATURE : -20~70℃ HUMIDITY : ~85% RH 3. ELECTRONIC SPECIFICATIONSNO ITEMS SPECIFICATIONS 3-1 IMPEDANCE 50Ω 3-2 FREQUENCY RANGE 2.4~2.5Ghz 3-3 PEAK GAIN (ON HORIZONTAL) 2.0dBi 3-4 VSWR ≤ 2.0 4. APPEARANCE AND MECHANICAL SPECIFICATIONSNO. ITEMS SPECIFICATIONS 4-1 CONNECTOR SMA PLUG WITH MALE 4-2 BENDING ANGLE : 180° / 45° / 90° ± 5% 4-3 COLOR WHITE RESINE : CAP=TPEE HOLDER=PBT CONNECTOR= SMA TYPE 4-4 APPEARANCE AND DIMENSION REFER TO DRAWING 4-3 WEIGHT 7.8g ANTENNA InformationModel : THCT-24W Type : Dipole ( λ/4 @ 2GHz band)Configuration : 2.44GHz for External Dipole Antenna Between the antenna and the module a path loss is 0.1dBi and a distance is 30mm.
Setting Test Environments - Required Items 1) The Evaluation Board 2) Power supply (DC Adapter +5V ,1A) 3) USB Cable 4) Shield Box
Please connect +5V Power Cable at the Power Connector And USB Connector with Host PC Power Connector USB Connector Status LED Reset Switch down - Evaluation Board Setting BT+WI-FI ANT Not USE
CONFIDENTIAL 29 IMPORTANT INFORMATION The information contained in this document is confidential and should not be disclosed to any third party without the prior written consent of LGIT. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.105 (B) Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.•Consult the dealer or an experienced radio/TV technician for help.Important: Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
CONFIDENTIAL 30 OEM instructions I. “Module is limited to OEM installation ONLY “ II. “OEM integrators is responsible for ensuring that the end-user has no manualinstructions to remove or install module”III. “FCC RF Exposure requirements: Module is limited to installation in mobile or fixedapplications, according to Part 2.1091(b). Separate FCC approval is required for allother operating configurations, including portable configurations with respect to Part2.1093 and different antenna configurations.”IV. “If (1) the module’s FCC ID is not visible when installed in the host, or (2) if the host ismarketed so that end users do not have straightforward commonly used methods foraccess to remove the module so that the FCC ID of the module is visible; then anadditional permanent label referring to the enclosed module: “Contains TransmitterModule FCC ID: YZP-RBHAT223A” or “Contains FCC ID: YZP-RBHAT223A” must beused. The host OEM user manual must also contain clear instructions on how endusers can find and/or access the module and the FCC ID.”V. “A host product is required to comply with all applicable FCC equipment authorizations regulations, requirements and equipment functions not associated with the transmitter module portion. For example, compliance must be demonstrated to regulations for other transmitter components within the host product; to requirements for unintentional radiators (Part 15B), such as digital devices, computer peripherals, radio receivers, etc.; and to additional authorization requirements for the non-transmitter functions on the transmitter module (i.e., Verification, or Declaration of Conformity) (e.g., Bluetooth and WiFi transmitter modules may also contain digital logic functions) as appropriate. VI. To ensure compliance with all non-transmitter functions the host manufacturer isresponsible for ensuring compliance with the module(s) installed and is fully operational.For example, if a host was previously authorized as an unintentional radiator under theDeclaration of Conformity procedure without a transmitter certified module and amodule is added, the host manufacturer is responsible for ensuring that after themodule is installed and operational the host continues to be compliant with the Part 15Bunintentional radiator requirements. Since this may depend on the details of how themodule is integrated with the host, the grantee (the party responsible for the modulegrant) shall provide guidance to the host manufacturer for compliance with the Part 15Brequirements.”

Navigation menu