LG 32LB5800 User Manual LCD TV Manuals And Guides 1504058L

User Manual: LG 32LB5800 32LB5800 LG LCD TV - Manuals and Guides View the owners manual for your LG LCD TV #32LB5800. Home:Electronics Parts:LG Parts:LG LCD TV Manual

Open the PDF directly: View PDF .
Page Count: 23

Download
Open PDF In Browser	View PDF

Life's Good

LED TV*
*LG LED TV applies
Please

read this

for future
32LB5800

LCD screen with LED backlights.

manual

carefully

before

operating

},,our set and

32LB580B

39LB5800
42LB5800
55LB5800

47LB6100
50LB6100
55LB6100
60LB6100
65LB6190
* M

P/NO

retain

reference.

: MFL68027912

(1401-REVO0)

F L

6 8

7 9

www.lg.com

IMPORTANT

SAFETY

IMPORTANT

INSTRUCTIONS

SAFETY

Always comply with the following
performance of your product.

INSTRUCTIONS

precautions to avoid dangerous situations and ensure peak

Read these instructions.
Keep these instructions.
Heed all waming_
Follow all instructions.
TO REDUCE THE RiSK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead

Do not use this apparatus

near water.

symbol,

within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within the

Clean only with a dry cloth.

product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
triangle
is intendedpoint
to alert
to the
The exclamation
withintheanuser
equilateral
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING/CAUTION
-TO REDUCE THE RiSK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be
seriously injured or there is a possibility of accident
or death,
A

Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

CAUTION

If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.

WARNING: This product contains chemicals known to
the State of California to cause cancer and birth defects
or other reproductive harm.
Wash hands after hand/ing.

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ by
country).

IMPORTANT
SAFETY
INSTRUCTIONS
3
Donotpress
strongly
upon
thepanel
with
ahand
orasharp
object
such
asanail,
pencil
orpen,
or
make
ascratch
onit.

Protect
thepower
cord
from
being
walked
on
orpinched
particularly
atplugs,
convenience
receptacles,
and
thepoint
where
they
exitfrom
theapparatus.

Only
use
attachments/accessories
specified
by
themanufacturer.

Use
only
withacart,
stand,
tripod,
bracket,
or
table
specified
bythemanufacturer,
orsold
with
theapparatus.
When
acart
isused,
use
caution
when
moving
thecalt/apparatus
combination
to
avoid
injury
from
tip-over.

Unplug
thisapparatus
during
lightning
storms
or
when
unused
forlong
periods
oftime.

Refer
allservicing
toqualified
service
personnel.
Servicing
isrequired
when
theapparatus
has
been
damaged
inany
way,
such
aspower-supply
cord
orplug
isdamaged,
liquid
has
been
spilled
orobjects
have
fallen
into
theapparatus,
the
apparatus
has
been
exposed
torain
ormoisture,
does
notoperate
normally,
orhas
been
dropped.

Donotstick
metal
objects
orany
other
conductive
material
into
thepower
cord.
Donottouch
the
end
ofthepower
cord
while
itisplugged
in.

Keep
thepacking
anti-moisture
material
orvinyl
packing
outofthereach
ofchildren.
Anti-moisture
material
isharmful
ifswallowed.
Ifswallowed
bymistake,
force
thepatient
tovomit
and
visit
thenearest
hospital.
Additionally,
vinyl
packing
can
cause
suffocation.
Keep
itoutofthereach
of
children.
CAUTION
concerning
thePower
Cord
(Can
differ
bycountry):
Itisrecommended
that
appliances
beplaced
upon
adedicated
circuit;
thatis,asingle
outlet
circuit
which
powers
only
that
appliance
and
has
noadditional
outlets
orbranch
circuits.
Check
thespecification
page
ofthisowner's
manual
tobecertain.
Donotconnect
toomany
appliances
tothesame
ACpower
outlet
as
thiscould
result
infireorelectric
shock.
Donot
overload
wall
outlets.
Overloaded
walloutlets,
loose
ordamaged
wall
outlets,
extension
cords,
frayed
power
cords,
ordamaged
orcracked
wire
insulation
aredangerous.
Any
ofthese
conditions
could
result
inelectric
shock
orfire.
Periodically
examine
thecord
ofyour
appliance,
and
ifits
appearance
indicates
damage
ordeterioration,
unplug
it,discontinue
use
oftheappliance,
and
have
thecord
replaced
withanexact
replacement
part
byanauthorized
service.
Protect
thepower
cord
from
physical
ormechanical
abuse,
such
asbeing
twisted,
kinked,
pinched,
closed
ina
door,
orwalked
upon.
Pay
particular
attention
to
plugs,
walloutlets,
and
thepoint
where
thecord
exits
theappliance.
Donotmove
theTVwiththe
power
cord
plugged
in.Donotuse
adamaged
orloose
power
cord.
Besure
dograsp
theplug
when
unplugging
thepower
cord.
Donotpull
on
thepower
cord
tounplug
theTV.

Warning
-Toreduce
therisk
offireorelectrical
shock,
donotexpose
thisproduct
torain,
moisture
orother
liquids.
Donottouch
theTV
withwethands.
Donotinstall
thisproduct
near
flammable
objects
such
asgasoline
orcandles,
or
expose
theTVtodirect
airconditioning.

IMPORTANT

SAFETY

INSTRUCTIONS

Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g. on
shelves above the unit).

Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70

Ground
Electric

Antenna

Lead

Power

Service

in Wire

Clamp
Service

Equipment
Ground

Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire to
prevent possible electric shock (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker. Do
not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.

Power

Supply

As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user's
authority to operate this product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can come in contact wkh
such power lines or circuits as death or serious
injury can occur. Be sure the antenna system
is grounded to provide some protection against
voltage surges and built-up static charges. Section
810 of the National Electrical Code (NEC)in the
U.S.A. provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes and requirements for the
grounding electrode.

Clamp

NEC:

National

Electrical

Code

Electrode
(NEC Art

Grounding

System
250,
Part

• Cleaning
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the TV
as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners, or benzine.
• Moving
Make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2
or more people to carry larger TVs. Do not press
or put stress on the front panel of the TV.
• Ventilation
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other
materials while plugged. Do not install in excessively
dusty places.
• If you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.
• Keep the product away from direct sunlight.
• Never touch this apparatus or antenna during a
thunder or lightning storm.
• When mounting a TV on the wall, make sure not
to install the TV by hanging the power and signal
cables on the back of the TV.
• Do not allow an impact shock or any objects to fall
into the product, and do not drop anything onto
the screen.
• Disconnecting

the Main Power

The power outlet used with this device must
remain easily accessible.
• Store the accessories (battery, etc.) in a safe
location out of the reach of children.
• This apparatus use batteries. In your community
there might be regulations that require you
to dispose of these batteries properly due to
environmental
considerations. Please contact
your local authorities
information.

for disposal or recycling

Do not dispose of batteries in a fire.
Do not short circuit, disassemble, or allow the
batteries to overheat.

IMPORTANT
SAFETY
INSTRUCTIONS
5
*

Dot Defect

The Plasma or LCD pane] is a high technology product
with resolution of two mi]flon to six million pixeb. In a
very few cases, you could see fine dots on the screen
while you're viewing the TV. Those dots are deactivated
pixels and do not affect the performance and reliability
of theTV.
* Generated Sound
Cracking noise: A cracking noise that occurs when
watching or turning off the TV is generated by plastic
thermal contraction due to temperature and humidity.
This noise is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A low level
noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a
product. It varies depending upon the product.
This generated sound does not affect the performance
and reliability of the product.
* Take care not to touch the ventilation openings. When
watching the TV for a longperiod, the ventilation
openings may become hot. This does not affect the
performance of the product or cause defects in the
product.
* Do not install this product on a wall if it could be
exposed to oil or oil mist. This may damage the product
and cause it to fall.
*

If the TV feels cold to the touch, there may be a small
flicker when it is turned on. This is normal, there is
nothing wrong with TV. Some minute dot defects may
be visible on the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse effect on
the TV's performance. Avoid touching the LCD screen
or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion
effects on the screen.

If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on the
letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen
for a long period of time (2 or more hours for LCD,
1 or more hours for the Plasma TV) to prevent
image burn.

For USA and Canada

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications.
However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipn lent to an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user's authority to operate the equipment.

This reminder is provided to call the CATV system
instal]er's attention to Article 820-40 of the
National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected
to the grounding system of the building, as close
to the point of the cable entry as practical.

LICENSES
/ OPEN

SOURCE

SOFTWARE

NOTICE

LICENSES
Supported licenses may differ by model. For more information

DIGITAL

PLUS

I IVX

about licenses, visit www./g.com.

IGJ-J_:
r I.I_IONMOLnM_OIA
I_ R AC

@dl.

H D

2.0+DigitalOut

OPEN

SOURCE

SOFTWARE

NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit http.//opensoume./de.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics wilt also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to 'opensource@lge.com'.
This offer is valid for three (3) years from the date on which you purchased
the product.

NOTE

Image shown may differ from your TV.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product model that you are
uslng.
New features may be added to this TV in the future.

ASSEMBLING

AND

PREPARING

Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

1
Remote Control,
Batteries (AAA)

Owner's

Manual

Power Cord

(For 32LB580B,
32LB5800)

(For 39/42/55LB5800,
47/50/55/60LB6100,
65LB6190)

(For 42LB5800)

Stand Screws
4 EA, M4x L20

Stand Screws
4 EA, M4x L14

Wall Mount Spacer
2 EA

Cable Holder

Stand Base

Stand Holder
2 EA

ASSEMBLING

AND

PREPARING

Z__ CAUTION
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
On some models, the thin film on screen is a part of TV, so don't take it off.
-@

NOTE
The items supplied with your product may vary depending upon the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMt cables and USB devices should have bezels less than 10 mm
(0.39 inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not
fit into your TV's USB port.

_A < 10 mm (0.39 inches)
_B < 18 mm (0.7 inches)

Optional

Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items. These devices only work with certain models.
The model name or design may be changed manufacturer's circumstances or policies.

AN-MR500
Magic Remote

AN-VC5**
Video Call Camera

LG Audio Device

Tag On

AN-BL _**
Wireless IR Blaster

AN-WFS00
Wi-Fi/Bluetooth

(Depending upon model)

DONGLE

ASSEMBLING

Parts

and

AND

PREPARING

buttons
Screen
-_@

NOTE

Joystick
below

button

Joystick

(

Speakers

Intelligent
sensor
environment.

Using

Power Indicator
Remote control
Sensor
Intelligent
Sensor 1
- Adjusts

the joystick

the image

quality

and brightness

of TV.

Button

and

based

on the surrounding

button

You can operate the TV by pressing the button or moving the joystick

left, right, up, or down.

Power On

When the TV is turned off, place your finger on the joystick
_ress it once and release it.

button

and

Power Off

When the TV is turned on, place your finger on the joystick
3ress it once for a few seconds and release it.

button

and

Volume Control

If you place your finger over the joystick button
you can adjust the volume level you want.

Channels Control

is located

the screen

If you place your finger
you can scrolls through

NOTE
When your finger over the joystick

and move

it left or right,

over the joystick button and move
the saved channels you want.

it up or down,

button and push it to the up, down, left, or right, be careful

not to press the joystick button. If you press the joystick button first, you can not adjust the
volume level and saved chennels.

When the TV is turned on, press the joystick
button one time.
You can adjust the Menu items (_, _, X, r_) moving the joystick

Settings
_J

Close
TV
Off
Input List

Accesses

up, down,

left or right.

the main menu.

Clears
on-screen
Turns the
power
Changes

button

displays
off.

the input source.

and returns

to TV viewing.

10 ASSEMBLING
ANDPREPARING
Lifting

and

moving

theTV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.
A

Use at least two people to move a large TV.
When transporting the TV by hand, hold the
TV as shown in the following illustration.

CAUTION
Avoid touching the screen at all times, as
this may result in damage to the screen.
Do not place the product on the floor with
its front facing down without padding.
Failure to do so may result in damage to
the screen.
It is recommended

to move the TV in the

box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
the power cord and alt cables.
When holding the TV, the screen should
face away from you to avoid damage.

Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

When handling the TV, be careful not to
damage the protruding joystick button.
When transporting the TV, do not expose
the TV to jolts or excessive vibration.
When transporting the TV, keep the TV
upright; never turn the TV on its side or tilt
towards the left or right.

ASSEMBLING

Setting

AND

PREPARING

up theTV
f

You can mount your TV to a wall or attach
the stand if you wish to place the TV on an
entertainment center or other furniture.

(For 32LB580B,
32LB5800)

Attaching

_M4
x [-20
(For 39/42/55LB5800,

the

stand

47/_o/_/6OLB61oo,
__t

If you are not mounting the TV to a wall, use the
following instructions to attach the stand.

65LB6190)
4 EA
M4 x 1_14

CAUTION
• When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

A stand base

Mounting

a table

Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inch) (minimum) space
from the wall for proper ventilation.

(4 inches}

Connect the power cord to a wall outlet.

CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.

ASSEMBLING

AND

PREPARING

Mounting
(Depending upon model)

on a wall

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the watl
mount bracket at the rear of the TV. Install the

I/......
Ii
a

wall mount bracket on a solid wall perpendicular
to the floor. If you are attaching the TV to other
building materials, please contact qualified
personnel to install the walt mount. Detailed
instructions will be included with the wall mount.
We recommend
mount.

that you use an LG brand wall

10 cm

(4 inches)

Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

Mount the wall brackets with the bolts to the
wall.
Match the location of the walt bracket and
the eye-bolts on the rear of the TV.
Connect the eye-bolts and watl brackets

Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following

table.

tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.

CAUTION

32LB580B
32LB5800
39LB5800

42LB5800
55LB5800
47LB6100
50LB6100
55LB6100

VESA (A x B)

200 x 200

400 x 400

Standard screw

• Make sure that children do not climb on
or hang on the TV.

@N°T
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
Brackets, bolts and ropes are optional.
You can obtain additional accessories
from your local dealer.

Number of screws
Wall mount
bracket (optional)

M6
4

LSW240B
MSW240

LSW440B
MSW240

ASSEMBLgNG
ANDPREPARING
13
Model

60LB6100, 65LB6190

VESA (A x B)

400 x 400

Standard screw

Number of screws
Wall mount
bracket (optional)
.--_

LSW440B

CAUTION
Disconnect the power first, and then
move or install the TV. Otherwise electric

shock may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
• Use the screws and watl mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the
warranty.

..--@ NOTE
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The watl mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending
upon the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
supplied with the wall mount.
When attaching a third-party wall mounting
bracket to the TV, insert the watt mount
inner spacers into the TV wall mount holes
to move your TV in vertical angle. Please
make sure not to use the spacers for LG wall
mounting bracket.
(For 42LB5800)

MAKING

CONNECTIONS

MAKING

CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external device's connection, refer to the manual provided with
each device.
--@

NOTE

If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
The external device connections shown may differ slightly from illustrations in this manual.
Connect external devices to the TV regardless of the order of the TV port.
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
Refer to the external equipment's manual for operating instructions.

Connecting

to an antenna

or cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations
may differ from the actual items. And a RF cable is optional.

Antenna

F
Antenna
(75[3):
(*Not Provided)i

e
Terminal
,-- _

CAUTION

Make sure not to bend the copper wire of
the RF cable.

Copper

wire

• Complete
all connections
between
devices,
and then connect
the power cord
to the power outlet to prevent
damage to
your TV.

Use a signal splitter to use 2 TVs or more.
'[@DTV Audio
NOTE Supported Codec: MPEG,
Dolby Digital.

MAKING

Other

CONNECTIONS

connections

* Image shown may differ from your TV.
Connect your TV to external devices. For the best picture and audio quality, connect the external
device and the TV with the HDMI cable as shown. Depending upon the model, a cable may not be
provided.

Digital Audio
System

_VIDEO

®®@
_

LAUDIO,J

VCR / DVD / Blu-Ray
HD Cable Box

16 MAKING
CONNECTIONS

__°__o,
HD Cable
Blu-Ray
PC

Box / DVD
/ HD STB

REMOTE
CONTROL
17
REMOTE

CONTROL

The descriptions
in this manual are based on the buttons on the remote control.
Please
read this manual carefully and use the TV correctly. To install batteries,
open the battery
J_ ends to the label inside
cover, replace batteries
(1.5 V AAA) matching
the r,__ and t_'
the compartment,
and close the battery cover. Failure to match the correct polarities of
the battery may cause the battery to burst or leak, resulting
in fire, personal injury, or
ambient
pollution.To
remove the batteries,
perform
the installation
actions in reverse.
_,_

_ _c_Q

CAUTION
Do not mix old and new batteries,

This remote
sensor,

uses infrared

light.

When

as this may

damage

in use, it should

the remote

be pointed

control.

in the direction

of the TV's

remote

(POWER) Turns the TV on or off.
CAPTION Activates or deactivates
the subtitles.
O AV MODE Selects an AV mode.
RATIO Besizes an image.
INPUT Changes the input source. Turns the TV on if it is off.
I

Number button Enters numbers.
- (Dash) Inserts a dash between
numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBKAIternates
between the two last channels selected (pressing
repeatedly).
4" VOL _ Adjusts the volume level.
FAV Accesses your favorite channel list.
INFO (D Shows information
on the current program.
MUTE ._ Mutes all sounds.
A CH V Scrolls through the saved channels.
• PAGE _ Moves to the previous or next screen.
SETTINGS Accesses the main menu•
SMART 1_ Accesses the Smart Home menu.
;ll MY APPS Shows the list of Apps.
Navigation
buttons Scrolls through menus or options. (up/down/left/right)
OK® Selects menus or options and confirms
your input.
BACK Returns to the previous screen.
Q.MENU
Accesses the quick menu.
EXIT Clears all on-screen displays and returns to TV viewing.

t
\

I
•

Color buttons These access special functions
in some menus.
(_: Red, (';;_i):Green, _;!_: Yellow, @_: Blue)
Control buttons (ll0 I_, ||, _, _-) Controls the SIMPLI NK compatible
devices
(USB,SIMPLINK).
_mr_unK Accesses the AV devices connected
to the TV;
Opens the SIMPLINK menu.
SLEEP Sets the length of time until the TV to turns off.
VD/_
Enables VD function. SAP(Secondary
Audio Program) Feature can also
be enabled by pressing the VD key.
IV Returns to the last TV channel.

18 USINGTHE
USER
GUIDE
USING
GUIDE

THE

USER

User Guide allows you to easily access detailed
TV information.

Press SMART _

button to access the Smart

Home menu,

Select SETTINGS _

Select User Guide and press the OK® button.

SUPPORT.

SPECIFICATIONS

SPECIFICATIONS
Product specifications

may be changed without

Power :requirement
Television

System

Program
External

_
Impedance

! Operating

2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV

1-135

__O- 40 °C (32 °F ~ 104 °F)

Humidity
emperature

Storage

64 & 256 QAM

Temperature
Environment

100- 240 V - 50 / 60 Hz

_/NTSC-M,

Coverage
Antenna

prior notice due to upgrade of product functions.

Leas than 80 %
_

Humidity

60 °C (- 4 °F -

140 °F)

Less than 85 %
32LB580B
(32EB580B-UG)
32LB5800

MODELS

(39LB5800-UG)

:(32LB5800-UG)
732 x 481 x 207 (mm)
Nith stand
Dimensions
WxHxD)
Nithout

stand

/Vith stand
Weight

_hout

ICurrent

Value
:]

stand

Power consumption
MODELS

L
_

34.8 x 22.3 x 8.5 (incht

732 x 431 x 55.5 (ram)

885 x 524 x 55.5 (ram)

28.8x

34.8 x 20.6 x 2.1 (inch)

16.9 x 2.1 (inch)

6.2 kg (13.6 Ibs)

8.3 kg (18.2 Ibs)

6.0 kg (13.2 Ibs)

8 kg (17.6 Ibs)
1.0A/100W

1.25A/76W
42LB5800
(42LB5800-UG)
961x610x218(mm)

With

stand

Dimensions
(W x H x D)
Without
With
Weight
Current

stand

Without
Value

stand

Power consumption

885 x 567 x 218 (ram)

18.9 x 8.1 (inch)

28.8x

47LB6100
(47LB6100-UG}
1,073 x 676 x 255 (ram)

37.8 x 24 x 8.5 (inch)

42.2 x 26.6 x 10 (inch)

961 x 567 x 55.5 (mm)

1,073 x 629 x 55.8 (ram)

37.8 x 22.3 x 2.1 (inch)

42.2 x 24.7 x 2.1 (inch)

9.5 kg (20.9

Ibs)

9.2 kg (20.2 Ibs)
1.1A/110W

12.7 kg (27.9

Ibs)

12.3 kg (27.1 Ibs)
1.2A/120W

20 SPECIFICATIONS
/ EXTERNAL

CONTROL

DEVICE

SETUP

55LB5800

60LB6i00
MODELS

With

stand

Dimensions
(W x H x D)
Without
With
Weight
Current

With

1,243 x 772 x 255 (mm)

44.4 x 27.8 x 10 (inch)

48.9 x 30.3 x 10 (inch)

1,128 x 660 x 55.8 (mm)

1,243 x 725 x 56.8 (mm)

44.4 x 25.9 x 2.1 (inch)

48.9 x 28.5 x 2.2 (inch)

14.2 kg (31.3 Ibs)

18.4 kg (40.5 Ibs)

13.8 kg (30.4 Ibs)

18 kg (39.6 Ibs)

1.3A/130W

With

stand

1,373 x 848 x 280 (mm)

1,462 x 901 x 314 (mm)

54 x 33.3 x 11 (inch)

57.5 x 35.4 x 12.3 (inch)

1,373 x 801 x 58.8 (mm)

1,462 x 850 x 59.2 (mm)

54 x 31.5 x 2.3 (inch)

57.5 x 33.4 x 2.3 (inch)

23.5 kg (51.8 Ibs)

30.3 kg (66.8 Ibs)

23.0 kg (50.7 Ibs)

28.9 kg (63.7 Ibs)

Power consumption

Standard

65LB6190
(65LB6190-UD)

6OLB_oo

stand

Without

1.4A/140W

(60LB6100-UG)

stand

Without

Value

1,128 x 708 x 255 (mm)

Power consumption

Dimensions
(W x H x D)

Current

55LB6100
(55LB6100-UG}

stand

_ODELS

Weight

(50LB6! 00-UG)

stand

Without
Value

stand

155LB_800-UGI

1.SA/150W

1.6A/160W

IEEES02.1 la/b/g/n
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz

OutPut

power

(Max.)

802.11a
802.11b
802.1 lg
802.11n802.11n-

16.5dBm
16dBm
15.5 dBm
2.4GHz
15.5 dBm
5GHz: 16.5 dBm

Because band channel used by the country could be different, the user can not change or adjust
the operating frequency and this product is set for the regional frequency table.
Contains FCC ID: BEJWN8122E1 /Contains IC: 2703H-WN8122E1

EXTERNAL

CONTROL

DEVICE

To obtain the external control device setup information,

SETUP

please visit www./g.com.

MAINTENANCE/TROUBLESHOOTING

MAINTENANCE
Cleaning
Clean your

--[_

Your TV
TV regularly

to keep it at peak performance

and to extend

the product

lifespan.

CAUTION
Make
When

sure to turn the power off and disconnect the power cord and allother cables first,
the TV is leftunattended or unused for a long time, disconnect the power cord from the

wall outletto prevent possible damage

and

surges.

Screen,

frame,

To remove
To remove
detergent.

dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
major dirt, wipe the surface
with a soft cloth dampened
in clean water
Then wipe immediately
with a dry cloth.

_-_

cabinet,

from lightningor power

stand

or a diluted

mild

CAUTION

Do not push, rub, or hit the surface with your fingernail
or a sharp object,
as this may result in
scratches
on the screen and image distortions.
• Do not use any chemicals,
such as waxes, benzene,
alcohol, thinners,
insecticides,
air
fresheners,
lubricants,
as these may damage the screen's
finish and cause discoloration.
Do not spray liquid onto the surface.
If water enters the TV, it may result in fire, electric shock,
or malfunction.

Power

cord

Remove

the accumulated

dust or dirt on the power

cord regularly.

TROUBLESHOOTING
Problem

solution
Check the remote control sensor on the product and try again.
Check if there is any obstacle between the product and the remote control.
Check if the batteries are still working and properly installed ({+_'to f_
:.+9, f_
L-J to f_
L-J).

Cannot control the TV
with the remote control.

* Check if the product is turned on.
Check if the power cord is connected to a wall outlet.
Check if there is a problem in the wall outlet by connecting

No image display and no
sound is produced.

The TV turns off
suddenly.

other products.

Check if the Sleep Timer/Off Time is activated in the TIME settings.
If there the
is no
signalcontrol
while settings.
the TV is The
on, the
TV will
turnmay
off automatically
Check
power
power
supply
be interrupted. after 15
minutes of inactivity.

C
PROPER

II
II

TELEVISION

PLACEMENT

THE CONSUMER
• Manufacturers,
rnakin£ home

ELECTRONICS

retailers

and the

entertainment

stands

or installed

are inappropriately

electronics

please note that all televisions
accordin£

situated

may fall over, resultin_

INDUSTRY

rest of the consumer

CARES

industry

are committed

safe and enjoyable

• As you enjoy your television,
proper

MATTERS

new and old- must be supported

to the manufacturer's

on dressers,

bookcases,

recommendations

shelves, desks, speakers,

%levisions
chests,

on
that

carts, etc,

in injury

TUNE IN TO SAFETY
• ALWAYS

• ALWAYS

read and follow

the manufacturer's

• NEVER allow children

recommendations

all instructions

to climb

for proper

for the safe installation

of your television

use of your television

on or play on the television

orthe

furniture

on which the television

is placed
• NEVER

place

the television

on furniture

that

can easily be used

as steps,

such as a chest

drawers
ALWAYS

install the television

• ALWAYS

route cords

where it cannot

and cables

be pushed,

connected

pulled over or knocked

to the television

so that

down

they cannot

be tripped

over, pulled or £rabbed

WALL OR CEILING
• ALWAYS

contact

ability to safely mount
• ALWAYS

MOUNTYOUR

your retailer about

use a mount

safety certification

professional

TELEVISION

installation

if you have any doubts

that has been recommended

by an independent

laboratory

follow all instructions

• ALWAYS

make sure that the wall or ceilin_ where you are rnountin_

mounts

are not designed

block construction
• %levisions

supplied

bythe

by the television

If you are unsure, contact

can be heavy

television

to be mounted

A minimum

manufacturer

and has a

(such as UL CSA, ETL)

• ALWAYS

Some

about your

your television

and mount

manufacturers
the television

to walls and ceilin£s

a professional

of two people

is appropriate

with steel

studs or cinder

installer

is required

for a wall or ceilin£

mount

installation

MOVING
AN OLDER
YOUR HOME
• Marly new television
purchase

of a flat

buyers

TELEVISION

move their

panel television

TO A NEW

older CRr televisions

Special

care should

PLACE

into a secondary

be made

room

in the placement

after the

of older CRT

televisions
• ALWAYS

place

your older CRT television

on furniture

that is sturdy

and appropriate

for its size

where children

may be tempted

to use the

and weight
• NEVER
drawers
• ALWAYS

place your older CRT television

on a dresser

to climb
make sure your older CRT television

CE.org/safet¥

does not han£ over the edge of your Mrniture

Life's Good

Declaration
Trade

Name

Model

Responsible
Party

of Conformity

32LB580B-UG,
39LB5800-UG,
55LB5800-UG
47LB6100-UG,
55LB6100-UG,
65LB6190-UD
LG Electronics

32LB5800-UG,
42LB5800-UG,
50LB6100-UG,
60LB6100-UG,
Fol i _qLli es o

Inc.

Address

1000 Sylvan Ave.
Englewood
Cliffs NJ 07632
U.S.A

TEL

201-266-2534

corn

_e sfs, vsit ww,4_ Ig.com

or cai I

1-8OO-243-OOOO

U_SA, Consumer

1-888-865-3026

U_SA, (o _rnerc _ lJse

1-888-542-2623

CANAr)A

U%e

www.lg.com

The _r odel and serial nu_r her of the TV ale Iocaled
on H-e back and ore
Record therr

blow

side of the TV

should you evr

Ths

n_ed servic

rise
Cha

MODEL
SERIAL

enab[in
cons

plodu
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 23
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 3, 2, 1, 4
Create Date : Fri Apr 17 07:04:30 2015
Author :
Title :
Subject :

EXIF Metadata provided by EXIF.tools

LG 32LB5800 User Manual LCD TV Manuals And Guides 1504058L

Navigation menu

Versions of this User Manual:

Views

Navigation