LG Innotek TWFMR003D Electronic Shelf Label User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	3516818
Application ID	OJ8U1JeiOof6aNFfSrXUMg==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.28kB (715941 bits)
Date Submitted	2017-08-17 00:00:00
Date Available	2018-02-13 00:00:00
Creation Date	2017-08-07 18:02:34
Producing Software	Microsoft® PowerPoint® 2010
Document Lastmod	2017-08-07 18:02:34
Document Title	슬라이드 제목 없음
Document Creator	Microsoft® PowerPoint® 2010
Document Author:	박장순

USER MANUAL
PRODUCT NAME : 802.11 a/b/g/n/ac WiFi Module
MODEL NAME
: TWFM-R003D
Customer PN
: UWLMDL0GS001
The information contained herein is the exclusive property of LG Innotek
and shall not be distributed, reproduced or disclosed in whole or no in part
without prior written permission of LG Innotek.
For Funai’s Exclusive Use
Designed
Checked
Approved
LG Innotek Co., Ltd.
K.H. CHOI
D.S. OH
S.D. CHOI
DOCUMENT No.
2017.07.07
2017.07.07
2017.07.07
PAGE
11
(00)-0073
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
MODEL NAME : TWFM-R003D
REV.NO
PAGE : 1 / 11
Index
No
Description
Page
Features
Ordering Information
Label Marking
Absolute Maximum Ratings
Operating Conditions
Standard Test Conditions
Power Sequence
Pin Description
Mechanical Characteristics
10
Outline Drawing
Regulation Information
Information for OEM Integrator
10
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
REV.NO
MODEL NAME : TWFM-R003D
PAGE : 2 / 11
1. Features
TWFM-R003D is the module for IEEE 802.11a/b/g/n/ac wireless LAN .
TWFM-R003D is based on RealTek RTL8812BU solution.
 IEEE 802.11 a/b/g/n/ac Dual Band WLAN infrastructure
 Size : 70.0mm x 20.0mm x 10.3mm
 Dual band 2T2R mode with data rate up to 866Mbps
 Single and dual band antenna Support
- Two PCB printed antenna for WLAN
 Host Interface : USB2.0
 Security : WAPI, WEP, WPA, WPA2, WMM, AES, WEP, TKIP, CKP
 Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB
 Support WiFi Direct
 Support WOWL
2. Ordering Information
Model
Description
TWFM-R003D
802.11 a/b/g/n/ac WiFi Module Dual Band 2T2R MIMO
3. Label marking - TBD – will be updated
①
②
③
④
⑤
Model Name : TWFM-R003D
Funai : UWLMDL0GS001
MAC ID : 001EB2B00339
Lot No : 1707A0801
⑥
IFETEL : XXX-XXXX
For TELEC Certification
① Model Name : TWFM-R003D ④ Product Lot No. : 1707A0801
② Customer & P/N
-17 : Year
- 08 : Date
③ MAC Address
- 07: Month
- 01 : Manufactured Process
⑤ IFETEL ID
- A :Revision No.
- FCC & IC ID on PCB Silk
Copyrightⓒ. 2017. All Rights Reserved.
⑥ 2D Matrix(include MAC ID)
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
REV.NO
MODEL NAME : TWFM-R003D
PAGE : 3 / 11
4. Absolute Maximum Ratings
Caution : The specifications in Table 1 define levels at which permanent damage to the
device can occur. Function operation is not guaranteed under these conditions.
Operating at absolute maximum conditions for extend periods can adversely affect the
long-term reliability of the device.
Parameter
Min
Max
Unit
Storage Temperature
-10
+80
℃
Storage Humidity (40℃)
90
< Table 1 >
. Other conditions
1) Do not use or store modules in the corrosive atmosphere, especially where chloride
gas, sulfide gas, acid, alkali, salt or the like are contained.
Also, avoid exposure to moisture.
2) Store the modules where the temperature
and relative humidity do not exceed 5 to 40℃ and 20 to 60%.
3) Assemble the modules within 6 months.
Check the soldering ability in case of 6 months over.
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
REV.NO
MODEL NAME : TWFM-R003D
PAGE : 4 / 11
5. Operating Conditions
Parameter
Min
Typ
Max
Unit
Ambient Temperature
60
℃
Ambient Humidity (40℃)
85
Supply Voltage
3.15
3.3
3.45
Vdc
6. Standard Test Conditions
The Test for electrical specification shall be performed under the following condition
Otherwise this following conditions, not guaranteed this performance.
6-1. Ambient condition
Temperature
25 ± 5℃
Humidity
65 ± 5%
6-2. Power supply voltages
Input power
Supply Voltage
VCC 3.3V
+3.3V ±0.15V
6-3. Current consumption
Current Consumption
Min.
Typ.
3.3V I/O Supply Voltage
800
1.05V Core Supply Voltage
300
Max.
Unit
mA
Stand by
2.13
Inrush
700
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
REV.NO
MODEL NAME : TWFM-R003D
PAGE : 5 / 11
7. Power Sequence(include Reset)
7-1. TWFM-R003D USB Bus Power on Sequence
 Ton : The main power ramp up duration
 Tpor : The power on reset release and management unit executes power on tasks
 Tattach : USB attach state. The duration from resistor attached to USB host starting
card detection procedure
 Txtal : XTAL starts
7-2. Typical Timing Range
Parameter
Min
Typ
Max
Unit
Ton
1.5
ms
Tpor
20
ms
Txtal
1.5
ms
Tattach
100
250
ms
T1v2
11
ms
Parameter
Min
Typ
Max
Unit
3.3V I/O Supply Voltage
3.15
3.30
3.45
1.05V Core Supply Voltage
0.95
1.05
1.15
7-3. DC Power voltages
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV.NO
MODEL NAME : TWFM-R003D
REV. DATE : 2017.07.07
PAGE : 6 / 11
8. Pin Description
Pin No.
Pin Name
I/O
Pin Description
WOWLAN
I/O
WLAN wake-up signal
GND
Ground
RESET
Reset from Host
OPEN
I/O
(PDN : Host Wake)
VCC
+3.3V
WLAN USB D-
I/O
USB Communication signal USB_DN
WLAN USB D+
I/O
USB Communication signal USB_DP
GND
Ground
< TOP View >
④
⑧
①
⑤
< Bottom View >
Note.
1) Recommend a Module install sequence for prevent USB device failure
- Supply 3.3V power
- Connect to data signal (USB_DP, USB_DN)
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
REV.NO
MODEL NAME : TWFM-R003D
PAGE : 7 / 11
9. Mechanical Characteristics
9-1. Outline view
Item
Test Conditions
Assembly
No defects of wiring, soldering and assembling
Appearance
No dirt, rust, corrosion or foreign material
9-2. Appearance structure
Item
Test Conditions
Dimension
As assembly drawing
Mounting
As assembly drawing
Weight
5.85 ± 0.6g
9-3. Module Picture
< Top >
< Bottom >
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
MODEL NAME : TWFM-R003D
10. Outline Drawing
'17. 06. 19
Jangeun Yang.
'17. 06. 19
Kyungho Choi
'17. 06. 19
Changsung Kim
Copyrightⓒ. 2017. All Rights Reserved.
REV.NO
PAGE : 8 / 11
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
MODEL NAME : TWFM-R003D
REV.NO
PAGE : 9 / 11
Regulation Information
[FCC Information]
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning&Caution:
Any changes or modifications to the equipment not expressly approved by the party responsible
for compliance could void user’s authority to operate the equipment. Antenna shall be mounted
in such a manner to minimize the potential for human contact during normal operation. The
antenna should not be contacted during operation to avoid the possibility of exceeding the FCC
radio frequency exposure limit.
A minimum separation distance of 20 cm must be maintained between the antenna and the
person for this appliance to satisfy the RF exposure requirement.
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
REV. DATE : 2017.07.07
MODEL NAME : TWFM-R003D
REV.NO
PAGE : 10 / 11
Regulation Information
[IC Information]
This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject
to The following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence(s), Son
utilisation est soumise à Les deux conditions suivantes: (1) cet appareil ne peut pas provoquer
d’interférences et (2) cet appareil doit accepter Toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.
※ This device is going to be operated in 5 150 MHz ~ 5 250 MHz frequency range, it is
restricted in indoor environment only.
Copyrightⓒ. 2017. All Rights Reserved.
DOCUMENT No :
USER MANUAL
REG. DATE : 2017.07.07
MODEL NAME : TWFM-R003D
REV. DATE : 2017.07.07
REV.NO
PAGE : 11 / 11
Information for OEM Integrator
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and
users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
[End product labelling]
The label for end product must include “Contains FCC ID: YZP-TWFMR003D, Contains IC: 7414CTWFMR003D”.
[CAUTION: Exposure to Radio Frequency Radiation]
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. “This equipment should be installed and operated with minimum distance of
20cm between the radiator and your body. This transmitter module is authorized only for use in
device where the antenna may be installed such that 20 cm may be maintained between the
antenna and users.”
Copyrightⓒ. 2017. All Rights Reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Language                        : ko-KR
Tagged PDF                      : Yes
Title                           : 슬라이드 제목 없음
Author                          : 박장순
Create Date                     : 2017:08:07 18:02:34+09:00
Modify Date                     : 2017:08:07 18:02:34+09:00
Producer                        : Microsoft® PowerPoint® 2010
Creator                         : Microsoft® PowerPoint® 2010

EXIF Metadata provided by EXIF.tools